Transfer
CHECK-MATE PUMP, 20:1 700/060 LW NS CS SD
GG P20LCS
CHECK-MATE PUMP, 20:1 700/060 LW NS CS SD
Graco P20LCS 20:1 - 60cc Check-Mate Pump with NXT 700 Air Motor, Severe Duty Carbon Steel Construction
Graco Supply Pumps reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials to metering and dispensing systems. Maximize your plant&prime, s production capacity.
Application: Long-lasting durability - Check-Mate pumps are a time-tested, proven performer- NXT 700 Air Motor
Low Noise
Modular design for easier maintenance
Highest technology air motor on the market
- 60cc Check-Mate Lower
Severe Duty coatings on rods and cylinder Extends production time
- Xtreme Coupler - No tool connection
Quick-disconnect coupler for easy maintenance
- Replaceable Seat
Minimizes service costs
- Cast Outlet and Inlet Housing
- NEW Xtreme® Coupler
- Replaceable Outlet Fitting
- Piston Valve with Floating Piston Seal
- Replaceable Seat
- Floating Priming Plate
- Cast Outlet and Inlet Housing
- NEW Cartridge Throat Packings
- Modular Air Valve
- Hard Part Coatings
Standard Severe Duty™ coating on rods and cylinder maximizes wear life
- Model: Check-Mate
- Ambient/Warm Melt/Hot Melt: Ambient
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
- Fluid Outlet Size (in): 3/4
- Fluid Outlet Thread Gender: Male
- Fluid Outlet Thread Type: NPT
- Includes: Motor, Displacement Pump, Washer Lock (6), Screw
- Material: Carbon Steel
- Maximum Working Pressure (bar): 138
- Maximum Working Pressure (kPa): 13800
- Maximum Working Pressure (MPa): 13.8
- Maximum Working Pressure (psi): 2000
- Power Type: Pneumatic
- Pump Ratio: 20:1
De-icing controls
Up to 50% quieter than previous models
Modular air valve - eliminates stalling, easy-to-repair
- Hard Part Coatings
Allows for easy servicing without removing from ram
- Modular Air Valve
Improves structural integrity
- NEW Cartridge Throat Packings
Provides uniform flow
- Cast Outlet and Inlet Housing
Minimizes service costs
- Floating Priming Plate
For maximum pressure balance over a range of material viscosities
- Replaceable Seat
Reduces repair costs
- Piston Valve with Floating Piston Seal
Quick-disconnect coupler for easy maintenance
- Replaceable Outlet Fitting
Improves structural integrity
- NEW Xtreme® Coupler
DURA-FLO PUMP, 6500/580
GG P22LSM
DURA-FLO PUMP, 6500/580
21:1 - 580cc Dura-Flo Pump with NXT6500 Air Motor, MaxLife Stainless Steel ConstructionGraco’s Xtreme and Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.
Positive displacement, 2 ball piston design provides uniform and easily controlled delivery High pump pressure and flow performance to handle a broad range of paints and coatings Improved serviceability with fewer parts, faster repairs and lower ownership costNXT Air Motor
- Modular design for easier maintenance
- Rugged body armor won’t rust or dent
- Highest technology air motor on the market
- Low Noise exhaust style
Modular Air Valve
- De-icing controls standard
- Up to 50% quieter than previous models
- Modular air valve - reduces stalling, easy-to-repair
Optional Integrated Air Controls
- Lockable easy-turn regulator
- Front-mounted for convenient access
- Compact and modular
- Built-in filtration
Optional DataTrak™ Control
- Runaway protection
- Pump diagnostics
- Material usage
DURA-FLO PUMP, 6500/580
GG P23DSA
DURA-FLO PUMP, 6500/580
Dura-Flo NXT 2-Ball Piston Pump, 23:1, Low Noise Exhaust Motor, SST, 3 UHMW / 2 PTFE PackingsGraco’s Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.
