GRACO INC. S10595
GRACO INC. S10595 branded products
RAC 5 TIP, SPRAY
GG 286533
GG 286533
RAC 5 TIP, SPRAY
Graco 286533 RAC 5 SwitchTip, 533
The Reverse-A-Clean (RAC) 533 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.033 inch orifice. Reverse the SwitchTip to easily clear clogs.
- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Lacquer to Mastic, Latex Paint
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 30.5
- Maximum Fan Width (in): 10
- Maximum Fan Width (mm): 305
- Maximum Flow Rate (GPM): 1.17
- Maximum Flow Rate (L/min): 4.43
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 10
- Minimum Fan Width (mm): 254
- Orifice Diameter (in): 0.033
- Pattern Size (in): 10 to 12
- Pattern Size (mm): 254 to 304.8
$62.75
RAC 5 TIP, SPRAY
GG 286535
GG 286535
RAC 5 TIP, SPRAY
Graco 286535 RAC 5 SwitchTip, 535
The Reverse-A-Clean (RAC) 535 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.035 inch orifice. Reverse the SwitchTip to easily clear clogs.
- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Lacquer to Mastic, Latex Paint
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 30.5
- Maximum Fan Width (in): 10
- Maximum Fan Width (mm): 305
- Maximum Flow Rate (GPM): 1.31
- Maximum Flow Rate (L/min): 4.96
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 10
- Minimum Fan Width (mm): 254
- Orifice Diameter (in): 0.035
- Pattern Size (in): 10 to 12
- Pattern Size (mm): 254 to 304.8
$62.75
RAC 5 TIP, SPRAY
GG 286543
GG 286543
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 543 The Reverse-A-Clean (RAC) 543 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.043 inch orifice. Reverse the SwitchTip to easily clear clogs.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
$62.75
RAC 5 TIP, SPRAY
GG 286609
GG 286609
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 609 The Reverse-A-Clean (RAC) 609 RAC 5 SwitchTip produces a 12 to 14 inch fan and has a 0.009 inch orifice. Reverse the SwitchTip to easily clear clogs.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
$62.75
RAC 5 TIP, SPRAY
GG 286611
GG 286611
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 611 The Reverse-A-Clean (RAC) 611 RAC 5 SwitchTip produces a 12 to 14 inch fan and has a 0.011 inch orifice. Reverse the SwitchTip to easily clear clogs.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
$62.75
RAC 5 TIP, SPRAY
GG 286613
GG 286613
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 613 The Reverse-A-Clean (RAC) 613 RAC 5 SwitchTip produces a 12 to 14 inch fan and has a 0.013 inch orifice. Reverse the SwitchTip to easily clear clogs.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
$62.75
RAC 5 TIP, SPRAY
GG 286615
GG 286615
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 615 The Reverse-A-Clean (RAC) 615 RAC 5 SwitchTip produces a 12 to 14 inch fan and has a 0.015 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics. Most Widely Used Reversible Spray Tip on the Market (Black Handle)- Used for residential and commercial applications
- Includes OneSeal for most common coatings
- Large selection of tip sizes available
- Easy to identify laser stamped tip size
- Solvent seal available when using extremely hot solvents
$62.75
RAC 5 TIP, SPRAY
GG 286617
GG 286617
RAC 5 TIP, SPRAY
Graco 286617 RAC 5 SwitchTip, 617
The Reverse-A-Clean (RAC) 617 RAC 5 SwitchTip produces a 12 to 14 inch fan and has a 0.017 inch orifice. Reverse the SwitchTip to easily clear clogs.
Application: Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 35.6
- Maximum Fan Width (in): 12
- Maximum Fan Width (mm): 356
- Maximum Flow Rate (GPM): 0.31
- Maximum Flow Rate (L/min): 1.17
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 12
- Minimum Fan Width (mm): 305
- Orifice Diameter (in): 0.017
$62.75
RAC 5 TIP, SPRAY
GG 286817
GG 286817
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 817 The Reverse-A-Clean (RAC) 817 RAC 5 SwitchTip produces a 16 to 18 inch fan and has a 0.017 inch orifice. Reverse the SwitchTip to easily clear clogs.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
$62.75
RAC 5 TIP, SPRAY
GG 286935
GG 286935
RAC 5 TIP, SPRAY
Graco 286935 RAC 5 SwitchTip, 935
The Reverse-A-Clean (RAC) 935 RAC 5 SwitchTip produces an 18 to 20 inch (46 to 51 cm) fan and has a 0.035 inch orifice. Reverse the SwitchTip to easily clear clogs.
- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Lacquer to Mastic, Latex Paint
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 50.8
- Maximum Fan Width (in): 18
- Maximum Fan Width (mm): 508
- Maximum Flow Rate (GPM): 1.31
- Maximum Flow Rate (L/min): 4.96
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 18
- Minimum Fan Width (mm): 457
- Orifice Diameter (in): 0.035
- Pattern Size (in): 18 to 20
- Pattern Size (mm): 457.2 to 508
$62.75
RAC 5 TIP, SPRAY
GG 286815
GG 286815
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 815 The Reverse-A-Clean (RAC) 815 RAC 5 SwitchTip produces a 16 to 18 inch fan and has a 0.015 inch orifice. Reverse the SwitchTip to easily clear clogs.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
$62.75
EXTENSION, TIP, 30"
GG 287022
GG 287022
EXTENSION, TIP, 30"
RAC X Tip Extension, 30 in The 30 inch RAC X Tip Extension is ideal for hard-to-reach areas such as soffits, stairways, and vaulted ceilings. Includes RAC X HandTite Guard. Can be combined for extended reach up to 6 feet. Includes RAC X HandTite Guard standard with 7/8 inch gun nut and OneSeal Can be combined for extended reach up to 6 ft Ideal for hard-to-reach areas such as soffits, stairways, and vaulted ceilings Extend range and spray more efficiently without ladders or scaffolding Made from aluminum for a durable and lightweight design Extension lengths can be combined for extended reach up to 6 feet (1.82 meters) Includes RAC X HandTite Guard standard with 7/8 inch gun nut and OneSeal
$64.50
GUN, POLE, 3', DOMESTIC
GG 287023
GG 287023
GUN, POLE, 3', DOMESTIC
Graco 287023 Pole Gun, 3 ft
Extend your range and spray more efficiently without ladders or scaffolding with the 3 foot Pole Gun.
- Heavy-duty extensions are ideal for high-pressure spraying or pressure roller applications.
- Airless Tip Extensions can be attached directly to an airless gun making them ideal for spraying ceilings, overhangs and decks.
- CleanShot Valve can be attached directly to any extension and provides a clean fluid shutoff at the tip – no spitting.
