GRACO INC. S10595
RAC 5 TIP, SPRAY
GG 286519
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 519 The Reverse-A-Clean (RAC) 519 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.019 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics. Most Widely Used Reversible Spray Tip on the Market (Black Handle)- Used for residential and commercial applications
- Includes OneSeal for most common coatings
- Large selection of tip sizes available
- Easy to identify laser stamped tip size
- Solvent seal available when using extremely hot solvents
RAC 5 TIP, SPRAY
GG 286521
RAC 5 TIP, SPRAY
Graco 286521 RAC 5 SwitchTip, 521
The Reverse-A-Clean (RAC) 521 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.021 inch orifice. Reverse the SwitchTip to easily clear clogs.
Application: Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 30.5
- Maximum Fan Width (in): 10
- Maximum Fan Width (mm): 305
- Maximum Flow Rate (GPM): 0.47
- Maximum Flow Rate (L/min): 1.78
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 10
- Minimum Fan Width (mm): 254
- Orifice Diameter (in): 0.021
RAC 5 TIP, SPRAY
GG 286523
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 523 The Reverse-A-Clean (RAC) 523 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.023 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
- Used for residential and commercial applications
- Includes OneSeal for most common coatings
- Large selection of tip sizes available
- Easy to identify laser stamped tip size
- Solvent seal available when using extremely hot solvents
RAC 5 TIP, SPRAY
GG 286525
RAC 5 TIP, SPRAY
Graco 286525 RAC 5 SwitchTip, 525
The Reverse-A-Clean (RAC) 525 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.025 inch orifice. Reverse the SwitchTip to easily clear clogs.
Application: Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 30.5
- Maximum Fan Width (in): 10
- Maximum Fan Width (mm): 305
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.54
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 10
- Minimum Fan Width (mm): 254
- Orifice Diameter (in): 0.025
RAC 5 TIP, SPRAY
GG 286527
RAC 5 TIP, SPRAY
Graco 286527 RAC 5 SwitchTip, 527
The Reverse-A-Clean (RAC) 527 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.027 inch orifice. Reverse the SwitchTip to easily clear clogs.
- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Lacquer to Mastic, Latex Paint
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 30.5
- Maximum Fan Width (in): 10
- Maximum Fan Width (mm): 305
- Maximum Flow Rate (GPM): 0.77
- Maximum Flow Rate (L/min): 2.91
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 10
- Minimum Fan Width (mm): 254
- Orifice Diameter (in): 0.027
- Pattern Size (in): 10 to 12
- Pattern Size (mm): 254 to 304.8
RAC 5 TIP, SPRAY
GG 286529
RAC 5 TIP, SPRAY
Graco 286529 RAC 5 SwitchTip, 529
The Reverse-A-Clean (RAC) 529 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.029 inch orifice. Reverse the SwitchTip to easily clear clogs.
- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Lacquer to Mastic, Latex Paint
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 30.5
- Maximum Fan Width (in): 10
- Maximum Fan Width (mm): 305
- Maximum Flow Rate (GPM): 0.9
- Maximum Flow Rate (L/min): 3.41
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 10
- Minimum Fan Width (mm): 254
- Orifice Diameter (in): 0.029
- Pattern Size (in): 10 to 12
- Pattern Size (mm): 254 to 304.8
RAC 5 TIP, SPRAY
GG 286531
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 531 The Reverse-A-Clean (RAC) 531 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.031 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
- Used for residential and commercial applications
- Includes OneSeal for most common coatings
- Large selection of tip sizes available
- Easy to identify laser stamped tip size
- Solvent seal available when using extremely hot solvents
RAC 5 TIP, SPRAY
GG 286533
RAC 5 TIP, SPRAY
Graco 286533 RAC 5 SwitchTip, 533
The Reverse-A-Clean (RAC) 533 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.033 inch orifice. Reverse the SwitchTip to easily clear clogs.
- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Lacquer to Mastic, Latex Paint
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 30.5
- Maximum Fan Width (in): 10
- Maximum Fan Width (mm): 305
- Maximum Flow Rate (GPM): 1.17
- Maximum Flow Rate (L/min): 4.43
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 10
- Minimum Fan Width (mm): 254
- Orifice Diameter (in): 0.033
- Pattern Size (in): 10 to 12
- Pattern Size (mm): 254 to 304.8
RAC 5 TIP, SPRAY
GG 286535
RAC 5 TIP, SPRAY
Graco 286535 RAC 5 SwitchTip, 535
The Reverse-A-Clean (RAC) 535 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.035 inch orifice. Reverse the SwitchTip to easily clear clogs.
- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Lacquer to Mastic, Latex Paint
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 30.5
- Maximum Fan Width (in): 10
- Maximum Fan Width (mm): 305
- Maximum Flow Rate (GPM): 1.31
- Maximum Flow Rate (L/min): 4.96
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 10
- Minimum Fan Width (mm): 254
- Orifice Diameter (in): 0.035
- Pattern Size (in): 10 to 12
- Pattern Size (mm): 254 to 304.8
RAC 5 TIP, SPRAY
GG 286543
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 543 The Reverse-A-Clean (RAC) 543 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.043 inch orifice. Reverse the SwitchTip to easily clear clogs.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
RAC 5 TIP, SPRAY
GG 286609
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 609 The Reverse-A-Clean (RAC) 609 RAC 5 SwitchTip produces a 12 to 14 inch fan and has a 0.009 inch orifice. Reverse the SwitchTip to easily clear clogs.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
RAC 5 TIP, SPRAY
GG 286611
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 611 The Reverse-A-Clean (RAC) 611 RAC 5 SwitchTip produces a 12 to 14 inch fan and has a 0.011 inch orifice. Reverse the SwitchTip to easily clear clogs.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
RAC 5 TIP, SPRAY
GG 286613
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 613 The Reverse-A-Clean (RAC) 613 RAC 5 SwitchTip produces a 12 to 14 inch fan and has a 0.013 inch orifice. Reverse the SwitchTip to easily clear clogs.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
RAC 5 TIP, SPRAY
GG 286615
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 615 The Reverse-A-Clean (RAC) 615 RAC 5 SwitchTip produces a 12 to 14 inch fan and has a 0.015 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics. Most Widely Used Reversible Spray Tip on the Market (Black Handle)- Used for residential and commercial applications
- Includes OneSeal for most common coatings
- Large selection of tip sizes available
- Easy to identify laser stamped tip size
- Solvent seal available when using extremely hot solvents
RAC 5 TIP, SPRAY
GG 286617
RAC 5 TIP, SPRAY
Graco 286617 RAC 5 SwitchTip, 617
The Reverse-A-Clean (RAC) 617 RAC 5 SwitchTip produces a 12 to 14 inch fan and has a 0.017 inch orifice. Reverse the SwitchTip to easily clear clogs.
