GRACO INC. S10595
GRACO INC. S10595 branded products
KIT, MIX-MANIFOLD, HP
GG 24R992
GG 24R992
KIT, MIX-MANIFOLD, HP
Graco 24R992 High Pressure Mix Manifold Kit for Mix at Belt
For at-the-gun mixing of 2 component materials when used with a ProMix PD Proportioner
- Model: ProMix
- Series: PD2K
- For Use With: ProMix™ PD2K Proportioner
- Maximum Working Pressure (bar): 105
- Maximum Working Pressure (kPa): 10500
- Maximum Working Pressure (MPa): 10.5
- Maximum Working Pressure (psi): 1500
$3,830.00
CAP, FILL, RESERVOIR
GG 557797
GG 557797
CAP, FILL, RESERVOIR
Reservoir Fill Cap For use with Lube Master Pump Packages.Fill Cup
Lubriquip part number 534-147-000 Trabon part number 34147
$123.50
ROD, TIE, MXP, 3 SECTION
GG 557766
GG 557766
ROD, TIE, MXP, 3 SECTION
Graco 557766 Trabon® MXP Divider Valve - 3 Section Tie Rod (3 Required)
Application: For use with Trabon® MXP Divider Valves.
- 3-Section Tie Rod
- Three required per assembly
- Lubriquip part number 527-300-270
- Model: Trabon
- Series: MXP
- Application: In-Plant Machinery
$23.40
FILTER, 25 MICRON, 3 5/8 LG
GG 557804
GG 557804
FILTER, 25 MICRON, 3 5/8 LG
Graco 557804 Replacement Filter Cartridge, 25-micron Standard, Lubriquip part 540-272-001, replaces part 540-272-000 and Trabon part 40272, Genuine Trabon replacement element for Lubriquip assemblies 183-000-010, 183-000-011, 183-000-050, 183-000-051, 183-000-150, 183-000-151
Application: For use with Single and Dual Cartridge Filters.
- 25 micron Replacement Filter Element
- 2-5/8 in (67 mm) OD x 3-5/8 in (92 mm) Standard Length Element
- For Use With: Cartridge Oil Filters
$77.25
METER-FLO PUMP, 18/30 CU IN/MIN CCW NPT
GG 557813
GG 557813
METER-FLO PUMP, 18/30 CU IN/MIN CCW NPT
Graco 557813 Meter-Flo® Electric Pump, 30 cu in/min (492 cc/min) @ 1,725 rpm, NPT Ports, CCW
With its solid pump housing, these rugged gear pumps are designed for dependable operation in high demand applications. The gear pump is available with a direct-coupled 1/2 horsepower motor capable of 1,725 rpm’s with output volumes of 245 cubic inches per minute (4015 cc/min).
Application: Direct-drive, smoothly operating pumps ideal for applications requiring continuous delivery of hydraulic or lube oils.- Ideal for applications requiring continuous oil delivery up to 1,000 lubrication points
- Positive displacement helps assure constant delivery of proper volume.
- Match-ground heat-treated steel gears are enclosed in a rigid, cast-iron housing to assure dependability and long life.
- Adjustable pressure relief valve protects pump against overload conditions.
- Meter-flo pumps are available with a special coupling that allows easy replacement of older Meter-Flo pumps.
- Lubriquip part number 540-800-001
- Model: Meter-Flo
- Application: In-Plant Machinery
- Compatible Material: Oil
- Compatible Metering Device: Series Progressive
- Fluid Outlet Size (in): 0.5
- Fluid Outlet Size (mm): 12.7000
- Fluid Outlet Thread Type: NPT
- Maximum Flow Rate (ci/min): 30
- Maximum Fluid Output Pressure (bar): 103
- Maximum Fluid Output Pressure (psi): 1500
- Maximum Fluid Output Pressure (bar): 103
- Maximum Fluid Output Pressure (psi): 1500
- Maximum Operating Temperature (°C): 66
- Maximum Operating Temperature (°F): 150
- Maximum SUS Grade (SUS): 3000
- Maximum Working Pressure (bar): 103
- Maximum Working Pressure (kPa): 10300
- Maximum Working Pressure (MPa): 10.3
- Maximum Working Pressure (psi): 1500
- Minimum Operating Temperature (°C): 10
- Minimum Operating Temperature (°F): 50
- Minimum SUS Grade (SUS): 300
- Power Type: Electric
$1,520.00
METER-FLO PUMP, 55/83 CU IN/MIN CCW NPT
GG 557815
GG 557815
METER-FLO PUMP, 55/83 CU IN/MIN CCW NPT
Graco 557815 Meter-Flo® Electric Pump, 84 cu in/min (1377 cc/min) @ 1,725 rpm, NPT Ports, CCW
With its solid pump housing, these rugged gear pumps are designed for dependable operation in high demand applications. The gear pump is available with a direct-coupled 1/2 horsepower motor capable of 1,725 rpm’s with output volumes of 245 cubic inches per minute (4015 cc/min).
Application: Direct-drive, smoothly operating pumps ideal for applications requiring continuous delivery of hydraulic or lube oils.- Ideal for applications requiring continuous oil delivery up to 1,000 lubrication points
- Positive displacement helps assure constant delivery of proper volume.
- Match-ground heat-treated steel gears are enclosed in a rigid, cast-iron housing to assure dependability and long life.
- Adjustable pressure relief valve protects pump against overload conditions.
- Meter-flo pumps are available with a special coupling that allows easy replacement of older Meter-Flo pumps.
- Lubriquip part number 540-800-021
- Model: Meter-Flo
- Application: In-Plant Machinery
- Compatible Material: Oil
- Compatible Metering Device: Series Progressive
- Fluid Outlet Size (in): 0.5
- Fluid Outlet Size (mm): 12.7000
- Fluid Outlet Thread Type: NPT
- Maximum Flow Rate (ci/min): 84
- Maximum Fluid Output Pressure (bar): 103
- Maximum Fluid Output Pressure (psi): 1500
- Maximum Fluid Output Pressure (bar): 103
- Maximum Fluid Output Pressure (psi): 1500
- Maximum Operating Temperature (°C): 66
- Maximum Operating Temperature (°F): 150
- Maximum SUS Grade (SUS): 3000
- Maximum Working Pressure (bar): 103
- Maximum Working Pressure (kPa): 10300
- Maximum Working Pressure (MPa): 10.3
- Maximum Working Pressure (psi): 1500
- Minimum Operating Temperature (°C): 10
- Minimum Operating Temperature (°F): 50
- Minimum SUS Grade (SUS): 300
- Power Type: Electric
$1,520.00
METER-FLO PUMP, 76/116 CU IN/MIN CCW NPT
GG 557816
GG 557816
METER-FLO PUMP, 76/116 CU IN/MIN CCW NPT
Meter-Flo® Electric Pump, 117 cu in/min (1917 cc/min) @ 1,725 rpm, NPT Ports, CCWWith its solid pump housing, these rugged gear pumps are designed for dependable operation in high demand applications. The gear pump is available with a direct-coupled 1/2 horsepower motor capable of 1,725 rpm’s with output volumes of 245 cubic inches per minute (4015 cc/min).
Direct-drive, smoothly operating pumps ideal for applications requiring continuous delivery of hydraulic or lube oils. Ideal for applications requiring continuous oil delivery up to 1,000 lubrication points Positive displacement helps assure constant delivery of proper volume. Match-ground heat-treated steel gears are enclosed in a rigid, cast-iron housing to assure dependability and long life. Standard SAE 4-bolt mounting simplifies installation. Adjustable pressure relief valve protects pump against overload conditions. Meter-flo pumps are available with a special coupling that allows easy replacement of older Meter-Flo pumps. Lubriquip part number 540-800-041
$1,520.00
METER-FLO PUMP, 9/14 CU IN/MIN CCW NPT
GG 557814
GG 557814
METER-FLO PUMP, 9/14 CU IN/MIN CCW NPT
Graco 557814 Meter-Flo® Electric Pump, 14 cu in/min (229 cc/min) @ 1,725 rpm, NPT Ports, CCW
With its solid pump housing, these rugged gear pumps are designed for dependable operation in high demand applications. The gear pump is available with a direct-coupled 1/2 horsepower motor capable of 1,725 rpm’s with output volumes of 245 cubic inches per minute (4015 cc/min).