- Model: Graco
- Series: Pole Gun
- Bleed Type: Bleeder
- Compatible Material: Water-Based Paint
- Component A Inlet Size (in): 1/4
- Component A Inlet Thread Type: NPSM
- Component Type: Single Component
- Fluid Orifice Size (cm): 0.229
- Fluid Orifice Size (in): 0.090
- Fluid Orifice Size (mm): 2.29
- For Use With: Electric Airless Sprayer
- Gun Activation: Manual
- Gun Type: Pole Gun
- Gun Weight (kg): 0.1253
- Gun Weight (lb): 2.76
- Includes: Cleanshot Shut-off Valve, Contractor In-line Valve
- Maximum Fluid Pressure (bar): 248
- Maximum Fluid Pressure (kPa): 24800
- Maximum Fluid Pressure (MPa): 24.8
- Maximum Fluid Pressure (psi): 3600
- Maximum Fluid Pressure (bar): 248
- Maximum Fluid Pressure (kPa): 24800
- Maximum Fluid Pressure (MPa): 24.8
- Maximum Fluid Pressure (psi): 3600
- Purge Method: Liquid
$514.00
RAC 5 TIP, SPRAY
GG 286723
GG 286723
RAC 5 TIP, SPRAY
Graco 286723 RAC 5 SwitchTip, 723
The Reverse-A-Clean (RAC) 723 RAC 5 SwitchTip produces a 14 to 16 inch fan and has a 0.023 inch orifice. Reverse the SwitchTip to easily clear clogs.
- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Lacquer to Mastic, Latex Paint
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 40.6
- Maximum Fan Width (in): 14
- Maximum Fan Width (mm): 406
- Maximum Flow Rate (GPM): 0.57
- Maximum Flow Rate (L/min): 2.16
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 14
- Minimum Fan Width (mm): 356
- Orifice Diameter (in): 0.023
- Pattern Size (in): 14 to 16
- Pattern Size (mm): 355.6 to 406.4
$62.75
RAC 5 TIP, SPRAY
GG 286621
GG 286621
RAC 5 TIP, SPRAY
Graco 286621 RAC 5 SwitchTip, 621
The Reverse-A-Clean (RAC) 621 RAC 5 SwitchTip produces a 12 to 14 inch fan and has a 0.021 inch orifice. Reverse the SwitchTip to easily clear clogs.
Application: Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 35.6
- Maximum Fan Width (in): 12
- Maximum Fan Width (mm): 356
- Maximum Flow Rate (GPM): 0.47
- Maximum Flow Rate (L/min): 1.78
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 12
- Minimum Fan Width (mm): 305
- Orifice Diameter (in): 0.021
$62.75
Valve, 316 SST Check
GG 24T894
GG 24T894
VALVE, CHECK, 316 SST
Graco 24T894 Check Valve, 316 Stainless Steel
- Compatible Material: Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC
$85.00
Kit, Soft Parts, 35Cc
GG 24T895
GG 24T895
KIT, SOFT PARTS, 35CC
Graco 24T895 35 cc Lower Seal Repair Kit for ProMix PD2K Electronic Positive Displacement Proportioning System Dosing Pumps, no tools included
$767.00
Kit, Soft Parts, 70Cc
GG 24T896
GG 24T896
KIT, SOFT PARTS, 70CC
Graco 24T896 70 cc Lower 24T793 Repair Kit for ProMix PD2K Electronic Positive Displacement Proportioning System Dosing Pumps
- Bleed Type: Non-Bleeder
- Compatible Material: Lacquer, Latex, Plural Component Materials, Polyurethane, Solventborne, Urethane, UV Coating, Varnish, Waterborne
$767.00
Kit, Sensor, Helical Meter
GG 24U114
GG 24U114
KIT,SENSOR,HELICAL METER
KIT INCLUDES: SENSOR, HELICAL METER [QTY. 1], KIT INCLUDES: HEATER, 240VAC, 200W, .5DIAX1.5LG [QTY. 1], FERRULE, WIRE, 18AWG, UNINSULATED [QTY. 2]
$1,475.00
AIRPRO GUN, STAINLESS, CONV Obsolete
GG 24U188
GG 24U188
AIRPRO GUN, STAINLESS, CONV
Graco 24U188 AirPro Air Spray Pressure Feed Gun, Conventional, 0.055 inch (1.4 mm) Nozzle, SST Tip, for General Metal Applications
The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.
- Even material distribution through the spray pattern for optimum coverage
- Improved transfer efficiency through reduced air consumption
- Enhanced atomization through material-specific aircaps
- Ultra-light trigger pull reduces operator muscle stress
- Ergonomic gun handle provides a comfortable grip
- Rounded control knobs for operator comfort
- Optimize spray performance with our cutting edge aircap and nozzle design
- Choose from a wide range of gun models to meet the needs of your specific application
- Model: AirPro
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPSM
- Application: Metal
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
- Feed Type: Pressure Feed
- Fluid Inlet Size (cm): 0.9525
- Fluid Inlet Size (in): 3/8
- Fluid Inlet Size (mm): 9.525
- Fluid Inlet Thread Type: NPSM
- Fluid Orifice Size (cm): 0.14
- Fluid Orifice Size (in): 0.055
- Fluid Orifice Size (mm): 1.4
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Conventional Gun
- Gun Weight (g): 410
- Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 21
- Maximum Fluid Pressure (kPa): 2100
- Maximum Fluid Pressure (MPa): 2.1
- Maximum Fluid Pressure (psi): 300
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Maximum Fluid Pressure (bar): 21
- Maximum Fluid Pressure (kPa): 2100
- Maximum Fluid Pressure (MPa): 2.1
- Maximum Fluid Pressure (psi): 300
- Maximum Fluid Temperature (°C): 43
- Maximum Fluid Temperature (°F): 109
- Product Type: Spray Gun
Call for pricing
KIT, 25' FLUID&AIR HOSE FP295
GG 24U578
GG 24U578
KIT, 25' FLUID&AIR HOSE FP295
Graco 24U578 Super-Flex Material and Air Hose Set, 25 ft
By increasing flexibility and maneuverability, Graco’s Super-Flex Hose Set enables you to work in tight confines and helps you increase the quality of finish you’re laying down.
- Super-Flex Fluid and Air Hose Set
The flexibility to get into tight spaces – focus on the task, not the tool!
Extremely lightweight in hand, which reduces fatigue
Connects directly to the gun for maximum flexibility
Flex Wrap hose skin protects from material buildup and increases hose durability
- Model: Super-Flex
- Series: Hose
- Hose Length (cm): 762
- Hose Length (ft): 25
- Hose Length (in): 300
- Hose Length (m): 7.6
- Hose Length (mm): 7600
- Maximum Working Pressure (bar): 227
- Maximum Working Pressure (kPa): 22700
- Maximum Working Pressure (MPa): 22.7
- Maximum Working Pressure (psi): 3300
$276.50
COVER, ROLLER, 9"X1/2", MAGNUM, 4PK
GG 24U668
GG 24U668
COVER, ROLLER, 9"X1/2", MAGNUM, 4PK
Roller Cover 1/2 in nap Graco Roller Covers are specially designed for use with high-pressure rolling applications. Use the ½ in nap for painting smooth surfaces with few flaws.
$17.50
Encoder Replacement Kit for E-Flo DC Motors
GG 24U938
GG 24U938
Encoder Replacement Kit for E-Flo DC Motors
$631.00
METER, PRESET, 60 QUART, NPT
GG 24U947
GG 24U947
METER, PRESET, 60 QUART, NPT
Graco 24U947 60 Quart Preset Meter - Bare Extension - NPT
Mechanical meters are ideal for indoor or outdoor use in all size shops, typically handling applications in automotive dealerships, fast lube centers, and service shops. The meter featured is fitted with a multiple nozzle and extension options and are capable of pumping oil up to 8 gpm (30.2 lpm).