Application: Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 35.6
- Maximum Fan Width (in): 12
- Maximum Fan Width (mm): 356
- Maximum Flow Rate (GPM): 0.31
- Maximum Flow Rate (L/min): 1.17
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 12
- Minimum Fan Width (mm): 305
- Orifice Diameter (in): 0.017
RAC 5 TIP, SPRAY
GG 286817
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 817 The Reverse-A-Clean (RAC) 817 RAC 5 SwitchTip produces a 16 to 18 inch fan and has a 0.017 inch orifice. Reverse the SwitchTip to easily clear clogs.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
RAC 5 TIP, SPRAY
GG 286935
RAC 5 TIP, SPRAY
Graco 286935 RAC 5 SwitchTip, 935
The Reverse-A-Clean (RAC) 935 RAC 5 SwitchTip produces an 18 to 20 inch (46 to 51 cm) fan and has a 0.035 inch orifice. Reverse the SwitchTip to easily clear clogs.
- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Lacquer to Mastic, Latex Paint
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 50.8
- Maximum Fan Width (in): 18
- Maximum Fan Width (mm): 508
- Maximum Flow Rate (GPM): 1.31
- Maximum Flow Rate (L/min): 4.96
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 18
- Minimum Fan Width (mm): 457
- Orifice Diameter (in): 0.035
- Pattern Size (in): 18 to 20
- Pattern Size (mm): 457.2 to 508
RAC 5 TIP, SPRAY
GG 286815
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 815 The Reverse-A-Clean (RAC) 815 RAC 5 SwitchTip produces a 16 to 18 inch fan and has a 0.015 inch orifice. Reverse the SwitchTip to easily clear clogs.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
EXTENSION, TIP, 30"
GG 287022
EXTENSION, TIP, 30"
RAC X Tip Extension, 30 in The 30 inch RAC X Tip Extension is ideal for hard-to-reach areas such as soffits, stairways, and vaulted ceilings. Includes RAC X HandTite Guard. Can be combined for extended reach up to 6 feet. Includes RAC X HandTite Guard standard with 7/8 inch gun nut and OneSeal Can be combined for extended reach up to 6 ft Ideal for hard-to-reach areas such as soffits, stairways, and vaulted ceilings Extend range and spray more efficiently without ladders or scaffolding Made from aluminum for a durable and lightweight design Extension lengths can be combined for extended reach up to 6 feet (1.82 meters) Includes RAC X HandTite Guard standard with 7/8 inch gun nut and OneSealGUN, POLE, 3', DOMESTIC
GG 287023
GUN, POLE, 3', DOMESTIC
Graco 287023 Pole Gun, 3 ft
Extend your range and spray more efficiently without ladders or scaffolding with the 3 foot Pole Gun.
- Heavy-duty extensions are ideal for high-pressure spraying or pressure roller applications.
- Airless Tip Extensions can be attached directly to an airless gun making them ideal for spraying ceilings, overhangs and decks.
- CleanShot Valve can be attached directly to any extension and provides a clean fluid shutoff at the tip – no spitting.
- Model: Graco
- Series: Pole Gun
- Bleed Type: Bleeder
- Compatible Material: Water-Based Paint
- Component A Inlet Size (in): 1/4
- Component A Inlet Thread Type: NPSM
- Component Type: Single Component
- Fluid Orifice Size (cm): 0.229
- Fluid Orifice Size (in): 0.090
- Fluid Orifice Size (mm): 2.29
- For Use With: Electric Airless Sprayer
- Gun Activation: Manual
- Gun Type: Pole Gun
- Gun Weight (kg): 0.1253
- Gun Weight (lb): 2.76
- Includes: Cleanshot Shut-off Valve, Contractor In-line Valve
- Maximum Fluid Pressure (bar): 248
- Maximum Fluid Pressure (kPa): 24800
- Maximum Fluid Pressure (MPa): 24.8
- Maximum Fluid Pressure (psi): 3600
- Maximum Fluid Pressure (bar): 248
- Maximum Fluid Pressure (kPa): 24800
- Maximum Fluid Pressure (MPa): 24.8
- Maximum Fluid Pressure (psi): 3600
- Purge Method: Liquid
RAC 5 TIP, SPRAY
GG 286723
RAC 5 TIP, SPRAY
Graco 286723 RAC 5 SwitchTip, 723
The Reverse-A-Clean (RAC) 723 RAC 5 SwitchTip produces a 14 to 16 inch fan and has a 0.023 inch orifice. Reverse the SwitchTip to easily clear clogs.
- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Lacquer to Mastic, Latex Paint
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 40.6
- Maximum Fan Width (in): 14
- Maximum Fan Width (mm): 406
- Maximum Flow Rate (GPM): 0.57
- Maximum Flow Rate (L/min): 2.16
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 14
- Minimum Fan Width (mm): 356
- Orifice Diameter (in): 0.023
- Pattern Size (in): 14 to 16
- Pattern Size (mm): 355.6 to 406.4
RAC 5 TIP, SPRAY
GG 286621
RAC 5 TIP, SPRAY
Graco 286621 RAC 5 SwitchTip, 621
The Reverse-A-Clean (RAC) 621 RAC 5 SwitchTip produces a 12 to 14 inch fan and has a 0.021 inch orifice. Reverse the SwitchTip to easily clear clogs.
Application: Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 35.6
- Maximum Fan Width (in): 12
- Maximum Fan Width (mm): 356
- Maximum Flow Rate (GPM): 0.47
- Maximum Flow Rate (L/min): 1.78
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 12
- Minimum Fan Width (mm): 305
- Orifice Diameter (in): 0.021
EXTENSION, TIP, 20"
GG 287021
EXTENSION, TIP, 20"
Graco 287021 RAC X Tip Extension, 20 in
The 20 inch RAC X Tip Extension is ideal for hard-to-reach areas such as soffits, stairways, and vaulted ceilings. Includes RAC X HandTite Guard. Can be combined for extended reach up to 6 feet.
