ENERPAC S100272

EP HP3015

Threaded Hollow Saddle for Hollow Cylinders
Saddle - Threaded Hollow for Hollow Cylinders

• Type: Cylinder Accessories

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: HP
• SubTypes: Threaded Hollow Saddle

EP HPT1500

Two Speed, High Pressure Hydraulic Hand Pump with Gauge, 21,750 psi

The HPT1500 is a manually operated high-pressure hydraulic tensioner pump in a convenient portable format. With no need for trailing power cords or air hoses, the HPT1500 is ideal for bolt tensioning applications where there is no power source available.

This high-pressure hand pump creates a maximum working pressure of 21,750 psi (1500 bar), and the robust, but lightweight construction provides greater portability than powered tensioner pumps.

To minimize cycle times, the two-speed operation displaces a large volume of oil per stroke at the first stage, and the included pressure gauge keeps you fully informed throughout the process.

Important: These pumps operate at ultra high-pressure, use only the specified fittings and hoses designed for these pressures.

• Type: Hydraulic Pump
• Max Bar: 1500
• Max PSI: 21750

• Product Group: Bolt Tensioner Pumps, Bolt Tensioners
• Product Line: Industrial Tools, Bolting Tools
• Series: HPT
• SubTypes: Hand Pump - Tensioning Pump

• The Enerpac HPT high-pressure Hand Pump is ideally suited for use with hydraulic bolt tensioning tools and hydraulic nuts
• Lightweight and portable high-pressure hand pump
• Two-speed operation displaces a larger volume of oil per stroke, reducing cycle times for many testing applications
• Includes a gauge and coupler for direct connection to GT-Series bolting tools
• Integrated relief valve set at 21,750 psi
• These products operate at ultra-high pressure, use only the specified fittings and hoses designed for these pressures

EP HP2006

LEG, 9 1/2" LONG
Bearing Cup and Bearing Pullers (BHP-Series)

• Type: Puller Accessory

• Product Group: Pullers

EP HP3111

ADJUSTING ROD
Bearing Cup and Bearing Pullers (BHP-Series)

• Type: Service Kit

EP HSQ3500

Square Drive Cassette, 1 in. Square Drive Size

HSQ Square Drive Hydraulic Torque Wrench Cassettes work with compatible HMT-Series drive units, and feature an easy-to-use push button, quick release, reversible square drive.

ATEX declared. Calibration certificate included. All HSQ cassettes are CE - ATEX declared and are shipped complete with a calibration certificate.

With just three completely enclosed moving parts, the HSQ Cassette minimizes pinch points and reduces the need for maintenance.

Provided with each cassette is a fully adjustable 360 degree in-line reaction arm. This attaches around the square drive making it possible to turn the drive unit away from an obstacle.

HSQ-Series Cassettes offer the reassurance of ATEX certification to ensure they meet the necessary safety standards within potentially explosive environments.

Applications: Torque

• Type: Torque Wrench
• Max Bar: 690
• Max PSI: 10000

• Product Group: Torque Wrenches, Torque Wrench Pumps
• Product Line: Bolting Tools
• Series: HSQ
• SubTypes: Square Drive Cassette

Safety and Performance

• Innovative design that completely encloses all moving parts and minimizes pinch points
• Reaction arm supplied as standard
• Fully adjustable 360 degree in-line reaction arm
• Fine tooth ratchet prevents locking-on

Simplicity

• Simple robust design with just three moving parts for reduced maintenance
• Push button, quick release, reversible square drive

Versatility

• The reaction arm, positioned around the square drive instead of the back of the drive unit, provides you with the possibility to turn the drive unit away from an obstacle

Accuracy

• Constant torque output provides accuracy of +/- 3% across full stroke.

ATEX certified

• All HMT tools are CE - ATEX certified

Supplied with a calibration certificate.

IMPORTANT: You will need an HMT-drive unit to operate the HSQ-Square Drive Cassettes which must be ordered separately.

EP HT1510HR

21,750 psi, 9.84 ft., Hydraulic Tensioner Hose

• Type: Hose
• Max Bar: 1500
• Max PSI: 21750

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools, Bolting Tools
• Series: HT
• SubTypes: Tensioner Hose

• 21,750 psi hose
• Includes dust caps
• Can be used for subsea fastening systems
• Hoses can be inter-connected in multi-tool set-ups using nipples, couplers, T-pieces and Y-Pipe assemblies.

