GRACO INC. S10595
GRACO INC. S10595 branded products
Check-Mate Xl Pump, 20650/250
GG P85LCS
GG P85LCS
CHECK-MATE XL PUMP,20650/250
Graco P85LCS 85:1 - 250cc Check-Mate Pump with XL 10000 Air Motor, Severe Duty Carbon Steel Construction
Graco Supply Pumps reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials to metering and dispensing systems. Maximize your plant's production capacity.
Application: Long-lasting durability - Check-Mate pumps are a time-tested, proven performer- XL 1000 Air Motor
- Low Noise
- Modular design for easier maintenance
- Rugged body armor won't rust or dent
- Highest technology air motor on the market
- 250cc Check-Mate Lower
- Severe Duty coatings on rods and cylinder Extends production time
- Xtreme Coupler - No tool connection
- Quick-disconnect coupler for easy maintenance
- Replaceable Seat
- Minimizes service costs
- Cast Outlet and Inlet Housing
- Improves structural integrity
$24,010.00
KIT, PC CHAMBER, FL, 000
GG PC20FL
GG PC20FL
KIT, PC CHAMBER, FL, 000
Fusion ProConnect Flat 000 Mix Chamber with 0.020 in (0.51 mm) Orifice Size The Fusion ProConnect Flat 000 Mix Chamber is designed for sprayers that prefer a flat spray pattern. All Fusion PC Mix Chambers are protected by an ultra-durable Chromex coating and have been engineered to smoothly slide into position without damaging the side seals. In addition, these mix chambers incorporate an alignment groove specifically designed to ensure proper assembly. Designed for durability and smooth assembly Ultra durable Chromex coating Ramp design for quick assembly and proper sealing Alignment groove ensures proper assembly Available in a variety of sizes and spray patterns $295.00
KIT, PC CHAMBER, WD, 2222
GG PC22WD
GG PC22WD
KIT, PC CHAMBER, WD, 2222
Fusion ProConnect Wide 2222 Mix Chamber with 0.022 in (0.56 mm) Orifice Size The Fusion ProConnect Wide 2222 Mix Chamber is designed for sprayers that prefer a wide spray pattern. All Fusion PC Mix Chambers are protected by an ultra-durable Chromex coating and have been engineered to smoothly slide into position without damaging the side seals. In addition, these mix chambers incorporate an alignment groove specifically designed to ensure proper assembly. Designed for durability and smooth assembly Ultra durable Chromex coating Ramp design for quick assembly and proper sealing Alignment groove ensures proper assembly Available in a variety of sizes and spray patterns $295.00
KIT, PC CHAMBER, FL, 02
GG PC52FL
GG PC52FL
KIT, PC CHAMBER, FL, 02
Fusion ProConnect Flat 02 Mix Chamber with 0.052 in (1.3 mm) Orifice Size The Fusion ProConnect Flat 02 Mix Chamber is designed for sprayers that prefer a flat spray pattern. All Fusion PC Mix Chambers are protected by an ultra-durable Chromex coating and have been engineered to smoothly slide into position without damaging the side seals. In addition, these mix chambers incorporate an alignment groove specifically designed to ensure proper assembly. Designed for durability and smooth assembly Ultra durable Chromex coating Ramp design for quick assembly and proper sealing Alignment groove ensures proper assembly Available in a variety of sizes and spray patterns $295.00
PCF SYSTEM, 016, HTD REG/METER, PN
GG PF2540
GG PF2540
PCF SYSTEM, 016, HTD REG/METER, PN
16 Styles 100-240 VAC Precision Flow System with Heated Mastic Regulator, Heated Standard Resolution Meter and PROFINET User InterfaceReduces material waste with superior flow control. Used in conjunction with a material supply system and robotics platform, the Graco PCF Metering System assures a precise, continuous flow of material. Closed-loop technology provides real-time adjustments for changes in material temperatures, viscosities, dispense rates or robot speeds – providing your operation with a highly precise, continuous dispense.
Handles a range of materials, including ambient, warm melt and hot melt materials to 400°F (204°C) and low to high viscosity materials with unlimited volume.The next generation of precision metering
- Closed-loop "real-time" control ensures a precise, continuous dispense – improves part quality and reduces material waste
- Intuitive user interface simplifies setup, reduces training time
- Integrated USB interface for easy data downloads - allows for further analysis of process data
- Multiple gun capabilities for additional productivity - lets you program up to four guns
- Compact modular design - easy to install, integrate and maintain
- Low cost of ownership - fewer wear parts compared to shot meters
$48,320.00
KIT, PC CHAMBER, RND, 01-02
GG PC47RD
GG PC47RD
KIT, PC CHAMBER, RND, 01-02
Fusion ProConnect Round 01-02 Mix Chamber with 0.047 in (1.2 mm) Orifice Size The Fusion ProConnect Round 01-02 Mix Chamber is designed for sprayers that prefer a round spray pattern. All Fusion PC Mix Chambers are protected by an ultra-durable Chromex coating and have been engineered to smoothly slide into position without damaging the side seals. In addition, these mix chambers incorporate an alignment groove specifically designed to ensure proper assembly. Designed for durability and smooth assembly Ultra durable Chromex coating Ramp design for quick assembly and proper sealing Alignment groove ensures proper assembly Available in a variety of sizes and spray patterns $295.00
PCF System, 016, Mast, No Meter, Io
GG PF2200
GG PF2200
PCF SYSTEM, 016, MAST, NO METER, IO
Graco PF2200 16 Styles 100-240 VAC Precision Flow System with Mastic Regulator, No Meter and Discrete User Interface
Reduces material waste with superior flow control. Used in conjunction with a material supply system and robotics platform, the Graco PCF Metering System assures a precise, continuous flow of material. Closed-loop technology provides real-time adjustments for changes in material temperatures, viscosities, dispense rates or robot speeds – providing your operation with a highly precise, continuous dispense.