- Includes RAC X HandTite Guard standard with 7/8 inch gun nut and OneSeal
- Can be combined for extended reach up to 6 ft
- Ideal for hard-to-reach areas such as soffits, stairways, and vaulted ceilings
- Extend range and spray more efficiently without ladders or scaffolding
- Made from aluminum for a durable and lightweight design
- Extension lengths can be combined for extended reach up to 6 feet (1.82 meters)
- Includes RAC X HandTite Guard standard with 7/8 inch gun nut and OneSeal
- Model: RAC X
- Series: Tip Extension
- Compatible Spray Tip: RAC X
- For Use With: RAC X SwitchTips
- Includes: RAC X HandTite Guard Standard, 7/8 in Gun Nut, OneSeal
- Maximum Working Pressure (bar): 279
- Maximum Working Pressure (kPa): 27900
- Maximum Working Pressure (MPa): 27.9
- Maximum Working Pressure (psi): 4050
- Overall Length (cm): 50.8
- Overall Length (in): 20
- Pole Type: Extension Pole
RAC 5 TIP, SPRAY
GG 286819
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 819 The Reverse-A-Clean (RAC) 819 RAC 5 SwitchTip produces a 16 to 18 inch fan and has a 0.019 inch orifice. Reverse the SwitchTip to easily clear clogs.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
RAC 5 TIP, SPRAY
GG 286655
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 655 The Reverse-A-Clean (RAC) 655 RAC 5 SwitchTip produces a 12 to 14 inch fan and has a 0.055 inch orifice. Reverse the SwitchTip to easily clear clogs.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
RAC 5 TIP, SPRAY
GG 286831
RAC 5 TIP, SPRAY
Graco 286831 RAC 5 SwitchTip, 831
The Reverse-A-Clean (RAC) 831 RAC 5 SwitchTip produces a 16 to 18 inch fan and has a 0.031 inch orifice. Reverse the SwitchTip to easily clear clogs.
- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Lacquer to Mastic, Latex Paint
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 45.7
- Maximum Fan Width (in): 16
- Maximum Fan Width (mm): 457
- Maximum Flow Rate (GPM): 1.03
- Maximum Flow Rate (L/min): 3.90
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 16
- Minimum Fan Width (mm): 406
- Orifice Diameter (in): 0.031
- Pattern Size (in): 16 to 18
- Pattern Size (mm): 406.4 to 457.2
RAC 5 TIP, SPRAY
GG 286821
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 821 The Reverse-A-Clean (RAC) 821 RAC 5 SwitchTip produces a 16 to 18 inch fan and has a 0.021 inch orifice. Reverse the SwitchTip to easily clear clogs.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
RAC 5 TIP, SPRAY
GG 286631
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 631 The Reverse-A-Clean (RAC) 631 RAC 5 SwitchTip produces a 12 to 14 inch fan and has a 0.031 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
- Used for residential and commercial applications
- Includes OneSeal for most common coatings
- Large selection of tip sizes available
- Easy to identify laser stamped tip size
- Solvent seal available when using extremely hot solvents
RAC 5 TIP, SPRAY
GG 286625
RAC 5 TIP, SPRAY
Graco 286625 RAC 5 SwitchTip, 625
The Reverse-A-Clean (RAC) 625 RAC 5 SwitchTip produces a 12 to 14 inch fan and has a 0.025 inch orifice. Reverse the SwitchTip to easily clear clogs.
Application: Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Elastomer, Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 35.6
- Maximum Fan Width (in): 12
- Maximum Fan Width (mm): 356
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.54
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 12
- Minimum Fan Width (mm): 305
- Orifice Diameter (in): 0.025
EXTENSION, TIP, 15"
GG 287020
EXTENSION, TIP, 15"
Graco 287020 RAC X Tip Extension, 15 in
The 15 inch RAC X Tip Extension is ideal for hard-to-reach areas such as soffits, stairways, and vaulted ceilings. Includes RAC X HandTite Guard. Can be combined for extended reach up to 6 feet.
- Includes RAC X HandTite Guard standard with 7/8 inch gun nut and OneSeal
- Can be combined for extended reach up to 6 ft
- Model: RAC X
- Series: Tip Extension
- Compatible Spray Tip: RAC X
- For Use With: RAC X SwitchTips
- Includes: RAC X HandTite Guard Standard, 7/8 in Gun Nut, OneSeal
- Maximum Working Pressure (bar): 279
- Maximum Working Pressure (kPa): 27900
- Maximum Working Pressure (MPa): 27.9
- Maximum Working Pressure (psi): 4050
- Overall Length (cm): 38.1
- Overall Length (in): 15
EXTENSION, TIP, 10"
GG 287019
EXTENSION, TIP, 10"
Graco 287019 RAC X Tip Extension, 10 in
The 10 inch RAC X Tip Extension is ideal for hard-to-reach areas such as soffits, stairways, and vaulted ceilings. Includes RAC X HandTite Guard. Can be combined for extended reach up to 6 feet.
- Includes RAC X HandTite Guard standard with 7/8 inch gun nut and OneSeal
- Can be combined for extended reach up to 6 ft
- Ideal for hard-to-reach areas such as soffits, stairways, and vaulted ceilings
- Extend range and spray more efficiently without ladders or scaffolding
- Made from aluminum for a durable and lightweight design
- Extension lengths can be combined for extended reach up to 6 feet (1.82 meters)
- Includes RAC X HandTite Guard standard with 7/8 inch gun nut and OneSeal
- Model: RAC X
- Series: Tip Extension
- Compatible Spray Tip: RAC X
- For Use With: RAC X SwitchTips
- Includes: RAC X HandTite Guard Standard, 7/8 in Gun Nut, OneSeal
- Maximum Working Pressure (bar): 279
- Maximum Working Pressure (kPa): 27900
- Maximum Working Pressure (MPa): 27.9
- Maximum Working Pressure (psi): 4050
- Overall Length (cm): 25.4
- Overall Length (in): 10
GUN, POLE, 6', DOMESTIC
GG 287024
GUN, POLE, 6', DOMESTIC
Pole Gun, 6 ft Eliminate the hassles of ladders and scaffolding to safely spray hard-to-reach areas like high walls, vaulted ceilings, stairways, and soffits. Complete the job faster with less setup time with a pole gun. For unmatched spraying performance in high or recessed areas Provides better spray control and less fatigue Balanced design with no excessive weight at the end of the pole Includes CleanShot Valve and In-Line Valve GunRAC 5 TIP, SPRAY
GG 286619
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 619 The Reverse-A-Clean (RAC) 619 RAC 5 SwitchTip produces a 12 to 14 inch fan and has a 0.019 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics. Most Widely Used Reversible Spray Tip on the Market (Black Handle)- Used for residential and commercial applications
- Includes OneSeal for most common coatings
- Large selection of tip sizes available
- Easy to identify laser stamped tip size
- Solvent seal available when using extremely hot solvents
RAC 5 TIP, SPRAY
GG 286721
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 721 The Reverse-A-Clean (RAC) 721 RAC 5 SwitchTip produces a 14 to 16 inch fan and has a 0.021 inch orifice. Reverse the SwitchTip to easily clear clogs.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
VALVE, SPRAY, PKG
GG 287030
VALVE, SPRAY, PKG
Graco 287030 CleanShot Valve
Unique needle valve shuts fluid off at the tip for a clean pattern, no spitting. A great addition to any extension.
