GRACO INC. S10595

GRACO INC. S10595 branded products

View as Grid List

Sort by

MERKUR SYSTEM PUMP 15:01 150CC WA STD

GG G15W51

MERKUR SYSTEM PUMP 15:01 150CC WA STD

Graco G15W51 15:1 Merkur Pump, 2.4 gpm (9 lpm) fluid flow, Wall Mount

Designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications.

Proven to outperform and outlast other pumps in their class
Highest technology air motor on the market
Low air consumption for increased efficiency

Model: Merkur

Compatible Material: Waterborne, Solvent borne, High Solids, Single Components, Topcoats, Varnish, Lacquer, Acid Catalysts, Enamel, UV Coating
Fluid Inlet Size (cm): 2.54
Fluid Inlet Size (in): 1
Fluid Inlet Size (mm): 25.4
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (cm): 1.905
Fluid Outlet Size (in): 3/4
Fluid Outlet Size (mm): 19.05
Fluid Outlet Thread Type: NPT
Gun Included: 0
Gun Model: No Applicator
Gun Technology: Bare Package
Gun Type: No Applicator
Hose Inlet Diameter (cm): 0.476
Hose Inlet Diameter (in): 3/16
Hose Inlet Diameter (mm): 4.76
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (psi): 100
Maximum Flow Rate (GPM): 2.4
Maximum Flow Rate (L/min): 9.0
Maximum Working Pressure (bar): 103
Maximum Working Pressure (kPa): 10300
Maximum Working Pressure (psi): 1500
Mount Type: Wall Mount
Power Source: Air
Pressure Type: High Pressure
Product Type: Bare Package
Pump Ratio: 15:1
Pump Type: Pneumatic Piston Pump

$6,950.00

MERKUR SYSTEM, PUMP, 15:1, 25CC, CART, STD

GG G15C13

MERKUR SYSTEM, PUMP, 15:1, 25CC, CART, STD

Graco G15C13 15:1 Merkur AA Package, 0.4 gpm (1.5 lpm) flow, Cart Mount, PerformAA 15 Gun, Pump/Gun Air Controls, Gun Air/Fluid Hose, Fluid Filter, Hopper

Designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications.

Proven to outperform and outlast other pumps in their class
Highest technology air motor on the market
Low air consumption for increased efficiency

Model: Merkur

Convertible: Non-Convertible
Fluid Inlet Size (cm): 1.27
Fluid Inlet Size (in): 1/2
Fluid Inlet Size (mm): 12.7
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (cm): 0.9525
Fluid Outlet Size (in): 3/8
Fluid Outlet Size (mm): 9.525
Fluid Outlet Thread Type: NPT
Gun Included: 1
Gun Model: PerformAA 15 Air Assist
Gun Technology: Air-Assisted
Gun Type: Air-Assisted
Hose Inlet Diameter (cm): 0.4763
Hose Inlet Diameter (in): 0.1875
Hose Inlet Diameter (mm): 5
Includes: Pump and Gun Air Controls, Gun Hose, Fluid Filter, Hopper
Maximum Flow Rate (GPM): 0.4
Maximum Hose Length (ft): 25
Maximum Hose Length (m): 7.6
Maximum Working Pressure (bar): 103
Maximum Working Pressure (kPa): 10300
Maximum Working Pressure (MPa): 10.3
Maximum Working Pressure (psi): 1500
Motor Type: Pneumatic
Mount Type: Cart Mount
Number of Guns: 1
Power Source: Air
Pressure Type: High Pressure
Product Type: Spray Package
Pump Ratio: 15:1
Pump Type: Pneumatic Piston Pump

$7,250.00

MERKUR SYSTEM PUMP 15:01 25CC WALL STD

GG G15W05

MERKUR SYSTEM PUMP 15:01 25CC WALL STD

15:1 Merkur AA Package, 0.4 gpm (1.5 lpm) fluid flow, Wall Mount, PerformAA 15 Gun, Pump Air Controls, Gun Air/Fluid Hose, Suction Hose Designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications. Proven to outperform and outlast other pumps in their class Highest technology air motor on the market Low air consumption for increased efficiency External valve access allows for easy servicing and online replacement to minimize downtime

$4,980.00

MERKUR SYSTEM PUMP 15:01 50CC WA STD

GG G15W23

MERKUR SYSTEM PUMP 15:01 50CC WA STD

Graco G15W23 15:1 Merkur Pump, 0.8 gpm (3 lpm) fluid flow, Wall Mount, Pump/Gun Air Controls, Suction Hose

Designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications.

Proven to outperform and outlast other pumps in their class
Highest technology air motor on the market
Low air consumption for increased efficiency

Model: Merkur

Compatible Material: Waterborne, Solvent borne, High Solids, Single Components, Topcoats, Varnish, Lacquer, Acid Catalysts, Enamel, UV Coating
Fluid Inlet Size (cm): 1.905
Fluid Inlet Size (in): 3/4
Fluid Inlet Size (mm): 19.05
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (cm): 0.9525
Fluid Outlet Size (in): 3/8
Fluid Outlet Size (mm): 9.525
Fluid Outlet Thread Type: NPT
Gun Included: 0
Gun Model: No Applicator
Gun Technology: Bare Package
Gun Type: No Applicator
Hose Inlet Diameter (cm): 0.476
Hose Inlet Diameter (in): 3/16
Hose Inlet Diameter (mm): 4.76
Includes: Pump and Gun Air Controls, Suction Hose
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (psi): 100
Maximum Flow Rate (GPM): 0.8
Maximum Flow Rate (L/min): 3.0
Maximum Working Pressure (bar): 103
Maximum Working Pressure (kPa): 10300
Maximum Working Pressure (psi): 1500
Mount Type: Wall Mount
Power Source: Air
Pressure Type: High Pressure
Product Type: Bare Package
Pump Ratio: 15:1
Pump Type: Pneumatic Piston Pump

