GRACO INC. S10595

GRACO INC. S10595 branded products

View as Grid List

Sort by

RAC X LTX TIP, SPRAY, (225)

GG LTX225

RAC X LTX TIP, SPRAY, (225)

RAC X SwitchTip, 225 The Reverse-A-Clean (RAC) 225 RAC X SwitchTip is designed for narrower surfaces and thicker materials. The 225 SwitchTip has a 0.025 inch orifice and produces a 4 to 6 inch fan. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, (227)

GG LTX227

RAC X LTX TIP, SPRAY, (227)

RAC X SwitchTip, 227 The Reverse-A-Clean (RAC) 227 RAC X SwitchTip is designed for narrower surfaces and thicker materials. The 227 SwitchTip has a 0.027 inch orifice and produces a 4 to 6 inch fan. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, 311

GG LTX311

RAC X LTX TIP, SPRAY, 311

Graco LTX311 RAC X SwitchTip, 311

The Reverse-A-Clean (RAC) 311 RAC X SwitchTip is designed for narrow surfaces and thin materials. The 311 SwitchTip has a 0.011 inch orifice and produces a 6 to 8 inch fan. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Clear Coating, Lacquer, Oil-Based Stain
For Use With: RAC X HandTite Tip Guard
Material: Tungsten Carbide
Maximum Fan Width (cm): 15
Maximum Fan Width (in): 6
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Orifice Diameter (in): 0.011

$65.25

RAC X LTX TIP, SPRAY, 313

GG LTX313

RAC X LTX TIP, SPRAY, 313

RAC X SwitchTip, 313 The Reverse-A-Clean (RAC) 313 RAC X SwitchTip is designed for narrow surfaces. The 313 SwitchTip has a 0.013 inch orifice and produces a 6 to 8 inch fan. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

$LTXXXX_LTX_Tip_Main.jpg$

RAC X LTX TIP, SPRAY, 315

GG LTX315

RAC X LTX TIP, SPRAY, 315

RAC X SwitchTip, 315 The Reverse-A-Clean (RAC) 315 RAC X SwitchTip is designed for narrow surfaces. The 315 SwitchTip has a 0.015 inch orifice and produces a 6 to 8 inch fan. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, 317

GG LTX317

RAC X LTX TIP, SPRAY, 317

RAC X SwitchTip, 317 The Reverse-A-Clean (RAC) 317 RAC X SwitchTip is designed for narrow surfaces. The 317 SwitchTip has a 0.017 inch orifice and produces a 6 to 8 inch fan. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, 321

GG LTX321

RAC X LTX TIP, SPRAY, 321

RAC X SwitchTip, 321 The Reverse-A-Clean (RAC) 321 RAC X SwitchTip is designed for narrow surfaces and thick materials. The 321 SwitchTip has a 0.021 inch orifice and produces a 6 to 8 inch fan. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, 319

GG LTX319

RAC X LTX TIP, SPRAY, 319

Graco LTX319 RAC X SwitchTip, 319

The Reverse-A-Clean (RAC) 319 RAC X SwitchTip is designed for narrow surfaces and thick materials. The 319 SwitchTip has a 0.019 inch orifice and produces a 6 to 8 inch fan. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint
For Use With: RAC X HandTite Tip Guard
Maximum Fan Width (cm): 15
Maximum Fan Width (in): 6
Maximum Fan Width (mm): 203
Maximum Flow Rate (GPM): 0.38
Maximum Flow Rate (L/min): 1.44
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 6
Minimum Fan Width (mm): 152
Orifice Diameter (in): 0.019
Pattern Size (in): 6 to 8
Pattern Size (mm): 152.4 to 203.2

$65.25

RAC X LTX TIP, SPRAY, (323)

GG LTX323

RAC X LTX TIP, SPRAY, (323)

RAC X SwitchTip, 323 The Reverse-A-Clean (RAC) 323 RAC X SwitchTip is designed for narrow surfaces and thick materials. The 323 SwitchTip has a 0.023 inch orifice and produces a 6 to 8 inch fan. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, (329)

GG LTX329

RAC X LTX TIP, SPRAY, (329)

RAC X SwitchTip, 329 The Reverse-A-Clean (RAC) 329 RAC X SwitchTip is designed for narrow surfaces and thicker materials. The 329 SwitchTip has a 0.029 inch orifice and produces a 6 to 8 inch fan. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, (327)

GG LTX327

RAC X LTX TIP, SPRAY, (327)

Graco LTX327 RAC X SwitchTip, 327

The Reverse-A-Clean (RAC) 327 RAC X SwitchTip is designed for narrow surfaces and thicker materials. The 327 SwitchTip has a 0.027 inch orifice and produces a 6 to 8 inch fan. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint
For Use With: RAC X HandTite Tip Guard
Maximum Fan Width (cm): 15
Maximum Fan Width (in): 6
Maximum Fan Width (mm): 203
Maximum Flow Rate (GPM): 0.77
Maximum Flow Rate (L/min): 2.91
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 6
Minimum Fan Width (mm): 152
Orifice Diameter (in): 0.027
Pattern Size (in): 6 to 8
Pattern Size (mm): 152.4 to 203.2

