GRACO INC. S10595
GRACO INC. S10595 branded products
SANIFORCE AODD PUMP, 3150HS.PSP1ASSEFL-PSEP21
GG SP3F.0054
GG SP3F.0054
SANIFORCE AODD PUMP, 3150HS.PSP1ASSEFL-PSEP21
SaniForce 3150, 3" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, PS Diaphragms Graco's SaniForce 3150, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 130 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 3 inch sanitary pump with flow rates up to 130 gpm (492 lpm) and pressures up to 120 psi (8 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Flapper check enables passage of solids up to 2.46 in. (62.5 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
$19,980.00
Saniforce Aodd Pump, 3150Hs.Ps01Assgfl-Eoep21
GG SP3F.0072
GG SP3F.0072
SANIFORCE AODD PUMP, 3150HS.PS01ASSGFL-EOEP21
Graco SP3F.0072 SaniForce 3150, 3" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, EO Diaphragms
Graco's SaniForce 3150, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 130 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 3 inch sanitary pump with flow rates up to 130 gpm (492 lpm) and pressures up to 120 psi (8 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Flapper check enables passage of solids up to 2.46 in. (62.5 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 3150 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: 316 Stainless Steel Flapper
- Center Section Material: Stainless Steel
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: No Manifold
- Diaphragm Material: EPDM Overmold
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food, Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Dual Inlet/Outlet
- Manifold O-Ring Material: EPDM
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 2.1 (Standard)
- Maximum Air Consumption (SCFM): 220
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 180
- Maximum Flow Rate (GPM): 130
- Maximum Flow Rate (L/min): 492
- Maximum Fluid Operating Temperature (°C): 121
- Maximum Fluid Operating Temperature (°F): 250
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Fluid Operating Temperature (°C): 121
- Maximum Fluid Operating Temperature (°F): 250
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Solid Size (cm): 6.25
- Maximum Solid Size (in): 2.46
- Maximum Solid Size (mm
$12,350.00
Saniforce Aodd Pump, 3150Hs.Psp1Assgfl-Psep21
GG SP3F.0078
GG SP3F.0078
SANIFORCE AODD PUMP, 3150HS.PSP1ASSGFL-PSEP21
Graco SP3F.0078 SaniForce 3150, 3" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, PS Diaphragms
Graco's SaniForce 3150, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 130 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 3 inch sanitary pump with flow rates up to 130 gpm (492 lpm) and pressures up to 120 psi (8 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Flapper check enables passage of solids up to 2.46 in. (62.5 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 3150 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: 316 Stainless Steel Flapper
- Center Section Material: Stainless Steel
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: No Manifold
- Diaphragm Material: PTFE/Santoprene 2-Piece
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food, Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Dual Inlet/Outlet
- Manifold O-Ring Material: EPDM
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 2.1 (Standard)
- Maximum Air Consumption (SCFM): 220
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 180
- Maximum Flow Rate (GPM): 130
- Maximum Flow Rate (L/min): 492
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Solid Size (cm): 6.25
- Maximum Solid Size (in): 2.46
- Maximum Solid Size (mm): 62.5
- Minimum Fluid Operating Temperature (°C): -40
- Minimum Fluid Operating Temperature (°F): -40
$12,250.00
SANIFORCE AODD PUMP, 3150HS.PS01ASSGFL-SPEP21
GG SP3F.0080
GG SP3F.0080
SANIFORCE AODD PUMP, 3150HS.PS01ASSGFL-SPEP21
SaniForce 3150, 3" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, SP Diaphragms Graco's SaniForce 3150, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 130 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 3 inch sanitary pump with flow rates up to 130 gpm (492 lpm) and pressures up to 120 psi (8 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Flapper check enables passage of solids up to 2.46 in. (62.5 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
$12,050.00
Saniforce Aodd Pump, 3150Hs.Ps01Assafl-Bnbn21
GG SP3F.0084
GG SP3F.0084
SANIFORCE AODD PUMP, 3150HS.PS01ASSAFL-BNBN21
Graco SP3F.0084 SaniForce 3150, 3" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, BN Diaphragms
