ENERPAC S100272

EP RC-108

EP RC-53

EP RC-55

EP RC-57

EP RC-59

EP RCH-202

EP RCH-306

EP RCH-603

EP RCS-201

EP RRH-307

EP RSM-300

EP S3000X

S-Series Square Drive Hydraulic Torque Wrenches are the reliable choice for repetitive heavy industrial use. Built for heavy-duty bolting and enduring durability, these powerful tools provide a low total cost of ownership.

ATEX declared. Calibration certificate included. All S-Series X-edition tools are CE - ATEX declared and are shipped complete with a calibration certificate.

The single body design is constructed from tough steel, making it more durable for heavy users than alternative aluminum and modular designs.

With ATEX certification you can be reassured that S-Series Torque Wrenches meet the necessary safety standards for safe use in potentially explosive environments.

• Type: Torque Wrench
• Max PSI: 10000

• Product Group: Torque Wrenches, Torque Wrench Pumps
• Product Line: Bolting Tools
• Series: S
• SubTypes: Square Drive Torque Wrench

• Compact, high-strength single-body construction provides a small operating radius without sacrificing endurance.
• 35 degree rotation angle and rapid return stroke for fast operation.
• Tough manifold design with added safety feature for enhanced operator safety.

• 360 degree click-on reaction arm with quick release lever provides easier handling, even when wearing gloves.
• Includes robust handle which mounts on both sides of tool for extra maneuverability.
• Push button square drive release for quickly reversing the square drive for tightening or loosening.

• Available with optional enhanced tilt and swivel TSP300 manifold for horizontal and vertical maneuverability, with greater durability*

• Constant torque output provides accuracy of +/-3% across full stroke.
• Optional Angle-of-Turn Indicator provides measurement of rotation.

• Shipped complete with a calibration certificate.

• CE-ATEX certified for safe use in explosive environments.

• Set Includes: SWH6A, SD30100
• Accessories: BUS01, BUS02, BUS03, BUS04, BUS05, BUS06, BUS07, BUS08, BUS09, BUS10, MCS7500C, SWH6S, AOT30, RTE30X, SRS301X, SRS302X, SRS303X, ERAK3000, TWRAKS15, STTLS31046, STTLS31055, TSP300

EP STLD92

• Type: Work Holding Clamp
• Max Bar: 350
• Max PSI: 5000
• Min Bar: 35
• Min PSI: 500

• Product Group: Workholding Tools
• Product Line: Work Holding Tools
• Series: ST
• Stroke Inches: 0.9
• Stroke MM: 23
• SubTypes: Swing Clamp - Threaded Body

• Body thread for precise cylinder height positioning
• Threaded port connection
• Easy installation and removal
• Greatest flexibility in fixture design
• 30, 45 and 60 degree swing angles available on request
• Enerpac threaded body swing clamps are threaded directly into the fixture.
• The cylinder height is adjusted to the appropriate height, and then locked in place using a jam nut

EP V-66

EP W4000CHKB

• Type: Service Kit

• SubTypes: Cassette Hardware Kit

EP W4000RLK

• Type: Service Kit

• SubTypes: Retract Link Kit

EP W4000X

W -Series Low Profile Hydraulic Torque Wrenches provide a superior strength to size ratio. Built for heavy-duty bolting and enduring durability, these powerful tools provide low total cost of ownership.

A low-profile torque wrench uses interchangeable cassettes and is the ideal choice where clearance around the nut is restricted (such as in the oil and gas industry). For working in these environments, W-Series drive units and cassettes offer the reassurance of ATEX certification to ensure they meet the necessary safety standards in potentially explosive environments.

Choose this W-Series Drive Unit and compatible cassettes for the ultimate in productivity, durability, reliability in challenging environments. With a product at this level, you can expect hassle-free ownership, superior quality, and extra features, such as quick-change cassettes.

