GRACO INC. S10595
GRACO INC. S10595 branded products
SANIFORCE PAIL UNLOADER SYSTEM, RAM, HYGIENIC
GG SPU.A01AAB1AA0C21
GG SPU.A01AAB1AA0C21
SANIFORCE PAIL UNLOADER SYSTEM, RAM, HYGIENIC
SaniForce Pail Unit, Stainless Steel Frame, 6:1 PP, Buna Wiper Seal, Exposed Controls SaniForce Pail Unloader systems are built to handle your thickest, toughest food, personal care, and pharmaceutical ingredient transfer. With up to 99% evacuation rates the SaniForce systems reduce product waste while providing a solution to transfer products up to 1,000,000 cps utilizing sanitary designed high pressure piston pumps. Ram systems increase food safety by creating a sealed system with the container and improve worker ergonomics by preventing injury due to manual scooping and dumping of containers and ingredients. The overall system is able to accomodate 5 and 7 gallon (19 and 26 litre) pail sizes. High-pressure sanitary/hygienic container unloading for ingredients or products up to 1,000,000 cps Reduce material waste with up to 99% material evacuation Improve worker ergonomics by eliminating hazards associated with scooping and dumping options Improve food safety by creating a sealed system with the container and inflatable seal design - eliminates food contamination from air borne or worker contaminates Self-priming and run dry pump capabilities ideal for container unloading applications $20,400.00
Assembly, Mounting, Pump, Slave, Hybrid
GG SSP-160-XX
GG SSP-160-XX
Assy, Mounting, Pump, Slave, Hybrid $1,335.00
Assembly, Pump, Slave, Mix, External
GG SSP-190-02
GG SSP-190-02
Assy, Pump, Slave, Mix, External $6,570.00
Check-Mate Tandem Supply Unit, 63:1, Pxover, D60, 20L
GG TC1677
GG TC1677
Check-Mate Tandem Supply Unit, 63:1, Pxover, D60, 20L $50,620.00
Check-Mate Tandem Supply Unit, 63:1, Xovr, 6.5, 200L
GG TC176S
GG TC176S
Check-Mate Tandem Supply Unit, 63:1, Xovr, 6.5, 200L $79,390.00
Check-Mate Tandem Supply Unit, 63:1, Xovr, 6.5, 200L
GG TC186S
GG TC186S
Check-Mate Tandem Supply Unit, 63:1, Xovr, 6.5, 200L $83,430.00
Check-Mate Tandem Supply Unit, 68:1, Exover, 3.0, 200L
GG TC2R6M
GG TC2R6M
CHECK-MATE TANDEM SUPPLY UNIT,68:1,EXOVER,3.0,200L
Graco TC2R6M 68:1 Ratio 200 L 3.0 RAM Tandem Supply Unit with EPDM Wiper Plate
Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.
Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.- For large drums up to 200 liter (55 gal)
- Graco D200 - For high-volume in-plant applications
- Industry-first controls give you immediate and important information at the touch of a button
- Platen wipers can be replaced in seconds
- Pump's quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
- High-quality, durable parts reduce maintenance time, maximize uptime
$74,470.00
Check-Mate Tandem Supply Unit, 36:1, Xovr, 3.0, 200L
GG TC2J2L
GG TC2J2L
Check-Mate Tandem Supply Unit, 36:1, Xovr, 3.0, 200L $120,050.00
Check-Mate Tandem Supply Unit, 23:1, Pxover, 3.0, 200L
GG TC257A
GG TC257A
Check-Mate Tandem Supply Unit, 23:1, Pxover, 3.0, 200L $83,140.00
Check-Mate Tandem Supply Unit, 38:1, Pxover, S20, 20L
GG TC8C73
GG TC8C73
Check-Mate Tandem Supply Unit, 38:1, Pxover, S20, 20L $42,460.00
Check-Mate Tandem Supply Unit, 68:1, Exover, 6.5, 200L
GG TC2S6G
GG TC2S6G
CHECK-MATE TANDEM SUPPLY UNIT,68:1,EXOVER,6.5,200L
$89,700.00
QUANTM PUMP, QTE-ALFC1TPACTP-A100
GG TE120-0000
GG TE120-0000
QUANTM PUMP, QTE-ALFC1TPACTP-A100
QUANTM i120, 2"NPT, Aluminum Electric Diaphragm Pump, 200-240 V, AL Center, TP Seat, AC Ball, TP Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The all-aluminum fluid section is specifically designed to be abrasion-resistant while also providing mild corrosion resistance. With up to 8x more continuous torque at low speeds than conventional motors, this general-purpose electric pump is an energy-saving workhorse that is ideal for sump evacuation applications as well as applications involving the evacuation of petroleum products (new and waste oils) and evacuation of solvents. This powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Not for use with halogenated hydrocarbons. Revolutionary Design- Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
- Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
- Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
- Quiet operation reduces plant noise and improves employee safety and health
- Smart pump control provides more accurate flow set points and built-in I/O
- Powder-coated aluminum electric drive
- 240 VAC 3Ph motor with 15 ft cord and NEMA L15-20 plug
- Non-hazardous
- Aluminum fluid section with NPT end port
- Internal components include TPE (Hytrel) seat, acetal ball, TPE (Hytrel) diaphragm and TPE (Hytrel) manifold o-ring
$4,650.00
Check-Mate Tandem Supply Unit, 29:1, Exover, D60, 20L
GG TC3468
GG TC3468
Check-Mate Tandem Supply Unit, 29:1, Exover, D60, 20L $75,460.00
Dura-Flo Tandem Supply Unit, 47:1, Pxover, 6.5, 200L
GG TDEM8R
GG TDEM8R
DURA-FLO TANDEM SUPPLY UNIT, 47:1, PXOVER, 6.5, 200L
Graco TDEM8R Tandem Supply Unit, Check-Mate, 47:1, Pneumatic Xover, 6.5 in. Ram, 200L, Single EPDM Wiper
Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.
Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.- For large drums up to 200 liter (55 gal)
- Graco D200s - For heavy-duty, high-volume applications of high-viscosity materials. Provides more down-force for difficult-to-move materials
- Industry-first controls give you immediate and important information at the touch of a button
- Platen wipers can be replaced in seconds
- Pump's quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
- High-quality, durable parts reduce maintenance time, maximize uptime
- Ambient/Warm Melt/Hot Melt: Ambient
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
- Container Type: Drum
- Material Container Volume (gal): 52.8
- Material Container Volume (l): 200
- Maximum Air Inlet Pressure (bar): 8.62
- Maximum Air Inlet Pressure (kg/cm²): 8.79
- Maximum Air Inlet Pressure (kPa): 862
- Maximum Air Inlet Pressure (psi): 125
- Maximum Flow Rate (GPM): 6.9
- Maximum Flow Rate (L/min): 26.1
- Maximum Fluid Pressure (bar): 324.1
- Maximum Fluid Pressure (kPa): 32410
- Maximum Fluid Pressure (psi): 4700
- Maximum Fluid Pressure (bar): 324.1
- Maximum Fluid Pressure (kPa): 32410
- Maximum Fluid Pressure (psi): 4700
- Maximum Operating Temperature (°C): 49
- Maximum Operating Temperature (°F): 120
- Power Type: Pneumatic
- Pump Ratio: 47:1
- Pump Type: Double Ball
- Ram Material: Carbon Steel
$109,590.00
Dura-Flo Tandem Supply Unit, 35:1, Pxover, 6.5, 200L
GG TDFL8R
GG TDFL8R
Dura-Flo Tandem Supply Unit, 35:1, Pxover, 6.5, 200L $106,580.00
Check-Mate Tandem Supply Unit, 29:1, Exover, D60, 20L
GG TC3368
GG TC3368
Check-Mate Tandem Supply Unit, 29:1, Exover, D60, 20L $70,610.00
QUANTM PUMP, QTE-ALFC1GEGEGEPTA100
GG TE120-0003
GG TE120-0003
QUANTM PUMP, QTE-ALFC1GEGEGEPTA100
QUANTM i120, 2"NPT, Aluminum Electric Diaphragm Pump, 200-240 V, AL Center, GE Seat, GE Ball, GE Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The all-aluminum fluid section is specifically designed to be abrasion-resistant while also providing mild corrosion resistance. With up to 8x more continuous torque at low speeds than conventional motors, this general-purpose electric pump is an energy-saving workhorse that is ideal for sump evacuation applications as well as applications involving the evacuation of petroleum products (new and waste oils) and evacuation of solvents. This powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Not for use with halogenated hydrocarbons. Revolutionary Design- Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
- Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
- Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
- Quiet operation reduces plant noise and improves employee safety and health
- Smart pump control provides more accurate flow set points and built-in I/O
- Powder-coated aluminum electric drive
- 240 VAC 3Ph motor with 15 ft cord and NEMA L15-20 plug
- Non-hazardous
- Aluminum fluid section with NPT end port
- Internal components include Geolast® seat, Geolast® ball, Geolast® diaphragm and PTFE manifold o-ring
$4,680.00
QUANTM PUMP, QTE-PPFC1PPPTPSPTP200
GG TE120-0004
GG TE120-0004
QUANTM PUMP, QTE-PPFC1PPPTPSPTP200
QUANTM i120, 2"Flange, Polypropylene Electric Diaphragm Pump, 200-240 V, AL Center, PP Seat, PT Ball, PS Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. Designed with a chemical-resistant polypropylene fluid section that provides high corrosion resistance, this groundbreaking electric pump is built to efficiently handle fluid transfer applications involving most chemicals and detergents, sump evacuation applications, as well as applications involving high and low pH materials. With up to 8x more continuous torque at low speeds than conventional motors, this powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Revolutionary Design- Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
- Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
- Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
- Quiet operation reduces plant noise and improves employee safety and health
