GRACO INC. S10595
GRACO INC. S10595 branded products
Kit, Check Valve, 2Ks
GG 16D658
GG 16D658
KIT,CHECK VALVE,2KS
Graco 16D658 Check Valve for ProMix 2KS, 3KS and 2KE Proportioners
- Chop Gun Type: With Cutter
- Compatible Material: Polyester Resin, Gel-Coat
$225.00
Kit, Repair, Packing, 695/795
GG 248212
GG 248212
Kit, Repair, Packing, 695/795
Pump Packing Repair Kit Replace a worn or damaged pump with genuine Graco parts. Refer to the parts manual for your sprayer to ensure part compatibility Graco’s dedication to delivering the highest quality products also allows you to protect your investment by offering products that can be repaired to ensure years of reliable service. High quality parts have years of service, but wear parts will need replacement over time. Use Genuine Graco parts to keep your sprayer in peak working order for years to come. Graco Tech Support can further assist with troubleshooting sprayer operation
$137.50
Kit, Repair, Vee, 50Cc
GG 24A252
GG 24A252
KIT, REPAIR,VEE, 50CC
Graco 24A252 Standard Seal Repair Kit for Merkur LW050A
$241.00
Datatrak Upgrade, 1200/1800Cc Air Motor
GG 24A576
GG 24A576
Datatrak Upgrade, 1200/1800Cc Air Motor
$1,650.00
Kit, Needle And Nozzle, .042
GG 24A688
GG 24A688
KIT, NEEDLE AND NOZZLE, .042
Graco 24A688 Needle/Nozzle Kit for AirPro Automatic Guns with 0.042 inch (1.1 mm) Nozzle, General Metal
$139.50
Kit, Seat, Sst, Dose Valve
GG 24A861
GG 24A861
KIT, SEAT, SST, DOSE VALVE
Graco 24A861 Stainless Steel Dispense Valve Seat Kits for ProMix 2KS Proportioners
$76.75
AIRPRO GUN, ASSY, EFX, LVMP, .043 Obsolete
GG 24B872
GG 24B872
AIRPRO GUN, ASSY, EFX, LVMP, .043
Graco 24B872 AirPro EFX Auto Air Spray Gun with Manifold, LVMP, 0.043 inch (1.1 mm) Nozzle, SST Tip, Ultra Precision Fluid Adjust Knob
The AirPro EFX air spray automatic guns are among the lightest and most compact guns in their class. With no internal air shutoff mechanism, the AirPro EFX delivers increased reliability and precision fluid flow. The modest size and weight of this gun make it an excellent choice for fixed, reciprocating and robotic applications.
- Aircaps and nozzles deliver superior, precision spray performance
- Precision fluid adjustment with a micrometer-telescoping knob
- High wear components designed for abrasive materials
- Model: AirPro
- Series: EFX
- Applicator Type: Automatic
- Bleed Type: Bleeder
- Body Material: Plastic
- Compatible Material: Ceramics, Enamel, Fast-Set, High Solids, Solvent borne, Waterborne
- Component Type: Single Component
- Feed Type: Pressure Feed
- Fluid Adjustment Knob: Ultra Precision
- Fluid Orifice Size (cm): 0.11
- Fluid Orifice Size (in): 0.043
- Fluid Orifice Size (mm): 1.1
- Gun Activation: Automatic
- Gun Type: LVMP Gun
- Gun Weight (kg): 0.59
- Gun Weight (lb): 1.3
- Includes: Air Cap with Pin, Fluid Adjustment Knob, Manifold, Needle/Nozzle Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Flow Rate @ PSI (oz/min): 8.5
- Maximum Fluid Pressure (bar): 7
- Maximum Fluid Pressure (kPa): 700
- Maximum Fluid Pressure (MPa): 0.7
- Maximum Fluid Pressure (psi): 100
- Maximum Fluid Temperature (°C): 49
- Maximum Fluid Temperature (°F): 120
- Maximum Fluid Pressure (bar): 7
- Maximum Fluid Pressure (kPa): 700
- Maximum Fluid Pressure (MPa): 0.7
- Maximum Fluid Pressure (psi): 100
- Maximum Fluid Temperature (°C): 49
- Maximum Fluid Temperature (°F): 120
- Minimum Flow Rate @ PSI (oz/min): 0.8
- Needle Tip Material: Stainless Steel
- Overall Height (cm): 2.6
- Overall Height (in): 1
- Overall Height (mm): 25
