DYNABRADE INC. S12699

DY 52060

.4 hp, Straight-Line, 200-950 RPM, Rear Exhaust, 5/8in (16 mm) or 1in (25 mm) Diameter Arbor

Dyninger Air-Powered Abrasive Finishing Tool for sanding, defuzzing, blending, scuffing, denibbing.

950 RPM, .4 hp. High torque air motor includes arbor (1in Diameter) for mounting up to six coated abrasive stars, 8in diameter with 1in center hole. (Stars sold separately.)

• HP: 0.4
• Max. RPM: 950.0
• Motor RPM: 950

DY 52257

18,000 RPM, Gearless, Front Exhaust, 1/4in and 6mm Collets

Includes 1/4in Collet Insert (50013), fits optional 1/8in (50065), 3/8in (50014), 6 mm (50016), 8 mm (50039)

Gearless for reduced maintenance and downtime.

• HP: 0.7
• Max. RPM: 18000.0
• Motor RPM: 18000

DY 52090

DY 52132

DY 51927

DY 51700

60,000 RPM, Turbine Air Motor, Rear Exhaust, 1/8in Collet

Tool has integrated collet with 1/8in Collet Insert (51659)

Turbine-Driven Air Motor Models are ideal for precision deburring and finishing on a variety of surfaces. High-efficiency air motor has no wearable gears, vanes or blades. Oil-free operation minimizes maintenance time and repair costs. Air motor is controlled with patented governor, providing constant tool speed under load. Quality high-speed bearings are included.

• HP: 0.1
• Max. RPM: 60000.0
• Motor RPM: 60000

DY 52211

18,000 RPM, Gearless, Front Exhaust, Short Shank, 1/4in and 6mm Collets

High-Quality Air-powered Die Grinder 7 Degree Offset, Short Shank, Gearless, Front Exhaust

Gearless for reduced maintenance and downtime.

• HP: 0.5
• Max. RPM: 18000.0
• Motor RPM: 18000

DY 52412

.7 hp, 20,000 RPM, Gearless, Front Exhaust, Locking-Type Female Pad

High-Quality Air-Powered Disc Sanders

Includes 51347 Locking-Type Pad (3in diameter).

• HP: 0.7
• Max. RPM: 20000.0
• Motor RPM: 20000

DY 52573

1 hp, 15,000 RPM, Rear Exhaust, 3/8in -24 Spindle Thread

Cut-Off Wheel Tool, for efficient cutting of sheet metal, frame rails, clamps, bolts, etc.

4in Diameter, Straight Line, 1 hp, Rear Exhaust, 15,000 RPM.

• HP: 1.0
• Max. RPM: 15000.0
• Motor RPM: 15000

DY 52557

.55 hp, 15,000 RPM, Gearless, Extended Rear Exhaust, Locking-Type Female Pad

Includes 51347 Locking-Type Pad (3in diameter).

Optional safety-lock lever available. Tool combines top efficiency with great value.

• HP: 0.55
• Max. RPM: 15000.0
• Motor RPM: 15000

DY 52431

.7 hp, 20,000 RPM, Front Exhaust, 3/8in -24 Spindle Thread

Cut-Off Wheel Tool, for efficient cutting of sheet metal, frame rails, clamps, bolts, etc.

4in Diameter, 7 Degrees Offset, .7 hp, 3/8in -24 Spindle

• HP: 0.7
• Max. RPM: 20000.0
• Motor RPM: 20000

DY 52579

1 hp, 15,000 RPM, Rear Exhaust, 3/8in -24 Spindle Thread

Cut-Off Wheel Tool, for efficient cutting of sheet metal, frame rails, clamps, bolts, etc.

4in Diameter, Straight Line, 1 hp, 6in Extension, 15,000 RPM.

• HP: 1.0
• Max. RPM: 15000.0
• Motor RPM: 15,000

DY 52590

.33 hp, 18,000 RPM, Gearless, Rear Exhaust, Locking-Type Female Pad

Includes 51345 Locking-Type Pad (2in diameter). Also accepts 3in diameter disc pads, sold separately.

Features standard muffler for more compact design. Tool combines top efficiency with great value.

• HP: 0.33
• Max. RPM: 18000.0
• Motor RPM: 18,000

DY 52413

.7 hp, 15,000 RPM, Gearless, Rear Exhaust, Locking-Type Female Pad

High-Quality Air-Powered Disc Sanders

Includes 51347 Locking-Type Pad (3in diameter).

