Menu
Search
Search Close
Shopping cart Close

You have no items in your shopping cart.

All Categories
    Menu Close

    Torque Control

    View as Grid List
    Sort by
    Display items per page
    STR 819037.jpg

    1in Flare Nut Wrench

    STR 819037

    STR 819037

    Flare Nut Interchangeable Heads for Torque Wrenches

    Model: FN 1
    Capacity: 1000 lbf in
    Dimensions Insert: 1 in

    A: 2.2 in
    B: 1.6 in
    C: 0.7 in
    D: 1.3 in
    E: 0.9 in

    Product Description

    • One piece, cast, proprietary steel selection
    • All of our heads fit on all of our wrenches
    • Our smallest head fits on our largest wrench
    • Our largest head fits on our smallest wrench
    • Fewer wrenches to buy, calibrate, repair, and manage
    • No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
    • Sturtevant Richmont interchangeable heads have two common centerlines
    • Typically for sizes 32 mm and below the common centerline is 365 mm
    • Sizes larger than 33 mm the common centerline extends to 984 mm
    $168.45
    STR 819038.jpg

    1-1/16 Flare Nut Wrench

    STR 819038

    STR 819038

    Flare Nut Interchangeable Heads for Torque Wrenches

    Model: FN 1 1/16
    Capacity: 1050 lbf in
    Dimensions Insert: 1-1/16 in

    A: 2.5 in
    B: 2.1 in
    C: 0.9 in
    D: 1.3 in
    E: 0.9 in

    Product Description

    • One piece, cast, proprietary steel selection
    • All of our heads fit on all of our wrenches
    • Our smallest head fits on our largest wrench
    • Our largest head fits on our smallest wrench
    • Fewer wrenches to buy, calibrate, repair, and manage
    • No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
    • Sturtevant Richmont interchangeable heads have two common centerlines
    • Typically for sizes 32 mm and below the common centerline is 365 mm
    • Sizes larger than 33 mm the common centerline extends to 984 mm
    $168.45
    STR 819504.jpg

    LTCE 6-15

    STR 819504

    STR 819504

    16 Degree Interchangeable Heads for Torque Wrenches

    Model: LTCE 6-15


    Product Description

    • Preset torque wrench must always be preset after the extension and the fastener engagement interchangeable head has been attached
    • 15-degree bend in the extension; fastener engagement will be 15 degrees off the tool centerline
    • Sturtevant Richmont interchangeable heads have two common centerlines
    • Typically for sizes 32 mm and below the common centerline is 365 mm
    • Sizes larger than 33 mm the common centerline extends to 984 mm
    $462.24
    STR 850222.jpg

    Torque Wrench, M 25 I, 25 Inch Lbs

    STR 850222

    STR 850222

    Beam & Dial Torque Wrenches: Flat and Tapered Beam Torque Wrenches, in-lb

    Product Group: Flat and Tapered Beam Torque Wrenches, in-lb
    Model: M 25 I
    Torque Scale: 25 lbf in
    Square: 1 lbf in
    Weight: 0.4 lb

    Product Description

    • Pivoted handle concentrates load at a precise point on the lever to assure torque accuracy
    • Memory feature consists of pointers that follow a track on the scale and remain in place to indicate peak torque achieved
    • Peak torque indicated on the scale is accurate even in destructive applications
    • Meets or exceeds requirements for ASME B107, 300-2010 and ISO 6789
    • Includes certificate of calibration from our +/- 25% indicated value accuracy/ISO/IEC 17025 accredited calibration laboratory
    • 850222, 850242, 850191: These products have a pivoted ball handle.
    $477.45
    STR 850241.jpg

    M 50 1/2

    STR 850241

    STR 850241

    Beam & Dial Torque Wrenches: Flat and Tapered Beam Torque Wrenches, ft-lb

    Product Group: Flat and Tapered Beam Torque Wrenches, ft-lb
    Model: M 50 1/2
    Torque Scale: 50 lbf ft
    Square: 2 lbf ft
    Weight: 2.75 lb