$65.25

RAC X LTX TIP, SPRAY, (325)

GG LTX325

RAC X LTX TIP, SPRAY, (325)

RAC X SwitchTip, 325 The Reverse-A-Clean (RAC) 325 RAC X SwitchTip is designed for narrow surfaces and thicker materials. The 325 SwitchTip has a 0.025 inch orifice and produces a 6 to 8 inch fan. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, LATEX, (409)

GG LTX409

RAC X LTX TIP, SPRAY, LATEX, (409)

Graco LTX409 RAC X SwitchTip, 409

The Reverse-A-Clean (RAC) 409 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.009 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint
For Use With: RAC X HandTite Tip Guard
Maximum Fan Width (cm): 20
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254
Maximum Flow Rate (GPM): 0.09
Maximum Flow Rate (L/min): 0.34
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203
Orifice Diameter (in): 0.009
Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$65.25

RAC X LTX TIP, SPRAY, 415

GG LTX415

RAC X LTX TIP, SPRAY, 415

RAC X SwitchTip, 415 The Reverse-A-Clean (RAC) 415 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.015 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, 411

GG LTX411

RAC X LTX TIP, SPRAY, 411

Graco LTX411 RAC X SwitchTip, 411

The Reverse-A-Clean (RAC) 411 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.011 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

$65.25

RAC X LTX TIP, SPRAY, 413

GG LTX413

RAC X LTX TIP, SPRAY, 413

RAC X SwitchTip, 413 The Reverse-A-Clean (RAC) 413 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.013 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, 417

GG LTX417

RAC X LTX TIP, SPRAY, 417

Graco LTX417 RAC X SwitchTip, 417

The Reverse-A-Clean (RAC) 417 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.017 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

$65.25

RAC X LTX TIP, SPRAY, (425)

GG LTX425

RAC X LTX TIP, SPRAY, (425)

RAC X SwitchTip, 425 The Reverse-A-Clean (RAC) 425 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.025 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, 423

GG LTX423

RAC X LTX TIP, SPRAY, 423

RAC X SwitchTip, 423 The Reverse-A-Clean (RAC) 423 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.023 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, (427)

GG LTX427

RAC X LTX TIP, SPRAY, (427)

RAC X SwitchTip, 427 The Reverse-A-Clean (RAC) 427 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.027 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, 421

GG LTX421

RAC X LTX TIP, SPRAY, 421

RAC X SwitchTip, 421 The Reverse-A-Clean (RAC) 421 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.021 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, (431)

GG LTX431

RAC X LTX TIP, SPRAY, (431)

RAC X SwitchTip, 431 The Reverse-A-Clean (RAC) 431 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.031 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, 419

GG LTX419

RAC X LTX TIP, SPRAY, 419

Graco LTX419 RAC X SwitchTip, 419

The Reverse-A-Clean (RAC) 419 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.019 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint
For Use With: RAC X HandTite Tip Guard
Maximum Fan Width (cm): 20
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254
Maximum Flow Rate (GPM): 0.38
Maximum Flow Rate (L/min): 1.44
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203
Orifice Diameter (in): 0.019
Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$65.25

RAC X LTX TIP, SPRAY, LATEX, (429)

GG LTX429

RAC X LTX TIP, SPRAY, LATEX, (429)

RAC X SwitchTip, 429 The Reverse-A-Clean (RAC) 429 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.029 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, (433)

GG LTX433

RAC X LTX TIP, SPRAY, (433)

RAC X SwitchTip, 433 The Reverse-A-Clean (RAC) 433 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.033 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

$GG LTX545.jpg$

RAC X LTX TIP, SPRAY, (545)

GG LTX545

RAC X LTX TIP, SPRAY, (545)

RAC X SwitchTip, 545 The Reverse-A-Clean (RAC) 545 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.045 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

$GG LTX561.jpg$

RAC X LTX TIP, SPRAY, (561)

GG LTX561

RAC X LTX TIP, SPRAY, (561)

RAC X SwitchTip, 561 The Reverse-A-Clean (RAC) 561 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.061 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, 521

GG LTX521

RAC X LTX TIP, SPRAY, 521

RAC X SwitchTip, 521 The Reverse-A-Clean (RAC) 521 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.021 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, 615

GG LTX615

RAC X LTX TIP, SPRAY, 615

Graco LTX615 RAC X SwitchTip, 615

The Reverse-A-Clean (RAC) 615 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.015 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint
For Use With: RAC X HandTite Tip Guard
Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356
Maximum Flow Rate (GPM): 0.24
Maximum Flow Rate (L/min): 0.91
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305
Orifice Diameter (in): 0.015
Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$65.25

RAC X LTX TIP, SPRAY, (537)

GG LTX537

RAC X LTX TIP, SPRAY, (537)

RAC X SwitchTip, 537 The Reverse-A-Clean (RAC) 537 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.037 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

$GG LTX611.jpg$

RAC X LTX TIP, SPRAY, LATEX, (611)