- Overall Length (cm): 12
- Overall Length (in): 4.9
- Overall Length (mm): 124
- Overall Width (cm): 3.8
- Overall Width (in): 1
- Overall Width (mm): 25
- Purge Method: Air
$2,760.00
Kit, Repair
GG 24C135
GG 24C135
KIT, REPAIR
Graco 24C135 Standard Pump Repair Kit with Nylon Piston Seal, for 400 Series Glutton Pumps
$529.00
Kit, Power Supply, 40Kv
GG 24N659
GG 24N659
KIT, POWER SUPPLY, 40KV
Graco 24N659 40 kV Gun Power Supply Kit
- Coating Type: Abrasive, Metallic, High Conductivity, High Wear
- Compatible Paint Type: Automotive, Base Coat, Clear Coat, Enamels, High Solids, Metallics, Plural Component Materials, Primers, Solventborne, Urethanes
$2,050.00
Manifold, Kit, Base (Replaces SA914001)
GG 24P867
GG 24P867
Manifold, Kit, Base (Replaces SA914001)
$375.00
Kit, Seal, 35Cc
GG 24T840
GG 24T840
KIT, SEAL, 35CC
Graco 24T840 35 cc Lower Pump Seal Repair Kit. Includes 24T303 Throat Seal Installation Tool
$817.00
Kit, Seal, 70Cc
GG 24T841
GG 24T841
KIT, SEAL, 70CC
Graco 24T841 70 cc Lower Pump Seal Repair Kit for ProMix PD2K Electronic Positive Displacement Proportioning System Dosing Pumps
$817.00
Meter, Helical Gear w/Is Sensor
GG 280560
GG 280560
METER,HELICAL GEAR W/IS SENSOR
Graco 280560 HG6000 Helical Gear Fluid Flow Meter, 6000 psi (410 bar) max, 190 - 22, 700 cc/min flow range
- Accuracy (%): +/- 0.25
$10,810.00
Kit, Seal, Nose, Glc, Valve
GG 255219
GG 255219
KIT, SEAL,NOSE,GLC,VALVE
KIT INCLUDES: O-RING, [QTY. 2], SEAL, POSIPAK [QTY. 2], NEEDLE, SNUFFBACK [QTY. 2], SEAT, NEEDLE [QTY. 2]
$340.00
Kit, Piston, L100Cs/L100Cm
GG 255551
GG 255551
KIT, PISTON, L100CS/L100CM
KIT INCLUDES: PACKING, O-RING, PTFE [QTY. 2], BEARING, PISTON GUIDE CM100 [QTY. 1], SEAT, PISTON (4.5 CM) [QTY. 1], SEAT, PISTON [QTY. 1], SEAL, PISTON (4.5 CM) [QTY. 1], SEAL, [QTY. 1]
$503.00
Kit, Seal, Neoprene, 55 Gl
GG 255652
GG 255652
KIT, SEAL, NEOPRENE, 55 GL
KIT INCLUDES: SEAL, DRUM WIPER 55GAL NEOPRENE [QTY. 2], KIT INCLUDES: SEAL, DRUM WIPER 55 GALLON [QTY. 2],
$585.00
RS GUN, ASM, INT MIX, GEL
GG 258853
GG 258853
RS GUN, ASM, INT MIX, GEL
RS Internal Mix Gel Coat Gun with TipInnovations engineered into the Graco RS Gel Coat Gun are sure to make a difference in your production uptime. It's lightweight, ergonomic, designed for tool-less operation and fast, easy maintenance as well. It’s available in internal and external mixing gelcoat spray guns. Discover how the Graco RS Resin Spray Gun’s revolutionary design and industry-first features can help boost your company’s bottom line.
Makes production easier
- Simple, quick start up and shut down
- Quick tool-less blade change
- No need to adjust needle settings after maintenance
Improves product quality
- Lightweight cutter gives better chopping control
- Easy one-hand cutter speed control
- Superior spray pattern
Improves operator comfort for increased job satisfaction
- Lighter, ergonomic gun reduces fatigue
- Lets you quickly adjust anvil tension to correct cut variations due to anvil and blade wear
- No problems soaking the RS Gun in solvents overnight
Saves material costs
- Air Assist Containment (AAC®) standard on all RS Guns
- Lower pressure reduces overspray
$3,030.00
REGULATOR, BP, AIRPILOT, LOW-FLOW
GG 25R487
GG 25R487
REGULATOR, BP, AIRPILOT, LOW-FLOW
Graco 25R487 Low Shear Fluid Back Pressure Regulator, 300 Max psi, 10 gpm Max flow rate, SST, Pneumatic, high wear, sanitary inlet/outlet
Graco’s low shear back pressure regulator (BPR) minimizes shear and prevents paint degradation so that manufacturers produce consistent finish quality.