Application: Typical applications include Automotive dealerships, Heavy-duty dealerships, Fast lube centers, Fleet service facilities, In-plant, Lube trucks, and Mining.- Preset meter automatically shuts-off flow when preset quantity has been dispensed
- Impact-resistant shroud resists against scratches and protects knob and dial from damage
- Dial and face design made simple, easy to read and set
- Built-in totalizer to manage material usage
- Inlet 1/2 in. NPT with swivel
- Measures fluid in quarts
- Bare meter without extension or nozzle
- 5 Year Warranty
- Compatible Material: Oil, Antifreeze
- Dispense Type: Preset
- Display Type: Mechanical
- Extension Type: Bare
- Inlet Size (cm): 1.27
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPT
- Maximum Flow Rate (GPM): 8
- Maximum Flow Rate (L/min): 30
- Maximum Operating Temperature (°C): 70
- Maximum Operating Temperature (°F): 160
- Maximum Working Pressure (bar): 103.4
- Maximum Working Pressure (kPa): 10340
- Maximum Working Pressure (MPa): 10
- Maximum Working Pressure (psi): 1500
- Meter Accuracy (%): ±1%
- Meter Pressure Loss (bar): 2
- Meter Pressure Loss (kPa): 200
- Meter Pressure Loss (psi): 30
- Metering Gun Weight (kg): 1.58
- Metering Gun Weight (lb): 3.5
- Minimum Operating Temperature (°C): -45
- Minimum Operating Temperature (°F): -50
- Nozzle Type: None
- Outlet Size (cm): 1.27
- Outlet Size (in): 0.75
- Outlet Size (mm): 12.7
- Outlet Thread Type: ORB
- Recommended Environment: Indoor, Outdoor
$797.00
METER, MANUAL, 4/16 QUART, NPT
GG 24U959
GG 24U959
METER, MANUAL, 4/16 QUART, NPT
Graco 24U959 4/16 Quart Manual Meter - Bare Extension - NPT
Mechanical meters are ideal for indoor or outdoor use in all size shops, typically handling applications in automotive dealerships, fast lube centers, and service shops. The meter featured is fitted with a multiple nozzle and extension options and are capable of pumping oil up to 8 gpm (30.2 lpm).
Application: Typical applications include Automotive dealerships, Heavy-duty dealerships, Fast lube centers, Fleet service facilities, In-plant, Lube trucks, and Mining.- Manual meter easily resettable to show amount of fluid dispensed.
- Impact-resistant shroud resists against scratches and protects knob and dial from damage
- Dial and face design made simple, easy to read and set
- Built-in totalizer to manage material usage
- Inlet 1/2 in. NPT with swivel
- Measures fluid in quarts
- Bare meter without extension or nozzle
- 5 Year Warranty
- Compatible Material: Oil, Antifreeze
- Dispense Type: Manual
- Display Type: Mechanical
- Extension Type: Bare
- Inlet Size (cm): 1.27
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPT
- Maximum Flow Rate (GPM): 8
- Maximum Flow Rate (L/min): 30
- Maximum Operating Temperature (°C): 70
- Maximum Operating Temperature (°F): 160
- Maximum Working Pressure (bar): 103.4
- Maximum Working Pressure (kPa): 10340
- Maximum Working Pressure (MPa): 10
- Maximum Working Pressure (psi): 1500
- Meter Accuracy (%): ±1%
- Meter Pressure Loss (bar): 2
- Meter Pressure Loss (kPa): 200
- Meter Pressure Loss (psi): 30
- Metering Gun Weight (kg): 1.55
- Metering Gun Weight (lb): 3.42
- Minimum Operating Temperature (°C): -45
- Minimum Operating Temperature (°F): -50
- Nozzle Type: None
- Outlet Size (cm): 1.27
- Outlet Size (in): 0.75
- Outlet Size (mm): 12.7
- Outlet Thread Type: ORB
- Recommended Environment: Indoor, Outdoor
$517.00
Transducer, I/P
GG 24V001
GG 24V001
TRANSDUCER, I/P
Graco 24V001 Back Pressure Regulator Controller Kit
- Channels: 6
$2,290.00
METER, PRESET, 60 QRT, RIG, NPT
GG 24V052
GG 24V052
METER, PRESET, 60 QRT, RIG, NPT
Graco 24V052 60 Quart Preset Meter - Includes Nozzle/Extension Kit - Short Rigid Extension - NPT
Mechanical meters are ideal for indoor or outdoor use in all size shops, typically handling applications in automotive dealerships, fast lube centers, and service shops. The meter featured is fitted with a multiple nozzle and extension options and are capable of pumping oil up to 8 gpm (30.2 lpm).
Application: Typical applications include Automotive dealerships, Heavy-duty dealerships, Fast lube centers, Fleet service facilities, In-plant, Lube trucks, and Mining.- Preset meter automatically shuts-off flow when preset quantity has been dispensed
- Impact-resistant shroud resists against scratches and protects knob and dial from damage
- Dial and face design made simple, easy to read and set
- Built-in totalizer to manage material usage
- Inlet 1/2 in. NPT with swivel
- Measures fluid in quarts
- Features short extension with oil nozzle
- 5 Year Warranty
- Compatible Material: Oil, Antifreeze
- Dispense Type: Preset
- Display Type: Mechanical
- Extension Type: Rigid
- Includes: Bare Meter, Nozzle Kit
- Inlet Size (cm): 1.27
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPT
- Maximum Flow Rate (GPM): 8
- Maximum Flow Rate (L/min): 30
- Maximum Operating Temperature (°C): 70
- Maximum Operating Temperature (°F): 160
- Maximum Working Pressure (bar): 103.4
- Maximum Working Pressure (kPa): 10340
- Maximum Working Pressure (MPa): 10
- Maximum Working Pressure (psi): 1500
- Meter Accuracy (%): ±1%
- Meter Pressure Loss (bar): 2
- Meter Pressure Loss (kPa): 200
- Meter Pressure Loss (psi): 30
- Metering Gun Weight (kg): 1.58
- Metering Gun Weight (lb): 3.5
- Minimum Operating Temperature (°C): -45
- Minimum Operating Temperature (°F): -50
- Nozzle Type: Manual
- Outlet Size (cm): 1.27
- Outlet Size (in): 0.75
- Outlet Size (mm): 12.7
- Outlet Thread Type: ORB
- Recommended Environment: Indoor, Outdoor
Call for pricing
METER, MANUAL, 4/16 QRT, FLEX, NPT
GG 24V034
GG 24V034
METER, MANUAL, 4/16 QRT, FLEX, NPT
4/16 Quart Manual Meter Package - Includes Nozzle/Extension Kit - Flexible Extension - NPTMechanical meters are ideal for indoor or outdoor use in all size shops, typically handling applications in automotive dealerships, fast lube centers, and service shops. The meter featured is fitted with a multiple nozzle and extension options and are capable of pumping oil up to 8 gpm (30.2 lpm).