Positive displacement, 2 ball piston design provides uniform and easily controlled delivery High pump pressure and flow performance to handle a broad range of paints and coatings Improved serviceability with fewer parts, faster repairs and lower ownership cost Monitor and protect your pump with DataTrak
DURA-FLO PUMP, 6500/580
GG P23ESA
DURA-FLO PUMP, 6500/580
Dura-Flo NXT 2-Ball Piston Pump, 23:1, Low Noise Exhaust Motor, DataTrak, SST, 3 UHMW / 2 PTFE PackingsGraco’s Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.
Positive displacement, 2 ball piston design provides uniform and easily controlled delivery High pump pressure and flow performance to handle a broad range of paints and coatings Improved serviceability with fewer parts, faster repairs and lower ownership cost Monitor and protect your pump with DataTrak
DURA-FLO PUMP, 6500/580
GG P23MCD
DURA-FLO PUMP, 6500/580
Graco P23MCD Dura-Flo NXT 2-Ball Piston Pump, 23:1, Low Noise Exhaust Motor, DataTrak, CS, 3 PTFE / 2 Leather Packings
Graco’s Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.
- Positive displacement, 2 ball piston design provides uniform and easily controlled delivery
- High pump pressure and flow performance to handle a broad range of paints and coatings
- Improved serviceability with fewer parts, faster repairs and lower ownership cost
- Model: Dura-Flo
- Series: 2-Ball
- Application: Supply
- Compatible Material: Solvent borne, High Solids, Xirallic, CARC, Metallics, Stains, Varnish
- Fluid Outlet Size (in): 1-1/2
- Fluid Outlet Size (mm): 38.1
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Type: 2-Ball
- Includes: Carbon Steel Pump, Low Noise Exhaust Motor, DataTrak Monitor, 3 PTFE/2 Leather Packings
- Material: Carbon Steel
- Maximum Air Inlet Pressure (bar): 6.9
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Continuous Cycle Rate (CPM): 60
- Maximum Flow Rate (GPM): 9.2
- Maximum Flow Rate (L/min): 34.83
- Maximum Operating Temperature (°C): 66
- Maximum Operating Temperature (°F): 150
- Maximum Working Pressure (bar): 164
- Maximum Working Pressure (kPa): 16400
- Maximum Working Pressure (MPa): 16.4
- Maximum Working Pressure (psi): 2380
- Motor Type: Low Noise NXT with DataTrak
- Mount Type: Wall or Stand Mount
- Portable: Non-Portable
- Pump Ratio: 23:1
XTREME PUMP, 3400/290, NF
GG P25DC1
XTREME PUMP, 3400/290, NF
Xtreme NXT 2-Ball Piston Pump, 25:1, De-Icing Exhaust Motor, CSGraco's Xtreme pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.
Positive displacement, 2 ball piston design provides uniform and easily controlled delivery High pump pressure and flow performance to handle a broad range of paints and coatings Improved serviceability with fewer parts, faster repairs and lower ownership cost Monitor and protect your pump with DataTrak
XTREME PUMP, 3400/290, NF, AC
GG P25DC3
XTREME PUMP, 3400/290, NF, AC
Graco P25DC3 Xtreme NXT 2-Ball Piston Pump, 25:1, De-Icing Exhaust Motor, CS, Air Controls
Graco&prime, s Xtreme pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.