Application: Handles a range of materials, including ambient, warm melt and hot melt materials to 400°F (204°C) and low to high viscosity materials with unlimited volume.- The next generation of precision metering
- Closed-loop "real-time" control ensures a precise, continuous dispense – improves part quality and reduces material waste
- Intuitive user interface simplifies setup, reduces training time
- Integrated USB interface for easy data downloads - allows for further analysis of process data
- Multiple gun capabilities for additional productivity - lets you program up to four guns
- Compact modular design - easy to install, integrate and maintain
- Low cost of ownership - fewer wear parts compared to shot meters
- Model: PCF
- Air Inlet Size (in): 1/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Air Outlet Size (in): 5/32
- Ambient/Warm Melt/Hot Melt: Ambient
- Amperage (A): 1.4
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Spray, Metering, Regulating
- Applicator Type: Automatic
- Compatible Material: Sealants, Adhesives
- Component Type: Single Component
- Flow Control Type: Regulation, Control
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 17281.1023622047
- Fluid Outlet Size (in): 3/4
- Fluid Outlet Size (mm): 1728.1102362205
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Frequency (Hz): 50/60
- Gateway: Discrete User Interface
- Gun Activation: Automatic
- Includes: Regulator, FCM Key Token
- Maximum Air Inlet Pressure (bar): 8.27
- Maximum Air Inlet Pressure (kPa): 827
- Maximum Air Inlet Pressure (MPa): 0.83
- Maximum Air Inlet Pressure (psi): 120
- Maximum Ambient Temperature (°C): 49
- Maximum Ambient Temperature (°F): 120
- Maximum Fluid Temperature (°C): 49
- Maximum Fluid Temperature (°F): 120
- Maximum Fluid Viscosity (cP): 1000000
- Maximum Fluid Temperature (°C): 49
- Maximum Fluid Temperature (°F): 120
- Maximum Fluid Viscosity (cP): 1000000
- Maximum Operating Temperature (°C): 49
- Maximum Operating Temperature (°F): 120
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (MPa): 35
- Maximum Working Pressure (psi): 5000
- Measuring Type: Meter
- Meter Type: No Meter
- Minimum Fluid Viscosity (cP): 10000
- Minimum Voltage (V ac): 100
- Number of Styles for Fluid Plate: 16
- Overall Depth (in): 16
- Ove
$25,980.00
Pcf, System, Pcf, 016, Cart, No Meter, Ep
GG PF2120
GG PF2120
PCF, SYSTEM, PCF, 016, CART, NO METER, EP
Graco PF2120 16 Styles 100-240 VAC Precision Flow System with Cartridge Regulator, No Meter and EtherNet/IP User Interface
Reduces material waste with superior flow control. Used in conjunction with a material supply system and robotics platform, the Graco PCF Metering System assures a precise, continuous flow of material. Closed-loop technology provides real-time adjustments for changes in material temperatures, viscosities, dispense rates or robot speeds – providing your operation with a highly precise, continuous dispense.
Application: Handles a range of materials, including ambient, warm melt and hot melt materials to 400°F (204°C) and low to high viscosity materials with unlimited volume.- The next generation of precision metering
- Closed-loop "real-time" control ensures a precise, continuous dispense – improves part quality and reduces material waste
- Intuitive user interface simplifies setup, reduces training time
- Integrated USB interface for easy data downloads - allows for further analysis of process data
- Multiple gun capabilities for additional productivity - lets you program up to four guns
- Compact modular design - easy to install, integrate and maintain
- Low cost of ownership - fewer wear parts compared to shot meters
- Model: PCF
- Air Inlet Size (in): 1/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Air Outlet Size (in): 5/32
- Ambient/Warm Melt/Hot Melt: Ambient
- Amperage (A): 1.4
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Spray, Metering, Regulating
- Applicator Type: Automatic
- Compatible Material: Sealants, Adhesives
- Component Type: Single Component
- Flow Control Type: Regulation, Control
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 17256.6929133858
- Fluid Outlet Size (in): 1/2
- Fluid Outlet Size (mm): 1725.6692913386
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Frequency (Hz): 50/60
- Gateway: EtherNet/IP User Interface
- Gun Activation: Automatic
- Includes: Regulator, FCM Key Token
- Maximum Air Inlet Pressure (bar): 8.27
- Maximum Air Inlet Pressure (kPa): 827
- Maximum Air Inlet Pressure (MPa): 0.83
- Maximum Air Inlet Pressure (psi): 120
- Maximum Ambient Temperature (°C): 49
- Maximum Ambient Temperature (°F): 120
- Maximum Fluid Temperature (°C): 49
- Maximum Fluid Temperature (°F): 120
- Maximum Fluid Viscosity (cP): 1000000
- Maximum Fluid Temperature (°C): 49
- Maximum Fluid Temperature (°F): 120
- Maximum Fluid Viscosity (cP): 1000000
- Maximum Operating Temperature (°C): 49
- Maximum Operating Temperature (°F): 120
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (MPa): 41
- Maximum Working Pressure (psi): 6000
- Measuring Type: Meter
- Meter Type: No Meter
- Minimum Fluid Viscosity (cP): 10000
- Minimum Voltage (V ac): 100
- Number of Styles for Fluid Plate: 16
- Overall Depth (in): 16
$28,120.00
PCF SYSTEM, 002, MAST, HR METER, IO
GG PF1400
GG PF1400
PCF SYSTEM, 002, MAST, HR METER, IO
2 Styles 100-240 VAC Precision Flow System with Mastic Regulator, High Resolution Meter and Discrete User InterfaceReduces material waste with superior flow control. Used in conjunction with a material supply system and robotics platform, the Graco PCF Metering System assures a precise, continuous flow of material. Closed-loop technology provides real-time adjustments for changes in material temperatures, viscosities, dispense rates or robot speeds – providing your operation with a highly precise, continuous dispense.
