GRACO INC. S10595
250 Model ISO Orifice Kit With 0.039 In, 0.99 MM, Impingement Port Size
GG 24D233
250 Model ISO Orifice Kit With 0.039 In, 0.99 MM, Impingement Port Size
Kit, Needle And Nozzle
GG 24D280
KIT,NEEDLE AND NOZZLE
Graco 24D280 Needle/Nozzle Kit for AirPro EFX LVMP Guns with 0.043 inch (1.1 mm) Nozzle
- Compatible Material: Motor Oil, Gear Oil, Automatic Transmission Fluid, Oil
Kit, Needle, Nozzle, .028, HVLP
GG 24D303
KIT,NEEDLE,NOZZLE,.028,HVLP
Graco 24D303 Needle/Nozzle Kit for AirPro EFX HiTEch Guns with 0.028 inch (0.7 mm) Nozzle
Kit, G15 Retaining Ring
GG 24D438
KIT,G15 RETAINING RING
Graco 24D438 G15 Spray Gun Retaining Ring Kit
Kit, G40 Retaining Ring
GG 24D439
KIT,G40 RETAINING RING
Graco 24D439 G40 Spray Gun Retaining Ring/ Tip Guard Kit. Includes retaining ring with guard, PTFE O-Ring, and PTFE Washer
AIRPRO GUN, PRESSURE, CONV
GG 24D472
AIRPRO GUN, PRESSURE, CONV
Graco 24D472 AirPro Air Spray Pressure Feed Gun, Conventional, 0.042 inch (1.1 mm) Nozzle, for Automotive Applications
The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.
- Even material distribution through the spray pattern for optimum coverage
- Improved transfer efficiency through reduced air consumption
- Enhanced atomization through material-specific aircaps
- Ultra-light trigger pull reduces operator muscle stress
- Ergonomic gun handle provides a comfortable grip
- Rounded control knobs for operator comfort
- Optimize spray performance with our cutting edge aircap and nozzle design
- Choose from a wide range of gun models to meet the needs of your specific application
- Model: AirPro
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPSM
- Application: Automotive
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Adhesives, Ceramics, Fast-Set, High Solids, Sealants, Solvent borne, Stains, UV Coating, Waterborne
- Feed Type: Pressure Feed
- Fluid Inlet Size (cm): 0.9525
- Fluid Inlet Size (in): 3/8
- Fluid Inlet Size (mm): 9.525
- Fluid Inlet Thread Type: NPSM
- Fluid Orifice Size (cm): 0.11
- Fluid Orifice Size (in): 0.042
- Fluid Orifice Size (mm): 1.1
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Conventional Gun
- Gun Weight (g): 410
- Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 21
- Maximum Fluid Pressure (kPa): 2100
- Maximum Fluid Pressure (MPa): 2.1
- Maximum Fluid Pressure (psi): 300
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Maximum Fluid Pressure (bar): 21
- Maximum Fluid Pressure (kPa): 2100
- Maximum Fluid Pressure (MPa): 2.1
- Maximum Fluid Pressure (psi): 300
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Product Type: Spray Gun
Applicator, Md2, 1:1, Soft, Cs
GG 24D500
APPLICATOR,MD2,1:1,SOFT,CS
Graco 24D500 MD2 Valve Applicator Kit (1:1 with Soft Seats) with Stainless Steel Chemical Connection Kit
Application: Accurately dispenses and mixes two-component sealants and adhesivesAdjustable Snuff-back Control
- Dispenses material only where you need it
Independent Air Cylinder
- Improves mean time to repair (MTTR)
Chromex Shafts
- Extends shaft life to better handle abrasive materials
Grease Isolation Chamber
- Ideal for moisture-sensitive materials
- Accessible grease fittings for easy maintenance
Adjustable Inlet Position
- Flexibility during system installation
- Minimizes dead spaces in fluid path
All-SST Wetted Section
- Maximizes material compatibility
Two Nose Options
- Customizes material mixing
Minimizes maintenance time and costs while maximizing dispense time
Designed with fewer parts and is easy to clean
Streamlines maintenance and service
Complete modular design adapts to different installation needs
No unique tools required
- Model: MD2
GL-43 INJECTOR, 3 INJECTOR MANIFOLD
GG 24E243
GL-43 INJECTOR, 3 INJECTOR MANIFOLD
GL-43 Carbon Steel Oil 3-Injector Manifold, 1/4 NPTWith its one piece design, Graco's GL-43 oil injector systems are easy to design, fast to set up and allow you to add or subtract lube points without having to redesign your lubrication system. Handles low viscosity lubricants.
Accurate, reliable lubrication for every lube point on your machine Longer lasting seal design for trouble-free performance Precision-honed components for reliable operation in challenging environments Adjustable output volume from .001–.008 in³ (0.02–0.13 cm³) to custom fit the system to meet the needs of each lube point Convenient front-mounted cycle pin indicator for quick confirmation that the injector is functioning properly Operating pressures from 750-1000 psi (52-69 bar) for optimal performance with low viscosity lubricants (#10 weight minimum) Offered both as a stand-alone injector and replacement injector for manifold systems, allowing you to custom fit the injectors to your applications
U-Cup Dura-Flo 430 CC Lower Seal and Bearing Replacement Kit
GG 24E212
U-Cup Dura-Flo 430 CC Lower Seal and Bearing Replacement Kit
GL-43 INJECTOR, REPL, CS, 1/8"OD TUBE
GG 24E245
GL-43 INJECTOR, REPL, CS, 1/8"OD TUBE
Graco 24E245 GL-43 Carbon Steel Oil Replacement Injector, 1/8 in. Outlet
With its one piece design, Graco&prime, s GL-43 oil injector systems are easy to design, fast to set up and allow you to add or subtract lube points without having to redesign your lubrication system. Handles low viscosity lubricants.
Application: Accurate, reliable lubrication for every lube point on your machine- Longer lasting seal design for trouble-free performance
- Precision-honed components for reliable operation in challenging environments
- Adjustable output volume from .001–.008 in³ (0.02–0.13 cm³) to custom fit the system to meet the needs of each lube point
- Operating pressures from 750-1000 psi (52-69 bar) for optimal performance with low viscosity lubricants (#10 weight minimum)
- Offered both as a stand-alone injector and replacement injector for manifold systems, allowing you to custom fit the injectors to your applications
- Model: GL-43
HUSKY SYSTEM, EVACUATION, GM
GG 24E166
HUSKY SYSTEM, EVACUATION, GM
Evacuation Pump Package - Husky 1050A (1 in) UL-Listed, Wall MountThe Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
Longer Diaphragm Life - Up to 5x longer diaphragm life for less maintenance and downtime Modular Air Valve - Stall-free, low pulsation operation provides smooth and rapid changeover One-Piece Center Section - Eliminates air leaks for more efficient operation Four Bolt Joint Design - Bolted design provides even sealing pressure for leak-free operation Multiple Ports - Increased number of ports for installation flexibility Optional Features - DataTrak™ (Runaway protection and tracks material usage), Pulse Output (Cycle count capability) Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation 30% more efficient than the market leader 20% increase in fluid flow compared to the Husky 1040
GL-43 INJECTOR, 4 INJECTOR MANIFOLD
GG 24E244
GL-43 INJECTOR, 4 INJECTOR MANIFOLD
Graco 24E244 GL-43 Carbon Steel Oil 4-Injector Manifold, 1/4 NPT
With its one piece design, Graco&prime, s GL-43 oil injector systems are easy to design, fast to set up and allow you to add or subtract lube points without having to redesign your lubrication system. Handles low viscosity lubricants.