$5,280.00

MERKUR SYSTEM PUMP 15:01 150CC CT STD

GG G15C79

MERKUR SYSTEM PUMP 15:01 150CC CT STD

Graco G15C79 15:1 Merkur Pump, 2.4 gpm (9 lpm) fluid flow, Cart Mount, Pump Air Controls, Suction Hose, Fluid Filter

Designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications.

Proven to outperform and outlast other pumps in their class
Highest technology air motor on the market
Low air consumption for increased efficiency

Model: Merkur

Compatible Material: Waterborne, Solvent borne, High Solids, Single Components, Topcoats, Varnish, Lacquer, Acid Catalysts, Enamel, UV Coating
Fluid Inlet Size (cm): 2.54
Fluid Inlet Size (in): 1
Fluid Inlet Size (mm): 25.4
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (cm): 1.905
Fluid Outlet Size (in): 3/4
Fluid Outlet Size (mm): 19.05
Fluid Outlet Thread Type: NPT
Gun Included: 0
Gun Model: No Applicator
Gun Technology: Bare Package
Gun Type: No Applicator
Hose Inlet Diameter (cm): 0.476
Hose Inlet Diameter (in): 3/16
Hose Inlet Diameter (mm): 4.76
Includes: Pump Only Air Controls, Suction Hose, Fluid Filter
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (psi): 100
Maximum Flow Rate (GPM): 2.4
Maximum Flow Rate (L/min): 9.0
Maximum Working Pressure (bar): 103
Maximum Working Pressure (kPa): 10300
Maximum Working Pressure (psi): 1500
Mount Type: Cart Mount
Power Source: Air
Pressure Type: High Pressure
Product Type: Bare Package
Pump Ratio: 15:1
Pump Type: Pneumatic Piston Pump

$9,070.00

MERKUR SYSTEM PUMP 15:01 50CC WA STD

GG G15W19

MERKUR SYSTEM PUMP 15:01 50CC WA STD

Graco G15W19 15:1 Merkur Pump, 0.8 gpm (3 lpm) fluid flow, Wall Mount

Designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications.

Proven to outperform and outlast other pumps in their class
Highest technology air motor on the market
Low air consumption for increased efficiency

Model: Merkur

Compatible Material: Waterborne, Solvent borne, High Solids, Single Components, Topcoats, Varnish, Lacquer, Acid Catalysts, Enamel, UV Coating
Fluid Inlet Size (cm): 1.905
Fluid Inlet Size (in): 3/4
Fluid Inlet Size (mm): 19.05
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (cm): 0.9525
Fluid Outlet Size (in): 3/8
Fluid Outlet Size (mm): 9.525
Fluid Outlet Thread Type: NPT
Gun Included: 0
Gun Model: No Applicator
Gun Technology: Bare Package
Gun Type: No Applicator
Hose Inlet Diameter (cm): 0.476
Hose Inlet Diameter (in): 3/16
Hose Inlet Diameter (mm): 4.76
Includes: Pump and Gun Air Controls
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (psi): 100
Maximum Flow Rate (GPM): 0.8
Maximum Flow Rate (L/min): 3.0
Maximum Working Pressure (bar): 103
Maximum Working Pressure (kg/cm²): 105.46
Maximum Working Pressure (kPa): 10300
Maximum Working Pressure (psi): 1500
Mount Type: Wall Mount
Power Source: Air
Pressure Type: High Pressure
Product Type: Bare Package
Pump Ratio: 15:1
Pump Type: Pneumatic Piston Pump

$4,180.00

MERKUR SYSTEM PUMP 15:01 150CC WA SMT

GG G15W52

MERKUR SYSTEM PUMP 15:01 150CC WA SMT

Graco G15W52 15:1 Merkur Pump, 2.4 gpm (9 lpm) fluid flow, Wall Mount, DataTrak

Designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications.

Proven to outperform and outlast other pumps in their class
Highest technology air motor on the market
Low air consumption for increased efficiency

Model: Merkur

Compatible Material: Waterborne, Solvent borne, High Solids, Single Components, Topcoats, Varnish, Lacquer, Acid Catalysts, Enamel, UV Coating
Fluid Inlet Size (cm): 2.54
Fluid Inlet Size (in): 1
Fluid Inlet Size (mm): 25.4
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (cm): 1.905
Fluid Outlet Size (in): 3/4
Fluid Outlet Size (mm): 19.05
Fluid Outlet Thread Type: NPT
Gun Included: 0
Gun Model: No Applicator
Gun Technology: Bare Package
Gun Type: No Applicator
Hose Inlet Diameter (cm): 0.476
Hose Inlet Diameter (in): 3/16
Hose Inlet Diameter (mm): 4.76
Includes: DataTrak Monitor
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (psi): 100
Maximum Flow Rate (GPM): 2.4
Maximum Flow Rate (L/min): 9.0
Maximum Working Pressure (bar): 103
Maximum Working Pressure (kPa): 10300
Maximum Working Pressure (psi): 1500
Mount Type: Wall Mount
Power Source: Air
Pressure Type: High Pressure
Product Type: Bare Package
Pump Ratio: 15:1
Pump Type: Pneumatic Piston Pump