- Smart pump control provides more accurate flow set points and built-in I/O
- Powder-coated aluminum electric drive
- 240 VAC 3Ph motor with 15 ft cord and NEMA L15-20 plug
- Non-hazardous
- Polypropylene fluid section with end flange
- Internal components include polypropylene seat, PTFE ball, PTFE/Santoprene 2-piece diaphragm and PTFE manifold o-ring
$9,250.00
QUANTM PUMP, QTE-ALFC1SSPTPSPTA100
GG TE120-0006
GG TE120-0006
QUANTM PUMP, QTE-ALFC1SSPTPSPTA100
QUANTM i120, 2"NPT, Aluminum Electric Diaphragm Pump, 200-240 V, AL Center, SS Seat, PT Ball, PS Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The all-aluminum fluid section is specifically designed to be abrasion-resistant while also providing mild corrosion resistance. With up to 8x more continuous torque at low speeds than conventional motors, this general-purpose electric pump is an energy-saving workhorse that is ideal for sump evacuation applications as well as applications involving the evacuation of petroleum products (new and waste oils) and evacuation of solvents. This powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Not for use with halogenated hydrocarbons. Revolutionary Design- Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
- Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
- Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
- Quiet operation reduces plant noise and improves employee safety and health
- Smart pump control provides more accurate flow set points and built-in I/O
- Powder-coated aluminum electric drive
- 240 VAC 3Ph motor with 15 ft cord and NEMA L15-20 plug
- Non-hazardous
- Aluminum fluid section with NPT end port
- Internal components include 316 stainless steel seat, PTFE ball, PTFE/Santoprene 2-piece diaphragm and PTFE manifold o-ring
$6,180.00
Quantm Pump, Qte-Alfc1Spspsppta200
GG TE120-0009
GG TE120-0009
Quantm Pump, Qte-Alfc1Spspsppta200 $4,680.00
Quantm Pump, Qte-Alfc1Bnbnbn-A200
GG TE120-0008
GG TE120-0008
Quantm Pump, Qte-Alfc1Bnbnbn-A200 $4,880.00
Quantm Pump, Qte-Alfc1Gegegepta200
GG TE120-0002
GG TE120-0002
Quantm Pump, Qte-Alfc1Gegegepta200 $4,680.00
QUANTM PUMP, QTE-CIFC1GEGEGEPTI100
GG TE120-0013
GG TE120-0013
QUANTM PUMP, QTE-CIFC1GEGEGEPTI100
QUANTM i120, 2"NPT, Cast Iron Electric Diaphragm Pump, 200-240 V, AL Center, GE Seat, GE Ball, GE Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. Designed with a cast iron fluid section, this groundbreaking electric pump is built to efficiently handle many fluid transfer applications. With up to 8x more continuous torque at low speeds than conventional motors, this powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Revolutionary Design- Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
- Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
- Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
- Quiet operation reduces plant noise and improves employee safety and health
- Smart pump control provides more accurate flow set points and built-in I/O
- Powder-coated aluminum electric drive
- 240 VAC 3Ph motor with 15 ft cord and NEMA L15-20 plug
- Non-hazardous
- Cast iron fluid section with NPT end port
- Internal components include Geolast® seat, Geolast® ball, Geolast® diaphragm and PTFE manifold o-ring
$6,390.00
Check-Mate Tandem Supply Unit, 68:1, Exover, 3.0, 200L
GG TC2S6M
GG TC2S6M
Check-Mate Tandem Supply Unit, 68:1, Exover, 3.0, 200L $83,540.00
QUANTM PUMP, QTE-ALFC1SAPTPSPTA200
GG TE120-0011
GG TE120-0011
QUANTM PUMP, QTE-ALFC1SAPTPSPTA200
QUANTM i120, 2"BSPT, Aluminum Electric Diaphragm Pump, 200-240 V, AL Center, SS Seat, PT Ball, PS Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The all-aluminum fluid section is specifically designed to be abrasion-resistant while also providing mild corrosion resistance. With up to 8x more continuous torque at low speeds than conventional motors, this general-purpose electric pump is an energy-saving workhorse that is ideal for sump evacuation applications as well as applications involving the evacuation of petroleum products (new and waste oils) and evacuation of solvents. This powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Not for use with halogenated hydrocarbons. Revolutionary Design- Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
- Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
- Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
- Quiet operation reduces plant noise and improves employee safety and health
- Smart pump control provides more accurate flow set points and built-in I/O
- Powder-coated aluminum electric drive
- 240 VAC 3Ph motor with 15 ft cord and NEMA L15-20 plug
- Non-hazardous
- Aluminum fluid section with BSPT end port
- Internal components include 316 stainless steel seat, PTFE ball, PTFE/Santoprene 2-piece diaphragm and PTFE manifold o-ring
$6,130.00
Quantm Pump, Qte-Alfc1Ppptpspta200
GG TE120-0010
GG TE120-0010
Quantm Pump, Qte-Alfc1Ppptpspta200 $5,360.00
QUANTM PUMP, QTE-ALFC1SASPSPPTA100
GG TE120-0016
GG TE120-0016
QUANTM PUMP, QTE-ALFC1SASPSPPTA100
QUANTM i120, 2"NPT, Aluminum Electric Diaphragm Pump, 200-240 V, AL Center, SS Seat, SP Ball, SP Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The all-aluminum fluid section is specifically designed to be abrasion-resistant while also providing mild corrosion resistance. With up to 8x more continuous torque at low speeds than conventional motors, this general-purpose electric pump is an energy-saving workhorse that is ideal for sump evacuation applications as well as applications involving the evacuation of petroleum products (new and waste oils) and evacuation of solvents. This powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Not for use with halogenated hydrocarbons. Revolutionary Design- Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
- Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
- Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
- Quiet operation reduces plant noise and improves employee safety and health
- Smart pump control provides more accurate flow set points and built-in I/O
- Powder-coated aluminum electric drive
- 240 VAC 3Ph motor with 15 ft cord and NEMA L15-20 plug
- Non-hazardous
- Aluminum fluid section with NPT end port
- Internal components include 316 stainless steel seat, Santoprene ball, Santoprene diaphragm and PTFE manifold o-ring
$5,090.00
Quantm Pump, Qte-Ssfc1Ppptpspts200
GG TE120-0020
GG TE120-0020
Quantm Pump, Qte-Ssfc1Ppptpspts200 $11,430.00
QUANTM PUMP, QTE-CIFC1SPSPSPPTI100
GG TE120-0021
GG TE120-0021
QUANTM PUMP, QTE-CIFC1SPSPSPPTI100
QUANTM i120, 2"NPT, Cast Iron Electric Diaphragm Pump, 200-240 V, AL Center, SP Seat, SP Ball, SP Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. Designed with a cast iron fluid section, this groundbreaking electric pump is built to efficiently handle many fluid transfer applications. With up to 8x more continuous torque at low speeds than conventional motors, this powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Revolutionary Design- Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
- Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
- Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
- Quiet operation reduces plant noise and improves employee safety and health
- Smart pump control provides more accurate flow set points and built-in I/O
- Powder-coated aluminum electric drive
- 240 VAC 3Ph motor with 15 ft cord and NEMA L15-20 plug
- Non-hazardous
- Cast iron fluid section with NPT end port
- Internal components include Santoprene seat, Santoprene ball, Santoprene diaphragm and PTFE manifold o-ring
$6,390.00
QUANTM PUMP, QTE-ALFC1PPPTPSPTA100
GG TE120-0012
GG TE120-0012
QUANTM PUMP, QTE-ALFC1PPPTPSPTA100
QUANTM i120, 2"NPT, Aluminum Electric Diaphragm Pump, 200-240 V, AL Center, PP Seat, PT Ball, PS Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The all-aluminum fluid section is specifically designed to be abrasion-resistant while also providing mild corrosion resistance. With up to 8x more continuous torque at low speeds than conventional motors, this general-purpose electric pump is an energy-saving workhorse that is ideal for sump evacuation applications as well as applications involving the evacuation of petroleum products (new and waste oils) and evacuation of solvents. This powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Not for use with halogenated hydrocarbons. Revolutionary Design- Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
- Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
- Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
- Quiet operation reduces plant noise and improves employee safety and health
- Smart pump control provides more accurate flow set points and built-in I/O
- Powder-coated aluminum electric drive
- 240 VAC 3Ph motor with 15 ft cord and NEMA L15-20 plug
- Non-hazardous
- Aluminum fluid section with NPT end port
- Internal components include polypropylene seat, PTFE ball, PTFE/Santoprene 2-piece diaphragm and PTFE manifold o-ring
$5,510.00
Quantm Pump, Qte-Alfc1Saacpspta100
GG TE120-0019
GG TE120-0019
Quantm Pump, Qte-Alfc1Saacpspta100 $5,570.00
Quantm Pump, Qte-Ssfc1Saptpspts200
GG TE120-0015
GG TE120-0015
Quantm Pump, Qte-Ssfc1Saptpspts200 $11,870.00