• Type: Torque Wrench
• Max PSI: 10000

• Product Group: Torque Wrenches, Torque Wrench Pumps
• Product Line: Bolting Tools
• Series: W - Drive Unit
• SubTypes: Low Profile Drive Unit

• Superior strength to size ratio provides easy access to difficult to reach applications without sacrificing endurance
• 30° rotation angle and rapid return stroke provide fast operation
• Tough manifold design with added safety feature for enhanced operator safety
• Fast release drive unit enables rapid exchange of cassettes, no tools required
• Quick and easy disassembly for maintenance without special tools
• Includes robust handles which mount on both sides, and the tops of cassettes to allow for extra maneuverability
• Available with optional enhanced tilt and swivel TSP300 manifold for horizontal and vertical maneuverability, with greater durability
• Drive unit compatible with W-Series and UltraSlim Cassettes
• Constant torque output provides accuracy of +/-3% across full stroke
• ATEX declared. All W-Series X-edition drive units are CE - ATEX declared.

• Set Includes: SWH6A
• Accessories: BUS02, BUS03, BUS04, BUS05, BUS06, BUS07, BUS08, BUS09, SWH6S, WTE40, WRP40, TSP300

EP 68855E

EP LWB1

• Type: Service Kit

EP P842

Enerpac lightweight hydraulic hand pumps are a convenient alternative to heavier steel pumps without any sacrifice in performance or safety. Each model is rated up to 10,000 psi (700 bar).

The durable glass-filled nylon reservoir and nylon encapsulated aluminum pump base offers an unrivalled combination of strength, weight, and resistance to corrosion.

Lightweight single-speed hydraulic hand pumps offer the simplicity needed for a wide range of industrial applications. The 2-stage hydraulic models reduce the number of handle strokes by as much as 78% compared to a single speed pump. This is ideal when you want to advance a tool such as a cylinder to the point of load contact. High flow is delivered when it's needed most before the pump automatically switches to the low flow high-pressure stage.

With a choice of oil capacities up to 453 in3 (7423 cm3), we're certain you'll find a lightweight hydraulic hand pump to handle multiple cylinder hook-ups. For compatibility with double-acting tools choose the P842.

• Type: Hydraulic Pump
• Max Bar: 700
• Max PSI: 10000

• Product Group: Pumps
• Product Line: Industrial Tools
• Series: P
• SubTypes: Hand Pump - Two Speed

• Lightweight and compact design
• Durable glass-filled nylon reservoir and nylon encapsulated aluminum pump base for maximum corrosion resistance
• Two-speed operation on most models reduces handle strokes by as much as 78% over single speed pumps
• Lower handle effort to minimize operator fatigue
• Handle lock and lightweight construction for easy carrying
• Large oil capacities to power a wide range of cylinders or tools
• Non-conductive fiberglass handle for operator safety
• Internal pressure relief valve for overload protection

• Spare Part(s): P842K50

EP RC10K32

• Type: Service Kit

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• SubTypes: Spring Kit

EP XC-1201MB

EP XLK1

• Type: Pump Accessory

• Product Group: Pumps
• Product Line: Industrial Tools
• SubTypes: Joy Stick Lever Kit

EP ZPS-E3

EP ZPT-U4

EP W4206X

W-Series Low Profile Hexagon Cassettes work with your compatible drive unit, giving you the access needed for hassle-free bolting in tight spaces.

ATEX declared. Calibration certificate included. All W-Series X-edition cassettes are CE - ATEX declared and are shipped complete with a calibration certificate.

Robustly constructed from steel especially for heavy use and enduring durability, these robust cassettes are designed to ensure a low total cost of ownership. Fast release in the compatible drive units enable rapid exchange of cassettes - no tools required and no pins to lose!

The optimum nose radius in each cassette offers the ideal strength to size ratio for restricted clearance applications. (For exceptionally tight spaces consider the UltraSlim Cassettes).

Constant torque output provides accuracy of �3% across full stroke.

• Type: Torque Wrench
• Max PSI: 10000

• Product Group: Torque Wrenches, Torque Wrench Pumps
• Product Line: Bolting Tools
• Series: W - Cassette
• SubTypes: Cassette - Imperial or Metric

• Accessories: W4206R106, W4206R107, W4206R113, W4206R200, WTE40, WRP40

EP ZE2208MB

Enerpac ZE2 electric hydraulic pumps are based on our Z Pump platform - our most efficient and market proven design. Z-Class high-efficiency pumps offer higher oil flow and by-pass pressure, cooler running and 18% less current draw than comparable pumps.

