Airpower | Torque Control

LTC OHT 3001 180 in lbs.

STR 810574

Product Group	:	LTC Preset Interchangeable Head Click-Type Torque Wrenches, in-lb
Model	:	LTC 300 I OHT
Torque Range (Nm)	:	40.8-204 Nm

+/- 4% repeatability from 20% to 100% of capacity
Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
Tools preset at the factory include a free Certificate of Calibration from our ISO 17025 Accredited Lab
Low profile of the square drive creates access where other tools cannot go
Flattened case is sideloading resistant
Error Proofing By Design flattened case provides superior mechanism support that makes the wrench easier to calibrate and it holds calibration much longer than other wrenches
Excellent tactile and audible pulse when the preset torque is achieved
Cushion grip plus lightweight for excellent ergonomics
Fixed square drive provides exceptional strength and durability
CART tool
Torque is preset and locked in with a special tool
Torque can be set using any unit of measurement
Combination Adjusting and Release Tool (CART) P/N 819117 allows the operator to easily adjust torque on all SLTC -FM, SLTC, LTC, LTCR, and LTCS wrenches
Can be ordered preset from the factory or you can set the torque with your own torque tester

$260.93

STR 869770

Product Group	:	CCM Micrometer Adjustable Click Wrenches, ft-lb
Model	:	CCM 75 MG
Torque Range (in.lb)	:	15-75 lbf ft
Scale (in)	:	0.5 lbf ft

Accuracy of +/-4% of Indicated Value from 20% to 100% of the rated capacity
Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
SR Dovetail connects with all of our interchangeable heads
Every one of our interchangeable heads fits on every one of our wrenches
No need to buy multiple wrenches and heads to cover all fastener sizes within a given torque range
Error Proofing By Guidance: Strong audible and tactile impulse when set torque value is achieved
Knurl Grip handle is rugged and comfortable in your hand for long periods of time
Fast adjustment: These wrenches need the fewest number of rotations to move up and down the scale
Error Proofing By Design: Spring tension on these wrenches can be reduced without the wrench falling out of tolerance
Includes FREE certification from our +/-.25% Indicated Value ISO/IEC 17025 Accredited Calibration Laboratory
Open End head sizes go from 1/4" to 1 1/4" (or 5 mm to 32 mm) with our 1 7/16" (36.5 mm) common centerline
Open End head sizes from 1 5/16" to 3 1/4" (or 34 mm to 60 mm) maintain the 3 7/8" (98.4 mm) common centerline
All wrenches with a capacity over 150 ft. lbs. or 200 Nm are calibrated with interchangeable heads having a common centerline of 3 7/8 inches (98.4 mm)

$324.17

STR 869784

Product Group	:	CCM Micrometer Adjustable Click Wrenches, Nm
Model	:	CCM 6NM MG
Torque Range (Nm)	:	1.2-6 Nm
Scale (Nm)	:	0.1 Nm

Accuracy of +/-4% of Indicated Value from 20% to 100% of the rated capacity
Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
SR Dovetail connects with all of our interchangeable heads
Every one of our interchangeable heads fits on every one of our wrenches
No need to buy multiple wrenches and heads to cover all fastener sizes within a given torque range
Error Proofing By Guidance: Strong audible and tactile impulse when set torque value is achieved
Knurl Grip handle is rugged and comfortable in your hand for long periods of time
Fast adjustment: These wrenches need the fewest number of rotations to move up and down the scale
Error Proofing By Design: Spring tension on these wrenches can be reduced without the wrench falling out of tolerance
Includes FREE certification from our +/-.25% Indicated Value ISO/IEC 17025 Accredited Calibration Laboratory
Open End head sizes go from 1/4" to 1 1/4" (or 5 mm to 32 mm) with our 1 7/16" (36.5 mm) common centerline
Open End head sizes from 1 5/16" to 3 1/4" (or 34 mm to 60 mm) maintain the 3 7/8" (98.4 mm) common centerline
All wrenches with a capacity over 150 ft. lbs. or 200 Nm are calibrated with interchangeable heads having a common centerline of 3 7/8 inches (98.4 mm)

$286.23

STR 869786

Product Group	:	CCM Micrometer Adjustable Click Wrenches, Nm
Model	:	CCM 100NM MG
Torque Range (Nm)	:	20-100 Nm
Scale (Nm)	:	0.5 Nm

Accuracy of +/-4% of Indicated Value from 20% to 100% of the rated capacity
Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
SR Dovetail connects with all of our interchangeable heads
Every one of our interchangeable heads fits on every one of our wrenches
No need to buy multiple wrenches and heads to cover all fastener sizes within a given torque range
Error Proofing By Guidance: Strong audible and tactile impulse when set torque value is achieved
Knurl Grip handle is rugged and comfortable in your hand for long periods of time
Fast adjustment: These wrenches need the fewest number of rotations to move up and down the scale
Error Proofing By Design: Spring tension on these wrenches can be reduced without the wrench falling out of tolerance
Includes FREE certification from our +/-.25% Indicated Value ISO/IEC 17025 Accredited Calibration Laboratory
Open End head sizes go from 1/4" to 1 1/4" (or 5 mm to 32 mm) with our 1 7/16" (36.5 mm) common centerline
Open End head sizes from 1 5/16" to 3 1/4" (or 34 mm to 60 mm) maintain the 3 7/8" (98.4 mm) common centerline
All wrenches with a capacity over 150 ft. lbs. or 200 Nm are calibrated with interchangeable heads having a common centerline of 3 7/8 inches (98.4 mm)