GG LTX611

RAC X LTX TIP, SPRAY, LATEX, (611)

RAC X SwitchTip, 611 The Reverse-A-Clean (RAC) 611 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.011 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, LATEX, (613)

GG LTX613

RAC X LTX TIP, SPRAY, LATEX, (613)

RAC X SwitchTip, 613 The Reverse-A-Clean (RAC) 613 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.013 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, (539)

GG LTX539

RAC X LTX TIP, SPRAY, (539)

Graco LTX539 RAC X SwitchTip, 539

The Reverse-A-Clean (RAC) 539 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.039 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint
For Use With: RAC X HandTite Tip Guard
Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305
Maximum Flow Rate (GPM): 1.63
Maximum Flow Rate (L/min): 6.17
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254
Orifice Diameter (in): 0.039
Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

RAC X LTX TIP, SPRAY, 527

GG LTX527

RAC X LTX TIP, SPRAY, 527

RAC X SwitchTip, 527 The Reverse-A-Clean (RAC) 527 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.027 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, 535

GG LTX535

RAC X LTX TIP, SPRAY, 535

RAC X SwitchTip, 535 The Reverse-A-Clean (RAC) 535 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.035 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, 523

GG LTX523

RAC X LTX TIP, SPRAY, 523

Graco LTX523 RAC X SwitchTip, 523

The Reverse-A-Clean (RAC) 523 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.023 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint
For Use With: RAC X HandTite Tip Guard
Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305
Maximum Flow Rate (GPM): 0.57
Maximum Flow Rate (L/min): 2.16
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254
Orifice Diameter (in): 0.023
Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

RAC X LTX TIP, SPRAY, 531

GG LTX531

RAC X LTX TIP, SPRAY, 531

RAC X SwitchTip, 531 The Reverse-A-Clean (RAC) 531 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.031 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, LATEX, (435)

GG LTX435

RAC X LTX TIP, SPRAY, LATEX, (435)

Graco LTX435 RAC X SwitchTip, 435

The Reverse-A-Clean (RAC) 435 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.035 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint
For Use With: RAC X HandTite Tip Guard
Maximum Fan Width (cm): 20
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254
Maximum Flow Rate (GPM): 1.31
Maximum Flow Rate (L/min): 4.96
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203
Orifice Diameter (in): 0.035
Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$65.25

RAC X LTX TIP, SPRAY, 517

GG LTX517

RAC X LTX TIP, SPRAY, 517

Graco LTX517 RAC X SwitchTip, 517

The Reverse-A-Clean (RAC) 517 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.017 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
For Use With: RAC X HandTite Tip Guard
Material: Tungsten Carbide
Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254
Orifice Diameter (in): 0.017
Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

$GG LTX515.jpg$

RAC X LTX TIP, SPRAY, 515

GG LTX515

RAC X LTX TIP, SPRAY, 515

RAC X SwitchTip, 515 The Reverse-A-Clean (RAC) 515 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.015 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, 525

GG LTX525

RAC X LTX TIP, SPRAY, 525

Graco LTX525 RAC X SwitchTip, 525

The Reverse-A-Clean (RAC) 525 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.025 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint
For Use With: RAC X HandTite Tip Guard
Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305
Maximum Flow Rate (GPM): 0.67
Maximum Flow Rate (L/min): 2.54
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254
Orifice Diameter (in): 0.025
Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

$GG LTX509.jpg$

RAC X LTX TIP, SPRAY, LATEX, (509)

GG LTX509

RAC X LTX TIP, SPRAY, LATEX, (509)

RAC X SwitchTip, 509 The Reverse-A-Clean (RAC) 509 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.009 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, 519

GG LTX519

RAC X LTX TIP, SPRAY, 519

Graco LTX519 RAC X SwitchTip, 519

The Reverse-A-Clean (RAC) 519 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.019 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
For Use With: RAC X HandTite Tip Guard
Material: Tungsten Carbide
Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254
Orifice Diameter (in): 0.019
Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

$GG LTX541.jpg$

RAC X LTX TIP, SPRAY, (541)

GG LTX541

RAC X LTX TIP, SPRAY, (541)

Graco LTX541 RAC X SwitchTip, 541

The Reverse-A-Clean (RAC) 541 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.041 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint
For Use With: RAC X HandTite Tip Guard
Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305
Maximum Flow Rate (GPM): 1.80
Maximum Flow Rate (L/min): 6.81
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254
Orifice Diameter (in): 0.041
Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

RAC X LTX TIP, SPRAY, 511

GG LTX511

RAC X LTX TIP, SPRAY, 511

RAC X SwitchTip, 511 The Reverse-A-Clean (RAC) 511 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.011 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

RAC X LTX TIP, SPRAY, 513

GG LTX513

RAC X LTX TIP, SPRAY, 513

Graco LTX513 RAC X SwitchTip, 513

The Reverse-A-Clean (RAC) 513 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.013 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
For Use With: RAC X HandTite Tip Guard
Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254
Orifice Diameter (in): 0.013
Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