- Positive displacement, 2 ball piston design provides uniform and easily controlled delivery
- High pump pressure and flow performance to handle a broad range of paints and coatings
- Improved serviceability with fewer parts, faster repairs and lower ownership cost
- Model: Xtreme
- Series: 2-Ball
- Air Inlet Size (in): 3/4
- Air Inlet Size (mm): 19.05
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Supply
- Compatible Material: Solvent borne, High Solids, Xirallic, CARC, Metallics, Stains, Varnish
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Type: 2-Ball
- Includes: Carbon Steel Pump, De-Icing Exhaust Motor, Air Controls
- Material: Carbon Steel
- Maximum Air Inlet Pressure (bar): 6.9
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Flow Rate (GPM): 4.6
- Maximum Flow Rate (L/min): 17.41
- Maximum Operating Temperature (°C): 82
- Maximum Operating Temperature (°F): 180
- Maximum Working Pressure (bar): 209
- Maximum Working Pressure (kPa): 20900
- Maximum Working Pressure (MPa): 20.9
- Maximum Working Pressure (psi): 3030
- Motor Type: De-Icing NXT
- Mount Type: Wall or Stand Mount
- Portable: Non-Portable
- Pump Ratio: 25:1
XTREME PUMP, 3400/290, NF
GG P25LC1
XTREME PUMP, 3400/290, NF
Graco P25LC1 Xtreme NXT 2-Ball Piston Pump, 25:1, Low Noise Exhaust, CS
Graco&prime, s Xtreme pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.
- Positive displacement, 2 ball piston design provides uniform and easily controlled delivery
- High pump pressure and flow performance to handle a broad range of paints and coatings
- Improved serviceability with fewer parts, faster repairs and lower ownership cost
- Model: Xtreme
- Series: 2-Ball
- Air Inlet Size (in): 3/4
- Air Inlet Size (mm): 19.05
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Supply
- Compatible Material: Solvent borne, High Solids, Xirallic, CARC, Metallics, Stains, Varnish
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Type: 2-Ball
- Includes: Carbon Steel Pump, Low Noise Exhaust Motor
- Material: Carbon Steel
- Maximum Air Inlet Pressure (bar): 6.9
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Continuous Cycle Rate (CPM): 60
- Maximum Flow Rate (GPM): 4.6
- Maximum Flow Rate (L/min): 17.41
- Maximum Operating Temperature (°C): 82
- Maximum Operating Temperature (°F): 180
- Maximum Working Pressure (bar): 262
- Maximum Working Pressure (kPa): 26200
- Maximum Working Pressure (MPa): 26.2
- Maximum Working Pressure (psi): 3800
- Motor Type: Low Noise NXT
- Mount Type: Wall or Stand Mount
- Portable: Non-Portable
- Pump Ratio: 25:1
DURA-FLO PUMP, 3400/290
GG P25LSE
DURA-FLO PUMP, 3400/290
Graco P25LSE Dura-Flo NXT 2-Ball Piston Pump, 25:1, Low Noise Exhaust Motor, SST, 4 Leather / 1 PTFE Packings
Graco’s Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.
- Positive displacement, 2 ball piston design provides uniform and easily controlled delivery
- High pump pressure and flow performance to handle a broad range of paints and coatings
- Improved serviceability with fewer parts, faster repairs and lower ownership cost
- Model: Dura-Flo
- Series: 2-Ball
- Application: Supply
- Compatible Material: Solvent borne, High Solids, Xirallic, CARC, Metallics, Stains, Varnish
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Type: 2-Ball
- Includes: Stainless Steel Pump, Low Noise Exhaust Motor, 4 Leather/1 PTFE Packings
- Material: Stainless Steel
- Maximum Air Inlet Pressure (bar): 6.9
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Continuous Cycle Rate (CPM): 60
- Maximum Flow Rate (GPM): 4.6
- Maximum Flow Rate (L/min): 17.41
- Maximum Operating Temperature (°C): 66
- Maximum Operating Temperature (°F): 150
- Maximum Working Pressure (bar): 314
- Maximum Working Pressure (kPa): 31400
- Maximum Working Pressure (MPa): 31.4
- Maximum Working Pressure (psi): 4550
- Motor Type: Low Noise NXT
- Mount Type: Wall or Stand Mount
- Portable: Non-Portable
- Pump Ratio: 25:1
DURA-FLO PUMP, 3400/290
GG P25MSE
DURA-FLO PUMP, 3400/290
Graco P25MSE Dura-Flo NXT 2-Ball Piston Pump, 25:1, Low Noise Exhaust Motor, DataTrak, SST, 4 Leather / 1 PTFE Packings
Graco’s Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.
