Spray Guns - Manual

View as Grid List
Sort by
Display items per page
Picture of WB 3000R RP Gun, 1.1ST, LP90

WB 3000R RP Gun, 1.1ST, LP90

SATA 220467

SATA 220467

WB 3000R RP Gun, 1.1ST, LP90
Call for pricing
Picture of Gun Grease

Gun Grease

SATA 48173

SATA 48173

Gun Grease
Call for pricing
2100 Gun Assembly, 63Bss-L/Air Nozz

2100 Gun Assembly, 63Bss-L/Air Nozz

BB 2101-2800-0

BB 2101-2800-0

2100 Gun Assembly, 63Bss-L/Air Nozz
$401.00
2100 Gw Gun 68Ss X 68Pb

2100 Gw Gun 68Ss X 68Pb

BB 2101-5111-5GW

BB 2101-5111-5GW

2100 Gw Gun 68Ss X 68Pb
$1,790.00
Trophy Gun Pressure/Siphon, 1.0 X 39Hvlp

Trophy Gun Pressure/Siphon, 1.0 X 39Hvlp

BB 2465-10HV-39S0

BB 2465-10HV-39S0

Trophy Gun Pressure/Siphon, 1.0 X 39Hvlp
$860.00
Trophy Gun Pressure/Siphon, 1.8Mmx23

Trophy Gun Pressure/Siphon, 1.8Mmx23

BB 2465-18LV-23S0

BB 2465-18LV-23S0

Trophy Gun Pressure/Siphon, 1.8Mmx23
$846.00
Jga Spray Gun, 80Ex (1.8)

Jga Spray Gun, 80Ex (1.8)

DD JGA-510-80EX

DD JGA-510-80EX

JGA-510 replacement.
  • Binks JGA-510 part.
  • JGA Series
$658.00
Mbc Spray Gun, 30Ex (1.8)

Mbc Spray Gun, 30Ex (1.8)

DD MBC-510-30EX

DD MBC-510-30EX

Mbc Spray Gun, 30Ex (1.8)
$936.00
Stellair Gun, Comp (.055)

Stellair Gun, Comp (.055)

GG 2004155

GG 2004155

Stellair Gun, Comp (.055))

Stellair Air Spray Gun, Compliant, 0.055 in (1.4 mm), General Industry, PEEK Tip
Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Compliant air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Swivel and hose move with you at any angle, preventing tripping and injury.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$630.00
STELLAIR GUN, CONV (.070), ADHESIVES

STELLAIR GUN, CONV (.070), ADHESIVES

GG 2004174

GG 2004174

STELLAIR GUN, CONV (.070), ADHESIVES

Stellair Air Spray Gun, Conventional, 0.070 in (1.8 mm), Adhesive, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Conventional is the traditional air spray method, producing Class A, automotive finish quality.
Adhesive air cap atomizes waterborne and solvent borne adhesives and sealants.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Swivel and hose move with you at any angle, preventing tripping and injury.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$473.00
AIRPRO GUN, ASSY, EFX, LVMP, .020 Obsolete

AIRPRO GUN, ASSY, EFX, LVMP, .020 Obsolete

GG 24B869

GG 24B869

AIRPRO GUN, ASSY, EFX, LVMP, .020

Graco 24B869 AirPro EFX Auto Air Spray Gun with Manifold, LVMP, 0.020 inch (0.5 mm) Nozzle, SST Tip, Ultra Precision Fluid Adjust Knob

The AirPro EFX air spray automatic guns are among the lightest and most compact guns in their class. With no internal air shutoff mechanism, the AirPro EFX delivers increased reliability and precision fluid flow. The modest size and weight of this gun make it an excellent choice for fixed, reciprocating and robotic applications.