RAC X LTX TIP, SPRAY, 619

GG LTX619

RAC X LTX TIP, SPRAY, 619

Graco LTX619 RAC X SwitchTip, 619

The Reverse-A-Clean (RAC) 619 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.019 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
For Use With: RAC X HandTite Tip Guard
Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305
Orifice Diameter (in): 0.019
Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$65.25

RAC X LTX TIP, SPRAY, (551)

GG LTX551

RAC X LTX TIP, SPRAY, (551)

RAC X SwitchTip, 551 The Reverse-A-Clean (RAC) 551 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.051 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market

Longest lasting fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$65.25

Kit, Lower, 75Cc Assy

GG LW075A

KIT, LOWER,75CC ASSY

Graco LW075A Merkur Wet-Cup Style Stainless Steel Displacement Pump, 75 cc, Chromex coated rod and 3 UHMWPE, 2 PTFE packings

$2,730.00

Kit, Lower, 100Cc Assy

GG LW100A

KIT, LOWER,100CC ASSY

Graco LW100A Merkur Wet-Cup Style Stainless Steel Displacement Pump, 100 cc, Chromex coated rod and 3 UHMWPE, 2 PTFE packings

$2,970.00

Kit, Lower, 125Cc Assy

GG LW125A

KIT, LOWER,125CC ASSY

Graco LW125A Merkur Wet-Cup Style Stainless Steel Displacement Pump, 125 cc, Chromex coated rod and 3 UHMWPE, 2 PTFE packings

$3,420.00

Seat, Hex Oring

GG M0450

Seat, Hex Oring

$350.00

Locknut

GG M0454-2

Locknut

$180.00

Nozzle, Body, Ballnose, .078, XSH

GG M0663001

Nozzle, Body, Ballnose, .078, XSH

$2,250.00

Jacket, Water, Super Short

GG M0663002

Jacket, Water, Super Short

$1,175.00

Needle, Nozzle Pin, 3.78 LG

GG M0663003

Needle, Nozzle Pin, 3.78 LG

$230.00

Cable, Sensor Cable Assembly

GG M24022

Cable, Sensor Cable Assembly

$865.00

Nozzle Grip, L

GG M1051-1

Nozzle Grip, L

$4,240.00

Gasket, 1 Qt. Cup

GG M70424

Gasket, 1 Qt. Cup

$7.65

Check Valve Assembly, Medical, 3/4" Nptf

GG M2-7M

Check Valve Assembly, Medical, 3/4" Nptf

$320.00

Screw, SS, Cup 1/4-28.19

GG M70430

Screw, SS, Cup 1/4-28.19

$4.35

PROMIX PD2K PROPORTIONER, SYS, PD1K, MANUAL, DP

GG MC0502

PROMIX PD2K PROPORTIONER, SYS, PD1K, MANUAL, DP

Graco MC0502 ProMix PD2K Manual Proportioner, Dual Panel, Control Module Only

100% Positive Displacement Technology for accurate mix ratios and consistent performance. Great for short pot life materials, the ProMix PD mixes the material close to the gun so the flush zone is significantly smaller. This allows for faster color changes, less material usage and disposal costs overall.

Up to 80% reduction in flushing waste over the most efficient traditional proportioning systems
Faster color changes and less material to flush mean less waste and less downtime
Stalls under pressure for consistent, on-ratio results (within 1% accuracy)
Field serviceable in less than 20 minutes - no need for costly factory rebuilds like gear pumps

Model: ProMix
Series: PD2K

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Applicator Type: Manual
Component Type: Single Component
Flush Type: Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Material Type: Single Component
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 16
Maximum Working Pressure (bar): 7
Maximum Working Pressure (kPa): 700
Maximum Working Pressure (MPa): 0.7
Maximum Working Pressure (psi): 100
Measuring Type: Meter
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: Up to 4
Number of Color Valves: N/A
Number of Resin Colors: Up to 30
Power Source: Electric
Pressure Type: Low or High Pressure
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$27,630.00

Mbl Lubricator, Gbl

GG MBC2EA

Mbl Lubricator, Gbl

$4,300.00

PROMIX PD2K PROPORTIONER, SYSTEM, PD, MANUAL, LP

GG MC1000

PROMIX PD2K PROPORTIONER, SYSTEM, PD, MANUAL, LP

Graco MC1000 ProMix PD2K Manual Proportioner, Standard, Low Pressure, 70 cc Resin Pump, 35 cc Catalyst Pump, 1 Solvent Valve

Up to 80% reduction in flushing waste over the most efficient traditional proportioning systems
Faster color changes and less material to flush mean less waste and less downtime
Stalls under pressure for consistent, on-ratio results (within 1% accuracy)
Field serviceable in less than 20 minutes - no need for costly factory rebuilds like gear pumps

Model: ProMix
Series: PD2K

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Applicator Type: Manual
Component Type: Two Component
Flush Type: Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Material Type: Plural Component
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 30
Maximum Working Pressure (bar): 7
Maximum Working Pressure (kPa): 700
Maximum Working Pressure (MPa): 0.7
Maximum Working Pressure (psi): 100
Measuring Type: Meter
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: Up to 4
Number of Color Valves: N/A
Number of Resin Colors: Up to 30
Power Source: Electric
Pressure Type: Low Pressure
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$54,960.00