- Unique needle valve shuts fluid off at the tip for a clean pattern – no spitting
- 180 degree tip swivel provides versatility when spraying walls and ceilings
- Pressure-actuated – operates at a minimum of 700 psi (4.8 MPa, 48 bar)
- Model: CleanShot
- Series: CleanShot
- For Use With: JetRoller
- Includes: Gasket
- Inlet Size (cm): 0.635
- Inlet Size (in): 1/4
- Inlet Size (mm): 6.35
- Inlet Thread Type: NPSM
- Maximum Working Pressure (bar): 248
- Maximum Working Pressure (kPa): 24800
- Maximum Working Pressure (MPa): 24.8
- Maximum Working Pressure (psi): 3600
- Outlet Size (cm): 2.2225
- Outlet Size (in): 7/8
- Outlet Size (mm): 22.225
- Outlet Thread Type: UNF
KIT, FILTER, GUN, 60 MESH
GG 287032
KIT, FILTER, GUN, 60 MESH
Gun Filter, 60 mesh The Gun Filter helps reduce tip plugging and provides a better quality finish by eliminating unwanted particles from the spray pattern. Use 60 mesh for materials such as primer and latex paint. The Gun Filter helps reduce tip plugging and provides a better quality finish by eliminating unwanted particles from the spray pattern Filters keep downtime to a minimum by reducing plugging at the spray tip Use 60 mesh for materials such as primer and latex paint.KIT, FILTER, GUN, 60/100MESH
GG 287034
KIT, FILTER, GUN, 60/100MESH
Graco 287034 Gun Filters, (1) 60 mesh and (1) 100 mesh
The Gun Filter helps reduce tip plugging and provides a better quality finish by eliminating unwanted particles from the spray pattern. Use 60 mesh for materials such as primer and latex paint. Use 100 mesh for thinner materials such as stain and lacquer.
- Model: Graco
- For Use With: Contractor II Spray Gun, FTx Spray Gun
- Mesh Size: 60, 100
- Number of Pieces: 2
KIT, ACCESSORY, FLEX, 3/8, LTX
GG 287095
KIT, ACCESSORY, FLEX, 3/8, LTX
Graco 287095 Flex Plus Airless Spray Gun, RAC X, BlueMax II Airless Hose, 1/4 in x 50 ft, 3 ft Whip Hose
Get up and spraying quickly with the ideal spray gun for applications using heavy coatings and joint compounds along with needed accessories. Keep a spare kit on hand to always be prepared for large projects where dual gun applications are required.
- Flex Plus Airless Spray Gun
Ergonomic handle
No adjustment needle
Patented needle design
Large fluid path
- RAC X LTX 517 SwitchTip
Provides 10 inch spray pattern
Ideal for larger surfaces such as houses/buildings, walls and ceilings
100% tested for flow rate
- BlueMax II Airless Hoses
The lightest, most flexible hoses on the market
Easy to connect and maintain
The highest level of performance from the sprayer to the gun
- Model: Silver Gun
- Kit Type: Spray Gun and Hose Kit
KIT REPAIR, HOSE, CPLD
GG 287314
KIT REPAIR, HOSE, CPLD
Graco 287314 RotoFlex HD Pump Hose
Application: For use with RTX 1500/5000PI/5000PX/5500PX
- Model: Graco
- Series: RotoFlex HD
KIT, ACCY, SILVER PLUS GUN, GH83
GG 287850
KIT, ACCY, SILVER PLUS GUN, GH83
Get up and spraying quickly with the industry’s preferred spray gun for high-pressure applications and needed accessories. Keep a spare kit on hand to always be prepared for large projects where dual gun applications are required.
- Silver Plus Gun
Lightweight, Rugged Design
Exclusive Needle Design
2-Finger Trigger Design and Handle
Stainless Steel Fluid Tube
- RAC X LTX 517 & 655 SwitchTips
Provides a 10 inch and 12 inch spray patterns
Ideal for larger surfaces such as houses/buildings, walls and ceilings
100% tested for flow rate
- BlueMax II Airless Hoses
The lightest, most flexible hoses on the market
Easy to connect and maintain
The highest level of performance from the sprayer to the gun
- Model: Silver Plus
RAC 5 TIP, SPRAY
GG 286729
RAC 5 TIP, SPRAY
Graco 286729 RAC 5 SwitchTip, 729
The Reverse-A-Clean (RAC) 729 RAC 5 SwitchTip produces a 14 to 16 inch fan and has a 0.029 inch orifice. Reverse the SwitchTip to easily clear clogs.
- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Lacquer to Mastic, Latex Paint
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 40.6
- Maximum Fan Width (in): 14
- Maximum Fan Width (mm): 406
- Maximum Flow Rate (GPM): 0.9
- Maximum Flow Rate (L/min): 3.41
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 14
- Minimum Fan Width (mm): 356
- Orifice Diameter (in): 0.029
- Pattern Size (in): 14 to 16
- Pattern Size (mm): 355.6 to 406.4
KING SPRAYER, 40:1, D-ICE, HD, COMP, AA
GG 287976
KING SPRAYER, 40:1, D-ICE, HD, COMP, AA
Heavy-Duty Cart Mounted AA Spray Package with 40:1 Mix Ratio and XL Air Motor with DataTrak High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application. Superior air-operated pumps for high-volume and high-pressure waterproofing, fireproofing and protective coatingsSimple Maintenance
- This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
- All motor parts are easily accessible and require simple maintenance
Improved Icing Performance
- The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
- The icing potential has been reduced by up to 70%
Less Pulsation
- With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
- Eliminating the "wink" in your pattern - it is a difference you will feel.