Handles a range of materials, including ambient, warm melt and hot melt materials to 400°F (204°C) and low to high viscosity materials with unlimited volume.The next generation of precision metering
- Closed-loop "real-time" control ensures a precise, continuous dispense – improves part quality and reduces material waste
- Intuitive user interface simplifies setup, reduces training time
- Integrated USB interface for easy data downloads - allows for further analysis of process data
- Multiple gun capabilities for additional productivity - lets you program up to four guns
- Compact modular design - easy to install, integrate and maintain
- Low cost of ownership - fewer wear parts compared to shot meters
$34,120.00
PCF SYSTEM, 016, MAST, HR METER, IO
GG PF2400
GG PF2400
PCF SYSTEM, 016, MAST, HR METER, IO
16 Styles 100-240 VAC Precision Flow System with Mastic Regulator, High Resolution Meter and Discrete User InterfaceReduces material waste with superior flow control. Used in conjunction with a material supply system and robotics platform, the Graco PCF Metering System assures a precise, continuous flow of material. Closed-loop technology provides real-time adjustments for changes in material temperatures, viscosities, dispense rates or robot speeds – providing your operation with a highly precise, continuous dispense.
Handles a range of materials, including ambient, warm melt and hot melt materials to 400°F (204°C) and low to high viscosity materials with unlimited volume.The next generation of precision metering
- Closed-loop "real-time" control ensures a precise, continuous dispense – improves part quality and reduces material waste
- Intuitive user interface simplifies setup, reduces training time
- Integrated USB interface for easy data downloads - allows for further analysis of process data
- Multiple gun capabilities for additional productivity - lets you program up to four guns
- Compact modular design - easy to install, integrate and maintain
- Low cost of ownership - fewer wear parts compared to shot meters
$39,970.00
Pcf, System, Pcf, 016, Mast, No Meter, Ep
GG PF2220
GG PF2220
PCF, SYSTEM, PCF, 016, MAST, NO METER, EP
Graco PF2220 16 Styles 100-240 VAC Precision Flow System with Mastic Regulator, No Meter and EtherNet/IP User Interface
Reduces material waste with superior flow control. Used in conjunction with a material supply system and robotics platform, the Graco PCF Metering System assures a precise, continuous flow of material. Closed-loop technology provides real-time adjustments for changes in material temperatures, viscosities, dispense rates or robot speeds – providing your operation with a highly precise, continuous dispense.
Application: Handles a range of materials, including ambient, warm melt and hot melt materials to 400°F (204°C) and low to high viscosity materials with unlimited volume.- The next generation of precision metering
- Closed-loop "real-time" control ensures a precise, continuous dispense – improves part quality and reduces material waste
- Intuitive user interface simplifies setup, reduces training time
- Integrated USB interface for easy data downloads - allows for further analysis of process data
- Multiple gun capabilities for additional productivity - lets you program up to four guns
- Compact modular design - easy to install, integrate and maintain
- Low cost of ownership - fewer wear parts compared to shot meters
- Model: PCF
- Air Inlet Size (in): 1/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Air Outlet Size (in): 5/32
- Ambient/Warm Melt/Hot Melt: Ambient
- Amperage (A): 1.4
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Spray, Metering, Regulating
- Applicator Type: Automatic
- Compatible Material: Sealants, Adhesives
- Component Type: Single Component
- Flow Control Type: Regulation, Control
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 17281.1023622047
- Fluid Outlet Size (in): 3/4
- Fluid Outlet Size (mm): 1728.1102362205
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Frequency (Hz): 50/60
- Gateway: EtherNet/IP User Interface
- Gun Activation: Automatic
- Includes: Regulator, FCM Key Token
- Maximum Air Inlet Pressure (bar): 8.27
- Maximum Air Inlet Pressure (kPa): 827
- Maximum Air Inlet Pressure (MPa): 0.83
- Maximum Air Inlet Pressure (psi): 120
- Maximum Ambient Temperature (°C): 49
- Maximum Ambient Temperature (°F): 120
- Maximum Fluid Temperature (°C): 49
- Maximum Fluid Temperature (°F): 120
- Maximum Fluid Viscosity (cP): 1000000
- Maximum Fluid Temperature (°C): 49
- Maximum Fluid Temperature (°F): 120
- Maximum Fluid Viscosity (cP): 1000000
- Maximum Operating Temperature (°C): 49
- Maximum Operating Temperature (°F): 120
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (MPa): 35
- Maximum Working Pressure (psi): 5000
- Measuring Type: Meter
- Meter Type: No Meter
- Minimum Fluid Viscosity (cP): 10000
- Minimum Voltage (V ac): 100
- Number of Styles for Fluid Plate: 16
- Overall Depth (in): 16
$28,120.00
Reactor 2 E-30 System, 10Kw, Elite, P2
GG PH2110
GG PH2110
Reactor 2 E-30 System, 10Kw, Elite, P2 $58,390.00
Gusmer Gh-4 System, 15Kw, 3Ph/N, P2, Multi
GG PHC700
GG PHC700
Gusmer Gh-4 System, 15Kw, 3Ph/N, P2, Multi $54,390.00
Gusmer Gh-4 System, 15Kw, 3Ph, P2, Multi
GG PHC699
GG PHC699
Gusmer Gh-4 System, 15Kw, 3Ph, P2, Multi $54,390.00
Reactor 2 E-Xp2 System, Pkg, Elite, P2
GG PH2112
GG PH2112
Reactor 2 E-Xp2 System, Pkg, Elite, P2 $68,290.00
Reactor 2 H-40 System, 230V, 15Kw, P2
GG PHH043
GG PHH043
Reactor 2 H-40 System, 230V, 15Kw, P2 $68,320.00
Reactor 2 H-Xp3 System, 400, 20Kw, P2
GG PHH076
GG PHH076