Application: Direct-drive, smoothly operating pumps ideal for applications requiring continuous delivery of hydraulic or lube oils.- Ideal for applications requiring continuous oil delivery up to 1,000 lubrication points
- Positive displacement helps assure constant delivery of proper volume.
- Match-ground heat-treated steel gears are enclosed in a rigid, cast-iron housing to assure dependability and long life.
- Adjustable pressure relief valve protects pump against overload conditions.
- Meter-flo pumps are available with a special coupling that allows easy replacement of older Meter-Flo pumps.
- Lubriquip part number 540-800-011
- Model: Meter-Flo
- Application: In-Plant Machinery
- Compatible Material: Oil
- Compatible Metering Device: Series Progressive
- Fluid Outlet Size (in): 0.5
- Fluid Outlet Size (mm): 12.7000
- Fluid Outlet Thread Type: NPT
- Maximum Flow Rate (ci/min): 14
- Maximum Fluid Output Pressure (bar): 103
- Maximum Fluid Output Pressure (psi): 1500
- Maximum Fluid Output Pressure (bar): 103
- Maximum Fluid Output Pressure (psi): 1500
- Maximum Operating Temperature (°C): 66
- Maximum Operating Temperature (°F): 150
- Maximum SUS Grade (SUS): 3000
- Maximum Working Pressure (bar): 103
- Maximum Working Pressure (kPa): 10300
- Maximum Working Pressure (MPa): 10.3
- Maximum Working Pressure (psi): 1500
- Minimum Operating Temperature (°C): 10
- Minimum Operating Temperature (°F): 50
- Minimum SUS Grade (SUS): 300
- Power Type: Electric
$1,520.00
FILTER, 25 MICRON, 9-5/8" LG
GG 557807
GG 557807
FILTER, 25 MICRON, 9-5/8" LG
Replacement Filter Cartridge, 25-micron Ex-Lng; Lubriquip part 540-275-001, replaces part 540-275-000 and Trabon part 40275; Genuine Trabon replacement filter element for Lubriquip filter assemblies 183-000-080, 183-000-081, 183-000-120, 183-000-121, 183-000-210, 183-000-211 For use with Single and Dual Cartridge Filters.25 micron Replacement Filter Element
2-5/8 in (67 mm) OD x 9-5/8 in (92 mm) Extra Long Element
$131.00
SWITCH, PRESS ADJ, 1000-4700 PSI
GG 557829
GG 557829
SWITCH, PRESS ADJ, 1000-4700 PSI
Moisture-Resistant Single Control Pressure Switch, 4700 psi (324 bar)Turns off your pump or controller and activates venting once the lube system reaches the desired pressure level.
Durable design allows operation in harsh environment. Easy to visually adjust line pressure and reset pressure to ensure your lube system has vented properly LED lights visually display pressure switch functions Modern 4-pin M12 micro-connector easily connects to the G3 and other controllers; 124595 4-pin M12 micro-connector sold separately Moisture resistant and factory set to ensure accuracy for long life and reliability Sends an alarm signal to alert either a high or low pressure condition Available for hydraulic pressures from 400 to 4700 psi (28 to 324 bar) 1/4 in NPT thread allows quick connection to injector systems Lubriquip part number 542-210-120
$617.00
METER-FLO PUMP, 26/40 CU IN/MIN CCW NPT
GG 557818
GG 557818
METER-FLO PUMP, 26/40 CU IN/MIN CCW NPT
Graco 557818 Meter-Flo® Electric Pump, 40 cu in/min (655 cc/min) @ 1,725 rpm, NPT Ports, CCW
With its solid pump housing, these rugged gear pumps are designed for dependable operation in high demand applications. The gear pump is available with a direct-coupled 1/2 horsepower motor capable of 1,725 rpm’s with output volumes of 245 cubic inches per minute (4015 cc/min).
Application: Direct-drive, smoothly operating pumps ideal for applications requiring continuous delivery of hydraulic or lube oils.- Ideal for applications requiring continuous oil delivery up to 1,000 lubrication points
- Positive displacement helps assure constant delivery of proper volume.
- Match-ground heat-treated steel gears are enclosed in a rigid, cast-iron housing to assure dependability and long life.
- Adjustable pressure relief valve protects pump against overload conditions.
- Meter-flo pumps are available with a special coupling that allows easy replacement of older Meter-Flo pumps.
- Lubriquip part number 540-800-091
- Model: Meter-Flo
- Application: In-Plant Machinery
- Compatible Material: Oil
- Compatible Metering Device: Series Progressive
- Fluid Outlet Size (in): 0.5
- Fluid Outlet Size (mm): 12.7000
- Fluid Outlet Thread Type: NPT
- Maximum Flow Rate (ci/min): 40
- Maximum Fluid Output Pressure (bar): 103
- Maximum Fluid Output Pressure (psi): 1500
- Maximum Fluid Output Pressure (bar): 103
- Maximum Fluid Output Pressure (psi): 1500
- Maximum Operating Temperature (°C): 66
- Maximum Operating Temperature (°F): 150
- Maximum SUS Grade (SUS): 3000
- Maximum Working Pressure (bar): 103.4
- Maximum Working Pressure (kPa): 10340
- Maximum Working Pressure (MPa): 10.3
- Maximum Working Pressure (psi): 1500
- Minimum Operating Temperature (°C): 10
- Minimum Operating Temperature (°F): 50
- Minimum SUS Grade (SUS): 300
- Power Type: Electric
$1,520.00
GAUGE, 3000 PSI 1/4NPT C/B LIQ
GG 557866
GG 557866
GAUGE, 3000 PSI 1/4NPT C/B LIQ
Graco 557866 Pressure Gauge, Back-Mounted, 0-3000 psi, 2 1/2 in. Dial Diameter
- Dial Diameter (cm): 6
- Dial Diameter (in): 2.5
- Dial Diameter (mm): 64
- Inlet Size (cm): 0.635
- Inlet Size (in): 1/4
- Inlet Size (mm): 6.35
- Inlet Thread Type: NPT
- Maximum Working Pressure (bar): 207
- Maximum Working Pressure (kPa): 20700
- Maximum Working Pressure (MPa): 20.7
- Maximum Working Pressure (psi): 3000
$250.00
NGL #00 EP Lithium Grease 3 Lb. Bucket
GG 557941
GG 557941
NGL #00 EP Lithium Grease 3 Lb. Bucket
$341.00
GREASE JOCKEY ELECTRIC VALVE, ASSY, SOLENOID, 3 WAY, 24 VDC
GG 557931
GG 557931
GREASE JOCKEY ELECTRIC VALVE, ASSY, SOLENOID, 3 WAY, 24 VDC
Graco 557931 3-Way Solenoid Valve Kit - 24 VDC
Application: For use with Grease Jockey On-Road Mobile Lubrication Systems.
- 24 VDC replacement solenoid
- Lubriquip part number 550-250-265
- Application: On-Road Vehicles, Off-Road Equipment
- Compatible Material: Air
- Material: Brass
- Maximum Voltage (V dc): 24
- Port Size (cm): 0.1191
- Port Size (in): 0.046875
- Port Size (mm): 1.1913
- Power Rating (W): 7
$168.50
KIT, RELIEF VLV VIKING PUMP
GG 557998
GG 557998
KIT, RELIEF VLV VIKING PUMP
Graco 557998 Meter-Flo® Relief Valve Repair Kit
Application: For use with Meter-Flo Pumps.
- Meter-Flo Relief Valve Repair Kit - 540-800-XX1 Models
- Lubriquip part number 560-001-920
- For Use With: Viking Pumps
- Includes: Poppet, Cap, Spring, Hardware
- Kit Type: Repair Kit
$76.75
CABLE, CONN 6'
GG 558021
GG 558021
CABLE, CONN 6'
Graco 558021 Mini-Straight Connection Cable - 6 ft, 3-Pin
Application: For use with Proximity Switches.