New MaxLife Pump Lowers
- Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.
New Air Motor
- Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.
RAC 5 TIP, SPRAY
GG 286635
RAC 5 TIP, SPRAY
Graco 286635 RAC 5 SwitchTip, 635
The Reverse-A-Clean (RAC) 635 RAC 5 SwitchTip produces a 12 to 14 inch fan and has a 0.035 inch orifice. Reverse the SwitchTip to easily clear clogs.
Application: Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Elastomer, Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 35.6
- Maximum Fan Width (in): 12
- Maximum Fan Width (mm): 356
- Maximum Flow Rate (GPM): 1.31
- Maximum Flow Rate (L/min): 4.96
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 12
- Minimum Fan Width (mm): 305
- Orifice Diameter (in): 0.035
Gun Auto Air-Assisted Reverse-A-Clean
GG 288053
Gun Auto Air-Assisted Reverse-A-CleanKit, Repair, Air Seal, Low Psi
GG 288171
KIT, REPAIR,AIR SEAL,LOW PSI
Graco 288171 Air Seal Repair Kit
Manifold, Rear Fitting, Inch
GG 288160
MANIFOLD, REAR FITTING, INCH
Graco 288160 Rear port manifold, North America
REGULATOR, BACK PRESSURE
GG 288117
REGULATOR, BACK PRESSURE
Graco 288117 Pneumatic Corrosion Resistant Fluid Back Pressure Regulator, 20 gpm, 300 psi max fluid pressure, 1-1/4 npt inlet/outlet, with gauge
- PTFE/Elastomer hybrid diaphragm withstands wear while maintaining accurate responsiveness
- Stainless steel wetted materials are compatible with catalyst and waterborne materials
- Hardened stainless steel seat ensure low wear and long life
- Air operated for remote automated control to eliminate operator interference
- Compatible Material: Catalyst, Waterborne
- Gauge Port Size (cm): 0.635
- Gauge Port Size (in): 1/4
- Gauge Port Size (mm): 6.35
- Gauge Port Type: NPT
- Includes: Gauge
- Inlet Size (cm): 3.175
- Inlet Size (in): 1-1/4
- Inlet Size (mm): 31.75
- Inlet Thread Type: NPT
- Maximum Air Inlet Pressure (bar): 6.9
- Maximum Air Inlet Pressure (kg/cm²): 7.03
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Flow Rate (GPM): 20
- Maximum Flow Rate (L/min): 75.7
- Maximum Regulated Pressure (bar): 17.2
- Maximum Regulated Pressure (kPa): 1720
- Maximum Regulated Pressure (psi): 250
- Maximum Viscosity (cP): 1000
- Maximum Working Pressure (bar): 21
- Maximum Working Pressure (kPa): 2100
- Maximum Working Pressure (psi): 300
- Minimum Regulated Pressure (bar): 1.7
- Minimum Regulated Pressure (kPa): 170
- Minimum Regulated Pressure (MPa): 0.017
- Minimum Regulated Pressure (psi): 25
- Outlet Size (cm): 3.175
- Outlet Size (in): 1-1/4
- Outlet Size (mm): 31.75
- Outlet Thread Type: NPT
Kit, Repair, Fluid, Aa
GG 288136
KIT, REPAIR,FLUID,AA
Graco 288136 Fluid Repair Kit for Automatic G40 Air-Assisted Spray Guns
Kit, Needle Assy, Carb/Carb
GG 288191
KIT, NEEDLE ASSY, CARB/CARB
Graco 288191 Fluid Needle, carbide ball, standard viscosity/standard flow
Kit, Needle Assy (Sst/Delrin)
GG 288190
KIT, NEEDLE ASSY (SST/DELRIN)
Graco 288190 Fluid Needle, SST ball, acid catalyzed materials/very low viscosity materials
Kit, Diffuser Airless
GG 288196
KIT, DIFFUSER AIRLESS
Graco 288196 Ball Seat Diffuser- 3/16 in
Kit, Aircap Assy, H.P.
GG 288194
KIT, AIRCAP ASSY, H.P.
