GRACO INC. S10595
GRACO INC. S10595 branded products
CHECK-MATE SUPPLY UNIT, 40:1, 0 VOLT, D60, 20L
GG CM114G
GG CM114G
CHECK-MATE SUPPLY UNIT, 40:1, 0 VOLT, D60, 20L
Graco CM114G 40:1 Ratio 20 L D60 Supply Unit
Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.
Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.- 60 liter (16-gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors
- Graco D60 - Provides higher down-force and 60-liter pail capacity
- Industry-first controls give you immediate and important information at the touch of a button
- Platen wipers can be replaced in seconds
- Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
- High-quality, durable parts reduce maintenance time, maximize uptime
- Model: Check-Mate
- Series: D60
- Ambient/Warm Melt/Hot Melt: Ambient
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
- Container Type: Pail
- Control Panel Material: N/A
- Material Container Volume (gal): 5.3
- Material Container Volume (l): 20
- Maximum Air Inlet Pressure (bar): 10.34
- Maximum Air Inlet Pressure (kg/cm²): 10.55
- Maximum Air Inlet Pressure (kPa): 1034
- Maximum Air Inlet Pressure (psi): 150
- Maximum Flow Rate (GPM): 1.6
- Maximum Flow Rate (L/min): 6.1
- Maximum Fluid Pressure (bar): 275.8
- Maximum Fluid Pressure (kPa): 27580
- Maximum Fluid Pressure (psi): 4000
- Maximum Fluid Pressure (bar): 275.8
- Maximum Fluid Pressure (kPa): 27580
- Maximum Fluid Pressure (psi): 4000
- Maximum Height (cm): 226.06
- Maximum Height (ft): 7.42
- Maximum Height (in): 89
- Maximum Height (m): 2.26
- Maximum Height (mm): 2260.6
- Maximum Operating Temperature (°C): 49
- Maximum Operating Temperature (°F): 120
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (MPa): 28
- Maximum Working Pressure (psi): 4000
- Minimum Height (cm): 149.86
- Minimum Height (ft): 4.92
- Minimum Height (in): 59
- Minimum Height (m): 1.5
- Minimum Height (mm): 1498.6
- Overall Depth (cm): 45.72
- Overall Depth (in): 18
- Overall Depth (mm): 457.2
- Overall Width (cm): 71.12
- Overall Width (in): 28
- Overall Width (mm): 711.2
- Power Type: Pneumatic
- Pump Ratio: 40:1
- Pump Type: Priming Piston
- Ram Material: Carbon Steel
$18,170.00
CHECK-MATE SUPPLY UNIT, 63:1, 0 VOLT, S20, 20L
GG CM153B
GG CM153B
CHECK-MATE SUPPLY UNIT, 63:1, 0 VOLT, S20, 20L
Graco CM153B 63:1 Ratio 20 L S20 Supply Unit
Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.
Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials- 20 liter (5-gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors
- Graco S20 - For low-volume applications of medium to high-viscosity materials
- Industry-first controls give you immediate and important information at the touch of a button
- Platen wipers can be replaced in seconds
- Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
- High-quality, durable parts reduce maintenance time, maximize uptime
- Model: Check-Mate
- Series: S20
- Ambient/Warm Melt/Hot Melt: Ambient
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
- Container Type: Pail
- Material Container Volume (gal): 5.3
- Material Container Volume (l): 20
- Maximum Air Inlet Pressure (bar): 8.62
- Maximum Air Inlet Pressure (kg/cm²): 8.79
- Maximum Air Inlet Pressure (kPa): 862
- Maximum Air Inlet Pressure (psi): 125
- Maximum Flow Rate (GPM): 1.6
- Maximum Flow Rate (L/min): 6.1
- Maximum Fluid Pressure (bar): 434.4
- Maximum Fluid Pressure (kPa): 43440
- Maximum Fluid Pressure (psi): 6300
- Maximum Fluid Pressure (bar): 434.4
- Maximum Fluid Pressure (kPa): 43440
- Maximum Fluid Pressure (psi): 6300
- Maximum Height (cm): 150.6
- Maximum Height (ft): 4.94
- Maximum Height (in): 59.3
- Maximum Height (m): 1.51
- Maximum Height (mm): 1506
- Maximum Operating Temperature (°C): 49
- Maximum Operating Temperature (°F): 120
- Maximum Working Pressure (bar): 441
- Maximum Working Pressure (kPa): 44100
- Maximum Working Pressure (MPa): 44.1
- Maximum Working Pressure (psi): 6300
- Minimum Height (cm): 90.9
- Minimum Height (ft): 2.98
- Minimum Height (in): 35.8
- Minimum Height (m): 0.91
- Minimum Height (mm): 909
- Overall Depth (cm): 48.26
- Overall Depth (in): 19
- Overall Depth (mm): 482.6
- Overall Width (cm): 43.18
- Overall Width (in): 17
- Overall Width (mm): 431.8
- Power Type: Pneumatic
- Pump Ratio: 63:1
- Pump Type: Priming Piston
- Ram Material: Carbon Steel
$15,290.00
CHECK-MATE D200 63:1 Ratio 200 L 3.0 RAM Supply Unit
GG CM165A
GG CM165A
CHECK-MATE D200 63:1 Ratio 200 L 3.0 RAM Supply Unit
Call for pricing
CHECK-MATE SUPPLY UNIT, 23:1, 6.5 RAM, 200L
GG CM2179
GG CM2179
CHECK-MATE SUPPLY UNIT, 23:1, 6.5 RAM, 200L
23:1 Ratio 200 L 6.5 RAM Supply UnitGraco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.
Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials. For large drums up to 200 liter (55 gal) Graco D200s - For heavy-duty, high-volume applications of high-viscosity materials. Provides more down-force for difficult-to-move materials Industry-first controls give you immediate and important information at the touch of a button Quick placement of drum Platen wipers can be replaced in seconds Pump's quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram High-quality, durable parts reduce maintenance time, maximize uptime
$55,010.00
CHECK-MATE SUPPLY UNIT, 36:1, 3.0 RAM, 200L
GG CM2F59
GG CM2F59
CHECK-MATE SUPPLY UNIT, 36:1, 3.0 RAM, 200L
Graco CM2F59 36:1 Ratio 200 L 3.0 RAM Supply Unit
Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.
Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.- For large drums up to 200 liter (55 gal)
- Graco D200 - For high-volume in-plant applications
- Industry-first controls give you immediate and important information at the touch of a button
- Platen wipers can be replaced in seconds
- Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
- High-quality, durable parts reduce maintenance time, maximize uptime
- Model: Check-Mate
- Series: D200
- Ambient/Warm Melt/Hot Melt: Ambient
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
- Container Type: Drum
- Material Container Volume (gal): 52.8
- Material Container Volume (l): 200
- Maximum Air Inlet Pressure (bar): 10.34
- Maximum Air Inlet Pressure (kg/cm²): 10.55
- Maximum Air Inlet Pressure (kPa): 1034
- Maximum Air Inlet Pressure (psi): 150
- Maximum Flow Rate (GPM): 3.2
- Maximum Flow Rate (L/min): 12.1
- Maximum Fluid Pressure (bar): 248.2
- Maximum Fluid Pressure (kPa): 24820
- Maximum Fluid Pressure (psi): 3600
- Maximum Fluid Pressure (bar): 248.2
- Maximum Fluid Pressure (kPa): 24820
- Maximum Fluid Pressure (psi): 3600
- Maximum Height (cm): 259.9
- Maximum Height (ft): 8.53
- Maximum Height (in): 102.3
- Maximum Height (m): 2.6
- Maximum Height (mm): 2599
- Maximum Operating Temperature (°C): 49
- Maximum Operating Temperature (°F): 120
- Maximum Working Pressure (bar): 252
- Maximum Working Pressure (kPa): 25200
- Maximum Working Pressure (MPa): 25.2
- Maximum Working Pressure (psi): 3600
- Minimum Height (cm): 164.6
- Minimum Height (ft): 5.4
- Minimum Height (in): 64.8
- Minimum Height (m): 1.65
- Minimum Height (mm): 1646
- Overall Depth (cm): 63.5
- Overall Depth (in): 25
- Overall Depth (mm): 635
- Overall Width (cm): 106.7
- Overall Width (in): 42
- Overall Width (mm): 1067
- Power Type: Pneumatic
- Pump Ratio: 36:1
- Pump Type: Priming Piston
- Ram Material: Carbon Steel
$34,930.00
CHECK-MATE SUPPLY UNIT, 63:1, 3.0 RAM, 200L
GG CM155A
GG CM155A
CHECK-MATE SUPPLY UNIT, 63:1, 3.0 RAM, 200L
Graco CM155A 63:1 Ratio 200 L 3.0 RAM Supply Unit
Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.
Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.- For large drums up to 200 liter (55 gal)
- Graco D200 - For high-volume in-plant applications
- Industry-first controls give you immediate and important information at the touch of a button
- Platen wipers can be replaced in seconds
- Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
- High-quality, durable parts reduce maintenance time, maximize uptime
- Model: Check-Mate
- Series: D200
- Ambient/Warm Melt/Hot Melt: Ambient
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
- Container Type: Drum
- Material Container Volume (gal): 52.8
- Material Container Volume (l): 200
- Maximum Air Inlet Pressure (bar): 10.34
- Maximum Air Inlet Pressure (kg/cm²): 10.55
- Maximum Air Inlet Pressure (kPa): 1034
- Maximum Air Inlet Pressure (psi): 150
- Maximum Flow Rate (GPM): 1.6
- Maximum Flow Rate (L/min): 6.1
- Maximum Fluid Pressure (bar): 434.4
- Maximum Fluid Pressure (kPa): 43440
- Maximum Fluid Pressure (psi): 6300
- Maximum Fluid Pressure (bar): 434.4
- Maximum Fluid Pressure (kPa): 43440
- Maximum Fluid Pressure (psi): 6300
- Maximum Height (cm): 259.9
- Maximum Height (ft): 8.53
- Maximum Height (in): 102.3
- Maximum Height (m): 2.6
- Maximum Height (mm): 2599
- Maximum Operating Temperature (°C): 49
- Maximum Operating Temperature (°F): 120
- Maximum Working Pressure (bar): 441
- Maximum Working Pressure (kPa): 44100
- Maximum Working Pressure (MPa): 44.1
- Maximum Working Pressure (psi): 6300
- Minimum Height (cm): 164.6
- Minimum Height (ft): 5.4
- Minimum Height (in): 64.8
- Minimum Height (m): 1.65
- Minimum Height (mm): 1646
- Overall Depth (cm): 63.5
- Overall Depth (in): 25
- Overall Depth (mm): 635
- Overall Width (cm): 106.7
- Overall Width (in): 42
- Overall Width (mm): 1067
- Power Type: Pneumatic
- Pump Ratio: 63:1
- Pump Type: Priming Piston
- Ram Material: Carbon Steel
$21,650.00
CHECK-MATE SUPPLY UNIT, 68:1, 6.5 RAM, 200L
GG CM2L79
GG CM2L79
CHECK-MATE SUPPLY UNIT, 68:1, 6.5 RAM, 200L
Graco CM2L79 68:1 Ratio 200 L 6.5 RAM Supply Unit
Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.
Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.- For large drums up to 200 liter (55 gal)
- Graco D200s - For heavy-duty, high-volume applications of high-viscosity materials. Provides more down-force for difficult-to-move materials
- Industry-first controls give you immediate and important information at the touch of a button
- Platen wipers can be replaced in seconds
- Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
- High-quality, durable parts reduce maintenance time, maximize uptime
- Model: Check-Mate
- Series: D200s
- Ambient/Warm Melt/Hot Melt: Ambient
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
- Container Type: Drum
- Material Container Volume (gal): 52.8
- Material Container Volume (l): 200
- Maximum Air Inlet Pressure (bar): 8.62
- Maximum Air Inlet Pressure (kg/cm²): 8.79
- Maximum Air Inlet Pressure (kPa): 862
- Maximum Air Inlet Pressure (psi): 125
- Maximum Flow Rate (GPM): 3.2
- Maximum Flow Rate (L/min): 12.1
- Maximum Fluid Pressure (bar): 427.5
- Maximum Fluid Pressure (kPa): 42750
- Maximum Fluid Pressure (psi): 6200
- Maximum Fluid Pressure (bar): 427.5
- Maximum Fluid Pressure (kPa): 42750
- Maximum Fluid Pressure (psi): 6200
- Maximum Height (cm): 266.5
- Maximum Height (ft): 8.74
- Maximum Height (in): 104.9
- Maximum Height (m): 2.66
- Maximum Height (mm): 2665
- Maximum Operating Temperature (°C): 49
- Maximum Operating Temperature (°F): 120
- Maximum Working Pressure (bar): 434
- Maximum Working Pressure (kPa): 43400
- Maximum Working Pressure (MPa): 43.4
- Maximum Working Pressure (psi): 6200
- Minimum Height (cm): 178.5
- Minimum Height (ft): 5.86
- Minimum Height (in): 70.3
- Minimum Height (m): 1.79
- Minimum Height (mm): 1785
- Overall Depth (cm): 63.5
- Overall Depth (in): 25
- Overall Depth (mm): 635
- Overall Width (cm): 121.9
- Overall Width (in): 48
- Overall Width (mm): 1219
- Power Type: Pneumatic
- Pump Ratio: 68:1
- Pump Type: Priming Piston
- Ram Material: Carbon Steel
$26,900.00
REPLACED BY GG RCM154B
GG CM154B
GG CM154B
CHECK-MATE SUPPLY UNIT, 63:1, 0 VOLT, D60, 20L
63:1 Ratio 20 L D60 Supply UnitGraco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.
Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials. 60 liter (16-gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors Graco D60 - Provides higher down-force and 60-liter pail capacity Industry-first controls give you immediate and important information at the touch of a button Quick placement of pail Platen wipers can be replaced in seconds Pump's quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram High-quality, durable parts reduce maintenance time, maximize uptime
$19,300.00
CHECK-MATE SUPPLY UNIT, 63:1, 0 V, S20 CART, 20L
GG CM1T2F
GG CM1T2F
CHECK-MATE SUPPLY UNIT, 63:1, 0 V, S20 CART, 20L
Graco CM1T2F Supply Unit, Check-Mate, 63:1, S/S, Severe Duty, 3 in. S20c Ram, Integrated Air Controls, 20L S/S Flat Platen, Single PTFE Wiper
Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.
Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.- 20 liter (5 gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors
- Graco S20c - Same as the S20, but includes a cart
- Industry-first controls give you immediate and important information at the touch of a button
- Platen wipers can be replaced in seconds
- Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
- High-quality, durable parts reduce maintenance time, maximize uptime
- Model: Check-Mate
- Series: S20c
- Ambient/Warm Melt/Hot Melt: Ambient
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
- Container Type: Pail
- Material Container Volume (gal): 5.3
- Material Container Volume (l): 20
- Maximum Air Inlet Pressure (bar): 8.62
- Maximum Air Inlet Pressure (kg/cm²): 8.79
- Maximum Air Inlet Pressure (kPa): 862
- Maximum Air Inlet Pressure (psi): 125
- Maximum Flow Rate (GPM): 1.6
- Maximum Flow Rate (L/min): 6.1
- Maximum Fluid Pressure (bar): 434.4
- Maximum Fluid Pressure (kPa): 43440
- Maximum Fluid Pressure (psi): 6300
- Maximum Fluid Pressure (bar): 434.4
- Maximum Fluid Pressure (kPa): 43440
- Maximum Fluid Pressure (psi): 6300
- Maximum Height (cm): 228.6
- Maximum Height (ft): 7.5
- Maximum Height (in): 90
- Maximum Height (m): 2.29
- Maximum Height (mm): 2286
- Maximum Operating Temperature (°C): 49
- Maximum Operating Temperature (°F): 120
- Maximum Working Pressure (bar): 441
- Maximum Working Pressure (kPa): 44100
- Maximum Working Pressure (MPa): 44.1
- Maximum Working Pressure (psi): 6300
- Minimum Height (cm): 165.1
- Minimum Height (ft): 5.42
- Minimum Height (in): 65
- Minimum Height (m): 1.65
- Minimum Height (mm): 1651
- Overall Depth (cm): 66.1
- Overall Depth (in): 26
- Overall Depth (mm): 661
- Overall Width (cm): 56.2
- Overall Width (in): 22.1
- Overall Width (mm): 562
- Power Type: Pneumatic
- Pump Ratio: 63:1
- Pump Type: Priming Piston
- Ram Material: Carbon Steel
$22,500.00
CHECK-MATE SUPPLY UNIT, 68:1, 6.5 RAM, 200L
GG CM2M79
GG CM2M79
CHECK-MATE SUPPLY UNIT, 68:1, 6.5 RAM, 200L
Graco CM2M79 68:1 Ratio 200 L 6.5 RAM Supply Unit
Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.
Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.- For large drums up to 200 liter (55 gal)
- Graco D200s - For heavy-duty, high-volume applications of high-viscosity materials. Provides more down-force for difficult-to-move materials
- Industry-first controls give you immediate and important information at the touch of a button
- Platen wipers can be replaced in seconds
- Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
- High-quality, durable parts reduce maintenance time, maximize uptime
- Model: Check-Mate
- Series: D200s
- Ambient/Warm Melt/Hot Melt: Ambient
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
- Container Type: Drum
- Material Container Volume (gal): 52.8
- Material Container Volume (l): 200
- Maximum Air Inlet Pressure (bar): 8.62
- Maximum Air Inlet Pressure (kg/cm²): 8.79
- Maximum Air Inlet Pressure (kPa): 862
- Maximum Air Inlet Pressure (psi): 125
- Maximum Flow Rate (GPM): 3.2
- Maximum Flow Rate (L/min): 12.1
- Maximum Fluid Pressure (bar): 427.5
- Maximum Fluid Pressure (kPa): 42750
- Maximum Fluid Pressure (psi): 6200
- Maximum Fluid Pressure (bar): 427.5
- Maximum Fluid Pressure (kPa): 42750
- Maximum Fluid Pressure (psi): 6200
- Maximum Height (cm): 266.5
- Maximum Height (ft): 8.74
- Maximum Height (in): 104.9
- Maximum Height (m): 2.66
- Maximum Height (mm): 2665
- Maximum Operating Temperature (°C): 49
- Maximum Operating Temperature (°F): 120
- Maximum Working Pressure (bar): 434
- Maximum Working Pressure (kPa): 43400
- Maximum Working Pressure (MPa): 43.4
- Maximum Working Pressure (psi): 6200
- Minimum Height (cm): 178.5
- Minimum Height (ft): 5.86
- Minimum Height (in): 70.3
- Minimum Height (m): 1.79
- Minimum Height (mm): 1785
- Overall Depth (cm): 63.5
- Overall Depth (in): 25
- Overall Depth (mm): 635
- Overall Width (cm): 121.9
- Overall Width (in): 48
- Overall Width (mm): 1219
- Power Type: Pneumatic
- Pump Ratio: 68:1
- Pump Type: Priming Piston
- Ram Material: Carbon Steel
Call for pricing
CHECK-MATE SUPPLY UNIT, 63:1, 0 VOLT, D60, 20L
GG CM1T4F
GG CM1T4F
CHECK-MATE SUPPLY UNIT, 63:1, 0 VOLT, D60, 20L
Graco CM1T4F Supply Unit, Check-Mate, 63:1, S/S, Severe Duty, 3 in. D60 Ram, Integrated Air Controls, 20L S/S Flat Platen, Single PTFE Wiper
Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.
Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.- 60 liter (16-gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors
- Graco D60 - Provides higher down-force and 60-liter pail capacity
- Industry-first controls give you immediate and important information at the touch of a button
- Platen wipers can be replaced in seconds
- Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
- High-quality, durable parts reduce maintenance time, maximize uptime
- Model: Check-Mate
- Series: D60
- Ambient/Warm Melt/Hot Melt: Ambient
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
- Container Type: Pail
- Control Panel Material: N/A
- Material Container Volume (gal): 5.3
- Material Container Volume (l): 20
- Maximum Air Inlet Pressure (bar): 10.34
- Maximum Air Inlet Pressure (kg/cm²): 10.55
- Maximum Air Inlet Pressure (kPa): 1034
- Maximum Air Inlet Pressure (psi): 150
- Maximum Flow Rate (GPM): 1.6
- Maximum Flow Rate (L/min): 6.1
- Maximum Fluid Pressure (bar): 434.4
- Maximum Fluid Pressure (kPa): 43440
- Maximum Fluid Pressure (psi): 6300
- Maximum Fluid Pressure (bar): 434.4
- Maximum Fluid Pressure (kPa): 43440
- Maximum Fluid Pressure (psi): 6300
- Maximum Height (cm): 226.06
- Maximum Height (ft): 7.42
- Maximum Height (in): 89
- Maximum Height (m): 2.26
- Maximum Height (mm): 2260.6
- Maximum Operating Temperature (°C): 49
- Maximum Operating Temperature (°F): 120
- Maximum Working Pressure (bar): 441
- Maximum Working Pressure (kPa): 44100
- Maximum Working Pressure (MPa): 44.1
- Maximum Working Pressure (psi): 6300
- Minimum Height (cm): 149.86
- Minimum Height (ft): 4.92
- Minimum Height (in): 59
- Minimum Height (m): 1.5
- Minimum Height (mm): 1498.6
- Overall Depth (cm): 45.72
- Overall Depth (in): 18
- Overall Depth (mm): 457.2
- Overall Width (cm): 71.12
- Overall Width (in): 28
- Overall Width (mm): 711.2
- Power Type: Pneumatic
- Pump Ratio: 63:1
- Pump Type: Priming Piston
- Ram Material: Carbon Steel
$25,990.00
CHECK-MATE SUPPLY UNIT, 36:1, 0 VOLT, D60, 20L
GG CM2A4B
GG CM2A4B
CHECK-MATE SUPPLY UNIT, 36:1, 0 VOLT, D60, 20L
Graco CM2A4B 36:1 Ratio 20 L D60 Supply Unit
Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.
Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.- 60 liter (16-gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors
- Graco D60 - Provides higher down-force and 60-liter pail capacity
- Industry-first controls give you immediate and important information at the touch of a button
- Platen wipers can be replaced in seconds
- Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
- High-quality, durable parts reduce maintenance time, maximize uptime
- Model: Check-Mate
- Series: D60
- Ambient/Warm Melt/Hot Melt: Ambient
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
- Container Type: Pail
- Control Panel Material: N/A
- Material Container Volume (gal): 5.3
- Material Container Volume (l): 20
- Maximum Air Inlet Pressure (bar): 10.34
- Maximum Air Inlet Pressure (kg/cm²): 10.55
- Maximum Air Inlet Pressure (kPa): 1034
- Maximum Air Inlet Pressure (psi): 150
- Maximum Flow Rate (GPM): 3.2
- Maximum Flow Rate (L/min): 12.1
- Maximum Fluid Pressure (bar): 248.2
- Maximum Fluid Pressure (kPa): 24820
- Maximum Fluid Pressure (psi): 3600
- Maximum Fluid Pressure (bar): 248.2
- Maximum Fluid Pressure (kPa): 24820
- Maximum Fluid Pressure (psi): 3600
- Maximum Height (cm): 226.06
- Maximum Height (ft): 7.42
- Maximum Height (in): 89
- Maximum Height (m): 2.26
- Maximum Height (mm): 2260.6
- Maximum Operating Temperature (°C): 49
- Maximum Operating Temperature (°F): 120
- Maximum Working Pressure (bar): 252
- Maximum Working Pressure (kPa): 25200
- Maximum Working Pressure (MPa): 25.2
- Maximum Working Pressure (psi): 3600
- Minimum Height (cm): 149.86
- Minimum Height (ft): 4.92
- Minimum Height (in): 59
- Minimum Height (m): 1.5
- Minimum Height (mm): 1498.6
- Overall Depth (cm): 45.72
- Overall Depth (in): 18
- Overall Depth (mm): 457.2
- Overall Width (cm): 71.12
- Overall Width (in): 28
- Overall Width (mm): 711.2
- Power Type: Pneumatic
- Pump Ratio: 36:1
- Pump Type: Priming Piston
- Ram Material: Carbon Steel
Call for pricing
CHECK-MATE SUPPLY UNIT, 55:1, 3.0 RAM, 200L
GG CM395A
GG CM395A
CHECK-MATE SUPPLY UNIT, 55:1, 3.0 RAM, 200L
Graco CM395A 55:1 Ratio 200 L 3.0 RAM Supply Unit
Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.
Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.- For large drums up to 200 liter (55 gal)
- Graco D200 - For high-volume in-plant applications
- Industry-first controls give you immediate and important information at the touch of a button
- Platen wipers can be replaced in seconds
- Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
- High-quality, durable parts reduce maintenance time, maximize uptime
- Model: Check-Mate
- Series: D200
- Ambient/Warm Melt/Hot Melt: Ambient
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
- Container Type: Drum
- Material Container Volume (gal): 52.8
- Material Container Volume (l): 200
- Maximum Air Inlet Pressure (bar): 10.34
- Maximum Air Inlet Pressure (kg/cm²): 10.55
- Maximum Air Inlet Pressure (kPa): 1034
- Maximum Air Inlet Pressure (psi): 150
- Maximum Flow Rate (GPM): 4
- Maximum Flow Rate (L/min): 15.1
- Maximum Fluid Pressure (bar): 379.2
- Maximum Fluid Pressure (kPa): 37920
- Maximum Fluid Pressure (psi): 5500
- Maximum Fluid Pressure (bar): 379.2
- Maximum Fluid Pressure (kPa): 37920
- Maximum Fluid Pressure (psi): 5500
- Maximum Height (cm): 259.9
- Maximum Height (ft): 8.53
- Maximum Height (in): 102.3
- Maximum Height (m): 2.6
- Maximum Height (mm): 2599
- Maximum Operating Temperature (°C): 49
- Maximum Operating Temperature (°F): 120
- Maximum Working Pressure (bar): 385
- Maximum Working Pressure (kPa): 38500
- Maximum Working Pressure (MPa): 38.5
- Maximum Working Pressure (psi): 5500
- Minimum Height (cm): 164.6
- Minimum Height (ft): 5.4
- Minimum Height (in): 64.8
- Minimum Height (m): 1.65
- Minimum Height (mm): 1646
- Overall Depth (cm): 63.5
- Overall Depth (in): 25
- Overall Depth (mm): 635
- Overall Width (cm): 106.7
- Overall Width (in): 42
- Overall Width (mm): 1067
- Power Type: Pneumatic
- Pump Ratio: 55:1
- Pump Type: Priming Piston
- Ram Material: Carbon Steel
$26,980.00
CHECK-MATE SUPPLY UNIT, 55:1, 6.5 RAM, 200L
GG CM3979
GG CM3979
CHECK-MATE SUPPLY UNIT, 55:1, 6.5 RAM, 200L
Graco CM3979 55:1 Ratio 200 L 6.5 RAM Supply Unit
Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.
Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.- For large drums up to 200 liter (55 gal)
- Graco D200s - For heavy-duty, high-volume applications of high-viscosity materials. Provides more down-force for difficult-to-move materials
- Industry-first controls give you immediate and important information at the touch of a button
- Platen wipers can be replaced in seconds
- Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
- High-quality, durable parts reduce maintenance time, maximize uptime
- Model: Check-Mate
- Series: D200s
- Ambient/Warm Melt/Hot Melt: Ambient
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
- Container Type: Drum
- Material Container Volume (gal): 52.8
- Material Container Volume (l): 200
- Maximum Air Inlet Pressure (bar): 8.62
- Maximum Air Inlet Pressure (kg/cm²): 8.79
- Maximum Air Inlet Pressure (kPa): 862
- Maximum Air Inlet Pressure (psi): 125
- Maximum Flow Rate (GPM): 4
- Maximum Flow Rate (L/min): 15.1
- Maximum Fluid Pressure (bar): 379.2
- Maximum Fluid Pressure (kPa): 37920
- Maximum Fluid Pressure (psi): 5500
- Maximum Fluid Pressure (bar): 379.2
- Maximum Fluid Pressure (kPa): 37920
- Maximum Fluid Pressure (psi): 5500
- Maximum Height (cm): 266.5
- Maximum Height (ft): 8.74
- Maximum Height (in): 104.9
- Maximum Height (m): 2.66
- Maximum Height (mm): 2665
- Maximum Operating Temperature (°C): 49
- Maximum Operating Temperature (°F): 120
- Maximum Working Pressure (bar): 385
- Maximum Working Pressure (kPa): 38500
- Maximum Working Pressure (MPa): 38.5
- Maximum Working Pressure (psi): 5500
- Minimum Height (cm): 178.5
- Minimum Height (ft): 5.86
- Minimum Height (in): 70.3
- Minimum Height (m): 1.79
- Minimum Height (mm): 1785
- Overall Depth (cm): 63.5
- Overall Depth (in): 25
- Overall Depth (mm): 635
- Overall Width (cm): 121.9
- Overall Width (in): 48
- Overall Width (mm): 1219
- Power Type: Pneumatic
- Pump Ratio: 55:1
- Pump Type: Priming Piston
- Ram Material: Carbon Steel
$28,630.00
CHECK-MATE SUPPLY UNIT, 36:1, 0 VOLT, D60, 20L
GG CM2F4F
GG CM2F4F
CHECK-MATE SUPPLY UNIT, 36:1, 0 VOLT, D60, 20L
Graco CM2F4F 36:1 Ratio 20 L D60 Supply Unit
Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.
Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.- 60 liter (16-gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors
- Graco D60 - Provides higher down-force and 60-liter pail capacity
- Industry-first controls give you immediate and important information at the touch of a button
- Platen wipers can be replaced in seconds
- Pump&prime, s quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
- High-quality, durable parts reduce maintenance time, maximize uptime
- Model: Check-Mate
- Series: D60
- Ambient/Warm Melt/Hot Melt: Ambient
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
- Container Type: Pail
- Control Panel Material: N/A
- Material Container Volume (gal): 5.3
- Material Container Volume (l): 20
- Maximum Air Inlet Pressure (bar): 10.34
- Maximum Air Inlet Pressure (kg/cm²): 10.55
- Maximum Air Inlet Pressure (kPa): 1034
- Maximum Air Inlet Pressure (psi): 150
- Maximum Flow Rate (GPM): 3.2
- Maximum Flow Rate (L/min): 12.1
- Maximum Fluid Pressure (bar): 248.2
- Maximum Fluid Pressure (kPa): 24820
- Maximum Fluid Pressure (psi): 3600
- Maximum Fluid Pressure (bar): 248.2
- Maximum Fluid Pressure (kPa): 24820
- Maximum Fluid Pressure (psi): 3600
- Maximum Height (cm): 226.06
- Maximum Height (ft): 7.42
- Maximum Height (in): 89
- Maximum Height (m): 2.26
- Maximum Height (mm): 2260.6
- Maximum Operating Temperature (°C): 49
- Maximum Operating Temperature (°F): 120
- Maximum Working Pressure (bar): 252
- Maximum Working Pressure (kPa): 25200
- Maximum Working Pressure (MPa): 25.2
- Maximum Working Pressure (psi): 3600
- Minimum Height (cm): 149.86
- Minimum Height (ft): 4.92
- Minimum Height (in): 59
- Minimum Height (m): 1.5
- Minimum Height (mm): 1498.6
- Overall Depth (cm): 45.72
- Overall Depth (in): 18
- Overall Depth (mm): 457.2
- Overall Width (cm): 71.12
- Overall Width (in): 28
- Overall Width (mm): 711.2
- Power Type: Pneumatic
- Pump Ratio: 36:1
- Pump Type: Priming Piston
- Ram Material: Carbon Steel
$32,750.00
SLEEVE, SHROUD, MIXER, 13MMX12EL, 7/
GG 4-419-902C
GG 4-419-902C
SLEEVE, SHROUD, MIXER, 13MMX12EL, 7/
$400.00
Housing, Valve Block, #1, w/Bushing
GG 4-423-01
GG 4-423-01
Housing, Valve Block, #1, w/Bushing
$3,570.00
Ball Seat, 2 Head, Must Be Ordered in Multiple of 5
