Kits

GG 77X500

KIT, PLATE, FOLLOWER, 60#/90#

Dyna-Star® Accessories - Follower Plate for 60 lb./90 lb. Graco Tank for Tube-in-Tube Follower plate for Graco 60 pound and 90 pound Graco tank for tube-in-tube.

GG 77X511

KIT, PLATE, FOLLOWER, 120#

Dyna-Star® Accessories - Follower Plate for 120 lb. Drum with Tube-in-Tube For Electric Dyna-Star® Pump Systems

GG 77X512

KIT, PLATE, FOLLOWER, 400#

Dyna-Star® Accessories - Follower Plate for 400 lb. (180 kg) Drum with Tube-in-Tube For Electric Dyna-Star® Pump Systems

GG 77X960

KIT, EDS HP, AFSO, LL, 60#

Graco 77X960 Dyna-Star® 24 VDC HP Pump, AFSO, Low Level, GLC 2200, Wiring Harness, Cables, Pressure Switch, Remote Fill Manifold for 60 lb (27 kg).

Heavy-duty construction and mining equipment rely on fresh lubricant to flush contaminants from critical pivot points. An automatic lubrication system from Graco provides continuous lube replenishment, reducing expensive component failures to keep your equipment working.

Application: Electric pumps for heavy duty automatic lubrication and transfer systems.

• Auto Fill Shut Off - mechanical shut off of fill pump for clean and efficient refill
• Graco Advantage Drive - heavy duty gear drive - lubed for life
• Tube-in-tube vent and fill path - convert drum to injector system instantly
• Motor control - speed and AMP control
• Cold weather performance (-40°C)
• More efficient seal replacement
• Remote Fill Manifold with Vent (with built in pressure gauge) allows you to conveniently locate the fill port where you want it

• Model: Dyna-Star

• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35

• Application: On-Road Vehicles, Off-Road Equipment

• Compatible Material: Grease

• Fluid Outlet Size (in): 0.375
• Fluid Outlet Size (mm): 9.5250
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT

• Includes: 24 VDC HP pump with Auto-Fill Shutoff and Low-Level Monitor, GLC2200 Controller, Wiring Harness, Low-Level Sensor Cable, Power Cable, Pressure Switch, Remote Fill Manifold for 60 pound (27 kg) reservoir

• IP Rating: IP69K

• Maximum NLGI Grade: #2

• Maximum Working Pressure (bar): 344
• Maximum Working Pressure (kPa): 34400
• Maximum Working Pressure (MPa): 34.4
• Maximum Working Pressure (psi): 5000

• Minimum cST Grade (cST): 40

• Minimum Voltage (V dc): 18

• Motor Type: Electric Motor

• Overall Depth (cm): 41
• Overall Depth (in): 16.13
• Overall Depth (mm): 410

• Overall Height (cm): 77.5
• Overall Height (in): 30.5
• Overall Height (mm): 775
• Overall Width (cm): 36.8
• Overall Width (in): 14.5
• Overall Width (mm): 368

• Power Connection Type: M12

• Power Type: Electric

GG FK1222

KIT, 1040 FG SS, SP, SP, EP

SaniForce 1040 FG Complete Fluid Repair Kit with SS Seat, SP Ball, SP Diaphragm, EP Seal

GG FK3222

KIT, 2150 FG SS, SP, SP, EP

SaniForce 2150 FG Complete Fluid Repair Kit with SS Seat, SP Ball, SP Diaphragm, EP Seal

GG FX250SK

KIT, G250M, INIFLEX, LINK

IniFlex Meter, 50 ft (15.2 m) meter cable, IniFlex Link (x2) outlet connection Whether you’re setting up a new automated finishing system or upgrading a current installation, IniFlex makes accommodating diverse requirements and budgets more flexible than ever before. IniFlex fits into almost any industrial automation application that requires compact color change valves.

GG FX250SS

KIT, G250M, INIFLEX, QS

IniFlex Meter, 50 ft (15.2 m) meter cable, Quick Socket & IniFlex link outlet connection Whether you’re setting up a new automated finishing system or upgrading a current installation, IniFlex makes accommodating diverse requirements and budgets more flexible than ever before. IniFlex fits into almost any industrial automation application that requires compact color change valves. To connect directly to your proportioner system, use Quick Socket outlet and fittings.