Application: Accurate, reliable lubrication for every lube point on your machine- Longer lasting seal design for trouble-free performance
- Precision-honed components for reliable operation in challenging environments
- Adjustable output volume from .001–.008 in³ (0.02–0.13 cm³) to custom fit the system to meet the needs of each lube point
- Operating pressures from 750-1000 psi (52-69 bar) for optimal performance with low viscosity lubricants (#10 weight minimum)
- Offered both as a stand-alone injector and replacement injector for manifold systems, allowing you to custom fit the injectors to your applications
- Model: GL-43
- Compatible Material: Oil
- Maximum Working Pressure (bar): 68.9
- Maximum Working Pressure (kPa): 6890
- Maximum Working Pressure (psi): 1000
- Minimum Working Pressure (bar): 51.7
- Minimum Working Pressure (kPa): 5170
- Minimum Working Pressure (psi): 750
GL-43 INJECTOR, 2 INJECTOR MANIFOLD
GG 24E242
GL-43 INJECTOR, 2 INJECTOR MANIFOLD
Graco 24E242 GL-43 Carbon Steel Oil 2-Injector Manifold, 1/4 NPT
With its one piece design, Graco&prime, s GL-43 oil injector systems are easy to design, fast to set up and allow you to add or subtract lube points without having to redesign your lubrication system. Handles low viscosity lubricants.
Application: Accurate, reliable lubrication for every lube point on your machine- Longer lasting seal design for trouble-free performance
- Precision-honed components for reliable operation in challenging environments
- Adjustable output volume from .001–.008 in³ (0.02–0.13 cm³) to custom fit the system to meet the needs of each lube point
- Operating pressures from 750-1000 psi (52-69 bar) for optimal performance with low viscosity lubricants (#10 weight minimum)
- Offered both as a stand-alone injector and replacement injector for manifold systems, allowing you to custom fit the injectors to your applications
- Model: GL-43
- Compatible Material: Oil
- Maximum Working Pressure (bar): 68.9
- Maximum Working Pressure (kPa): 6890
- Maximum Working Pressure (psi): 1000
- Minimum Working Pressure (bar): 51.7
- Minimum Working Pressure (kPa): 5170
- Minimum Working Pressure (psi): 750
- Number of Injectors: 2
Kit, Seal, Pd44
GG 24E248
KIT,SEAL,SPOOL,H.V.,PD44
KIT INCLUDES: PACKING, QUAD RING [QTY. 4 ], PACKING, O-RING [QTY. 4 ], PACKING, O-RING [QTY. 6 ], SEAL, POSIPAK, .250IDX.437OD, ZAP [QTY. 2], LUBRICANT, GREASE, KRYTOX [QTY. 1]
GL-32 INJECTOR, 1 INJ MANIFOLD, SST
GG 24E391
GL-32 INJECTOR, 1 INJ MANIFOLD, SST
GL-32™ Grease Injector, 304 Stainless Steel, 1-Injector Manifold, 1/4 NPTWith its one piece design, Graco's GL-32 grease injector systems are easy to design, fast to set up and allow you to add or subtract lube points without having to redesign your lubrication system. Easily handles up to NLGI #2 grease.
Accurate, reliable lubrication for every lube point on your machine Longer lasting seal design for trouble-free performance Precision-honed components for reliable operation in challenging environments Adjustable output volume from .001–.008 in³ (0.02–0.13 cm³) to custom fit the system to meet the needs of each lube point Convenient front-mounted cycle pin indicator for quick confirmation that the injector is functioning properly Operating pressures from 1200–3500 psi (83–241 bar) for optimal performance with up to NLGI #2 grease Offered both as a stand-alone injector and replacement injector for manifold systems, allowing you to custom fit the injectors to your applications
GL-32 INJECTOR, 2 INJ MANIFOLD, SST
GG 24E392
GL-32 INJECTOR, 2 INJ MANIFOLD, SST
GL-32™ Grease Injector, 304 Stainless Steel, 2-Injector Manifold, 1/4 NPTWith its one piece design, Graco's GL-32 grease injector systems are easy to design, fast to set up and allow you to add or subtract lube points without having to redesign your lubrication system. Easily handles up to NLGI #2 grease.
Accurate, reliable lubrication for every lube point on your machine Longer lasting seal design for trouble-free performance Precision-honed components for reliable operation in challenging environments Adjustable output volume from .001–.008 in³ (0.02–0.13 cm³) to custom fit the system to meet the needs of each lube point Convenient front-mounted cycle pin indicator for quick confirmation that the injector is functioning properly Operating pressures from 1200–3500 psi (83–241 bar) for optimal performance with up to NLGI #2 grease Offered both as a stand-alone injector and replacement injector for manifold systems, allowing you to custom fit the injectors to your applications
GL-32 INJECTOR, 4 INJ MANIFOLD, SST
GG 24E394
GL-32 INJECTOR, 4 INJ MANIFOLD, SST
GL-32™ Grease Injector, 304 Stainless Steel, 4-Injector Manifold, 1/4 NPTWith its one piece design, Graco's GL-32 grease injector systems are easy to design, fast to set up and allow you to add or subtract lube points without having to redesign your lubrication system. Easily handles up to NLGI #2 grease.
Accurate, reliable lubrication for every lube point on your machine Longer lasting seal design for trouble-free performance Precision-honed components for reliable operation in challenging environments Adjustable output volume from .001–.008 in³ (0.02–0.13 cm³) to custom fit the system to meet the needs of each lube point Convenient front-mounted cycle pin indicator for quick confirmation that the injector is functioning properly Operating pressures from 1200–3500 psi (83–241 bar) for optimal performance with up to NLGI #2 grease Offered both as a stand-alone injector and replacement injector for manifold systems, allowing you to custom fit the injectors to your applications
FUSION AP GUN, WIDE, RND 00
GG 24D581
FUSION AP GUN, WIDE, RND 00
Graco 24D581 Wide Round Pattern Fusion Air-Purge Gun with 00 Mix Chamber
With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.
Application: For high output spray polyurethane foam and polyurea applications.- Easy air-blast tip cleaning reduces build-up and tip clogging.