    Product Description

    • Incredibly durable design
    • Exceptional accuracy retention permits extended calibration intervals and extremely low ownership cost
    • Flat and Tapered Beam torque wrenches have a very low cost of ownership; they are virtually maintenance and repair-free
    • Pivoted handle concentrates load at a precise point on the lever to assure torque accuracy
    • Memory feature consists of pointers that follow a track on the scale and remain in place to indicate peak torque achieved
    • Peak torque indicated on the scale is accurate even in destructive applications
    • Bi-directional accuracy of +/- 2% of Indicated Value from 20% to 100% of capacity meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
    • Includes FREE certificate of calibration from our +/- .25% Indicated Value accuracy/ISO/IEC 17025 Accredited Calibration Laboratory
    $773.96
    STR 850246.jpg

    Flat Beam Torque Wrench, 3/8in Sq. Dr.

    STR 850246

    STR 850246

    Beam & Dial Torque Wrenches: Flat and Tapered Beam Torque Wrenches, in-lb

    Product Group: Flat and Tapered Beam Torque Wrenches, in-lb
    Model: M 600 I 3/8
    Torque Scale: 600 lbf in
    Square: 25 lbf in
    Weight: 2.75 lb

    Product Description

    • Pivoted handle concentrates load at a precise point on the lever to assure torque accuracy
    • Memory feature consists of pointers that follow a track on the scale and remain in place to indicate peak torque achieved
    • Peak torque indicated on the scale is accurate even in destructive applications
    • Meets or exceeds requirements for ASME B107, 300-2010 and ISO 6789
    • Includes certificate of calibration from our +/- 25% indicated value accuracy/ISO/IEC 17025 accredited calibration laboratory
    • 850222, 850242, 850191: These products have a pivoted ball handle.
    $767.86
    STR 850247.jpg

    Flat Beam M Series Torque Wrench 1/2 In Square Drive

    STR 850247

    STR 850247

    Beam & Dial Torque Wrenches: Flat and Tapered Beam Torque Wrenches, in-lb

    Product Group: Flat and Tapered Beam Torque Wrenches, in-lb
    Model: M 600 I 1/2
    Torque Scale: 600 lbf in
    Square: 25 lbf in
    Weight: 2.75 lb

    Product Description

    • Pivoted handle concentrates load at a precise point on the lever to assure torque accuracy
    • Memory feature consists of pointers that follow a track on the scale and remain in place to indicate peak torque achieved
    • Peak torque indicated on the scale is accurate even in destructive applications
    • Meets or exceeds requirements for ASME B107, 300-2010 and ISO 6789
    • Includes certificate of calibration from our +/- 25% indicated value accuracy/ISO/IEC 17025 accredited calibration laboratory
    • 850222, 850242, 850191: These products have a pivoted ball handle.
    $773.96
    STR 850254.jpg

    M 80 IO

    STR 850254

    STR 850254

    Beam & Dial Torque Wrenches: Flat and Tapered Beam Torque Wrenches, in-oz

    Product Group: Flat and Tapered Beam Torque Wrenches, in-oz
    Model: M 80 IO
    Torque Scale: 5 ozf.in
    Square: 1/4 in
    Weight: 0.25 lb

    Product Description

    • Pivoted handle concentrates load at a precise point on the lever to assure torque accuracy
    • Memory feature consists of pointers that follow a track on the scale and remain in place to indicate peak torque achieved
    • Peak torque indicated on the scale is accurate even in destructive applications
    • Bi-directional accuracy of +/-2% of indicated value from 20% to 100% of capacity
    • Meets or exceeds requirements for ASME B107 .300-2010 and ISO 6789
    • Includes certificate of calibration from our +/- .25% indicated value accuracy/ISO/IEC 17025 accredited calibration laboratory
    $460.72
    STR 850369.jpg

    Torque Multiplier TM-1000, 1000 ft Lbs

    STR 850369

    STR 850369

    Torque Multipliers: Torque Multipliers, ft-lb

    Product Group: Torque Multipliers, ft-lb
    Model: TM 1000
    Capacity: 1000 lbf ft
    Weight: 12 lb
    OAL: 26 in