PROMIX PD2K PROPORTIONER, SYS, DP, MANUAL, LP

GG MC1002

PROMIX PD2K PROPORTIONER, SYS, DP, MANUAL, LP

ProMix PD2K Manual Proportioner, Dual Panel, Low Pressure, 70 cc Resin Pump, 35 cc Catalyst Pump, 2 Solvent Valves 100% Positive Displacement Technology for accurate mix ratios and consistent performance. Great for short pot life materials, the ProMix PD mixes the material close to the gun so the flush zone is significantly smaller. This allows for faster color changes, less material usage and disposal costs overall. Up to 80% reduction in flushing waste over the most efficient traditional proportioning systems Faster color changes and less material to flush mean less waste and less downtime Stalls under pressure for consistent, on-ratio results (within 1% accuracy) Proportion both epoxy and urethane with ONE system Field serviceable in less than 20 minutes - no need for costly factory rebuilds like gear pumps

$61,420.00

PROMIX PD2K PROPORTIONER, SYSTEM, PD, MANUAL, HP

GG MC2000

PROMIX PD2K PROPORTIONER, SYSTEM, PD, MANUAL, HP

ProMix PD2K Manual Proportioner, Standard, High Pressure, 70 cc Resin Pump, 35 cc Catalyst Pump, 1 Solvent Valve 100% Positive Displacement Technology for accurate mix ratios and consistent performance. Great for short pot life materials, the ProMix PD mixes the material close to the gun so the flush zone is significantly smaller. This allows for faster color changes, less material usage and disposal costs overall. Up to 80% reduction in flushing waste over the most efficient traditional proportioning systems Faster color changes and less material to flush mean less waste and less downtime Stalls under pressure for consistent, on-ratio results (within 1% accuracy) Proportion both epoxy and urethane with ONE system Field serviceable in less than 20 minutes - no need for costly factory rebuilds like gear pumps

$58,880.00

PROMIX 2KS PROPORTIONER, MANUAL SYSTEM

GG MD1001

PROMIX 2KS PROPORTIONER, MANUAL SYSTEM

ProMix 2KS Manual Wall Panel, EasyKey with LCD display, G3000 A & B Meter, 1 color, 1 catalyst, and 1 Air Flow Switch Easy to use electronic proportioner for a broad range of solventborne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material. Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth. Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing Intrinsically safe fluid panels easily integrate into hazardous areas Accurate ratio assurance for superior finish quality Advanced web interface provides consolidated system management and reporting

$46,580.00

PROMIX 2KS PROPORTIONER MANUAL

GG MD1002

PROMIX 2KS PROPORTIONER MANUAL

Graco MD1002 ProMix 2KS Manual Wall Panel, EasyKey with LCD display, G3000 A & B Meter, 1 color, 1 catalyst, and 2 Air Flow Switches

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Applicator Type: Manual
Component Type: Two Component
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Material Type: Two Component
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 3000
Maximum Fluid Viscosity (cP): 3000
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 3
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 1
Number of Color Valves: 1 Valve
Number of Colors: 1
Number of Resin Colors: 1
Power Source: Electric
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$48,220.00

PROMIX 2KS PROPORTIONER MANUAL

GG MD1003

PROMIX 2KS PROPORTIONER MANUAL

Graco MD1003 ProMix 2KS Manual Wall Panel System, EasyKey, G3000 A & B Meter, Single Color, Single Catalyst, 1 Air Flow Switch with 1 Gun Flush Box

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

$55,530.00

PROMIX 2KS PROPORTIONER MANUAL

GG MD1004

PROMIX 2KS PROPORTIONER MANUAL

Graco MD1004 ProMix 2KS Manual Wall Panel, EasyKey, G3000 A & B Meter, 1 Color, 1 Catalyst, 2 Air Flow Switches, 2 Gun Flush Boxes

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Applicator Type: Manual
Component Type: Two Component
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (cm): 0.635
Fluid Outlet Size (in): 1/4
Fluid Outlet Size (mm): 6.35
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Material Type: Two Component
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 3000
Maximum Fluid Viscosity (cP): 3000
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 3
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 1
Number of Color Valves: 1 Valve
Number of Colors: 1
Number of Resin Colors: 1
Power Source: Electric
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$61,010.00

PROMIX 2KS PROPORTIONER, MANUAL

GG MD1101

PROMIX 2KS PROPORTIONER, MANUAL

ProMix 2KS Manual Wall Panel, EasyKey with LCD display, G3000 A & B Meter, 2 colors LP, 1 catalyst, and 1 Air Flow Switch Easy to use electronic proportioner for a broad range of solventborne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material. Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth. Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing Intrinsically safe fluid panels easily integrate into hazardous areas Accurate ratio assurance for superior finish quality Advanced web interface provides consolidated system management and reporting