- 3-pin cable, straight connector, 6 feet (1.83 m)
- Lubriquip part number 570-999-080
- Amperage (A): 13
- For Use With: MSP Divider Valves, Proximity Switches, Air Oil Lubrication System
- IP Rating: IP68 NEMA 6P
- Jacket Material: PVC
$100.00
CABLE, CONN 12'
GG 558022
GG 558022
CABLE, CONN 12'
Mini-Straight Connection Cable - 12 ft, 3-Pin For use with Proximity Switches.3-pin cable, straight connector, 12 feet (3.66 m)
Lubriquip part number 570-999-090
$135.50
CABLE, CONN CABLE 4PN 24V
GG 558025
GG 558025
CABLE, CONN CABLE 4PN 24V
Graco 558025 Proximity Switch Connector Cable - 24 V, 12 ft, 4-Pin, Straight Connector, Polarity, PNP
Application: For use with Proximity Switches.
- 4-pin cable, straight connector, polarity, PNP, 12 feet (3.66 m)
- Lubriquip part number 570-999-953
- For Use With: Proximity Switches
$552.00
CABLE, 5 PIN W/ CONN
GG 558024
GG 558024
CABLE, 5 PIN W/ CONN
Proximity Switch Connector Cable - 12 ft, 5-Pin For use with Proximity Switches.5-pin cable, straight connector, 12 feet (3.66 m)
Lubriquip part number 570-999-170
$194.50
NUT, BRASS 5/32 TUBE COMPR
GG 558189
GG 558189
NUT, BRASS 5/32 TUBE COMPR
Graco 558189 Thrif-T Luber Hardware - TLCN-00 - Compression Nut
Application: For use with Thrif-t Luber Pumps.
- Thrif-T Luber Hardware - TLCN-00 - Compression Nut
- Lubriquip part number 435-390-070
- Inside Diameter (in): 0.3125
- Inside Diameter (mm): 7.9375
- Material: Brass
- Nut Type: Hex Nut
Call for pricing
O-RING, -908 VITON
GG 558730
GG 558730
O-RING, -908 VITON
Graco 558730 O-Ring, Viton
Application: For use with Saniforce and Husky Electric Diaphragm Pumps.
- Lubriquip part number GOV-060-020
- For Use With: Husky 1050e Pump, SaniForce 1040e Pump
- Inside Diameter (cm): 1.6
- Inside Diameter (in): 0.644
- Inside Diameter (mm): 16.4
- Material: Viton
- Number of Pieces: 1
- Outside Diameter (cm): 2.1
- Outside Diameter (in): 0.818
- Outside Diameter (mm): 20.8
$3.65
O-RING, -113 VITON-A 75 DURO
GG 558692
GG 558692
O-RING, -113 VITON-A 75 DURO
- Lubriquip part number 422-041-130
- Trabon part number 25613-V
- Manzel part number 22X4-113
- Inside Diameter (cm): 1.4
- Inside Diameter (in): 0.549
- Inside Diameter (mm): 13.9
- Material: Viton
- Number of Pieces: 1
- Outside Diameter (cm): 1.9
- Outside Diameter (in): 0.755
- Outside Diameter (mm): 19.2
Call for pricing
COUPLER, 1/4, W/CHECK
GG 558906
GG 558906
COUPLER, 1/4, W/CHECK
Mating Coupler/Coupling for grease fill stud on Trabon™ Reservoirs, 1/4 in. NPT female, with Check For use with Modu-Flo, E-Series, Lube Master, LubriSystem, PH and other Trabon grease pumps. 1/4 inch NPT female thread connects to end of hose on grease pump used to refill the reservoir.Mating Coupler for Trabon Grease Fill Stud
Former part numbers: Lubriquip 506-322-000, Trabon 6322 Mates to fill stud 557374 Lubriquip part number 506-322-000 Trabon part number 6322
$32.10
BRACKET, MTG RTN FILTER
GG 558927
GG 558927
BRACKET, MTG RTN FILTER
Filter Mounting BracketFilter Mounting Bracket
Lubriquip part number 521-010-440
$100.00
METER-FLO PUMP, 55/83 CU IN/MIN CW NPT
GG 558949
GG 558949
METER-FLO PUMP, 55/83 CU IN/MIN CW NPT
Meter-Flo® Electric Pump, 84 cu in/min (1377 cc/min) @ 1,725 rpm, NPT Ports, CWWith its solid pump housing, these rugged gear pumps are designed for dependable operation in high demand applications. The gear pump is available with a direct-coupled 1/2 horsepower motor capable of 1,725 rpm’s with output volumes of 245 cubic inches per minute (4015 cc/min).
Direct-drive, smoothly operating pumps ideal for applications requiring continuous delivery of hydraulic or lube oils. Ideal for applications requiring continuous oil delivery up to 1,000 lubrication points Positive displacement helps assure constant delivery of proper volume. Match-ground heat-treated steel gears are enclosed in a rigid, cast-iron housing to assure dependability and long life. Standard SAE 4-bolt mounting simplifies installation. Adjustable pressure relief valve protects pump against overload conditions. Meter-flo pumps are available with a special coupling that allows easy replacement of older Meter-Flo pumps. Lubriquip part number 540-800-031
$1,550.00
COUPLING, ANCHOR CROSS 1/8
GG 560543
GG 560543
COUPLING, ANCHOR CROSS 1/8
Graco 560543 Cross Anchor Fitting, 1/8 in. NPSF
- Cross Anchor Fitting, 1/8 in. NPSF
- Lubriquip part number 509-189-000
- Trabon part number 9189
- Connection Type: Threaded
- Finish/Coating: Zinc
- For Use With: Hose
- Material: Steel
$53.50
BLOCK, INLET SECTION, MJ
GG 560643
GG 560643
BLOCK, INLET SECTION, MJ
Graco 560643 Trabon® MJ Divider Valve - Standard Inlet
Application: For use with Trabon® MJ Divider Valves.
- Standard Inlet (Must be ordered in multiples of five)
- NPSF
- Lubriquip part number 510-992-002
- Model: Trabon
- Series: MJ
- Application: On-Road Vehicles, Off-Road Equipment
- Inlet Size (cm): 0.3175
- Inlet Size (in): 1/8
- Inlet Size (mm): 3.175
- Inlet Thread Type: NPSF
$70.00
BLOCK, INLET MACH MX
GG 560620
GG 560620
BLOCK, INLET MACH MX
Graco 560620 Trabon® MX Divider Valve - MX Inlet
Application: For use with Trabon® MX Divider Valves.
- MX inlet
- Lubriquip part number 510-914-003
- Model: Trabon
- Series: MX
- Application: In-Plant Machinery
- Inlet Size (cm): 0.9525
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.525
- Inlet Thread Type: NPT
$368.00
BLOCK, END SECTION MJ
GG 560645
GG 560645
BLOCK, END SECTION MJ
Trabon® MJ Divider Valve - Standard End Section For use with Trabon® MJ Divider Valves. Standard end section (Must be ordered in multiples of five) NPSF Lubriquip part number 510-994-002
$70.00
BLOCK, INLET, MSP/MHH NPSF
GG 560919
GG 560919
BLOCK, INLET, MSP/MHH NPSF
Manzel® MHH Divider Valve - Inlet - 1/4-18 NPSF For use with Trabon® MSP/MHH Divider Valves. Standard Inlet 1/4-18 NPSF (NPT) Lubriquip part number 527-001-800
$38.10
MJ VALVE, BLOCK, STD SECTION, MJ-15S
GG 562502
GG 562502
MJ VALVE, BLOCK, STD SECTION, MJ-15S
Graco 562502 Trabon® MJ Series-Flo Divider Valve - MJ-15S - 0.030 in³ (0.49 cm³)
The Trabon MJ series features a compact and easily customizable design that can be tailor fit to meet a variety of specific lube requirements. Capable of handling grease grades up to NLGI #1.