Typical applications include Automotive dealerships, Heavy-duty dealerships, Fast lube centers, Fleet service facilities, In-plant, Lube trucks, and Mining. Manual meter easily resettable to show amount of fluid dispensed. Impact-resistant shroud resists against scratches and protects knob and dial from damage Dial and face design made simple, easy to read and set Durable aluminum cast housing is balanced and lightweight for a comfortable grip Built-in totalizer to manage material usage Inlet 1/2 in. NPT with swivel Measures fluid in quarts Features flexible extension with oil nozzle 5 Year Warranty
$565.00
METER, PRESET, 60 GAL, RIG, NPT
GG 24V055
GG 24V055
METER, PRESET, 60 GAL, RIG, NPT
Graco 24V055 60 Gallon Preset Meter - Includes Nozzle/Extension Kit - Short Rigid Extension - NPT
Mechanical meters are ideal for indoor or outdoor use in all size shops, typically handling applications in automotive dealerships, fast lube centers, and service shops. The meter featured is fitted with a multiple nozzle and extension options and are capable of pumping oil up to 8 gpm (30.2 lpm).
Application: Typical applications include Automotive dealerships, Heavy-duty dealerships, Fast lube centers, Fleet service facilities, In-plant, Lube trucks, and Mining.- Preset meter automatically shuts-off flow when preset quantity has been dispensed
- Impact-resistant shroud resists against scratches and protects knob and dial from damage
- Dial and face design made simple, easy to read and set
- Built-in totalizer to manage material usage
- Inlet 1/2 in. NPT with swivel
- Measures fluid in gallons
- Features short extension with oil nozzle
- 5 Year Warranty
- Compatible Material: Oil, Antifreeze
- Dispense Type: Preset
- Display Type: Mechanical
- Extension Type: Rigid
- Includes: Bare Meter, Nozzle Kit
- Inlet Size (cm): 1.27
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPT
- Maximum Flow Rate (GPM): 8
- Maximum Flow Rate (L/min): 30
- Maximum Operating Temperature (°C): 70
- Maximum Operating Temperature (°F): 160
- Maximum Working Pressure (bar): 103.4
- Maximum Working Pressure (kPa): 10340
- Maximum Working Pressure (MPa): 10
- Maximum Working Pressure (psi): 1500
- Meter Accuracy (%): ±1%
- Meter Pressure Loss (bar): 2
- Meter Pressure Loss (kPa): 200
- Meter Pressure Loss (psi): 30
- Metering Gun Weight (kg): 1.58
- Metering Gun Weight (lb): 3.5
- Minimum Operating Temperature (°C): -45
- Minimum Operating Temperature (°F): -50
- Nozzle Type: Manual
- Outlet Size (cm): 1.27
- Outlet Size (in): 0.75
- Outlet Size (mm): 12.7
- Outlet Thread Type: ORB
- Recommended Environment: Indoor, Outdoor
Call for pricing
METER, PRESET, 60 LIT, RIG, NPT
GG 24V058
GG 24V058
METER, PRESET, 60 LIT, RIG, NPT
Graco 24V058 60 Liter Preset Meter - Includes Nozzle/Extension Kit - Short Rigid Extension - NPT
Mechanical meters are ideal for indoor or outdoor use in all size shops, typically handling applications in automotive dealerships, fast lube centers, and service shops. The meter featured is fitted with a multiple nozzle and extension options and are capable of pumping oil up to 8 gpm (30.2 lpm).
Application: Typical applications include Automotive dealerships, Heavy-duty dealerships, Fast lube centers, Fleet service facilities, In-plant, Lube trucks, and Mining.- Preset meter automatically shuts-off flow when preset quantity has been dispensed
- Impact-resistant shroud resists against scratches and protects knob and dial from damage
- Dial and face design made simple, easy to read and set
- Built-in totalizer to manage material usage
- Inlet 1/2 in. NPT with swivel
- Measures fluid in liters
- Features short extension with oil nozzle
- 5 Year Warranty
- Compatible Material: Oil, Antifreeze
- Dispense Type: Preset
- Display Type: Mechanical
- Extension Type: Rigid
- Includes: Bare Meter, Nozzle Kit
- Inlet Size (cm): 1.27
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPT
- Maximum Flow Rate (GPM): 8
- Maximum Flow Rate (L/min): 30
- Maximum Operating Temperature (°C): 70
- Maximum Operating Temperature (°F): 160
- Maximum Working Pressure (bar): 103.4
- Maximum Working Pressure (kPa): 10340
- Maximum Working Pressure (MPa): 10
- Maximum Working Pressure (psi): 1500
- Meter Accuracy (%): ±1%
- Meter Pressure Loss (bar): 2
- Meter Pressure Loss (kPa): 200
- Meter Pressure Loss (psi): 30
- Metering Gun Weight (kg): 1.58
- Metering Gun Weight (lb): 3.5
- Minimum Operating Temperature (°C): -45
- Minimum Operating Temperature (°F): -50
- Nozzle Type: Manual
- Outlet Size (cm): 1.27
- Outlet Size (in): 0.75
- Outlet Size (mm): 12.7
- Outlet Thread Type: ORB
- Recommended Environment: Indoor, Outdoor
Call for pricing
KIT, DIAPHRAGM-J1 SP
GG 24V242
GG 24V242
KIT, DIAPHRAGM-J1 SP
Santoprene Diaphragm Kit for 2-inch Pump
$143.00
Plate, Follower, Mega, TOF200
GG 24V633
GG 24V633
PLATE,FOLLOWER,MEGA,TOF200
- Compatible Material: Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC
$22,330.00
Kit, Seal, Pump, Glass Filled
GG 24V753
GG 24V753
KIT, SEAL, PUMP, GLASS FILLED
KIT INCLUDES: WASHER, SEAL, BACK-UP [QTY. 1], PACKING, U-CUP [QTY. 2], WASHER, SCRAPER [QTY. 1], NUT, PACKING [QTY. 1], WASHER, ROD, SCRAPER [QTY. 1], PACKING, O-RING, PTFE [QTY. 1], LUBRICANT, TUBE, 1 OZ [QTY. 1]
$692.00
Kit, Seal, Pump, Carbon Filled
GG 24V752
GG 24V752
KIT, SEAL, PUMP, CARBON FILLED
KIT INCLUDES: WASHER, SEAL, BACK-UP [QTY. 1], PACKING, U-CUP [QTY. 2], WASHER, SCRAPER [QTY. 1], NUT, PACKING [QTY. 1], WASHER, ROD, SCRAPER [QTY. 1], PACKING, O-RING, PTFE [QTY. 1], LUBRICANT, TUBE, 1 OZ [QTY. 1]
$842.00
SD BLUE DEF SYSTEM, AODD, WALL, DISP, W/MTR
GG 24V677
GG 24V677
SD BLUE DEF SYSTEM, AODD, WALL, DISP, W/MTR
Graco 24V677 SD™ Blue Pump Tote Package - 5 ft (1.5 m) Suction Hose Length - Automatic Nozzle - SST Clamp Fittings
Graco&prime, s SD Series DEF solutions are built on versatility with a Husky 515 AODD pump delivering up to 15 gpm (57 lpm) and operating on as little as 30 to 50 psi (2.1 to 3.4 bar). Increasing productivity this powerful pneumatic design provides superior suction and lift in tanks, totes and drums. Whether a small garage or large dealership, Graco has a complete line of Diesel Exhaust Fluid (DEF) for every application, capable of higher outputs over longer runs.