- Long-lasting side seals means less downtime for maintenance
- Quick-release fluid housing - lets you easily change the mix chambers without tools
- Ergonomic handle
- Model: Fusion AP
- Series: Wide
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
- Fluid Orifice Size (cm): 0.074
- Fluid Orifice Size (in): 0.029
- Fluid Orifice Size (mm): 0.74
- Gun Type: Air Purge Gun
- Gun Weight (kg): 1.1
- Gun Weight (lb): 2.5
- Maximum Air Inlet Pressure (bar): 9
- Maximum Air Inlet Pressure (kPa): 900
- Maximum Air Inlet Pressure (MPa): 0.9
- Maximum Air Inlet Pressure (psi): 130
- Maximum Air Pressure (bar): 9
- Maximum Air Pressure (kPa): 900
- Maximum Air Pressure (MPa): 0.9
- Maximum Air Pressure (psi): 130
- Maximum Flow Rate @ PSI (lb/min): 50
- Maximum Fluid Pressure (bar): 245
- Maximum Fluid Pressure (kPa): 24500
- Maximum Fluid Pressure (MPa): 24.5
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature (°C): 94
- Maximum Fluid Temperature (°F): 200
- Maximum Fluid Pressure (bar): 245
- Maximum Fluid Pressure (kPa): 24500
- Maximum Fluid Pressure (MPa): 24.5
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature (°C): 94
- Maximum Fluid Temperature (°F): 200
- Minimum Air Inlet Pressure (bar): 5.6
- Minimum Air Inlet Pressure (kPa): 560
- Minimum Air Inlet Pressure (MPa): 0.56
- Minimum Air Inlet Pressure (psi): 80
- Mix Chamber: 00 (.029)
- Overall Height (cm): 20.6
- Overall Height (in): 8.1
- Overall Height (mm): 206
- Overall Length (cm): 19.1
- Overall Length (in): 7.5
- Overall Length (mm): 191
- Overall Width (cm): 8.4
- Overall Width (in): 3.3
- Overall Width (mm): 84
- Pattern Size (in): 15 in @ 24 in from target
GL-32 INJECTOR, 3 INJ MANIFOLD, SST
GG 24E393
GL-32 INJECTOR, 3 INJ MANIFOLD, SST
GL-32™ Grease Injector, 304 Stainless Steel, 3-Injector Manifold, 1/4 NPTWith its one piece design, Graco's GL-32 grease injector systems are easy to design, fast to set up and allow you to add or subtract lube points without having to redesign your lubrication system. Easily handles up to NLGI #2 grease.
Accurate, reliable lubrication for every lube point on your machine Longer lasting seal design for trouble-free performance Precision-honed components for reliable operation in challenging environments Adjustable output volume from .001–.008 in³ (0.02–0.13 cm³) to custom fit the system to meet the needs of each lube point Convenient front-mounted cycle pin indicator for quick confirmation that the injector is functioning properly Operating pressures from 1200–3500 psi (83–241 bar) for optimal performance with up to NLGI #2 grease Offered both as a stand-alone injector and replacement injector for manifold systems, allowing you to custom fit the injectors to your applications
Kit, Frnt Hd, Ext Mix, Vertical
GG 24E427
KIT,FRNT HD,EXT MIX,VERT
Graco 24E427 External Mix Vertical Front Head Kit
KIT INCLUDES: HEAD, ASM, EXT MIX, VERT [QTY. 1], KIT INCLUDES: SEAL, NEEDLE, SEAT [QTY. 6 ],
Kit, Frnt Hd, Ext Mix, Horizontal
GG 24E426
KIT,FRNT HD,EXT MIX,HORIZ
KIT INCLUDES: HEAD, ASM, EXT MIX, HORIZ [QTY. 1], KIT INCLUDES: HEAD, ASM, EXT MIX, VERT [QTY. 1],
Kit, Needle Assembly
GG 24E417
KIT,NEEDLE ASSY
Graco 24E417 Complete Needle Assembly Kit
KIT INCLUDES: NEEDLE, ASSEMBLY [QTY. 1], KIT INCLUDES: PACKING, DISK [QTY. 1], RETAINER, PACKING [QTY. 1], CLIP, RETAINER [QTY. 1], O-RING, 111, VITON EXTREME [QTY. 1], RETAINER, PACKING [QTY. 1]
- Compatible Material: Gel Coat, Polyester Resin
Kit, Needle, Assembly, 6 Pack
GG 24E436
KIT,NEEDLE,ASSY,6 PACK
Graco 24E436 6-Pack Needle Assembly Kit
KIT INCLUDES: NEEDLE, ASSEMBLY [QTY. 6 ], KIT INCLUDES: PACKING, O-RING [QTY. 6 ],
REGULATOR, FLUID, 3:1 RATIO
GG 24E472
REGULATOR, FLUID, 3:1 RATIO
3:1 Precision Flow Fluid Pressure Regulator, 30 psi (2.0 bar) max pressure, black ratio spacer Fluid regulators keep your system functioning more productively. Available with mechanical control or pneumatic control Suitable for fluids with low and high viscosities Models available with wetted parts made of stainless steel Application-oriented pressure ranges
Kit, Air Cap, Hitech
GG 24D703
KIT,AIR CAP, HITECH
Graco 24D703 Air Cap (Black), includes pin, for AirPro EFX HiTEch Guns, 0.028-0.039 inch (0.7-1.0 mm) Nozzle
Kit, Orifice Block
GG 24E505
KIT,ORIFICE BLOCK
Graco 24E505 MD2 Orifice Adapter Kit without MD2 Valve
KIT INCLUDES: HOUSING, ORIFICE, ASSY [QTY. 1], KIT, ORIFICE BLOCK PLUG [QTY. 1], LUBRICANT, GREASE [QTY. 1], TOOL, WRENCH, HEX [QTY. 1]
Kit, Motor, Air
GG 24E511
KIT, MOTOR, AIR
KIT INCLUDES: MOTOR, AIR [QTY. 1], PACKING, O-RING, PTFE [QTY. 1], FITTING, ELBOW, 1/8NPT, 3/8TUBE, BRAS [QTY. 1], PLUG, PIPE [QTY. 1], TUBE, POLYURETHANE, RND [QTY. 0.7 ]
REGULATOR, FLUID, 2:1 RATIO
GG 24E471
REGULATOR, FLUID, 2:1 RATIO
2:1 Precision Flow Fluid Pressure Regulator, 50 psi (3.4 bar) max pressure, green ratio spacer Fluid regulators keep your system functioning more productively. Available with mechanical control or pneumatic control Suitable for fluids with low and high viscosities Models available with wetted parts made of stainless steel Application-oriented pressure ranges
Blade, Cutter Assembly
GG 24E512
KIT, BLADE, CUTTER ASSY
KIT INCLUDES: BLADE, CUTTER ASSY [QTY. 1], TOOL, NUT DRIVER, 5/16 in. [QTY. 1], KIT, BLADE, CUTTER [QTY. 1], FITTING, ELBOW, 1/8NPT, 3/8TUBE, BRAS [QTY. 1], PLUG, PIPE [QTY. 1], TUBE, POLYURETHANE, RND [QTY. 0.7 ]
HUSKY PUMP, 1050P-E, SP/SP/SP/4A
GG 650013
HUSKY PUMP, 1050P-E, SP/SP/SP/4A
Husky 1050 PP Pump, Standard AC Motor, End Flange, AL Center Section, SP Seats, SP Balls & SP DiaphragmOur Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.
Durable Pump Technology
- Handles slurries and abrasives all without damage to the pump
- Gentle on shear sensitive material
Diaphragm Pump
- Runs dry
- No rotating or moving fluid seals
- Self-priming
Electric Drive
- Reduce energy consumption and operating costs
- Increase pump control
- Accurately meter fluid
Fluid Section
- Create the pump you need with multiple material offerings for manifolds, seats, balls, and diaphragms
Patent Pending Air Charged Drive
- Increase diaphragm life without compromising your fluid
- Ability to reduce pulsation on fluid outlet
- Stalls under pressure without additional switches and controls
HUSKY PUMP, 1050P-E, PP/PT/PS/5B
GG 650110
HUSKY PUMP, 1050P-E, PP/PT/PS/5B
Graco 650110 Husky 1050 PP Pump, 120V Compressor, BLDC Motor, End Flange, AL Center Section, PP Seats, PTFE Balls & PTFE/SP Diaphragm
Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.