Application: Compact and customizable divider block series for machine tool, product or press equipment.- Space efficient–from 6 to 16 points from one block assembly
- Built-in outlet check valves ensure accurate lube delivery, every time
- Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
- Lubriquip part number 001-015-001
- Model: Trabon
- Series: MJ
- Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery
- Compatible Material: Oil, Grease
- Cycle Indicator: None
- Discharge Per Piston Stroke (in³): 0.030
- Divider Valve Series: MJ
- Material: Carbon Steel
- Maximum Cycle Rate (cycles/min): 200
- Maximum NLGI Grade: #1
- Maximum Operating Temperature (°C): 93
- Maximum Operating Temperature (°F): 200
- Maximum Working Pressure (bar): 138
- Maximum Working Pressure (kPa): 13800
- Maximum Working Pressure (psi): 2000
- Minimum Working Pressure (psi): 200
- Number of Outlets: 1
- Outlet Size (cm): 0.3175
- Outlet Size (in): 1/8
- Outlet Size (mm): 3.175
- Outlet Thread Gender: Female
- Outlet Thread Type: NPSF
$198.50
MJ VALVE, ASSY MJ 5T
GG 562503
GG 562503
MJ VALVE, ASSY MJ 5T
Trabon® MJ Series-Flo Divider Valve - MJ-5T - 0.005 in³ (0.082 cm³)The Trabon MJ series features a compact and easily customizable design that can be tailor fit to meet a variety of specific lube requirements. Capable of handling grease grades up to NLGI #1.
Compact and customizable divider block series for machine tool, product or press equipment. Space efficient–from 6 to 16 points from one block assembly Built-in outlet check valves ensure accurate lube delivery, every time Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event Lubriquip part number 001-005-002
$175.50
MJ VALVE, ASSY MJ 10T
GG 562504
GG 562504
MJ VALVE, ASSY MJ 10T
Graco 562504 Trabon® MJ Series-Flo Divider Valve - MJ-10T - 0.010 in³ (0.16 cm³)
The Trabon MJ series features a compact and easily customizable design that can be tailor fit to meet a variety of specific lube requirements. Capable of handling grease grades up to NLGI #1.
Application: Compact and customizable divider block series for machine tool, product or press equipment.- Space efficient–from 6 to 16 points from one block assembly
- Built-in outlet check valves ensure accurate lube delivery, every time
- Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
- Lubriquip part number 001-010-002
- Model: Trabon
- Series: MJ
- Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery
- Compatible Material: Oil, Grease
- Cycle Indicator: None
- Discharge Per Piston Stroke (in³): 0.010
- Divider Valve Series: MJ
- Material: Carbon Steel
- Maximum Cycle Rate (cycles/min): 200
- Maximum NLGI Grade: #1
- Maximum Operating Temperature (°C): 93
- Maximum Operating Temperature (°F): 200
- Maximum Working Pressure (bar): 138
- Maximum Working Pressure (kPa): 13800
- Maximum Working Pressure (psi): 2000
- Minimum Working Pressure (psi): 200
- Number of Outlets: 2
- Outlet Size (cm): 0.3175
- Outlet Size (in): 1/8
- Outlet Size (mm): 3.175
- Outlet Thread Gender: Female
- Outlet Thread Type: NPSF
$175.50
MJ VALVE, ASSY MJ 15T
GG 562505
GG 562505
MJ VALVE, ASSY MJ 15T
Trabon® MJ Series-Flo Divider Valve - MJ-15T - 0.015 in³ (0.246 cm³)The Trabon MJ series features a compact and easily customizable design that can be tailor fit to meet a variety of specific lube requirements. Capable of handling grease grades up to NLGI #1.
Compact and customizable divider block series for machine tool, product or press equipment. Space efficient–from 6 to 16 points from one block assembly Built-in outlet check valves ensure accurate lube delivery, every time Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event Lubriquip part number 001-015-002
$175.50
MJ VALVE, ASSY IND MJ 10T
GG 562510
GG 562510
MJ VALVE, ASSY IND MJ 10T
Graco 562510 Trabon® MJ Series-Flo Divider Valve with Right Hand Cycle Pin - MJ-10T - 0.010 in³ (0.16 cm³)
The Trabon MJ series features a compact and easily customizable design that can be tailor fit to meet a variety of specific lube requirements. Capable of handling grease grades up to NLGI #1.
Application: Compact and customizable divider block series for machine tool, product or press equipment.- Space efficient–from 6 to 16 points from one block assembly
- Built-in outlet check valves ensure accurate lube delivery, every time
- Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
- Lubriquip part number 001-010-602
- Model: Trabon
- Series: MJ
- Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery
- Compatible Material: Oil, Grease
- Cycle Indicator: Cycle Indicator
- Discharge Per Piston Stroke (in³): 0.010
- Divider Valve Series: MJ
- Material: Carbon Steel
- Maximum Cycle Rate (cycles/min): 60
- Maximum NLGI Grade: #1
- Maximum Operating Temperature (°C): 93
- Maximum Operating Temperature (°F): 200
- Maximum Working Pressure (bar): 138
- Maximum Working Pressure (kPa): 13800
- Maximum Working Pressure (psi): 2000
- Minimum Working Pressure (psi): 200
- Number of Outlets: 2
- Outlet Size (cm): 0.3175
- Outlet Size (in): 1/8
- Outlet Size (mm): 3.175
- Outlet Thread Gender: Female
- Outlet Thread Type: NPSF
$306.00
MJ VALVE, ASSY IND MJ 15T
GG 562511
GG 562511
MJ VALVE, ASSY IND MJ 15T
Graco 562511 Trabon® MJ Series-Flo Divider Valve with Right Hand Cycle Pin - MJ-15T - 0.015 in³ (0.246 cm³)
The Trabon MJ series features a compact and easily customizable design that can be tailor fit to meet a variety of specific lube requirements. Capable of handling grease grades up to NLGI #1.
Application: Compact and customizable divider block series for machine tool, product or press equipment.- Space efficient–from 6 to 16 points from one block assembly
- Built-in outlet check valves ensure accurate lube delivery, every time
- Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
- Lubriquip part number 001-015-602
- Model: Trabon
- Series: MJ
- Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery
- Compatible Material: Oil, Grease
- Cycle Indicator: Cycle Indicator
- Discharge Per Piston Stroke (in³): 0.015
- Divider Valve Series: MJ
- Material: Carbon Steel
- Maximum Cycle Rate (cycles/min): 60
- Maximum NLGI Grade: #1
- Maximum Operating Temperature (°C): 93
- Maximum Operating Temperature (°F): 200
- Maximum Working Pressure (bar): 138
- Maximum Working Pressure (kPa): 13800
- Maximum Working Pressure (psi): 2000
- Minimum Working Pressure (psi): 200
- Number of Outlets: 2
- Outlet Size (cm): 0.3175
- Outlet Size (in): 1/8
- Outlet Size (mm): 3.175
- Outlet Thread Gender: Female
- Outlet Thread Type: NPSF
$292.50
MX VALVE, ASSY 050S
GG 562516
GG 562516
MX VALVE, ASSY 050S
Graco 562516 Trabon® MX Divider Valve - MX-50S - 0.100 in³ (1.64 cm³)
Greater output volumes for heavy service requirements make the Trabon MX Series ideal for steel and paper mill systems with its economical and compact design.
- Lubricates large bearings
- Delivers up to 0.3 cubic inches (4.92 cubic centimeters) per cycle and has a wide range of accessories to monitor critical lubrication points
- Durable design withstands harsh environments and operating conditions
- Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event
- Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
- Lubriquip part number 004-050-001
- Model: Trabon
- Series: MX
- Application: In-Plant Machinery
- Compatible Material: Oil, Grease
- Cycle Indicator: None
- Discharge Per Piston Stroke (in³): 0.100
- Divider Valve Series: MX
- Material: Carbon Steel
- Maximum Cycle Rate (cycles/min): 200
- Maximum NLGI Grade: #2
- Maximum Operating Temperature (°C): 93
- Maximum Operating Temperature (°F): 200
- Maximum Working Pressure (bar): 207
- Maximum Working Pressure (kPa): 20700
- Maximum Working Pressure (psi): 3000
- Minimum Working Pressure (psi): 200
- Number of Outlets: 1
- Outlet Size (cm): 0.635
- Outlet Size (in): 1/4
- Outlet Size (mm): 6.35
- Outlet Thread Gender: Female
- Outlet Thread Type: NPSF
$485.00
MX VALVE, ASSY 050T
GG 562517
GG 562517
MX VALVE, ASSY 050T
Graco 562517 Trabon® MX Divider Valve - MX-50T - 0.050 in³ (0.82 cm³)
Greater output volumes for heavy service requirements make the Trabon MX Series ideal for steel and paper mill systems with its economical and compact design.