• Set Includes: BH150, BR150
• Accessories: BW150AW, B150B, BR150B, BH150B

EP IB1538

20 in. (508,0 mm), 44 lbs (20,0 kg), I-Beam Base for RJ Ratchet Jacks
I - Beam Base

• Type: Jack Accessory

• Product Line: Mechanical Tools
• Series: IB
• SubTypes: I-Beam Base

EP IPA5073

50 Ton, H-Frame Hydraulic Press with RR5013 Double-Acting Cylinder and ZA4408MX Air Pump

• Type: Hydraulic Press
• Max Bar: 700
• Max PSI: 10000

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 50
• Capacity KN: 498

• Quality welded frame for maximum strength and long life
• Exclusive Hydra-Lift bed for effortless adjustment of the vertical daylight (10-ton models are manual)
• Roller head design is standard to allow movement and locking of the cylinder from side to side(10-ton, 25-ton, and 30-ton are manual)
• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package

• Set Includes: RR5013, ZA4408MX, GF50P, HC9306, GA2
• Accessories: PK1002, A150, IPL100

EP IPE10060

100 Ton, H-Frame Hydraulic Press with RR10013 Double-Acting Cylinder and ZE4420SBN Electric Pump

• Type: Hydraulic Press
• Max Bar: 700
• Max PSI: 10000

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 100
• Capacity KN: 933

• Quality welded frame for maximum strength and long life
• Exclusive Hydra-Lift bed for effortless adjustment of the vertical daylight (10-ton models are manual)
• Roller head design is standard to allow movement and locking of the cylinder from side to side(10-ton, 25-ton, and 30-ton are manual)
• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package

• Set Includes: RR10013, ZE4420SB-N, GF871P, HC9306, GA3
• Accessories: PK1002, A175, IPL100

EP IPE1215

10 Ton, H-Frame Hydraulic Press with RC1010 Single-Acting Cylinder and ZE2208MB Electric Pump

• Type: Hydraulic Press
• Max Bar: 700
• Max PSI: 10000

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 10
• Capacity KN: 101

• Quality welded frame for maximum strength and long life
• Exclusive Hydra-Lift bed for effortless adjustment of the vertical daylight (10-ton models are manual)
• Roller head design is standard to allow movement and locking of the cylinder from side to side(10-ton, 25-ton, and 30-ton are manual)
• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package

• Set Includes: RC1010, ZE2208MB, GF10P, HC9306, GA2
• Accessories: IPK1012, A136

EP IPE2510

25 Ton, H-Frame Hydraulic Press with RC2514 Single-Acting Cylinder and ZE3310SBN Electric Pump

• Type: Hydraulic Press
• Max Bar: 700
• Max PSI: 10000

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 25
• Capacity KN: 232

• Quality welded frame for maximum strength and long life
• Exclusive Hydra-Lift bed for effortless adjustment of the vertical daylight (10-ton models are manual)
• Roller head design is standard to allow movement and locking of the cylinder from side to side(10-ton, 25-ton, and 30-ton are manual)
• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package

• Set Includes: RC2514, ZE3310SB-N, GF20P, HC9306, GA2
• Accessories: IPK3012, A130, IPL100

EP IPE5060

50 Ton, H-Frame Hydraulic Press with RR5013 Double-Acting Cylinder and ZE4420SBN Electric Pump

• Type: Hydraulic Press
• Max Bar: 700
• Max PSI: 10000

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 50
• Capacity KN: 498

• Quality welded frame for maximum strength and long life
• Exclusive Hydra-Lift bed for effortless adjustment of the vertical daylight (10-ton models are manual)
• Roller head design is standard to allow movement and locking of the cylinder from side to side(10-ton, 25-ton, and 30-ton are manual)
• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package

• Set Includes: RR5013, ZE4420SB-N, GF50P, HC9306, GA2
• Accessories: PK501, A150, IPL100

EP IPH010S10-1

10 Ton, H-Frame Hydraulic Press with RC1010 Single-Acting Cylinder, no pump and small pump mounting kit
H-Frame Presses (IP-Series)

• Type: Hydraulic Press
• Max PSI: 10000

• Product Group: Presses
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 10

• Set Includes: RC1010, GA2, GF10P, HC9306

EP IPH050D13-2

50 Ton, H-Frame Hydraulic Press with RR5013 Double-Acting Cylinder, no pump and large pump mounting kit
H-Frame Presses (IP-Series)