Application: Typical applications include automotive and heavy-duty dealerships, mining, service and fast lube centers, fleet service facilities, in-plant, and lube trucks.- Modular air valve with a stall-free, low-pulsation design for smooth and rapid changeover to increase efficiency and minimize downtime
- Robust design with bolt-through fluid cover design to eliminate leaks and provide safety and reliability
- Rugged construction built to resist corrosion for reliable performance and long life
- Center and end porting options available
- Up to 15 ft (4.57 m) of suction lift provides installation flexibility
- 5 year warranty. See manufacturers website for details.
- Model: SD
- Application: Industrial
- Compatible Material: Diesel Exhaust Fluid
- Fluid Inlet Size (cm): 1.9050
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Size (mm): 19.05
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: BSPP
- Fluid Outlet Size (cm): 1.905
- Fluid Outlet Size (in): 3/4
- Fluid Outlet Size (mm): 19.05
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: BSPP
- For Use With: DEF
- Hose Length (ft): 5
- Includes: Air Operated Diaphragm Pump, Mounting Bracket, LD Automatic Nozzle with SST Spout, LD DEF Meter, Dispense Hose and 2 Clamps, Suction Hose and 2 Clamps, Air Safety Valve
- Inlet Size (cm): 1.905
- Inlet Size (in): 3/4
- Inlet Size (mm): 19.05
- Inlet Thread Gender: Female
- Inlet Thread Type: BSPP
- Maximum Air Pressure (bar): 4
- Maximum Air Pressure (kPa): 40
- Maximum Air Pressure (psi): 50
- Maximum Cycle Rate (CPM): 400
- Maximum Fluid Pressure (bar): 3.4
- Maximum Fluid Pressure (kPa): 34
- Maximum Fluid Pressure (MPa): 0.3
- Maximum Fluid Pressure (psi): 50
- Maximum Fluid Pressure (bar): 3.4
- Maximum Fluid Pressure (kPa): 34
- Maximum Fluid Pressure (MPa): 0.3
- Maximum Fluid Pressure (psi): 50
- Maximum Solid Size (cm): 0.2381
- Maximum Solid Size (in): 0.09375
- Maximum Solid Size (mm): 2.3813
- Mount Location: Tote Mount
$2,020.00
MERKUR M2K SPRAYER, AS, 3:1, CART
GG 24V870
GG 24V870
MERKUR M2K SPRAYER, AS, 3:1, CART
Graco 24V870 3:1 M2K Air Spray Mechanical Proportioner Package, cart mount, AirPro gun and standard mix manifold
Upgrade from hand mixing to the efficient M2K mechanical sprayer. M2K Air Spray is ideal for low-pressure applications where a high quality finish is required.
- Increase mix material accuracy to improve finish quality and reduce material waste, compared to hand mixing
- Compact size makes it faster and easier to flush, saving you time and disposal costs
- Ideal for lower volume two component epoxy, polyurethane and polyester materials
- Model: M2K
- Component Type: Two Component
- Fluid Hose Inside Diameter (in): 0.25
- Fluid to Air Ratio: 4:1
- Gun Activation: Manual
- Includes: AirPro Gun, Standard Mix Manifold
- Material Type: Two Component
- Maximum Air Pressure (bar): 5
- Maximum Air Pressure (kPa): 50
- Maximum Air Pressure (psi): 65
- Maximum Flow Rate (GPM): 0.5
- Maximum Flow Rate (L/min): 2.0
- Maximum Hose Length (ft): 25
- Maximum Hose Length (m): 7.5
- Maximum Number of Colors: 1
- Maximum Working Pressure (bar): 15
- Maximum Working Pressure (kPa): 1500
- Maximum Working Pressure (psi): 225
- Mix Ratio: 3:1
- Mount Type: Cart Mount
- Number of Color Valves: N/A
- Proportioner Type: Mechanical
- Proportioning Type: Manual Mechanical
- Pump Lower A Size (cc): 75
- Pump Lower B Size (cc): 25
$17,730.00
MERKUR M2K SPRAYER, AA, 4:1, CART
GG 24V883
GG 24V883
MERKUR M2K SPRAYER, AA, 4:1, CART
Graco 24V883 4:1 M2K Air Assisted Mechanical Proportioner Package, cart mount, PerformAA 50 gun and standard mix manifold
Upgrade from hand mixing to the efficient M2K mechanical sprayer. M2K Air-Assist is for low to high fluid viscosity and maximum fluid pressure of 3000 psi (206 bar).
- Increase mix material accuracy to improve finish quality and reduce material waste, compared to hand mixing
- Compact size makes it faster and easier to flush, saving you time and disposal costs
- Ideal for lower volume two component epoxy, polyurethane and polyester materials
- Model: M2K
- Component Type: Two Component
- Fluid Hose Inside Diameter (in): 0.19
- Fluid to Air Ratio: 29:1
- Gun Activation: Manual
- Includes: G40 Gun, Standard Mix Manifold
- Material Type: Two Component
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 70
- Maximum Air Pressure (psi): 100
- Maximum Flow Rate (GPM): 0.7
- Maximum Hose Length (ft): 25
- Maximum Hose Length (m): 7.6
- Maximum Number of Colors: 1
- Maximum Working Pressure (bar): 207
- Maximum Working Pressure (kPa): 20700
- Maximum Working Pressure (MPa): 20.7
- Maximum Working Pressure (psi): 3000
- Mix Ratio: 4:1
- Mount Type: Cart Mount
- Number of Color Valves: N/A
- Proportioner Type: Mechanical
- Proportioning Type: Manual Mechanical
- Pump Lower A Size (cc): 100
- Pump Lower B Size (cc): 25
$18,830.00
MERKUR M2K SPRAYER, AL, 4:1, WALL
GG 24V902
GG 24V902
MERKUR M2K SPRAYER, AL, 4:1, WALL
Graco 24V902 4:1 M2K Airless Mechanical Proportioner, wall mount, and standard mix manifold
Upgrade from hand mixing to the efficient M2K mechanical sprayer. M2K Airless is ideal for quickly applying high
volumes of protective coatings to large surfaces.