GG 4-425-02
GG 4-425-02
Ball Seat, 2 Head
$110.00
Insert, Blank, For Sd106 Barrel
GG 4-443-SD-106
GG 4-443-SD-106
Insert, Blank, For Sd106 Barrel
$185.00
3/8in Check Valve Ss
GG 501684
GG 501684
VALVE, CHECK
Graco 501684 Check Valve for Piston Meter Kit for Piston Fluid Flow Meter
Stainless steel and PTFE materials are compatible with catalyst, waterborne, and other finishing materials
Prevent fluid leakage and backflow
Compact and easy to install
Improves pump performance
Easily install a wide variety of flat tips for many spraying option
- Body Material: Stainless Steel
$588.00
1/4in S.S. Check Valve
GG 501867
GG 501867
VALVE, CHECK
Graco 501867 Check Valve
Stainless steel and PTFE materials are compatible with catalyst, waterborne, and other finishing materials
Prevent fluid leakage and backflow
Compact and easy to install
Improves pump performance
Easily install a wide variety of flat tips for many spraying option
$343.00
Screw, Shs, 1/4-20X.31, Hlfdgpt, Ms
GG 5-06-0605HD
GG 5-06-0605HD
Screw, Shs, 1/4-20X.31, Hlfdgpt, Ms
$18.00
MIXER, ELEMENT
GG 514592
GG 514592
MIXER, ELEMENT
Single Pack of Static Mixer 3/8" x 12 element, 316 Stainless Steel coated in PTFE
$1,000.00
Element, Filter, Bag, 150 Micron
GG 521233
GG 521233
ELEMENT, FILTER, BAG
Graco 521233 150 Micron Replacement Filter Bag for Low Pressure Fluid Filters
$18.00
ELEMENT, FILTER, 30 MESH
GG 515222
GG 515222
ELEMENT, FILTER, 30 MESH
Graco 515222 30 Mesh Filter Screen
- Contaminant Size (µm): 595
- For Use With: Fluid Filter Kit
- Mesh Size: 30
$840.00
Valve, Solonoid, 1/2 NPT, 3000PSI
GG 512927
GG 512927
Valve, Solonoid, 1/2 NPT, 3000PSI
Call for pricing
Filter Housing For Gear Meter System
GG 515216
GG 515216
Filter Housing For Gear Meter System
$5,050.00
O-Ring
GG 521691
GG 521691
O-RING,PTFE, ENCAPSULATED PTFE
Graco 521691 PTFE Encapsulated Fluoroelastomer Replacement Gasket
$109.00
Kit, Gun, Repair
GG 249422
GG 249422
KIT, GUN,REPAIR
Graco 249422 Seal Repair Kit, includes replacement o-rings, gasket, u-cup, air valve assembly, and seal installation tool
$95.25
Kit, Needle, Seat, G40
GG 249456
GG 249456
KIT, NEEDLE,SEAT,G40
Graco 249456 Carbide Seat Repair Kit, includes replacement carbide seat, seat gasket, and seat nut
$142.50
FUSION AP GUN, WIDE RND 01
GG 249529
GG 249529
FUSION AP GUN, WIDE RND 01
Graco 249529 Wide Round Fusion Air-Purge Gun with 01 Mix Chamber
With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.
Application: For high output spray polyurethane foam and polyurea applications.- Easy air-blast tip cleaning reduces build-up and tip clogging.
- Long-lasting side seals means less downtime for maintenance
- Quick-release fluid housing - lets you easily change the mix chambers without tools
- Ergonomic handle
- Model: Fusion AP
- Series: Wide
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
- Fluid Orifice Size (cm): 0.099
- Fluid Orifice Size (in): 0.039
- Fluid Orifice Size (mm): 0.99
- Gun Type: Air Purge Gun
- Gun Weight (g): 1130
- Gun Weight (kg): 1.1
- Gun Weight (lb): 2.5
- Gun Weight (oz): 40
- Impingement Port Size (in): 0.039
- Impingement Port Size (mm): 0.99
- Maximum Air Inlet Pressure (bar): 9
- Maximum Air Inlet Pressure (kPa): 900
- Maximum Air Inlet Pressure (MPa): 0.9
- Maximum Air Inlet Pressure (psi): 130
- Maximum Air Pressure (bar): 9
- Maximum Air Pressure (kPa): 900
- Maximum Air Pressure (MPa): 0.9
- Maximum Air Pressure (psi): 130
- Maximum Flow Rate @ PSI (lb/min): 50
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature (°C): 93
- Maximum Fluid Temperature (°F): 200
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature (°C): 93
- Maximum Fluid Temperature (°F): 200
- Minimum Air Inlet Pressure (bar): 5.5
- Minimum Air Inlet Pressure (kPa): 550
- Minimum Air Inlet Pressure (MPa): 0.55
- Minimum Air Inlet Pressure (psi): 80
- Mix Chamber: 01 (.042)
- Overall Height (cm): 20.6
- Overall Height (in): 8.1
- Overall Height (mm): 206
- Overall Length (cm): 19.1
- Overall Length (in): 7.5
- Overall Length (mm): 191
- Overall Width (cm): 8.4
- Overall Width (in): 3.3
- Overall Width (mm): 84
- Pattern Size (in): 16 in @ 24 in from target
$3,680.00
THERM-O-FLOW GUN, HOT MELT, BOTTOM FEED
GG 249514
GG 249514
THERM-O-FLOW GUN, HOT MELT, BOTTOM FEED
Graco 249514 Therm-O-Flo Bottom Feed Manual Gun, 240V
Hot melt dispense gun provides ergonomic, easy-trigger actuation for high pressure, high flow sealant and adhesive applications.