- Durable Pump Technology
- Diaphragm Pump
- Electric Drive
- Patent Pending Air Charged Drive
- Energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
Increase diaphragm life without compromising your fluid
Ability to reduce pulsation on fluid outlet
Stalls under pressure without additional switches and controls
- Model: Husky
- Series: 1050e
- Air Inlet Size (in): 3/8
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Ball Material: PTFE
- Center Section Material: Aluminum
- Compatible Material: Antifreeze, Detergent, Gel-Coat, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Motor Oil, Grease & Oil, Used Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Oil, Water - Wastewater Treatment, Water - Wastewater Transfer, Water, Waterborne, Solvent borne, High Solids, Plural Components, CARC, Metallics, Topcoats, Stains, Varnish, Lacquer, Ceramics, Enamel, Epoxies, Ink
- Connection Type: End Flange ANSI/DIN
- Diaphragm Compatible Material: PTFE
- Diaphragm Material: PTFE/Santoprene 2-Piece
- Fluid Inlet Size (cm): 2.54
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4
- Fluid Outlet Size (cm): 2.54
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Fluid Section Material: Polypropylene
- Manifold Configuration: End Port
- Manifold O-Ring Material: PTFE
- Material: Polypropylene
- Maximum Air Pressure (bar): 5.5
- Maximum Air Pressure (kPa): 550
- Maximum Air Pressure (MPa): 0.55
- Maximum Air Pressure (psi): 80
- Maximum Amperage (A): 5.2
- Maximum Cycle Rate (CPM): 280
- Maximum Flow Rate (GPM): 42
- Maximum Flow Rate (L/min): 159
- Maximum Fluid Pressure (bar): 4.8
- Maximum Fluid Pressure (kPa): 480
- Maximum Fluid Pressure (MPa): 0.48
- Maximum Fluid Pressure (psi): 70
- Maximum Fluid Pressure (bar): 4.8
- Maximum Fluid Pressure (kPa): 4
Reduce energy consumption and operating costs
Increase pump control
Accurately meter fluid
- Patent Pending Air Charged Drive
Runs dry
No rotating or moving fluid seals
Self-priming
- Electric Drive
Handles slurries and abrasives all without damage to the pump
Gentle on shear sensitive material
- Diaphragm Pump
HUSKY PUMP, 1050P-E, BN/BN/BN/6A
GG 650307
HUSKY PUMP, 1050P-E, BN/BN/BN/6A
Graco 650307 Husky 1050 PP Pump, 240V Compressor, AC Motor, End Flange, SS Center Section, BN Seats, BN Balls & BN Diaphragm
Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.
- Durable Pump Technology
- Diaphragm Pump
- Electric Drive
- Patent Pending Air Charged Drive
- Energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
Increase diaphragm life without compromising your fluid
Ability to reduce pulsation on fluid outlet
Stalls under pressure without additional switches and controls
- Model: Husky
- Series: 1050e
- Air Inlet Size (in): 3/8
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Ball Material: Buna-N
- Center Section Material: Stainless Steel
- Compatible Material: Antifreeze, Detergent, Gel-Coat, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Motor Oil, Grease & Oil, Used Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Oil, Water - Wastewater Treatment, Water - Wastewater Transfer, Water, Waterborne, Solvent borne, High Solids, Plural Components, CARC, Metallics, Topcoats, Stains, Varnish, Lacquer, Ceramics, Enamel, Epoxies, Ink
- Connection Type: End Flange ANSI/DIN
- Diaphragm Compatible Material: Buna
- Diaphragm Material: Buna-N
- Fluid Inlet Size (cm): 2.54
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4
- Fluid Outlet Size (cm): 2.54
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Fluid Section Material: Polypropylene
- Manifold Configuration: End Port
- Material: Polypropylene
- Maximum Air Pressure (bar): 5.5
- Maximum Air Pressure (kPa): 550
- Maximum Air Pressure (MPa): 0.55
- Maximum Air Pressure (psi): 80
- Maximum Amperage (A): 5.7
- Maximum Cycle Rate (CPM): 280
- Maximum Flow Rate (GPM): 42
- Maximum Flow Rate (L/min): 159
- Maximum Fluid Pressure (bar): 4.8
- Maximum Fluid Pressure (kPa): 480
- Maximum Fluid Pressure (MPa): 0.48
- Maximum Fluid Pressure (psi): 70
- Maximum Fluid Pressure (bar): 4.8
- Maximum Fluid Pressure (kPa)
Reduce energy consumption and operating costs
Increase pump control
Accurately meter fluid
- Patent Pending Air Charged Drive
Runs dry
No rotating or moving fluid seals
Self-priming
- Electric Drive
Handles slurries and abrasives all without damage to the pump
Gentle on shear sensitive material
- Diaphragm Pump
Husky Pump, 1050F-E, S04Df2Pvptpopt
GG 650577
Husky Pump, 1050F-E, S04Df2Pvptpopt
HUSKY PUMP, 1050S-A01AS1SSPTPTPT
GG 651009
HUSKY PUMP, 1050S-A01AS1SSPTPTPT
Graco 651009 Husky 1050 SS 1 in. (25.4 mm) NPT Pump, AL Center Section, SS Seats, PTFE Balls & PTFE Diaphragm
The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
- Longer Diaphragm Life
- Modular Air Valve
- One-Piece Center Section
- Multiple Ports
- Optional Features
- Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
- 30% more efficient than the market leader
- 20% increase in fluid flow compared to the Husky 1040
DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability
- Model: Husky
- Series: 1050
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Ball Material: PTFE
- Center Section Material: Aluminum
- Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
- Connection Type: Threaded
- Diaphragm Compatible Material: PTFE
- Diaphragm Material: PTFE/EPDM 2-Piece
- Fluid Inlet Size (cm): 2.54
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 2.54
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Material: Stainless Steel
- Manifold Configuration: Center Port, End Port
- Manifold O-Ring Material: PTFE
- Material: Stainless Steel
- Maximum Air Consumption (SCFM): 67
- Maximum Air Pressure (bar): 8.6
- Maximum Air Pressure (kPa): 860
- Maximum Air Pressure (MPa): 0.86
- Maximum Air Pressure (psi): 125
- Maximum Cycle Rate (CPM): 280
- Maximum Flow Rate (GPM): 50
- Maximum Flow Rate (L/min): 189
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 860
- Maximum Fluid Pressure (MPa): 0.86
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Ma
Increased number of ports for installation flexibility
- Optional Features
Eliminates air leaks for more efficient operation
- Multiple Ports
Stall-free, low pulsation operation provides smooth and rapid changeover
- One-Piece Center Section
Up to 5x longer diaphragm life for less maintenance and downtime
- Modular Air Valve
HUSKY PUMP, 1050S-PA01AS1SSSSPTPT
GG 651000
HUSKY PUMP, 1050S-PA01AS1SSSSPTPT
Graco 651000 Husky 1050 SS 1 in. (25.4 mm) NPT Pump, AL Center Section, SS Seats, SS Balls & PTFE Diaphragm
The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
- Longer Diaphragm Life
- Modular Air Valve
- One-Piece Center Section
- Multiple Ports
- Optional Features
- Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
- 30% more efficient than the market leader
- 20% increase in fluid flow compared to the Husky 1040
DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability
- Model: Husky
- Series: 1050
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Ball Material: 316 Stainless Steel
- Center Section Material: Aluminum
- Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
- Connection Type: Threaded
- Diaphragm Compatible Material: PTFE
- Diaphragm Material: PTFE/EPDM 2-Piece
- Fluid Inlet Size (cm): 2.54
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 2.54
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Material: Stainless Steel
- Manifold Configuration: End Port, Center Port
- Manifold O-Ring Material: PTFE
- Material: Stainless Steel
- Maximum Air Consumption (SCFM): 67