    Product Description

    • Extremely portable so it is well-suited to job site use
    • Apacities of up to 4000 ft. lbs. or equivalent
    • Multipliers can be used with either English or S. I. flat beam torque wrenches
    • Reaction bar or reaction foot keeps gear box from turning
    • Gear box has natural frictional loss
    • For normal requirements, a loss factor of 10% to 20% should be used.
    $1,275.72
    STR 869159.jpg

    3SD 200I MG, Torque Wrench

    STR 869159

    STR 869159

    Micrometer Adjustable Torque Wrenches: SD Series Micrometer Adjustable Click Wrenches, in-lb

    Product Group: SD Series Micrometer Adjustable Click Wrenches, in-lb
    Model: 3SD 200I MG
    Torque Range (in.lb): 40-200 lbf in
    Scale (in): 2 lbf in
    Overal Length: 9.4 in
    Weight (lb): 1 lb

    Product Description

    • Torque value is adjusted by rotating the grip
    • Our tools change from the top of the scale to the bottom in the fewest number of turns
    • Grip lock makes locking in the torque value fast, easy, and secure
    • Ball-bearing rock-over assembly assures smooth operation, enhances repeatability, and increases wrench service life
    • Accuracy of +/- 4% of Indicated Value from 20% to 100% of rated capacity
    • Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
    • Design provides a strong audible and tactile pulse when the set torque is achieved
    • Flattened case provides the mechanism with superior support resulting in a wrench that is easier to calibrate and one that holds calibration longer
    • Ratchet is built for durability
    • Ratchet replacement is fast and easy when needed
    • All tools up to 250 ft-lb, or 300 Nm, capacity come with a rugged, custom-molded plastic case
    • Includes FREE tabulated calibration certificate.
    $313.22
    STR 869747.jpg

    3 SDR 1200I Adjustable Torque Wrench

    STR 869747

    STR 869747

    Micrometer Adjustable Torque Wrenches: SDR Series Micrometer Adjustable Click Wrench, in-lb

    Product Group: SDR Series Micrometer Adjustable Click Wrench, in-lb
    Model: 3SDR 1200I MG
    Torque Range (in.lb): 240-1200 lbf in
    Scale (in): 10 lbf in
    Overal Length: 18.8 in
    Weight (lb): 1.5 lb

    Product Description

    • Adjust torque value by rotating the grip
    • Grip lock makes locking in torque value fast, easy, and secure
    • Tool changees from one end of the scale to the other with the fewest number of turns
    • Ball-bearing rock-over assembly assures smooth operation enhances repeatability and increases wrench service life
    • Accuracy of +/- 4% of Indicated Value from 20% to 100% of rated capacity
    • Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
    • Error Proofing By Guidance design provides a strong audible and tactile impulse when the set torque is achieved
    • Error Proofing By Design flattened case provides the mechanism with superior support resulting in a wrench that is easier to calibrate and one that holds calibration longer
    • Flattened case prevents side loading during torque application or testing/calibration
    • Knurled grip offers an ergonomic grip that remains comfortable over long periods of use
    • Ratchet is built for durability
    • Ratchet replacement is fast and easy when needed
    • All tools up to 250 ft-lb capacity come with a rugged, custom-molded plastic case
    • Includes FREE tabulated calibration certificate from our ISO 17025 certified calibration laboratory
    $404.46
    STR 869748.jpg

    3SDR 600ITorque Wrench, Knurl Grip

    STR 869748

    STR 869748

    Micrometer Adjustable Torque Wrenches: SDR Series Micrometer Adjustable Click Wrench, in-lb

    Product Group: SDR Series Micrometer Adjustable Click Wrench, in-lb
    Model: 3SDR 600I MG
    Torque Range (in.lb): 120-600 lbf in
    Scale (in): 5 lbf in
    Overal Length: 15.2 in
    Weight (lb): 1.5 lb