$55,920.00

PROMIX 2KS PROPORTIONER MANUAL

GG MD1102

PROMIX 2KS PROPORTIONER MANUAL

Graco MD1102 ProMix 2KS Manual Wall Panel, EasyKey with LCD display, G3000 A & B Meter, 2 colors LP, 1 catalyst, and 2 Air Flow Switches

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Applicator Type: Manual
Component Type: Two Component
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (cm): 0.635
Fluid Outlet Size (in): 1/4
Fluid Outlet Size (mm): 6.35
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Material Type: Two Component
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 3000
Maximum Fluid Viscosity (cP): 3000
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 3
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 1
Number of Color Valves: 2 Valves
Number of Colors: 2
Number of Resin Colors: 2
Power Source: Electric
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$56,770.00

PROMIX 2KS PROPORTIONER MANUAL

GG MD1104

PROMIX 2KS PROPORTIONER MANUAL

Graco MD1104 ProMix 2KS Manual Wall Panel, EasyKey, G3000 A & B Meter, 2 Colors LP, 1 Catalyst, 2 Air Flow Switches, 2 Gun Flush Boxes

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Applicator Type: Manual
Component Type: Two Component
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Material Type: Two Component
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 3000
Maximum Fluid Viscosity (cP): 3000
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 3
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 1
Number of Color Valves: 2 Valves
Number of Colors: 2
Number of Resin Colors: 2
Power Source: Electric
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$69,420.00

PROMIX 2KS PROPORTIONER, MANUAL

GG MD1111

PROMIX 2KS PROPORTIONER, MANUAL

Graco MD1111 ProMix 2KS Manual Wall Panel System, EasyKey with LCD display, G3000 A & B Meter, 2 colors LP, 2 catalysts LP, and 1 Air Flow Switch

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Applicator Type: Manual
Component Type: Two Component
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Material Type: Two Component
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 3000
Maximum Fluid Viscosity (cP): 3000
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 3
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 2
Number of Color Valves: 2 Valves
Number of Colors: 2
Number of Resin Colors: 2
Power Source: Electric
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$66,370.00

PROMIX 2KS PROPORTIONER, MANUAL

GG MD1113

PROMIX 2KS PROPORTIONER, MANUAL

ProMix 2KS Manual Wall Panel System, EasyKey, G3000 A & B Meter, 2 Colors LP, 2 Catalysts LP, 1 Air Flow Switch with 1 Gun Flush Box Easy to use electronic proportioner for a broad range of solventborne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material. Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth. Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing Intrinsically safe fluid panels easily integrate into hazardous areas Accurate ratio assurance for superior finish quality Advanced web interface provides consolidated system management and reporting

$74,670.00

PROMIX 2KS PROPORTIONER MANUAL

GG MD1114

PROMIX 2KS PROPORTIONER MANUAL

Graco MD1114 ProMix 2KS Manual Wall Panel, EasyKey, G3000 A & B Meter, 2 Colors LP, 2 Catalysts LP, 2 Air Flow Switches, 2 Gun Flush Boxes

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Applicator Type: Manual
Component Type: Two Component
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Material Type: Two Component
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 3000
Maximum Fluid Viscosity (cP): 3000
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 3
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 2
Number of Color Valves: 2 Valves
Number of Colors: 2
Number of Resin Colors: 2
Power Source: Electric
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$81,790.00

PROMIX 2KS PROPORTIONER, MANUAL

GG MD1202

PROMIX 2KS PROPORTIONER, MANUAL

Graco MD1202 ProMix 2KS Manual Wall Panel, EasyKey with LCD display, G3000 A & B Meter, 4 colors LP, 1 catalyst, and 2 Air Flow Switches

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Applicator Type: Manual
Component Type: Two Component
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Material Type: Two Component
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 3000
Maximum Fluid Viscosity (cP): 3000
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 1
Number of Color Valves: 4 Valves
Number of Colors: 4
Number of Resin Colors: 4
Power Source: Electric
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$62,160.00

PROMIX 2KS PROPORTIONER, MANUAL

GG MD1201

PROMIX 2KS PROPORTIONER, MANUAL

Graco MD1201 ProMix 2KS Manual Wall Panel, EasyKey with LCD display, G3000 A & B Meter, 4 colors LP, 1 catalyst, and 1 Air Flow Switch

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Applicator Type: Manual
Component Type: Two Component
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Material Type: Two Component
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 3000
Maximum Fluid Viscosity (cP): 3000
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 1
Number of Color Valves: 4 Valves
Number of Colors: 4
Number of Resin Colors: 4
Power Source: Electric
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$61,020.00

PROMIX 2KS PROPORTIONER, MANUAL

GG MD1203

PROMIX 2KS PROPORTIONER, MANUAL

Graco MD1203 ProMix 2KS Manual Wall Panel System, EasyKey, G3000 A & B Meter, 4 Colors LP, Single Catalyst, 1 Air Flow Switch with 1 Gun Flush Box

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Applicator Type: Manual
Component Type: Two Component
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Material Type: Two Component
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 3000
Maximum Fluid Viscosity (cP): 3000
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 1
Number of Color Valves: 4 Valves
Number of Colors: 4
Number of Resin Colors: 4
Power Source: Electric
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$68,930.00