• Type: Hydraulic Press
• Max PSI: 10000

• Product Group: Presses
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 50

• Set Includes: RR5013, GA2, GF50P, HC9306

EP IPH1240

10 Ton, H-Frame Hydraulic Press with RC1010 Single-Acting Cylinder and P392 Hand Pump

• Type: Hydraulic Press
• Max Bar: 700
• Max PSI: 10000

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 10
• Capacity KN: 101

• Quality welded frame for maximum strength and long life
• Exclusive Hydra-Lift bed for effortless adjustment of the vertical daylight (10-ton models are manual)
• Roller head design is standard to allow movement and locking of the cylinder from side to side(10-ton, 25-ton, and 30-ton are manual)
• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package

• Set Includes: RC1010, P392, GF10P, HC9306, GA2
• Accessories: IPK1012, A136

EP IPH2531

25 Ton, H-Frame Hydraulic Press with RC2514 Single-Acting Cylinder and P80 Hand Pump

• Type: Hydraulic Press
• Max Bar: 700
• Max PSI: 10000

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 25
• Capacity KN: 232

• Quality welded frame for maximum strength and long life
• Exclusive Hydra-Lift bed for effortless adjustment of the vertical daylight (10-ton models are manual)
• Roller head design is standard to allow movement and locking of the cylinder from side to side(10-ton, 25-ton, and 30-ton are manual)
• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package

• Set Includes: RC2514, P80, GF20P, HC9306, GA2
• Accessories: IPK3012, A130, IPL100

EP IPL100-PLUK

Kit, Plunger
H-Frame Presses (IP-Series)

• Type: Service Kit

• SubTypes: Plunger Kit

EP IPH100D13-2

100 Ton, H-Frame Hydraulic Press with RR10013 Double-Acting Cylinder, no pump and large pump mounting kit
H-Frame Presses (IP-Series)

• Type: Hydraulic Press
• Max PSI: 10000

• Product Group: Presses
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 100

• Set Includes: RR10013, GA3, GF871P, HC9306

EP IPL100-SEAK

Kit, Seal
H-Frame Presses (IP-Series)

• Type: Service Kit

• SubTypes: Repair Part

EP IPLR100

Hydra-Lift for Daylight Adjustments, For 50 and 100 ton Roll Frame Presses

• Type: Press Accessory

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IPL
• SubTypes: Press Hydra-Lift

• Capacity Imperial Tons: 100

• Allows easy, effortless daylight adjustment.
• Includes accessory chain

EP JBI10

Base Plate for 10 ton Cylinders
Base Plate

• Type: Cylinder Accessories

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: JBI
• SubTypes: Base Plate

EP JBI25

Base Plate for 25 ton Cylinders
Base Plate

• Type: Cylinder Accessories

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: JBI
• SubTypes: Base Plate

EP JHA1506K2

150 Ton Jack Kit
Steel Jacks (JH-Series)

• Type: Service Kit

• SubTypes: Repair Part

EP JHA73K

REPAIR KIT
Aluminum Jacks (JHA-Series)

• Type: Service Kit

• SubTypes: Repair Part

EP JJ2510C

Super Jacks, 25 ton (222,4 kN) Capacity, 5 in (127 mm) Stroke, Steel Jack Housing

• Ratcheting screw jack design.
• Holds the load indefinitely, and will not creep down.
• Positive shoulder stop for safety.
• Available with aluminum or ductile iron housing.
• Ball bearings for smooth operation and low handle effort.
• Raise or lower the load precisely with the reversal ratchet socket with quick spin handle.
• CE Compliant - Our Jack design specifications meet or exceed ANSI /ASME B30.1 Safety Standards.