- Positive displacement, 2 ball piston design provides uniform and easily controlled delivery
- High pump pressure and flow performance to handle a broad range of paints and coatings
- Improved serviceability with fewer parts, faster repairs and lower ownership cost
- Model: Dura-Flo
- Series: 2-Ball
- Application: Supply
- Compatible Material: Solvent borne, High Solids, Xirallic, CARC, Metallics, Stains, Varnish
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Type: 2-Ball
- Includes: Stainless Steel Pump, Low Noise Exhaust Motor, DataTrak Monitor, 4 Leather/1 PTFE Packings
- Material: Stainless Steel
- Maximum Air Inlet Pressure (bar): 6.9
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Continuous Cycle Rate (CPM): 60
- Maximum Flow Rate (GPM): 4.6
- Maximum Flow Rate (L/min): 17.41
- Maximum Operating Temperature (°C): 66
- Maximum Operating Temperature (°F): 150
- Maximum Working Pressure (bar): 328
- Maximum Working Pressure (kPa): 32800
- Maximum Working Pressure (MPa): 32.8
- Maximum Working Pressure (psi): 4750
- Motor Type: Low Noise NXT with DataTrak
- Mount Type: Wall or Stand Mount
- Portable: Non-Portable
- Pump Ratio: 25:1
DURA-FLO PUMP, 3400/220
GG P30DSE
DURA-FLO PUMP, 3400/220
Graco P30DSE Dura-Flo NXT 2-Ball Piston Pump, 30:1, De-Icing Exhaust Motor, SST, 4 Leather / 1 PTFE Packings
Graco’s Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.
- Positive displacement, 2 ball piston design provides uniform and easily controlled delivery
- High pump pressure and flow performance to handle a broad range of paints and coatings
- Improved serviceability with fewer parts, faster repairs and lower ownership cost
- Model: Dura-Flo
- Series: 2-Ball
- Air Inlet Size (in): 0.7506
- Air Inlet Size (mm): 19.05
- Application: Supply
- Compatible Material: Solvent borne, High Solids, Xirallic, CARC, Metallics, Stains, Varnish
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Type: 2-Ball
- Includes: Stainless Steel Pump, De-Icing Exhaust Motor, 4 Leather/1 PTFE Packings
- Material: Stainless Steel
- Maximum Air Inlet Pressure (bar): 6.9
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Continuous Cycle Rate (CPM): 60
- Maximum Flow Rate (GPM): 3.4
- Maximum Flow Rate (L/min): 12.87
- Maximum Operating Temperature (°C): 66
- Maximum Operating Temperature (°F): 150
- Maximum Working Pressure (bar): 105
- Maximum Working Pressure (kPa): 10500
- Maximum Working Pressure (MPa): 10.5
- Maximum Working Pressure (psi): 1520
- Motor Type: De-Icing NXT
- Mount Type: Wall or Stand Mount
- Portable: Non-Portable
- Pump Ratio: 30:1
DURA-FLO PUMP, 3400/220
GG P30LSE
DURA-FLO PUMP, 3400/220
Dura-Flo NXT 2-Ball Piston Pump, 30:1, Low Noise Exhaust Motor, SST, 4 Leather / 1 PTFE PackingsGraco’s Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.
Positive displacement, 2 ball piston design provides uniform and easily controlled delivery High pump pressure and flow performance to handle a broad range of paints and coatings Improved serviceability with fewer parts, faster repairs and lower ownership cost Monitor and protect your pump with DataTrak
DURA-FLO PUMP, 3400/220
GG P30LSS
DURA-FLO PUMP, 3400/220
Graco P30LSS 30:1 - 220cc Dura-Flo Pump with NXT 3400 Air Motor, Severe Duty Stainless Steel Construction
Graco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plant&prime, s production capacity.