- Lubricates large bearings
- Delivers up to 0.3 cubic inches (4.92 cubic centimeters) per cycle and has a wide range of accessories to monitor critical lubrication points
- Durable design withstands harsh environments and operating conditions
- Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event
- Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
- Lubriquip part number 004-050-002
- Model: Trabon
- Series: MX
- Application: In-Plant Machinery
- Compatible Material: Oil, Grease
- Cycle Indicator: None
- Discharge Per Piston Stroke (in³): 0.050
- Divider Valve Series: MX
- Material: Carbon Steel
- Maximum Cycle Rate (cycles/min): 200
- Maximum NLGI Grade: #2
- Maximum Operating Temperature (°C): 93
- Maximum Operating Temperature (°F): 200
- Maximum Working Pressure (bar): 207
- Maximum Working Pressure (kPa): 20700
- Maximum Working Pressure (psi): 3000
- Minimum Working Pressure (psi): 200
- Number of Outlets: 2
- Outlet Size (cm): 0.635
- Outlet Size (in): 1/4
- Outlet Size (mm): 6.35
- Outlet Thread Gender: Female
- Outlet Thread Type: NPSF
$485.00
MX VALVE, ASSY 125S IND RH
GG 562521
GG 562521
MX VALVE, ASSY 125S IND RH
Trabon® MX Divider Valve with Right Hand Cycle Pin Indicator - MX-125S - 0.250 in³ (4.10 cm³)Greater output volumes for heavy service requirements make the Trabon MX Series ideal for steel and paper mill systems with its economical and compact design.
Lubricates large bearings Delivers up to 0.3 cubic inches (4.92 cubic centimeters) per cycle and has a wide range of accessories to monitor critical lubrication points Durable design withstands harsh environments and operating conditions Built-in outlet check valves ensure accurate lube delivery every time Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Lubriquip part number 004-125-601
$608.00
MX VALVE, ASSY 100S
GG 562540
GG 562540
MX VALVE, ASSY 100S
Trabon® MX Divider Valve - MX-100S - 0.200 in³ (3.28 cm³)Greater output volumes for heavy service requirements make the Trabon MX Series ideal for steel and paper mill systems with its economical and compact design.
Lubricates large bearings Delivers up to 0.3 cubic inches (4.92 cubic centimeters) per cycle and has a wide range of accessories to monitor critical lubrication points Durable design withstands harsh environments and operating conditions Built-in outlet check valves ensure accurate lube delivery every time Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Lubriquip part number 004-100-001
$485.00
MGO VALVE, ASSY MGO 600S SAE
GG 562573
GG 562573
MGO VALVE, ASSY MGO 600S SAE
Trabon® MGO Modular Divider Valve - MGO-600S - 1.200 in³ (19.7 cm³)While critical bearings are hard at work on your largest machine tools, Graco's line of centralized and automatic lubrication systems is delivering precise amounts of lubricant at frequent intervals to every lube point–even in hard to reach areas.
Lubricates large bearings Delivers up to 1.2 cubic inches (19.7 cubic centimeters) per cycle and has a wide range of accessories to monitor critical lubrication points Largest output available with 22 outlets and 11 working sections SAE porting for a sealed outlet to ensure leak-free life TFE standard seals allow for maximum fluid compatibility and high temperature use Lubriquip part number 007-600-031
$1,845.00
Trabon MD Mono Block Divider Valve, MD-3
GG 562657
GG 562657
Trabon MD Mono Block Divider Valve, MD-3
$345.00
MHH VALVE, ASSY 18S
GG 562682
GG 562682
MHH VALVE, ASSY 18S
Manzel® MHH Modular Divider Valve .018 SingleSame capable design as the Trabon MSP Series, with even tighter and more exacting tolerances.
The Manzel MHH Series delivers highly accurate lube delivery for demanding high pressure grease and oil applications. Quick change valve sections can be removed from the base assembly without disturbing any lube lines–minimizing labor cost and maximizing your machine uptime Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-000-495
$108.50
MSP VALVE, ASSY MSP 25T
GG 562724
GG 562724
MSP VALVE, ASSY MSP 25T
Trabon® MSP Modular Divider Valve - MSP-25T - 0.025 in³ (0.41 cm³)The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-215
$58.00
MSP VALVE, ASSY MSP 20T
GG 562723
GG 562723
MSP VALVE, ASSY MSP 20T
Trabon® MSP Modular Divider Valve - MSP-20T - 0.020 in³ (0.33 cm³)The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-205
$58.00
MHH VALVE, ASSY 06S
GG 562679
GG 562679
MHH VALVE, ASSY 06S
Manzel® MHH Modular Divider Valve .006 SingleSame capable design as the Trabon MSP Series, with even tighter and more exacting tolerances.
The Manzel MHH Series delivers highly accurate lube delivery for demanding high pressure grease and oil applications. Quick change valve sections can be removed from the base assembly without disturbing any lube lines–minimizing labor cost and maximizing your machine uptime Can be easily accessorized with magnetic and electronic proximity switch .cycle indicators to provide positive assurance of a successful lube event Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-000-465
$105.50
MSP VALVE, ASSY MSP 40S
GG 562718
GG 562718
MSP VALVE, ASSY MSP 40S
Trabon® MSP Modular Divider Valve - MSP-40S - 0.080 in³ (1.31 cm³)The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-085
$58.00
MSP VALVE, ASSY MSP 35T
GG 562726
GG 562726
MSP VALVE, ASSY MSP 35T
Graco 562726 Trabon® MSP Modular Divider Valve - MSP-35T - 0.035 in³ (0.57 cm³)
The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
- Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime
- Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event.
- Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
- Lubriquip part number 106-100-235
- Model: Trabon
- Series: MSP
- Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery
- Compatible Material: Oil, Grease
- Cycle Indicator: None
- Discharge Per Piston Stroke (in³): 0.035
- Divider Valve Series: MSP
- Material: Carbon Steel
- Maximum Cycle Rate (cycles/min): 200
- Maximum NLGI Grade: #2
- Maximum Operating Temperature (°C): 176
- Maximum Operating Temperature (°F): 350
- Maximum Working Pressure (bar): 241
- Maximum Working Pressure (kPa): 24100
- Maximum Working Pressure (psi): 3500
- Minimum Working Pressure (bar): 14
- Minimum Working Pressure (psi): 200
- Number of Outlets: 2
$58.00
MSP VALVE, ASSY MSP 30T
GG 562725
GG 562725
MSP VALVE, ASSY MSP 30T
Trabon® MSP Modular Divider Valve - MSP-30T - 0.030 in³ (0.49 cm³)The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-225
$58.00
MSP VALVE, ASSY MSP 15S
GG 562713
GG 562713
MSP VALVE, ASSY MSP 15S
Trabon® MSP Modular Divider Valve - MSP-15S - 0.030 in³ (0.49 cm³)The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-035
$58.00
MHH VALVE, ASSY 09S
GG 562680
GG 562680
MHH VALVE, ASSY 09S
Graco 562680 Manzel® MHH Modular Divider Valve .009 Single
Same capable design as the Trabon MSP Series, with even tighter and more exacting tolerances.
Application: The Manzel MHH Series delivers highly accurate lube delivery for demanding high pressure grease and oil applications.- Quick change valve sections can be removed from the base assembly without disturbing any lube lines–minimizing labor cost and maximizing your machine uptime
- Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event
- Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
- Lubriquip part number 106-000-475
- Model: Manzel
- Series: MHH
- Application: In-Plant Machinery, Compressor Equipment
- Compatible Material: Oil, Grease
- Cycle Indicator: Cycle Pin
- Discharge Per Piston Stroke (in³): 0.009
- Divider Valve Series: MHH
- Inlet Size (in): 1/4 - 18, 7/16 - 20
- Inlet Thread Gender: Female
- Inlet Thread Type: NPS, SAE
- Material: Steel
- Maximum NLGI Grade: #2
- Maximum Working Pressure (bar): 517
- Maximum Working Pressure (kPa): 51700
- Maximum Working Pressure (psi): 7500
- Number of Outlets: 1
- Outlet Size (in): 1/8 - 27, 7/16 - 20
- Outlet Thread Gender: Female
- Outlet Thread Type: NPS, SAE
$108.50
MSP VALVE, ASSY MSP 30S
GG 562716
GG 562716
MSP VALVE, ASSY MSP 30S
Trabon® MSP Modular Divider Valve - MSP-30S - 0.060 in³ (0.98 cm³)The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-065
$58.00
MSP VALVE, ASSY MSP 05S
GG 562711
GG 562711
MSP VALVE, ASSY MSP 05S
Graco 562711 Trabon® MSP Modular Divider Valve - MSP-05S - 0.010 in³ (0.16 cm³)
The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
- Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime
- Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event.
- Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
- Lubriquip part number 106-100-015
- Model: Trabon
- Series: MSP
- Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery
- Compatible Material: Oil, Grease
- Cycle Indicator: None
- Discharge Per Piston Stroke (in³): 0.010
- Divider Valve Series: MSP
- Material: Carbon Steel
- Maximum Cycle Rate (cycles/min): 200
- Maximum NLGI Grade: #2
- Maximum Operating Temperature (°C): 176
- Maximum Operating Temperature (°F): 350
- Maximum Working Pressure (bar): 241
- Maximum Working Pressure (kPa): 24100
- Maximum Working Pressure (psi): 3500
- Minimum Working Pressure (bar): 14
- Minimum Working Pressure (psi): 200
- Number of Outlets: 1
$58.00
MSP VALVE, ASSY MSP 35S
GG 562717
GG 562717
MSP VALVE, ASSY MSP 35S
Trabon® MSP Modular Divider Valve - MSP-35S - 0.070 in³ (1.15 cm³)The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-075
$58.00
MHH VALVE, ASSY 12S
GG 562681
GG 562681
MHH VALVE, ASSY 12S
Graco 562681 Manzel® MHH Modular Divider Valve .012 Single
Same capable design as the Trabon MSP Series, with even tighter and more exacting tolerances.
Application: The Manzel MHH Series delivers highly accurate lube delivery for demanding high pressure grease and oil applications.- Quick change valve sections can be removed from the base assembly without disturbing any lube lines–minimizing labor cost and maximizing your machine uptime
- Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event
- Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
- Lubriquip part number 106-000-485
- Model: Manzel
- Series: MHH
- Application: In-Plant Machinery, Compressor Equipment
- Compatible Material: Oil, Grease
- Cycle Indicator: Cycle Pin
- Discharge Per Piston Stroke (in³): 0.012
- Divider Valve Series: MHH
- Inlet Size (in): 1/4 - 18, 7/16 - 20
- Inlet Thread Gender: Female
- Inlet Thread Type: NPS, SAE
- Material: Steel
- Maximum NLGI Grade: #2
- Maximum Working Pressure (bar): 517
- Maximum Working Pressure (kPa): 51700
- Maximum Working Pressure (psi): 7500
- Number of Outlets: 1
- Outlet Size (in): 1/8 - 27, 7/16 - 20
- Outlet Thread Gender: Female
- Outlet Thread Type: NPS, SAE
$108.50
MSP VALVE, ASSY MSP 10T
GG 562721
GG 562721
MSP VALVE, ASSY MSP 10T
Trabon® MSP Modular Divider Valve - MSP-10T - 0.010 in³ (0.16 cm³)The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-185
$58.00
MSP VALVE, ASSY MSP 40T
GG 562727
GG 562727
MSP VALVE, ASSY MSP 40T
Trabon® MSP Modular Divider Valve - MSP-40T - 0.040 in³ (0.66 cm³)The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-245
$58.00
MSP VALVE, ASSY IND MSP 30S
GG 562731
GG 562731
MSP VALVE, ASSY IND MSP 30S
Graco 562731 Trabon® MSP Modular Divider Valve with Right Cycle Pin - MSP-30S - 0.060 in³ (0.98 cm³)
The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
- Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime
- Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event.
- Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
- Lubriquip part number 106-100-755
- Model: Trabon
- Series: MSP
- Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery
- Compatible Material: Oil, Grease
- Cycle Indicator: Cycle Indicator
- Discharge Per Piston Stroke (in³): 0.060
- Divider Valve Series: MSP
- Material: Carbon Steel
- Maximum Cycle Rate (cycles/min): 60
- Maximum NLGI Grade: #2
- Maximum Operating Temperature (°C): 176
- Maximum Operating Temperature (°F): 350
- Maximum Working Pressure (bar): 241
- Maximum Working Pressure (kPa): 24100
- Maximum Working Pressure (psi): 3500
- Minimum Working Pressure (bar): 14
- Minimum Working Pressure (psi): 200
- Number of Outlets: 1
$137.00
MSP VALVE, ASSY IND MSP 20S
GG 562729
GG 562729
MSP VALVE, ASSY IND MSP 20S
Graco 562729 Trabon® MSP Modular Divider Valve with Right Cycle Pin - MSP-20S - 0.040 in³ (0.66 cm³)
The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
- Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime
- Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event.
- Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
- Lubriquip part number 106-100-735
- Model: Trabon
- Series: MSP
- Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery
- Compatible Material: Oil, Grease
- Cycle Indicator: Cycle Indicator
- Discharge Per Piston Stroke (in³): 0.040
- Divider Valve Series: MSP
- Material: Carbon Steel
- Maximum Cycle Rate (cycles/min): 60
- Maximum NLGI Grade: #2
- Maximum Operating Temperature (°C): 176
- Maximum Operating Temperature (°F): 350
- Maximum Working Pressure (bar): 241
- Maximum Working Pressure (kPa): 24100
- Maximum Working Pressure (psi): 3500
- Minimum Working Pressure (bar): 14
- Minimum Working Pressure (psi): 200
- Number of Outlets: 1
$137.00
MSP VALVE, ASSY IND MSP 20T
GG 562739
GG 562739
MSP VALVE, ASSY IND MSP 20T
Trabon® MSP Modular Divider Valve with Right Cycle Pin - MSP-20T - 0.020 in³ (0.33 cm³)The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-935
$137.00
MSP VALVE, ASSY MSP 25S
GG 562715
GG 562715
MSP VALVE, ASSY MSP 25S
Trabon® MSP Modular Divider Valve - MSP-25S - 0.050 in³ (0.82 cm³)The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-055
$58.00
MD VALVE, FEEDER, 4
GG 562658
GG 562658
MD VALVE, FEEDER, 4
Trabon® MD Mono Block Divider Valve - MD-4The Trabon MD Series is the most compact series progressive solution making it a perfect fit for tight spaced applications
4 outlets Easy to install on new or existing equipment Use our cycle indicator pin models to provide positive assurance of a successful lube event Fluoroelastomer seals for high temperature applications or synthetic lubricants Lubriquip part number 103-000-151
$361.00
MXP VALVE, TWIN 100T
GG 562816
GG 562816
MXP VALVE, TWIN 100T
Trabon® MXP Modular Divider Valve - MXP-100T - 0.100 in³ (1.64 cm³)The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.
Ideal for heavy-duty and large bearing applications with wide temperature variations and high volume requirements. Quick change valve sections can be removed from the base assembly without disturbing any lube lines–minimizing labor cost and maximizing your machine uptime Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Robust design is virtually indestructible and built to perform in extreme environments Lubriquip part number 106-300-040
$237.00
MHH VALVE, ASSY 12T
GG 562687
GG 562687
MHH VALVE, ASSY 12T
Graco 562687 Manzel® MHH Modular Divider Valve .012 Twin
Same capable design as the Trabon MSP Series, with even tighter and more exacting tolerances.
