GRACO INC. S10595

GG 197586

GG 197588

GG 198443

GG 19916-00

GG 19F710

ULTRA SPRAYER, 795 XT, STD, NA

Graco 19F710 Ultra 795 XT Standard Series Electric Airless Sprayer, Hi-Boy

The Ultra 795 XT Standard Series delivers an airless spray experience like no other. Featuring a 2.3 HP Xtreme Torque motor, Next Generation Rapid-Response Pressure Control, and the longest life pump in its class, the Ultra 795 XT Standard is sure to change the way you spray.

• Xtreme Torque Motor Technology
  • 15X more torque than traditional motors
  • 8X more magnets provide unmatched power and performance
  • 90% lower running speeds extend motors life
  • Up to 10X quieter
• Rapid-Response Pressure Control
  • Instantly responds to deliver the best finish quality
  • More performance across its full tip size range
  • Industry's largest operating pressure range (50-3,300 psi)
• Selectable Performance Modes
  • Two selectable spray modes offer unique performance levels to boost efficiency on every job
  • Bring on the savings and achieve Xtreme Control with Low Pressure Mode (50 - 2,000 psi)
  • Use High Pressure Mode for Xtreme Performance (500 - 3,300 psi)
• Endurance Vortex Piston Pump with ProConnect
  • Endurance Vortex Rod lasts 3X longer than the closest competitor
  • ProConnect Pump Removal for fast on-the-job service
  • 25% longer pump stroke for longer life before repacking
• TurboClean Cleaning System
  • Industry's fastest pump cleaning system
  • Delivers 3X faster cleaning with 1/2 the water
  • Convenient location
• WatchDog Pump Protection
  • Prevents damage by shutting off pump when it's time to refill
• Durable Filtration
  • Easy Out Filter provides easy maintenance and less clogging
• Upgrades with Modular Accessories
  • QuickReel hose management
  • SmartDisplay XT compatible with BlueLink
  • Endurance Vortex MAXLIFE EXTREME Pump
  • CrushProof Inlet Strainer
  • Rugged FlatProof tires
• Gun, Hose and Tip Included
  • Contractor PC Gun & RAC X LP 517 SwitchTip

• Model: Ultra
• Series: 795 XT
• Product Series: Standard

• Frame Configuration: Hi-Boy

• Maximum Flow Rate (GPM): 1.2

• Maximum Tip Size (in): .033

• Maximum Working Pressure (psi): 3300

• Minimum Working Pressure (psi): 50

GG 19C726

SOLOTECH ST25 PUMP, H25-MPM-FG-SS-A1-A1-0

Graco 19C726 SoloTech h25 Peristaltic Pump, 1 hp BLDC motor with gear reducer, .142-5.22 gpm, FDA Nitrile Hose, SST Sanitary Clamp Barb

With only the hose in contact with the fluid being pumped and no check valves in line, Graco's SoloTech peristaltic pumps are ideal for materials other pumps can't handle.

• Single Roller Design
  • The single roller compresses an engineered hose through a full 360 degrees of rotation. This reduces compressions, temperature, and friction, improving hose life.
• Hose Design
  • SoloTech customers routinely experience fewer failures and perform much less maintenance compared to other pump technology.
• Hose Barb Assembly
  • Easy to install or remove - no special tools needed
  • 316 SST sanitary clamp design for easy cleaning
• Pump Construction
  • Powder-coated aluminum housing reduces pump weight
  • Improved mounting flexibility with adjustable feet
• Pumps are reversible and can be used to empty lines or clear blockages

• Model: SoloTech
• Series: h25

• Barb Material: 316 Stainless Steel

• Gear Ratio: 36.75:1

• Hose Diameter (cm): 2.5
• Hose Diameter (in): 0.98
• Hose Diameter (mm): 25
• Hose Material: FDA Nitrile

• Housing Material: Powder Coated Aluminum
• Inlet Size (cm): 5.1
• Inlet Size (in): 2.0
• Inlet Size (mm): 50.8

• Inlet Thread Type: Tri-Clamp

• Lubricant Material: FDA Glycerin

• Maximum Flow Rate (GPH): 0
• Maximum Flow Rate (GPM): 0
• Maximum Flow Rate (L/h): 0
• Maximum Flow Rate (L/min): 0

• Maximum Fluid Pressure (bar): 8.6
• Maximum Fluid Pressure (kPa): 861.8
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 8.6
• Maximum Fluid Pressure (kPa): 861.8
• Maximum Fluid Pressure (psi): 125