• Type: Jack

• Product Line: Mechanical Tools
• Series: JJ
• Stroke Inches: 5
• Stroke MM: 127
• SubTypes: Super Jacks

• Capacity Imperial Tons: 25
• Capacity KN: 222,4

• Accessories: SLB36

EP K1044

RING
Wedgie and Spread Cylinders (A and WR-Series)

• Type: Service Kit

• SubTypes: Ring

EP L119110SR

SPRING ASM
Enerpac Fasteners

• Type: Service Kit

• SubTypes: Spring Kit

EP K53028

SCREW
Single-Acting Cylinders (RC-Series and equivalent)

• Type: Service Kit

• SubTypes: Screw

EP L345045

SADDLE
Single-Acting Cylinders (RC-Series and equivalent)

• Type: Service Kit

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• SubTypes: Saddle Kit

EP L347040

PLUNGER REF DWG 501 BOM
Single-Acting Cylinders (RC-Series and equivalent)

• Type: Service Kit

• SubTypes: Plunger Kit

EP L661028

SCREW
Single-Acting Cylinders (RC-Series and equivalent)

• Type: Service Kit

• SubTypes: Screw

EP L748900SR

SADDLE

• Type: ERP

• SubTypes: Saddle Kit

EP LGH314

14 Ton, 3 Jaw, Hydraulic Lock-Grip Puller with RWH121 Hydraulic Cylinder
Applications: Pull

• Type: Puller
• Max PSI: 10150

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGH
• SubTypes: Lock-Grip Puller Hydraulic

• Capacity Imperial Tons: 14
• Capacity KN: 125

• LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 10,150 psi hydraulic cylinder.
• Quickly and easily mount on a wide range of applications
• Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: RWH121, FZ1065, LGH14K6

EP LGH310

10 Ton, 3 Jaw, Hydraulic Lock-Grip Puller with Hydraulic Cylinder
Applications: Pull

• Type: Puller
• Max PSI: 10150

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGH
• SubTypes: Lock-Grip Puller Hydraulic

• Capacity Imperial Tons: 10
• Capacity KN: 92

• LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 10,150 psi hydraulic cylinder.
• Quickly and easily mount on a wide range of applications
• Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0704

EP LGHMS310EB

10 Ton, 3 Jaw, Hydraulic Lock-Grip Master Puller Set with Electric Pump, 115V
Applications: Pull

• Type: Puller
• Max PSI: 10150

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGHMS
• SubTypes: Lock-Grip Master Puller Sets

• Capacity Imperial Tons: 10
• Capacity KN: 92

• All LGHMS-Series Master Puller Sets include an LGH-Series Puller, a Cross Puller, a Bearing Separator, a Bearing Cup Puller, a detachable Hollow Cylinder, a hose, a gauge and a pump
• LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 10,150 psi hydraulic cylinder.
• Quickly and easily mount on a wide range of applications
• Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Enerpac cylinders and pumps can be operated to 10,150 psi, but should not be operated past 5,000 psi when using the Cross Bearing Puller Set tools.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: LGH310, SGM0704, BHP112, BHP181, BHP180, PUD1300B, G2535L, HC7206C

EP LGHMS314EB

14 Ton, 3 Jaw, Hydraulic Lock-Grip Master Puller Set with Electric Pump, 115V
Applications: Pull

• Type: Puller
• Max PSI: 10150

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGHMS
• SubTypes: Lock-Grip Master Puller Sets

• Capacity Imperial Tons: 14
• Capacity KN: 125

• All LGHMS-Series Master Puller Sets include an LGH-Series Puller, a Cross Puller, a Bearing Separator, a Bearing Cup Puller, a detachable Hollow Cylinder, a hose, a gauge and a pump
• LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 10,150 psi hydraulic cylinder.
• Quickly and easily mount on a wide range of applications
• Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Enerpac cylinders and pumps can be operated to 10,150 psi, but should not be operated past 5,000 psi when using the Cross Bearing Puller Set tools.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: LGH314, RWH121, FZ1065, LGH14K6, BHP172, BHP282, BHP190, PUD1300B, G2535L, HC7206C

EP LGHMS324H

24 Ton, 3 Jaw, Hydraulic Lock-Grip Master Puller Set with Hand Pump
Applications: Pull

• Type: Puller
• Max PSI: 10150

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGHMS
• SubTypes: Lock-Grip Master Puller Sets

• Capacity Imperial Tons: 24
• Capacity KN: 215

• All LGHMS-Series Master Puller Sets include an LGH-Series Puller, a Cross Puller, a Bearing Separator, a Bearing Cup Puller, a detachable Hollow Cylinder, a hose, a gauge and a pump
• LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 10,150 psi hydraulic cylinder.
• Quickly and easily mount on a wide range of applications
• Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Enerpac cylinders and pumps can be operated to 10,150 psi, but should not be operated past 5,000 psi when using the Cross Bearing Puller Set tools.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: LGH324, RCH202, HP2015, LGH24K6, BHP272, BHP292, BHP280, P392, GA45GC, HC7206C