Application: The Manzel MHH Series delivers highly accurate lube delivery for demanding high pressure grease and oil applications.- Quick change valve sections can be removed from the base assembly without disturbing any lube lines–minimizing labor cost and maximizing your machine uptime
- Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event
- Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
- Lubriquip part number 106-000-615
- Model: Manzel
- Series: MHH
- Application: In-Plant Machinery, Compressor Equipment
- Compatible Material: Oil, Grease
- Cycle Indicator: Cycle Pin
- Discharge Per Piston Stroke (in³): 0.012
- Divider Valve Series: MHH
- Inlet Size (in): 1/4 - 18, 7/16 - 20
- Inlet Thread Gender: Female
- Inlet Thread Type: NPS, SAE
- Material: Steel
- Maximum NLGI Grade: #2
- Maximum Working Pressure (bar): 517
- Maximum Working Pressure (kPa): 51700
- Maximum Working Pressure (psi): 7500
- Number of Outlets: 2
- Outlet Size (in): 1/8 - 27, 7/16 - 20
- Outlet Thread Gender: Female
- Outlet Thread Type: NPS, SAE
$108.50
MSP VALVE, ASSY IND MSP 40T
GG 562743
GG 562743
MSP VALVE, ASSY IND MSP 40T
Graco 562743 Trabon® MSP Modular Divider Valve with Right Cycle Pin - MSP-40T - 0.040 in³ (0.66 cm³)
The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
- Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime
- Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event.
- Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
- Lubriquip part number 106-100-975
- Model: Trabon
- Series: MSP
- Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery
- Compatible Material: Oil, Grease
- Cycle Indicator: Cycle Indicator
- Discharge Per Piston Stroke (in³): 0.040
- Divider Valve Series: MSP
- Material: Carbon Steel
- Maximum Cycle Rate (cycles/min): 60
- Maximum NLGI Grade: #2
- Maximum Operating Temperature (°C): 176
- Maximum Operating Temperature (°F): 350
- Maximum Working Pressure (bar): 241
- Maximum Working Pressure (kPa): 24100
- Maximum Working Pressure (psi): 3500
- Minimum Working Pressure (bar): 14
- Minimum Working Pressure (psi): 200
- Number of Outlets: 2
$137.00
MSP VALVE, ASSY MSP 15T
GG 562722
GG 562722
MSP VALVE, ASSY MSP 15T
Graco 562722 Trabon® MSP Modular Divider Valve - MSP-15T - 0.015 in³ (0.26 cm³)
The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
- Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime
- Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event.
- Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
- Lubriquip part number 106-100-195
- Model: Trabon
- Series: MSP
- Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery
- Compatible Material: Oil, Grease
- Cycle Indicator: None
- Discharge Per Piston Stroke (in³): 0.015
- Divider Valve Series: MSP
- Material: Carbon Steel
- Maximum Cycle Rate (cycles/min): 200
- Maximum NLGI Grade: #2
- Maximum Operating Temperature (°C): 176
- Maximum Operating Temperature (°F): 350
- Maximum Working Pressure (bar): 241
- Maximum Working Pressure (kPa): 24100
- Maximum Working Pressure (psi): 3500
- Minimum Working Pressure (bar): 14
- Minimum Working Pressure (psi): 200
- Number of Outlets: 2
$58.00
MSP VALVE, ASSY MSP 05T
GG 562720
GG 562720
MSP VALVE, ASSY MSP 05T
Trabon® MSP Modular Divider Valve - MSP-05T - 0.005 in³ (0.08 cm³)The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-175
$58.00
MXP VALVE, SINGLE 50S
GG 562820
GG 562820
MXP VALVE, SINGLE 50S
Trabon® MXP Modular Divider Valve - MXP-50S - 0.100 in³ (1.64 cm³)The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.
Ideal for heavy-duty and large bearing applications with wide temperature variations and high volume requirements. Quick change valve sections can be removed from the base assembly without disturbing any lube lines–minimizing labor cost and maximizing your machine uptime Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Robust design is virtually indestructible and built to perform in extreme environments Lubriquip part number 106-300-080
$237.00
MXP VALVE, SINGLE 100S
GG 562822
GG 562822
MXP VALVE, SINGLE 100S
Trabon® MXP Modular Divider Valve - MXP-100S - 0.200 in³ (3.28 cm³)The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.
Ideal for heavy-duty and large bearing applications with wide temperature variations and high volume requirements. Quick change valve sections can be removed from the base assembly without disturbing any lube lines–minimizing labor cost and maximizing your machine uptime Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Robust design is virtually indestructible and built to perform in extreme environments Lubriquip part number 106-300-100
$237.00
MXP VALVE, SINGLE 150S
GG 562824
GG 562824
MXP VALVE, SINGLE 150S
Trabon® MXP Modular Divider Valve - MXP-150S - 0.300 in³ (4.92 cm³)The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.
Ideal for heavy-duty and large bearing applications with wide temperature variations and high volume requirements. Quick change valve sections can be removed from the base assembly without disturbing any lube lines–minimizing labor cost and maximizing your machine uptime Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Robust design is virtually indestructible and built to perform in extreme environments Lubriquip part number 106-300-120
$237.00
MXP VALVE, SINGLE 150S W/IND
GG 562834
GG 562834
MXP VALVE, SINGLE 150S W/IND
Trabon® MXP Modular Divider Valve with Indicator - MXP-150S - 0.300 in³ (4.92 cm³)The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.
Ideal for heavy-duty and large bearing applications with wide temperature variations and high volume requirements. Quick change valve sections can be removed from the base assembly without disturbing any lube lines–minimizing labor cost and maximizing your machine uptime Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Robust design is virtually indestructible and built to perform in extreme environments Lubriquip part number 106-300-220
$354.00
TIMER, SOLID STATE
GG 562872
GG 562872
TIMER, SOLID STATE
LubriSystem Solid State Timer - 115 VAC For use with LubriSystem® Pneumatic Pumps. Solid State Timer, 115 VAC Lubriquip part number 163-400-000
$652.00
RESERVOIR, 12LB PLSTC GRS GPS
GG 562884
GG 562884
RESERVOIR, 12LB PLSTC GRS GPS
12 lb. (5.42 kg) Plastic Cylindrical Grease Reservoir For use with Modu-Flo and E-Series Pumps. 12 lb (5.42 kg) Plastic Cylindrical Reservoir Lubriquip part number 185-100-000
$884.00
5 Lb Plastic Cylindrical Grease Resevoir
GG 562888
GG 562888
5 Lb Plastic Cylindrical Grease Resevoir
$955.00
5 pt. (2.36 liter) Plastic Cylindrical Oil Reservoir
GG 562891
GG 562891
5 pt. (2.36 liter) Plastic Cylindrical Oil Reservoir
$907.00
RESERVOIR, PLSTC GRS LUBEMASTER 20L
GG 562897
GG 562897
RESERVOIR, PLSTC GRS LUBEMASTER 20L
Graco 562897 20 lb. Plastic Grease Reservoir
Application: For use with LubriSystem and Lube Master Pumps.
- 20 lb (9.06 kg) Reservoir
- Lubriquip part number 185-100-550
- Compatible Material: Grease
- Material: Plastic
$726.00
TUBE, RESV REPLACE 20LB PLSTC
GG 562903
GG 562903
TUBE, RESV REPLACE 20LB PLSTC
Graco 562903 Modu-Flo and E-Pump Spare Parts and Accessories - 20 pt./lb. Plastic Replacement Reservoir Assembly, 6 in OD x 20 in long
- Reservoir Repair Kits - Plastic tube with u-cup seal for part numbers 562893 and 562897
- Lubriquip part number 185-100-740
- Compatible Material: Oil, Grease
- Includes: Reservoir
- Material: Plastic
$505.00
MODEL 25 LUBRICATOR
GG 562920
GG 562920
MODEL 25 LUBRICATOR
Graco 562920 Manzel® Model 25 Lubricator
Manzel Model 25 Force Feed Lubricators are economical, general purpose units of double plunger design for precise metering of lubricants (either mineral oil base or synthetics). All working parts are totally enclosed—away from dust, water and impurities—and self-lubricated at all times by the lubricant in the reservoir.
Application: They provide lubrication to cylinder walls, bearings and other moving parts of equipment such as sugar mills, steam engines, presses and general machinery.- General-Purpose Lubrication: automatic, precision metering for all types of machinery.
- Pressures: Up to 1000 psi (69 bar)
- Type Pumping Unit: Clear-Vue. Sight Feed Chamber functions at atmospheric pressure. Shows amount of lubricant being pumped.
- Unitized Construction: Contains complete feed regulating mechanism. Equipped with inlet strainer.