$8,170.00

MERKUR SYSTEM PUMP 15:1 150CC WALL, STD

GG G15W55

MERKUR SYSTEM PUMP 15:1 150CC WALL, STD

15:1 Merkur AA Package, 2.4 gpm (9 lpm) fluid flow, Wall Mount, PerformAA 15 Gun, Pump Air Controls, Gun Air/Fluid Hose, Fluid Filter Designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications. Proven to outperform and outlast other pumps in their class Highest technology air motor on the market Low air consumption for increased efficiency External valve access allows for easy servicing and online replacement to minimize downtime

$9,660.00

MERKUR SYSTEM PUMP 15:01 150CC WA STD

GG G15W53

MERKUR SYSTEM PUMP 15:01 150CC WA STD

Graco G15W53 15:1 Merkur Pump, 2.4 gpm (9 lpm) fluid flow, Wall Mount, Pump Air Controls, Suction Hose, Fluid Filter

Designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications.

Proven to outperform and outlast other pumps in their class
Highest technology air motor on the market
Low air consumption for increased efficiency

Model: Merkur

Compatible Material: Waterborne, Solvent borne, High Solids, Single Components, Topcoats, Varnish, Lacquer, Acid Catalysts, Enamel, UV Coating
Fluid Inlet Size (cm): 2.54
Fluid Inlet Size (in): 1
Fluid Inlet Size (mm): 25.4
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (cm): 1.905
Fluid Outlet Size (in): 3/4
Fluid Outlet Size (mm): 19.05
Fluid Outlet Thread Type: NPT
Gun Included: 0
Gun Model: No Applicator
Gun Technology: Bare Package
Gun Type: No Applicator
Hose Inlet Diameter (cm): 0.476
Hose Inlet Diameter (in): 3/16
Hose Inlet Diameter (mm): 4.76
Includes: Pump Only Air Controls, Suction Hose, Fluid Filter
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (psi): 100
Maximum Flow Rate (GPM): 2.4
Maximum Flow Rate (L/min): 9.0
Maximum Working Pressure (bar): 103
Maximum Working Pressure (kPa): 10300
Maximum Working Pressure (psi): 1500
Mount Type: Wall Mount
Power Source: Air
Pressure Type: High Pressure
Product Type: Bare Package
Pump Ratio: 15:1
Pump Type: Pneumatic Piston Pump

$7,410.00

MERKUR SYSTEM PUMP 18:01 125CC CT STD

GG G18C01

MERKUR SYSTEM PUMP 18:01 125CC CT STD

Graco G18C01 18:1 Merkur Pump, 2 gpm (7.5 lpm) fluid flow, Cart Mount, Pump Air Controls, Suction Hose, Fluid Filter

Designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications.

Proven to outperform and outlast other pumps in their class
Highest technology air motor on the market
Low air consumption for increased efficiency

Model: Merkur

Compatible Material: Waterborne, Solvent borne, High Solids, Single Components, Topcoats, Varnish, Lacquer, Acid Catalysts, Enamel, UV Coating
Fluid Inlet Size (cm): 2.54
Fluid Inlet Size (in): 1
Fluid Inlet Size (mm): 25.4
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (cm): 1.27
Fluid Outlet Size (in): 1/2
Fluid Outlet Size (mm): 12.7
Fluid Outlet Thread Type: NPT
Gun Included: 0
Gun Model: No Applicator
Gun Technology: Bare Package
Gun Type: No Applicator
Hose Inlet Diameter (cm): 0.476
Hose Inlet Diameter (in): 3/16
Hose Inlet Diameter (mm): 4.76
Includes: Pump Only Air Controls, Suction Hose, Fluid Filter
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (psi): 100
Maximum Flow Rate (GPM): 2
Maximum Flow Rate (L/min): 7.5
Maximum Working Pressure (bar): 124
Maximum Working Pressure (kPa): 12400
Maximum Working Pressure (psi): 1800
Mount Type: Cart Mount
Power Source: Air
Pressure Type: High Pressure
Product Type: Bare Package
Pump Ratio: 18:1
Pump Type: Pneumatic Piston Pump

$7,790.00

MERKUR SYSTEM PUMP 18:01 125CC WA STD

GG G18W03

MERKUR SYSTEM PUMP 18:01 125CC WA STD

Graco G18W03 18:1 Merkur Pump, 2 gpm (7.5 lpm) fluid flow, Wall Mount, Pump Air Controls

Designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications.