- Increase mix material accuracy to improve finish quality and reduce material waste, compared to hand mixing
- Compact size makes it faster and easier to flush, saving you time and disposal costs
- Ideal for lower volume two component epoxy, polyurethane and polyester materials
- Model: M2K
- Component Type: Two Component
- Fluid to Air Ratio: 29:1
- Gun Activation: Manual
- Includes: Standard Mix Manifold
- Material Type: Two Component
- Maximum Flow Rate (GPM): 0.7
- Maximum Flow Rate (L/min): 2.65
- Maximum Number of Colors: 1
- Maximum Working Pressure (bar): 204
- Maximum Working Pressure (kPa): 20400
- Maximum Working Pressure (MPa): 20.4
- Maximum Working Pressure (psi): 3000
- Mix Ratio: 4:1
- Number of Color Valves: N/A
- Proportioner Type: Mechanical
- Proportioning Type: Manual Mechanical
- Pump Lower A Size (cc): 100
- Pump Lower B Size (cc): 25
$16,780.00
MERKUR M2K SPRAYER, AS, 4:1, CART
GG 24V871
GG 24V871
MERKUR M2K SPRAYER, AS, 4:1, CART
Graco 24V871 4:1 M2K Air Spray Mechanical Proportioner Package, cart mount, AirPro gun and standard mix manifold
Upgrade from hand mixing to the efficient M2K mechanical sprayer. M2K Air Spray is ideal for low-pressure applications where a high quality finish is required.
- Increase mix material accuracy to improve finish quality and reduce material waste, compared to hand mixing
- Compact size makes it faster and easier to flush, saving you time and disposal costs
- Ideal for lower volume two component epoxy, polyurethane and polyester materials
- Component Type: Two Component
- Fluid Hose Inside Diameter (in): 0.25
- Fluid to Air Ratio: 3.2:1
- Gun Activation: Manual
- Includes: AirPro Gun, Standard Mix Manifold
- Material Type: Two Component
- Maximum Air Pressure (bar): 5
- Maximum Air Pressure (kPa): 50
- Maximum Air Pressure (psi): 75
- Maximum Flow Rate (GPM): 0.7
- Maximum Flow Rate (L/min): 2.5
- Maximum Hose Length (ft): 25
- Maximum Hose Length (m): 7.5
- Maximum Number of Colors: 1
- Maximum Working Pressure (bar): 15
- Maximum Working Pressure (kPa): 1500
- Maximum Working Pressure (psi): 225
- Mix Ratio: 4:1
- Mount Type: Cart Mount
- Number of Color Valves: N/A
- Proportioner Type: Mechanical
- Proportioning Type: Manual Mechanical
- Pump Lower A Size (cc): 100
- Pump Lower B Size (cc): 25
$18,860.00
Kit, Manifold, Mix, Remote
GG 24V436
GG 24V436
KIT, MANIFOLD, MIX, REMOTE
Graco 24V436 Remote Mix Manifold for PD2K & PD3K
$2,910.00
Repair Kit, AWB
GG 24V816
GG 24V816
KIT,REPAIR, AWB
Graco 24V816 Awb Repair Kit
KIT INCLUDES: MODULE, GCA, AWB [QTY. 1], FLASH DRIVE, USB, 2.0 [QTY. 1]
- Compatible Material: Solventborne, High Solids, Xirallic, CARC, Metallics
$1,430.00
Kit, Repair, MZLP w/Fuses
GG 24V510
GG 24V510
Kit, Repair, MZLP w/Fuses
MZLP Repair Kit with Fuses KIT INCLUDES: MODULE, GCA, MZLP [QTY. 1 ]; LABEL, IDENTIFICATION [QTY. 1 ]; SOFTWARE, GCA, MZLP, APP [QTY. 1 ]; FLASH DRIVE, USB, 2.0 [QTY. 1 ]
$1,805.00
LD SYSTEM, DEFTOTE, 12V, W/MTR & AUTONOZ
GG 24V646
GG 24V646
LD SYSTEM, DEFTOTE, 12V, W/MTR & AUTONOZ
Graco 24V646 LD Blue Electric Pump Package - 5 ft (1.5 m) Suction Hose Length - Manual Nozzle - SST Clamp Fittings
Graco&prime, s LD Series DEF solutions offer long-lasting efficiency in a compact, high-performance electric pump package capable of pumping up to 9 gpm (34 lpm). Whether a small garage, large dealership, or heavy equipment maintenance facility, Graco has a complete line of Diesel Exhaust Fluid (DEF) products for every application. Our electric, pneumatic, or manual products are engineered specifically for the advanced needs of DEF fluid and are designed to minimize downtime and dispense materials quickly without compromising chemical integrity.
Application: Typical applications include automotive and heavy-duty dealerships, agriculture, service and fast lube centers, and fleet service facilities.- Reduces maintenance featuring a self-priming membrane pump
- Stays running longer, reducing downtime and getting more work done with the LD Blue Systems- up to twice the life of competitive pumps.
- Built-in safety and reliability with an automatic shut off timer (6.5min) incorporated into 120V pumps.
- 2 Year Warranty. See manufacturers website for details.
- Model: LD
- Series: Blue
- Application: Industrial
- Compatible Material: Diesel Exhaust Fluid
- Fluid Inlet Size (cm): 2.5400
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4
- Fluid Outlet Size (in): NPT
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: BSP
- For Use With: DEF
- Includes: 12 V Electric Pump, Stainless Steel Bracket with Nozzle Holder, LD Automatic Nozzle with SST Spout, LD DEF Meter, Elbow Fitting, Dispense Hose and 2 Clamps, Suction Hose and 2 Clamps
- Maximum Fluid Pressure (bar): 3.5
- Maximum Fluid Pressure (kPa): 35
- Maximum Fluid Pressure (MPa): 0.35
- Maximum Fluid Pressure (psi): 50
- Maximum Fluid Pressure (bar): 3.5
- Maximum Fluid Pressure (kPa): 35
- Maximum Fluid Pressure (MPa): 0.35
- Maximum Fluid Pressure (psi): 50
$1,720.00
ELEVATOR, SANITARY, MOBILE, 6:1
GG 24V312
GG 24V312
ELEVATOR, SANITARY, MOBILE, 6:1
Graco 24V312 6:1 Ratio SaniForce Elevator with Cart & Handle
Still using hoists and chains to unload your drums or bins? Graco&prime, s SaniForce Elevator is ideal for small to medium size food and personal care companies who currently unload less than 2 containers per hour. Use with Graco&prime, s SaniForce 2:1, 5:1 or 6:1 Piston Pumps to transfer small batches of low to medium viscosity fluids.