    Product Description

    • Adjust torque value by rotating the grip
    • Grip lock makes locking in torque value fast, easy, and secure
    • Tool changees from one end of the scale to the other with the fewest number of turns
    • Ball-bearing rock-over assembly assures smooth operation enhances repeatability and increases wrench service life
    • Accuracy of +/- 4% of Indicated Value from 20% to 100% of rated capacity
    • Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
    • Error Proofing By Guidance design provides a strong audible and tactile impulse when the set torque is achieved
    • Error Proofing By Design flattened case provides the mechanism with superior support resulting in a wrench that is easier to calibrate and one that holds calibration longer
    • Flattened case prevents side loading during torque application or testing/calibration
    • Knurled grip offers an ergonomic grip that remains comfortable over long periods of use
    • Ratchet is built for durability
    • Ratchet replacement is fast and easy when needed
    • All tools up to 250 ft-lb capacity come with a rugged, custom-molded plastic case
    • Includes FREE tabulated calibration certificate from our ISO 17025 certified calibration laboratory
    $375.57
    STR 869749.jpg

    2SDR 50I MG

    STR 869749

    STR 869749

    Micrometer Adjustable Torque Wrenches: SDR Series Micrometer Adjustable Click Wrench, in-lb

    Product Group: SDR Series Micrometer Adjustable Click Wrench, in-lb
    Model: 2SDR 50I MG
    Torque Range (in.lb): 10-50 lbf in
    Scale (in): 1 lbf in
    Overal Length: 11.2 in
    Weight (lb): 1.0 lb

    Product Description

    • Adjust torque value by rotating the grip
    • Grip lock makes locking in torque value fast, easy, and secure
    • Tool changees from one end of the scale to the other with the fewest number of turns
    • Ball-bearing rock-over assembly assures smooth operation enhances repeatability and increases wrench service life
    • Accuracy of +/- 4% of Indicated Value from 20% to 100% of rated capacity
    • Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
    • Error Proofing By Guidance design provides a strong audible and tactile impulse when the set torque is achieved
    • Error Proofing By Design flattened case provides the mechanism with superior support resulting in a wrench that is easier to calibrate and one that holds calibration longer
    • Flattened case prevents side loading during torque application or testing/calibration
    • Knurled grip offers an ergonomic grip that remains comfortable over long periods of use
    • Ratchet is built for durability
    • Ratchet replacement is fast and easy when needed
    • All tools up to 250 ft-lb capacity come with a rugged, custom-molded plastic case
    • Includes FREE tabulated calibration certificate from our ISO 17025 certified calibration laboratory
    $343.65
    STR 869750.jpg

    2SDR 150I MG

    STR 869750

    STR 869750

    Micrometer Adjustable Torque Wrenches: SDR Series Micrometer Adjustable Click Wrench, in-lb

    Product Group: SDR Series Micrometer Adjustable Click Wrench, in-lb
    Model: 2SDR 150I MG
    Torque Range (in.lb): 30-150 lbf in
    Scale (in): 2 lbf in
    Overal Length: 11.2 in
    Weight (lb): 1.0 lb

    Product Description

    • Adjust torque value by rotating the grip
    • Grip lock makes locking in torque value fast, easy, and secure
    • Tool changees from one end of the scale to the other with the fewest number of turns
    • Ball-bearing rock-over assembly assures smooth operation enhances repeatability and increases wrench service life
    • Accuracy of +/- 4% of Indicated Value from 20% to 100% of rated capacity
    • Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
    • Error Proofing By Guidance design provides a strong audible and tactile impulse when the set torque is achieved
    • Error Proofing By Design flattened case provides the mechanism with superior support resulting in a wrench that is easier to calibrate and one that holds calibration longer
    • Flattened case prevents side loading during torque application or testing/calibration
    • Knurled grip offers an ergonomic grip that remains comfortable over long periods of use
    • Ratchet is built for durability
    • Ratchet replacement is fast and easy when needed
    • All tools up to 250 ft-lb capacity come with a rugged, custom-molded plastic case
    • Includes FREE tabulated calibration certificate from our ISO 17025 certified calibration laboratory
    $354.28
    Picture of 3SDR 750i MG