Proven to outperform and outlast other pumps in their class
Highest technology air motor on the market
Low air consumption for increased efficiency

Model: Merkur

Compatible Material: Waterborne, Solvent borne, High Solids, Single Components, Topcoats, Varnish, Lacquer, Acid Catalysts, Enamel, UV Coating
Fluid Inlet Size (cm): 2.54
Fluid Inlet Size (in): 1
Fluid Inlet Size (mm): 25.4
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (cm): 1.27
Fluid Outlet Size (in): 1/2
Fluid Outlet Size (mm): 12.7
Fluid Outlet Thread Type: NPT
Gun Included: 0
Gun Model: No Applicator
Gun Technology: Bare Package
Gun Type: No Applicator
Hose Inlet Diameter (cm): 0.476
Hose Inlet Diameter (in): 3/16
Hose Inlet Diameter (mm): 4.76
Includes: Pump Only Air Controls
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (psi): 100
Maximum Flow Rate (GPM): 2
Maximum Flow Rate (L/min): 7.5
Maximum Working Pressure (bar): 124
Maximum Working Pressure (kPa): 12400
Maximum Working Pressure (psi): 1800
Mount Type: Wall Mount
Power Source: Air
Pressure Type: High Pressure
Product Type: Bare Package
Pump Ratio: 18:1
Pump Type: Pneumatic Piston Pump

$6,410.00

MERKUR SYSTEM PUMP 18:01 125CC WA STD

GG G18W05

MERKUR SYSTEM PUMP 18:01 125CC WA STD

Graco G18W05 18:1 Merkur Pump, 2 gpm (7.5 lpm) fluid flow, Wall Mount, Pump Air Controls, Suction Hose, Fluid Filter

Designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications.

Proven to outperform and outlast other pumps in their class
Highest technology air motor on the market
Low air consumption for increased efficiency

Model: Merkur

Compatible Material: Waterborne, Solvent borne, High Solids, Single Components, Topcoats, Varnish, Lacquer, Acid Catalysts, Enamel, UV Coating
Fluid Inlet Size (cm): 2.54
Fluid Inlet Size (in): 1
Fluid Inlet Size (mm): 25.4
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (cm): 1.27
Fluid Outlet Size (in): 1/2
Fluid Outlet Size (mm): 12.7
Fluid Outlet Thread Type: NPT
Gun Included: 0
Gun Model: No Applicator
Gun Technology: Bare Package
Gun Type: No Applicator
Hose Inlet Diameter (cm): 0.476
Hose Inlet Diameter (in): 3/16
Hose Inlet Diameter (mm): 4.76
Includes: Pump Only Air Controls, Suction Hose, Fluid Filter
Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (psi): 100
Maximum Flow Rate (GPM): 2
Maximum Flow Rate (L/min): 7.5
Maximum Working Pressure (bar): 124
Maximum Working Pressure (kPa): 12400
Maximum Working Pressure (psi): 1800
Mount Type: Wall Mount
Power Source: Air
Pressure Type: High Pressure
Product Type: Bare Package
Pump Ratio: 18:1
Pump Type: Pneumatic Piston Pump

$6,210.00

MERKUR SYSTEM PUMP 18:1 125CC WALL STD

GG G18W07

MERKUR SYSTEM PUMP 18:1 125CC WALL STD

18:1 Merkur AA Package, 2 gpm (7.5 lpm) fluid flow, Wall Mount, PerformAA 50 Gun, Pump Air Controls, Gun Air/Fluid Hose, Fluid Filter Designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications. Proven to outperform and outlast other pumps in their class Highest technology air motor on the market Low air consumption for increased efficiency External valve access allows for easy servicing and online replacement to minimize downtime

$7,340.00

KIT, OUTLET, 1, XD40

GG 24R056

KIT, OUTLET, 1, XD40

$245.50

Agp Hose, Assembly, #1

GG 24R832

AGP HOSE,ASSY,#1

Graco 24R832 #1 5/8 in x 120 in Base Hose Package with 2 1/8 in x 60 in Catalyst Hoses

Hose kit #1 - Base hose plus catalyst hoses of 3 mm (1/8 in) and 3 mm (1/8 in) diameter.

$3,450.00

KIT, INLET, 1, XD, REEL

GG 24R067

KIT, INLET, 1, XD, REEL

$251.50

Kit, Lower, Ptfe, Short, San 2:1

GG 24R191

Kit, Lower, Ptfe, Short, San 2:1

$4,760.00

Kit, Software, All, Invisipack

GG 24R324

Kit, Software, All, Invisipack

$199.00

Cable, Can Power, M12 Fem, Pigtail

GG 24R735

Cable, Can Power, M12 Fem, Pigtail

$207.50

Kit, Check, Outlet, San 2:1

GG 24R181

Kit, Check, Outlet, San 2:1

$142.50

EXACTABLEND AGP SYSTEM, 100CC/100CC

GG 24R810

EXACTABLEND AGP SYSTEM, 100CC/100CC

Graco 24R810 55/5 gal (200/19 L) AGP-S100 Silicone Machine (Boom Not Included)

The Graco ExactaBlend AGP (Advanced Glazing Proportioner) provides on-ratio dispensing of two-component sealants and adhesives for curtainwall, insulating glass and other applications. The variable ratio ExactaBlend AGP offers advanced technologies at an affordable price.

Application: Precise application of silicone materials in insulating glass or structural glazing applications is critical for delivering superior adhesion, durability and leak-free performance.

Advanced pumping technology creates a better, more consistent bead – which results in reduced rework and less wasted material.