QUANTM PUMP, QTE-ALFC1SPPTSPPTA100
GG TE120-0022
GG TE120-0022
QUANTM PUMP, QTE-ALFC1SPPTSPPTA100
QUANTM i120, 2"NPT, Aluminum Electric Diaphragm Pump, 200-240 V, AL Center, SP Seat, PT Ball, SP Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The all-aluminum fluid section is specifically designed to be abrasion-resistant while also providing mild corrosion resistance. With up to 8x more continuous torque at low speeds than conventional motors, this general-purpose electric pump is an energy-saving workhorse that is ideal for sump evacuation applications as well as applications involving the evacuation of petroleum products (new and waste oils) and evacuation of solvents. This powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Not for use with halogenated hydrocarbons. Revolutionary Design- Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
- Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
- Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
- Quiet operation reduces plant noise and improves employee safety and health
- Smart pump control provides more accurate flow set points and built-in I/O
- Powder-coated aluminum electric drive
- 240 VAC 3Ph motor with 15 ft cord and NEMA L15-20 plug
- Non-hazardous
- Aluminum fluid section with NPT end port
- Internal components include Santoprene seat, PTFE ball, Santoprene diaphragm and PTFE manifold o-ring
$4,760.00
QUANTM PUMP, QTE-PPFC1SAPTPSPTP200
GG TE120-0035
GG TE120-0035
QUANTM PUMP, QTE-PPFC1SAPTPSPTP200
QUANTM i120, 2"Flange, Polypropylene Electric Diaphragm Pump, 200-240 V, AL Center, SS Seat, PT Ball, PS Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. Designed with a chemical-resistant polypropylene fluid section that provides high corrosion resistance, this groundbreaking electric pump is built to efficiently handle fluid transfer applications involving most chemicals and detergents, sump evacuation applications, as well as applications involving high and low pH materials. With up to 8x more continuous torque at low speeds than conventional motors, this powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Revolutionary Design- Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
- Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
- Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
- Quiet operation reduces plant noise and improves employee safety and health
- Smart pump control provides more accurate flow set points and built-in I/O
- Powder-coated aluminum electric drive
- 240 VAC 3Ph motor with 15 ft cord and NEMA L15-20 plug
- Non-hazardous
- Polypropylene fluid section with end flange
- Internal components include 316 stainless steel seat, PTFE ball, PTFE/Santoprene 2-piece diaphragm and PTFE manifold o-ring
$9,660.00
Quantm Pump, Qte-Ssfc1Spspsppts200
GG TE120-0025
GG TE120-0025
Quantm Pump, Qte-Ssfc1Spspsppts200 $10,570.00
Quantm Pump, Qte-Alfc1Tpactp--A200
GG TE120-0018
GG TE120-0018
Quantm Pump, Qte-Alfc1Tpactp--A200 $4,650.00
Quantm Pump, Qte-Alfc1Gegesppta100
GG TE120-0031
GG TE120-0031
Quantm Pump, Qte-Alfc1Gegesppta100 $4,710.00
Quantm Pump, Qte-Alfc1Fkfkfk-A100
GG TE120-0028
GG TE120-0028
Quantm Pump, Qte-Alfc1Fkfkfk-A100 $6,150.00
Quantm Pump, Qte-Cpfc1Ppptpsptc200
GG TE120-0030
GG TE120-0030
Quantm Pump, Qte-Cpfc1Ppptpsptc200 $10,930.00
Quantm Pump, Qte-Alfc1Ppbnb NPTa100
GG TE120-0039
GG TE120-0039
Quantm Pump, Qte-Alfc1Ppbnbnpta100 $4,870.00
QUANTM PUMP, QTE-PVFC1PVPTPSPTF200
GG TE120-0040
GG TE120-0040
QUANTM PUMP, QTE-PVFC1PVPTPSPTF200
QUANTM i120, 2"Flange, PVDF (Kynar) Electric Diaphragm Pump, 200-240 V, AL Center, PV Seat, PT Ball, PS Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. This groundbreaking electric pump is designed with a polyvinylidene fluoride (PVDF) fluid section that provides high corrosion and abrasion resistance to a variety of aggressive fluids and solvents. It efficiently handles fluid transfer applications involving highly concentrated chemicals or detergents, sump evacuation applications, as well as those involving high and low pH materials. With up to 8x more continuous torque at low speeds than conventional motors, this powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Revolutionary Design- Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
- Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
- Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
- Quiet operation reduces plant noise and improves employee safety and health
- Smart pump control provides more accurate flow set points and built-in I/O
- Powder-coated aluminum electric drive
- 240 VAC 3Ph motor with 15 ft cord and NEMA L15-20 plug
- Non-hazardous
- PVDF (Kynar) fluid section with end flange
- Internal components include PVDF (Kynar) seat, PTFE ball, PTFE/Santoprene 2-piece diaphragm and PTFE manifold o-ring
$18,060.00
Quantm Pump, Qte-Alfc1Sagegepta100
GG TE120-0029
GG TE120-0029
Quantm Pump, Qte-Alfc1Sagegepta100 $5,360.00
QUANTM PUMP, QTE-ALFC1SAPTPSPTA100
GG TE120-0038
GG TE120-0038
QUANTM PUMP, QTE-ALFC1SAPTPSPTA100
QUANTM i120, 2"NPT, Aluminum Electric Diaphragm Pump, 200-240 V, AL Center, SA Seat, PT Ball, PS Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The all-aluminum fluid section is specifically designed to be abrasion-resistant while also providing mild corrosion resistance. With up to 8x more continuous torque at low speeds than conventional motors, this general-purpose electric pump is an energy-saving workhorse that is ideal for sump evacuation applications as well as applications involving the evacuation of petroleum products (new and waste oils) and evacuation of solvents. This powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Not for use with halogenated hydrocarbons. Revolutionary Design- Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
- Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
- Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
- Quiet operation reduces plant noise and improves employee safety and health
- Smart pump control provides more accurate flow set points and built-in I/O
- Powder-coated aluminum electric drive
- 240 VAC 3Ph motor with 15 ft cord and NEMA L15-20 plug
- Non-hazardous
- Aluminum fluid section with NPT end port
- Internal components include PTFE seat, PTFE ball, PTFE/Santoprene 2-piece diaphragm and PTFE manifold o-ring
$6,110.00
Quantm Pump, Qte-Ppfc1Ppfkfkptp200
GG TE120-0034
GG TE120-0034
Quantm Pump, Qte-Ppfc1Ppfkfkptp200 $9,890.00
Quantm Pump, Qte-Alfc1Saspsppta200
GG TE120-0027
GG TE120-0027
Quantm Pump, Qte-Alfc1Saspsppta200 $4,970.00
Quantm Pump, Qte-Alfc1Sasdpspta200
GG TE120-0042
GG TE120-0042
Quantm Pump, Qte-Alfc1Sasdpspta200 $6,390.00
Quantm Pump, Qte-Ppfc1Ppgegeptp200
GG TE120-0041
GG TE120-0041
Quantm Pump, Qte-Ppfc1Ppgegeptp200 $8,500.00
Quantm Pump, Qte-Ppfc1Spptspptp200
GG TE120-0046
GG TE120-0046
Quantm Pump, Qte-Ppfc1Spptspptp200 $9,220.00
Quantm Pump, Qte-Alfc1Sabnb NPTa100
GG TE120-0043
GG TE120-0043
Quantm Pump, Qte-Alfc1Sabnbnpta100 $5,060.00
QUANTM PUMP, QTE-SSFC1SAPTPOPTS100
GG TE120-0047
GG TE120-0047
QUANTM PUMP, QTE-SSFC1SAPTPOPTS100
QUANTM i120, 2"NPT, Stainless Steel Electric Diaphragm Pump, 200-240 V, AL Center, SS Seat, PT Ball, PO Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The stainless-steel fluid section is designed to provide a high level of abrasion and corrosion resistance. With up to 8x more continuous torque at low speeds than conventional motors, this electric pump is an energy-saving workhorse that also delivers lower lifetime costs than less efficient pump technologies and is ideal for applications involving materials that are highly abrasive, paints, solvents or heated materials. This additional resilience means less downtime, which in turn provides a new opportunity to improve your bottom line. This powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Revolutionary Design- Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
- Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
- Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
- Quiet operation reduces plant noise and improves employee safety and health
- Smart pump control provides more accurate flow set points and built-in I/O
- Powder-coated aluminum electric drive
- 240 VAC 3Ph motor with 15 ft cord and NEMA L15-20 plug
- Non-hazardous
- 316 stainless steel fluid section with NPT end port
- Internal components include 316 stainless steel seat, PTFE ball, PTFE Overmold diaphragm and PTFE manifold o-ring
$12,700.00
Quantm Pump, Qte-Alfc1Safkfkpta100
GG TE120-0044
GG TE120-0044
Quantm Pump, Qte-Alfc1Safkfkpta100 $6,130.00
Quantm Pump, Qte-Ssfc1Saptpspts5100
GG TE120-0045
GG TE120-0045
Quantm Pump, Qte-Ssfc1Saptpspts5100 $12,440.00
QUANTM PUMP, QTE-PPFC1PPPTPOPTP200
GG TE120-0048
GG TE120-0048
QUANTM PUMP, QTE-PPFC1PPPTPOPTP200
QUANTM i120, 2"Flange, Polypropylene Electric Diaphragm Pump, 200-240 V, AL Center, PP Seat, PT Ball, PO Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. Designed with a chemical-resistant polypropylene fluid section that provides high corrosion resistance, this groundbreaking electric pump is built to efficiently handle fluid transfer applications involving most chemicals and detergents, sump evacuation applications, as well as applications involving high and low pH materials. With up to 8x more continuous torque at low speeds than conventional motors, this powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Revolutionary Design- Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
- Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
- Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
- Quiet operation reduces plant noise and improves employee safety and health
- Smart pump control provides more accurate flow set points and built-in I/O
- Powder-coated aluminum electric drive
- 240 VAC 3Ph motor with 15 ft cord and NEMA L15-20 plug
- Non-hazardous
- Polypropylene fluid section with end flange
- Internal components include polypropylene seat, PTFE ball, PTFE Overmold diaphragm and PTFE manifold o-ring
$10,570.00
Quantm Pump, Qte-Cifc1Bnbnbn-I100
GG TE120-0049
GG TE120-0049
Quantm Pump, Qte-Cifc1Bnbnbn-I100 $6,600.00
Quantm Pump, Qte-Ssfc1Fkfkfk-S100
GG TE120-0052
GG TE120-0052
Quantm Pump, Qte-Ssfc1Fkfkfk-S100 $12,260.00
QUANTM PUMP, QTE-SSFC1PPPTPSPTS100
GG TE120-0053
GG TE120-0053
QUANTM PUMP, QTE-SSFC1PPPTPSPTS100
QUANTM i120, 2"NPT, Stainless Steel Electric Diaphragm Pump, 200-240 V, AL Center, PP Seat, PT Ball, PS Diaphragm QUANTM isn’t just another electric pump: it’s a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It’s time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump. The stainless-steel fluid section is designed to provide a high level of abrasion and corrosion resistance. With up to 8x more continuous torque at low speeds than conventional motors, this electric pump is an energy-saving workhorse that also delivers lower lifetime costs than less efficient pump technologies and is ideal for applications involving materials that are highly abrasive, paints, solvents or heated materials. This additional resilience means less downtime, which in turn provides a new opportunity to improve your bottom line. This powerful new pump delivers a higher level of reliability to minimize downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework. Revolutionary Design- Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
- Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
- Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
- Quiet operation reduces plant noise and improves employee safety and health
- Smart pump control provides more accurate flow set points and built-in I/O
- Powder-coated aluminum electric drive
- 240 VAC 3Ph motor with 15 ft cord and NEMA L15-20 plug
- Non-hazardous
- 316 stainless steel fluid section with NPT end port
- Internal components include polypropylene seat, PTFE ball, PTFE/Santoprene 2-piece diaphragm and PTFE manifold o-ring
$11,810.00
Quantm Pump, Qte-Cifc1Saptpspti100
GG TE120-0050
GG TE120-0050
Quantm Pump, Qte-Cifc1Saptpspti100 $6,920.00
Quantm Pump, Qte-Ssfc1Gegegepts100
GG TE120-0051
GG TE120-0051
Quantm Pump, Qte-Ssfc1Gegegepts100 $10,000.00
Quantm Pump, Qte-Ssfc1Sabnb NPTs200
GG TE120-0062
GG TE120-0062
Quantm Pump, Qte-Ssfc1Sabnbnpts200 $12,000.00
Saniforce Aodd Pump, 2150Hs.Ps01Assassspspep31
GG SP2B.0017
GG SP2B.0017
SANIFORCE AODD PUMP, 2150HS.PS01ASSASSSPSPEP31
Graco SP2B.0017 SaniForce 2150, 2" HS SST Pneumatic Diaphragm Pump, SS Center, SS Seats, SP Balls, SP Diaphragms
Graco's SaniForce 2150, 2-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 180 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 2 inch sanitary pump with flow rates up to 180 gpm (681 lpm) and pressures up to 120 psi (8 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
- Optional leak sensors notify users when processes may be compromised
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Pass solids up to 0.5 in. (12.7 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 2150 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: Santoprene
- Center Section Material: Stainless Steel
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: Tri-Clamp
- Diaphragm Material: Santoprene
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food, Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Center Port
- Manifold O-Ring Material: EPDM
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 3.1 (Serialized)
- Maximum Air Consumption (SCFM): 200
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 135
- Maximum Flow Rate (GPM): 180
- Maximum Flow Rate (L/min): 681
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Solid Size (cm): 1.27
- Maximum Solid Size (in): 0.5
- Maximum S
$16,010.00
SANIFORCE AODD PUMP, 2150HS.PS01ASSASSPTPOEP21
GG SP2B.0010
GG SP2B.0010
SANIFORCE AODD PUMP, 2150HS.PS01ASSASSPTPOEP21
SaniForce 2150, 2" HS SST Pneumatic Diaphragm Pump, SS Center, SS Seats, PT Balls, PO Diaphragms Graco's SaniForce 2150, 2-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 180 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 2 inch sanitary pump with flow rates up to 180 gpm (681 lpm) and pressures up to 120 psi (8 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process PTFE/EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side Optional leak sensors notify users when processes may be compromised 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Pass solids up to 0.5 in. (12.7 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design $14,980.00
SANIFORCE AODD PUMP, 2150PH.PS03ASSASSPTPOEP21
GG SP2B.0118
GG SP2B.0118
SANIFORCE AODD PUMP, 2150PH.PS03ASSASSPTPOEP21
SaniForce 2150, 2" PH SST Pneumatic Diaphragm Pump, SS Center, SS Seats, PT Balls, PO Diaphragms Graco's SaniForce 2150, 2-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 180 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 2 inch sanitary pump with flow rates up to 180 gpm (681 lpm) and pressures up to 120 psi (8 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process PTFE/EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side Equipped with leak sensor to notify users when processes may be compromised 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Pass solids up to 0.5 in. (12.7 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design $18,180.00
SANIFORCE AODD PUMP, 2150HS.PS01ASSASSSPSPEP21
GG SP2B.0016
GG SP2B.0016
SANIFORCE AODD PUMP, 2150HS.PS01ASSASSSPSPEP21
SaniForce 2150, 2" HS SST Pneumatic Diaphragm Pump, SS Center, SS Seats, SP Balls, SP Diaphragms Graco's SaniForce 2150, 2-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 180 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 2 inch sanitary pump with flow rates up to 180 gpm (681 lpm) and pressures up to 120 psi (8 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process Optional leak sensors notify users when processes may be compromised 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Pass solids up to 0.5 in. (12.7 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design $14,390.00
SANIFORCE AODD PUMP, 2150PH.PSP3ASSASSPTPSEP21
GG SP2B.0120
GG SP2B.0120
SANIFORCE AODD PUMP, 2150PH.PSP3ASSASSPTPSEP21
SaniForce 2150, 2" PH SST Pneumatic Diaphragm Pump, SS Center, SS Seats, PT Balls, PS Diaphragms Graco's SaniForce 2150, 2-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 180 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 2 inch sanitary pump with flow rates up to 180 gpm (681 lpm) and pressures up to 120 psi (8 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process Equipped with leak sensor to notify users when processes may be compromised 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Pass solids up to 0.5 in. (12.7 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design $17,850.00
SANIFORCE AODD PUMP, 21503A.PS02ASSASSPTEOEP21
GG SP2B.0078
GG SP2B.0078
SANIFORCE AODD PUMP, 21503A.PS02ASSASSPTEOEP21
SaniForce 2150, 2" 3A SST Pneumatic Diaphragm Pump, SS Center, SS Seats, PT Balls, EO Diaphragms Graco's SaniForce 2150, 2-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 180 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 2 inch sanitary pump with flow rates up to 180 gpm (681 lpm) and pressures up to 120 psi (8 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side Equipped with leak sensor to notify users when processes may be compromised 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Pass solids up to 0.5 in. (12.7 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design $16,210.00
Saniforce Aodd Pump, 2150Hs.Ps01Assassepeoep31
GG SP2B.0165
GG SP2B.0165
SANIFORCE AODD PUMP, 2150HS.PS01ASSASSEPEOEP31
Graco SP2B.0165 SaniForce 2150, 2" HS SST Pneumatic Diaphragm Pump, SS Center, SS Seats, EP Balls, EO Diaphragms
Graco's SaniForce 2150, 2-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 180 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 2 inch sanitary pump with flow rates up to 180 gpm (681 lpm) and pressures up to 120 psi (8 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
- EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side
- Optional leak sensors notify users when processes may be compromised
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Pass solids up to 0.5 in. (12.7 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 2150 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: EPDM