EP LGM203

3 Ton, 2 Jaw, Mechanical Lock-Grip Puller
Applications: Pull

• Type: Puller

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGM
• SubTypes: Lock-Grip Puller Mechanical

• Capacity Imperial Tons: 3
• Capacity KN: 26,7

• LGM-Series Pullers are an ideal solution for pulling small to medium-size wheels, sprockets, bearings and other similar shaft mounted parts. The puller's selfcentering closing system allows all jaws to move simultaneously, making it easy for a single operator to mount the puller and to perform the application. Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Quickly and easily mount on a wide range of applications
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGM-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0404

EP LGM207

7 Ton, 2 Jaw, Mechanical Lock-Grip Puller
Applications: Pull

• Type: Puller

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGM
• SubTypes: Lock-Grip Puller Mechanical

• Capacity Imperial Tons: 7
• Capacity KN: 62,3

• LGM-Series Pullers are an ideal solution for pulling small to medium-size wheels, sprockets, bearings and other similar shaft mounted parts. The puller's selfcentering closing system allows all jaws to move simultaneously, making it easy for a single operator to mount the puller and to perform the application. Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Quickly and easily mount on a wide range of applications
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGM-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0704

EP LGM204

4 Ton, 2 Jaw, Mechanical Lock-Grip Puller
Applications: Pull

• Type: Puller

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGM
• SubTypes: Lock-Grip Puller Mechanical

• Capacity Imperial Tons: 4
• Capacity KN: 35,6

• LGM-Series Pullers are an ideal solution for pulling small to medium-size wheels, sprockets, bearings and other similar shaft mounted parts. The puller's selfcentering closing system allows all jaws to move simultaneously, making it easy for a single operator to mount the puller and to perform the application. Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Quickly and easily mount on a wide range of applications
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGM-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0404

EP LGM305

5 Ton, 3 Jaw, Mechanical Lock-Grip Puller
Applications: Pull

• Type: Puller

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGM
• SubTypes: Lock-Grip Puller Mechanical

• Capacity Imperial Tons: 5
• Capacity KN: 44,5

• LGM-Series Pullers are an ideal solution for pulling small to medium-size wheels, sprockets, bearings and other similar shaft mounted parts. The puller's selfcentering closing system allows all jaws to move simultaneously, making it easy for a single operator to mount the puller and to perform the application. Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Quickly and easily mount on a wide range of applications
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGM-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0404

EP LGM308

8 Ton, 3 Jaw, Mechanical Lock-Grip Puller
Applications: Pull

• Type: Puller

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGM
• SubTypes: Lock-Grip Puller Mechanical

• Capacity Imperial Tons: 8
• Capacity KN: 71,2

• LGM-Series Pullers are an ideal solution for pulling small to medium-size wheels, sprockets, bearings and other similar shaft mounted parts. The puller's selfcentering closing system allows all jaws to move simultaneously, making it easy for a single operator to mount the puller and to perform the application. Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Quickly and easily mount on a wide range of applications
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGM-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0704

EP LGM306

6 Ton, 3 Jaw, Mechanical Lock-Grip Puller
Applications: Pull

• Type: Puller

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGM
• SubTypes: Lock-Grip Puller Mechanical

• Capacity Imperial Tons: 6
• Capacity KN: 48,9

• LGM-Series Pullers are an ideal solution for pulling small to medium-size wheels, sprockets, bearings and other similar shaft mounted parts. The puller's selfcentering closing system allows all jaws to move simultaneously, making it easy for a single operator to mount the puller and to perform the application. Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Quickly and easily mount on a wide range of applications
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGM-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0404

EP LH50

Direct Mounted Load Cell, 10,000 lbs Capacity

• Type: Tension Meter and Load Cell

• Product Group: Presses
• Product Line: Industrial Tools
• Series: LH
• SubTypes: Direct Mounted Load Cell

• Accuracy, plus/minus2% of full scale
• Zinc and bronze plated to resist rust and corrosion
• Dual-range readout in kilograms and pounds
• Cushioned metal case provides safe storage and transport
• Maximum indicating pointer reading for pre-selected forces or to maintain maximum force readings
• TM and LH models are 100% tested to verify accuracy within a plus/minus2% range. If your application requires a calibrated tool, it must be submitted for certification testing. Certification is NOT available from Enerpac.