    3SDR 750i MG

    STR 869752

    STR 869752

    3SDR 750i MG
    $375.57
    STR 869757.jpg

    4 SDR 150 Torque Wrench, Knurl-Grip

    STR 869757

    STR 869757

    Micrometer Adjustable Torque Wrenches: SDR Series Micrometer Adjustable Click Wrench, ft-lb

    Product Group: SDR Series Micrometer Adjustable Click Wrench, ft-lb
    Model: 4SDR 150 MG
    Torque Range (ft.lb): 30-150 lbf ft
    Scale (lb): 1 lbf ft
    Square Drive: 1/2 in
    Weight (lb): 2.0 lb

    Product Description

    • Adjust torque value by rotating the grip
    • Grip lock makes locking in torque value fast, easy, and secure
    • Tool changees from one end of the scale to the other with the fewest number of turns
    • Ball-bearing rock-over assembly assures smooth operation enhances repeatability and increases wrench service life
    • Accuracy of +/- 4% of Indicated Value from 20% to 100% of rated capacity
    • Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
    • Error Proofing By Guidance design provides a strong audible and tactile impulse when the set torque is achieved
    • Error Proofing By Design flattened case provides the mechanism with superior support resulting in a wrench that is easier to calibrate and one that holds calibration longer
    • Flattened case prevents side loading during torque application or testing/calibration
    • Knurled grip offers an ergonomic grip that remains comfortable over long periods of use
    • Ratchet is built for durability
    • Ratchet replacement is fast and easy when needed
    • All tools up to 250 ft-lb capacity come with a rugged, custom-molded plastic case
    • Includes FREE tabulated calibration certificate from our ISO 17025 certified calibration laboratory
    $444.00
    STR 869758.jpg

    4SDR 250 Torque Wrench, Knurl-Grip

    STR 869758

    STR 869758

    Micrometer Adjustable Torque Wrenches: SDR Series Micrometer Adjustable Click Wrench, ft-lb

    Product Group: SDR Series Micrometer Adjustable Click Wrench, ft-lb
    Model: 4SDR 250 MG
    Torque Range (ft.lb): 50-250 lbf ft
    Scale (lb): 2 lbf ft
    Square Drive: 1/2 in
    Weight (lb): 3.5 lb

    Product Description

    • Adjust torque value by rotating the grip
    • Grip lock makes locking in torque value fast, easy, and secure
    • Tool changees from one end of the scale to the other with the fewest number of turns
    • Ball-bearing rock-over assembly assures smooth operation enhances repeatability and increases wrench service life
    • Accuracy of +/- 4% of Indicated Value from 20% to 100% of rated capacity
    • Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
    • Error Proofing By Guidance design provides a strong audible and tactile impulse when the set torque is achieved
    • Error Proofing By Design flattened case provides the mechanism with superior support resulting in a wrench that is easier to calibrate and one that holds calibration longer
    • Flattened case prevents side loading during torque application or testing/calibration
    • Knurled grip offers an ergonomic grip that remains comfortable over long periods of use
    • Ratchet is built for durability
    • Ratchet replacement is fast and easy when needed
    • All tools up to 250 ft-lb capacity come with a rugged, custom-molded plastic case
    • Includes FREE tabulated calibration certificate from our ISO 17025 certified calibration laboratory
    $570.21
    STR 869761.jpg

    3 SDR 200I Torque Wrench, Knurl-Grip

    STR 869761

    STR 869761

    Micrometer Adjustable Torque Wrenches: SDR Series Micrometer Adjustable Click Wrench, in-lb

    Product Group: SDR Series Micrometer Adjustable Click Wrench, in-lb
    Model: 3SDR 200I MG
    Torque Range (in.lb): 40-200 lbf in
    Scale (in): 2 lbf in
    Overal Length: 10.7 in
    Weight (lb): 1.1 lb