- Center Section Material: Stainless Steel
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: Tri-Clamp
- Diaphragm Material: EPDM Overmold
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food and Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Center Port
- Manifold O-Ring Material: EPDM
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 3.1 (Serialized)
- Maximum Air Consumption (SCFM): 200
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 135
- Maximum Flow Rate (GPM): 180
- Maximum Flow Rate (L/min): 681
- Maximum Fluid Operating Temperature (°C): 121
- Maximum Fluid Operating Temperature (°F): 250
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Fluid Operating Temperature (°C): 121
- Maximum Fluid Operating Temperature (°F): 250
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
$17,490.00
Saniforce Aodd Pump, 2150Ph.Ps03Assassepeoep31
GG SP2B.0173
GG SP2B.0173
SANIFORCE AODD PUMP, 2150PH.PS03ASSASSEPEOEP31
Graco SP2B.0173 SaniForce 2150, 2" PH SST Pneumatic Diaphragm Pump, SS Center, SS Seats, EP Balls, EO Diaphragms
Graco's SaniForce 2150, 2-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 180 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 2 inch sanitary pump with flow rates up to 180 gpm (681 lpm) and pressures up to 120 psi (8 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
- EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side
- Equipped with leak sensor to notify users when processes may be compromised
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Pass solids up to 0.5 in. (12.7 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 2150 PH
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: EPDM
- Center Section Material: Stainless Steel
- Compatible Material: Food, Personal Care, Pharmaceutical
- Compressor Required: Yes
- Connection Type: Tri-Clamp
- Diaphragm Material: EPDM Overmold
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food, Personal Care, Pharmaceutical
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Center Port
- Manifold O-Ring Material: EPDM
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 3.1 (Serialized)
- Maximum Air Consumption (SCFM): 200
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 135
- Maximum Flow Rate (GPM): 180
- Maximum Flow Rate (L/min): 681
- Maximum Fluid Operating Temperature (°C): 121
- Maximum Fluid Operating Temperature (°F): 250
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Fluid Operating Temperature (°C): 121
- Maximum Fluid Operating Temperature (°F): 250
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid
$20,390.00
Saniforce Aodd Pump, 2150Ph.Ps03Assassepeoep21
GG SP2B.0172
GG SP2B.0172
SANIFORCE AODD PUMP, 2150PH.PS03ASSASSEPEOEP21
Graco SP2B.0172 SaniForce 2150, 2" PH SST Pneumatic Diaphragm Pump, SS Center, SS Seats, EP Balls, EO Diaphragms
Graco's SaniForce 2150, 2-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 180 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 2 inch sanitary pump with flow rates up to 180 gpm (681 lpm) and pressures up to 120 psi (8 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
- EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side
- Equipped with leak sensor to notify users when processes may be compromised
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Pass solids up to 0.5 in. (12.7 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 2150 PH
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: EPDM
- Center Section Material: Stainless Steel
- Compatible Material: Food, Personal Care, Pharmaceutical
- Compressor Required: Yes
- Connection Type: Tri-Clamp
- Diaphragm Material: EPDM Overmold
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food, Personal Care, Pharmaceutical
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Center Port
- Manifold O-Ring Material: EPDM
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 2.1 (Standard)
- Maximum Air Consumption (SCFM): 200
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 135
- Maximum Flow Rate (GPM): 180
- Maximum Flow Rate (L/min): 681
- Maximum Fluid Operating Temperature (°C): 121
- Maximum Fluid Operating Temperature (°F): 250
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Fluid Operating Temperature (°C): 121
- Maximum Fluid Operating Temperature (°F): 250
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid P
$19,320.00
SANIFORCE AODD PUMP, 3250HS.PP01ASSASSFKFKFK21
GG SP3B.0008
GG SP3B.0008
SANIFORCE AODD PUMP, 3250HS.PP01ASSASSFKFKFK21
SaniForce 3250, 3" HS SST Pneumatic Diaphragm Pump, Poly Center, SS Seats, FK Balls, FK Diaphragms Graco's SaniForce 3250, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 230 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 3 inch sanitary pump with flow rates up to 230 gpm (870 lpm) and pressures up to 100 psi (6.9 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process Optional leak sensors notify users when processes may be compromised 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Pass solids up to 0.75 in. (19 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design $19,860.00
SANIFORCE AODD PUMP, 3250HS.PP01ASSASSPTEOEP21
GG SP3B.0006
GG SP3B.0006
SANIFORCE AODD PUMP, 3250HS.PP01ASSASSPTEOEP21
SaniForce 3250, 3" HS SST Pneumatic Diaphragm Pump, Poly Center, SS Seats, PT Balls, EO Diaphragms Graco's SaniForce 3250, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 230 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 3 inch sanitary pump with flow rates up to 230 gpm (870 lpm) and pressures up to 100 psi (6.9 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side Optional leak sensors notify users when processes may be compromised 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Pass solids up to 0.75 in. (19 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design $20,030.00
Saniforce Aodd Pump, 3250Hs.Pp01Assassfkfkfk31
GG SP3B.0009
GG SP3B.0009
SANIFORCE AODD PUMP, 3250HS.PP01ASSASSFKFKFK31
Graco SP3B.0009 SaniForce 3250, 3" HS SST Pneumatic Diaphragm Pump, Poly Center, SS Seats, FK Balls, FK Diaphragms
Graco's SaniForce 3250, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 230 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 3 inch sanitary pump with flow rates up to 230 gpm (870 lpm) and pressures up to 100 psi (6.9 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
- Optional leak sensors notify users when processes may be compromised
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Pass solids up to 0.75 in. (19 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 3250 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 3/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: FKM (Viton)
- Center Section Material: Polypropylene
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: Tri-Clamp
- Diaphragm Material: FKM (Viton)
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food, Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Center Port
- Manifold O-Ring Material: FKM (Viton)
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 3.1 (Serialized)
- Maximum Air Consumption (SCFM): 290
- Maximum Air Pressure (bar): 6.9
- Maximum Air Pressure (kPa): 690
- Maximum Air Pressure (MPa): 0.69
- Maximum Air Pressure (psi): 100
- Maximum Cycle Rate (CPM): 190
- Maximum Flow Rate (GPM): 230
- Maximum Flow Rate (L/min): 870
- Maximum Fluid Operating Temperature (°C): 135
- Maximum Fluid Operating Temperature (°F): 275
- Maximum Fluid Pressure (bar): 6.9
- Maximum Fluid Pressure (kPa): 690
- Maximum Fluid Pressure (MPa): 0.69
- Maximum Fluid Pressure (psi): 100
- Maximum Fluid Operating Temperature (°C): 135
- Maximum Fluid Operating Temperature (°F): 275
- Maximum Fluid Pressure (bar): 6.9
- Maximum Fluid Pressure (kPa): 690
- Maximum Fluid Pressure (MPa): 0.69
- Maximum Fluid Pressure (psi): 100
- Maximum Solid Size (cm): 1.9
- Maximum Solid Size (in): 0.75
$21,700.00
Saniforce Aodd Pump, 2150Hs.Ps01Assassbnbnbn21
GG SP2B.0144
GG SP2B.0144
SANIFORCE AODD PUMP, 2150HS.PS01ASSASSBNBNBN21
Graco SP2B.0144 SaniForce 2150, 2" HS SST Pneumatic Diaphragm Pump, SS Center, BN Seats, BN Balls, BN Diaphragms
Graco's SaniForce 2150, 2-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 180 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 2 inch sanitary pump with flow rates up to 180 gpm (681 lpm) and pressures up to 120 psi (8 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
- Optional leak sensors notify users when processes may be compromised
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Pass solids up to 0.5 in. (12.7 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 2150 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: Buna
- Center Section Material: Stainless Steel
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: Tri-Clamp
- Diaphragm Material: Buna
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food and Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Center Port
- Manifold O-Ring Material: Buna
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 2.1 (Standard)
- Maximum Air Consumption (SCFM): 200