Real-time ratio assurance means less waste, more profits
Provides automatic shut-down if off-ratio conditions occur
Cuts material waste and reduces rework for a healthier bottom line
Optimal mix for quality assurance
Ultimately reduces the chance of seal failure on insulating glass
Results in better quality end product
Easy to operate
Quick and easy setup – operator simply enters the ratio setting
Easy to switch ratio settings
Optional data download provides reports on ratio, flow rate and material usage
A & B material usage
Flow rate
Alarm events
Ratio

Model: Exactablend
Series: AGP

Catalyst Inlet Size (in): 1/4
Catalyst Inlet Thread Gender: Female
Catalyst Inlet Thread Type: NPT
Maximum Working Pressure (bar): 207
Maximum Working Pressure (kPa): 20700
Maximum Working Pressure (MPa): 21
Maximum Working Pressure (psi): 3000
Minimum Flow Rate (kg/min): 1
Minimum Flow Rate (lb/min): 2.21

$52,910.00

Kit, Cycle Switch

GG 24R885

KIT,CYCLE SWITCH

Graco 24R885 Cycle Switch Kit

KIT INCLUDES: SWITCH, REED, ASSY [QTY. 1], SCREW, PAN HEAD, #8-32 X 1.5 in. [QTY. 1], WASHER, FLAT [QTY. 1]

Catalyst Inlet Size (in): 1/4
Catalyst Inlet Thread Gender: Female
Catalyst Inlet Thread Type: NPT

$310.00

Kit, Seals, Lower, Uhmw, San 2:1

GG 24R187

Kit, Seals, Lower, Uhmw, San 2:1

$323.00

REACTOR E-10 SPRAYER, HP, 230V

GG 24R900

REACTOR E-10 SPRAYER, HP, 230V

Graco 24R900 230 V Reactor E-10HP Sprayer

If you&prime, d like to add polyurea projects to your lineup, the Reactor E-10hp High Pressure Proportioner is a smart, affordable investment that can help your business grow. The Reactor E-10hp provides the high pressure power and performance you need to spray polyurea coatings. It&prime, s lightweight and portable – and runs on residential power so you don’t need to invest in a generator. With the system’s innovative boost heat and insulated tanks, material heats up fast so you’re up and running sooner. In fact, you&prime, re ready to spray in 20 minutes, compared to over an hour startup time on a standard Reactor E-10.

Application: Entry-level system for pure and hybrid polyurea coatings.

Digital heat controls
Allows you to enter the exact temperatures you need
Uses the same circuit boards as a standard Reactor
Motor
Offers 50% more power than the Reactor E-10
Provides improved spray performance with reduced pressure drop
Low Level Sensors
Indicates when material is low (1 gal/3.8 L remaining)
No contact with materials - prevents buildup
Insulated Tanks
Double-wall insulated to retain heat
Smooth interior lining for easy cleaning
Improved seal design on lid for better moisture control
Quick knockdown Lower Pumps
Easy disassembly and maintenance
Robust Hybrid Heater
More power, faster material handling means more uptime
Temperature Guages in Y-strainers
Provides accurate tank temperature readings

Model: Reactor
Series: E-10hp

Amperage (A): 15
Application: Protective Coatings
Base Inlet Size (cm): 0.635
Base Inlet Size (in): 1/4
Base Inlet Size (mm): 6.35
Catalyst Inlet Size (cm): 0.635
Catalyst Inlet Size (in): 1/4
Catalyst Inlet Size (mm): 6.35
Compatible Material: Plural Components
Frequency (Hz): 50/60
Gun Type: No Gun
Includes: Proportioner, (2) Heaters
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Working Pressure (bar): 172
Maximum Working Pressure (kPa): 17200
Maximum Working Pressure (MPa): 17.2
Maximum Working Pressure (psi): 2500
Overall Depth (cm): 91.4
Overall Depth (in): 36
Overall Depth (mm): 914
Overall Height (cm): 116.8
Overall Height (in): 46
Overall Height (mm): 1168
Overall Width (cm): 73.7
Overall Width (in): 29
Overall Width (mm): 737
Power Source: Electric
Pressure Type: Low Pressure

$30,120.00

LSR (Liquid, Silicone, Rubber) Hose, Assembly, " A", 3/4X120

GG 24R216

LSR (Liquid, Silicone, Rubber) Hose, Assembly, " A", 3/4X120

$1,630.00

Kit, Tower, Light, 30 mm , Red/Grn

GG 24R824

Kit, Tower, Light, 30 mm , Red/Grn

$765.00

KIT, PUMP 3, RESIN, LP

GG 24R968

KIT, PUMP 3, RESIN, LP

Graco 24R968 ProMix PD2K Expansion Pump, Air Spray, 70 cc, Low Pressure

Base Unit Expansion Kit to add a third or fourth pump to your system

Model: ProMix
Series: PD2K

Includes: Pump, Control Module, Solenoid, Frame, Mounting Bracket, Cables

$17,830.00

Kit, Tube, Applicator, Invisipac

GG 24R231

Kit, Tube, Applicator, Invisipac

$28.30

KIT, PUMP 3, RESIN, HP

GG 24R969

KIT, PUMP 3, RESIN, HP

Graco 24R969 ProMix PD2K Expansion Pump, Air-Assist, 70 cc, High Pressure

Base Unit Expansion Kit to add a third or fourth pump to your system

Model: ProMix
Series: PD2K

Includes: Pump, Control Module, Solenoid, Frame, Mounting Bracket, Cables

$21,680.00

Kit, Check, Inlet, San 2:1

GG 24R182

Kit, Check, Inlet, San 2:1

$177.50

KIT, PUMP 4, CATALYST, LP

GG 24R970

KIT, PUMP 4, CATALYST, LP

Graco 24R970 ProMix PD2K Expansion Pump, Air Spray, 35 cc, Low Pressure

Base Unit Expansion Kit to add a third or fourth pump to your system

Model: ProMix
Series: PD2K

Includes: Pump, Control Module, Solenoid, Frame, Mounting Bracket, Cables

$17,830.00

Kit, Transducer Press/ Harness

GG 24R099

Kit, Transducer Press/ Harness

$1,815.00

KIT, MIX-MANIFOLD, LP

GG 24R991

KIT, MIX-MANIFOLD, LP

Graco 24R991 Low Pressure Mix Manifold Kit for Mix at Belt

For at-the-gun mixing of 2 component materials when used with a ProMix PD Proportioner