The ZE2 pump utilizes many of the same robust valves, reservoir, and pump components as larger pumps in the ZE family. Combined with the efficient, easy to service pumping element, the ZE2 is suited to continuous use in manufacturing and workshop environments.

The 0.75 hp (0.56 kW) induction motor in the ZE2 enables productive flow rates, cooler running temperatures, quieter operation, and less power consumption compared to standard universal motors.

Multiple valve and control options allow you to match the pump to a wide range of pressing, punching, and many other operations.

• Type: Hydraulic Pump
• Max Bar: 700
• Max PSI: 10000

• Product Group: Pumps
• Product Line: Industrial Tools
• Series: ZE
• SubTypes: Electric Pump - High Flow

• 0.75 hp (0,56 kW) induction motor for long life and quiet operation
• Features Z-Class high-efficiency pump design; higher oil flow and by-pass pressure, cooler running and requires up to 18% less current draw than comparable pumps.
• Totally enclosed, fan-cooled industrial electric motors for an extended life and to stand up to harsh industrial environments.
• 71 to 79 dBA across the pressure range
• Low-voltage pendant, on certain models, provides additional safety for the operator.
• Multiple valve and reservoir configurations provide application specific models to match the most demanding industrial applications.
• Models available to suit single-acting or double-acting cylinders.
• High-strength, molded electrical enclosure protects electronics, power supplies and LCD readout from harsh industrial environments.
• LCD readout on electric valve models provides diagnostic and readout capabilities.
• IP54 Rating for superior dust and water protection.
• Wide range of optional factory installed accessories; including return line filter, pressure gauge, heat exchanger, skid bar, roll cage, foot switch, and more.

EP XSC1

• Type: Pump Accessory

• Product Group: Pumps
• Product Line: Industrial Tools
• SubTypes: Swivel Connector

EP WR-5

EP ZE3304SB-RT

• Type: Hydraulic Pump

• Product Group: Pumps
• Series: ZE

EP ZE3K

• Type: Service Kit

• Series: ZE
• SubTypes: Seal Kit

EP ZUTP1500SB-H

• Type: Hydraulic Pump
• Max Bar: 1500
• Max PSI: 21750

• Product Group: Bolt Tensioner Pumps, Bolt Tensioners
• Product Line: Bolting Tools
• Series: ZUTPS
• SubTypes: Electric Pump - Tensioning

• The ZUTP-Series of pumps achieve high pressure without the need for an intensifier. This allows for low maintenance, resulting in less cost for the end-user.
• The ZUTP1500-S Series with pendant-operated solenoid valve is ideal for multiple bolt tensioning applications as it allows for single-person operation. The operator can pressurize and depressurize the tensioner directly from the pendant.
• Solenoid-operated valve with 20 ft. pendant for remote control of valve and one-man operation
• Easily accessible manual override valve to release pressure if power is lost
• Safety relief valve limits output pressure
• Two-stage pump design provides high flow at low pressure for fast system fills and controlled flow at high pressure for accurate operation
• 1.7 hp heavy-duty universal motor provides the best performance-to-weight ratio
• Replaceable 10 micron reservoir breather and inline high pressure filter helps maintain oil cleanliness for optimum performance
• Panel-mounted 6" pressure gauge, with polycarbonate cover, is set into the protective metal shroud for improved visibility
• These products operate at ultra-high pressure, use only the specified fittings and hoses designed for these pressures.

EP 42412E

EP 45970E

EP B1320028

• Type: Service Kit

• SubTypes: Repair Part

EP BHY32A

EP CB108005SR

• Type: ERP

• SubTypes: Repair Part

EP CR355167

• Type: Service Kit

• SubTypes: Gasket

EP CST27151

• Type: Hydraulic Cylinders
• Max PSI: 5000

• Product Group: Cylinders and Jacks
• Product Line: Work Holding Tools
• Series: CST
• Stroke Inches: 0.59
• SubTypes: Workholding Threaded Cylinder