Application: Ideal for small to medium size companies who currently unload containers by scooping or using chains/hoists- FDA-compliant
- Use in sanitary applications to transfer low to medium viscosity fluids
- Designed to lower pumps into and lift pumps out of drums, bins and totes
- Mobile and stationary options available
- Model: SaniForce
- Air Inlet Size (in): 0.5
- Air Inlet Size (mm): 12.7
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Compatible Material: Food, Personal Care
- For Use With: Food, Personal Care, Pharmaceutical
- Includes: Cart and Handle
- Material: Stainless Steel
- Maximum Air Inlet Pressure (bar): 6.9
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Continuous Cycle Rate (CPM): 60
- Maximum Intermittent Cycle Rate (CPM): 60
- Maximum Working Pressure (bar): 41
- Maximum Working Pressure (kPa): 4100
- Maximum Working Pressure (MPa): 4.1
- Maximum Working Pressure (psi): 600
- Portable: Portable
- Pump Ratio: 6:1
$35,160.00
KIT, ACCY, JETROLLER, 18", W/ C/S
GG 24W128
GG 24W128
KIT, ACCY, JETROLLER, 18", W/ C/S
JetRoller Attachment, 18 in (46 cm) Finish Your Jobs 4X Faster. The JetRoller combines rolling and spraying into one action to minimize overspray and deliver a perfect finish with the speed, flexibility and comfort of airless spraying. The JetRoller will become THE best timesaving tool in your painting arsenal. A better way to achieve a perfect rolled finish. Save time & money on spray/back roll jobs while eliminating messy roller trays or lugging heavy buckets with cumbersome paint screens and grids. Uses standard 18 in (46 cm) roller covers (sold separately). 2-in-1 Spray & Rolling System- Back rolling & spraying in one pass
- Use as a spray extension or hand roller separately
- Reduce prep and cleanup time on every job
$932.00
Kit, Lower, Tof200, Cf
GG 24W150
GG 24W150
KIT,LOWER,TOF200,CF
KIT INCLUDES: PUMP, TOF200, LONG SHAFT, CF [QTY. 1], KIT INCLUDES: PUMP, TOF200, LONG SHAFT, GF [QTY. 1],
$11,510.00
Kit, Lower, Tof200, Gf
GG 24W151
GG 24W151
KIT, LOWER, TOF200, GF
KIT INCLUDES: PUMP, TOF200, LONG SHAFT, GF [QTY. 1], KIT INCLUDES: PUMP, TOF20, LONG SHAFT, CF [QTY. 1],
$11,330.00
ENDURA-FLO PUMP, 4:1 AODD, 150, TRI, STD
GG 24W345
GG 24W345
ENDURA-FLO PUMP, 4:1 AODD, 150, TRI, STD
Endura-Flo 4D150, 4:1 Air Operated Diaphragm Pump, 150cc, Tri-Clamp The Endura-Flo 4D offers the industry’s highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money. Endure-Flo diaphragms last longer against extreme operating conditions Easy access to critical components for fast online maintenance Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money Minimal solvent to flush and consistent startup pressure make it perfect for multiple color change and piggable systems Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges
$6,800.00
GT 750 PUMP, GREASE, 36:1, 400 LB
GG 24W337
GG 24W337
GT 750 PUMP, GREASE, 36:1, 400 LB
Graco 24W337 GT 750 36:1 Grease Transfer Pump for 400 lb (180 kg). Pail with Bung Adapter - NPT
The GT 750 pump was engineered to perform in challenging applications and changing environments. The large 7.5-inch (190 mm) air motor and pump lower combination allows the GT 750 pump to move the same amount of grease with up to four times fewer pump strokes.
- Efficient Air Motor -Use less air to move more grease.
- High Flow Rates - Up to 32 lb/min (13.6 kg/min) of grease.
- High Volume Per Stroke - Pump more grease without having to drive pump too quickly to damage seals.
- Multiple Tank Options - Available in 35, 120 and 400 lb (16, 54 and 181 kg) down tube lengths.
- Model: GT 750
- Air Inlet Size (in): 0.5
- Air Inlet Size (mm): 12.7
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Air Motor Effective Diameter (in): 7.5
- Application: Grease
- Compatible Material: Grease
- Fluid Inlet Thread Type: NPT
- Fluid Inlet Type: NPT
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- For Use With: Grease up to NLGI 2
- Includes: 2 Inch Bung Adapter and Lift Ring, 400 lb (181 kg) Lower
- Maximum Air Consumption (SCFM): 130
- Maximum Air Inlet Pressure (bar): 6.9
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Continuous Cycle Rate (CPM): 60
- Maximum Working Pressure (bar): 248.2
- Maximum Working Pressure (kPa): 24820
- Maximum Working Pressure (MPa): 24.8
- Maximum Working Pressure (psi): 3600
- Output Per Cycle (cm³): 180
- Pump Ratio: 36:1
$7,870.00
ENDURA-FLO PUMP, 4:1 AODD, 150, NPT, STD
GG 24W346
GG 24W346
ENDURA-FLO PUMP, 4:1 AODD, 150, NPT, STD
Endura-Flo 4D150, 4:1 Air Operated Diaphragm Pump, 150cc, NPT The Endura-Flo 4D offers the industry’s highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money. Endure-Flo diaphragms last longer against extreme operating conditions Easy access to critical components for fast online maintenance Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money Minimal solvent to flush and consistent startup pressure make it perfect for multiple color change and piggable systems Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges
$6,730.00
ENDURA-FLO PUMP, 4:1 AODD, 150, BSP, STD
GG 24W347
GG 24W347
ENDURA-FLO PUMP, 4:1 AODD, 150, BSP, STD
Endura-Flo 4D150, 4:1 Air Operated Diaphragm Pump, 150cc, BSPP The Endura-Flo 4D offers the industry’s highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money. Endure-Flo diaphragms last longer against extreme operating conditions Easy access to critical components for fast online maintenance Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money Minimal solvent to flush and consistent startup pressure make it perfect for multiple color change and piggable systems Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges
$6,730.00
ENDURA-FLO PUMP, 4:1 AODD, 150, TRI, ADV
GG 24W348
GG 24W348
ENDURA-FLO PUMP, 4:1 AODD, 150, TRI, ADV
Endura-Flo 4D150, 4:1 Air Operated Diaphragm Pump, 150cc, Tri-Clamp, DataTrak The Endura-Flo 4D offers the industry’s highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money. Endure-Flo diaphragms last longer against extreme operating conditions Easy access to critical components for fast online maintenance Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money Minimal solvent to flush and consistent startup pressure make it perfect for multiple color change and piggable systems Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges DataTrek option prevents runaway and tracks material usage
$8,360.00
ENDURA-FLO PUMP, 4:1 AODD, 150, NPT, ADV
GG 24W349
GG 24W349
ENDURA-FLO PUMP, 4:1 AODD, 150, NPT, ADV
Endura-Flo 4D150, 4:1 Air Operated Diaphragm Pump, 150cc, NPT, DataTrak The Endura-Flo 4D offers the industry’s highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money. Endure-Flo diaphragms last longer against extreme operating conditions Easy access to critical components for fast online maintenance Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money Minimal solvent to flush and consistent startup pressure make it perfect for multiple color change and piggable systems Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges DataTrek option prevents runaway and tracks material usage
$8,460.00
ENDURA-FLO PUMP, 4:1 AODD, 350, TRI, STD
GG 24W351
GG 24W351
ENDURA-FLO PUMP, 4:1 AODD, 350, TRI, STD
Endura-Flo 4D350, 4:1 Air Operated Diaphragm Pump, 350cc, Tri-Clamp The Endura-Flo 4D offers the industry’s highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money. Endure-Flo diaphragms last longer against extreme operating conditions Easy access to critical components for fast online maintenance Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money Minimal solvent to flush and consistent startup pressure make it perfect for multiple color change and piggable systems Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges
$11,390.00
ENDURA-FLO PUMP, 4:1 AODD, 350, BSP, STD
GG 24W353
GG 24W353
ENDURA-FLO PUMP, 4:1 AODD, 350, BSP, STD
Graco 24W353 Endura-Flo 4D350, 4:1 Air Operated Diaphragm Pump, 350cc, BSPP
The Endura-Flo 4D offers the industry’s highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money.