Reactor 2 H-Xp3 System, 400, 20Kw, P2 $76,320.00
Reactor 2 H-Xp2 System, Sel, 15Kw, P2
GG PHH062
GG PHH062
Reactor 2 H-Xp2 System, Sel, 15Kw, P2 $69,300.00
Reactor 2 H-Xp3 System, 230, 20Kw, P2
GG PHH074
GG PHH074
Reactor 2 H-Xp3 System, 230, 20Kw, P2 $76,320.00
Reactor 2 H-50 System, 230V, 20Kw, P2
GG PHH053
GG PHH053
Reactor 2 H-50 System, 230V, 20Kw, P2 $71,360.00
Reactor 2 E-30 System, 15Kw, Elite, P2
GG PH2111
GG PH2111
Reactor 2 E-30 System, 15Kw, Elite, P2 $60,660.00
Reactor 2 H-50 System, 400V, 20Kw, P2
GG PHH056
GG PHH056
Reactor 2 H-50 System, 400V, 20Kw, P2 $71,360.00
Reactor 2 H-40 System, 400V, 20Kw, P2
GG PHH046
GG PHH046
Reactor 2 H-40 System, 400V, 20Kw, P2 $69,860.00
Reactor 2 H-40 System, 400V, 15Kw, P2
GG PHH045
GG PHH045
Reactor 2 H-40 System, 400V, 15Kw, P2 $68,320.00
Reactor 2 H-30 System, 15Kw, Elite, P2
GG PHH132
GG PHH132
Reactor 2 H-30 System, 15Kw, Elite, P2 $65,450.00
Reactor 2 H-30 System, 10Kw, Elite, P2
GG PHH131
GG PHH131
Reactor 2 H-30 System, 10Kw, Elite, P2 $63,190.00
Reactor 2 H-40 System, 230V, 20Kw, P2
GG PHH044
GG PHH044
Reactor 2 H-40 System, 230V, 20Kw, P2 $69,860.00
Reactor 2 H-40 System, 400V, 20Kw, Elite, P2
GG PHH146
GG PHH146
Reactor 2 H-40 System, 400V, 20Kw, Elite, P2 $74,170.00
Reactor 2 H-40 System, 230V, 20Kw, Elite, P2
GG PHH144
GG PHH144
Reactor 2 H-40 System, 230V, 20Kw, Elite, P2 $74,170.00
Reactor 2 H-40 System, 230V, 15Kw, Elite, P2
GG PHH143
GG PHH143
Reactor 2 H-40 System, 230V, 15Kw, Elite, P2 $72,630.00
Reactor 2 H-50 System, 230V, 20Kw, Elite, P2
GG PHH153
GG PHH153
Reactor 2 H-50 System, 230V, 20Kw, Elite, P2 $75,680.00
Reactor 2 H-50 System, 400V, 20Kw, Elite, P2
GG PHH156
GG PHH156
Reactor 2 H-50 System, 400V, 20Kw, Elite, P2 $75,680.00
Reactor 2 H-Xp3 System, 230, 20Kw, Elite, P2
GG PHH174
GG PHH174
Reactor 2 H-Xp3 System, 230, 20Kw, Elite, P2 $80,960.00
Reactor 2 H-40 System, 400V, 15Kw, Elite, P2
GG PHH145
GG PHH145
Reactor 2 H-40 System, 400V, 15Kw, Elite, P2 $72,630.00
Reactor 2 H-Xp3 System, 400, 20Kw, Elite, P2
GG PHH176
GG PHH176
Reactor 2 H-Xp3 System, 400, 20Kw, Elite, P2 $80,960.00
PROPORTIONER, MANUAL, METER, NON-HAZ, 3 COLOR, ACID
GG PVMNM08
GG PVMNM08
PROPORTIONER, MANUAL, METER, NON-HAZ, 3 COLOR, ACID
ProMix V Acid Catalyst Meter Package with G3000 meters, 3 colors/1 catalyst, for non-hazardous locations The fifth generation of Graco’s industry-leading ProMix plural component platform delivers the technology, data, and ease of use required for continuous improvement. Built on the trusted legacy of our sequential dosing technology, the system ensures on-ratio accuracy that protects your finish—and your brand—from costly field failures. Precision isn’t optional—it’s mission-critical. Tried and trusted sequential dosing technology can handle 2k solvent-borne coatings, polyurethanes and epoxies up to a ratio of 50:1. On-Ratio, Every Time - At the core of this system are our proven G3000 meters, delivering precise, consistent 2K mixing—even under high-pressure production demands. Maximized Color Flexibility - Need fast color changeovers? No problem. This system has air/solvent chop standard on all models, enabling quicker transitions with minimal waste and downtime. Efficiency that Pays - From reduced solvent use to faster changeovers, everything is designed to limit waste and maximize uptime. Remote Monitoring for Real-Time Control - Stay connected and in control. With remote monitoring capabilities accessible through a secure web browser, you can check system performance, confirm mix accuracy, and respond to issues—without being in the paint booth. Smarter Control at the Booth - The booth control module puts critical insight at the painter’s fingertips—with intuitive operation and real-time data like flow rate, pot life, and system alerts. Smarter Maintenance Starts Here - A streamlined fluid path and reduced part count mean less time spent on upkeep—and more time keeping your line running at full speed. $34,170.00
PROPORTIONER, MANUAL, METER, NON-HAZ, 3 COLOR, 2 GFB
GG PVMNM07
GG PVMNM07
PROPORTIONER, MANUAL, METER, NON-HAZ, 3 COLOR, 2 GFB
ProMix V Meter Package with G3000 meters, 3 colors/1 catalyst, 2 gun flush boxes, for non-hazardous locations The fifth generation of Graco’s industry-leading ProMix plural component platform delivers the technology, data, and ease of use required for continuous improvement. Built on the trusted legacy of our sequential dosing technology, the system ensures on-ratio accuracy that protects your finish—and your brand—from costly field failures. Precision isn’t optional—it’s mission-critical. Tried and trusted sequential dosing technology can handle 2k solvent-borne coatings, polyurethanes and epoxies up to a ratio of 50:1. On-Ratio, Every Time - At the core of this system are our proven G3000 meters, delivering precise, consistent 2K mixing—even under high-pressure production demands. Maximized Color Flexibility - Need fast color changeovers? No problem. This system has air/solvent chop standard on all models, enabling quicker transitions with minimal waste and downtime. Efficiency that Pays - From reduced solvent use to faster changeovers, everything is designed to limit waste and maximize uptime. Remote Monitoring for Real-Time Control - Stay connected and in control. With remote monitoring capabilities accessible through a secure web browser, you can check system performance, confirm mix accuracy, and respond to issues—without being in the paint booth. Smarter Control at the Booth - The booth control module puts critical insight at the painter’s fingertips—with intuitive operation and real-time data like flow rate, pot life, and system alerts. Cut Downtime, Control Costs - With quick and thorough cleaning, gun flush boxes help minimize manual labor, prevent costly changeovers, and keep your spray operation efficient and productive. Smarter Maintenance Starts Here - A streamlined fluid path and reduced part count mean less time spent on upkeep—and more time keeping your line running at full speed. $44,880.00