• Minimum cylinder diameter combined with maximized clamping forces
• Threaded body allows fine positioning and easy installation
• Internal plunger wipers allow maintenance-free, high-cycle performance
• Center-tapped plungers will hold workpiece contact buttons
• Single-acting models with spring return simplify hydraulic tubing requirements
• Double-acting models are recommended for high-cycle applications

• Accessories: MF421, FN421, BS91

EP DA11433900SR

EP DD1190950SR

• Type: ERP

• SubTypes: Repair Part

EP DD2687900SR

• Type: Service Kit

• SubTypes: Pendant

EP EBH544K

• Type: Pump Accessory

• Product Group: Pumps
• Product Line: Industrial Tools, Bolting Tools
• Series: SC/XC2 Accessory
• SubTypes: Battery

EP JH1006

EP LW16

Choose the LW-Series Vertical Lifting Wedge when you need to lift and lower heavy loads of up to 16-tons with a stable motion without slippage. A minimum insertion gap of 0.39" (10 mm) is needed which expands up to 2.02" (51.5 mm). Retraction force is supplied by the single-acting spring return cylinder. The maximum operating pressure is (10000 psi 700 bar).

The included SB2 stepped safety block provides reassuring support, and can also be used to increase the lifting height to 2.72" (69 mm). The LWB1 is a larger stepped block available as an option.

A compatible hydraulic pump is needed to operate the LW16. The Enerpac P392 Hand Pump, or the P392FP Foot Pump are ideal.

Alternatively, choose the LWC16 Vertical Lifting Wedge, which includes an integrated hand pump.

• Type: Spreader
• Max Bar: 700
• Max PSI: 10000

• Product Group: Flange Maintenance Tools
• Product Line: Industrial Tools
• Series: LW
• Stroke Inches: 0.83
• Stroke MM: 21
• SubTypes: Lifting Wedge

• Capacity Imperial Tons: 16
• Capacity KN: 157

EP RC5K33

• Type: Service Kit

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• SubTypes: Spring Kit

EP SCH202H

A hydraulic cylinder and pump set (porta power) provides a quick and easy way to get everything you need for a wide range of pulling, lifting, and pushing applications.

Included in this kit is an RCH single-acting hollow hydraulic cylinder. The hollow bore design of the cylinder includes collar threads for easy fixturing. RCH models over 20 tons (218 kN) include a nickel-plated floating center tube to reduce side load damage and to increase product life. Provided with the cylinder is a two-speed pump, a 6-foot hose, a calibrated gauge, and a gauge adaptor.

Configure your ideal kit by choosing from a range of 12 - 100 ton (125 - 933 kN) cylinders to suit your application. Your hydraulic pump can be selected from a wide choice of manual, air, or cordless options.

• Type: Cylinder And PumpSet
• Max Bar: 700
• Max PSI: 10000

• Product Group: Cylinders and Jacks, Pumps
• Product Line: Industrial Tools
• Series: SCH
• Stroke Inches: 2
• Stroke MM: 49
• SubTypes: Cylinder and Hand Pump Set

• Set Includes: P392, RCH202, HC7206, GF813P, GA3

EP SLRS201

• Type: Work Holding Clamp
• Max PSI: 5000
• Min PSI: 500

• Product Group: Workholding Tools
• Product Line: Work Holding Tools
• Series: SLR
• Stroke Inches: 1.16
• SubTypes: Swing Clamp - Lower Flange

• Flexible design allows for manifold or threaded port connection
• No fixture hole preparation required
• Easiest mounting preparation in the swing cylinder line
• Symmetrical rectangular flange design enables clamping at three sides of the cylinder
• Allows extra large parts to be clamped
• 30, 45 and 60 degree swing angles available on request
• Enerpac lower flange series swing clamps can be bolted to the fixture, allowing easy installation of the unit and does not require machined fixture holes. Hydraulic connections are made through SAE or BSPP oil connection or the standard integrated O-ring ports.

EP W8215X

W-Series Low Profile Hexagon Cassettes work with your compatible drive unit, giving you the access needed for hassle-free bolting in tight spaces.

ATEX declared. Calibration certificate included. All W-Series X-edition cassettes are CE - ATEX declared and are shipped complete with a calibration certificate.