• HP: 0.7
• Max. RPM: 15000.0
• Motor RPM: 15000

DY 93801

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 93958

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 93785

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 93988

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 93995

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 93890

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 93803

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 93891

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 93879

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 93662

The hardest mineral is a must for cutting and finishing materials harder than 60 Rockwell C such as thermal sprayed tungsten carbide, chrome oxide, glass, composites, stone, chilled iron and forged steel.

Excellent for cutting and trimming fiberglass and composite mold -flashing

DY 93999

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 93875

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 94507

Composite Hub, 5/8in Bore, For 3in (76 mm) W x 10-11/16in (271 mm) L Belt

DY 93798

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 94578

DY 94532

DY 94912

1/8in (3 mm) Thick, For Tools with 3/8in DiameterSpindles

The hardest mineral is a must for cutting and finishing materials harder than 60 Rockwell C such as thermal sprayed tungsten carbide, chrome oxide, glass, composites, stone, chilled iron and forged steel.

Excellent for cutting and trimming fiberglass and composite mold -flashing

DY 94875

Whip Hose

DY 94924

DY 94949

DY 95042

DY 95164

DY 95168

DY 95183

DY 95178

DY 95186

DY 95314

DY 95417

DY 95460

Swivels 360 degrees at two pivot points allowing the air hose to drop directly to the floor.

DY 95552

DY 95556

DY 95557

DY 95562

DY 95572

DY 95676

-- ONLY USE DYNABRADE COUPLERS WITH DYNABRADE PLUGS

DY 95865

DY 95886

DY 95939

DY 96080

DY 96100

DY 96156

DY 96166

DY 96173

DY 96234

DY 96260

DY 96313

DY 96272

DY 96477

DY 97556

DY 97152

DY 97405

DY 98267

-- ONLY USE DYNABRADE COUPLERS WITH DYNABRADE PLUGS

DY 98269

-- ONLY USE WITH DYNABRADE P/N 98271 OR 98272 PLUG

DY 98287

DY DS53

.5 hp, 14,000 RPM, Rotational Side Exhaust, TR Locking Female Pad

Compact, lightweight contemporary tool design permits easy access to tight areas

Thermoplastic rubber tool grip reduces cold air transmission and absorbs vibration

• HP: 0.5
• Max. RPM: 14000.0
• Motor RPM: 14,000

DY DYS1

800-3,000 RPM, 120 V (AC), 9 Amp, 1 Phase, 60 Hz, 3/4in (19 mm) Diameter Arbor

The Dynabrade Nitro Series Electric Dynisher will give the user the professional results they desire. This powerful tool is excellent for blending and finishing stainless steel leaving an in-line scratch pattern. Additionally, it is perfect for use on other metals, as well as plastics, composites and more.

New lower center-of-gravity makes it easier to control the tool and keep the line grain straight. Compact, right angle tool configuration with spindle lock for quick wheel changes. Multi purpose arbor accepts Dynacushion Pneumatic Wheel and Non-Woven Nylon Wheels.

• Motor RPM: 3,000

DY EB3

3/8in -24 Spindle, .5hp

Compact, lightweight contemporary tool design

Thermoplastic rubber tool grip reduces cold air transmission and absorbs vibration

• HP: 0.5
• Max. RPM: 2700.0
• Motor RPM: 2,700

DY MNF1

.4 hp, 7 Degree Offset Handle, Gearless, 1/2in wide x 12in length belts

ldeal for strap polishing and working in narrow openings. Sand and deburr in tight spots.

Lightweight ergonomic design handle features 7 degree offset. Multi-position grinding head pivots 360 Degree

• HP: 0.4
• Max. RPM: 25000.0
• Motor RPM: 25,000

DY 98243

DY 98224

DY DN1

Rear Exhaust, For 1/4in -20 Female Thread Type Pad

Very low vibration reduces hand and arm fatigue providing ultimate results to sensitive workpieces or when sanding/repairing a coated surface.

Ultra-lightweight, at just 1 pound (.45 kg) with small ergonomic pistol grip design, the Mini Orbital Sander reduces the likelihood of repetitive motion injuries during extended use.

• HP: .02 (15)
• Max. RPM: 8500

DY NS11

0-2,800 RPM, 1 hp, 3/4in (19 mm) Diameter Orbit

The Dynabrade Nitro Series&trade. 11in Diameter Random Orbital Sander will give the user the professional results they desire. This powerful tool with proportionate 3/4in diameter orbit assures a swirl-free finish on a variety of surfaces. Additionally, it is perfect to quickly remove heavy oxidation and correct surface imperfections on large areas.

Powerful 1 hp, 2,800 RPM motor offers high torque and power, 43% higher hp than previous model. The sander weight/balance allows the operator to let the tool do the work on large horizontal surfaces. Soft grip insulated handle reduces cold air transmission to the operator.