Graco's SaniForce 3150, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 130 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 3 inch sanitary pump with flow rates up to 130 gpm (492 lpm) and pressures up to 120 psi (8 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Flapper check enables passage of solids up to 2.46 in. (62.5 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 3150 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: 316 Stainless Steel Flapper
- Center Section Material: Stainless Steel
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: Tri-Clamp
- Diaphragm Material: Buna-N
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food and Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Center Port
- Manifold O-Ring Material: Buna
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 2.1 (Standard)
- Maximum Air Consumption (SCFM): 220
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 180
- Maximum Flow Rate (GPM): 130
- Maximum Flow Rate (L/min): 492
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Solid Size (cm): 6.25
- Maximum Solid Size (in): 2.46
- Maximum Solid Size (mm): 62.5
$15,680.00
Saniforce Aodd Pump, 3150Hs.Ps01Assgfl-Bnbn21
GG SP3F.0096
GG SP3F.0096
SANIFORCE AODD PUMP, 3150HS.PS01ASSGFL-BNBN21
Graco SP3F.0096 SaniForce 3150, 3" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, BN Diaphragms
Graco's SaniForce 3150, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 130 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 3 inch sanitary pump with flow rates up to 130 gpm (492 lpm) and pressures up to 120 psi (8 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Flapper check enables passage of solids up to 2.46 in. (62.5 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 3150 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: 316 Stainless Steel Flapper
- Center Section Material: Stainless Steel
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: No Manifold
- Diaphragm Material: Buna-N
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food and Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Dual Inlet/Outlet
- Manifold O-Ring Material: Buna
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 2.1 (Standard)
- Maximum Air Consumption (SCFM): 220
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 180
- Maximum Flow Rate (GPM): 130
- Maximum Flow Rate (L/min): 492
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Solid Size (cm): 6.25
- Maximum Solid Size (in): 2.46
- Maximum Solid Size (mm): 62.5
- Minimum Fluid Operating Temperature (°C): -12
- Minimum Fluid Operating Temperature (°F): 10
- Overall
$12,960.00
Saniforce Aodd Pump, 3150Hs.Ps01Assefl-Bnbn21
GG SP3F.0092
GG SP3F.0092
SANIFORCE AODD PUMP, 3150HS.PS01ASSEFL-BNBN21
Graco SP3F.0092 SaniForce 3150, 3" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, BN Diaphragms
Graco's SaniForce 3150, 3-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 130 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 3 inch sanitary pump with flow rates up to 130 gpm (492 lpm) and pressures up to 120 psi (8 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Flapper check enables passage of solids up to 2.46 in. (62.5 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 3150 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: 316 Stainless Steel Flapper
- Center Section Material: Stainless Steel
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: Tri-Clamp
- Diaphragm Material: Buna-N
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food and Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Center Port Wye
- Manifold O-Ring Material: Buna
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 2.1 (Standard)
- Maximum Air Consumption (SCFM): 220
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 180
- Maximum Flow Rate (GPM): 130
- Maximum Flow Rate (L/min): 492
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Solid Size (cm): 6.25
- Maximum Solid Size (in): 2.46
- Maximum Solid Size (mm): 62.5
- <
$18,590.00
Housing, Packing, B200, B240 indust
GG SP433005
GG SP433005
Housing, Packing, B200, B240 Indust
$350.00
Saniforce Aodd Pump, 4150Hs.Ps01Assgfl-Eoep21
GG SP4F.0048
GG SP4F.0048
SANIFORCE AODD PUMP, 4150HS.PS01ASSGFL-EOEP21
Graco SP4F.0048 SaniForce 4150, 4" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, EO Diaphragms
Graco's SaniForce 4150, 4-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 90 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 4 inch sanitary pump with flow rates up to 90 gpm (340 lpm) and pressures up to 120 psi (8 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Flapper check enables passage of solids up to 3.8 in. (96.5 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 4150 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: 316 Stainless Steel Flapper