GG FX250XX

KIT, G250M, INIFLEX

IniFlex Meter Whether you’re setting up a new automated finishing system or upgrading a current installation, IniFlex makes accommodating diverse requirements and budgets more flexible than ever before. IniFlex fits into almost any industrial automation application that requires compact color change valves.

GG FXCC0001

KIT, NON CIRC VALVE, INIFLEX

IniFlex Color Stack, 1 non-circulation valve Whether you’re setting up a new automated finishing system or upgrading a current installation, IniFlex makes accommodating diverse requirements and budgets more flexible than ever before. IniFlex fits into almost any industrial automation application that requires compact color change valves. Color change valve assembly flushes cleanly without material dead spots, minimizing flushing times and solvent use. IniFlex color change valves are designed, manufactured, assembled, and factory-tested in the United States of America.

GG FXCC0100

KIT, CIRCULATION VALVE, INIFLEX

IniFlex Color Stack, 1 circulation valve Flushing a system in between color changes can waste time, material, and money. That’s why this IniFlex color change valve assembly is designed to flush cleanly – without a lot of solvent. IniFlex fits into almost any industrial automation application that requires compact color change valves. IniFlex color change valves are designed, manufactured, assembled, and factory-tested in the United States of America.

GG FXRG1T

KIT, 1:1 REGULATOR, FC, INIFLEX

IniFlex Regulator, 1:1 ratio, transducer fitting Whether you’re setting up a new automated finishing system or upgrading a current installation, IniFlex makes accommodating diverse requirements and budgets more flexible than ever before. IniFlex fits into almost any industrial automation application that requires compact color change valves.

GG FXRG1X

KIT, 1:1 REGULATOR, INIFLEX

IniFlex Regulator, 1:1 ratio Whether you’re setting up a new automated finishing system or upgrading a current installation, IniFlex makes accommodating diverse requirements and budgets more flexible than ever before. IniFlex fits into almost any industrial automation application that requires compact color change valves.

GG FXRG2X

KIT, 1:2 REGULATOR, INIFLEX

IniFlex Regulator, 1:2 ratio Whether you’re setting up a new automated finishing system or upgrading a current installation, IniFlex makes accommodating diverse requirements and budgets more flexible than ever before. IniFlex fits into almost any industrial automation application that requires compact color change valves.

GG FXRG3X

KIT, 1:3 REGULATOR, INIFLEX

IniFlex Regulator, 1:3 ratio Whether you’re setting up a new automated finishing system or upgrading a current installation, IniFlex makes accommodating diverse requirements and budgets more flexible than ever before. IniFlex fits into almost any industrial automation application that requires compact color change valves.

GG PC20FL

KIT, PC CHAMBER, FL, 000

Fusion ProConnect Flat 000 Mix Chamber with 0.020 in (0.51 mm) Orifice Size The Fusion ProConnect Flat 000 Mix Chamber is designed for sprayers that prefer a flat spray pattern. All Fusion PC Mix Chambers are protected by an ultra-durable Chromex coating and have been engineered to smoothly slide into position without damaging the side seals. In addition, these mix chambers incorporate an alignment groove specifically designed to ensure proper assembly. Designed for durability and smooth assembly Ultra durable Chromex coating Ramp design for quick assembly and proper sealing Alignment groove ensures proper assembly Available in a variety of sizes and spray patterns

GG PC22WD

KIT, PC CHAMBER, WD, 2222

Fusion ProConnect Wide 2222 Mix Chamber with 0.022 in (0.56 mm) Orifice Size The Fusion ProConnect Wide 2222 Mix Chamber is designed for sprayers that prefer a wide spray pattern. All Fusion PC Mix Chambers are protected by an ultra-durable Chromex coating and have been engineered to smoothly slide into position without damaging the side seals. In addition, these mix chambers incorporate an alignment groove specifically designed to ensure proper assembly. Designed for durability and smooth assembly Ultra durable Chromex coating Ramp design for quick assembly and proper sealing Alignment groove ensures proper assembly Available in a variety of sizes and spray patterns