- Air operated model works with Intelligent Paint Kitchen (IPK) control to reduce energy consumption and paint shear
- Ultralife series ceramic coated parts resist wear and increase service life
- Low profile, compact design and backwards compatibility mean easy installation and replacement
- Compatible Material: Waterborne, Solvent borne
- Gauge Port Size (cm): 0.635
- Gauge Port Size (in): 1/4
- Gauge Port Size (mm): 6.35
- Gauge Port Type: NPT
- Inlet Size (cm): 3.8
- Inlet Size (in): 1.5
- Inlet Size (mm): 38
- Inlet Thread Type: Sanitary Flange
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kg/cm²): 7
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Flow Rate (GPM): 10
- Maximum Flow Rate (L/min): 38
- Maximum Operating Temperature (°C): 50
- Maximum Operating Temperature (°F): 122
- Maximum Regulated Pressure (bar): 17.6
- Maximum Regulated Pressure (kg/cm²): 17.6
- Maximum Regulated Pressure (kPa): 1724
- Maximum Regulated Pressure (psi): 250
- Maximum Viscosity (cP): 1000
- Maximum Working Pressure (bar): 21.1
- Maximum Working Pressure (kg/cm²): 21.1
- Maximum Working Pressure (kPa): 2068
- Maximum Working Pressure (psi): 300
- Minimum Operating Temperature (°C): 0
- Minimum Operating Temperature (°F): 32
- Minimum Regulated Pressure (bar): 1.8
- Minimum Regulated Pressure (kg/cm²): 1.8
- Minimum Regulated Pressure (kPa): 172
- Minimum Regulated Pressure (MPa): 0.17
- Minimum Regulated Pressure (psi): 25
- Outlet Size (cm): 3.8
- Outlet Size (in): 1.5
- Outlet Size (mm): 38
- Outlet Thread Type: Sanitary Flange
$2,270.00
VALVE, DMV
GG 25T670
GG 25T670
VALVE, DMV
Voltex Two-Component Dynamic Mix Valve The Voltex Dynamic Mix Valve is a rotary static valve that consistently mixes and dispenses materials requiring exceptional mixing energy. Engineered with rugged components and precision controls that eliminate dispensing inconsistencies, reduce maintenance downtime, and optimize material usage. Reliably mixes and dispenses difficult foaming polyurethanes, low viscosity silicones, and other hard to blend two component chemistries. Easily integrates with Graco meter, mix, and dispense systems like the PR70 for a complete dispensing solution. Control system delivers precision RPM control, and real time monitoring for dispensing process stability. Built with durable check valves and disposable mixers that reduce maintenance and downtime.
$12,620.00
VOLTEX CONTROL, WALL MOUNT, DMV, ADM
GG 25T673
GG 25T673
VOLTEX CONTROL, WALL MOUNT, DMV, ADM
Voltex Wall Mount Control Box for PR70 with ADM Use Voltex wall mounted control box to complete your dynamic mixing system. Easily integrates with the PR70 or HFR for a total dispensing solution. Control box equipped with the ADM easily integrates with the PR70 or HFR. Stable, strong wall mount base with a small footprint for work space optimization. Contains all electronic components necessary for running the precision servo motor of the Voltex dynamic mix valve.
$7,140.00
Module, G-Barrier, Power Supply
GG 26C724
GG 26C724
MODULE,G-BARRIER, POWER SUPPLY
- Compatible Material: Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC
$5,060.00
ULTRA-LITE 4000 GUN, FLOW, SEVERE DUTY
GG 237607
GG 237607
ULTRA-LITE 4000 GUN, FLOW, SEVERE DUTY
Graco 237607 Ultra-Lite 4000 Severe Duty Flow Gun
The operator-friendly Ultra-Lite 4000 combines ergonomic design with high-operating pressure for dispensing low-to-medium viscosity industrial and automotive sealants and adhesives.
Application: For precise control of low-to-medium viscosity materials
- Operating pressures to 4000 psi (276 bar, 27.6 MPa).
- 150° head/handle angle is more comfortable for operator
- Changeable tips for a variety of dispensing needs
- Model: Ultra-Lite
- Series: 4000
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation
- Connection Type: Threaded, Flange
- Gun Activation: Manual
- Inlet Size (in): 1/4
- Inlet Thread Gender: Female
- Inlet Thread Type: NPT
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kg/cm²): 281
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (MPa): 28
- Maximum Working Pressure (psi): 4000
- Nozzle Size (cm): 0.508
- Nozzle Size (in): 0.2
- Nozzle Size (mm): 5.08
- Number of Outputs: 1
$1,310.00
Kit, Replmnt, Bearing, Hd Agit
GG 238251
GG 238251
KIT, REPLMNT, BEARING, HD AGIT
Graco 238251 Bearing Replacement Kit
$333.00
GUARD, RAC IV
GG 237859
GG 237859
GUARD, RAC IV
Spray Tip Guard The Spray Tip Guard helps to eliminate paint build-up, dripping and spitting. It also helps to provide safer spraying at higher pressures. Its finger grip design makes it easy to attach or remove without the need for tools.
$43.50
Tube, Static Mixer Element Housing
GG 15D430
GG 15D430
TUBE, MIXER
Graco 15D430 Static Mixing Tube for Fluid Mix Manifold
$381.00
FUSION AP GUN, ROUND 000
GG 246099
GG 246099
FUSION AP GUN, ROUND 000
Graco 246099 Round Fusion Air-Purge Gun with 000 Mix Chamber and 0.020 in (0.51 mm) Orifice Size
With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.
Application: For high output spray polyurethane foam and polyurea applications.- Easy air-blast tip cleaning reduces build-up and tip clogging.