  • Aircaps and nozzles deliver superior, precision spray performance
  • Precision fluid adjustment with a micrometer-telescoping knob
  • High wear components designed for abrasive materials


  • Model: AirPro
  • Series: EFX
  • Applicator Type: Automatic
  • Bleed Type: Bleeder
  • Body Material: Plastic
  • Compatible Material: Ceramics, Enamel, Fast-Set, High Solids, Solvent borne, Waterborne
  • Component Type: Single Component
  • Feed Type: Pressure Feed
  • Fluid Adjustment Knob: Ultra Precision
  • Fluid Orifice Size (cm): 0.051
  • Fluid Orifice Size (in): 0.020
  • Fluid Orifice Size (mm): 0.5
  • Gun Activation: Automatic
  • Gun Type: LVMP Gun
  • Gun Weight (kg): 0.59
  • Gun Weight (lb): 1.3
  • Includes: Air Cap with Pin, Fluid Adjustment Knob, Manifold, Needle/Nozzle Kit
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Flow Rate @ PSI (oz/min): 1.7
  • Maximum Fluid Pressure (bar): 7
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 49
  • Maximum Fluid Temperature (°F): 120
  • Maximum Fluid Pressure (bar): 7
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 49
  • Maximum Fluid Temperature (°F): 120
  • Minimum Flow Rate @ PSI (oz/min): 0.2
  • Needle Tip Material: Stainless Steel
  • Overall Height (cm): 2.6
  • Overall Height (in): 1
  • Overall Height (mm): 25
  • Overall Length (cm): 12
  • Overall Length (in): 4.9
  • Overall Length (mm): 124
  • Overall Width (cm): 3.8
  • Overall Width (in): 1
  • Overall Width (mm): 25
  • Purge Method: Air
$2,700.00
AIRPRO GUN, CONV, .055 Obsolete

AIRPRO GUN, CONV, .055 Obsolete

GG 289002

GG 289002

AIRPRO GUN, CONV, .055

Graco 289002 AirPro Air Spray Gravity Feed Gun, Conventional, 0.055 inch (1.4 mm) Nozzle, without Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

  • Even material distribution through the spray pattern for optimum coverage
  • Improved transfer efficiency through reduced air consumption
  • Enhanced atomization through material-specific aircaps
  • Ultra-light trigger pull reduces operator muscle stress
  • Ergonomic gun handle provides a comfortable grip
  • Rounded control knobs for operator comfort
  • Optimize spray performance with our cutting edge aircap and nozzle design
  • Choose from a wide range of gun models to meet the needs of your specific application


  • Model: AirPro
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Application: Specialty
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Gravity Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.14
  • Fluid Orifice Size (in): 0.055
  • Fluid Orifice Size (mm): 1.4
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Conventional Gun
  • Gun Weight (g): 410
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
Call for pricing
AIRPRO GUN, ASSY, CONV, GRAVITY W/CUP Obsolete

AIRPRO GUN, ASSY, CONV, GRAVITY W/CUP Obsolete

GG 289011

GG 289011

AIRPRO GUN, ASSY, CONV, GRAVITY W/CUP

Graco 289011 AirPro Air Spray Gravity Feed Gun, Conventional, 0.055 inch (1.4 mm) Nozzle, Plastic Gravity Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

  • Even material distribution through the spray pattern for optimum coverage
  • Improved transfer efficiency through reduced air consumption
  • Enhanced atomization through material-specific aircaps
  • Ultra-light trigger pull reduces operator muscle stress
  • Ergonomic gun handle provides a comfortable grip
  • Rounded control knobs for operator comfort
  • Optimize spray performance with our cutting edge aircap and nozzle design
  • Choose from a wide range of gun models to meet the needs of your specific application


  • Model: AirPro
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Application: Specialty
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Gravity Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.14
  • Fluid Orifice Size (in): 0.055
  • Fluid Orifice Size (mm): 1.4
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Conventional Gun
  • Gun Weight (g): 590
  • Gun Weight (kg): 0.59
  • Gun Weight (lb): 1.3
  • Gun Weight (oz): 20.8
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
$545.00
FINEX GUN, GRACO, 2, CONV., 1.3

