Fluid Regulators

GG 221118

REGULATOR, PRESS, FLUID

Low Pressure Fluid Regulator, 250 Max psi, 20-160 psi Range, 3.0 GPM, SST, Spring Type, 3/8 (f) x 3/8 (m), 1/4 (f) PortFluid regulators keep your system functioning more productively

Available with mechanical control or pneumatic control

Suitable for fluids with low and high viscosities

Models available with wetted parts made of stainless steel

Application-oriented pressure ranges

GG 222115

REGULATOR, PRESSURE, FLUID

Low Pressure Fluid Regulator, 300 Max psi, 20-160 psi Range, 3.0 GPM, SST, Spring Type, 3/8 (f) x 3/8 (m), 1/4 (f) PortFluid regulators keep your system functioning more productively.Available with mechanical control or pneumatic controlSuitable for fluids with low and high viscositiesModels available with wetted parts made of stainless steelApplication-oriented pressure ranges

GG 223623

REGULATOR, PRESS, FLUID

Gun Mounted Fluid Regulator, 3/8 twistlock inlet/outlet, 200 max inbound fluid psi (14 bar), SST wetted partsStainless steel materials are compatible with catalyst and waterborne materialsEasy and accurate pressure adjustment at the gun to fine tune pressure settings during productionConnects quickly to spray guns using twistlock connectorCirculate materials though the regulator to ensure a uniform fluid suspension and eliminate material stagnation

GG 224486

REGULATOR BACK PRESSURE

Graco 224486 Corrosion Resistant Fluid Back Pressure Regulator, 300 Max psi, SST, Acetal & PTFE Wetted Parts, 1-1/4 (f) x 1-1/4 (f), with Gauge

Back pressure regulators use closed loop control to maintain the pressure of the system regardless of flow demand

• Stainless steel membrane diaphragm is highly wear resistant while maintaining accurate responsiveness
• Low Shear diaphragm valve has minimal restriction to reduce material degradation and color matching issues, especially with metallic paint
• Stainless steel wetted materials are compatible with catalyst and waterborne materials

• Compatible Material: Catalyst, Waterborne

• Gauge Port Size (cm): 0.635
• Gauge Port Size (in): 1/4
• Gauge Port Size (mm): 6.35

• Gauge Port Type: NPT

• Includes: Gauge
• Inlet Size (cm): 3.81
• Inlet Size (in): 1-1/2
• Inlet Size (mm): 38.1

• Inlet Thread Type: NPT

• Maximum Flow Rate (GPM): 20
• Maximum Flow Rate (L/min): 75

• Maximum Regulated Pressure (bar): 14
• Maximum Regulated Pressure (kPa): 1400
• Maximum Regulated Pressure (psi): 200

• Maximum Viscosity (cP): 1000

• Maximum Working Pressure (bar): 21
• Maximum Working Pressure (kPa): 2100
• Maximum Working Pressure (psi): 300

• Minimum Regulated Pressure (bar): 1
• Minimum Regulated Pressure (kPa): 100
• Minimum Regulated Pressure (MPa): 0.1
• Minimum Regulated Pressure (psi): 15

• Outlet Size (cm): 3.81
• Outlet Size (in): 1-1/2
• Outlet Size (mm): 38.1
• Outlet Thread Type: NPT

GG 234270

REGULATOR, PRESS, P150-VP DN7, NPT

High Pressure Fluid Regulator, 5000 Max psi, 300-2000 psi Range, 11.7 GPM, SST, Air Type, 3/4 (f) x 3/4 (f), 1/4 BSPP PortOur pneumatically operated fluid pressure regulators are designed primarily for use with highly viscous coatings

GG 238891

D/S Regulator, 3/8In, Ss, 3000-5000 psi

GG 238893

REGULATOR, PRESSURE, FLUID

Graco 238893 High Fluid Pressure Regulator, Corrosion Resistant, 6000 Max psi, 500-4000 psi Range, 1.0 gpm, SST, Air, 3/8(f) x 3/8(f), 1/4(f) Port