- Long-lasting side seals means less downtime for maintenance
- Quick-release fluid housing - lets you easily change the mix chambers without tools
- Ergonomic handle
- Model: Fusion AP
- Series: Round
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
- Fluid Orifice Size (cm): 0.051
- Fluid Orifice Size (in): 0.020
- Fluid Orifice Size (mm): 0.51
- Gun Type: Air Purge Gun
- Gun Weight (g): 1130
- Gun Weight (kg): 1.1
- Gun Weight (lb): 2.5
- Gun Weight (oz): 40
- Impingement Port Size (in): 0.020
- Impingement Port Size (mm): 0.50
- Maximum Air Inlet Pressure (bar): 9
- Maximum Air Inlet Pressure (kPa): 900
- Maximum Air Inlet Pressure (MPa): 0.9
- Maximum Air Inlet Pressure (psi): 130
- Maximum Air Pressure (bar): 9
- Maximum Air Pressure (kPa): 900
- Maximum Air Pressure (MPa): 0.9
- Maximum Air Pressure (psi): 130
- Maximum Flow Rate @ PSI (lb/min): 50
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature (°C): 93
- Maximum Fluid Temperature (°F): 200
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature (°C): 93
- Maximum Fluid Temperature (°F): 200
- Minimum Air Inlet Pressure (bar): 5.5
- Minimum Air Inlet Pressure (kPa): 550
- Minimum Air Inlet Pressure (MPa): 0.55
- Minimum Air Inlet Pressure (psi): 80
- Mix Chamber: 000 (.020)
- Overall Height (cm): 20.6
- Overall Height (in): 8.1
- Overall Height (mm): 206
- Overall Length (cm): 19.1
- Overall Length (in): 7.5
- Overall Length (mm): 191
- Overall Width (cm): 8.4
- Overall Width (in): 3.3
- Overall Width (mm): 84
- Pattern Size (in): 5 in @ 24 in from target
$3,680.00
REGULATOR, MASTIC
GG 246642
GG 246642
REGULATOR, MASTIC
Graco 246642 Air Operated Mastic Fluid Pressure Regulator
The mastic regulator is ideal for low to high viscosity sealants or adhesives
Application: These regulators control downstream pressure for mastic or semi-solid material. Install a regulator ahead of each spray gun or extruder gun in a multiple outlet system. The regulator provides precise pressure control to each spray gun from a common header system. It also dampens flow surges when line valves are opened and during pump stroke changeover.- Actuation Type: Air
- Flow Control Type: Regulation
- Gauge Port Size (cm): 1.905
- Gauge Port Size (in): 3/4
- Gauge Port Size (mm): 19.05
- Gauge Port Type: NPT
- Inlet Size (cm): 1.905
- Inlet Size (in): 3/4
- Inlet Size (mm): 19.05
- Inlet Thread Type: NPT
- Maximum Regulated Pressure (bar): 310
- Maximum Regulated Pressure (kPa): 31000
- Maximum Regulated Pressure (MPa): 31.0
- Maximum Regulated Pressure (psi): 4500
- Maximum Viscosity (cP): 80000
- Maximum Working Pressure (bar): 344
- Maximum Working Pressure (kPa): 34400
- Maximum Working Pressure (MPa): 34.4
- Maximum Working Pressure (psi): 5000
- Minimum Regulated Pressure (bar): 7
- Minimum Regulated Pressure (kPa): 700
- Minimum Regulated Pressure (MPa): 0.7
- Minimum Regulated Pressure (psi): 100
- Outlet Size (cm): 1.905
- Outlet Size (in): 3/4
- Outlet Size (mm): 19.05
- Outlet Thread Type: NPT
$3,050.00
METER, HELI GEAR, HI RESOLUTION
GG 246652
GG 246652
METER, HELI GEAR, HI RESOLUTION
High Resolution Helical Gear Flow Meter The High Resolution Helical Gear Flow Meter is used for precise and accurate flow rate measurements of a variety of materials. Positive displacement, helical gear flow meter Designed to detect a wide range of flow rates Highly accurate, even with low flow rates Stainless steel, water-base compatible for medium to high viscosity materials CE-marked for easy integration
$10,220.00
DURAFLEX HOSE, COUPLED, 50', PKGD W/CONN
GG 247340
GG 247340
DURAFLEX HOSE, COUPLED, 50', PKGD W/CONN
DuraFlex Hose 1/4 in x 50 ft Use with any Graco Magnum airless paint sprayer. Link multiple airless hose together for additional reach. Consult sprayer manual for maximum hose length supported Graco DuraFlex Airless Paint Hose with its superior flexibility and durability is designed for ease of use while spraying under pressure. Minimal hose coil memory reduces tangling and kinks when uncoiling or coiling or moving the hose around the project. Conductive core meets the highest safety standards. Hose measures 50 ft. by 1/4 in. Maximum working pressure is 3000 psi Zinc-plated spring guards are corrosion resistant For use with Magnum or Graco Airless Paint Sprayers Consult sprayer manual for maximum hose length supported Includes 1/4 in. x 1/4 in. connector
$95.50
FUSION MP GUN, MR3535, RTM040
GG 247212
GG 247212
FUSION MP GUN, MR3535, RTM040
Graco 247212 Round Pattern Fusion Mechanical Purge Gun with 0.040 in (1.0 mm) Orifice Size and Mix Chamber with 0.035 in (0.89 mm) Impingement Port
Whether you&prime, re spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.