Robustly constructed from steel especially for heavy use and enduring durability, these robust cassettes are designed to ensure a low total cost of ownership. Fast release in the compatible drive units enable rapid exchange of cassettes - no tools required and no pins to lose!

The optimum nose radius in each cassette offers the ideal strength to size ratio for restricted clearance applications. (For exceptionally tight spaces consider the UltraSlim Cassettes).

Constant torque output provides accuracy of �3% across full stroke.

• Type: Torque Wrench
• Max PSI: 10000

• Product Group: Torque Wrenches, Torque Wrench Pumps
• Product Line: Bolting Tools
• Series: W - Cassette
• SubTypes: Cassette - Imperial or Metric

• Accessories: W8215R203, W8215R206, WTE80, WRP80

EP XA1UE2LK

• Type: Service Kit

• SubTypes: Repair Part

EP XC115VC

EP 2000108A

• Type: Service Kit

• SubTypes: Pin

EP 41924SR

• Type: Service Kit

• SubTypes: Head Gland

EP 42442E

• Type: Component

• SubTypes: Repair Part

EP 42358E

• Type: Service Kit

• SubTypes: Repair Part

EP 42531E

• Type: Service Kit

• SubTypes: Repair Part

EP 42747E

• Type: Service Kit

• SubTypes: Piston Kit

EP 42968E

• Type: Service Kit

• SubTypes: Repair Part

EP 44245E

• Type: Service Kit

• SubTypes: Valve Assembly

EP 54401K

• Type: Service Kit

• SubTypes: Seal Kit

EP 66030E

• Type: Service Kit

• SubTypes: Bearing Roller

EP 66106E

• Type: Service Kit

• SubTypes: Bearing Kit

EP 66033E

• Type: Service Kit

• SubTypes: Bearing Kit

EP 69475E

• Type: Service Kit

• SubTypes: Washer

Ep 93950E

• Type: Service Kit

• SubTypes: Plug

EP 68709E

• Type: Service Kit

• SubTypes: Repair Part

EP 89754E

• Type: Service Kit

• SubTypes: Repair Part

EP 68391E

• Type: Service Kit

• SubTypes: Washer

EP 88743E

• Type: Service Kit

• SubTypes: Plug

EP 66474E

• Type: Service Kit

• SubTypes: Washer

EP CBE619028-1A

• Type: Service Kit

• SubTypes: Screw, Hex

EP 86269E

• Type: Service Kit

• SubTypes: Gasket

EP 68225E

• Type: Service Kit

• SubTypes: Spring

EP 68711E

• Type: Service Kit

• SubTypes: Spring

EP AM-21

EP 93605E

• Type: Service Kit

• SubTypes: Screw

EP CH-604

EP 68384E

• Type: Service Kit

• SubTypes: Spring

EP CDB-70502

EP DC8032116

• Type: Service Kit

• SubTypes: Repair Part

EP ZUTP1500B

• Type: Hydraulic Pump
• Max Bar: 1500
• Max PSI: 21750

• Product Group: Bolt Tensioner Pumps, Bolt Tensioners
• Product Line: Bolting Tools
• Series: ZUTP
• SubTypes: Electric Pump - Tensioning

• High efficiency Universal Motor draws lower amps for superior performance in remote locations with low power quality
• Two-stage pump design provides high flow at low pressure for fast system fills and controlled flow at high pressure for safe and accurate operation
• Compact and lightweight design fits through tight openings and provides easy handling
• Panel mounted 6" pressure gauge, with polycarbonate cover, is set into the protective metal shroud for improved visibility and safety
• Panel mounted user adjustable valve for safe and precise pressure control
• Safety relief valve limits output pressure
• All models meet CE safety requirements and all TÜV requirements
• These products operate at ultra-high pressure, use only the specified fittings and hoses designed for these pressures.

• Spare Part(s): DD1654920, DD1674424, DD2495920SR, DD2496920SR, DD2497920SR

EP ZCP-1

EP ZE2308PB

Enerpac ZE2 electric hydraulic pumps are based on our Z Pump platform - our most efficient and market proven design. Z-Class high-efficiency pumps offer higher oil flow and by-pass pressure, cooler running and 18% less current draw than comparable pumps.