FINEX GUN, GRACO, 2, CONV., 1.3

GG 289243

GG 289243

FINEX GUN, GRACO, 2, CONV., 1.3

Graco 289243 Finex Air Spray Gravity Feed Gun, conventional, 0.051 in (1.3 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

  • Aircaps optimized for high quality spray performance
  • Lightweight, ergonomic gun
  • Lightest trigger pull in its category


  • Model: Finex
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Body Material: Metal
  • Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Standard Gravity Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.13
  • Fluid Orifice Size (in): 0.051
  • Fluid Orifice Size (mm): 1.3
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Conventional Gun
  • Gun Weight (kg): 0.54
  • Gun Weight (lb): 1.2
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 7
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 7
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
$232.00
FINEX GUN, 2, HVLP, PRESS, 1.0

FINEX GUN, 2, HVLP, PRESS, 1.0

GG 289247

GG 289247

FINEX GUN, 2, HVLP, PRESS, 1.0

Graco 289247 Finex Air Spray Pressure Feed Gun, HVLP, 0.039 in (1.0 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

  • Aircaps optimized for high quality spray performance
  • Lightweight, ergonomic gun
  • Lightest trigger pull in its category


  • Model: Finex
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Body Material: Metal
  • Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Pressure Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.10
  • Fluid Orifice Size (in): 0.039
  • Fluid Orifice Size (mm): 1.0
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: HVLP Gun
  • Gun Weight (kg): 0.37
  • Gun Weight (lb): 0.8
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 7
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 7
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
$369.00
FINEX GUN, 2, HVLP, PRESS, 1.2

FINEX GUN, 2, HVLP, PRESS, 1.2

GG 289248

GG 289248

FINEX GUN, 2, HVLP, PRESS, 1.2

Graco 289248 Finex Air Spray Pressure Feed Gun, HVLP, 0.047 in (1.2 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

  • Aircaps optimized for high quality spray performance
  • Lightweight, ergonomic gun
  • Lightest trigger pull in its category


  • Model: Finex
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Body Material: Metal
  • Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Pressure Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.12
  • Fluid Orifice Size (in): 0.047
  • Fluid Orifice Size (mm): 1.2
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: HVLP Gun
  • Gun Weight (kg): 0.37
  • Gun Weight (lb): 0.8
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 7
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 7
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
$369.00
PRO XP GUN, ES, 85KV, AA, SMART

PRO XP GUN, ES, 85KV, AA, SMART

GG H85M10

GG H85M10

PRO XP GUN, ES, 85KV, AA, SMART

Graco H85M10 Pro Xp85 Air Assist Manual Electrostatic Gun, 85 kV, with smart display, standard coatings, includes AEM or AEF tip of choice

Pro Xp85 kV air-assist gun maximizes transfer efficiency and lowers cost of ownership. Pro Xp85 AA gun line includes Standard and Smart models.

  • High quality spray performance with a one-piece aircap and variety of spray tips
  • Alternator speed indicator light ensures your turbine speed is running at the correct level
  • Smart Controls help you analyze performance, adapt to your voltage needs and make troubleshooting easier
  • Internal power supply reduces operator fatigue with no heavy cords to slow you done
  • Rugged, dependable design supported by a three year warranty
  • Every gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco&prime, s requirements