- Endure-Flo diaphragms last longer against extreme operating conditions
- Easy access to critical components for fast online maintenance
- Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money
- Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges
- Model: Endura-Flo
- Series: 4D350
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Circulation
- Compatible Material: High Solids, Xirallic, CARC, Metallics, Stains, Varnish, Fast-Set
- Connection Type: Threaded
- Fluid Inlet Size (cm): 1.905
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Size (mm): 19.05
- Fluid Inlet Thread Type: BSPP
- Fluid Outlet Size (cm): 1.905
- Fluid Outlet Size (in): 3/4
- Fluid Outlet Size (mm): 19.05
- Fluid Outlet Thread Type: BSPP
- Includes: BSPP Fittings
- Material: Stainless Steel
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Cycle Rate (CPM): 20
- Maximum Flow Rate (GPM): 5.5
- Maximum Flow Rate (L/min): 20.8
- Maximum Fluid Pressure (bar): 28
- Maximum Fluid Pressure (kPa): 2800
- Maximum Fluid Pressure (MPa): 2.8
- Maximum Fluid Pressure (psi): 400
- Maximum Fluid Pressure (bar): 28
- Maximum Fluid Pressure (kPa): 2800
- Maximum Fluid Pressure (MPa): 2.8
- Maximum Fluid Pressure (psi): 400
- Maximum Operating Temperature (°C): 50
- Maximum Operating Temperature (°F): 122
- Minimum Operating Temperature (°C): 0
- Minimum Operating Temperature (°F): 32
- Overall Height (in): 14.39
- Power Source: Air
- Pump Ratio: 4:1
$11,390.00
ENDURA-FLO PUMP, 4:1 AODD, 350, TRI, ADV
GG 24W354
GG 24W354
ENDURA-FLO PUMP, 4:1 AODD, 350, TRI, ADV
Graco 24W354 Endura-Flo 4D350, 4:1 Air Operated Diaphragm Pump, 350cc, Tri-Clamp, DataTrak
The Endura-Flo 4D offers the industry’s highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money.
- Endure-Flo diaphragms last longer against extreme operating conditions
- Easy access to critical components for fast online maintenance
- Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money
- Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges
- DataTrek option prevents runaway and tracks material usage
- Model: Endura-Flo
- Series: 4D350
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Circulation
- Compatible Material: High Solids, Xirallic, CARC, Metallics, Stains, Varnish, Fast-Set
- Connection Type: Tri-Clamp
- Fluid Inlet Size (cm): 2.54
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4
- Fluid Outlet Size (cm): 2.54
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Includes: Tri-Clamp Fittings, DataTrak
- Material: Stainless Steel
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Cycle Rate (CPM): 20
- Maximum Flow Rate (GPM): 5.5
- Maximum Flow Rate (L/min): 20.8
- Maximum Fluid Pressure (bar): 28
- Maximum Fluid Pressure (kPa): 2800
- Maximum Fluid Pressure (MPa): 2.8
- Maximum Fluid Pressure (psi): 400
- Maximum Fluid Pressure (bar): 28
- Maximum Fluid Pressure (kPa): 2800
- Maximum Fluid Pressure (MPa): 2.8
- Maximum Fluid Pressure (psi): 400
- Maximum Operating Temperature (°C): 50
- Maximum Operating Temperature (°F): 122
- Minimum Operating Temperature (°C): 0
- Minimum Operating Temperature (°F): 32
- Power Source: Air
- Pump Ratio: 4:1
$12,660.00
ENDURA-FLO PUMP, 4:1 AODD, 350, NPT, ADV
GG 24W355
GG 24W355
ENDURA-FLO PUMP, 4:1 AODD, 350, NPT, ADV
Endura-Flo 4D350, 4:1 Air Operated Diaphragm Pump, 350cc, NPT, DataTrak The Endura-Flo 4D offers the industry’s highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money. Endure-Flo diaphragms last longer against extreme operating conditions Easy access to critical components for fast online maintenance Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money Minimal solvent to flush and consistent startup pressure make it perfect for multiple color change and piggable systems Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges DataTrek option prevents runaway and tracks material usage
$11,860.00
HYDRA-CLEAN SYSTEM, AIR, 30:1, CART
GG 24W473
GG 24W473
HYDRA-CLEAN SYSTEM, AIR, 30:1, CART
Graco 24W473 Hydra-Clean® 30:1 Cart Mount Pneumatic Pressure Washer Package with Hose Reel
Clean up your facility the quick, easy and efficient way with Graco Hydra-Clean pressure washers! Designed with Graco’s NXT air motor, it&prime, s ideal for industrial and sanitary applications including food processing facilities, heavy duty cleaning, maintenance, shipyards, oil rigs and more.
Application: Ideal for heavy duty cleaning and maintenance for industrial and sanitary applications- Great for high pressure cleaning and sanitizing
- Fits most pressure, flow and material requirements
- Use with open-head universal drums
- Spray down portability for use in sanitary applications
- Supports multiple guns
- Efficient cleaning with water, detergent or chemical solutions
- Model: Hydra-Clean
- Air Inlet Size (cm): 1.905
- Air Inlet Size (in): 3/4
- Air Inlet Size (mm): 19.05
- Air Inlet Thread Type: NPT
- Includes: Hose Reel
- Maximum Flow Rate (GPM): 7
- Maximum Flow Rate (L/min): 26
- Maximum Fluid Flow Rate @ 60 CPM (GPM): 6.8
- Maximum Fluid Flow Rate @ 60 CPM (L/min): 25.9
- Maximum Fluid Flow Rate @ 60 CPM (GPM): 6.8
- Maximum Fluid Flow Rate @ 60 CPM (L/min): 25.9
- Maximum Working Pressure (bar): 211
- Maximum Working Pressure (kPa): 21130
- Maximum Working Pressure (MPa): 21.1
- Maximum Working Pressure (psi): 3065
- Motor Series: NXT Air Motor
- Mount Location: Cart Mount w/ Hose Reel
- Mount Type: Cart Mount w/ Hose Reel
- Power Type: Pneumatic
- Pump Ratio: 30:1
- Pump Type: Dura-Flo 1800 Pump
$27,120.00
GT 750 PUMP, GREASE, 36:1, STUBBY
GG 24W498
GG 24W498
GT 750 PUMP, GREASE, 36:1, STUBBY
GT 750 36:1 Universal Grease Transfer Pump with Bung Adapter- NPTThe GT 750 pump was engineered to perform in challenging applications and changing environments. The large 7.5-inch (190 mm) air motor and pump lower combination allows the GT 750 pump to move the same amount of grease with up to four times fewer pump strokes.
Efficient Air Motor - Use less air to move more grease.
High Flow Rates - Up to 32 lb/min (13.6 kg/min) of grease.
High Volume Per Stroke - Pump more grease without having to drive pump too quickly to damage seals.
Proven Pump Technology - Based on Graco NXT™ pump technology.
Multiple Tank Options - Available in 35, 120 and 400 lb (16, 54 and 181 kg) down tube lengths.
$8,620.00