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 135
- Maximum Flow Rate (GPM): 180
- Maximum Flow Rate (L/min): 681
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Solid Size (cm): 1.27
- Maximum Solid Size (in): 0.5
- Maximum Solid Size (
$15,780.00
SANIFORCE AODD PUMP, 2150HS.PS01ASSASSEPEOEP21
GG SP2B.0164
GG SP2B.0164
SANIFORCE AODD PUMP, 2150HS.PS01ASSASSEPEOEP21
SaniForce 2150, 2" HS SST Pneumatic Diaphragm Pump, SS Center, SS Seats, EP Balls, EO Diaphragms Graco's SaniForce 2150, 2-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 180 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 2 inch sanitary pump with flow rates up to 180 gpm (681 lpm) and pressures up to 120 psi (8 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side Optional leak sensors notify users when processes may be compromised 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Pass solids up to 0.5 in. (12.7 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design $16,450.00
SANIFORCE AODD PUMP, 3250HS.PP01ASSASSSPSPEP21
GG SP3B.0016
GG SP3B.0016
SANIFORCE AODD PUMP, 3250HS.PP01ASSASSSPSPEP21
SaniForce 3250, 3" HS SST Pneumatic Diaphragm Pump, Poly Center, SS Seats, SP Balls, SP Diaphragms Graco's SaniForce 3250, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 230 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 3 inch sanitary pump with flow rates up to 230 gpm (870 lpm) and pressures up to 100 psi (6.9 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process Optional leak sensors notify users when processes may be compromised 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Pass solids up to 0.75 in. (19 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design $18,050.00
SANIFORCE AODD PUMP, 3250HS.PPP1ASSASSPTPSEP21
GG SP3B.0012
GG SP3B.0012
SANIFORCE AODD PUMP, 3250HS.PPP1ASSASSPTPSEP21
SaniForce 3250, 3" HS SST Pneumatic Diaphragm Pump, Poly Center, SS Seats, PT Balls, PS Diaphragms Graco's SaniForce 3250, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 230 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 3 inch sanitary pump with flow rates up to 230 gpm (870 lpm) and pressures up to 100 psi (6.9 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process Optional leak sensors notify users when processes may be compromised 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Pass solids up to 0.75 in. (19 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design $19,410.00
Saniforce Aodd Pump, 3250Hs.Pp01Assassepeoep31
GG SP3B.0103
GG SP3B.0103
SANIFORCE AODD PUMP, 3250HS.PP01ASSASSEPEOEP31
Graco SP3B.0103 SaniForce 3250, 3" HS SST Pneumatic Diaphragm Pump, Poly Center, SS Seats, EP Balls, EO Diaphragms
Graco's SaniForce 3250, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 230 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 3 inch sanitary pump with flow rates up to 230 gpm (870 lpm) and pressures up to 100 psi (6.9 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
- EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side
- Optional leak sensors notify users when processes may be compromised
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Pass solids up to 0.75 in. (19 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 3250 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 3/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: EPDM
- Center Section Material: Polypropylene
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: Tri-Clamp
- Diaphragm Material: EPDM Overmold
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food and Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Center Port
- Manifold O-Ring Material: EPDM
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 3.1 (Serialized)
- Maximum Air Consumption (SCFM): 290
- Maximum Air Pressure (bar): 6.9
- Maximum Air Pressure (kPa): 690
- Maximum Air Pressure (MPa): 0.69
- Maximum Air Pressure (psi): 100
- Maximum Cycle Rate (CPM): 190
- Maximum Flow Rate (GPM): 230
- Maximum Flow Rate (L/min): 870
- Maximum Fluid Operating Temperature (°C): 121
- Maximum Fluid Operating Temperature (°F): 250
- Maximum Fluid Pressure (bar): 6.9
- Maximum Fluid Pressure (kPa): 690
- Maximum Fluid Pressure (MPa): 0.69
- Maximum Fluid Pressure (psi): 100
- Maximum Fluid Operating Temperature (°C): 121
- Maximum Fluid Operating Temperature (°F): 250
- Maximum Fluid Pressure (bar): 6.9
- Maximum Fluid Pressure (kPa): 690
- Maximum Fluid Pressure (MPa)
$21,250.00
SANIFORCE AODD PUMP, 3250HS.PPP1ASSASSPTPSEP31
GG SP3B.0013
GG SP3B.0013
SANIFORCE AODD PUMP, 3250HS.PPP1ASSASSPTPSEP31
SaniForce 3250, 3" HS SST Pneumatic Diaphragm Pump, Poly Center, SS Seats, PT Balls, PS Diaphragms Graco's SaniForce 3250, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 230 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 3 inch sanitary pump with flow rates up to 230 gpm (870 lpm) and pressures up to 100 psi (6.9 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process Optional leak sensors notify users when processes may be compromised 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Pass solids up to 0.75 in. (19 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design $20,500.00
Saniforce Aodd Pump, 32503A.Pp02Assassepeoep31
GG SP3B.0095
GG SP3B.0095
SANIFORCE AODD PUMP, 32503A.PP02ASSASSEPEOEP31
Graco SP3B.0095 SaniForce 3250, 3" 3A SST Pneumatic Diaphragm Pump, Poly Center, SS Seats, EP Balls, EO Diaphragms
Graco's SaniForce 3250, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 230 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 3 inch sanitary pump with flow rates up to 230 gpm (870 lpm) and pressures up to 100 psi (6.9 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
- EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side
- Equipped with leak sensor to notify users when processes may be compromised
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Pass solids up to 0.75 in. (19 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 3250 3A
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 3/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: EPDM
- Center Section Material: Polypropylene
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: Tri-Clamp
- Diaphragm Material: EPDM Overmold
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food and Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Center Port
- Manifold O-Ring Material: EPDM
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 3.1 (Serialized)
- Maximum Air Consumption (SCFM): 290
- Maximum Air Pressure (bar): 6.9
- Maximum Air Pressure (kPa): 690
- Maximum Air Pressure (MPa): 0.69
- Maximum Air Pressure (psi): 100
- Maximum Cycle Rate (CPM): 190
- Maximum Flow Rate (GPM): 230
- Maximum Flow Rate (L/min): 870
- Maximum Fluid Operating Temperature (°C): 121
- Maximum Fluid Operating Temperature (°F): 250
- Maximum Fluid Pressure (bar): 6.9
- Maximum Fluid Pressure (kPa): 690
- Maximum Fluid Pressure (MPa): 0.69
- Maximum Fluid Pressure (psi): 100
- Maximum Fluid Operating Temperature (°C): 121
- Maximum Fluid Operating Temperature (°F): 250
- Maximum Fluid Pressure (bar): 6.9
- Maximum Fluid Pressure (kPa): 690
- Maximum Fluid Pressur
$23,580.00
SANIFORCE AODD PUMP, 3250HS.PP01ASSASSEPEOEP21
GG SP3B.0102
GG SP3B.0102
SANIFORCE AODD PUMP, 3250HS.PP01ASSASSEPEOEP21
SaniForce 3250, 3" HS SST Pneumatic Diaphragm Pump, Poly Center, SS Seats, EP Balls, EO Diaphragms Graco's SaniForce 3250, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 230 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 3 inch sanitary pump with flow rates up to 230 gpm (870 lpm) and pressures up to 100 psi (6.9 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side Optional leak sensors notify users when processes may be compromised 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Pass solids up to 0.75 in. (19 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design $20,210.00
Saniforce Aodd Pump, 32503A.Pp02Assassepeoep21
GG SP3B.0094
GG SP3B.0094
SANIFORCE AODD PUMP, 32503A.PP02ASSASSEPEOEP21
Graco SP3B.0094 SaniForce 3250, 3" 3A SST Pneumatic Diaphragm Pump, Poly Center, SS Seats, EP Balls, EO Diaphragms
Graco's SaniForce 3250, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 230 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 3 inch sanitary pump with flow rates up to 230 gpm (870 lpm) and pressures up to 100 psi (6.9 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
- EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side
- Equipped with leak sensor to notify users when processes may be compromised
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Pass solids up to 0.75 in. (19 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 3250 3A
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 3/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: EPDM
- Center Section Material: Polypropylene
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: Tri-Clamp
- Diaphragm Material: EPDM Overmold
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food and Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Center Port
- Manifold O-Ring Material: EPDM
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 2.1 (Standard)