Application: Long-lasting durability - Dura-Flo pumps are a time-tested, proven performer- NXT 3400 Air Motor
Modular design for easier maintenance
Rugged body armor won&prime, t rust or dent
Highest technology air motor on the market
- 220cc Dura-Flo Lower
Severe Duty coatings on rods and cylinder Extends production time
- Standard Threaded Coupler -
- Replaceable Seat
Minimizes service costs
- Cast Outlet and Inlet Housing
- Optional DataTrak™ Control
Runaway protection
Pump diagnostics
Material usage
- Model: Dura-Flo
- Ambient/Warm Melt/Hot Melt: Ambient
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
- Compatible Material: CARC, High Solids, Metallics, Solvent borne, Stains, Varnish, Xirallic
- Fluid Inlet Size (in): 2
- Fluid Inlet Size (mm): 50.8000
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4000
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Includes: Motor, Lower, Rod Tie, Collar Coupling, Adaptor, Nut Coupling, Nut Hex, Wrench
- Material: Stainless Steel
- Maximum Working Pressure (bar): 219
- Maximum Working Pressure (kPa): 21900
- Maximum Working Pressure (MPa): 21.9
- Maximum Working Pressure (psi): 3170
- Power Type: Pneumatic
- Pump Ratio: 30:1
Improves structural integrity
- Optional DataTrak™ Control
DURA-FLO PUMP, 3400/220
GG P30MSE
DURA-FLO PUMP, 3400/220
Graco P30MSE Dura-Flo NXT 2-Ball Piston Pump, 30:1, Low Noise Exhaust Motor, DataTrak, SST, 4 Leather / 1 PTFE Packings
Graco’s Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.
- Positive displacement, 2 ball piston design provides uniform and easily controlled delivery
- High pump pressure and flow performance to handle a broad range of paints and coatings
- Improved serviceability with fewer parts, faster repairs and lower ownership cost
- Model: Dura-Flo
- Series: 2-Ball
- Air Inlet Size (in): 0.7506
- Air Inlet Size (mm): 19.05
- Application: Supply
- Compatible Material: Solvent borne, High Solids, Xirallic, CARC, Metallics, Stains, Varnish
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Type: 2-Ball
- Includes: Stainless Steel Pump, Low Noise Exhaust Motor, DataTrak Monitor, 4 Leather/1 PTFE Packings
- Material: Stainless Steel
- Maximum Air Inlet Pressure (bar): 6.9
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Continuous Cycle Rate (CPM): 60
- Maximum Flow Rate (GPM): 3.4
- Maximum Flow Rate (L/min): 12.87
- Maximum Operating Temperature (°C): 66
- Maximum Operating Temperature (°F): 150
- Maximum Working Pressure (bar): 105
- Maximum Working Pressure (kPa): 10500
- Maximum Working Pressure (MPa): 10.5
- Maximum Working Pressure (psi): 1520
- Motor Type: Low Noise NXT with DataTrak
- Mount Type: Wall or Stand Mount
- Portable: Non-Portable
- Pump Ratio: 30:1
DURA-FLO PUMP, 6500/430
GG P32ESB
DURA-FLO PUMP, 6500/430
Dura-Flo NXT 2-Ball Piston Pump, 32:1, De-Icing Exhaust Motor, DataTrak, SST, 3 UHMW / 2 Tuffstack PackingsGraco’s Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.
Positive displacement, 2 ball piston design provides uniform and easily controlled delivery High pump pressure and flow performance to handle a broad range of paints and coatings Improved serviceability with fewer parts, faster repairs and lower ownership cost Monitor and protect your pump with DataTrak
DURA-FLO PUMP, 6500/430
GG P32LCD
DURA-FLO PUMP, 6500/430
Dura-Flo NXT 2-Ball Piston Pump, 32:1, Low Noise Exhaust Motor, CS, 3 PTFE / 2 Leather PackingsGraco’s Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.