Model: ProMix
Series: PD2K

For Use With: ProMix™ PD2K Proportioner
Maximum Working Pressure (bar): 21
Maximum Working Pressure (kPa): 2100
Maximum Working Pressure (MPa): 2.1
Maximum Working Pressure (psi): 300

$3,330.00

Kit, T1 Intake Valve

GG 24R989

Kit, T1 Intake Valve

$312.00

KIT, MIX-MANIFOLD, HP

GG 24R992

KIT, MIX-MANIFOLD, HP

Graco 24R992 High Pressure Mix Manifold Kit for Mix at Belt

For at-the-gun mixing of 2 component materials when used with a ProMix PD Proportioner

Model: ProMix
Series: PD2K

For Use With: ProMix™ PD2K Proportioner
Maximum Working Pressure (bar): 105
Maximum Working Pressure (kPa): 10500
Maximum Working Pressure (MPa): 10.5
Maximum Working Pressure (psi): 1500

$3,830.00

KIT, INLET, AIR-QD

GG 24S004

KIT, INLET, AIR-QD

$387.00

Kit, Rebuild, Module

GG 24T046

Kit, Rebuild, Module

$420.00

Hose, Fluid-Wb, Shielded-As

GG 24S112

Hose, Fluid-Wb, Shielded-As

$1,915.00

Kit, Hose, Lv

GG 24S006

Kit, Hose, Lv

$1,610.00

Hose, Bundle, 50', Estat

GG 24T139

Hose, Bundle, 50', Estat

$2,340.00

Hose, Bundle, 50ft, Conv, Hp

GG 24T248

Hose, Bundle, 50ft, Conv, Hp

$2,240.00

Agp Hose, Assembly, #4

GG 24T092

Agp Hose, Assembly, #4

$4,610.00

REACTOR E-10HP SPRAYER, 120V

GG 24T100

REACTOR E-10HP SPRAYER, 120V

Reactor E-10HP Sprayer, 120 V

Expand your business with polyurea applications. The Reactor E-10hp sprayer is a smart, affordable investment that will help grow your business. Even though it's an entry level system, it packs plenty of power and uses standard residential electrical outlets - no generator is needed.

Entry-level system for pure and hybrid polyurea coatings.

Digital heat controls

Allows you to enter the exact temperatures you need
Uses the same circuit boards as a standard Reactor

Motor

Offers 50% more power than the Reactor E-10
Provides improved spray performance with reduced pressure drop

Low Level Sensors

Indicates when material is low (1 gal/3.8 L remaining)
No contact with materials - prevents buildup

Boost Heat

Directs unused power from the motor circuit to additional heater rods
Additional heater power brings material to desired temperatures faster during recirculation mode

Insulated Tanks

Double-wall insulated to retain heat
Smooth interior lining for easy cleaning
Improved seal design on lid for better moisture control

Quick knockdown Lower Pumps

Easy disassembly and maintenance

Robust Hybrid Heater

More power, faster material handling means more uptime

Temperature Guages in Y-strainers

Provides accurate tank temperature readings

$30,120.00

Kit, Sleeve, Scuff, 55', Hvy Duty

GG 24T244

Kit, Sleeve, Scuff, 55', Hvy Duty

$564.00

KIT, ZONE VALVE, 24VDC NC

GG 24T296

KIT, ZONE VALVE, 24VDC NC

Graco 24T296 General Accessories - Two-Way Valve, 24 VDC, Normally Closed, Deutsch Cable, 3500 psi

Designed to custom fit lubrication systems and control when sections or zones of the system will receive lubricant
Normally Closed
DC models meet typical application requirements

Amperage (A): 0.8

Compatible Material: Grease
Inlet Size (cm): 0.635
Inlet Size (in): 1/4
Inlet Size (mm): 6.35
Inlet Thread Type: NPT
IP Rating: IP69K
Maximum NLGI Grade: #2
Outlet Size (cm): 0.635
Outlet Size (in): 1/4
Outlet Size (mm): 6.35
Outlet Thread Type: NPT
Overall Height (cm): 9.779
Overall Height (in): 3.85
Overall Height (mm): 97.79
Overall Width (cm): 5.08
Overall Width (in): 2
Overall Width (mm): 50.8
Power Connection Type: Deutsch DT Series 2 Pin
Power Rating (W): 18.2

$537.00

Kit, Lp Circ Valve

GG 24T442

KIT, LP CIRC VALVE

Graco 24T442 Low Pressure Circulating Valve for ProMix PD2K Electronic Proportioning System

$1,560.00

Kit, Lp Non-Circ Valve

GG 24T441

KIT, LP NON-CIRC VALVE

Graco 24T441 Low Pressure Non-Circulating Valve, 100 psi max air working pressure, 300 psi max fluid working pressure, Series A