- Maximum Air Consumption (SCFM): 290
- Maximum Air Pressure (bar): 6.9
- Maximum Air Pressure (kPa): 690
- Maximum Air Pressure (MPa): 0.69
- Maximum Air Pressure (psi): 100
- Maximum Cycle Rate (CPM): 190
- Maximum Flow Rate (GPM): 230
- Maximum Flow Rate (L/min): 870
- Maximum Fluid Operating Temperature (°C): 121
- Maximum Fluid Operating Temperature (°F): 250
- Maximum Fluid Pressure (bar): 6.9
- Maximum Fluid Pressure (kPa): 690
- Maximum Fluid Pressure (MPa): 0.69
- Maximum Fluid Pressure (psi): 100
- Maximum Fluid Operating Temperature (°C): 121
- Maximum Fluid Operating Temperature (°F): 250
- Maximum Fluid Pressure (bar): 6.9
- Maximum Fluid Pressure (kPa): 690
- Maximum Fluid Pressure
$20,640.00
SANIFORCE AODD PUMP, 32503A.PP02ASSASSPTEOEP21
GG SP3B.0036
GG SP3B.0036
SANIFORCE AODD PUMP, 32503A.PP02ASSASSPTEOEP21
SaniForce 3250, 3" 3A SST Pneumatic Diaphragm Pump, Poly Center, SS Seats, PT Balls, EO Diaphragms Graco's SaniForce 3250, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 230 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 3 inch sanitary pump with flow rates up to 230 gpm (870 lpm) and pressures up to 100 psi (6.9 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side Equipped with leak sensor to notify users when processes may be compromised 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Pass solids up to 0.75 in. (19 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design $22,010.00
Saniforce Aodd Pump, 3250Ph.Pp03Assassepeoep21
GG SP3B.0106
GG SP3B.0106
SANIFORCE AODD PUMP, 3250PH.PP03ASSASSEPEOEP21
Graco SP3B.0106 SaniForce 3250, 3" PH SST Pneumatic Diaphragm Pump, Poly Center, SS Seats, EP Balls, EO Diaphragms
Graco's SaniForce 3250, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 230 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 3 inch sanitary pump with flow rates up to 230 gpm (870 lpm) and pressures up to 100 psi (6.9 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
- EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side
- Equipped with leak sensor to notify users when processes may be compromised
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Pass solids up to 0.75 in. (19 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 3150 PH
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 3/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: EPDM
- Center Section Material: Polypropylene
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: Tri-Clamp
- Diaphragm Material: EPDM Overmold
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food and Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Center Port
- Manifold O-Ring Material: EPDM
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 2.1 (Standard)
- Maximum Air Consumption (SCFM): 290
- Maximum Air Pressure (bar): 6.9
- Maximum Air Pressure (kPa): 690
- Maximum Air Pressure (MPa): 0.69
- Maximum Air Pressure (psi): 100
- Maximum Cycle Rate (CPM): 190
- Maximum Flow Rate (GPM): 230
- Maximum Flow Rate (L/min): 870
- Maximum Fluid Operating Temperature (°C): 121
- Maximum Fluid Operating Temperature (°F): 250
- Maximum Fluid Pressure (bar): 6.9
- Maximum Fluid Pressure (kPa): 690
- Maximum Fluid Pressure (MPa): 0.69
- Maximum Fluid Pressure (psi): 100
- Maximum Fluid Operating Temperature (°C): 121
- Maximum Fluid Operating Temperature (°F): 250
- Maximum Fluid Pressure (bar): 6.9
- Maximum Fluid Pressure (kPa): 690
- Maximum Fluid Pressure
$22,970.00
Saniforce Aodd Pump, 3250Hs.Pp01Assassspspep31
GG SP3B.0017
GG SP3B.0017
SANIFORCE AODD PUMP, 3250HS.PP01ASSASSSPSPEP31
Graco SP3B.0017 SaniForce 3250, 3" HS SST Pneumatic Diaphragm Pump, Poly Center, SS Seats, SP Balls, SP Diaphragms
Graco's SaniForce 3250, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 230 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 3 inch sanitary pump with flow rates up to 230 gpm (870 lpm) and pressures up to 100 psi (6.9 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
- Optional leak sensors notify users when processes may be compromised
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Pass solids up to 0.75 in. (19 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 3250 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 3/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: Santoprene
- Center Section Material: Polypropylene
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: Tri-Clamp
- Diaphragm Material: Santoprene
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food, Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Center Port
- Manifold O-Ring Material: EPDM
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 3.1 (Serialized)
- Maximum Air Consumption (SCFM): 290
- Maximum Air Pressure (bar): 6.9
- Maximum Air Pressure (kPa): 690
- Maximum Air Pressure (MPa): 0.69
- Maximum Air Pressure (psi): 100
- Maximum Cycle Rate (CPM): 190
- Maximum Flow Rate (GPM): 230
- Maximum Flow Rate (L/min): 870
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 6.9
- Maximum Fluid Pressure (kPa): 690
- Maximum Fluid Pressure (MPa): 0.69
- Maximum Fluid Pressure (psi): 100
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 6.9
- Maximum Fluid Pressure (kPa): 690
- Maximum Fluid Pressure (MPa): 0.69
- Maximum Fluid Pressure (psi): 100
- Maximum Solid Size (cm): 1.9
- Maximum Solid Size (in): 0.75
$19,800.00
Saniforce Aodd Pump, 3250Hs.Pp01Assassbnbnbn21
GG SP3B.0086
GG SP3B.0086
SANIFORCE AODD PUMP, 3250HS.PP01ASSASSBNBNBN21
Graco SP3B.0086 SaniForce 3250, 2" HS SST Pneumatic Diaphragm Pump, PP Center, BN Seats, BN Balls, BN Diaphragms
Graco's SaniForce 3250, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 230 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 3 inch sanitary pump with flow rates up to 230 gpm (870 lpm) and pressures up to 100 psi (6.9 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
- Optional leak sensors notify users when processes may be compromised
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Pass solids up to 0.75 in. (19 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 3250 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 3/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: Buna
- Center Section Material: Polypropylene
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: Tri-Clamp
- Diaphragm Material: Buna
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food and Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Center Port
- Manifold O-Ring Material: Buna
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 2.1 (Standard)
- Maximum Air Consumption (SCFM): 290
- Maximum Air Pressure (bar): 6.9
- Maximum Air Pressure (kPa): 690
- Maximum Air Pressure (MPa): 0.69
- Maximum Air Pressure (psi): 100
- Maximum Cycle Rate (CPM): 190
- Maximum Flow Rate (GPM): 230
- Maximum Flow Rate (L/min): 870
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 6.9
- Maximum Fluid Pressure (kPa): 690
- Maximum Fluid Pressure (MPa): 0.69
- Maximum Fluid Pressure (psi): 100
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 6.9
- Maximum Fluid Pressure (kPa): 690
- Maximum Fluid Pressure (MPa): 0.69
- Maximum Fluid Pressure (psi): 100
- Maximum Solid Size (cm): 1.9
- Maximum Solid Size (in): 0.75
- Maximum Soli
$19,560.00
SANIFORCE AODD PUMP, 3150HS.PS01ASSAFL-EOEP21
GG SP3F.0000
GG SP3F.0000
SANIFORCE AODD PUMP, 3150HS.PS01ASSAFL-EOEP21
SaniForce 3150, 3" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, EO Diaphragms Graco's SaniForce 3150, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 130 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 3 inch sanitary pump with flow rates up to 130 gpm (492 lpm) and pressures up to 120 psi (8 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Flapper check enables passage of solids up to 2.46 in. (62.5 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design $15,720.00
SANIFORCE AODD PUMP, 3150HS.PSP1ASSAFL-PSEP21
GG SP3F.0006
GG SP3F.0006
SANIFORCE AODD PUMP, 3150HS.PSP1ASSAFL-PSEP21
SaniForce 3150, 3" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, PS Diaphragms Graco's SaniForce 3150, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 130 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 3 inch sanitary pump with flow rates up to 130 gpm (492 lpm) and pressures up to 120 psi (8 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Flapper check enables passage of solids up to 2.46 in. (62.5 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design $16,190.00
Saniforce Aodd Pump, 3250Hs.Pp01Assassptpoep21
GG SP3B.0126
GG SP3B.0126
SANIFORCE AODD PUMP, 3250HS.PP01ASSASSPTPOEP21
Graco SP3B.0126 SaniForce 3250, 3" HS SST Pneumatic Diaphragm Pump, Poly Center, SS Seats, PT Balls, PO Diaphragms
Graco's SaniForce 3250, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 230 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 3 inch sanitary pump with flow rates up to 230 gpm (870 lpm) and pressures up to 100 psi (6.9 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
- PTFE/EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side
- Optional leak sensors notify users when processes may be compromised