PROPORTIONER, MANUAL, METER, NON-HAZ, 1 COLOR
GG PVMNM01
GG PVMNM01
PROPORTIONER, MANUAL, METER, NON-HAZ, 1 COLOR
ProMix V Meter Package with G3000 meters, 1 color/1 catalyst, for non-hazardous locations The fifth generation of Graco’s industry-leading ProMix plural component platform delivers the technology, data, and ease of use required for continuous improvement. Built on the trusted legacy of our sequential dosing technology, the system ensures on-ratio accuracy that protects your finish—and your brand—from costly field failures. Precision isn’t optional—it’s mission-critical. Tried and trusted sequential dosing technology can handle 2k solvent-borne coatings, polyurethanes and epoxies up to a ratio of 50:1. On-Ratio, Every Time - At the core of this system are our proven G3000 meters, delivering precise, consistent 2K mixing—even under high-pressure production demands. Maximized Color Flexibility - Need fast color changeovers? No problem. This system has air/solvent chop standard on all models, enabling quicker transitions with minimal waste and downtime. Efficiency that Pays - From reduced solvent use to faster changeovers, everything is designed to limit waste and maximize uptime. Remote Monitoring for Real-Time Control - Stay connected and in control. With remote monitoring capabilities accessible through a secure web browser, you can check system performance, confirm mix accuracy, and respond to issues—without being in the paint booth. Smarter Control at the Booth - The booth control module puts critical insight at the painter’s fingertips—with intuitive operation and real-time data like flow rate, pot life, and system alerts. Smarter Maintenance Starts Here - A streamlined fluid path and reduced part count mean less time spent on upkeep—and more time keeping your line running at full speed. $24,740.00
PROPORTIONER, MANUAL, METER, NON-HAZ, 3 COLOR, 1 GFB
GG PVMNM06
GG PVMNM06
PROPORTIONER, MANUAL, METER, NON-HAZ, 3 COLOR, 1 GFB
ProMix V Meter Package with G3000 meters, 3 colors/1 catalyst, 1 gun flush box, for non-hazardous locations The fifth generation of Graco’s industry-leading ProMix plural component platform delivers the technology, data, and ease of use required for continuous improvement. Built on the trusted legacy of our sequential dosing technology, the system ensures on-ratio accuracy that protects your finish—and your brand—from costly field failures. Precision isn’t optional—it’s mission-critical. Tried and trusted sequential dosing technology can handle 2k solvent-borne coatings, polyurethanes and epoxies up to a ratio of 50:1. On-Ratio, Every Time - At the core of this system are our proven G3000 meters, delivering precise, consistent 2K mixing—even under high-pressure production demands. Maximized Color Flexibility - Need fast color changeovers? No problem. This system has air/solvent chop standard on all models, enabling quicker transitions with minimal waste and downtime. Efficiency that Pays - From reduced solvent use to faster changeovers, everything is designed to limit waste and maximize uptime. Remote Monitoring for Real-Time Control - Stay connected and in control. With remote monitoring capabilities accessible through a secure web browser, you can check system performance, confirm mix accuracy, and respond to issues—without being in the paint booth. Smarter Control at the Booth - The booth control module puts critical insight at the painter’s fingertips—with intuitive operation and real-time data like flow rate, pot life, and system alerts. Cut Downtime, Control Costs - With quick and thorough cleaning, gun flush boxes help minimize manual labor, prevent costly changeovers, and keep your spray operation efficient and productive. Smarter Maintenance Starts Here - A streamlined fluid path and reduced part count mean less time spent on upkeep—and more time keeping your line running at full speed. $37,230.00
PROPORTIONER, MANUAL, METER, NON-HAZ, 1 COLOR, 1 GFB
GG PVMNM02
GG PVMNM02
PROPORTIONER, MANUAL, METER, NON-HAZ, 1 COLOR, 1 GFB
ProMix V Meter Package with G3000 meters, 1 color/1 catalyst, 1 gun flush box, for non-hazardous locations The fifth generation of Graco’s industry-leading ProMix plural component platform delivers the technology, data, and ease of use required for continuous improvement. Built on the trusted legacy of our sequential dosing technology, the system ensures on-ratio accuracy that protects your finish—and your brand—from costly field failures. Precision isn’t optional—it’s mission-critical. Tried and trusted sequential dosing technology can handle 2k solvent-borne coatings, polyurethanes and epoxies up to a ratio of 50:1. On-Ratio, Every Time - At the core of this system are our proven G3000 meters, delivering precise, consistent 2K mixing—even under high-pressure production demands. Maximized Color Flexibility - Need fast color changeovers? No problem. This system has air/solvent chop standard on all models, enabling quicker transitions with minimal waste and downtime. Efficiency that Pays - From reduced solvent use to faster changeovers, everything is designed to limit waste and maximize uptime. Remote Monitoring for Real-Time Control - Stay connected and in control. With remote monitoring capabilities accessible through a secure web browser, you can check system performance, confirm mix accuracy, and respond to issues—without being in the paint booth. Smarter Control at the Booth - The booth control module puts critical insight at the painter’s fingertips—with intuitive operation and real-time data like flow rate, pot life, and system alerts. Cut Downtime, Control Costs - With quick and thorough cleaning, gun flush boxes help minimize manual labor, prevent costly changeovers, and keep your spray operation efficient and productive. Smarter Maintenance Starts Here - A streamlined fluid path and reduced part count mean less time spent on upkeep—and more time keeping your line running at full speed. $32,390.00