- Center Section Material: Stainless Steel
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: No Manifold
- Diaphragm Material: EPDM Overmold
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food, Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Dual Inlet/Outlet
- Manifold O-Ring Material: EPDM
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 2.1 (Standard)
- Maximum Air Consumption (SCFM): 235
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 225
- Maximum Flow Rate (GPM): 90
- Maximum Flow Rate (L/min): 340
- Maximum Fluid Operating Temperature (°C): 121
- Maximum Fluid Operating Temperature (°F): 250
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Fluid Operating Temperature (°C): 121
- Maximum Fluid Operating Temperature (°F): 250
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Solid Size (cm): 9.65
- Maximum Solid Size (in): 3.8
- Maximum Solid Size (mm):
$15,330.00
Saniforce Aodd Pump, 4150Hs.Psp1Assefl-Psep21
GG SP4F.0030
GG SP4F.0030
SANIFORCE AODD PUMP, 4150HS.PSP1ASSEFL-PSEP21
Graco SP4F.0030 SaniForce 4150, 4" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, PS Diaphragms
Graco's SaniForce 4150, 4-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 90 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 4 inch sanitary pump with flow rates up to 90 gpm (340 lpm) and pressures up to 120 psi (8 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Flapper check enables passage of solids up to 3.8 in. (96.5 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 4150 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: 316 Stainless Steel Flapper
- Center Section Material: Stainless Steel
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: Tri-Clamp
- Diaphragm Material: PTFE/Santoprene 2-Piece
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food, Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Center Port Wye
- Manifold O-Ring Material: EPDM
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 2.1 (Standard)
- Maximum Air Consumption (SCFM): 235
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 225
- Maximum Flow Rate (GPM): 90
- Maximum Flow Rate (L/min): 340
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Solid Size (cm): 9.65
- Maximum Solid Size (in): 3.8
- Maximum Solid Size (mm): 96.5 <
$24,180.00
SANIFORCE AODD PUMP, 4150HS.PS01ASSAFL-EOEP21
GG SP4F.0000
GG SP4F.0000
SANIFORCE AODD PUMP, 4150HS.PS01ASSAFL-EOEP21
SaniForce 4150, 4" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, EO Diaphragms Graco's SaniForce 4150, 4-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 90 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 4 inch sanitary pump with flow rates up to 90 gpm (340 lpm) and pressures up to 120 psi (8 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Flapper check enables passage of solids up to 3.8 in. (96.5 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
$23,250.00
SANIFORCE AODD PUMP, 4150HS.PS01ASSEFL-SPEP21
GG SP4F.0032
GG SP4F.0032
SANIFORCE AODD PUMP, 4150HS.PS01ASSEFL-SPEP21
SaniForce 4150, 4" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, SP Diaphragms Graco's SaniForce 4150, 4-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 90 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 4 inch sanitary pump with flow rates up to 90 gpm (340 lpm) and pressures up to 120 psi (8 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Flapper check enables passage of solids up to 3.8 in. (96.5 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
$24,030.00
Saniforce Aodd Pump, 4150Hs.Psp1Assafl-Psep21
GG SP4F.0006
GG SP4F.0006
SANIFORCE AODD PUMP, 4150HS.PSP1ASSAFL-PSEP21
Graco SP4F.0006 SaniForce 4150, 4" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, PS Diaphragms
Graco's SaniForce 4150, 4-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 90 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 4 inch sanitary pump with flow rates up to 90 gpm (340 lpm) and pressures up to 120 psi (8 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Flapper check enables passage of solids up to 3.8 in. (96.5 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 4150 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: 316 Stainless Steel Flapper
- Center Section Material: Stainless Steel
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: Tri-Clamp
- Diaphragm Material: PTFE/Santoprene 2-Piece
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food, Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Center Port
- Manifold O-Ring Material: EPDM
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 2.1 (Standard)
- Maximum Air Consumption (SCFM): 235
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 225
- Maximum Flow Rate (GPM): 90