  • Model: Pro Xp
  • Series: 85
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Gender: Male
  • Air Inlet Thread Type: NPSM
  • Application: Electrostatic, Standard
  • Applicator Type: Manual
  • Coating Type: Standard
  • Compatible Paint Type: Epoxy, High Solids, Lacquers, Plural Component Materials, Polyurethanes, Solvent borne, Urethanes, UV Curing, Varnishes,
  • Display Type: Smart
  • Fluid Inlet Size (in): 1/4
  • Fluid Inlet Thread Gender: Male
  • Fluid Inlet Thread Type: NPSM
  • Gun Activation: Manual
  • Gun Type: Electrostatic
  • Gun Weight (g): 728
  • Gun Weight (kg): 0.73
  • Gun Weight (lb): 1.6
  • Gun Weight (oz): 25.68
  • Includes: Smart Display, Tip Guard Air Cap, Tip of Choice, Tool Kit, Gun Cover, Exhaust Tube,
  • Maximum Fluid Pressure (bar): 210
  • Maximum Fluid Pressure (kg/cm²): 214.14
  • Maximum Fluid Pressure (kPa): 21000
  • Maximum Fluid Pressure (MPa): 21
  • Maximum Fluid Pressure (psi): 3000
  • Maximum Fluid Temperature (°C): 48
  • Maximum Fluid Temperature (°F): 120
  • Maximum Fluid Pressure (bar): 210
  • Maximum Fluid Pressure (kg/cm²): 214.14
  • Maximum Fluid Pressure (kPa): 21000
  • Maximum Fluid Pressure (MPa): 21
  • Maximum Fluid Pressure (psi): 3000
  • Maximum Fluid Temperature (°C): 48
  • Maximum Fluid Temperature (°F): 120
  • Maximum Paint Resistivity (megohm/cm): Infinity
  • Minimum Paint Resistivity (megohm/cm): 3
  • Overall Length (cm): 27.18
  • Overall Length (in): 10.7
  • Overall Length (mm): 271.8
$11,030.00
PRO XP GUN, ES, 40KV, SMART

PRO XP GUN, ES, 40KV, SMART

GG L40M10

GG L40M10

PRO XP GUN, ES, 40KV, SMART

Pro Xp40 Air Spray Manual Electrostatic General Gun Model, 40 kV, 0.055 in (1.5 mm) nozzle, smart display, standard coatings Available in 40 kV, this general model is the smallest profile gun with an internal power supply on the market. It comes with smart technology that empowers you to maximize efficiency and productivity. For applying Class A or decorative finishes with standard and specialty coatings Smart controls help you analyze performance, adapt to your voltage needs and make troubleshooting easier. Painters experience less muscle strain and fatigue when spraying with the ergonomic, lightweight electrostatic gun model. Electrostatic air spray gun meets strict requirements for spray pattern, mechanical and electrical performance. Durable, easy-to-repair components are backed by a three-year warranty and A+ Service.
$5,730.00
PRO XP GUN, ES, 60KV, HC

PRO XP GUN, ES, 60KV, HC

GG L60T16

GG L60T16

PRO XP GUN, ES, 60KV, HC

Graco L60T16 Pro Xp60 Air Spray Manual Electrostatic High Conductivity Gun, 60 kV, 0.055 in (1.5 mm) precision high wear nozzle, standard display

This 60 kV high conductivity model produces material savings and excellent finish quality with a small, light gun body that’s easy to spray.

Application: For spraying low resistivity materials, such as abrasives and metallic coatings
  • Metal tip precision high-wear nozzle, high-wear electrode, and more durable fluid tube improve longevity.
  • Removable black fluid tube cover allows operator to see fluid movement.
  • Smart Controls help you analyze performance, adapt to your voltage needs and make troubleshooting easier
  • Made in the USA