Application: For applying hot melt materials.- Provides accurate dispense control for Therm-O-Flow Systems
- Precise temperature control from PID control panel
- Piston-actuated ball and seat design for positive shut off
- Rugged all metal construction
Provides precise proportional control and variable dispense volume with unique tapered needle valve design
Dual heaters offer rapid warm-up during initial start-up and maintain uniform temperature control
Rugged construction – durable, lightweight anodized aluminum body
Ergonomic, easy-trigger actuation
Designed for easy service – minimal maintenance and downtime
Rated for high-pressure Therm-O-Flow Systems up to 3500 psi (24.1 MPa, 241 bar)
- Model: Therm-O-Flow
- For Use With: Therm-O-Flow
- Maximum Fluid Pressure (bar): 245
- Maximum Fluid Pressure (kPa): 2450
- Maximum Fluid Pressure (MPa): 24.5
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Pressure (bar): 245
- Maximum Fluid Pressure (kPa): 2450
- Maximum Fluid Pressure (MPa): 24.5
- Maximum Fluid Pressure (psi): 3500
$4,250.00
REACTOR HEATED HOSE, 3', 1/4, 2000 PSI
GG 249586
GG 249586
REACTOR HEATED HOSE, 3', 1/4, 2000 PSI
3 ft x 1/4" Whip Hose, 2000 psi, Without Cable, Mesh Scuff, Reactor 1 & 2Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.
For Reactor proportioners.New multi-strand copper heating element has greatly increased hose quality:
- Provides 10-times* the flex life compared to previous flat copper heating element
- Long-term, even heating without hot spots
- Backwards compatible with existing Reactor heated hoses
$810.00
Gun, Hot Melt, Top Outlet with Switch
GG 249513
GG 249513
THERM-O-FLOW GUN,HOT MELT,TOP W/SWITCH
Graco 249513 Manual Top Feed Electric Hot Melt Dispense Gun with Switch
Perfect for high pressure, high flow sealant and adhesive applications, Therm-O-Flow Guns are available with electric switches so they can be used in conjunction with automated equipment.
Application: For applying hot melt materials.
Provides accurate dispense control for Therm-O-Flow Systems
- Provides precise proportional control and variable dispense volume with unique tapered needle valve design
- Dual heaters offer rapid warm-up during initial start-up and maintain uniform temperature control
- Rugged construction - durable, lightweight anodized aluminum body
- Ergonomic, easy-trigger actuation
- Designed for easy service - minimal maintenance and downtime
- Rated for high-pressure Therm-O-Flow Systems up to 3500 psi (24.1 MPa, 241 bar)
Precise temperature control from PID control panel
Piston-actuated ball and seat design for positive shut off
Light trigger pull
Rugged all metal construction
- Model: Therm-O-Flow
- Compatible Material: Sealants, Adhesives
$5,150.00
REACTOR HEATED HOSE, 50', 3/8, W/O CBL, 3500P
GG 249588
GG 249588
REACTOR HEATED HOSE, 50', 3/8, W/O CBL, 3500P
50 ft x 3/8 in Heated Hose, 3500 psi, Without Cable, No Scuff, Reactor 1 & 2Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.
For Reactor proportioners.New multi-strand copper heating element has greatly increased hose quality:
- Provides 10-times* the flex life compared to previous flat copper heating element
- Long-term, even heating without hot spots
- Backwards compatible with existing Reactor heated hoses
$3,410.00
Gun, Hotmelt Bottom w/Switch
GG 249512
GG 249512
THERM-O-FLOW GUN,HOTMELT,BOTTOM W/SWITCH
Graco 249512 Precision Hot Melt Dispense Gun with Switch
Perfect for high pressure, high flow sealant and adhesive applications, Therm-O-Flow Guns are available with electric switches so they can be used in conjunction with automated equipment.
Application:
For applying hot melt materials.
Provides accurate dispense control for Therm-O-Flow Systems
- Provides precise proportional control and variable dispense volume with unique tapered needle valve design
- Dual heaters offer rapid warm-up during initial start-up and maintain uniform temperature control
- Rugged construction - durable, lightweight anodized aluminum body
- Ergonomic, easy-trigger actuation
- Designed for easy service - minimal maintenance and downtime
- Rated for high-pressure Therm-O-Flow Systems up to 3500 psi (24.1 MPa, 241 bar)
Precise temperature control from PID control panel
Piston-actuated ball and seat design for positive shut off
Light trigger pull
Rugged all metal construction
- Model: Therm-O-Flow
$4,890.00