PROMIX 2KS PROPORTIONER, MANUAL

GG MD1204

PROMIX 2KS PROPORTIONER, MANUAL

Graco MD1204 ProMix 2KS Manual Wall Panel, EasyKey, G3000 A & B Meter, 4 Colors LP, 1 Catalyst, 2 Air Flow Switches, 2 Gun Flush Boxes

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Applicator Type: Manual
Component Type: Two Component
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Material Type: Two Component
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 3000
Maximum Fluid Viscosity (cP): 3000
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 1
Number of Color Valves: 4 Valves
Number of Colors: 4
Number of Resin Colors: 4
Power Source: Electric
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$75,670.00

PROMIX 2KS PROPORTIONER MANUAL

GG MD1212

PROMIX 2KS PROPORTIONER MANUAL

Graco MD1212 ProMix 2KS Manual Wall Panel, EasyKey with LCD display, G3000 A & B Meter, 4 colors LP, 2 catalysts LP, and 2 Air Flow Switches

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Applicator Type: Manual
Component Type: Two Component
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (cm): 0.635
Fluid Outlet Size (in): 1/4
Fluid Outlet Size (mm): 6.35
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Material Type: Two Component
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 3000
Maximum Fluid Viscosity (cP): 3000
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 2
Number of Color Valves: 4 Valves
Number of Colors: 4
Number of Resin Colors: 4
Power Source: Electric
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$73,280.00

PROMIX 2KS PROPORTIONER MANUAL

GG MD1504

PROMIX 2KS PROPORTIONER MANUAL

ProMix 2KS Manual Wall Panel, EasyKey, G3000 A & B Meter, 2 Colors HP, 1 Catalyst, 2 Air Flow Switches, 2 Gun Flush Boxes Easy to use electronic proportioner for a broad range of solventborne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material. Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth. Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing Intrinsically safe fluid panels easily integrate into hazardous areas Accurate ratio assurance for superior finish quality Advanced web interface provides consolidated system management and reporting

$72,550.00

PROMIX 2KS PROPORTIONER MANUAL

GG MD1214

PROMIX 2KS PROPORTIONER MANUAL

Graco MD1214 ProMix 2KS Manual Wall Panel, EasyKey, G3000 A & B Meter, 4 Colors LP, 2 Catalysts LP, 2 Air Flow Switches, 2 Gun Flush Boxes

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Applicator Type: Manual
Component Type: Two Component
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Material Type: Two Component
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 3000
Maximum Fluid Viscosity (cP): 3000
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 2
Number of Color Valves: 4 Valves
Number of Colors: 4
Number of Resin Colors: 4
Power Source: Electric
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$83,300.00

PROMIX 2KS PROPORTIONER, MANUAL

GG MD1633

PROMIX 2KS PROPORTIONER, MANUAL

Graco MD1633 ProMix 2KS Manual Wall Panel System, EasyKey, G3000 A & B Meter, 4 Colors HP, 2 Catalysts HP, 1 Air Flow Switch with 1 Gun Flush Box

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Applicator Type: Manual
Component Type: Two Component
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Material Type: Two Component
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 3000
Maximum Fluid Viscosity (cP): 3000
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 2
Number of Color Valves: 4 Valves
Number of Colors: 4
Number of Resin Colors: 4
Power Source: Electric
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$78,720.00

PROMIX 2KS PROPORTIONER MANUAL SYSTEM

GG MD1424

PROMIX 2KS PROPORTIONER MANUAL SYSTEM

Graco MD1424 ProMix 2KS Manual Wall Panel, EasyKey, G3000 A & B Meter, 12 Colors LP, 4 Catalysts LP, 2 Air Flow Switches, 2 Gun Flush Boxes

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Applicator Type: Manual
Component Type: Two Component
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Material Type: Two Component
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 3000
Maximum Fluid Viscosity (cP): 3000
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 4
Number of Color Valves: 12 Valves
Number of Colors: 12
Number of Resin Colors: 12
Power Source: Electric
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$109,860.00

PROMIX 2KS PROPORTIONER MANUAL SYSTEM

GG ME1001

PROMIX 2KS PROPORTIONER MANUAL SYSTEM

Graco ME1001 ProMix 2KS Manual System for Acid Cat with G3000A Meter, 1 Airflow Switch, EasyKey Smart Control and Display

The ProMix 2KS meter-based dosing system for acid catalyzed materials can track the performance of one or two painters and manage a wide range of mix ratios. It’s also easy to set up and manage without touchy adjustments to fluid pressure.