• Maximum Operating Temperature ( degree C): 40
• Maximum Operating Temperature ( degree F): 104

• Maximum Pump Speed (RPM): 0

• Minimum Flow Rate (GPM): 0

• Minimum Pump Speed (RPM): 0

• Minimum Temperature ( degree C): -10
• Minimum Temperature ( degree F): 14

• Motor Type: Brushless DC

• Outlet Size (cm): 5.1
• Outlet Size (in): 2.0
• Outlet Size (mm): 50.8

• Overall Height (cm): 0
• Overall Height (in): 0
• Overall Height (mm): 0
• Overall Length (cm): 0
• Overall Length (in): 0
• Overall Length (mm): 0
• Overall Width (cm): 0.0
• Overall Width (in): 0
• Overall Width (mm): 0.0

• Power Rating (HP): 0
• Power Rating (kW): 0.75

GG 198601

GG 19C706

GG 19M403

THERM-O-FLOW HOSE,HEATED,15-FT,#8,3000 PSI

Graco 19M403 15 ft. (4.6 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 8 (0.401 in. /10.2 mm ID)

Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.

• For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
• Maximum Fluid Working Pressure is dependent on operating temperature.
• Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65 degree F to 212 degree F (-54 degree C to 100 degree C) Rated at 3000 psi (207 bar, 20.7 Mpa) at Temperatures up to 400 degree F (204 degree C)

GG 19B236

GG 198587

GG 19C703

GG 19D236

GG 19M401

THERM-O-FLOW HOSE, HEATED, 6-FT, #8, 3000 PSI

Graco 19M401 6 ft. (1.8 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 8 (0.401 in. /10.2 mm ID)

Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.

• For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
• Maximum Fluid Working Pressure is dependent on operating temperature.
• Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65 degree F to 212 degree F (-54 degree C to 100 degree C)

• Hose Heating Type: Heated
• Hose Length (ft): 6
• Hose Length (m): 1.8

• Inside Diameter (in): 0.401
• Inside Diameter (mm): 10.2

• Material: PTFE Lined Stainless Steel Braid

• Maximum Temperature ( degree C): 204
• Maximum Temperature ( degree F): 400

• Maximum Working Pressure (bar): 276
• Maximum Working Pressure (MPa): 27.6
• Maximum Working Pressure (psi): 4000

GG 19B643

GG 19D021

GG 19D521

ULTRA SPRAYER, 490 XT, HI-BOY, NA

Graco 19D521 Ultra 490 XT Electric Airless Sprayer, Hi-Boy

The Ultra 490 XT delivers an airless spray experience like no other. Featuring a 1.3 HP Xtreme Torque motor, Next Generation Rapid-Response Pressure Control, elevated performance, and the longest life pump in its class, the Ultra 490 XT is sure to become a staple in your fleet.

• Xtreme Torque Motor Technology
  • 15X more torque than traditional motors
  • 8X more magnets provide unmatched power and performance
  • 90% lower running speeds extend motors life
  • Up to 10X quieter
• Rapid-Response Pressure Control
  • Instantly responds to deliver the best finish quality
  • More performance across its full tip size range
  • Industry's largest operating pressure range (50-3,300 psi)
• Selectable Performance Modes
  • Two selectable spray modes offer unique performance levels to boost efficiency on every job
  • Bring on the savings and achieve Xtreme Control with Low Pressure Mode (50 - 2,000 psi)
  • Use High Pressure Mode for Xtreme Performance (500 - 3,300 psi)
• Endurance Vortex Piston Pump with ProConnect
  • Endurance Vortex Rod lasts 3X longer than the closest competitor
  • ProConnect Pump Removal for fast on-the-job service
• TurboClean Cleaning System
  • Industry's fastest pump cleaning system
  • Delivers 3X faster cleaning with 1/2 the water
  • Convenient location
• WatchDog Pump Protection
  • Prevents damage by shutting off pump when it's time to refill
• Durable Filtration
  • Easy Out Filter provides easy maintenance and less clogging
• Easy Transport
  • Only 31 lbs (Stand)
• Gun, Hose and Tip Included
  • Contractor PC Gun & RAC X LP 517 SwitchTip