• HP: 1.0
• Max. RPM: 2800.0
• Motor RPM: 2,800

DY NZ1

.5 hp, Right Angle, 3,500 RPM, Rear Exhaust

Using the Dynabrade Nitro Series&trade. NitroZip Surface Preparation Tool equipped with a wire wheel allows technicians to remove rust and seam sealers in preparation for repair or replacement of damaged vehicle components. The NitroZip removes adhesive-backed decals and lettering without damaging the clear and paint below. NZ1 includes Standard Tool, 92239 3/4in Wheel Hub Assembly and 92255 RED-TRED®. Zip Eraser Wheel. Accessories sold separately: 92252 1/2in Wheel Hub Assembly, 92248 1/2in Coarse Wire Wheel, 92245 3/4in Coarse Wire Wheel.

Using an eraser wheel the Dynabrade Nitro Series&trade. NitroZip quickly removes decals without harming the paint, as well as removing adhesives without smearing on the painted surface. Excellent for removing two-sided adhesive molding tape and decal material with use of rubber eraser wheel Eraser Wheel has serrations for improved cooling effect air flow. Also resists heat buildup and reduces jumping and vibration

• HP: 0.5
• Max. RPM: 3500.0
• Motor RPM: 20,000

DY 96539

DY 98220

DY 96627

DY 96624

DY RB3

800 - 3,000 RPM, 110 V, 1000 Watt, 5/8in -11 Spindle Thread

Powerful 1000-watt motor is well suited detail applications

Well balanced, right angle tool configuration provides easy operator control Thumb controlled variable speed dial offers six speed selection options between 800 - 3000 RPM

DY 96776

DY 96425

DY 98288

DY 98265

-- ONLY USE DYNABRADE COUPLERS WITH DYNABRADE PLUGS

DY 97530

DY 96538

DY 97441

DY 97311

DY 97995

DY NZ1K

.5 hp, Right Angle, 3,500 RPM, Rear Exhaust

Using the Dynabrade Nitro Series&trade. NitroZip Surface Preparation Tool equipped with a wire wheel allows technicians to remove rust and seam sealers in preparation for repair or replacement of damaged vehicle components. When equipped with an eraser wheel the NitroZip removes adhesive-backed decals and lettering without damaging the clear and paint below. NZ1K INCLUDES: NZ1 Standard Tool, 92252 1/2in Wheel Hub Assembly (1), 92248 1/2in Coarse Wire Wheel (1), 92239 3/4in Wheel Hub Assembly (1), 92245 3/4in Coarse Wire Wheel (1), 92255 RED-TRED®. Zip Eraser Wheel (1)

Using an eraser wheel the Dynabrade Nitro Series&trade. NitroZip quickly removes decals without harming the paint, as well as removing adhesives without smearing on the painted surface. Excellent for removing two-sided adhesive molding tape and decal material with use of rubber eraser wheel Eraser Wheel has serrations for improved cooling effect air flow. Also resists heat buildup and reduces jumping and vibration

DY 96602

DY RS1

Straight Line, 3/8in Stroke Length, 9,000 SPM

The perfect tool for cutting materials such as plastics, fiberglass, composites, aluminum and sheet metal

Small, lightweight design provides greater accessibility and increases operator productivity

DY 97022

DY X31

.1 hp, 12,000 RPM, 3/16in (5 mm) Diameter Orbit, Rear Exhaust, Hook Pad

Integrated speed control allows for fine adjustment of RPM for artistic results, sensitive workpieces, or when sanding/repairing a coated surface.

Ultra-lightweight, just over 1 pound (.5 kg) - 35% lighter when compared to 5" and 6" Dynorbital®. Extreme. Reduces fatigue and the likelihood of repetitive motion injuries during extended use.

• HP: 0.1
• Motor RPM: 12,000

DY X3151H

12,000 RPM, 3/16in (5 mm) Diameter, Rear Exhaust

DY X3161H

12,000 RPM, 3/16in (5 mm) Diameter, Rear Exhaust

DY X3161V

12,000 RPM, 3/16in (5 mm) Diameter, Rear Exhaust

DY X31V

.1 hp, 12,000 RPM, 3/16in (5 mm) Diameter Orbit, Rear Exhaust, Hook Pad

Integrated speed control allows for fine adjustment of RPM for artistic results, sensitive workpieces, or when sanding/repairing a coated surface.

Ultra-lightweight, just over 1 pound (.5 kg) - 35% lighter when compared to 5" and 6" Dynorbital®. Extreme. Reduces fatigue and the likelihood of repetitive motion injuries during extended use.

• HP: 0.1
• Motor RPM: 12,000