The G3000A meter accurately measures fluid and withstands strong acid due to durable, high grade, stainless steel components, including gears with ceramic bearings.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Applicator Type: Manual
Component Type: Two Component
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Material Type: Two Component
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 3000
Maximum Fluid Viscosity (cP): 3000
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 3
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 1
Number of Color Valves: No Valves
Number of Colors: 1
Number of Resin Colors: 0
Power Source: Electric
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$52,950.00

PROMIX 2KS PROPORTIONER MANUAL

GG ME1004

PROMIX 2KS PROPORTIONER MANUAL

Graco ME1004 ProMix 2KS Manual System for Acid Cat with G3000A Meter, 2 Gun Flush Boxes, EasyKey Smart Control and Display

The G3000A meter accurately measures fluid and withstands strong acid due to durable, high grade, stainless steel components, including gears with ceramic bearings.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Applicator Type: Manual
Component Type: Two Component
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Material Type: Two Component
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 3000
Maximum Fluid Viscosity (cP): 3000
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 3
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 1
Number of Color Valves: No Valves
Number of Colors: 1
Number of Resin Colors: 0
Power Source: Electric
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$72,780.00

Seat Valve Rebuild Kit

GG MK30077

Seat Valve Rebuild Kit

$280.00

Proximity Switch

GG MS4086

Proximity Switch

$5,190.00

PROMIX 2KS PROPORTIONER, MANUAL

GG MD1501

PROMIX 2KS PROPORTIONER, MANUAL

Graco MD1501 ProMix 2KS Manual Wall Panel, EasyKey with LCD display, G3000 A & B Meter, 2 colors HP, 1 catalyst, and 1 Air Flow Switch

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Applicator Type: Manual
Component Type: Two Component
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Material Type: Two Component
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 3000
Maximum Fluid Viscosity (cP): 3000
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 3
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 1
Number of Color Valves: 2 Valves
Number of Colors: 2
Number of Resin Colors: 2
Power Source: Electric
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$61,160.00

PROMIX 2KS PROPORTIONER MANUAL

GG MD1631

PROMIX 2KS PROPORTIONER MANUAL

ProMix 2KS Manual Wall Panel System, EasyKey with LCD display, G3000 A & B Meter, 4 colors HP, 2 catalysts HP, and 1 Air Flow Switch Easy to use electronic proportioner for a broad range of solventborne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material. Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth. Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing Intrinsically safe fluid panels easily integrate into hazardous areas Accurate ratio assurance for superior finish quality Advanced web interface provides consolidated system management and reporting

$71,380.00

Motor, Air, 6500, Low Noise Std

GG N65LN0

Motor, Air, 6500, Low Noise Std

$8,730.00

Motor, 6500, Low-Noise, Remote

GG N65LR0

Motor, 6500, Low-Noise, Remote

$9,030.00

Kit Nozzle

GG NK-32-125

KIT,NOZZLE,6ST,125,WC,SB

Graco NK-32-125 Advanjet Nozzle Kit with 125 small ball carbide 6 mm nozzle

Compatible Material: Waterborne, Solventborne

$750.00

Kit Nozzle

GG NK-32-200

KIT,NOZZLE,6ST,200,WC,SB

Graco NK-32-200 Advanjet Nozzle Kit with 200 small ball carbide 6 mm nozzle

$750.00

Kit, O-Ring, Plt, Sil, 10/Pk

GG NP09-2820

Kit, O-Ring, Plt, Sil, 10/Pk

$75.00

PROMIX 2KS PROPORTIONER MANUAL

GG MD1422

PROMIX 2KS PROPORTIONER MANUAL

Graco MD1422 ProMix 2KS Manual Wall Panel, EasyKey with LCD display, G3000 A & B Meter, 12 colors LP, 4 catalysts LP, and 2 Air Flow Switches

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Applicator Type: Manual
Component Type: Two Component
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (cm): 0.635
Fluid Outlet Size (in): 1/4
Fluid Outlet Size (mm): 6.35
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Material Type: Two Component
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 3000
Maximum Fluid Viscosity (cP): 3000
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 4
Number of Color Valves: 12 Valves
Number of Colors: 12
Number of Resin Colors: 12
Power Source: Electric
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$95,630.00

PROMIX 2KS PROPORTIONER MANUAL

GG MD1304

PROMIX 2KS PROPORTIONER MANUAL

ProMix 2KS Manual Wall Panel, EasyKey, G3000 A & B Meter, 7 Colors LP, 1 Catalyst, 2 Air Flow Switches, 2 Gun Flush Boxes Easy to use electronic proportioner for a broad range of solventborne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material. Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth. Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing Intrinsically safe fluid panels easily integrate into hazardous areas Accurate ratio assurance for superior finish quality Advanced web interface provides consolidated system management and reporting

$82,430.00

PROMIX 2KS PROPORTIONER MANUAL

GG MD1403

PROMIX 2KS PROPORTIONER MANUAL

Graco MD1403 ProMix 2KS Manual Wall Panel System, EasyKey, G3000 A & B Meter, 12 Colors LP, Single Catalyst, 1 Air Flow Switch with 1 Gun Flush Box

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Applicator Type: Manual
Component Type: Two Component
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Material Type: Two Component
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 3000
Maximum Fluid Viscosity (cP): 3000
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 1
Number of Color Valves: 12 Valves
Number of Colors: 12
Number of Resin Colors: 12
Power Source: Electric
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$89,440.00

Kit, O-Ring, Ins, Sil, 10/Pk

GG NP09-2830

Kit, O-Ring, Ins, Sil, 10/Pk

$75.00