    Product Description

    • Adjust torque value by rotating the grip
    • Grip lock makes locking in torque value fast, easy, and secure
    • Tool changees from one end of the scale to the other with the fewest number of turns
    • Ball-bearing rock-over assembly assures smooth operation enhances repeatability and increases wrench service life
    • Accuracy of +/- 4% of Indicated Value from 20% to 100% of rated capacity
    • Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
    • Error Proofing By Guidance design provides a strong audible and tactile impulse when the set torque is achieved
    • Error Proofing By Design flattened case provides the mechanism with superior support resulting in a wrench that is easier to calibrate and one that holds calibration longer
    • Flattened case prevents side loading during torque application or testing/calibration
    • Knurled grip offers an ergonomic grip that remains comfortable over long periods of use
    • Ratchet is built for durability
    • Ratchet replacement is fast and easy when needed
    • All tools up to 250 ft-lb capacity come with a rugged, custom-molded plastic case
    • Includes FREE tabulated calibration certificate from our ISO 17025 certified calibration laboratory
    $361.88
    STR 869762.jpg

    CCM 1800I Torque Wrench, Knurl-Grip

    STR 869762

    STR 869762

    Micrometer Adjustable Torque Wrenches: CCM Micrometer Adjustable Click Wrenches, in-lb

    Product Group: CCM Micrometer Adjustable Click Wrenches, in-lb
    Model: CCM 1800I MG
    Torque Range (in.lb): 360-1800 lbf in
    Scale (in): 10 lbf in
    Overal Length: 17.1 in

    Product Description

    • Accuracy of +/-4% of Indicated Value from 20% to 100% of the rated capacity
    • Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
    • SR Dovetail connects with all of our interchangeable heads
    • Every one of our interchangeable heads fits on every one of our wrenches
    • No need to buy multiple wrenches and heads to cover all fastener sizes within a given torque range
    • Error Proofing By Guidance: Strong audible and tactile impulse when set torque value is achieved
    • Knurl Grip handle is rugged and comfortable in your hand for long periods of time
    • Fast adjustment: These wrenches need the fewest number of rotations to move up and down the scale
    • Error Proofing By Design: Spring tension on these wrenches can be reduced without the wrench falling out of tolerance
    • Includes FREE certification from our +/-.25% Indicated Value ISO/IEC 17025 Accredited Calibration Laboratory
    • Open End head sizes go from 1/4" to 1 1/4" (or 5 mm to 32 mm) with our 1 7/16" (36.5 mm) common centerline
    • Open End head sizes from 1 5/16" to 3 1/4" (or 34 mm to 60 mm) maintain the 3 7/8" (98.4 mm) common centerline
    • All wrenches with a capacity over 150 ft. lbs. or 200 Nm are calibrated with interchangeable heads having a common centerline of 3 7/8 inches (98.4 mm)
    $383.17
    STR 869774.jpg

    2SDR 6Nm MG

    STR 869774

    STR 869774

    Micrometer Adjustable Torque Wrenches: SDR Series Micrometer Adjustable Click Wrench, Nm

    Product Group: SDR Series Micrometer Adjustable Click Wrench, Nm
    Model: 2SDR 6Nm MG
    Torque Range (Nm): 1.2-6 Nm
    Scale (Nm): 0.1 Nm
    Overal Length: 11.4 in
    Weight (lb): 1.1 lb

    Product Description

    • Adjust torque value by rotating the grip
    • Grip lock makes locking in torque value fast, easy, and secure
    • Tool changees from one end of the scale to the other with the fewest number of turns
    • Ball-bearing rock-over assembly assures smooth operation enhances repeatability and increases wrench service life
    • Accuracy of +/- 4% of Indicated Value from 20% to 100% of rated capacity
    • Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
    • Error Proofing By Guidance design provides a strong audible and tactile impulse when the set torque is achieved
    • Error Proofing By Design flattened case provides the mechanism with superior support resulting in a wrench that is easier to calibrate and one that holds calibration longer
    • Flattened case prevents side loading during torque application or testing/calibration
    • Knurled grip offers an ergonomic grip that remains comfortable over long periods of use
    • Ratchet is built for durability
    • Ratchet replacement is fast and easy when needed
    • All tools up to 250 ft-lb capacity come with a rugged, custom-molded plastic case
    • Includes FREE tabulated calibration certificate from our ISO 17025 certified calibration laboratory
    $343.65
    STR 869775.jpg