• Model: Ultra
• Series: 490 XT

• Frame Configuration: Hi-Boy

• Maximum Flow Rate (GPM): 0.7

• Maximum Tip Size (in): .025

• Maximum Working Pressure (psi): 3300

• Minimum Working Pressure (psi): 50

GG 19A770

GG 15M390

GG 15M483

GG 15M484

GG 15M485

GG 15M781

GG 15M675

GG 15N030

GG 15M861

GG 15N015

GG 15T258

GG 15T574

GG 15T500

GG 15R646

GG 15T311

GG 15T643

GG 15R977

GG 15R588

GG 15R974

GG 15T538

GG 15T544

GG 15T499

GG 15T560

GG 15T646

GG 15T280

GG 15R993

BLOCK, INLET, MXP

Graco 15R993 Trabon MXP Divider Valve - Intermediate Base Plate - 3/8-18 NPSF

• Inlet Block
• Must be ordered in multiples of 2
• 3/8-18 NPSF

• Model: Trabon
• Series: MXP

• Application: In-Plant Machinery

• Inlet Size (cm): 0.9525
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.525

• Inlet Thread Type: NPSF

GG 15T536

GG 15T260

GG 15T725

GG 15T793

GG 15T943

GG 15U077

BELLOWS, GLUTTON,MACHINED

Graco 15U077 UMHW Bellows Seal for Air Powered Glutton Pumps

GG 15U704

GG 15U395

GG 15U750

GG 15U930

GG 15U979

GG 15V208

GG 15V256

KIT, AUTOMATIC UPGRADE,PROMIX

Graco 15V256 Automatic Upgrade Kit for ProMix 2KS Manual Proportioner to an Automatic Proportioner

GG 15V344

GG 15V350

BOOTH, CONTROL ASSY

Graco 15V350 Remote Operator Station Kit

GG 15V551

GG 15V354

KIT, THIRD FLUSH, WALL PANEL

GG 15V624

TUBE,INJECTOR

GG 15V628

GG 15V760

GG 15V804

KIT, G3000 METER

Graco 15V804 G3000 Flow Meter Kit

GG 15V812

KIT, 2-LP CLR/CAT CHG STACK

Graco 15V812 2 Color/ Catalyst Low Pressure Valve Stack

GG 15V813

KIT, 4-LP CLR/CAT CHG STACK

Graco 15V813 Low Pressure Valve Stack for Low Pressure Color Change Kit for ProMix II Proportioner

GG 15V814

GG 15V821

KIT, WALL PANEL DUMP VALVE

Graco 15V821 Dump Valve Kit for Wall Panel for use with ProMix 2KS Electronic Proportioners

GG 15V826

KIT, GUN FLUSH BOX

Graco 15V826 Gun Flush Box Kit for all ProMix proportioners

Automated flushing system for manual spray guns with proportioning systems to prevent operator error, reduce labor, and contain flush stream

• Automated flushing system for manual spray guns
• Eliminates manual gun triggering for more accurate flushing and filling, and less waste
• Adaptors available for Pro Xp, AirPro and G15/G40 guns, sold separately

• Closed Door Height (in): 14
• Closed Door Height (mm): 356

• For Use With: ProMix 2KS, ProMix 2KE, ProMix PD2K Proportioning System

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (psi): 100

• Open Door Height (in): 21
• Open Door Height (mm): 533

• Outlet Size (in): 2
• Outlet Thread Gender: Female
• Outlet Thread Type: NPT

GG 15V954

GG 15W032

GG 15W034

GG 15U932

GG 15W046

GG 15V021

KIT, 50CC INTEGRATOR

Graco 15V021 Integrator Kit (50 cc) for ProMix 2KS Proportioners

GG 15W136

GG 15W798

GG 15W909

GG 15X129

GG 15X116

GG 15X304

KIT, VALVE,COLOR CHANGE

Graco 15X304 Low Pressure Air Actuated Dispense Valve

• Compatible Drum Size (gal): 5
• Compatible Drum Size (L): 20

GG 15X385

KIT,GUN BODY REPAIR

KIT INCLUDES: BODY, GUN [QTY. 1], SCREW, SHC, 8-32X2.75, CS [QTY. 2], WASHER, LOCK, INT [QTY. 2], NUT, SQUARE [QTY. 2], SWIVEL, ASSY, (INLINE WITH STOP) [QTY. 1], ADHESIVE, ANAEROBIC [QTY. 1]

GG 15X622

GG 15X727

GG 15X779

KIT, REPLACE,EASYKEY DISPLAY

GG 15X729

GG 15X858

GG 15Y032

GG 15Y035

GG 15X888

GG 15Y048

GG 15Y468

GG 160098

GG 15X882

GG 160077

GG 15Y034

GG 160068

GG 160138

GG 160016

GG 15Y363