- Maximum Flow Rate (L/min): 340
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Solid Size (cm): 9.65
- Maximum Solid Size (in): 3.8
- Maximum Solid Size (mm): 96.5
$23,130.00
Saniforce Aodd Pump, 4150Hs.Ps01Assefl-Poep21
GG SP4F.0028
GG SP4F.0028
SANIFORCE AODD PUMP, 4150HS.PS01ASSEFL-POEP21
Graco SP4F.0028 SaniForce 4150, 4" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, PO Diaphragms
Graco's SaniForce 4150, 4-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 90 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 4 inch sanitary pump with flow rates up to 90 gpm (340 lpm) and pressures up to 120 psi (8 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
- PTFE/EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Flapper check enables passage of solids up to 3.8 in. (96.5 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 4150 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: 316 Stainless Steel Flapper
- Center Section Material: Stainless Steel
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: Tri-Clamp
- Diaphragm Material: PTFE/EPDM Overmold
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food, Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Center Port Wye
- Manifold O-Ring Material: EPDM
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 2.1 (Standard)
- Maximum Air Consumption (SCFM): 235
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 225
- Maximum Flow Rate (GPM): 90
- Maximum Flow Rate (L/min): 340
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressu
$24,530.00
Saniforce Aodd Pump, 4150Hs.Ps01Assefl-Eoep21
GG SP4F.0024
GG SP4F.0024
SANIFORCE AODD PUMP, 4150HS.PS01ASSEFL-EOEP21
Graco SP4F.0024 SaniForce 4150, 4" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, EO Diaphragms
Graco's SaniForce 4150, 4-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 90 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 4 inch sanitary pump with flow rates up to 90 gpm (340 lpm) and pressures up to 120 psi (8 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
- EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Flapper check enables passage of solids up to 3.8 in. (96.5 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 4150 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: 316 Stainless Steel Flapper
- Center Section Material: Stainless Steel
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: Tri-Clamp
- Diaphragm Material: EPDM Overmold
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food, Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Center Port Wye
- Manifold O-Ring Material: EPDM
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 2.1 (Standard)
- Maximum Air Consumption (SCFM): 235
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 225
- Maximum Flow Rate (GPM): 90
- Maximum Flow Rate (L/min): 340
- Maximum Fluid Operating Temperature (°C): 121
- Maximum Fluid Operating Temperature (°F): 250
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Fluid Operating Temperature (°C): 121
- Maximum Fluid Operating Temperature (°F): 250
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi)
$23,110.00
SANIFORCE AODD PUMP, 4150HS.PS01ASSAFL-SPEP21
GG SP4F.0008
GG SP4F.0008
SANIFORCE AODD PUMP, 4150HS.PS01ASSAFL-SPEP21
SaniForce 4150, 4" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, SP Diaphragms Graco's SaniForce 4150, 4-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 90 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership. Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials. 4 inch sanitary pump with flow rates up to 90 gpm (340 lpm) and pressures up to 120 psi (8 bar) Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves Externally serviceable air valves deliver leading efficiency and reduce downtime. Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process 316L stainless steel wetted section All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 Flapper check enables passage of solids up to 3.8 in. (96.5 mm) Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
$22,960.00
Saniforce Aodd Pump, 4150Hs.Psp1Assgfl-Psep21
GG SP4F.0054
GG SP4F.0054
SANIFORCE AODD PUMP, 4150HS.PSP1ASSGFL-PSEP21
Graco SP4F.0054 SaniForce 4150, 4" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, PS Diaphragms
Graco's SaniForce 4150, 4-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 90 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 4 inch sanitary pump with flow rates up to 90 gpm (340 lpm) and pressures up to 120 psi (8 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Flapper check enables passage of solids up to 3.8 in. (96.5 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 4150 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: 316 Stainless Steel Flapper