    2SDR 20Nm MG

    STR 869775

    STR 869775

    Micrometer Adjustable Torque Wrenches: SDR Series Micrometer Adjustable Click Wrench, Nm

    Product Group: SDR Series Micrometer Adjustable Click Wrench, Nm
    Model: 2SDR 20Nm MG
    Torque Range (Nm): 4-20 Nm
    Scale (Nm): 0.2 Nm
    Overal Length: 11.4 in
    Weight (lb): 1.1 lb

    Product Description

    • Adjust torque value by rotating the grip
    • Grip lock makes locking in torque value fast, easy, and secure
    • Tool changees from one end of the scale to the other with the fewest number of turns
    • Ball-bearing rock-over assembly assures smooth operation enhances repeatability and increases wrench service life
    • Accuracy of +/- 4% of Indicated Value from 20% to 100% of rated capacity
    • Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
    • Error Proofing By Guidance design provides a strong audible and tactile impulse when the set torque is achieved
    • Error Proofing By Design flattened case provides the mechanism with superior support resulting in a wrench that is easier to calibrate and one that holds calibration longer
    • Flattened case prevents side loading during torque application or testing/calibration
    • Knurled grip offers an ergonomic grip that remains comfortable over long periods of use
    • Ratchet is built for durability
    • Ratchet replacement is fast and easy when needed
    • All tools up to 250 ft-lb capacity come with a rugged, custom-molded plastic case
    • Includes FREE tabulated calibration certificate from our ISO 17025 certified calibration laboratory
    $354.28
    STR 869778.jpg

    4 SDR 200 NM -MG

    STR 869778

    STR 869778

    Micrometer Adjustable Torque Wrenches: SDR Series Micrometer Adjustable Click Wrench, Nm

    Product Group: SDR Series Micrometer Adjustable Click Wrench, Nm
    Model: 4SDR 200Nm MG
    Torque Range (Nm): 40-200 Nm
    Scale (Nm): 1 Nm
    Overal Length: 19.1 in
    Weight (lb): 1.9 lb

    Product Description

    • Adjust torque value by rotating the grip
    • Grip lock makes locking in torque value fast, easy, and secure
    • Tool changees from one end of the scale to the other with the fewest number of turns
    • Ball-bearing rock-over assembly assures smooth operation enhances repeatability and increases wrench service life
    • Accuracy of +/- 4% of Indicated Value from 20% to 100% of rated capacity
    • Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
    • Error Proofing By Guidance design provides a strong audible and tactile impulse when the set torque is achieved
    • Error Proofing By Design flattened case provides the mechanism with superior support resulting in a wrench that is easier to calibrate and one that holds calibration longer
    • Flattened case prevents side loading during torque application or testing/calibration
    • Knurled grip offers an ergonomic grip that remains comfortable over long periods of use
    • Ratchet is built for durability
    • Ratchet replacement is fast and easy when needed
    • All tools up to 250 ft-lb capacity come with a rugged, custom-molded plastic case
    • Includes FREE tabulated calibration certificate from our ISO 17025 certified calibration laboratory
    $444.00
    STR 869781.jpg

    2SDR200IMG, 40-200 IN.LB Torque Wrench

    STR 869781

    STR 869781

    Micrometer Adjustable Torque Wrenches: SDR Series Micrometer Adjustable Click Wrench, in-lb

    Product Group: SDR Series Micrometer Adjustable Click Wrench, in-lb
    Model: 2SDR 200I MG
    Torque Range (in.lb): 40-200 lbf in
    Scale (in): 3 lbf in
    Weight (lb): 1.0 lb