Positive displacement, 2 ball piston design provides uniform and easily controlled delivery High pump pressure and flow performance to handle a broad range of paints and coatings Improved serviceability with fewer parts, faster repairs and lower ownership cost Monitor and protect your pump with DataTrak
DURA-FLO PUMP, 6500/430
GG P32LSB
DURA-FLO PUMP, 6500/430
Dura-Flo NXT 2-Ball Piston Pump, 32:1, Low Noise Exhaust Motor, SST, 3 UHMW / 2 Tuffstack PackingsGraco’s Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.
Positive displacement, 2 ball piston design provides uniform and easily controlled delivery High pump pressure and flow performance to handle a broad range of paints and coatings Improved serviceability with fewer parts, faster repairs and lower ownership cost Monitor and protect your pump with DataTrak
DURA-FLO PUMP, 6500/430
GG P32MSB
DURA-FLO PUMP, 6500/430
Graco P32MSB Dura-Flo NXT 2-Ball Piston Pump, 32:1, Low Noise Exhaust Motor, DataTrak, SST, 3 UHMW / 2 Tuffstack Packings
Graco’s Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.
- Positive displacement, 2 ball piston design provides uniform and easily controlled delivery
- High pump pressure and flow performance to handle a broad range of paints and coatings
- Improved serviceability with fewer parts, faster repairs and lower ownership cost
- Model: Dura-Flo
- Series: 2-Ball
- Air Inlet Size (in): 0.7506
- Air Inlet Size (mm): 19.05
- Application: Supply
- Compatible Material: Solvent borne, High Solids, Xirallic, CARC, Metallics, Stains, Varnish
- Fluid Outlet Size (in): 1-1/2
- Fluid Outlet Size (mm): 38.1
- Fluid Outlet Thread Gender: Male
- Fluid Outlet Thread Type: NPT
- Fluid Section Type: 2-Ball
- Includes: Stainless Steel Pump, Low Noise Exhaust Motor, DataTrak Monitor, 3 UHMWPE/2 Tuff-Stack Packings
- Material: Stainless Steel
- Maximum Air Inlet Pressure (bar): 6.9
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Continuous Cycle Rate (CPM): 60
- Maximum Flow Rate (GPM): 6.9
- Maximum Flow Rate (L/min): 26.12
- Maximum Operating Temperature (°C): 66
- Maximum Operating Temperature (°F): 150
- Maximum Working Pressure (bar): 164
- Maximum Working Pressure (kPa): 16400
- Maximum Working Pressure (MPa): 16.4
- Maximum Working Pressure (psi): 2380
- Motor Type: Low Noise NXT with DataTrak
- Mount Type: Wall or Stand Mount
- Portable: Non-Portable
- Pump Ratio: 32:1
DURA-FLO PUMP, 3400/180
GG P40DSE
DURA-FLO PUMP, 3400/180
Graco P40DSE Dura-Flo NXT 2-Ball Piston Pump, 40:1, De-Icing Exhaust Motor, SST, 4 Leather / 1 PTFE Packings
Graco’s Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.
- Positive displacement, 2 ball piston design provides uniform and easily controlled delivery
- High pump pressure and flow performance to handle a broad range of paints and coatings
- Improved serviceability with fewer parts, faster repairs and lower ownership cost
- Model: Dura-Flo
- Series: 2-Ball
- Air Inlet Size (in): 0.7506
- Air Inlet Size (mm): 19.05
- Application: Supply
- Compatible Material: Solvent borne, High Solids, Xirallic, CARC, Metallics, Stains, Varnish
- Fluid Outlet Size (in): 3/4
- Fluid Outlet Size (mm): 19.05
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Type: 2-Ball
- Includes: Stainless Steel Pump, De-Icing Exhaust Motor, 4 Leather/1 PTFE Packings
- Material: Stainless Steel
- Maximum Air Inlet Pressure (bar): 6.9
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Continuous Cycle Rate (CPM): 60
- Maximum Flow Rate (GPM): 2.9
- Maximum Flow Rate (L/min): 10.98
- Maximum Operating Temperature (°C): 66
- Maximum Operating Temperature (°F): 150
- Maximum Working Pressure (bar): 164
- Maximum Working Pressure (kPa): 16400
- Maximum Working Pressure (MPa): 16.4
- Maximum Working Pressure (psi): 2380
- Motor Type: De-Icing NXT
- Mount Type: Wall or Stand Mount
- Portable: Non-Portable
- Pump Ratio: 40:1
DURA-FLO PUMP, 6500/290
GG P45LSE
DURA-FLO PUMP, 6500/290
Graco P45LSE Dura-Flo NXT 2-Ball Piston Pump, 45:1, Low Noise Exhaust Motor, SST, 4 Leather / 1 PTFE Packings
Graco’s Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.