Reactor 2 H-Xp2 System, Sel, 15Kw, Elite, P2
GG PHH162
GG PHH162
Reactor 2 H-Xp2 System, Sel, 15Kw, Elite, P2 $73,670.00
PROPORTIONER, MANUAL, METER, NON-HAZ, 3 COLOR
GG PVMNM05
GG PVMNM05
PROPORTIONER, MANUAL, METER, NON-HAZ, 3 COLOR
ProMix V Meter Package with G3000 meters, 3 colors/1 catalyst, for non-hazardous locations The fifth generation of Graco’s industry-leading ProMix plural component platform delivers the technology, data, and ease of use required for continuous improvement. Built on the trusted legacy of our sequential dosing technology, the system ensures on-ratio accuracy that protects your finish—and your brand—from costly field failures. Precision isn’t optional—it’s mission-critical. Tried and trusted sequential dosing technology can handle 2k solvent-borne coatings, polyurethanes and epoxies up to a ratio of 50:1. On-Ratio, Every Time - At the core of this system are our proven G3000 meters, delivering precise, consistent 2K mixing—even under high-pressure production demands. Maximized Color Flexibility - Need fast color changeovers? No problem. This system has air/solvent chop standard on all models, enabling quicker transitions with minimal waste and downtime. Efficiency that Pays - From reduced solvent use to faster changeovers, everything is designed to limit waste and maximize uptime. Remote Monitoring for Real-Time Control - Stay connected and in control. With remote monitoring capabilities accessible through a secure web browser, you can check system performance, confirm mix accuracy, and respond to issues—without being in the paint booth. Smarter Control at the Booth - The booth control module puts critical insight at the painter’s fingertips—with intuitive operation and real-time data like flow rate, pot life, and system alerts. Cut Downtime, Control Costs - With quick and thorough cleaning, gun flush boxes help minimize manual labor, prevent costly changeovers, and keep your spray operation efficient and productive. Smarter Maintenance Starts Here - A streamlined fluid path and reduced part count mean less time spent on upkeep—and more time keeping your line running at full speed. $29,580.00
PROPORTIONER, MANUAL, METER, NON-HAZ, 1 COLOR, 2 GFB, WIFI
GG PVMNM15
GG PVMNM15
PROPORTIONER, MANUAL, METER, NON-HAZ, 1 COLOR, 2 GFB, WIFI
ProMix V Meter Package with G3000 meters and WiFi module, 1 color/1 catalyst, 2 gun flush boxes, for non-hazardous locations The fifth generation of Graco’s industry-leading ProMix plural component platform delivers the technology, data, and ease of use required for continuous improvement. Built on the trusted legacy of our sequential dosing technology, the system ensures on-ratio accuracy that protects your finish—and your brand—from costly field failures. Precision isn’t optional—it’s mission-critical. Tried and trusted sequential dosing technology can handle 2k solvent-borne coatings, polyurethanes and epoxies up to a ratio of 50:1. On-Ratio, Every Time - At the core of this system are our proven G3000 meters, delivering precise, consistent 2K mixing—even under high-pressure production demands. Maximized Color Flexibility - Need fast color changeovers? No problem. This system has air/solvent chop standard on all models, enabling quicker transitions with minimal waste and downtime. Efficiency that Pays - From reduced solvent use to faster changeovers, everything is designed to limit waste and maximize uptime. Remote Monitoring for Real-Time Control - Stay connected and in control. With remote monitoring capabilities accessible through a secure web browser, you can check system performance, confirm mix accuracy, and respond to issues—without being in the paint booth. Smarter Control at the Booth - The booth control module puts critical insight at the painter’s fingertips—with intuitive operation and real-time data like flow rate, pot life, and system alerts. Cut Downtime, Control Costs - With quick and thorough cleaning, gun flush boxes help minimize manual labor, prevent costly changeovers, and keep your spray operation efficient and productive. Smarter Maintenance Starts Here - A streamlined fluid path and reduced part count mean less time spent on upkeep—and more time keeping your line running at full speed. $40,290.00
PROPORTIONER, MANUAL, METER, NON-HAZ, 1 COLOR, 2 GFB
GG PVMNM03
GG PVMNM03
PROPORTIONER, MANUAL, METER, NON-HAZ, 1 COLOR, 2 GFB