Graco 288194 Standard Air Cap used with AAP, GG4, GG5, and AAM Series
- Compatible Material: Solvents, Paint, Coating, Lubrication-Fluid
Kit, Diffuser Assy
GG 288192
KIT, DIFFUSER ASSY
Graco 288192 Diffuser-Seat, carbide seat, standard viscosity/standard flow
Manifold, Bottom Inlet (In)
GG 288221
MANIFOLD, BOTTOM INLET (IN)
Graco 288221 Manifold with bottom fluid ports
Manifold, Adjustable, Delta, High Prs
GG 288224
MANIFOLD, ADJUSTABLE,DELTA,HIGH PRS
Graco 288224 High Pressure Air Assisted Manifold with side fluid ports and manual fan adjustment valve
Manifold, Side Inlet (In)
GG 288217
MANIFOLD, SIDE INLET (IN)
Graco 288217 North America Manifold with Side Fluid Ports
REGULATOR, BACK PRESSURE
GG 288311
REGULATOR, BACK PRESSURE
Graco 288311 Pneumatic Back Pressure Regulator, 20 gpm (75 lpm), 300 psi (20.6 bar) max fluid pressure, 1-1/2 npt
- PTFE/Elastomer hybrid diaphragm withstands wear while maintaining accurate responsiveness
- Stainless steel wetted materials are compatible with catalyst and waterborne materials
- Hardened stainless steel seat ensure low wear and long life
- Air operated for remote automated control to eliminate operator interference
- Compatible Material: Catalyst, Waterborne
- Gauge Port Size (cm): 0.635
- Gauge Port Size (in): 1/4
- Gauge Port Size (mm): 6.35
- Gauge Port Type: NPT
- Includes: Gauge
- Inlet Size (cm): 3.81
- Inlet Size (in): 1-1/2
- Inlet Size (mm): 38.1
- Inlet Thread Type: NPT
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 70
- Maximum Air Inlet Pressure (psi): 100
- Maximum Flow Rate (GPM): 20
- Maximum Flow Rate (L/min): 75.7
- Maximum Regulated Pressure (bar): 17.2
- Maximum Regulated Pressure (kPa): 1720
- Maximum Regulated Pressure (psi): 250
- Maximum Viscosity (cP): 1000
- Maximum Working Pressure (bar): 21
- Maximum Working Pressure (kPa): 2100
- Maximum Working Pressure (psi): 300
- Minimum Regulated Pressure (bar): 1.7
- Minimum Regulated Pressure (kPa): 170
- Minimum Regulated Pressure (MPa): 0.017
- Minimum Regulated Pressure (psi): 25
- Outlet Size (cm): 3.81
- Outlet Size (in): 1-1/2
- Outlet Size (mm): 38.1
- Outlet Thread Type: NPT
REGULATOR, BACK PRESSURE
GG 288262
REGULATOR, BACK PRESSURE
Graco 288262 Pneumatic Back Pressure Regulator, 20 gpm (75 lpm), 300 psi (20.6 bar) max fluid pressure, 2 inch tri-clamp
- PTFE/Elastomer hybrid diaphragm withstands wear while maintaining accurate responsiveness
- Stainless steel wetted materials are compatible with catalyst and waterborne materials
- Hardened stainless steel seat ensure low wear and long life
- Air operated for remote automated control to eliminate operator interference
- Compatible Material: Catalyst, Waterborne
- Gauge Port Size (cm): 0.635
- Gauge Port Size (in): 1/4
- Gauge Port Size (mm): 6.35
- Gauge Port Type: NPT
- Includes: Gauge
- Inlet Size (cm): 5.08
- Inlet Size (in): 2
- Inlet Size (mm): 50.8
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 70
- Maximum Air Inlet Pressure (psi): 100
- Maximum Flow Rate (GPM): 20
- Maximum Flow Rate (L/min): 75.7
- Maximum Regulated Pressure (bar): 17.2
- Maximum Regulated Pressure (kPa): 1720
- Maximum Regulated Pressure (psi): 250
- Maximum Viscosity (cP): 1000
- Maximum Working Pressure (bar): 21
- Maximum Working Pressure (kPa): 2100
- Maximum Working Pressure (psi): 300
- Minimum Regulated Pressure (bar): 1.7
- Minimum Regulated Pressure (kPa): 170
- Minimum Regulated Pressure (MPa): 0.017
- Minimum Regulated Pressure (psi): 25
- Outlet Size (cm): 5.08
- Outlet Size (in): 2
- Outlet Size (mm): 50.8
CONTRACTOR GUN, RAC X(PKGD)
GG 288420
CONTRACTOR GUN, RAC X(PKGD)
Contractor Airless Spray Gun, 2 Finger Trigger, RAC X 517 SwitchTip The Contractor Airless Spray Gun is the industry standard for performance and durability. Includes a 2-finger trigger and a RAC X 517 SwitchTip and Guard. Exclusive FlexSeal Needle- Totally enclosed patented design eliminates needle’s exposure to fluid, extends needle life by 70%, and ensures consistent needle shut-off
- Fluid pushes on seal to quickly shut off needle and reduce spitting
- Spring is located outside fluid path for better flow
- Helps eliminate pack out and slow needle shut-off
- Repositioned seat is closer to the tip, eliminating 60% of the dead space
- Less paint left between needle and tip results in less spitting
- Form-fitted handle provides maximum control and comfort
- Detachable trigger guard swings clear of gun handle for easy filter access
- Lightweight design reduces operator fatigue
- Smooth, lightweight trigger pull with simple, thumb-engaged safety lock
- Simply remove the trigger cross pin and unthread front housing to change out needle
- Exclusive dual-seat swivel design reduces sealing friction under pressure, making this the best swivel on the market!
- Filters from the inside out to prevent filter from collapsing
- Interchangeable with all Contractor series guns
FTX GUN, 2FINGER, RAC X 515, PKG
GG 288429
FTX GUN, 2FINGER, RAC X 515, PKG
Contractor FTx Airless Spray Gun, 2 Finger Trigger, RAC X 515 SwitchTip The Contractor FTx Airless Spray Gun is the economical choice for everyday use while delivering the reliability and performance to achieve a professional finish. Includes a 2-finger trigger and a RAC X 515 SwitchTip and Guard. Exclusive FlexSeal Needle- Totally enclosed patented design eliminates needle’s exposure to fluid, extends needle life by 70%, and ensures consistent needle shut-off
- Fluid pushes on seal to quickly shut off needle and reduce spitting
- Spring is located outside fluid path for better flow
- Helps eliminate pack out and slow needle shut-off
- Repositioned seat is closer to the tip, eliminating 60% of the dead space
- Less paint left between needle and tip results in less spitting
- Form-fitted handle provides maximum control and comfort
- Detachable trigger guard swings clear of gun handle for easy filter access
- Lightweight design reduces operator fatigue
- Smooth, lightweight trigger pull with simple, thumb-engaged safety lock
- Simply remove the trigger cross pin and unthread front housing to change out needle
- Exclusive dual-seat swivel design reduces sealing friction under pressure, making this the best swivel on the market!
- Filters from the inside out to prevent filter from collapsing
- Interchangeable with all Contractor series guns
FTX GUN, RAC 5(PKGD)
GG 288431
FTX GUN, RAC 5(PKGD)
Contractor FTx Airless Spray Gun, 4 Finger Trigger, RAC 5 515 SwitchTip The Contractor FTx Airless Spray Gun is the economical choice for everyday use while delivering the reliability and performance to achieve a professional finish. Includes a 4-finger trigger and a RAC 5 515 SwitchTip and Guard. Exclusive FlexSeal Needle- Totally enclosed patented design eliminates needle’s exposure to fluid, extends needle life by 70%, and ensures consistent needle shut-off
- Fluid pushes on seal to quickly shut off needle and reduce spitting
- Spring is located outside fluid path for better flow
- Helps eliminate pack out and slow needle shut-off
- Repositioned seat is closer to the tip, eliminating 60% of the dead space
- Less paint left between needle and tip results in less spitting
- Form-fitted handle provides maximum control and comfort
- Detachable trigger guard swings clear of gun handle for easy filter access
- Lightweight design reduces operator fatigue
- Smooth, lightweight trigger pull with simple, thumb-engaged safety lock
- Simply remove the trigger cross pin and unthread front housing to change out needle
- Exclusive dual-seat swivel design reduces sealing friction under pressure, making this the best swivel on the market!