- Positive displacement, 2 ball piston design provides uniform and easily controlled delivery
- High pump pressure and flow performance to handle a broad range of paints and coatings
- Improved serviceability with fewer parts, faster repairs and lower ownership cost
- Model: Dura-Flo
- Series: 2-Ball
- Air Inlet Size (in): 0.7506
- Air Inlet Size (mm): 19.05
- Application: Supply
- Compatible Material: Solvent borne, High Solids, Xirallic, CARC, Metallics, Stains, Varnish
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Type: 2-Ball
- Includes: Stainless Steel Pump, Low Noise Exhaust Motor, 4 Leather/1 PTFE Packings
- Material: Stainless Steel
- Maximum Air Inlet Pressure (bar): 6.9
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Continuous Cycle Rate (CPM): 60
- Maximum Flow Rate (GPM): 4.6
- Maximum Flow Rate (L/min): 17.41
- Maximum Operating Temperature (°C): 66
- Maximum Operating Temperature (°F): 150
- Maximum Working Pressure (bar): 164
- Maximum Working Pressure (kPa): 16400
- Maximum Working Pressure (MPa): 16.4
- Maximum Working Pressure (psi): 2380
- Motor Type: Low Noise NXT
- Mount Type: Wall or Stand Mount
- Portable: Non-Portable
- Pump Ratio: 45:1
DURA-FLO PUMP, 6500/290
GG P45LSS
DURA-FLO PUMP, 6500/290
Graco P45LSS 45:1 - 290cc Dura-Flo Pump with NXT 6500 Air Motor, Severe Duty Stainless Steel Construction
Graco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plant&prime, s production capacity.
Application: Long-lasting durability - Dura-Flo pumps are a time-tested, proven performer- NXT 6500 Air Motor
Modular design for easier maintenance
Rugged body armor won&prime, t rust or dent
Highest technology air motor on the market
- 290cc Dura-Flo Lower
Severe Duty coatings on rods and cylinder Extends production time
- Standard Threaded Coupler -
- Replaceable Seat
Minimizes service costs
- Cast Outlet and Inlet Housing
- Optional DataTrak™ Control
Runaway protection
Pump diagnostics
Material usage
- Model: Dura-Flo
- Ambient/Warm Melt/Hot Melt: Ambient
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
- Compatible Material: CARC, High Solids, Metallics, Solvent borne, Stains, Varnish, Xirallic
- Fluid Inlet Size (in): 2
- Fluid Inlet Size (mm): 50.8000
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4000
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Includes: Motor, Lower, Rod Tie, Collar Coupling, Adaptor, Nut Coupling, Nut Hex, Wrench
- Material: Stainless Steel
- Maximum Working Pressure (bar): 314
- Maximum Working Pressure (kPa): 31400
- Maximum Working Pressure (MPa): 31.4
- Maximum Working Pressure (psi): 4550
- Power Type: Pneumatic
- Pump Ratio: 45:1
Improves structural integrity
- Optional DataTrak™ Control
DURA-FLO PUMP, 3400/145
GG P46DSH
DURA-FLO PUMP, 3400/145
Dura-Flo NXT 2-Ball Piston Pump, 46:1, De-Icing Exhaust Motor, SST, PTFE/Leather PackingsGraco’s Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.