- Maximum Air Pressure (bar): 8.6
- Maximum Air Pressure (kPa): 860
- Maximum Air Pressure (MPa): 0.86
- Maximum Air Pressure (psi): 125
- Maximum Cycle Rate (CPM): 280
- Maximum Flow Rate (GPM): 50
- Maximum Flow Rate (L/min): 189
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 860
- Maximum Fluid Pressure (MPa): 0.86
- Maximum Fluid Pressure (psi): 125
Increased number of ports for installation flexibility
- Optional Features
Eliminates air leaks for more efficient operation
- Multiple Ports
Stall-free, low pulsation operation provides smooth and rapid changeover
- One-Piece Center Section
Up to 5x longer diaphragm life for less maintenance and downtime
- Modular Air Valve
HUSKY PUMP, 1050S-PA01AS1SSPTPOPT
GG 651011
HUSKY PUMP, 1050S-PA01AS1SSPTPOPT
Husky 1050 SS 1 in. (25.4 mm) NPT Pump, AL Center Section, SS Seats, PTFE Balls & PO DiaphragmThe Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
Longer Diaphragm Life
- Up to 5x longer diaphragm life for less maintenance and downtime
Modular Air Valve
- Stall-free, low pulsation operation provides smooth and rapid changeover
One-Piece Center Section
- Eliminates air leaks for more efficient operation
Four Bolt Joint Design
- Bolted design provides even sealing pressure for leak-free operation
Multiple Ports
- Increased number of ports for installation flexibility
Optional Features
- DataTrak™ - Runaway protection and tracks material usage
- Pulse Output - Cycle count capability
HUSKY PUMP, 1050S-PA01AS1SSSSPOPT
GG 651005
HUSKY PUMP, 1050S-PA01AS1SSSSPOPT
Graco 651005 Husky 1050 SS 1 in. (25.4 mm) NPT Pump, AL Center Section, SS Seats, SS Balls & PO Diaphragm
The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
- Longer Diaphragm Life
- Modular Air Valve
- One-Piece Center Section
- Multiple Ports
- Optional Features
- Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
- 30% more efficient than the market leader
- 20% increase in fluid flow compared to the Husky 1040
DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability
- Model: Husky
- Series: 1050
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Ball Material: 316 Stainless Steel
- Center Section Material: Aluminum
- Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
- Connection Type: Threaded
- Diaphragm Compatible Material: PTFE
- Diaphragm Material: PTFE Overmold
- Fluid Inlet Size (cm): 2.54
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 2.54
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Material: Stainless Steel
- Manifold Configuration: End Port, Center Port
- Manifold O-Ring Material: PTFE
- Material: Stainless Steel
- Maximum Air Consumption (SCFM): 67
- Maximum Air Pressure (bar): 8.6
- Maximum Air Pressure (kPa): 860
- Maximum Air Pressure (MPa): 0.86
- Maximum Air Pressure (psi): 125
- Maximum Cycle Rate (CPM): 280
- Maximum Flow Rate (GPM): 50
- Maximum Flow Rate (L/min): 189
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 860
- Maximum Fluid Pressure (MPa): 0.86
- Maximum Fluid Pressure (psi): 125
Increased number of ports for installation flexibility
- Optional Features
Eliminates air leaks for more efficient operation
- Multiple Ports
Stall-free, low pulsation operation provides smooth and rapid changeover
- One-Piece Center Section
Up to 5x longer diaphragm life for less maintenance and downtime
- Modular Air Valve
HUSKY PUMP, 1050S-PA01AS1SPSPSPPT
GG 651015
HUSKY PUMP, 1050S-PA01AS1SPSPSPPT
Husky 1050 SS 1 in. (25.4 mm) NPT Pump, AL Center Section, SP Seats, SP Balls & SP DiaphragmThe Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
Longer Diaphragm Life
- Up to 5x longer diaphragm life for less maintenance and downtime
Modular Air Valve
- Stall-free, low pulsation operation provides smooth and rapid changeover
One-Piece Center Section
- Eliminates air leaks for more efficient operation
Four Bolt Joint Design
- Bolted design provides even sealing pressure for leak-free operation
Multiple Ports
- Increased number of ports for installation flexibility
Optional Features
- DataTrak™ - Runaway protection and tracks material usage
- Pulse Output - Cycle count capability
HUSKY PUMP, 1050S-PA01AS1FKFKFK
GG 651016
HUSKY PUMP, 1050S-PA01AS1FKFKFK
Husky 1050 SS 1 in. (25.4 mm) NPT Pump, AL Center Section, FKM Seats, FKM Balls & FKM DiaphragmThe Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
Longer Diaphragm Life
- Up to 5x longer diaphragm life for less maintenance and downtime
Modular Air Valve
- Stall-free, low pulsation operation provides smooth and rapid changeover
One-Piece Center Section
- Eliminates air leaks for more efficient operation
Four Bolt Joint Design
- Bolted design provides even sealing pressure for leak-free operation
Multiple Ports
- Increased number of ports for installation flexibility
Optional Features
- DataTrak™ - Runaway protection and tracks material usage
- Pulse Output - Cycle count capability
HUSKY PUMP, 1050S-PA01AS2SSPTPTPT
GG 651032
HUSKY PUMP, 1050S-PA01AS2SSPTPTPT
Husky 1050 SS 1 in. (25.4 mm) BSPT Pump, AL Center Section, SS Seats, PTFE Balls & PTFE DiaphragmThe Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
Longer Diaphragm Life
- Up to 5x longer diaphragm life for less maintenance and downtime
Modular Air Valve
- Stall-free, low pulsation operation provides smooth and rapid changeover
One-Piece Center Section
- Eliminates air leaks for more efficient operation
Four Bolt Joint Design
- Bolted design provides even sealing pressure for leak-free operation
Multiple Ports
- Increased number of ports for installation flexibility
Optional Features
- DataTrak™ - Runaway protection and tracks material usage
- Pulse Output - Cycle count capability
HUSKY PUMP, 1050S-PC01AS1SSSSPTPT
GG 651296
HUSKY PUMP, 1050S-PC01AS1SSSSPTPT
Graco 651296 Husky 1050 SS 1 in. (25.4 mm) NPT Pump, Conductive PP Center Section, SS Seats, SS Balls & PTFE Diaphragm
The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
- Longer Diaphragm Life
- Modular Air Valve
- One-Piece Center Section
- Multiple Ports
- Optional Features
- Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
- 30% more efficient than the market leader
- 20% increase in fluid flow compared to the Husky 1040
DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability
- Model: Husky
- Series: 1050
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Ball Material: 316 Stainless Steel
- Center Section Material: Conductive Polypropylene
- Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
- Connection Type: Threaded
- Diaphragm Compatible Material: PTFE
- Diaphragm Material: PTFE/EPDM 2-Piece
- Fluid Inlet Size (cm): 2.54
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 2.54
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Material: Stainless Steel
- Manifold Configuration: Center Port, End Port
- Manifold O-Ring Material: PTFE
- Material: Stainless Steel
- Maximum Air Consumption (SCFM): 67
- Maximum Air Pressure (bar): 8.6
- Maximum Air Pressure (kPa): 860
- Maximum Air Pressure (MPa): 0.86
- Maximum Air Pressure (psi): 125
- Maximum Cycle Rate (CPM): 280
- Maximum Flow Rate (GPM): 50
- Maximum Flow Rate (L/min): 189
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 860
- Maximum Fluid Pressure (MPa): 0.86
- Maximum Fluid Pressure (psi): 125
- Maximum Fl
Increased number of ports for installation flexibility
- Optional Features
Eliminates air leaks for more efficient operation
- Multiple Ports
Stall-free, low pulsation operation provides smooth and rapid changeover
- One-Piece Center Section
Up to 5x longer diaphragm life for less maintenance and downtime
- Modular Air Valve