Application: For high output spray polyurethane foam and polyurea applications.- Easy mechanical cleaning – mix modules and tips are cleaned with a drill bit
- Long-lasting PolyCarballoy mix module
- Advanced mix module and tip provides superior mixing capabilities
- Model: Fusion MP
- Series: Round
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPT
- Compatible Material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam
- Component A Inlet Size (cm): 1.27
- Component A Inlet Size (in): 1/2-20
- Component A Inlet Size (mm): 12.7
- Component A Inlet Thread Type: UNF
- Component B Inlet Size (cm): 1.42875
- Component B Inlet Size (in): 9/16-18
- Component B Inlet Size (mm): 14.2875
- Component B Inlet Thread Type: UNF
- Component Type: Plural-Component
- Fluid Orifice Size (cm): 0.102
- Fluid Orifice Size (in): 0.040
- Fluid Orifice Size (mm): 1.02
- For Use With: Non-Flammable Foam and Polyurea
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Mechanical-Purge
- Gun Weight (g): 1315
- Gun Weight (kg): 1.32
- Gun Weight (lb): 2.9
- Gun Weight (oz): 46.4
- Impingement Port Size (in): 0.035
- Impingement Port Size (mm): 0.89
- Impingement Type: Standard
- Maximum Air Inlet Pressure (bar): 9
- Maximum Air Inlet Pressure (kPa): 900
- Maximum Air Inlet Pressure (MPa): 0.9
- Maximum Air Inlet Pressure (psi): 130
- Maximum Air Pressure (bar): 9
- Maximum Air Pressure (kPa): 900
- Maximum Air Pressure (MPa): 0.9
- Maximum Air Pressure (psi): 130
- Maximum Flow Rate @ PSI (lb/min): 50
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature (°C): 93
- Maximum Fluid Temperature (°F): 200
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature (°C): 93
- Maximum Fluid Temperature (°F): 200
- Maximum Fluid Working Pressure (bar): 245
- Maximum Fluid Working Pressure (MPa): 24.5
- Maximum Fluid Working Pressure (psi): 3500
- Minimum Air Inlet Pressure (bar): 5.5
- Minimum Air Inlet Pressure (kPa): 550
- Minimum Air Inlet Pressure (MPa): 0.55
- Minimum Air Inlet Pressure (psi): 80
- Mix Module: .035
$4,560.00
Kit, Accy, Air Fltr/Reg, 1/2 Npt
GG 246947
GG 246947
KIT, ACCY, AIR FLTR/REG, 1/2 NPT
Graco 246947 Regulator / Filter Assembly 1/2" npt(f) (12.7 mm) for Husky 1050, 1590, 15120, 2150 and 2200 pumps
Application: For use with Husky 1040, 1590, and 2150 Pumps.1/2 NPT
250 psi Working Pressure
- Air Inlet Size (cm): 1.27
- Air Inlet Size (in): 1/2
- Air Inlet Size (mm): 12.7
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Air Outlet Size (cm): 1.27
- Air Outlet Size (in): 1/2
- Air Outlet Size (mm): 12.7
- Air Outlet Thread Gender: Female
- Air Outlet Thread Type: NPT
$275.50
Kit, Hose, Fluid, 25Ft, Cs
GG 24F165
GG 24F165
KIT, HOSE, FLUID, 25FT, CS
Graco 24F165 Fluid Hose, 1/8" ID, 25 ft (7.5 m), plated steel
$153.00
Agitator, Speed Control
GG 24G621
GG 24G621
AGITATOR, SPEED CONTROL
Graco 24G621 Agitator Speed Controller- Automatic Speed Controller for Air Drive Agitators
Maintain consistent agitator speed, even with an empty drum
- Quick install, requires less than 1 minute to setup
- Prevents over agitation for shear sensitive and waterborne materials
- Saves energy by limiting agitator over speeding Prevents motor over speeding, extending lifetime
- Maintains constant set speed even as viscosity or drum levels change
- Provides closed-loop speed control for agitators
- Air Inlet Size (cm): 0.3175
- Air Inlet Size (in): 1/8
- Air Inlet Size (mm): 3.175
- Air Inlet Thread Type: NPT
$819.00
VALVE, BACK PRESSURE
GG 222405
GG 222405
VALVE, BACK PRESSURE
High Pressure Fluid Back Pressure Regulator, 3000 Max psi, CS, Spring Type, 1/4 (f) x 1/4 (f) Tungsten and carbide materials ensure low wear and long life Plated carbon steel housing is compatible with solvent-borne materials Laser-marked indication lines for easy pressure adjustment and process control Ergonomic adjustment knob
$1,740.00
Kit, Repair, Pump, 8Cm
GG 222864
GG 222864
KIT,REPAIR, PUMP, 8CM
Graco 222864 Pump Repair Kit for Check-Mate 800 Carbon Steel Pump- UHMWPE/PTFE Throat and Intake Packages
KIT INCLUDES: GLAND, PACKING, MALE [QTY. 1], GLAND, PACKING, FEMALE [QTY. 1], GLAND, PACKING MALE [QTY. 1], GLAND, PACKING FEMALE [QTY. 1], PACKING, VEE [QTY. 3], PACKING, VEE [QTY. 2], PACKING, VEE [QTY. 2], PACKING, VEE [QTY. 2], PACKING, O-RING [QTY. 2], PACKING, O-RING [QTY. 1], SEAL, PISTON [QTY. 1], SEAL, VALVE [QTY. 1], SEAL, (8, 10 CM) [QTY. 1]
- Compatible Material: CARC, Enamel, Epoxies, High Solids, Latex, Lacquer, Metallics, Stains, Single Components, Solventborne Paints, Solventborne, Varnish Primers
$571.00
Filter Assembly, Fluid, High Pressure, 60 Mesh
GG 223160
GG 223160
FILTER, FLUID
Graco 223160 Stainless Steel High Pressure Fluid Filter, filter assembly, 60 mesh
All stainless steel construction with PTFE o-ring and polyethylene screen support. Resists corrosion from waterborne materials, catalyzed varnishes and other fluids not compatible with carbon steel or aluminum. Polyethylene support prevents screen collapse for maximum performance.