Positive displacement, 2 ball piston design provides uniform and easily controlled delivery High pump pressure and flow performance to handle a broad range of paints and coatings Improved serviceability with fewer parts, faster repairs and lower ownership cost Monitor and protect your pump with DataTrak
47:1 - 430cc Dura-Flo Pump with XL 10000 Air Motor, Severe Duty Carbon Steel Construction
GG P47LCS
DURA-FLO PUMP,20650/430
Graco P47LCS 47:1 - 430cc Dura-Flo Pump with XL 10000 Air Motor, Severe Duty Carbon Steel Construction
Graco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plant's production capacity.
Application: Long-lasting durability - Dura-Flo pumps are a time-tested, proven performer
- XL 1000 Air Motor
- Low Noise
- Modular design for easier maintenance
- Rugged body armor won't rust or dent
- Highest technology air motor on the market
- 430cc Dura-Flo Lower
- Severe Duty coatings on rods and cylinder Extends production time
Standard Threaded Coupler -
Replaceable 1 1/2" -11 1/2 NPT Male Outlet Fitting
- Reduces repair costs
Replaceable Seat
- Minimizes service costs
Cast Outlet and Inlet Housing
- Improves structural integrity
DURA-FLO PUMP, 20650/430
GG P47LSM
DURA-FLO PUMP, 20650/430
Graco P47LSM 47:1 - 430cc Dura-Flo Pump with XL 10000 Air Motor, MaxLife Stainless Steel Construction
Graco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plant&prime, s production capacity.
Application: Long-lasting durability - Dura-Flo pumps are a time-tested, proven performer- XL 1000 Air Motor
Low Noise
Modular design for easier maintenance
Rugged body armor won&prime, t rust or dent
Highest technology air motor on the market
- 430cc Dura-Flo Lower
MaxLife coatings on rods and cylinder maximizes wear life
- Standard Threaded Coupler -
- Replaceable Seat
Minimizes service costs
- Cast Outlet and Inlet Housing
- Optional DataTrak™ Control
Runaway protection
Pump diagnostics
Material usage
- Model: Dura-Flo
- Ambient/Warm Melt/Hot Melt: Ambient
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
- Compatible Material: CARC, High Solids, Metallics, Solvent borne, Stains, Varnish, Xirallic
- Fluid Inlet Size (in): 2
- Fluid Inlet Size (mm): 50.8000
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (in): 1-1/2
- Fluid Outlet Thread Gender: Male
- Fluid Outlet Thread Type: NPT
- Includes: Motor, Lower, Rod Tie, Collar Coupling, Adaptor, Nut Coupling, Nut Hex, Wrench
- Material: Stainless Steel
- Maximum Working Pressure (bar): 324
- Maximum Working Pressure (kPa): 32400
- Maximum Working Pressure (MPa): 32.4
- Maximum Working Pressure (psi): 4700
- Power Type: Pneumatic
- Pump Ratio: 47:1
Improves structural integrity
- Optional DataTrak™ Control
DURA-FLO PUMP, 6500/220
GG P57LSS
DURA-FLO PUMP, 6500/220
57:1 - 220cc Dura-Flo Pump with NXT 6500 Air Motor, Severe Duty Stainless Steel ConstructionGraco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plant's production capacity.
Long-lasting durability - Dura-Flo pumps are a time-tested, proven performer NXT 6500 Air Motor- Modular design for easier maintenance
- Rugged body armor won't rust or dent
- Highest technology air motor on the market
- Severe Duty coatings on rods and cylinder Extends production time
Standard Threaded Coupler -
1"-11 1/2 NPT Female outlet
- Minimizes service costs
- Improves structural integrity
- Runaway protection
- Pump diagnostics
- Material usage
Replaceable Seat
Cast Outlet and Inlet Housing
Optional DataTrak™ Control
Payment options