  • Model: Pro Xp
  • Series: 60
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Gender: Male
  • Air Inlet Thread Type: NPSM
  • Application: Electrostatic, High Conductivity, High Wear
  • Applicator Type: Manual
  • Coating Type: Abrasive, Metallic, High Conductivity, High Wear
  • Compatible Paint Type: Automotive, Base Coat, Clear Coat, Enamels, High Solids, Metallics, Plural Component Materials, Primers, Solvent borne, Urethanes
  • Display Type: Standard
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Thread Gender: Male
  • Fluid Inlet Thread Type: NPSM
  • Gun Activation: Manual
  • Gun Type: Electrostatic
  • Gun Weight (g): 600
  • Gun Weight (kg): 0.6
  • Gun Weight (lb): 1.32
  • Gun Weight (oz): 21.16
  • Includes: Air Cap, Nozzle, Tool Kit, Gun Cover, Exhaust Tube
  • Maximum Fluid Pressure (bar): 7.0
  • Maximum Fluid Pressure (kg/cm²): 7.14
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 48
  • Maximum Fluid Temperature (°F): 120
  • Maximum Fluid Pressure (bar): 7.0
  • Maximum Fluid Pressure (kg/cm²): 7.14
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 48
  • Maximum Fluid Temperature (°F): 120
  • Maximum Paint Resistivity (megohm/cm): 25
  • Minimum Paint Resistivity (megohm/cm): 1
  • Nozzle Size (cm): 0.15
  • Nozzle Size (in): 0.055
  • Nozzle Size (mm): 1.5
  • Overall Length (cm): 24.13
  • Overall Length (in): 9.5
  • Overall Length (mm): 241.3
$8,470.00
PRO XP GUN, ES, 85KV, 1.2

PRO XP GUN, ES, 85KV, 1.2

GG L85T12

GG L85T12

PRO XP GUN, ES, 85KV, 1.2

Pro Xp85 Air Spray Manual Electrostatic General Gun Model, 85 kV, 0.047 in (1.2 mm) nozzle, standard display, standard coatings Available in 85 kV, this general model is the smallest profile gun with an internal power supply on the market. The 1.2 mm nozzle is for lower fluid flow. For applying Class A or decorative finishes with standard and specialty coatings Painters experience less muscle strain and fatigue when spraying with the ergonomic, lightweight electrostatic gun model. Electrostatic air spray gun meets strict requirements for spray pattern, mechanical and electrical performance. Durable, easy-to-repair components are backed by a three-year warranty and A+ Service.
$9,330.00
XTR+ GUN, XTR5+, 1" HND, 4FNG, XHDRAC

XTR+ GUN, XTR5+, 1" HND, 4FNG, XHDRAC

GG XTR524

GG XTR524

XTR+ GUN, XTR5+, 1" HND, 4FNG, XHDRAC

Graco XTR524 XTR5+ Airless Spray Gun, Round Handle, 4-Finger Trigger, XHD RAC Tip

New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, you&prime, ll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.

Application: Designed to conquer the toughest protective coatings.
  • Self-locking needle design for faster rebuilds
  • XHD RAC tip provides exceptional life, pattern and finish
  • Easily remove and clean gun filter with trigger guard integrated wrench


  • Model: XTR5+
  • Maximum Working Pressure (bar): 345
  • Maximum Working Pressure (MPa): 34.5
  • Maximum Working Pressure (psi): 5000
$534.00
XTR+ GUN, XTR7+, 1" HND, 4FNG, NO TIP

XTR+ GUN, XTR7+, 1" HND, 4FNG, NO TIP

GG XTR720

GG XTR720

XTR+ GUN, XTR7+, 1" HND, 4FNG, NO TIP

XTR7+ Airless Spray Gun, Round Handle, 4-Finger Trigger, No Tip New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, you'll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer. Designed to conquer the toughest protective coatings. Self-locking needle design for faster rebuilds XHD Tip Guard compatible with XHD RAC tips Easily remove and clean gun filter with trigger guard integrated wrench XTR7+ maximum fluid pressure: 7250psi (500 bar, 50 MPa)
$561.00
WS-200, WS200SP-1401 (1.4)

WS-200, WS200SP-1401 (1.4)

IW 4696

IW 4696

WS-200, WS200SP-1401 (1.4)
$908.59
Gun Jet Assy Polypropolene

Gun Jet Assy Polypropolene

SSI AA30L-PP

SSI AA30L-PP

Gun Jet Assy Polypropolene
$128.85
Picture of 18in Extension For 2001 Gun

18in Extension For 2001 Gun

BB 52-408

BB 52-408

18in Extension For 2001 Gun
$2,006.64
Refine
×
Manufacturer