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Pass solids up to 0.75 in. (19 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 3250 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 3/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: PTFE
- Center Section Material: Polypropylene
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: Tri-Clamp
- Diaphragm Material: PTFE/EPDM Overmold
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food and Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Center Port
- Manifold O-Ring Material: EPDM
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 2.1 (Standard)
- Maximum Air Consumption (SCFM): 290
- Maximum Air Pressure (bar): 6.9
- Maximum Air Pressure (kPa): 690
- Maximum Air Pressure (MPa): 0.69
- Maximum Air Pressure (psi): 100
- Maximum Cycle Rate (CPM): 190
- Maximum Flow Rate (GPM): 230
- Maximum Flow Rate (L/min): 870
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 6.9
- Maximum Fluid Pressure (kPa): 690
- Maximum Fluid Pressure (MPa): 0.69
- Maximum Fluid Pressure (psi): 100
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 6.9
- Maximum Fluid Pressure (kPa): 690
- Maximum Fluid Pressure
$20,660.00
SANIFORCE AODD PUMP, 3150HS.PS01ASSAFL-SPEP21
GG SP3F.0008
GG SP3F.0008
SANIFORCE AODD PUMP, 3150HS.PS01ASSAFL-SPEP21
SaniForce 3150, 3" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, SP Diaphragms Graco's SaniForce 3150, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 130 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 3 inch sanitary pump with flow rates up to 130 gpm (492 lpm) and pressures up to 120 psi (8 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Flapper check enables passage of solids up to 2.46 in. (62.5 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design $16,030.00
SANIFORCE AODD PUMP, 3150HS.PS01ASSEFL-EOEP21
GG SP3F.0048
GG SP3F.0048
SANIFORCE AODD PUMP, 3150HS.PS01ASSEFL-EOEP21
SaniForce 3150, 3" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, EO Diaphragms Graco's SaniForce 3150, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 130 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 3 inch sanitary pump with flow rates up to 130 gpm (492 lpm) and pressures up to 120 psi (8 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Flapper check enables passage of solids up to 2.46 in. (62.5 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design $20,110.00
SANIFORCE AODD PUMP, 3150HS.PS01ASSAFL-POEP21
GG SP3F.0004
GG SP3F.0004
SANIFORCE AODD PUMP, 3150HS.PS01ASSAFL-POEP21
SaniForce 3150, 3" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, PO Diaphragms Graco's SaniForce 3150, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 130 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 3 inch sanitary pump with flow rates up to 130 gpm (492 lpm) and pressures up to 120 psi (8 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process PTFE/EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Flapper check enables passage of solids up to 2.46 in. (62.5 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design $16,540.00
Saniforce Aodd Pump, 3250Ph.Pp03Assassepeoep31
GG SP3B.0107
GG SP3B.0107
SANIFORCE AODD PUMP, 3250PH.PP03ASSASSEPEOEP31
Graco SP3B.0107 SaniForce 3250, 3" PH SST Pneumatic Diaphragm Pump, Poly Center, SS Seats, EP Balls, EO Diaphragms
Graco's SaniForce 3250, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 230 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 3 inch sanitary pump with flow rates up to 230 gpm (870 lpm) and pressures up to 100 psi (6.9 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
- EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side
- Equipped with leak sensor to notify users when processes may be compromised
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Pass solids up to 0.75 in. (19 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 3150 PH
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 3/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: EPDM
- Center Section Material: Polypropylene
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: Tri-Clamp
- Diaphragm Material: EPDM Overmold
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food and Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Center Port
- Manifold O-Ring Material: EPDM
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 3.1 (Serialized)
- Maximum Air Consumption (SCFM): 290
- Maximum Air Pressure (bar): 6.9
- Maximum Air Pressure (kPa): 690
- Maximum Air Pressure (MPa): 0.69
- Maximum Air Pressure (psi): 100
- Maximum Cycle Rate (CPM): 190
- Maximum Flow Rate (GPM): 230
- Maximum Flow Rate (L/min): 870
- Maximum Fluid Operating Temperature (°C): 121
- Maximum Fluid Operating Temperature (°F): 250
- Maximum Fluid Pressure (bar): 6.9
- Maximum Fluid Pressure (kPa): 690
- Maximum Fluid Pressure (MPa): 0.69
- Maximum Fluid Pressure (psi): 100
- Maximum Fluid Operating Temperature (°C): 121
- Maximum Fluid Operating Temperature (°F): 250
- Maximum Fluid Pressure (bar): 6.9
- Maximum Fluid Pressure (kPa): 690
- Maximum Fluid Pressur
$24,030.00
Saniforce Aodd Pump, 3150Hs.Ps01Assefl-Poep21
GG SP3F.0052
GG SP3F.0052
SANIFORCE AODD PUMP, 3150HS.PS01ASSEFL-POEP21
Graco SP3F.0052 SaniForce 3150, 3" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, PO Diaphragms
Graco's SaniForce 3150, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 130 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 3 inch sanitary pump with flow rates up to 130 gpm (492 lpm) and pressures up to 120 psi (8 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
- PTFE/EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Flapper check enables passage of solids up to 2.46 in. (62.5 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 3150 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: 316 Stainless Steel Flapper
- Center Section Material: Stainless Steel
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: Tri-Clamp
- Diaphragm Material: PTFE/EPDM Overmold
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food, Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Center Port Wye
- Manifold O-Ring Material: EPDM
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 2.1 (Standard)
- Maximum Air Consumption (SCFM): 220
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 180
- Maximum Flow Rate (GPM): 130
- Maximum Flow Rate (L/min): 492
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pr
$20,340.00
SANIFORCE AODD PUMP, 3150HS.PS01ASSEFL-SPEP21
GG SP3F.0056
GG SP3F.0056
SANIFORCE AODD PUMP, 3150HS.PS01ASSEFL-SPEP21
SaniForce 3150, 3" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, SP Diaphragms Graco's SaniForce 3150, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 130 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 3 inch sanitary pump with flow rates up to 130 gpm (492 lpm) and pressures up to 120 psi (8 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Flapper check enables passage of solids up to 2.46 in. (62.5 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design $19,070.00
SANIFORCE AODD PUMP, 3150HS.PS01ASSAFL-FKFK21
GG SP3F.0002
GG SP3F.0002
SANIFORCE AODD PUMP, 3150HS.PS01ASSAFL-FKFK21
SaniForce 3150, 3" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, FK Diaphragms Graco's SaniForce 3150, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 130 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 3 inch sanitary pump with flow rates up to 130 gpm (568 lpm) and pressures up to 120 psi (8 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Flapper check enables passage of solids up to 2.46 in. (62.5 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design $16,610.00
Saniforce Aodd Pump, 3150Hs.Ps01Assgfl-Poep21
GG SP3F.0076
GG SP3F.0076
SANIFORCE AODD PUMP, 3150HS.PS01ASSGFL-POEP21
Graco SP3F.0076 SaniForce 3150, 3" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, PO Diaphragms
Graco's SaniForce 3150, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 130 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 3 inch sanitary pump with flow rates up to 130 gpm (492 lpm) and pressures up to 120 psi (8 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- PTFE/EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Flapper check enables passage of solids up to 2.46 in. (62.5 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 3150 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: 316 Stainless Steel Flapper
- Center Section Material: Stainless Steel
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: No Manifold
- Diaphragm Material: PTFE/EPDM Overmold
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food, Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Dual Inlet/Outlet
- Manifold O-Ring Material: EPDM
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 2.1 (Standard)
- Maximum Air Consumption (SCFM): 220
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 180
- Maximum Flow Rate (GPM): 130
- Maximum Flow Rate (L/min): 492
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Solid Size (cm): 6.25
- Maximum Solid Size (in): 2.46
- Maximum Solid
$12,570.00