HUSKY PUMP, 1050S-PC01AS1SSSSPOPT
GG 651301
HUSKY PUMP, 1050S-PC01AS1SSSSPOPT
Graco 651301 Husky 1050 SS 1 in. (25.4 mm) NPT Pump, Conductive PP Center Section, SS Seats, SS Balls & PO Diaphragm
The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
- Longer Diaphragm Life
- Modular Air Valve
- One-Piece Center Section
- Multiple Ports
- Optional Features
- Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
- 30% more efficient than the market leader
- 20% increase in fluid flow compared to the Husky 1040
DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability
- Model: Husky
- Series: 1050
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Ball Material: 316 Stainless Steel
- Center Section Material: Conductive Polypropylene
- Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
- Connection Type: Threaded
- Diaphragm Compatible Material: PTFE
- Diaphragm Material: PTFE Overmold
- Fluid Inlet Size (cm): 2.54
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 2.54
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Material: Stainless Steel
- Manifold Configuration: Center Port, End Port
- Manifold O-Ring Material: PTFE
- Material: Stainless Steel
- Maximum Air Consumption (SCFM): 67
- Maximum Air Pressure (bar): 8.6
- Maximum Air Pressure (kPa): 860
- Maximum Air Pressure (MPa): 0.86
- Maximum Air Pressure (psi): 125
- Maximum Cycle Rate (CPM): 280
- Maximum Flow Rate (GPM): 50
- Maximum Flow Rate (L/min): 189
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 860
- Maximum Fluid Pressure (MPa): 0.86
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pr
Increased number of ports for installation flexibility
- Optional Features
Eliminates air leaks for more efficient operation
- Multiple Ports
Stall-free, low pulsation operation provides smooth and rapid changeover
- One-Piece Center Section
Up to 5x longer diaphragm life for less maintenance and downtime
- Modular Air Valve
HUSKY PUMP, 1050S-PC01AS1SSPTPTPT
GG 651305
HUSKY PUMP, 1050S-PC01AS1SSPTPTPT
Graco 651305 Husky 1050 SS 1 in. (25.4 mm) NPT Pump, Conductive PP Center Section, SS Seats, PTFE Balls & PTFE Diaphragm
The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
- Longer Diaphragm Life
- Modular Air Valve
- One-Piece Center Section
- Multiple Ports
- Optional Features
- Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
- 30% more efficient than the market leader
- 20% increase in fluid flow compared to the Husky 1040
DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability
- Model: Husky
- Series: 1050
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Ball Material: PTFE
- Center Section Material: Conductive Polypropylene
- Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
- Connection Type: Threaded
- Diaphragm Compatible Material: PTFE
- Diaphragm Material: PTFE/EPDM 2-Piece
- Fluid Inlet Size (cm): 2.54
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 2.54
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Material: Stainless Steel
- Manifold Configuration: Center Port, End Port
- Manifold O-Ring Material: PTFE
- Material: Stainless Steel
- Maximum Air Consumption (SCFM): 67
- Maximum Air Pressure (bar): 8.6
- Maximum Air Pressure (kPa): 860
- Maximum Air Pressure (MPa): 0.86
- Maximum Air Pressure (psi): 125
- Maximum Cycle Rate (CPM): 280
- Maximum Flow Rate (GPM): 50
- Maximum Flow Rate (L/min): 189
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 860
- Maximum Fluid Pressure (MPa): 0.86
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure
Increased number of ports for installation flexibility
- Optional Features
Eliminates air leaks for more efficient operation
- Multiple Ports
Stall-free, low pulsation operation provides smooth and rapid changeover
- One-Piece Center Section
Up to 5x longer diaphragm life for less maintenance and downtime
- Modular Air Valve
HUSKY PUMP, 1050S-PC01AS1SSPTPOPT
GG 651307
HUSKY PUMP, 1050S-PC01AS1SSPTPOPT
Husky 1050 SS 1 in. (25.4 mm) NPT Pump, Conductive PP Center Section, SS Seats, PTFE Balls & PO DiaphragmThe Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
Longer Diaphragm Life
- Up to 5x longer diaphragm life for less maintenance and downtime
Modular Air Valve
- Stall-free, low pulsation operation provides smooth and rapid changeover
One-Piece Center Section
- Eliminates air leaks for more efficient operation
Four Bolt Joint Design
- Bolted design provides even sealing pressure for leak-free operation
Multiple Ports
- Increased number of ports for installation flexibility
Optional Features
- DataTrak™ - Runaway protection and tracks material usage
- Pulse Output - Cycle count capability
HUSKY PUMP, 1050S-PC01AS3SSPTPOPT
GG 651458
HUSKY PUMP, 1050S-PC01AS3SSPTPOPT
Graco 651458 Husky 1050 SS Air Operated Double Diaphragm Metal Pump, SS/PT/EPDM Overmolded
The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
- Longer Diaphragm Life
- Modular Air Valve
- One-Piece Center Section
- Multiple Ports
- Optional Features
- Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
- 30% more efficient than the market leader
- 20% increase in fluid flow compared to the Husky 1040
DataTrak™ - Runaway protection and tracks material usage
Pulse Output - Cycle count capability
- Model: Husky
- Series: 1050
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Ball Material: PTFE
- Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
- Connection Type: Threaded
- Diaphragm Compatible Material: PTFE
- Diaphragm Material: PTFE Overmold
- Fluid Inlet Size (cm): 2.54
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 2.54
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Material: Stainless Steel
- Manifold Configuration: End Port
- Manifold O-Ring Material: PTFE
- Material: Stainless Steel
- Maximum Air Consumption (SCFM): 67
- Maximum Air Pressure (bar): 8.6
- Maximum Air Pressure (kPa): 860
- Maximum Air Pressure (MPa): 0.86
- Maximum Air Pressure (psi): 125
- Maximum Cycle Rate (CPM): 280
- Maximum Flow Rate (GPM): 50
- Maximum Flow Rate (L/min): 189
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 860
- Maximum Fluid Pressure (MPa): 0.86
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 860
- Maximum Fluid Pressure (MPa): 0.86
- Maximum Flu
Increased number of ports for installation flexibility
- Optional Features
Eliminates air leaks for more efficient operation
- Multiple Ports
Stall-free, low pulsation operation provides smooth and rapid changeover
- One-Piece Center Section
Up to 5x longer diaphragm life for less maintenance and downtime
- Modular Air Valve
HUSKY PUMP, 1050S-PA01AS1SSPTPTSPT
GG 651502
HUSKY PUMP, 1050S-PA01AS1SSPTPTSPT
Husky 1050 SS 1 in. (25.4 mm) NPT Pump, AL Center Section, SS Seats, PTFE Balls & PTFE/SP DiaphragmThe Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
Longer Diaphragm Life
- Up to 5x longer diaphragm life for less maintenance and downtime
Modular Air Valve
- Stall-free, low pulsation operation provides smooth and rapid changeover
One-Piece Center Section
- Eliminates air leaks for more efficient operation
Four Bolt Joint Design
- Bolted design provides even sealing pressure for leak-free operation
Multiple Ports
- Increased number of ports for installation flexibility
Optional Features
- DataTrak™ - Runaway protection and tracks material usage
- Pulse Output - Cycle count capability
HUSKY PUMP, 1050S-E, SS/SS/PO/5A
GG 651895
HUSKY PUMP, 1050S-E, SS/SS/PO/5A
Graco 651895 Husky 1050 1 in. (25.4 mm) NPT SS Pump, 120V Compressor, Standard AC Motor, AL Center Section, SS Seats, SS Balls & PO Diaphragm
Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.