- Center Section Material: Stainless Steel
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: No Manifold
- Diaphragm Material: PTFE/Santoprene 2-Piece
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food, Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Dual Inlet/Outlet
- Manifold O-Ring Material: EPDM
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 2.1 (Standard)
- Maximum Air Consumption (SCFM): 235
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 225
- Maximum Flow Rate (GPM): 90
- Maximum Flow Rate (L/min): 340
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Solid Size (cm): 9.65
- Maximum Solid Size (in): 3.8
- Maximum Solid Size (mm): 96.5
- Minimum Fluid Operating Temperature (°C): -40
- Minimum Fluid Operating Temperature (°F): -40
$15,210.00
Saniforce Aodd Pump, 4150Hs.Ps01Assgfl-Bnbn21
GG SP4F.0072
GG SP4F.0072
SANIFORCE AODD PUMP, 4150HS.PS01ASSGFL-BNBN21
Graco SP4F.0072 SaniForce 4150, 4" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, BN Diaphragms
Graco's SaniForce 4150, 4-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 90 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 4 inch sanitary pump with flow rates up to 90 gpm (340 lpm) and pressures up to 120 psi (8 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Flapper check enables passage of solids up to 3.8 in. (96.5 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 4150 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: 316 Stainless Steel Flapper
- Center Section Material: Stainless Steel
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: No Manifold
- Diaphragm Material: Buna-N
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food and Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Dual Inlet/Outlet
- Manifold O-Ring Material: Buna
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 2.1 (Standard)
- Maximum Air Consumption (SCFM): 235
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 225
- Maximum Flow Rate (GPM): 90
- Maximum Flow Rate (L/min): 340
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Solid Size (cm): 9.65
- Maximum Solid Size (in): 3.8
- Maximum Solid Size (mm): 96.5
- Minimum Fluid Operating Temperature (°C): -12
- Minimum Fluid Operating Temperature (°F): 10
- Overall Heigh
$22,810.00
Saniforce Aodd Pump, 4150Hs.Ps01Assefl-Bnbn21
GG SP4F.0068
GG SP4F.0068
SANIFORCE AODD PUMP, 4150HS.PS01ASSEFL-BNBN21
Graco SP4F.0068 SaniForce 4150, 4" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, BN Diaphragms
Graco's SaniForce 4150, 4-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 90 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 4 inch sanitary pump with flow rates up to 90 gpm (340 lpm) and pressures up to 120 psi (8 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Flapper check enables passage of solids up to 3.8 in. (96.5 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 4150 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: 316 Stainless Steel Flapper
- Center Section Material: Stainless Steel
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: Tri-Clamp
- Diaphragm Material: Buna-N
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food and Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Center Port Wye
- Manifold O-Ring Material: Buna
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 2.1 (Standard)
- Maximum Air Consumption (SCFM): 235
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 225
- Maximum Flow Rate (GPM): 90
- Maximum Flow Rate (L/min): 340
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Solid Size (cm): 9.65
- Maximum Solid Size (in): 3.8
- Maximum Solid Size (mm): 96.5
$23,840.00
Repair Kit, Twnmxr, 1:1, Hf, P/V, P/V
GG SPK-1201-00
GG SPK-1201-00
Repair Kit, Twnmxr, 1:1, Hf, P/V, P/V
$515.00
Saniforce Aodd Pump, 4150Hs.Ps01Assafl-Bnbn21
GG SP4F.0060
GG SP4F.0060
SANIFORCE AODD PUMP, 4150HS.PS01ASSAFL-BNBN21
Graco SP4F.0060 SaniForce 4150, 4" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, BN Diaphragms
Graco's SaniForce 4150, 4-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 90 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 4 inch sanitary pump with flow rates up to 90 gpm (340 lpm) and pressures up to 120 psi (8 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Flapper check enables passage of solids up to 3.8 in. (96.5 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 4150 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: 316 Stainless Steel Flapper
- Center Section Material: Stainless Steel
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: Tri-Clamp
- Diaphragm Material: Buna-N