EP LH5006

Remote Mounted Load Cell with 6 ft. Hose, 100,000 lbs Capacity

• Type: Tension Meter and Load Cell

• Product Group: Presses
• Product Line: Industrial Tools
• Series: LH
• SubTypes: Remote Mounted Load Cell

• Accuracy, plus/minus2% of full scale
• Zinc and bronze plated to resist rust and corrosion
• Dual-range readout in kilograms and pounds
• Cushioned metal case provides safe storage and transport
• Maximum indicating pointer reading for pre-selected forces or to maintain maximum force readings
• TM and LH models are 100% tested to verify accuracy within a plus/minus 2% range. If your application requires a calibrated tool, it must be submitted for certification testing. Certification is NOT available from Enerpac.

EP LH5006K

SEAL KIT BOM
Load Cells (LH-Series)

• Type: Service Kit

• SubTypes: Seal Kit

EP M24040

PLUNGER REF DWG 457 BOM
Double-Acting Long-Stroke Cylinders (RR-Series and equivalent)

• Type: Service Kit

• SubTypes: Plunger Kit

EP MHV1K

REPAIR KIT(FORMALLY 3066 KIT)

• Type: ERP

EP MK106

10 Ton (89,0 kN), General Purpose Hydraulic Cylinder and Hand Pump Maintenance Set with 17 Cylinder Attachments

• The Simplex MK106 Maintenance Kit provides a complete assortment of attachments that greatly expands the range of applications. Using thesevarious attachments allows you to custom build spreaders, straightening tools, clamps and a wide variety of other problem solving maintenancetools.
• Set includes a Simplex hand pump, cylinder, hose, gauge and gauge adaptor.
• Heavy duty case included.
• Rated at 5 tons when attachments are used.
• Quick lock and threaded adaptors included.
• Order as a set or individual components.
• R106 is rated at 10 tons at 10,000 psi. When using attachments or extensions do not exceed 5,000 psi (5 tons) reading on the gauge. Accessories & extensions are only rated at 5 tons. S2000A Spreader has an operating capacity of 1 ton.
• Add collar toe and flat base to build custom spreader or toe jack.
• Extensions, custom heads and adapters allow you to create tools that solve hundreds of problems. Simplex MK106 kits are used extensively for collision repair.
• Add a V-base and flat base for special spreading, holding and bending jobs.

• Type: Cylinder And PumpSet
• Max Bar: 700
• Max PSI: 10000

• Product Line: Hydraulic Tools
• Series: MK
• Stroke Inches: 6
• Stroke MM: 152.4
• SubTypes: Steel General Purpose Cylinder and Steel Hand Pump Set with 17 Cylinder Attachments

• Capacity Imperial Tons: 10
• Capacity KN: 89,0

• Set Includes: R106, P42, HCA6, G5, GA1-Simplex, S2000A, MK4, MK5, MK6, MK7, MK8, MK9, MK10, MK11, MK12, MK13, MK14, MK15, MK16, MK17, MK18, MK19, MK20, MK21

EP MMR30K

SWING CLAMP KIT
Threaded Body Metric

• Type: Service Kit

EP MPK2

PUMP NPT MANIFOLD KIT
PE/WE-Series

• Type: Service Kit

• SubTypes: Manifold Kit

EP MRS3001

5800 lbs Capacity, .10 in Stroke, Positive Clamping Hydraulic Cylinder
Applications: Clamp, Push

• Type: Hydraulic Cylinders
• Max Bar: 350
• Max PSI: 5000

• Product Group: Cylinders and Jacks
• Product Line: Work Holding Tools
• Series: MRS
• SubTypes: Workholding Positive Clamping Cylinder

• Heavy disk springs maintain the clamping force - hydraulic pressure is used for release
• Single-acting design allows easy setup of hydraulic system
• Hollow plunger design allows easy retrofit for mechanical clamping
• Custom buttons can be fitted into the plunger for clamping directly against a workpiece
• Threaded body allows easy cylinders mounting directly into fixture plate
• Internal threaded plunger allows accessories to be used easily for retrofit applications

• Accessories: BS202

EP MS21020

12.5 Ton, Hydraulic Cylinder and Hand Pump Set with 3 Cylinders and 53 Attachments

The MS21020 is our most complete maintenance set that equips you to complete a wide array of maintenance tasks. The assortment of 53 accessories enables you to quickly configure the ideal tool for just about any challenge imaginable.