- Filters from the inside out to prevent filter from collapsing
- Interchangeable with all Contractor series guns
KIT, GUN/HOSE, CONT, RACX, 1/4 X
GG 288489
KIT, GUN/HOSE, CONT, RACX, 1/4 X
Contractor Airless Spray Gun, RAC X LTX 517, BlueMax II Airless Hose 1/4 in x 50 ft, BlueMax II Airless Whip Hose 3/16 in x 3 ft Get up and spraying quickly on everyday applications with industry-proven performance. Keep a spare kit on hand to always be prepared for large projects where dual gun applications are required.Contractor Airless Spray Gun
- The industry standard for performance and durability for over a decade
RAC X LTX 517 SwitchTip
- Provides a 10 inch spray pattern
- Ideal for larger surfaces such as houses/buildings, walls and ceilings
- 100% tested for flow rate
- The lightest, most flexible hoses on the market
- Easy to connect and maintain
- The highest level of performance from the sprayer to the gun
- Contractor Airless Spray Gun
- RAC X LTX 517 SwitchTip and Guard
- 3/8 inch diameter by 50 feet BlueMax II Hose
- 3 foot BlueMax II Whip Hose
Kit, Accessory, Guard, Rac, Aa
GG 288839
KIT, ACCESSORY,GUARD,RAC,AA
Graco 288839 AA RAC Guard for Flat Tip RAC Tip Air Cap Conversion Kit
Sharpe Finex 2 Conventional Gravity Gun, 1.8
GG 288887
Sharpe Finex 2 Conventional Gravity Gun, 1.8KIT, FLTR, SG20/SG PRO, 60 MESH
GG 288749
KIT, FLTR, SG20/SG PRO, 60 MESH
60 Mesh Gun Filter Spray gun filters improve the look of the final finish by removing unwanted debris from the paint. 60 mesh filter is for material such as primer and latex paint. Gun filters help remove debris from the coating protecting the pump, reducing tip clogging and providing a better quality finish Replace the filter if clogged more than 20% Prolong pump life and reduce tip clogging by cleaning and replacing the filter regularly Used for latex, enamels (latex) coatings Clean after every use For use with Graco spray gun models SG10, SG20, SG Pro, SG2 and SG3KIT, GUN/HOSE, CONT, FF, 3/16 X 25'
GG 288501
KIT, GUN/HOSE, CONT, FF, 3/16 X 25'
Contractor Airless Spray Gun, RAC X FF LP 210 & 312, BlueMax II Airless Hose 3/16 in x 25 ft, 10 in Extension, 2-100 Mesh FiltersGet up and spraying quickly on fine finish applications with industry-proven performance. Keep a spare kit on hand to always be prepared for large projects where dual gun applications are required.
Contractor Airless Spray Gun
- The industry standard for performance and durability for over a decade
RAC X FF LP 210 & 312 SwitchTips
- Provides the industry’s best fine finish at the lowest airless spray pressure
- Reduced overspray
- Longer pump life
BlueMax II Airless Hoses
- The lightest, most flexible hoses on the market
- Easy to connect and maintain
- The highest level of performance from the sprayer to the gun
Kit Includes:
- Contractor Airless Spray Gun
- RAC X FF LP 210 and 312 SwitchTips
- BlueMax II Airless Hose 3/16 in x 25 ft
- 10 in Extension
- 2 - 100 Mesh Filters
- Solvent Seal Kit
- Cleaning Brush
Kit, Gun Rebuild, Finex Full Size Gravity
GG 288896
Kit, Gun Rebuild, Finex Full Size GravitySTRAINER, INLET, MAGNUM
GG 288716
STRAINER, INLET, MAGNUM
Inlet Strainer Removes unwanted debris from the paint and reduces tip clogging. Clean and replace the inlet strainer regularly for long pump life and superior finish. Inlet strainer removes debris from the coating protecting the pump, reducing tip clogging and providing a better quality finish Prolong pump life and reduce tip clogging by cleaning and replacing the inlet strainer regularly Damaged or worn inlet strainers can let unwanted debris to enter into the pump Use with Magnum models project painter plus, X5, X7, ProX17, ProX19, ProX17 and ProX19 airless paint sprayersKIT, FLTR, PUMP, 40MESH, MAGNUM
GG 288747
KIT, FLTR, PUMP, 40MESH, MAGNUM
Graco 288747 InstaClean Filter
Removes unwanted debris from the paint and reduces tip plugging to improve finish.
Application: Removes unwanted debris from the paint and reduces tip plugging to improve finish.- Graco insta clean 40 mesh manifold filter provides extra filtration ensuring a better finish
- Form fitted one-way design prevents filter from being inserted incorrectly
- Filter automatically flushes clean when valve pressure is relieved
- Model: InstaClean
- Series: Filter
- For Use With: ProX17 Stand, ProX17 Cart, ProX19 Stand, ProX19 Cart, ProX21 Stand, ProX21 Cart, Magnum A60 ProPlus, Magnum A80 ProPlus, Magnum ProS19 ProPlus, Magnum ProS21 ProPlus
- Overall Depth (cm): 0.9525
- Overall Depth (in): 0.375
- Overall Depth (mm): 9.525
- Overall Height (cm): 4.7625
- Overall Height (in): 1.875
- Overall Height (mm): 47.625
- Overall Width (cm): 0.9525
- Overall Width (in): 0.375
- Overall Width (mm): 9.525
AUTOPLUS GUN, AIRLESS
GG 288554
AUTOPLUS GUN, AIRLESS
Graco 288554 Automatic Airless Gun
Less maintenance and more system uptime
Application: For streaming, spray and extrusion- Durable stainless steel construction, longer life needle and seat construction specifically designed to handle the toughest sealant and adhesive materials
- Lightweight and compact rounded gun design
- Capable of handling high production speeds
- Wide range tip line for a variety of applications
- Capable of handling multiple nozzle sizes for any application
- Lightweight and compact rounded gun design
- Capable of handling high production speeds
- Durable stainless steel construction handles the toughest materials
- Fewer parts means an overall lower cost of repair
- Capable of handling multiple nozzle sizes for any application
- Model: AutoPlus
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Spray, Metering, Regulating
- Connection Type: Threaded
- Flow Control Type: Control
- For Use With: PR70 Refill Kit
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (MPa): 35
- Maximum Working Pressure (psi): 5000
- Mount Location: Reciprocating Arm Rod Mount, Stationary Mount
- Number of Outputs: 1
KIT, REPAIR, GUN, SG20/SGPRO/SG2/SG3
GG 288817
KIT, REPAIR, GUN, SG20/SGPRO/SG2/SG3
Gun Repair Kit for SG2, SG3, SG20, and SGPro Guns The Graco gun repair kit will extend the life of your paint spray gun. Spray gun parts will wear with normal use from the abrasives used in coatings. Keep them in peak working order by replacing the worn parts. Repair kit is needed when the spray gun drips when trigger isn't pulled Replacing the worn parts will improve the fan pattern Gun repair kit is for SG2, SG20, SG3, SG Pro spray paint gun models Includes a gun needle, seat valve and nyloc nutKit, Repair, Air Valve
GG 288858
KIT, REPAIR,AIR VALVE
Graco 288858 Air Valve Repair Kit for Fire-Ball, Monark, and President Air Motors
AIRPRO GUN, PRESSURE, AIR SPRAY, .055 Obsolete
GG 288931
AIRPRO GUN, PRESSURE, AIR SPRAY, .055
Graco 288931 AirPro Air Spray Pressure Feed Gun, Conventional, 0.055 inch (1.4 mm) Nozzle, for General Metal Applications
The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.