    Product Description

    • Adjust torque value by rotating the grip
    • Grip lock makes locking in torque value fast, easy, and secure
    • Tool changees from one end of the scale to the other with the fewest number of turns
    • Ball-bearing rock-over assembly assures smooth operation enhances repeatability and increases wrench service life
    • Accuracy of +/- 4% of Indicated Value from 20% to 100% of rated capacity
    • Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
    • Error Proofing By Guidance design provides a strong audible and tactile impulse when the set torque is achieved
    • Error Proofing By Design flattened case provides the mechanism with superior support resulting in a wrench that is easier to calibrate and one that holds calibration longer
    • Flattened case prevents side loading during torque application or testing/calibration
    • Knurled grip offers an ergonomic grip that remains comfortable over long periods of use
    • Ratchet is built for durability
    • Ratchet replacement is fast and easy when needed
    • All tools up to 250 ft-lb capacity come with a rugged, custom-molded plastic case
    • Includes FREE tabulated calibration certificate from our ISO 17025 certified calibration laboratory
    $361.88
    STR 869782.jpg

    3 SDR 50 NM -MG

    STR 869782

    STR 869782

    Micrometer Adjustable Torque Wrenches: SDR Series Micrometer Adjustable Click Wrench, Nm

    Product Group: SDR Series Micrometer Adjustable Click Wrench, Nm
    Model: 3SDR 50Nm MG
    Torque Range (Nm): 10-50 Nm
    Scale (Nm): 0.5 Nm
    Overal Length: 15.5 in
    Weight (lb): 1.5 lb

    Product Description

    • Adjust torque value by rotating the grip
    • Grip lock makes locking in torque value fast, easy, and secure
    • Tool changees from one end of the scale to the other with the fewest number of turns
    • Ball-bearing rock-over assembly assures smooth operation enhances repeatability and increases wrench service life
    • Accuracy of +/- 4% of Indicated Value from 20% to 100% of rated capacity
    • Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
    • Error Proofing By Guidance design provides a strong audible and tactile impulse when the set torque is achieved
    • Error Proofing By Design flattened case provides the mechanism with superior support resulting in a wrench that is easier to calibrate and one that holds calibration longer
    • Flattened case prevents side loading during torque application or testing/calibration
    • Knurled grip offers an ergonomic grip that remains comfortable over long periods of use
    • Ratchet is built for durability
    • Ratchet replacement is fast and easy when needed
    • All tools up to 250 ft-lb capacity come with a rugged, custom-molded plastic case
    • Includes FREE tabulated calibration certificate from our ISO 17025 certified calibration laboratory
    $375.57
    STR 869787.jpg

    CCM 200Nm Torque Wrench, Knurl-Grip, Metric

    STR 869787

    STR 869787

    Micrometer Adjustable Torque Wrenches: CCM Micrometer Adjustable Click Wrenches, Nm

    Product Group: CCM Micrometer Adjustable Click Wrenches, Nm
    Model: CCM 200NM MG
    Torque Range (Nm): 40-200 Nm
    Scale (Nm): 1 Nm

    Product Description

    • Accuracy of +/-4% of Indicated Value from 20% to 100% of the rated capacity
    • Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
    • SR Dovetail connects with all of our interchangeable heads
    • Every one of our interchangeable heads fits on every one of our wrenches
    • No need to buy multiple wrenches and heads to cover all fastener sizes within a given torque range
    • Error Proofing By Guidance: Strong audible and tactile impulse when set torque value is achieved
    • Knurl Grip handle is rugged and comfortable in your hand for long periods of time
    • Fast adjustment: These wrenches need the fewest number of rotations to move up and down the scale
    • Error Proofing By Design: Spring tension on these wrenches can be reduced without the wrench falling out of tolerance
    • Includes FREE certification from our +/-.25% Indicated Value ISO/IEC 17025 Accredited Calibration Laboratory
    • Open End head sizes go from 1/4" to 1 1/4" (or 5 mm to 32 mm) with our 1 7/16" (36.5 mm) common centerline
    • Open End head sizes from 1 5/16" to 3 1/4" (or 34 mm to 60 mm) maintain the 3 7/8" (98.4 mm) common centerline
    • All wrenches with a capacity over 150 ft. lbs. or 200 Nm are calibrated with interchangeable heads having a common centerline of 3 7/8 inches (98.4 mm)
    $383.17
    Refine
    ×
    Manufacturer
    Manufacturers
    View all
    Information
    My account
    Customer service

    Payment options

    Copyright © 2025 AirPower. All rights reserved.