- Displacement, Output: 1/4 to 12 drops per stroke with 5/16 in plunger, 1/6 to 6 drops per stroke with 3/16 in plunger.
- Reservoirs: Single Compartment, sheet metal construction.
- Feed Regulator: External screw-type precisely adjustable while idle or in operation.
- Lubriquip part number 225-001-970
- Model: Manzel
- Series: Model 25
- Compatible Material: Oil
$6,100.00
FILTER, CANISTER 10
GG 563093
GG 563093
FILTER, CANISTER 10
Graco 563093 Replacement Element for Spin-On Oil Filters - 10 Micron
Application: For use with Spin-On Oil Filters.
- 10 micron Replacement Filter Element for assemblies 563092, 563095, 564343
- Lubriquip part number 473-000-262
- For Use With: Meter-Flo Pump Packages, Spin-On Oil Filters
$52.50
MSP VALVE, ASSY MSP 20S
GG 562714
GG 562714
MSP VALVE, ASSY MSP 20S
Trabon® MSP Modular Divider Valve - MSP-20S - 0.040 in³ (0.66 cm³)The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-045
$58.00
FILTER, INLET RESTRICTOR, NPTF
GG 563074
GG 563074
FILTER, INLET RESTRICTOR, NPTF
Graco 563074 MSP Standard Zero Leak Inlet 90 micron Oil Filter/Restrictor, NPT
Application: For use with Inlet and In-Line Oil Filters.
- MSP Standard Zero Leak Inlet 90 micron Oil Filter/Restrictor, NPT
- Lubriquip part number 463-410-204
$73.75
FILTER, 10 MICRON
GG 563095
GG 563095
FILTER, 10 MICRON
Graco 563095 Spin-On Oil Filter Assembly with External 150 psi Relief Valve - 200 psi, 3/4 in. NPT, 10 Micron
- 10 micron Spin-On Filter Assembly, NPT, External 150 psi (10.3 bar) Relief
- Lubriquip part number 473-000-271
- Maximum Working Pressure (bar): 14
- Maximum Working Pressure (kPa): 1400
- Maximum Working Pressure (MPa): 140
- Maximum Working Pressure (psi): 200
- Port Size (cm): 1.905
- Port Size (in): 3/4
- Port Size (mm): 19.05
$149.00
VALVE, RELIEF, 1/4 NPT, 750 PSI
GG 563156
GG 563156
VALVE, RELIEF, 1/4 NPT, 750 PSI
Graco 563156 Automatic Relief Indicator for MX Divider Valves, 750 psi (52 bar)
Keep your machine running while lubrication gets to critical points. These performance indicators pinpoint lube line blockages but allow the lube system to continue to supply lubrication to points that are not blocked.
- No time or effort required for reset after blockage is cleared
- Easy information on blocked lines, high system pressure or blocked bearings
- Works with MSP, MX, MXP, MJ and MHH divider valves
- Model: Trabon
- Application: In-Plant Machinery, Off-Road Equipment, Compressor Equipment
- Compatible Material: Oil, Grease
- Connection Size (in): 0.25
- Indicator Type: Automatic Relief Indicators
- Maximum Working Pressure (bar): 51
- Maximum Working Pressure (kPa): 5100
- Maximum Working Pressure (MPa): 5
- Maximum Working Pressure (psi): 750
- Overall Length (cm): 3
- Overall Length (in): 1.37
- Overall Length (mm): 35
$30.20
MSP VALVE, ASSY MSP 10S
GG 562712
GG 562712
MSP VALVE, ASSY MSP 10S
Trabon® MSP Modular Divider Valve - MSP-10S - 0.020 in³ (0.33 cm³)The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-025
$58.00
SWIVEL, 90 1/8 PORT NITRILE
GG 563148
GG 563148
SWIVEL, 90 1/8 PORT NITRILE
Compact 90º Angle Swivel - 1/8 inch, NitrileThe Trabon Straight and Angle Swivels are available in standard ball bearing or compact types. Primarily designed for medium to high pressure service in centralized oil and grease systems, these swivels provide a simple and inexpensive means of making line connections between either stationary, or oscillating surfaces.
90º Swivel Adapter - 1/8 inch (3.2 mm) NPT x 1/8 inch (3.2 mm) NPT Female Lubriquip part number 501-257-000 Trabon part number 1257
$37.50
VALVE, RELIEF, 1/4 NPT, 3000 PSI
GG 563161
GG 563161
VALVE, RELIEF, 1/4 NPT, 3000 PSI
Graco 563161 Automatic Relief Indicator for MX Divider Valves, 3000 psi (207 bar)
Keep your machine running while lubrication gets to critical points. These performance indicators pinpoint lube line blockages but allow the lube system to continue to supply lubrication to points that are not blocked.
- No time or effort required for reset after blockage is cleared
- Easy information on blocked lines, high system pressure or blocked bearings
- Works with MSP, MX, MXP, MJ and MHH divider valves
- Model: Trabon
- Application: In-Plant Machinery, Off-Road Equipment, Compressor Equipment
- Compatible Material: Oil, Grease
- Connection Size (in): 0.25
- Indicator Type: Automatic Relief Indicators
- Maximum Working Pressure (bar): 207
- Maximum Working Pressure (kPa): 20700
- Maximum Working Pressure (MPa): 21
- Maximum Working Pressure (psi): 3000
- Overall Length (cm): 3
- Overall Length (in): 1.37
- Overall Length (mm): 35
$30.20
VALVE, RELIEF, 1/4 NPT, 2500 PSI
GG 563160
GG 563160
VALVE, RELIEF, 1/4 NPT, 2500 PSI
Graco 563160 Automatic Relief Indicator for MX Divider Valves, 2500 psi (172 bar)
Keep your machine running while lubrication gets to critical points. These performance indicators pinpoint lube line blockages but allow the lube system to continue to supply lubrication to points that are not blocked.
- No time or effort required for reset after blockage is cleared
- Easy information on blocked lines, high system pressure or blocked bearings
- Works with MSP, MX, MXP, MJ and MHH divider valves
- Model: Trabon
- Application: In-Plant Machinery, Off-Road Equipment, Compressor Equipment
- Compatible Material: Oil, Grease
- Connection Size (in): 0.25
- Indicator Type: Automatic Relief Indicators
- Maximum Working Pressure (bar): 172
- Maximum Working Pressure (kPa): 17200
- Maximum Working Pressure (MPa): 17
- Maximum Working Pressure (psi): 2500
- Overall Length (cm): 3
- Overall Length (in): 1.37
- Overall Length (mm): 35
$30.20
FITTING, BLOWOUT 1/4 NPTF 2350 PSI
GG 563184
GG 563184
FITTING, BLOWOUT 1/4 NPTF 2350 PSI
Graco 563184 Rupture-to-Atmosphere Indicators for MX Divider Valves - 2350 psi, 1/4 inch-18 inch NPT(f) - Grease
Application: Rupture-to-Atmosphere Indicators for use with MX Divider Valves.
- Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.
- Requires replacement of the rupture disc to restart the lube system.
- Easy information on blocked lines, high system pressure or blocked bearings.
- Trabon part number 9206-16
- Compatible Material: Grease
- Connection Size (in): 0.25
- Indicator Type: Rupture-to-Atmosphere Indicator
- Maximum Working Pressure (bar): 162
- Maximum Working Pressure (kPa): 16200
- Maximum Working Pressure (MPa): 16.2
- Maximum Working Pressure (psi): 2350
$38.50
BLOCK, SPINDL-GARD, .0030
GG 563131
GG 563131
BLOCK, SPINDL-GARD, .0030
High Speed Spindl-Gard (HSSG) Block - 0.0030 cu in displacement For use with Air Oil High Speed Spindl-Gard® Systems.0.0030 in3 displacement
Lubriquip part number 484-095-229
$517.00
FILTER, ASSY LUBE
GG 563091
GG 563091
FILTER, ASSY LUBE
In-Line Oil Filter - MSP Standard Inlet Filter, 3500 psi, 1/4-18 NPTF, 10 Micron; Lubriquip part number 473-000-234 For use with Trabon MSP divider valves. Installs into inlet port.MSP Standard Inlet 10 micron Oil Filter, NPT
Uses replacement filter element p/n 557134.
$383.00