GG PC47RD

KIT, PC CHAMBER, RND, 01-02

Fusion ProConnect Round 01-02 Mix Chamber with 0.047 in (1.2 mm) Orifice Size The Fusion ProConnect Round 01-02 Mix Chamber is designed for sprayers that prefer a round spray pattern. All Fusion PC Mix Chambers are protected by an ultra-durable Chromex coating and have been engineered to smoothly slide into position without damaging the side seals. In addition, these mix chambers incorporate an alignment groove specifically designed to ensure proper assembly. Designed for durability and smooth assembly Ultra durable Chromex coating Ramp design for quick assembly and proper sealing Alignment groove ensures proper assembly Available in a variety of sizes and spray patterns

GG PC52FL

KIT, PC CHAMBER, FL, 02

Fusion ProConnect Flat 02 Mix Chamber with 0.052 in (1.3 mm) Orifice Size The Fusion ProConnect Flat 02 Mix Chamber is designed for sprayers that prefer a flat spray pattern. All Fusion PC Mix Chambers are protected by an ultra-durable Chromex coating and have been engineered to smoothly slide into position without damaging the side seals. In addition, these mix chambers incorporate an alignment groove specifically designed to ensure proper assembly. Designed for durability and smooth assembly Ultra durable Chromex coating Ramp design for quick assembly and proper sealing Alignment groove ensures proper assembly Available in a variety of sizes and spray patterns

IR 02A-VAR-KIT

Edge Series 2-Inch Surface Prep Sanding Kit, 7-Piece

Not sure what abrasives you need? These starter kits offer all the products needed to get started with your job. Each pack includes one each of 35, 50, & 80 grit sanding discs and one each of coarse, medium, and fine surface conditioning discs. The pack also includes backing pad and post.

Includes: Includes one each of 35, 50, & 80 grit sanding discs and one each of coarse, medium, and fine surface condtitioning discs. The pack also includes backing pad and post.
Product Application and Uses: For use with 1/4" Collet Die Grinders
Arbor/Collet: 1/4"
Product Length (in): 2.75
Product Width (in): 1.75
Product Height (in): 8.5
Product Weight (lb): 0.4

For Use With

• 301B
• 301B-M
• 301B2MK
• 301B32MK
• 301B3MK
• 301BK
• 3101G
• 3107G

IR 2115M-BOOT-LED

2115M-Protective Boot and LED Light Kit

Ingersoll Rand's tool boots absorb vibrations and protect the tool from external damage.

Features And Benefits

• Protects surrounding surfaces from scratches, nicks ect.
• Protects tool from damage if dropped.
• Adds further protection from unwanted contaminates that can affect tool performance.

Color: Grey

IR BL2012C

IQV 20V 2.5Ah Lithium-Ion Battery and Charger Kit for Ingersoll Rand Power Tools

Features And Benefits

• Kit Includes: 20V 2.5Ah Battery and 20V Battery Charger
• Battery includes 4-LED Fuel Gauge to monitor state of charge.
• Intelligent Battery Management System protects against over loading, over charging and over discharging for longer tool and battery life.
• Charger is wall-mountable and features audible chime when charging completed.
• Battery is compatible with all IQV20 series power tools and charger charges all IQV20™ batteries with 4A charge rate.

Includes: (1) 20V 2.5Ah Battery and (1) 20V Single Port Charger.
Product Application and Uses: For use with any Ingersoll Rand IQV® 20 Series cordless power tool.
Battery Capacity (Ah): 2.5
Battery Capacity (Wh): 49
Charge Time: 40 minutes
Color: Grey
Number of Battery Cells: 5
Power Source: Battery Powered
Voltage DC: 20
Warranty: 2-year
Battery Type: Tabbed

IR G1811-KIT-BELT

Replacement Belt Kit for Ingersoll Rand G1811 Belt Sander

Superseded To

• 360-313-KIT-BELT

IR HG2-DGTKH

Tune-up Kit for Ingersoll Rand HG2 Series Grinder

For Use With

• M2H180RG4
• M2H250RG4

IR IQV20-2032

20V Cordless Combo Kit, 3/8″Ratchet, 3/8″Impact Wrench, 2 Batteries, Tool Bag

Includes: R3130 3/8″Ratchet, W5130 3/8″Impact Wrench, (2) BL2012 2.5Ah Batteries, 20V Battery Charger, Tool Bag
Warranty: 3-year tool, 2-year Battery, 3-year Charger