- Durable Pump Technology
- Diaphragm Pump
- Electric Drive
- Patent Pending Air Charged Drive
- Energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
Increase diaphragm life without compromising your fluid
Ability to reduce pulsation on fluid outlet
Stalls under pressure without additional switches and controls
- Model: Husky
- Series: 1050e
- Air Inlet Size (in): 3/8
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Ball Material: 316 Stainless Steel
- Center Section Material: Aluminum
- Compatible Material: Antifreeze, Detergent, Gel-Coat, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Motor Oil, Grease & Oil, Used Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Oil, Water - Wastewater Treatment, Water - Wastewater Transfer, Water, Waterborne, Solvent borne, High Solids, Plural Components, CARC, Metallics, Topcoats, Stains, Varnish, Lacquer, Ceramics, Enamel, Epoxies, Ink
- Connection Type: Threaded
- Diaphragm Compatible Material: PTFE
- Diaphragm Material: PTFE/EPDM Overmold
- Fluid Inlet Size (cm): 2.54
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 2.54
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Material: Stainless Steel
- Manifold Configuration: End Port
- Manifold O-Ring Material: PTFE
- Material: Stainless Steel
- Maximum Air Pressure (bar): 5.5
- Maximum Air Pressure (kPa): 550
- Maximum Air Pressure (MPa): 0.55
- Maximum Air Pressure (psi): 80
- Maximum Amperage (A): 5.7
- Maximum Cycle Rate (CPM): 280
- Maximum Flow Rate (GPM): 42
- Maximum Flow Rate (L/min): 159
- Maximum Fluid Pressure (bar): 4.8
- Maximum Fluid Pressure (kPa): 480
- Maximum
Reduce energy consumption and operating costs
Increase pump control
Accurately meter fluid
- Patent Pending Air Charged Drive
Runs dry
No rotating or moving fluid seals
Self-priming
- Electric Drive
Handles slurries and abrasives all without damage to the pump
Gentle on shear sensitive material
- Diaphragm Pump
Husky Pump, 1050S-E, Ss/Pt/Po/6A Obsolete
GG 651928
Husky Pump, 1050S-E, Ss/Pt/Po/6A
HUSKY PUMP, 3300A-PA01AA1TPACTPBN
GG 652002
HUSKY PUMP, 3300A-PA01AA1TPACTPBN
Husky 3300 (ANSI/DIN/NPT) AL Pump, AL Center Section, TPE Seats, AC Balls & TPE DiaphragmThe Husky 3300 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on the Husky pumps when compared to other diaphragm pumps.
Overall improved efficiency (up to 40% more efficient) Highest fluid flow rate in its class Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps Expanded material offering to handle endless applications Offered in ATEX configuration. Expanded material offering to handle numerous applications Flow rates up to 300 gpm (1,135 lpm) Modular stall-resistant air valve design Complete 3 inch family of diaphragm pumps available in aluminum or polypropylene center sections Heavy-duty construction Faster change over with spring loaded pilot valves
HUSKY PUMP, 3300A-PA01AA1SSPTPTPT
GG 652021
HUSKY PUMP, 3300A-PA01AA1SSPTPTPT
Graco 652021 Husky 3300 (ANSI/DIN/NPT) AL Pump, AL Center Section, SS Seats, PTFE Balls & PTFE Diaphragm
The Husky 3300 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on the Husky pumps when compared to other diaphragm pumps.
- Overall improved efficiency (up to 40% more efficient)
- Highest fluid flow rate in its class
- Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps
- Offered in ATEX configuration.
- Expanded material offering to handle numerous applications
- Flow rates up to 300 gpm (1,135 lpm)
- Modular stall-resistant air valve design
- Complete 3 inch family of diaphragm pumps available in aluminum or polypropylene center sections
- Heavy-duty construction
- Faster change over with spring loaded pilot valves
- Model: Husky
- Series: 3300
- Air Exhaust Port Size (in): 1
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 3/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Ball Material: PTFE
- Center Section Material: Aluminum
- Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
- Connection Type: Center Flange ANSI/DIN, Threaded
- Diaphragm Compatible Material: PTFE
- Diaphragm Material: PTFE/EPDM 2-Piece
- Fluid Inlet Size (cm): 7.62
- Fluid Inlet Size (in): 3
- Fluid Inlet Size (mm): 76.2
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 7.62
- Fluid Outlet Size (in): 3
- Fluid Outlet Size (mm): 76.2
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Material: Aluminum
- Manifold Configuration: Center Port
- Manifold O-Ring Material: PTFE
- Material: Aluminum
- Maximum Air Consumption (SCFM): 335
- Maximum Air Pressure (bar): 8.6
- Maximum Air Pressure (kPa): 860
- Maximum Air Pressure (MPa): 0.86
- Maximum Air Pressure (psi): 125
- Maximum Cycle Rate (CPM): 103
- Maximum Flow Rate (GPM): 300
- Maximum Flow Rate (L/min): 1136
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 860
- Maximum Fluid Pressure (MPa): 0.86
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 860
- Maximum Fluid Pressure (MPa): 0.86
- Maximum Fluid Pressure (psi): 125
- Maximum Operating Temperature (°C): 82
- Maximum Operating Temperature (°F): 180
- Maximum Solid Size (cm): 1.27
- Maximum Solid Size (in): 0.5
- Maximum Solid Size (mm): 12.7
- Minimum Operating Temperature (°C): 0
- Minimum Operating Tempe
HUSKY PUMP, 3300A-PA01EA1GEGEGEBN
GG 652183
HUSKY PUMP, 3300A-PA01EA1GEGEGEBN
Husky 3300 (ANSI/DIN/NPT) AL Pump, AL Center Section, GE Seats, GE Balls & GE DiaphragmThe Husky 3300 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on the Husky pumps when compared to other diaphragm pumps.