This set includes three of our most popular hydraulic cylinders: The RC102, RC106, and the RC256. Using these cylinders with attachments will allow you to exert at forces up to 12.5 tons (116kN) and extend up to 6.25" (116mm) - Ideal when you need to push, pull, lift, press, straighten, spread, or clamp.

Also included is the lightweight P392 2-speed hydraulic hand pump, hose, gauge, A92 spreader attachment, lock-on or threaded connectors, and a storage crate.

Safe Operation
When using hydraulic cylinders with maintenance set attachments or components, the maximum system pressure must be limited to half of the rated pressure (5,000 psi / 350 bar). When not using attachments, the tonnage and pressure capacities are double these values.

Only use attachments provided with the set. Using non-Enerpac attachments and longer extension tubes could reduce column strength - potentially creating unsafe conditions.

Applications: Lift, Push, Pull, Press, Spread, Clamp

• Type: Cylinder And PumpSet
• Max Bar: 350
• Max PSI: 5000

• Product Group: Cylinders and Jacks, Pumps
• Product Line: Industrial Tools
• Series: MS
• Stroke Inches: 6.25
• Stroke MM: 158
• SubTypes: Cylinder with Attachments and Hand Pump Set

• Set Includes: P392, HC7206, RC102, RC106, RC256, GP10S, GA2, A13, A28, A21, A27, A20, A595, A14, A243, A10, A8, A6, A192, A305, A18, A185, A15, A607, A129, A128, A132, A238, A5, A141, A218, A19, A242, A92, A16, MZ1050, MZ1051, MZ1052, A285, MZ1002, MZ1003, A239, MZ1004, A240, MZ1005, A241, CW350

EP MS220

12.5 Ton, Hydraulic Cylinder and Hand Pump Set with 13 Cylinder Attachments

This hydraulic pump and cylinder set includes a complete assortment of accessories allowing you to quickly configure a unique tool to solve your many difficult maintenance tasks.

The set includes the RC256 Hydraulic Cylinder, which when used with attachments allows you to exert a force of 12.5 tons (116kN) and a stroke of 6.25" (116mm). Ideal when you need to push, pull, lift, press, straighten, or clamp.

Also included is the lightweight P392 2-speed hydraulic hand pump, hose, gauge, lock-on or threaded connectors, and a storage crate.

Safe Operation
When using hydraulic cylinders with maintenance set attachments or components, the maximum system pressure must be limited to half of the rated pressure (5,000 psi / 350 bar). When not using attachments, the tonnage and pressure capacities are double these values.

Only use attachments provided with the set. Using non-Enerpac attachments and longer extension tubes could reduce column strength - potentially creating unsafe conditions.

Applications: Lift, Push, Pull, Press, Spread, Clamp

• Type: Cylinder And PumpSet
• Max Bar: 350
• Max PSI: 5000

• Product Group: Cylinders and Jacks, Pumps
• Product Line: Industrial Tools
• Series: MS
• Stroke Inches: 6.25
• Stroke MM: 158
• SubTypes: Cylinder with Attachments and Hand Pump Set

• Set Includes: P392, HC7206, RC256, GP10S, GA2, A28, A27, A595, A243, A607, A238, A218, A242, A239, A240, A241, CW166

EP MVK2

REPAIR KIT
Modular Directional Control Valves

• Type: Service Kit

• SubTypes: Repair Kit

EP MVK3

REPAIR KIT FOR MODULAR VALVES
Modular Directional Control Valves

• Type: Service Kit

• SubTypes: Repair Kit

EP MVPM5

Sequence Valve, 366 in3/min Maximum Oil Flow

• Type: Valve
• Max Bar: 350
• Max PSI: 5000

• Product Group: Valves, Pumps
• Product Line: Work Holding Tools
• Series: MVP
• SubTypes: Sequence Valve

• Sequence valves block the oil to a secondary hydraulic circuit until pressure in the primary circuit reaches a preset level. The sequence valves have a built-in check system to allow the oil to flow back without external piping.
• Direct accurate pressure setting
• Pressure setting between 500-5000 psi for secondary circuit is secured with lock nut
• Manifold mounting ports on MVPM5
• Manifold O-rings included with MVPM5

EP NC2432

15 Ton Capacity, Hydraulic Nut Cutter, Hexagon up to 1.13 in

NC-Series Hydraulic Nut Splitters use a single blade configuration suited to general nut cutting applications across a wide range of industries.