- Even material distribution through the spray pattern for optimum coverage
- Improved transfer efficiency through reduced air consumption
- Enhanced atomization through material-specific aircaps
- Ultra-light trigger pull reduces operator muscle stress
- Ergonomic gun handle provides a comfortable grip
- Rounded control knobs for operator comfort
- Optimize spray performance with our cutting edge aircap and nozzle design
- Choose from a wide range of gun models to meet the needs of your specific application
- Model: AirPro
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPSM
- Application: Metal
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
- Feed Type: Pressure Feed
- Fluid Inlet Size (cm): 0.9525
- Fluid Inlet Size (in): 3/8
- Fluid Inlet Size (mm): 9.525
- Fluid Inlet Thread Type: NPSM
- Fluid Orifice Size (cm): 0.14
- Fluid Orifice Size (in): 0.055
- Fluid Orifice Size (mm): 1.4
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Conventional Gun
- Gun Weight (g): 410
- Gun Weight (kg): 0.41
- Gun Weight (lb): 0.9
- Gun Weight (oz): 14.46
- Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 21
- Maximum Fluid Pressure (kPa): 2100
- Maximum Fluid Pressure (MPa): 2.1
- Maximum Fluid Pressure (psi): 300
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Maximum Fluid Pressure (bar): 21
- Maximum Fluid Pressure (kPa): 2100
- Maximum Fluid Pressure (MPa): 2.1
- Maximum Fluid Pressure (psi): 300
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Product Type: Spray Gun
AIRPRO GUN, PRESSURE, HVLP, .020 Obsolete
GG 288935
AIRPRO GUN, PRESSURE, HVLP, .020
Graco 288935 AirPro Air Spray Pressure Feed Gun, HVLP, 0.020 inch (0.5 mm) Nozzle, for General Metal Applications
The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.
- Even material distribution through the spray pattern for optimum coverage
- Improved transfer efficiency through reduced air consumption
- Enhanced atomization through material-specific aircaps
- Ultra-light trigger pull reduces operator muscle stress
- Ergonomic gun handle provides a comfortable grip
- Rounded control knobs for operator comfort
- Optimize spray performance with our cutting edge aircap and nozzle design
- Choose from a wide range of gun models to meet the needs of your specific application
- Model: AirPro
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPSM
- Application: Metal
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
- Component Type: Two Component
- Feed Type: Pressure Feed
- Fluid Orifice Size (cm): 0.051
- Fluid Orifice Size (in): 0.020
- Fluid Orifice Size (mm): 0.5
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: HVLP Gun
- Gun Weight (g): 410
- Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 21
- Maximum Fluid Pressure (kPa): 2100
- Maximum Fluid Pressure (MPa): 2.1
- Maximum Fluid Pressure (psi): 300
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Maximum Fluid Pressure (bar): 21
- Maximum Fluid Pressure (kPa): 2100
- Maximum Fluid Pressure (MPa): 2.1
- Maximum Fluid Pressure (psi): 300
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Minimum Flow Rate @ PSI (oz/min): 4
- Product Type: Spray Gun
AIRPRO GUN, PRESSURE, COMPLIANT, .020 Obsolete
GG 288942
AIRPRO GUN, PRESSURE, COMPLIANT, .020
Graco 288942 AirPro Air Spray Pressure Feed Gun, Compliant, 0.020 inch (0.5 mm) Nozzle, for General Metal Applications
The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.
- Even material distribution through the spray pattern for optimum coverage
- Improved transfer efficiency through reduced air consumption
- Enhanced atomization through material-specific aircaps
- Ultra-light trigger pull reduces operator muscle stress
- Ergonomic gun handle provides a comfortable grip
- Rounded control knobs for operator comfort
- Optimize spray performance with our cutting edge aircap and nozzle design
- Choose from a wide range of gun models to meet the needs of your specific application
- Model: AirPro
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPSM
- Application: Metal
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
- Feed Type: Pressure Feed
- Fluid Inlet Size (cm): 0.9525
- Fluid Inlet Size (in): 3/8
- Fluid Inlet Size (mm): 9.525
- Fluid Inlet Thread Type: NPSM
- Fluid Orifice Size (cm): 0.05
- Fluid Orifice Size (in): 0.020
- Fluid Orifice Size (mm): 0.5
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Compliant Gun
- Gun Weight (g): 410
- Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 21
- Maximum Fluid Pressure (kPa): 2100
- Maximum Fluid Pressure (MPa): 2.1
- Maximum Fluid Pressure (psi): 300
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Maximum Fluid Pressure (bar): 21
- Maximum Fluid Pressure (kPa): 2100
- Maximum Fluid Pressure (MPa): 2.1
- Maximum Fluid Pressure (psi): 300
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Minimum Flow Rate @ PSI (oz/min): 4
- Product Type: Spray Gun