ProMix V Meter Package with G3000 meters, 1 color/1 catalyst, 2 gun flush boxes, for non-hazardous locations The fifth generation of Graco’s industry-leading ProMix plural component platform delivers the technology, data, and ease of use required for continuous improvement. Built on the trusted legacy of our sequential dosing technology, the system ensures on-ratio accuracy that protects your finish—and your brand—from costly field failures. Precision isn’t optional—it’s mission-critical. Tried and trusted sequential dosing technology can handle 2k solvent-borne coatings, polyurethanes and epoxies up to a ratio of 50:1. On-Ratio, Every Time - At the core of this system are our proven G3000 meters, delivering precise, consistent 2K mixing—even under high-pressure production demands. Maximized Color Flexibility - Need fast color changeovers? No problem. This system has air/solvent chop standard on all models, enabling quicker transitions with minimal waste and downtime. Efficiency that Pays - From reduced solvent use to faster changeovers, everything is designed to limit waste and maximize uptime. Remote Monitoring for Real-Time Control - Stay connected and in control. With remote monitoring capabilities accessible through a secure web browser, you can check system performance, confirm mix accuracy, and respond to issues—without being in the paint booth. Smarter Control at the Booth - The booth control module puts critical insight at the painter’s fingertips—with intuitive operation and real-time data like flow rate, pot life, and system alerts. Cut Downtime, Control Costs - With quick and thorough cleaning, gun flush boxes help minimize manual labor, prevent costly changeovers, and keep your spray operation efficient and productive. Smarter Maintenance Starts Here - A streamlined fluid path and reduced part count mean less time spent on upkeep—and more time keeping your line running at full speed. $40,040.00
PROPORTIONER, MANUAL, METER, NON-HAZ, 1 COLOR, ACID
GG PVMNM04
GG PVMNM04
PROPORTIONER, MANUAL, METER, NON-HAZ, 1 COLOR, ACID
ProMix V Acid Catalyst Meter Package with G3000 meters, 1 color/1 catalyst, for non-hazardous locations The fifth generation of Graco’s industry-leading ProMix plural component platform delivers the technology, data, and ease of use required for continuous improvement. Built on the trusted legacy of our sequential dosing technology, the system ensures on-ratio accuracy that protects your finish—and your brand—from costly field failures. Precision isn’t optional—it’s mission-critical. Tried and trusted sequential dosing technology can handle 2k solvent-borne coatings, polyurethanes and epoxies up to a ratio of 50:1. On-Ratio, Every Time - At the core of this system are our proven G3000 meters, delivering precise, consistent 2K mixing—even under high-pressure production demands. Maximized Color Flexibility - Need fast color changeovers? No problem. This system has air/solvent chop standard on all models, enabling quicker transitions with minimal waste and downtime. Efficiency that Pays - From reduced solvent use to faster changeovers, everything is designed to limit waste and maximize uptime. Remote Monitoring for Real-Time Control - Stay connected and in control. With remote monitoring capabilities accessible through a secure web browser, you can check system performance, confirm mix accuracy, and respond to issues—without being in the paint booth. Smarter Control at the Booth - The booth control module puts critical insight at the painter’s fingertips—with intuitive operation and real-time data like flow rate, pot life, and system alerts. Smarter Maintenance Starts Here - A streamlined fluid path and reduced part count mean less time spent on upkeep—and more time keeping your line running at full speed. $29,330.00
PROPORTIONER, MANUAL, METER, NON-HAZ, 1 COLOR, WIFI
GG PVMNM13
GG PVMNM13
PROPORTIONER, MANUAL, METER, NON-HAZ, 1 COLOR, WIFI
ProMix V Meter Package with G3000 meters and WiFi module, 1 color/1 catalyst, for non-hazardous locations The fifth generation of Graco’s industry-leading ProMix plural component platform delivers the technology, data, and ease of use required for continuous improvement. Built on the trusted legacy of our sequential dosing technology, the system ensures on-ratio accuracy that protects your finish—and your brand—from costly field failures. Precision isn’t optional—it’s mission-critical. Tried and trusted sequential dosing technology can handle 2k solvent-borne coatings, polyurethanes and epoxies up to a ratio of 50:1. On-Ratio, Every Time - At the core of this system are our proven G3000 meters, delivering precise, consistent 2K mixing—even under high-pressure production demands. Maximized Color Flexibility - Need fast color changeovers? No problem. This system has air/solvent chop standard on all models, enabling quicker transitions with minimal waste and downtime. Efficiency that Pays - From reduced solvent use to faster changeovers, everything is designed to limit waste and maximize uptime. Remote Monitoring for Real-Time Control - Stay connected and in control. With remote monitoring capabilities accessible through a secure web browser, you can check system performance, confirm mix accuracy, and respond to issues—without being in the paint booth. Smarter Control at the Booth - The booth control module puts critical insight at the painter’s fingertips—with intuitive operation and real-time data like flow rate, pot life, and system alerts. Smarter Maintenance Starts Here - A streamlined fluid path and reduced part count mean less time spent on upkeep—and more time keeping your line running at full speed. $24,990.00
PROPORTIONER, MANUAL, METER, NON-HAZ, 5 COLOR, 2 GFB
GG PVMNM11
GG PVMNM11
PROPORTIONER, MANUAL, METER, NON-HAZ, 5 COLOR, 2 GFB