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food and Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Center Port
- Manifold O-Ring Material: Buna
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 2.1 (Standard)
- Maximum Air Consumption (SCFM): 235
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 225
- Maximum Flow Rate (GPM): 90
- Maximum Flow Rate (L/min): 340
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Solid Size (cm): 9.65
- Maximum Solid Size (in): 3.8
- Maximum Solid Size (mm): 96.5
- Min
$23,260.00
Saniforce Aodd Pump, 4150Hs.Ps01Assgfl-Poep21
GG SP4F.0052
GG SP4F.0052
SANIFORCE AODD PUMP, 4150HS.PS01ASSGFL-POEP21
Graco SP4F.0052 SaniForce 4150, 4" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, PO Diaphragms
Graco's SaniForce 4150, 4-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 90 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Application: Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.- 4 inch sanitary pump with flow rates up to 90 gpm (340 lpm) and pressures up to 120 psi (8 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- PTFE/EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Flapper check enables passage of solids up to 3.8 in. (96.5 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
- Model: SaniForce
- Series: 4150 HS
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Ball Material: 316 Stainless Steel Flapper
- Center Section Material: Stainless Steel
- Compatible Material: Edible Oil, Food, Personal Care
- Compressor Required: Yes
- Connection Type: No Manifold
- Diaphragm Material: PTFE/EPDM Overmold
- Fluid Section Material: 316L Stainless Steel
- For Use With: Food, Personal Care
- Hazardous Location Approval: ATEX, IECEx
- Manifold Configuration: Dual Inlet/Outlet
- Manifold O-Ring Material: EPDM
- Material: Stainless Steel
- Material Certification: EN 1024:2004 Type 2.1 (Standard)
- Maximum Air Consumption (SCFM): 235
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 225
- Maximum Flow Rate (GPM): 90
- Maximum Flow Rate (L/min): 340
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Fluid Operating Temperature (°C): 82
- Maximum Fluid Operating Temperature (°F): 180
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Solid Size (cm): 9.65
- Maximum Solid Size (in): 3.8
- Maximum Solid Size
$15,560.00
Check-Mate Pump, 55:1 6500/250 Cs Ml
GG P55LCM
GG P55LCM
Check-Mate Pump, 55:1 6500/250 Cs Ml
$20,710.00
Check-Mate Pump, 55:1 6500/250 Cs Sd
GG P55LCS
GG P55LCS
CHECK-MATE PUMP,55:1 6500/250 CS SD
Graco P55LCS 55:1 - 250cc Check-Mate Pump with NXT 6500 Air Motor, Severe Duty Carbon Steel Construction
Graco Supply Pumps reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials to metering and dispensing systems. Maximize your plant's production capacity.
Application: Long-lasting durability - Check-Mate pumps are a time-tested, proven performer- NXT 6500 Air Motor
- Low Noise
- Modular design for easier maintenance
- Rugged body armor won't rust or dent
- Highest technology air motor on the market
- 250cc Check-Mate Lower
- Severe Duty coatings on rods and cylinder Extends production time
- Xtreme Coupler - No tool connection
- Quick-disconnect coupler for easy maintenance
- Replaceable Seat
- Minimizes service costs
- Cast Outlet and Inlet Housing
- Improves structural integrity
- NEW Xtreme® Coupler
- Quick-disconnect coupler for easy maintenance
- Replaceable Outlet Fitting
- Reduces repair costs
- Piston Valve with Floating Piston Seal
- For maximum pressure balance over a range of material viscosities
- Replaceable Seat
- Minimizes service costs
- Floating Priming Plate
- Provides uniform flow
- Cast Outlet and Inlet Housing
- Improves structural integrity
- NEW Cartridge Throat Packings
- Allows for easy servicing without removing from ram
- Modular Air Valve
- De-icing controls
- Up to 50% quieter than previous models
- Modular air valve - eliminates stalling, easy-to-repair
- Hard Part Coatings
- Standard Severe Duty coating on rods and cylinder maximizes wear life
$18,030.00
Seal Kit, Pump, 50Ser, 1in, Tef/Sil
GG P6015-ASSY5SK
GG P6015-ASSY5SK
Seal Kit, Pump, 50Ser, 1In, Tef/Sil
$340.00
Check-Mate Pump, 55:1 6500/250 Ss Ml
GG P55LSM
GG P55LSM
Check-Mate Pump, 55:1 6500/250 Ss Ml
$30,030.00
Check-Mate Pump, 55:1 6500/250 Ss Sd
GG P55LSS
GG P55LSS
Check-Mate Pump, 55:1 6500/250 Ss Sd
$27,310.00
Check-Mate Pump, 61:1 1800/060 Cs Ml
GG P61LCM
GG P61LCM
Check-Mate Pump, 61:1 1800/060 Cs Ml
$10,390.00
CHECK-MATE PUMP, 63:1 3400/100
GG P63DCS
GG P63DCS
CHECK-MATE PUMP, 63:1 3400/100
NXT™ Check-Mate® Air-Powered 63:1 Grease Pump without DataTrakMove large amounts of grease fast! Proven Graco NXT technology gives you the best value for the money - fewer parts, faster repairs and long-lasting durability.