Application: Corrosion resistant fluid filters for catalyst and waterborne materials.
$1,330.00
Hose, Coupled, 61268, 36 Ft
GG 223071
GG 223071
HOSE, COUPLED, 61268, 36 FT
Graco 223071 Standard Grounded Air Hose (Grey)- 0.315 in. (8 mm) ID, 1/4 npsm(f) x 1/4 npsm(f) left-handthread, 36 ft (11 m) length
$670.00
Kit, Repair, Diaphragm, 350Cc
GG 17H303
GG 17H303
KIT, REPAIR, DIAPHRAGM, 350CC
Graco 17H303 Overmolded Diaphragm Kit for Endura-Flo 3D350 & 4D350, includes 2 diaphragms, diaphragm replacement tools, and o-rings
$900.00
Kit, Silicone Wipers
GG 17J585
GG 17J585
Kit, Silicone Wipers
KIT INCLUDES: SEAL, DRUM WIPER 55GAL SILICONE [QTY. 2 ]
$2,190.00
FRP RS GEL SYSTEM, XG, 13:1, CART, 50
GG 16R012
GG 16R012
FRP RS GEL SYSTEM, XG, 13:1, CART, 50
Graco 16R012 13:1 Ratio External Mix Gel System with 50 ft (15.2 m) Hose and Cart
To keep material costs low, the system has been designed so that it doesn’t need a surge bottle and a low amount of solvent and resin is needed to prime the pump. It also features a dual trigger function, allowing operators to change from wet-out to chop without removing the chopper. By purely using Graco components, that are proven in multiple industries, you will have a solution that is technologically advanced, durable and long lasting.
Application: Fiberglass chopper System for Open Molding Handle fiberglass and catalyzed resin with ease with Graco spray-up laminating components and systems. The FRP system can be used to apply chopped fiberglass on your open mold applications. It offers precise on-ratio dispensing with easy transition from wet-out to chop.- Optimized ratio stability
- Lower cost of ownership
- Optional DataTrak™ Control
- Gravity Fed Catalyst System
- New Linkage and Catalyst Pump
- Balanced Graco NXT® Air Motor
- Control Panel
- Stable, Lightweight Cart
Easy to maneuver
Strong, durable casters
- Model: FRP
- Series: XG
- Air Inlet Size (in): 1/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Component A Inlet Size (in): 3/8
- Component B Inlet Size (in): 1-5/16
- Component B Thread Gender: Male
- Component B Thread Type: UN-2A
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (in): 3/4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Hose Length (ft): 50
- Hose Length (m): 15.2
- Includes: Hose, C
Easy user interface with all gauges in one location
- Stable, Lightweight Cart
Provides same output pressure on upstroke and downstroke, resulting in more consistent spray pattern
Shortened stroke on pump for better spray pattern
- Control Panel
Truly engineered linkage for superior ratio control
Allows for infinite adjustment of catalyst percentage — no tools required
Ensures proper catalyst percentage and optimum results
Variance of 1% or less
- Balanced Graco NXT® Air Motor
Keeps the catalyst pump primed for consistent delivery
- New Linkage and Catalyst Pump
Monitors resin usage - Helps ensure product quality by tracking resin usage per piece, shift or day
Tracks cycles for preventive maintenance schedule
Displays real time flow rate - eliminates material waste due to worn spray tips
- Gravity Fed Catalyst System
Easy maintenance - fewer repair parts
Long lasting seals mean less downtime
Pumps last longer between planned maintenances
No surge bottle necessary, less parts, solvent and resin needed to prime the pump
- Optional DataTrak™ Control
Adjustable ratio catalyst pump - no tools are required for a quick and easy ratio change.
Precision engineered linkage offers you superior ratio control and consistent cure
- Lower cost of ownership
$15,170.00
HUSKY SYSTEM, CART, 1050P-E, PP/PT/PTS/5B
GG 24Y559
GG 24Y559
HUSKY SYSTEM, CART, 1050P-E, PP/PT/PTS/5B
Graco 24Y559 Husky 1050e PP Electric Operated Double Diaphragm Plastic Pump System with Cart, PTFE
Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.