$1,380.00

Kit, 3 Valve, Non-Circ, Valve

GG 24T648

KIT,3 VALVE, NON-CIRC, VALVE

Graco 24T648 3 Valve SST High Pressure Non-Circulating Valve

$5,190.00

Kit, 2 Valve, Non-Circ, Valve

GG 24T647

KIT,2 VALVE, NON-CIRC, VALVE

Graco 24T647 2 Valve SST High Pressure Non-Circulating Valve

$3,270.00

Kit, Repair, Ball

GG 24T752

KIT, REPAIR, BALL

Graco 24T752 Ball Repair Kit for ProMix PD2K Proportioner Mix Manifold

Catalyst Inlet Size (in): 1/4
Catalyst Inlet Thread Gender: Female
Catalyst Inlet Thread Type: NPT

$715.00

Kit, Transducer, Lp

GG 24T786

KIT, TRANSDUCER, LP

Graco 24T786 Fluid Outlet Pressure Sensor, for Isolated Pump Expansion Kits 24W159 and 24W160

$1,335.00

Kit, Solvent Flow Switch

GG 24T787

KIT, SOLVENT FLOW SWITCH

Graco 24T787 Solvent Flow Switch Kit

$1,545.00

Kit, Pump Assy, 35Cc, Lp

GG 24T788

KIT, PUMP ASSY, 35CC, LP

Graco 24T788 35 ccl Low Pressure Dosing Pump, 300 psi max fluid working pressure, Series A

$16,220.00

Kit, Pump Assy, 70Cc, Lp

GG 24T790

KIT, PUMP ASSY, 70CC, LP

Graco 24T790 ProMix PD2K Dosing Pump, 70cc low pressure, 300 psi Maximum Fluid Working Pressure

$16,220.00

Kit, Fluid Pump, 35Cc

GG 24T792

KIT, FLUID PUMP, 35CC

Graco 24T792 35 cc Lower for ProMix PD2K Electronic Positivie Displacement Proportioning System Dosing Pumps

$11,340.00

Kit, Fluid Pump, 70Cc

GG 24T793

KIT, FLUID PUMP, 70CC

Graco 24T793 70 cc Lower for ProMix PD2K Electronic Positive Displacement Proportioning System Dosing Pumps

$11,340.00

Kit, Rebuild, Hp Valve, Acid

GG 24T817

KIT, REBUILD, HP VALVE, ACID

Graco 24T817 Acid Valve Rebuild Kit for valve 24T785 (PEEK seat retainer)

$611.00

Kit, Tubes, Dosing Pump

GG 24T822

Kit, Tubes, Dosing Pump

$496.00

TOUGHTEK SPRAYER, MORTAR, HOPPER, FLEX APP

GG 24T834

TOUGHTEK SPRAYER, MORTAR, HOPPER, FLEX APP

Graco 24T834 ToughTek M680a Piston Pump Package, Flex Hose Applicator, Stainless Steel Hopper

The ToughTek M680a piston pump handles abrasive materials such as epoxy mortars, non-skid coatings (bridges and marine industry – solvent based coatings) or cementitious materials, and tackles difficult polymers with fillers such as glass flake, silica or sand. The all stainless design makes cleanup of epoxy mortars easy and worry-free.

Application: Portable sprayer for mortar, cementitious and heavily filled materials

Primary features:
- Flex Hose Applicator
  - Pole Applicator
    - Large Capacity Hopper
      Application: Industrial
      Compatible Material: Cementitious Material
      Fluid Inlet Thread Gender: Male
      Fluid Outlet Size (cm): 2.54
      Fluid Outlet Size (in): 1
      Fluid Outlet Size (mm): 25.4
      Fluid Outlet Thread Gender: Female
      Fluid Outlet Thread Type: NPT
      Material: Stainless Steel
      Maximum Flow Rate (GPM): 10.88
      Maximum Operating Temperature (°F): 120
      Maximum Working Pressure (bar): 70
      Maximum Working Pressure (kPa): 7000
      Maximum Working Pressure (MPa): 7
      Maximum Working Pressure (psi): 1000
      Motor Type: Pneumatic

$21,390.00

Kit, Seal, 35Cc

GG 24T840

KIT, SEAL, 35CC

Graco 24T840 35 cc Lower Pump Seal Repair Kit. Includes 24T303 Throat Seal Installation Tool

$817.00

Kit, Seal, 70Cc

GG 24T841

KIT, SEAL, 70CC

Graco 24T841 70 cc Lower Pump Seal Repair Kit for ProMix PD2K Electronic Positive Displacement Proportioning System Dosing Pumps

$817.00

Kit, Rod

GG 24T842

KIT, ROD

$488.00

Kit, Valve Restrictor, As

GG 24T304

KIT, VALVE RESTRICTOR, AS

Graco 24T304 Atomizing Air Restrictor Valve Assembly

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne

$171.00

Kit, Repair, Pump Seal

GG 277360

KIT, REPAIR, PUMP SEAL

Graco 277360 3 in. Piston Seal Repair Kit- UHMWPE

$497.00

HOSE, CPLD, 3/8"X3', 4000WPR

GG 277351

HOSE, CPLD, 3/8"X3', 4000WPR

Graco 277351 BlueMax II HP Airless Whip Hose, 3/8 in x 3 ft, 4000 psi

The BlueMax II HP Whip Hose provides more flexibility and increased operator control at the gun. This BlueMax II Whip Hose has a 3/8 inch diameter and is 3 feet long and rated for up to 4000 psi.