Intuitive, easy-to-use controls give you pump diagnostics to track material usage and plan for routine maintenance Long-lasting durability - Check-Mate pump is a time-tested, proven performer Reduces icing and noise - The NXT air motor is up to 50% quieter than previous models Integrated ram and pump control is easy to useNXT Air Motor
- Modular design for easier maintenance
- Rugged body armor won't rust or dent
- Highest technology air motor on the market
Integrated Air Controls
- Lockable easy-turn regulator
- Front-mounted for easy access
- Compact and modular
- Built-in filtration
Xtreme® Coupler
- Quick-disconnect coupler for easy maintenance
Replaceable Outlet Fitting
- Reduces repair costs
Piston Valve with Floating Piston Seal
- For maximum pressure balance over a range of material viscosities
Replaceable Seat
- Minimizes service costs
Floating Priming Plate
- Provides uniform flow
Cast Outlet and Inlet Housing
- Improves structural integrity
Unique Cartridge Throat Packings
- Allows for easy servicing without removing from ram
DataTrak™ Control
- Runaway protection
- Pump diagnostics
- Material tracking
Modular Air Valve
- De-icing controls
- Up to 50% quieter than previous models
- Modular air valve - eliminates stalling, easy-to-repair
Hard Part Coatings
- Standard Severe Duty™ coating on rods and cylinder maximizes wear life
$12,060.00
CHECK-MATE PUMP, 68:1 6500/200
GG P68DCS
GG P68DCS
CHECK-MATE PUMP, 68:1 6500/200
NXT™ Check-Mate® Air-Powered 68:1 Grease Pump without DataTrakMove large amounts of grease fast! Proven Graco NXT technology gives you the best value for the money - fewer parts, faster repairs and long-lasting durability.
Intuitive, easy-to-use controls give you pump diagnostics to track material usage and plan for routine maintenance Long-lasting durability - Check-Mate pump is a time-tested, proven performer Reduces icing and noise - The NXT air motor is up to 50% quieter than previous models Integrated ram and pump control is easy to useNXT Air Motor
- Modular design for easier maintenance
- Rugged body armor won't rust or dent
- Highest technology air motor on the market
Integrated Air Controls
- Lockable easy-turn regulator
- Front-mounted for easy access
- Compact and modular
- Built-in filtration
Xtreme® Coupler
- Quick-disconnect coupler for easy maintenance
Replaceable Outlet Fitting
- Reduces repair costs
Piston Valve with Floating Piston Seal
- For maximum pressure balance over a range of material viscosities
Replaceable Seat
- Minimizes service costs
Floating Priming Plate
- Provides uniform flow
Cast Outlet and Inlet Housing
- Improves structural integrity
Unique Cartridge Throat Packings
- Allows for easy servicing without removing from ram
DataTrak™ Control
- Runaway protection
- Pump diagnostics
- Material tracking
Modular Air Valve
- De-icing controls
- Up to 50% quieter than previous models
- Modular air valve - eliminates stalling, easy-to-repair
Hard Part Coatings
- Standard Severe Duty™ coating on rods and cylinder maximizes wear life
$19,100.00
Check-Mate Pump, 68:1 6500/200 Rm Cs Sd
GG P68RCS
GG P68RCS
Check-Mate Pump, 68:1 6500/200 Rm Cs Sd
$17,160.00
Check-Mate Pump, 68:1 6500/200 Rm Ss Sd
GG P68RSS
GG P68RSS
Check-Mate Pump, 68:1 6500/200 Rm Ss Sd
$26,320.00
Check-Mate Pump, 68:1 6500/200 Cs Ml
GG P68LCM
GG P68LCM
Check-Mate Pump, 68:1 6500/200 Cs Ml
$19,020.00
Seat Assembly, Needle, 710Sf, .040 Id
GG P6760-64
GG P6760-64
Seat Assy, Needle, 710Sf, .040 Id
$1,455.00