The ZE2 pump utilizes many of the same robust valves, reservoir, and pump components as larger pumps in the ZE family. Combined with the efficient, easy to service pumping element, the ZE2 is suited to continuous use in manufacturing and workshop environments.

The 0.75 hp (0.56 kW) induction motor in the ZE2 enables productive flow rates, cooler running temperatures, quieter operation, and less power consumption compared to standard universal motors.

Multiple valve and control options allow you to match the pump to a wide range of pressing, punching, and many other operations.

• Type: Hydraulic Pump
• Max Bar: 700
• Max PSI: 10000

• Product Group: Pumps
• Product Line: Industrial Tools
• Series: ZE
• SubTypes: Electric Pump - High Flow

• 0.75 hp (0,56 kW) induction motor for long life and quiet operation
• Features Z-Class high-efficiency pump design; higher oil flow and by-pass pressure, cooler running and requires up to 18% less current draw than comparable pumps.
• Totally enclosed, fan-cooled industrial electric motors for an extended life and to stand up to harsh industrial environments.
• 71 to 79 dBA across the pressure range
• Low-voltage pendant, on certain models, provides additional safety for the operator.
• Multiple valve and reservoir configurations provide application specific models to match the most demanding industrial applications.
• Models available to suit single-acting or double-acting cylinders.
• High-strength, molded electrical enclosure protects electronics, power supplies and LCD readout from harsh industrial environments.
• LCD readout on electric valve models provides diagnostic and readout capabilities.
• IP54 Rating for superior dust and water protection.
• Wide range of optional factory installed accessories; including return line filter, pressure gauge, heat exchanger, skid bar, roll cage, foot switch, and more.

EP ZRC-04H

EP ZTM-Q

EP DC9178118

• Type: Service Kit

• SubTypes: Filter

EP DD6770259K

EP DD6987827K

• Type: Service Kit

• SubTypes: Repair Part

EP DD7064960

• Type: Accessory

EP E3-074K

• Type: Service Kit

• SubTypes: Spring Kit

EP GA45GC

• Type: Gauge
• Max Bar: 700
• Max PSI: 10000

• Product Group: Gauges, Pumps
• Product Line: Industrial Tools
• Series: GA45GC
• SubTypes: Pressure Gauge

• 45° angled gauge improves visibility
• Slim and narrow design
• Easy to fit in a broad range of systems
• Maximize controlled load movement
• Glycerine dampened gauge with dual scale
• Enerpac High Flow female coupler

EP G2535L

This G-Series Liquid Filled Pressure Gauge contains glycerin to protect pressure sensing parts from vibration, sudden pressure changes, and moisture.

The dual scale face shows both psi and bar readings, and the extensive range includes a wide selection of models with maximum working pressures ranging from 100 to 15000 psi (7 to 1000 bar).

When using your gauges for high-cycle applications, we recommend using gauge snubbers or needle valves.

• Type: Gauge
• Max Bar: 700
• Max PSI: 10000

• Product Group: Gauges, Pumps
• Product Line: Industrial Tools, Work Holding Tools
• Series: G
• SubTypes: Pressure Gauge

• Calibrated in dual scale reading in psi and bar
• All pressure sensing parts sealed and dampened by glycerine for long life
• Includes safety blow-out disk and pressure equalizing membrane
• Gauge snubbers or needle valves recommended for high cycle applications

EP GA-45GC

EP GP-10S

EP H13236

• Type: Service Kit

• SubTypes: Repair Part

EP H7202

H700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.

Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.

Diameters available 0.25 and 0.38” (6.4 and 9.7mm), and connection types include ¼” NPTF, â…œ" NPTF and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H700
• SubTypes: Thermo-plastic Hose

• For demanding applications, featuring a 4:1 safety factor
• Maximum working pressure of 10,000 psi
• Outside jacket is polyurethane, to provide maximum abrasion resistance
• Exhibits low volumetric expansion under pressure to enhance overall system efficiency
• Vinyl strain relief guard on both ends of hose to improve life and durability on all models.

EP H-9210

EP H-9308

EP HC-7206

EP HC-9206