Lighter Weight
Over 10% lighter weight and increased hose flexibility improves under pressure
Highest Safety Standards
Conductive core meets the highest worldwide safety standards unlike competitive ground wire hose designs
Minimal Hose Coil Memory
BlueMax II Hose has superior flexibility and reduced coil memory providing ease of use during coiling and uncoiling

Model: BlueMax II
Series: Whip Hose

Connection Type: Male x Female
Hose Diameter (in): 3/8
Hose Length (cm): 91
Hose Length (ft): 3
Hose Length (in): 36
Hose Length (m): 0.9
Hose Length (mm): 912
Inside Diameter (cm): 0.9525
Inside Diameter (in): 3/8
Inside Diameter (mm): 9.525
Material: Nylon
Maximum Working Pressure (bar): 276
Maximum Working Pressure (kPa): 27600
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000

$57.25

Meter, Helical Gear w/Is Sensor

GG 280560

METER,HELICAL GEAR W/IS SENSOR

Graco 280560 HG6000 Helical Gear Fluid Flow Meter, 6000 psi (410 bar) max, 190 - 22, 700 cc/min flow range

Accuracy (%): +/- 0.25

$10,810.00

Kit, Repair, Pump Seal

GG 277362

KIT, REPAIR, PUMP SEAL

Graco 277362 3.5 in. Piston Seal Repair Kit- UHMWPE

$421.00

RAC 5 TIP, SPRAY

GG 286109

RAC 5 TIP, SPRAY

Graco 286109 RAC 5 SwitchTip, 109

The Reverse-A-Clean (RAC) 109 RAC 5 SwitchTip is designed for narrower surfaces and thinner materials. The 109 SwitchTip has a 0.009 inch orifice and produces a 2 to 4 inch fan. Reverse the SwitchTip to easily clear clogs.

Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

Model: RAC 5
Series: SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint
For Use With: RAC 5 HandTite Tip Guard
Maximum Fan Width (cm): 10.2
Maximum Fan Width (in): 2
Maximum Fan Width (mm): 102
Maximum Flow Rate (GPM): 0.09
Maximum Flow Rate (L/min): 0.34
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 2
Minimum Fan Width (mm): 51
Orifice Diameter (in): 0.009
Pattern Size (in): 2 to 4
Pattern Size (mm): 50.8 to 101.6

$62.75

RAC 5 TIP, SPRAY

GG 286121

RAC 5 TIP, SPRAY

Graco 286121 RAC 5 SwitchTip, 121

The Reverse-A-Clean (RAC) 121 RAC 5 SwitchTip is designed for narrower surfaces. The 121 SwitchTip has a 0.021 inch orifice and produces a 2 to 4 inch fan. Reverse the SwitchTip to easily clear clogs.

Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

Model: RAC 5
Series: SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint
For Use With: RAC 5 HandTite Tip Guard
Maximum Fan Width (cm): 10.2
Maximum Fan Width (in): 2
Maximum Fan Width (mm): 102
Maximum Flow Rate (GPM): 0.47
Maximum Flow Rate (L/min): 1.78
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 2
Minimum Fan Width (mm): 51
Orifice Diameter (in): 0.021
Pattern Size (in): 2 to 4
Pattern Size (mm): 50.8 to 101.6

$62.75

RAC 5 TIP, SPRAY

GG 286207

RAC 5 TIP, SPRAY

Graco 286207 RAC 5 SwitchTip, 207

The Reverse-A-Clean (RAC) 207 RAC 5 SwitchTip is designed for narrower surfaces and thinner materials. The 207 SwitchTip has a 0.007 inch orifice and produces a 4 to 6 inch fan. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.

Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Compatible Material: Clear Coating, Lacquer, Oil-Based Stain
For Use With: RAC 5 HandTite Tip Guard
Maximum Fan Width (cm): 15.2
Maximum Fan Width (in): 4
Maximum Fan Width (mm): 152
Maximum Flow Rate (GPM): 0.05
Maximum Flow Rate (L/min): 0.19
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 4
Minimum Fan Width (mm): 102
Orifice Diameter (in): 0.007

$62.75

PUMP, FTB100, 1:1, 200L DRUM, METL

GG 279037

PUMP, FTB100, 1:1, 200L DRUM, METL

Graco 279037 Fast-Ball 100 55 Gallon Drum, Universal Pump, Steel Tube

Redesigned for enhanced quality, durability and reliability, the Fast-Ball 100 air-operated piston pump is easy to install, easy to operate, and simple design allows for efficient serviceability when necessary to minimize downtime and keep your operations running.

Application:

Ideal for low-volume transfer of petroleum and synthetic-based oils with a continuous duty flow rate of up to 5 gpm (19lpm).

In-line design with fewer parts for less pump wear
Double-acting pump provides reliable fluid flow
Differential air motor ensures smooth pumping

Model: Fast-Ball
Series: 100

Air Inlet Size (in): 1/4
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Compatible Material: ATF, Gear Lube, Oil
Cycles Per Gallon: 31
Fluid Inlet Size (in): 1
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (in): 0.75
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Maximum Air Inlet Pressure (psi): 150
Maximum Continuous Cycle Rate (CPM): 170
Maximum Working Pressure (psi): 150
Power Type: Pneumatic
Pump Ratio: 1:1