Impacts
BOOT
IR 261-BOOT
IR 261-BOOT
Protective Boot for Ingersoll Rand 261 Series Impact Wrench
Ingersoll Rand's tool boots absorb vibrations and protect the tool from external damage.Features And Benefits
- Protects surrounding surfaces from scratches, nicks ect.
- Protects tool from damage if dropped.
- Adds further protection from unwanted contaminates that can affect tool performance.
Color: Red
Housing Material: Thermoplastic Polymer
For Use With
- 261
- 261-3
- 261-6
$45.00
HAMMER KIT
IR 261-THK1
IR 261-THK1
Tune-up Kit for Ingersoll Rand 261 Series Impact Wrench
For Use With- 261
$212.00
IMPACTOOL
IR 290
IR 290
1" Air Impact Wrench, Super Duty, 1600 ft-lb Torque, Thru-hole Retainer, Pistol
With a steel hammer case and metal housing, the 290 Series is built for heavy duty jobs. Through repeated drops in the garage or harsh outdoor weather conditions, this wrench will see you through every job.Features And Benefits
- Reliability: Built to last, the 290 Series will work like new every time you use it.
- Great Power-to-Weight Ratio: Thanks to the 290 Series’ jumbo hammer impact mechanism, these wrenches provide increased control without an increase of effort.
- 3-way Adjustable Handle: Designed for getting into cramped spaces with big power.
Product Application and Uses: Designed for getting into cramped spaces with big power and great for spring work, tractor pads, bus maintenance, off-road equipment, and farm equipment.
Actuation/Throttle Type/Switch Type: Trigger
Air Consumption @ Load (cfm): 55
Air Consumption @ Load (l/min): 1557
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Average Air Consumption (cfm): 10
Average Air Consumption (l/min): 283
Blows per Min: 800
Color: Grey
Configuration/Handle Type: Pistol Grip
Drive Size (in): 1
Drive Type: Square
Duty Rating: Super Duty
End Plates: Bronze
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 101.6 / 112.6
Hammer Case: Steel
Handle Material: Composite
Housing Material: Impact and chemical-resistant composite housing and patented steel reinforced frame
Impact Mechanism: Jumbo Hammer
Max Bolt Diameter (in): 1.25
Max Free Speed (rpm): 6000
Max Pressure (bar): 6.2
Max Torque (ft-lb): 1600
Max Torque (in-lb): 19197
Max Torque (nm): 2169
Min Hose Size (in): 1/2
Motor: Non-Biased
Number of Power Settings: Continuous
Power Source: Air Powered
Product Length (in): 9.75
Product Weight (lb): 21.9
Recommended Forward Torque Range (ft-lb): 150-1000
Recommended Forward Torque Range (in-lb): 1797-12002
Recommended Forward Torque Range (nm): 203-1356
Retainer Type: Thru-hole
Speed Setting: Variable Speed
Standards/Certifications: CE
Tool Type: Full-size
Vanes: 6
Vibration Level (m/s2): 22.7
Warranty: 1-year
Similar IR
- 280
$4,500.00
TUNE-UP KIT
IR 2906P-TK1
IR 2906P-TK1
Tune-up Kit for Ingersoll Rand 2960P Series Air Impact Wrench
Includes: oil chamber plug seal, throttle valve seat, throttle valve, throttle valve spring, oiler body seal, exahust silencer, reverse valve bushing seal (2), trigger pin, reverse valve ball dentent, reverse valve dentent spring, housing cover gasket, rear rotor bearing, vane pack (6), front rotor bearing, hammer case gasket, socket retainer plunger and plunger springFor Use With
- 2906P1
$137.00
TUNE-UP KIT
IR 290-TK2
IR 290-TK2
Tune-up Kit for Ingersoll Rand 290 Series Impact Wrench
Includes: Throttle Valve Plunger, Stop Pin, Oiler Felt, Seal, Vane Pack, Bearings, Handle Gasket, O-rings, Spring Pack, BallFor Use With
- 290
$118.00
IMPACTOOL
IR 293
IR 293
1" Air Impact Wrench, Super Duty, 2000 ft-lb Torque, Thru-hole Retainer, Pistol
With a twin hammer impact mechanism and a finely tuned motor, the 293 Series is great for any job, from vehicle repair, to heavy machinery.Features And Benefits
- Durability: This wrench can withstand drops or harsh conditions, thanks to its steel hammer case and metal housing.
- Reliability: With a twin hammer impact mechanism that delivers even blows every time, and a power regulator that helps keep control, you’ll never doubt that this wrench will perform the way you want it to. Comes with a 1-year warranty.
- Safety: Thanks to its square thru-hole anvil, this wrench offers a stronger connection to the socket, so you never have to sacrifice performance for safety.
Product Application and Uses: This pneumatic impact wrench is especially suited for working on trucks, agricultural equipment, and other heavy duty machinery.
Actuation/Throttle Type/Switch Type: Trigger
Air Consumption @ Load (cfm): 64
Air Consumption @ Load (l/min): 1812
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Average Air Consumption (cfm): 12
Average Air Consumption (l/min): 340
Blows per Min: 810
Color: Grey
Configuration/Handle Type: Pistol Grip
Drive Size (in): 1
Drive Type: Square
Duty Rating: Super Duty
End Plates: Bronze
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 87.3 / 98.3
Hammer Case: Steel
Handle Material: Composite
Housing Material: Aluminum core with composite sleeve
Impact Mechanism: Twin Hammer
Max Bolt Diameter (in): 1.375
Max Free Speed (rpm): 3500
Max Pressure (bar): 6.2
Max Torque (ft-lb): 2000
Max Torque (in-lb): 24003
Max Torque (nm): 2712
Min Hose Size (in): 3/4
Motor: Non-Biased
Number of Power Settings: Continuous
Power Source: Air Powered
Product Length (in): 11.3
Product Width (in): 4
Product Height (in): 6
Product Weight (lb): 22.8
Recommended Forward Torque Range (ft-lb): 1000-1600
Recommended Forward Torque Range (in-lb): 12002-19197
Recommended Forward Torque Range (nm): 1356-2169
Retainer Type: Thru-hole
Side to Center Distance (in): 2
Side to Center Distance (mm): 51
Speed Setting: Variable Speed
Standards/Certifications: CE
Tool Type: Full-size
Vanes: 6
Vibration Level (m/s2): 18.1
Warranty: 1-year
Similar IR
- 285B
- 2850MAX
$4,452.00