Overall improved efficiency (up to 40% more efficient) Highest fluid flow rate in its class Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps Expanded material offering to handle endless applications Offered in ATEX configuration. Expanded material offering to handle numerous applications Flow rates up to 300 gpm (1,135 lpm) Modular stall-resistant air valve design Complete 3 inch family of diaphragm pumps available in aluminum or polypropylene center sections Heavy-duty construction Faster change over with spring loaded pilot valves
HUSKY PUMP, 3300P, PP/PT/PT/PT
GG 652404
HUSKY PUMP, 3300P, PP/PT/PT/PT
Graco 652404 Husky 3300 PP Pump, PP Center Section, PP Seats, PTFE Balls & PTFE Diaphragm
The Husky 3300 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on the Husky pumps when compared to other diaphragm pumps.
- Overall improved efficiency (up to 40% more efficient)
- Highest fluid flow rate in its class
- Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps
- Offered in ATEX configuration.
- Expanded material offering to handle numerous applications
- Flow rates up to 300 gpm (1,135 lpm)
- Modular stall-resistant air valve design
- Complete 3 inch family of diaphragm pumps available in aluminum or polypropylene center sections
- Heavy-duty construction
- Faster change over with spring loaded pilot valves
- Model: Husky
- Series: 3300
- Air Exhaust Port Size (in): 1
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 3/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Ball Material: PTFE
- Center Section Material: Polypropylene
- Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
- Connection Type: Center Flange ANSI/DIN
- Diaphragm Compatible Material: PTFE
- Diaphragm Material: PTFE/EPDM 2-Piece
- Fluid Inlet Size (cm): 7.62
- Fluid Inlet Size (in): 3
- Fluid Inlet Size (mm): 76.2
- Fluid Outlet Size (cm): 7.62
- Fluid Outlet Size (in): 3
- Fluid Outlet Size (mm): 76.2
- Fluid Section Material: Polypropylene
- Manifold Configuration: Center Port
- Manifold O-Ring Material: PTFE
- Material: Polypropylene
- Maximum Air Consumption (SCFM): 275
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Cycle Rate (CPM): 103
- Maximum Flow Rate (GPM): 280
- Maximum Flow Rate (L/min): 1060
- Maximum Fluid Pressure (bar): 6.9
- Maximum Fluid Pressure (kPa): 690
- Maximum Fluid Pressure (MPa): 0.7
- Maximum Fluid Pressure (psi): 100
- Maximum Fluid Pressure (bar): 6.9
- Maximum Fluid Pressure (kPa): 690
- Maximum Fluid Pressure (MPa): 0.7
- Maximum Fluid Pressure (psi): 100
- Maximum Operating Temperature (°C): 66
- Maximum Operating Temperature (°F): 150
- Maximum Solid Size (cm): 1.27
- Maximum Solid Size (in): 0.5
- Maximum Solid Size (mm): 12.7
- Minimum Operating Temperature (°C): 0
- Minimum Operating Temperature (°F): 32
- Minimum Storage Temperature (°C): 0
- Minimum Storage Temperature (°F): 32
- Overall Height (in):
HUSKY PUMP, 3300P, SP/SP/SP/PT
GG 652423
HUSKY PUMP, 3300P, SP/SP/SP/PT
Husky 3300 PP Pump, PP Center Section, SP Seats, SP Balls & SP DiaphragmThe Husky 3300 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on the Husky pumps when compared to other diaphragm pumps.
Overall improved efficiency (up to 40% more efficient) Highest fluid flow rate in its class Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps Expanded material offering to handle endless applications Offered in ATEX configuration. Expanded material offering to handle numerous applications Flow rates up to 300 gpm (1,135 lpm) Modular stall-resistant air valve design Complete 3 inch family of diaphragm pumps available in aluminum or polypropylene center sections Heavy-duty construction Faster change over with spring loaded pilot valves
HUSKY PUMP, 3300A-PA01AA1SPSPSPBN
GG 652036
HUSKY PUMP, 3300A-PA01AA1SPSPSPBN
Graco 652036 Husky 3300 (ANSI/DIN/NPT) Al Pump, AL Center Section with BN Seals, SP Seats, SP Balls & SP Diaphragm
The Husky 3300 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on the Husky pumps when compared to other diaphragm pumps.
- Overall improved efficiency (up to 40% more efficient)
- Highest fluid flow rate in its class
- Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps
- Offered in ATEX configuration.
- Expanded material offering to handle numerous applications
- Flow rates up to 300 gpm (1,135 lpm)
- Modular stall-resistant air valve design
- Complete 3 inch family of diaphragm pumps available in aluminum or polypropylene center sections
- Heavy-duty construction
- Faster change over with spring loaded pilot valves
- Model: Husky
- Series: 3300
- Air Exhaust Port Size (in): 1
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 3/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Ball Material: Santoprene
- Center Section Material: Aluminum
- Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
- Connection Type: Center Flange ANSI/DIN, Threaded
- Diaphragm Compatible Material: Santoprene
- Diaphragm Material: Santoprene
- Fluid Inlet Size (cm): 7.62
- Fluid Inlet Size (in): 3
- Fluid Inlet Size (mm): 76.2
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 7.62
- Fluid Outlet Size (in): 3
- Fluid Outlet Size (mm): 76.2
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Material: Aluminum
- Manifold Configuration: Center Port
- Manifold O-Ring Material: Buna-N
- Material: Aluminum
- Maximum Air Consumption (SCFM): 335
- Maximum Air Pressure (bar): 8.6
- Maximum Air Pressure (kPa): 860
- Maximum Air Pressure (MPa): 0.86
- Maximum Air Pressure (psi): 125
- Maximum Cycle Rate (CPM): 103
- Maximum Flow Rate (GPM): 300
- Maximum Flow Rate (L/min): 1136
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 860
- Maximum Fluid Pressure (MPa): 0.86
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 860
- Maximum Fluid Pressure (MPa): 0.86
- Maximum Fluid Pressure (psi): 125
- Maximum Operating Temperature (°C): 82
- Maximum Operating Temperature (°F): 180
- Maximum Solid Size (cm): 1.27
- Maximum Solid Size (in): 0.5
- Maximum Solid Size (mm): 12.7
- Minimum Operating Temperature (°C): 0
- Minimu
HUSKY PUMP, 3300P, PP/SP/SP/PT
GG 652400
HUSKY PUMP, 3300P, PP/SP/SP/PT
Husky 3300 PP Pump, PP Center Section, PP Seats, SP Balls & SP DiaphragmThe Husky 3300 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on the Husky pumps when compared to other diaphragm pumps.
Overall improved efficiency (up to 40% more efficient) Highest fluid flow rate in its class Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps Expanded material offering to handle endless applications Offered in ATEX configuration. Expanded material offering to handle numerous applications Flow rates up to 300 gpm (1,135 lpm) Modular stall-resistant air valve design Complete 3 inch family of diaphragm pumps available in aluminum or polypropylene center sections Heavy-duty construction Faster change over with spring loaded pilot valves