ProMix V Meter Package with G3000 meters, 5 colors/1 catalyst, 2 gun flush boxes, for non-hazardous locations The fifth generation of Graco’s industry-leading ProMix plural component platform delivers the technology, data, and ease of use required for continuous improvement. Built on the trusted legacy of our sequential dosing technology, the system ensures on-ratio accuracy that protects your finish—and your brand—from costly field failures. Precision isn’t optional—it’s mission-critical. Tried and trusted sequential dosing technology can handle 2k solvent-borne coatings, polyurethanes and epoxies up to a ratio of 50:1. On-Ratio, Every Time - At the core of this system are our proven G3000 meters, delivering precise, consistent 2K mixing—even under high-pressure production demands. Maximized Color Flexibility - Need fast color changeovers? No problem. This system has air/solvent chop standard on all models, enabling quicker transitions with minimal waste and downtime. Efficiency that Pays - From reduced solvent use to faster changeovers, everything is designed to limit waste and maximize uptime. Remote Monitoring for Real-Time Control - Stay connected and in control. With remote monitoring capabilities accessible through a secure web browser, you can check system performance, confirm mix accuracy, and respond to issues—without being in the paint booth. Smarter Control at the Booth - The booth control module puts critical insight at the painter’s fingertips—with intuitive operation and real-time data like flow rate, pot life, and system alerts. Cut Downtime, Control Costs - With quick and thorough cleaning, gun flush boxes help minimize manual labor, prevent costly changeovers, and keep your spray operation efficient and productive. Smarter Maintenance Starts Here - A streamlined fluid path and reduced part count mean less time spent on upkeep—and more time keeping your line running at full speed. $49,470.00
PROPORTIONER, MANUAL, METER, NON-HAZ, 5 COLOR, ACID
GG PVMNM12
GG PVMNM12
PROPORTIONER, MANUAL, METER, NON-HAZ, 5 COLOR, ACID
ProMix V Acid Catalyst Meter Package with G3000 meters, 5 colors/1 catalyst, for non-hazardous locations The fifth generation of Graco’s industry-leading ProMix plural component platform delivers the technology, data, and ease of use required for continuous improvement. Built on the trusted legacy of our sequential dosing technology, the system ensures on-ratio accuracy that protects your finish—and your brand—from costly field failures. Precision isn’t optional—it’s mission-critical. Tried and trusted sequential dosing technology can handle 2k solvent-borne coatings, polyurethanes and epoxies up to a ratio of 50:1. On-Ratio, Every Time - At the core of this system are our proven G3000 meters, delivering precise, consistent 2K mixing—even under high-pressure production demands. Maximized Color Flexibility - Need fast color changeovers? No problem. This system has air/solvent chop standard on all models, enabling quicker transitions with minimal waste and downtime. Efficiency that Pays - From reduced solvent use to faster changeovers, everything is designed to limit waste and maximize uptime. Remote Monitoring for Real-Time Control - Stay connected and in control. With remote monitoring capabilities accessible through a secure web browser, you can check system performance, confirm mix accuracy, and respond to issues—without being in the paint booth. Smarter Control at the Booth - The booth control module puts critical insight at the painter’s fingertips—with intuitive operation and real-time data like flow rate, pot life, and system alerts. Smarter Maintenance Starts Here - A streamlined fluid path and reduced part count mean less time spent on upkeep—and more time keeping your line running at full speed. $38,760.00
PROPORTIONER, MANUAL, METER, NON-HAZ, 1 COLOR, 1 GFB, WIFI
GG PVMNM14
GG PVMNM14
PROPORTIONER, MANUAL, METER, NON-HAZ, 1 COLOR, 1 GFB, WIFI
ProMix V Meter Package with G3000 meters and WiFi module, 1 color/1 catalyst, 1 gun flush box, for non-hazardous locations The fifth generation of Graco’s industry-leading ProMix plural component platform delivers the technology, data, and ease of use required for continuous improvement. Built on the trusted legacy of our sequential dosing technology, the system ensures on-ratio accuracy that protects your finish—and your brand—from costly field failures. Precision isn’t optional—it’s mission-critical. Tried and trusted sequential dosing technology can handle 2k solvent-borne coatings, polyurethanes and epoxies up to a ratio of 50:1. On-Ratio, Every Time - At the core of this system are our proven G3000 meters, delivering precise, consistent 2K mixing—even under high-pressure production demands. Maximized Color Flexibility - Need fast color changeovers? No problem. This system has air/solvent chop standard on all models, enabling quicker transitions with minimal waste and downtime. Efficiency that Pays - From reduced solvent use to faster changeovers, everything is designed to limit waste and maximize uptime. Remote Monitoring for Real-Time Control - Stay connected and in control. With remote monitoring capabilities accessible through a secure web browser, you can check system performance, confirm mix accuracy, and respond to issues—without being in the paint booth. Smarter Control at the Booth - The booth control module puts critical insight at the painter’s fingertips—with intuitive operation and real-time data like flow rate, pot life, and system alerts. Cut Downtime, Control Costs - With quick and thorough cleaning, gun flush boxes help minimize manual labor, prevent costly changeovers, and keep your spray operation efficient and productive. Smarter Maintenance Starts Here - A streamlined fluid path and reduced part count mean less time spent on upkeep—and more time keeping your line running at full speed. $32,640.00