- Patent pending technology allows pump to stall under pressure preventing pump failures from clogged lines or closed valves
- Energy efficient - electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Model: Husky
- Series: 1050e
- Air Inlet Size (in): 3/8
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Ball Material: PTFE
- Center Section Material: Aluminum
- Compatible Material: Antifreeze, Gel-Coat, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Detergent, Motor Oil, Grease & Oil, Used Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Oil, Water, Water - Wastewater Treatment, Water - Wastewater Transfer, Water, Waterborne, Solvent borne, High Solids, Plural Components, CARC, Metallics, Topcoats, Stains, Varnish, Lacquer, Ceramics, Enamel, Epoxies, Ink
- Diaphragm Compatible Material: PTFE
- Diaphragm Material: PTFE
- Fluid Inlet Size (cm): 2.54
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4
- Fluid Outlet Size (cm): 2.54
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Fluid Section Material: Polypropylene
- Manifold Configuration: Center Port
- Material: Polypropylene
- Maximum Air Pressure (bar): 5.5
- Maximum Air Pressure (kPa): 550
- Maximum Air Pressure (MPa): 0.55
- Maximum Air Pressure (psi): 80
- Maximum Amperage (A): 5.2
- Maximum Cycle Rate (CPM): 280
- Maximum Flow Rate (GPM): 42
- Maximum Flow Rate (L/min): 159
- Maximum Fluid Pressure (bar): 4.8
- Maximum Fluid Pressure (kPa): 480
- Maximum Fluid Pressure (MPa): 0.48
- Maximum Fluid Pressure (psi): 70
- Maximum Fluid Pressure (bar): 4.8
- Maximum Fluid Pressure (kPa): 480
- Maximum Fluid Pressure (MPa): 0.48
- Maximum Fluid Pressure (psi): 70
- Maximum Motor Speed (RPM): 3600
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Solid Size (cm): 0.3175
- Maximum Solid Size (in): 0.125
- Maximum Solid Size (mm): 3.175
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Operating Temperature (°C): 0
- Minimum Operating Temperature (°F): 32
- Minimum Storage Temperature (°C): 0
- Minimum Storage Temperature (°F): 32
- Motor Type:
$10,810.00
HUSKY SYSTEM, CART, 1050S-E, SS/PT/PTS/5B
GG 24Y561
GG 24Y561
HUSKY SYSTEM, CART, 1050S-E, SS/PT/PTS/5B
Graco 24Y561 Husky 1050e SS Electric Operated Double Diaphragm Metal Pump System with Cart, PTFE
Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.
- Patent pending technology allows pump to stall under pressure preventing pump failures from clogged lines or closed valves
- Energy efficient - electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Model: Husky
- Series: 1050e
- Air Inlet Size (in): 3/8
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Ball Material: PTFE
- Center Section Material: Aluminum
- Compatible Material: Antifreeze, Gel-Coat, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Detergent, Motor Oil, Grease & Oil, Used Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Oil, Water, Water - Wastewater Treatment, Water - Wastewater Transfer, Water, Waterborne, Solvent borne, High Solids, Plural Components, CARC, Metallics, Topcoats, Stains, Varnish, Lacquer, Ceramics, Enamel, Epoxies, Ink
- Connection Type: Threaded
- Diaphragm Compatible Material: PTFE
- Diaphragm Material: PTFE
- Fluid Inlet Size (cm): 2.54
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 2.54
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Material: Stainless Steel
- Manifold Configuration: Center Port
- Material: Stainless Steel
- Maximum Air Pressure (bar): 5.5
- Maximum Air Pressure (kPa): 550
- Maximum Air Pressure (MPa): 0.55
- Maximum Air Pressure (psi): 80
- Maximum Amperage (A): 5.2
- Maximum Cycle Rate (CPM): 280
- Maximum Flow Rate (GPM): 42
- Maximum Flow Rate (L/min): 159
- Maximum Fluid Pressure (bar): 4.8
- Maximum Fluid Pressure (kPa): 480
- Maximum Fluid Pressure (MPa): 0.48
- Maximum Fluid Pressure (psi): 70
- Maximum Fluid Pressure (bar): 4.8
- Maximum Fluid Pressure (kPa): 480
- Maximum Fluid Pressure (MPa): 0.48
- Maximum Fluid Pressure (psi): 70
- Maximum Motor Speed (RPM): 3600
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Solid Size (cm): 0.3175
- Maximum Solid Size (in): 0.125
- Maximum Solid Size (mm): 3.175
- Maximum Storage Temperature (°C): 40
- Maximum Storage Temperature (°F): 104
- Minimum Operating T
$12,100.00
PROMIX PD2K PROPORTIONER, SYSTEM, PD, MANUAL, LP
GG MC1000
GG MC1000
PROMIX PD2K PROPORTIONER, SYSTEM, PD, MANUAL, LP
Graco MC1000 ProMix PD2K Manual Proportioner, Standard, Low Pressure, 70 cc Resin Pump, 35 cc Catalyst Pump, 1 Solvent Valve
100% Positive Displacement Technology for accurate mix ratios and consistent performance. Great for short pot life materials, the ProMix PD mixes the material close to the gun so the flush zone is significantly smaller. This allows for faster color changes, less material usage and disposal costs overall.
- Up to 80% reduction in flushing waste over the most efficient traditional proportioning systems
- Faster color changes and less material to flush mean less waste and less downtime
- Stalls under pressure for consistent, on-ratio results (within 1% accuracy)
- Field serviceable in less than 20 minutes - no need for costly factory rebuilds like gear pumps
- Model: ProMix
- Series: PD2K
- Air Inlet Size (cm): 0.9525
- Air Inlet Size (in): 3/8
- Air Inlet Size (mm): 9.525
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Applicator Type: Manual
- Component Type: Two Component
- Flush Type: Solvent
- Frequency (Hz): 50/60
- Gun Activation: Manual
- Material Type: Plural Component
- Maximum Mix Ratio: 50:1
- Maximum Number of Colors: Up to 30
- Maximum Working Pressure (bar): 7
- Maximum Working Pressure (kPa): 700
- Maximum Working Pressure (MPa): 0.7
- Maximum Working Pressure (psi): 100
- Measuring Type: Meter
- Minimum Mix Ratio: 0.1:1
- Mix Accuracy (%): 1
- Number of Catalysts: Up to 4
- Number of Color Valves: N/A
- Number of Resin Colors: Up to 30
- Power Source: Electric
- Pressure Type: Low Pressure
- Proportioner Type: Manual
- Proportioning Type: Manual Electronic
$54,960.00
PROMIX 2KS PROPORTIONER, MANUAL
GG MD1202
GG MD1202
PROMIX 2KS PROPORTIONER, MANUAL
Graco MD1202 ProMix 2KS Manual Wall Panel, EasyKey with LCD display, G3000 A & B Meter, 4 colors LP, 1 catalyst, and 2 Air Flow Switches
Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.
- Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
- Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
- Intrinsically safe fluid panels easily integrate into hazardous areas
- Advanced web interface provides consolidated system management and reporting
- Model: ProMix
- Series: 2KS
- Air Inlet Size (cm): 0.9525
- Air Inlet Size (in): 3/8
- Air Inlet Size (mm): 9.525
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Amperage (A): 2
- Applicator Type: Manual
- Component Type: Two Component
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (in): 1/4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Flush Type: Air/Solvent
- Frequency (Hz): 50/60
- Gun Activation: Manual
- Material Type: Two Component
- Maximum Flow Rate (cc/min): 3790
- Maximum Flow Rate (GPM): 1
- Maximum Flow Rate (L/min): 3.79
- Maximum Fluid Viscosity (cP): 3000
- Maximum Fluid Viscosity (cP): 3000
- Maximum Mix Ratio: 50:1
- Maximum Number of Colors: Up to 12
- Maximum Working Pressure (bar): 275.8
- Maximum Working Pressure (kPa): 27580
- Maximum Working Pressure (MPa): 27.6
- Maximum Working Pressure (psi): 4000
- Measuring Type: Meter
- Meter Type: G3000
- Minimum Flow Rate (cc/min): 75
- Minimum Flow Rate (GPM): 0.02
- Minimum Flow Rate (L/min): 0.075
- Minimum Fluid Viscosity (cP): 20
- Minimum Mix Ratio: 0.1:1
- Mix Accuracy (%): 1
- Number of Catalysts: 1
- Number of Color Valves: 4 Valves
- Number of Colors: 4
- Number of Resin Colors: 4
- Power Source: Electric
- Proportioner Type: Manual
- Proportioning Type: Manual Electronic
$62,160.00
Pro XP Gun, ES, 85KV, AA
GG H85T10
GG H85T10
Pro XP Gun, ES, 85KV, AA
Graco H85T10 Pro Xp85 Air Assist Manual Electrostatic Gun, 85 kV, with standard display, standard coatings, includes AEM or AEF tip of choice
Pro Xp85 kV air-assist gun maximizes transfer efficiency and lowers cost of ownership. Pro Xp85 AA gun line includes Standard and Smart models.
- High quality spray performance with a one-piece aircap and variety of spray tips
- Alternator speed indicator light ensures your turbine speed is running at the correct level
- Smart Controls help you analyze performance, adapt to your voltage needs and make troubleshooting easier
- Internal power supply reduces operator fatigue with no heavy cords to slow you done
- Rugged, dependable design supported by a three year warranty
- Every gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco&prime, s requirements
- Model: Pro Xp
- Series: 85
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Application: Electrostatic, Standard
- Applicator Type: Manual
- Coating Type: Standard
- Compatible Paint Type: Epoxy, High Solids, Lacquers, Latex, Plural Component Materials, Polyurethanes, Urethanes, UV Curing, Varnishes, Waterborne
- Display Type: Standard
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Type: Electrostatic
- Gun Weight (g): 728
- Gun Weight (kg): 0.73
- Gun Weight (lb): 1.6
- Gun Weight (oz): 25.68
- Includes: Tip Guard Air Cap, Tip of Choice, Tool Kit, Gun Cover, Exhaust Tube
- Maximum Fluid Pressure (bar): 210
- Maximum Fluid Pressure (kg/cm²): 214.14
- Maximum Fluid Pressure (kPa): 21000
- Maximum Fluid Pressure (MPa): 21
- Maximum Fluid Pressure (psi): 3000
- Maximum Fluid Temperature (°C): 48
- Maximum Fluid Temperature (°F): 120
- Maximum Fluid Pressure (bar): 210
- Maximum Fluid Pressure (kg/cm²): 214.14
- Maximum Fluid Pressure (kPa): 21000
- Maximum Fluid Pressure (MPa): 21
- Maximum Fluid Pressure (psi): 3000
- Maximum Fluid Temperature (°C): 48
- Maximum Fluid Temperature (°F): 120
- Maximum Paint Resistivity (megohm/cm): Infinity
- Minimum Paint Resistivity (megohm/cm): 3
- Overall Length (cm): 27.18
- Overall Length (in): 10.7
- Overall Length (mm): 271.8
$10,070.00
Module, Tank, 38L, Agt, Slg, Ht, In, Lv
GG 24D572
GG 24D572
Module, Tank, 38L, Agt, Slg, Ht, In, Lv
$42,610.00