ENERPAC S100272

EP RACH-208

EP RACH-302

EP RACH-304

EP RACH-306

EP RACH602

RACH-Series Hollow Plunger Hydraulic Cylinders (sometimes called center-hole cylinders) feature a hollow plunger with an internal thread to allow fixing to the component to be pulled. This makes them the ideal choice for when you need a lighter, more portable cylinder for applications such as tensioning, testing, pulling, and lifting. Each RACH Cylinder is rated for up to 10,000 psi (700 bar) and compliant with ASME B30.1.

Each RACH Cylinder is single-acting and uses a high-strength return spring for rapid retraction. All are equipped with bolt-on hardened steel saddles and a steel base plate for increased durability.

Aluminum is not only lightweight, but also inherently less corrosive than steel, which makes it a great material for use in many caustic environments. For enhanced protection, RACH Aluminum Cylinders are finished with an anodized hard coat finish to resist damage and extend cylinder life.

• Type: Hydraulic Cylinders
• Max Bar: 700
• Max PSI: 10000

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: RACH
• Stroke Inches: 1.97
• Stroke MM: 50
• SubTypes: Aluminum Hollow Plunger Cylinder

• Hollow plunger design allows for both pull and push forces
• Composite bearings increase cylinder life and side load resistance
• Hard coat finish on all surfaces resists damage and extends cylinder life
• Handles included on all models
• Floating center tube increases seal life
• Steel baseplate and saddle for protection against load-induced damage
• Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
• High-strength return spring for rapid cylinder retraction
• CR400 coupler and dustcap included on all models
• All cylinders meet ASME B-30.1 standards

EP RACH-608

EP RACL-202

EP RACL-208

EP RACL-506

EP RAR-1008

EP RAR-3010

EP RB-10

EP RC-1012

EP RC-1014

EP RC-151

EP RC-1510

EP RC-1512

EP RC-1514

EP RC-152

EP RC-156

EP RC-158

EP RC-251

EP RC-2510

EP RC-2512

EP RC-258

EP RC-308

EP RC-502

EP RC-51

EP RCH-1211

EP RD-256

EP RD-46

EP RD-910

EP RD-96

EP REB-5

EP REP-5

EP RFL-102

EP RLT-110

EP RR-10013

EP RR-1006

EP RR-1012

EP RR-1502

EP RR-3014

EP RR-308

EP RR-5013

EP RRH-1001

EP RRH-1508

EP RRH-3010

EP RRH-603

EP RSM-1000

EP RSM-1500

EP RSM-50

EP RSM-750

EP SCL-101H

EP SCL-302TB

EP SCL-502H

EP SCR-1010TB

EP SCR-1010H

EP SCR-102FP

EP SCR-106H

EP SCR-106TB

EP SCR-154TB

EP SCR-252H

EP SCR-55TB

EP SGH-14

EP SGH-24

EP SGM-10

EP SGM-147SET

EP SGM-20

EP SLRD-351

EP SLRS-121

EP SP-35S

EP SPD-438

EP SPD-563

EP SPD-813

EP SPD-688

EP SRS-500TB

EP STLS-21

EP STLS-51

EP STRS-121

EP STRS-21

EP SULD-92

EP SULS-121

EP SURD-202

EP SURS-121

EP T-630

EP 11100

Enerpac ultra-high-pressure, hydraulic hand pumps are offered as single-stage or 2 stage manual pumps that can handle up to 40,000 psi (2800 bar). Typical industrial applications include lifting, testing, calibration, maintenance, and repair.

The P2282 model provides two speed operation to reduce the number of handle strokes and is lighter than steel equivalents. The two-speed operation requires up to 78% fewer handle strokes than single-speed hydraulic hand pumps, and the handle locks into place for secure transport.

The single-speed models, 11100 and 11400, are built using 303 Stainless steel construction. Ideal for use with many different fluids, such as distilled water, alcohol, diesters, silicones, soluble oils and petroleum. The 11100 model is rated up to 10,000 psi (700 bar) and the 11400 model is rated up to 40,000 psi (2800 bar)

Both the single-speed and the two-speed models have a large release knob for improved control of pressure release.

• Type: Hydraulic Pump
• Max Bar: 700
• Max PSI: 10000

• Product Group: Pumps
• Product Line: Industrial Tools
• Series: 11
• SubTypes: Hand Pump - Single Speed

• 303 Stainless steel construction enable use with many different fluids, such as distilled water, alcohol, diesters, silicones, soluble oils and petroleum
• Large release knob for improved control of pressure release
• Outlet ports are 3/4" -16 cone for 40,000 psi rating

• Spare Part(s): 11000KU, F473900SR, SPL3289S2
• Accessories: 4.11464116641246E+89

EP 1640016-01

• Type: Spreader Accessory

• Product Group: Flange Maintenance Tools
• Product Line: Industrial Tools, Bolting Tools
• SubTypes: Stepped Block

Set Includes
• 2 x SWi5TE Step Block
• 2 x M6 CSK Hex Screw
• 2 x Retaining Washer
• 1 x SWi5TE Large Safety Block
• 2 x 4mm Allen Key

EP 41979E

EP 42412E

EP 45970E

EP B1320028

• Type: Service Kit

• SubTypes: Repair Part

EP BHR16A

EP BHR32A

EP BHY32A

EP CB108005SR

• Type: ERP

• SubTypes: Repair Part

EP CR355167

• Type: Service Kit

• SubTypes: Gasket

EP CR83044

• Type: Service Kit

• SubTypes: Stop Ring

EP CST27151

• Type: Hydraulic Cylinders
• Max PSI: 5000

• Product Group: Cylinders and Jacks
• Product Line: Work Holding Tools
• Series: CST
• Stroke Inches: 0.59
• SubTypes: Workholding Threaded Cylinder

• Minimum cylinder diameter combined with maximized clamping forces
• Threaded body allows fine positioning and easy installation
• Internal plunger wipers allow maintenance-free, high-cycle performance
• Center-tapped plungers will hold workpiece contact buttons
• Single-acting models with spring return simplify hydraulic tubing requirements
• Double-acting models are recommended for high-cycle applications

• Accessories: MF421, FN421, BS91

EP DA11433900SR

EP DA11539380

• Type: Service Kit

• SubTypes: Repair Part