• Stainless steel wetted materials are compatible with catalyst and waterborne materials
• Tungsten and carbide materials ensure low wear and long life
• Valve cartridge for quick cleaning and replacement - reduce downtime

• Actuation Type: Air

• Gauge Port Size (cm): 0.635
• Gauge Port Size (in): 1/4
• Gauge Port Size (mm): 6.35

• Gauge Port Type: NPT

• Includes: Gauge
• Inlet Size (cm): 0.9525
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.525

• Inlet Thread Type: NPT

• Maximum Flow Rate (GPM): 1
• Maximum Flow Rate (L/min): 3.8

• Maximum Regulated Pressure (bar): 276
• Maximum Regulated Pressure (kPa): 27600
• Maximum Regulated Pressure (MPa): 28
• Maximum Regulated Pressure (psi): 4000

• Maximum Viscosity (cP): 15000

• Maximum Working Pressure (bar): 414
• Maximum Working Pressure (kPa): 41400
• Maximum Working Pressure (MPa): 41
• Maximum Working Pressure (psi): 6000

• Minimum Regulated Pressure (bar): 34
• Minimum Regulated Pressure (kPa): 3400
• Minimum Regulated Pressure (MPa): 3.4
• Minimum Regulated Pressure (psi): 500

• Outlet Size (cm): 0.9525
• Outlet Size (in): 3/8
• Outlet Size (mm): 9.525

GG 238939

Kit, Regulator

GG 246687

REGULATOR, MASTIC

Air Operated Mastic Fluid Pressure RegulatorThese regulators control downstream pressure for mastic or semi-solid material. Install a regulator ahead of each spray gun or extruder gun in a multiple outlet system. The regulator provides precise pressure control to each spray gun from a common header system. It also dampens flow surges when line valves are opened and during pump stroke changeover.

GG 25R457

REGULATOR, BP, AIRPILOT, HIGH-FLOW

Low Shear Fluid Back Pressure Regulator, 300 Max psi, 25 gpm Max flow rate, SST, Pneumatic, high wear, sanitary inlet/outletGraco’s low shear back pressure regulator (BPR) minimizes shear and prevents paint degradation so that manufacturers produce consistent finish quality.Air operated model works with Intelligent Paint Kitchen (IPK) control to reduce energy consumption and paint shearUltralife series ceramic coated parts resist wear and increase service lifeLow profile, compact design and backwards compatibility mean easy installation and replacement

GG 25R490

REGULATOR, BACK PRES, MP, AIR, 30 TO 1

Medium Pressure Fluid Back Pressure Regulator, 3000 Max psi, 5 gpm Max flow rate, SST, PneumaticImprove finishing process control with this medium pressure, pneumatic back pressure regulator (BPR).Interface with Graco’s Intelligent Paint Kitchen (IPK), controlling pressure and flow without human intervention.Gain better resolution than other BPR brands, adjusting more accurately to keep fluid pressure at desired levels.

GG 25R647

REGULATOR, BP, MECHANICAL, HIGH-FLOW

Low Shear Fluid Back Pressure Regulator, 300 Max psi, 25 gpm Max flow rate, SST, Mechanical, high wear, sanitary inlet/outletGraco’s low shear back pressure regulator (BPR) minimizes shear and prevents paint degradation so that manufacturers produce consistent finish quality.Innovative flow path geometry provides industry-leading low shear capabilityUltralife series ceramic coated seat and flow directors significantly increase wear resistance capability and service lifeBest-in-class performance holds pressure constant while flow rate changes

IW 8077B

Low Pressure Paint Regulator

RR 107755-C-C

Back Pressure Regulator

RR 70171-04

Regulator Assembly, Flow Automotive

RR LREG5001-02

Fluid Regulator, Plastic, 1:2, 1/4" Tube

RR LREG5001-04

Fluid Regulator, Plastic, 1:4, 1/4" Tube

RR TR-100952

Material Regulator, Washer

SATA 1099953

Filter, Regulator, Triple Stage Unit 584