The heat-treated steel blade with its optimized cutting head geometry cuts from one side, and the powerful internal spring brings it back to its starting position.

NC-Series Nut Cutters are compact, simple, and easy to use. The ergonomic design ensures comfortable use, thanks to the carefully considered angled head design and handle position.

Nuts are often difficult to remove, and while loosening them using tightening tools is possible, this generally requires larger equipment and takes more time.

Using a cutting torch or a hammer and chisel presents safety risks and can cause damage to the joint components. They also involve significantly longer setup and operational time.

Nut splitting with the Enerpac Hydraulic Nut Splitters is the safest and most efficient method - taking less time and avoiding costly damage to joint components.

Applications: Cut

• Type: Cutter
• Max Bar: 700
• Max PSI: 10000

• Product Group: Cutters
• Product Line: Industrial Tools, Bolting Tools
• Series: NC
• SubTypes: Nut Cutter

• bundleSet_IDs: NCB2432
• Capacity Imperial Tons: 15
• Capacity KN: 147

• Compact and ergonomic design, easy to use
• Unique angled head design
• Single-acting, spring return cylinder
• Heavy duty chisels can be reground
• Nut Splitters include spare chisel, spare set screw and wrench used to secure the chisel. A CR-400 coupler is standard.
• For applications with bolt sizes that are common to two tool model sizes, we recommend to select the larger of the two tools for the best results.
• These are not suited for square, star, round or stainless steel nuts. Maximum allowable hardness of nuts to be split is HRc-44.
• For materials and sizes not specified, contact Enerpac Technical Services.

• Accessories: NCB2432

EP NC3241

20 Ton Capacity, Hydraulic Nut Cutter, Hexagon up to 1.56 in

NC-Series Hydraulic Nut Splitters use a single blade configuration suited to general nut cutting applications across a wide range of industries.

The heat-treated steel blade with its optimized cutting head geometry cuts from one side, and the powerful internal spring brings it back to its starting position.

NC-Series Nut Cutters are compact, simple, and easy to use. The ergonomic design ensures comfortable use, thanks to the carefully considered angled head design and handle position.

Nuts are often difficult to remove, and while loosening them using tightening tools is possible, this generally requires larger equipment and takes more time.

Using a cutting torch or a hammer and chisel presents safety risks and can cause damage to the joint components. They also involve significantly longer setup and operational time.

Nut splitting with the Enerpac Hydraulic Nut Splitters is the safest and most efficient method - taking less time and avoiding costly damage to joint components.

Applications: Cut

• Type: Cutter
• Max Bar: 700
• Max PSI: 10000

• Product Group: Cutters
• Product Line: Industrial Tools, Bolting Tools
• Series: NC
• SubTypes: Nut Cutter

• Capacity Imperial Tons: 20
• Capacity KN: 196

• Compact and ergonomic design, easy to use
• Unique angled head design
• Single-acting, spring return cylinder
• Heavy duty chisels can be reground
• Nut Splitters include spare chisel, spare set screw and wrench used to secure the chisel. A CR-400 coupler is standard.
• For applications with bolt sizes that are common to two tool model sizes, we recommend to select the larger of the two tools for the best results.
• These are not suited for square, star, round or stainless steel nuts. Maximum allowable hardness of nuts to be split is HRc-44.
• For materials and sizes not specified, contact Enerpac Technical Services.

• Accessories: NCB3241

EP NC4150

35 Ton Capacity, Hydraulic Nut Cutter, Hexagon up to 2.00 in

NC-Series Hydraulic Nut Splitters use a single blade configuration suited to general nut cutting applications across a wide range of industries.

The heat-treated steel blade with its optimized cutting head geometry cuts from one side, and the powerful internal spring brings it back to its starting position.

NC-Series Nut Cutters are compact, simple, and easy to use. The ergonomic design ensures comfortable use, thanks to the carefully considered angled head design and handle position.

Nuts are often difficult to remove, and while loosening them using tightening tools is possible, this generally requires larger equipment and takes more time.

Using a cutting torch or a hammer and chisel presents safety risks and can cause damage to the joint components. They also involve significantly longer setup and operational time.

Nut splitting with the Enerpac Hydraulic Nut Splitters is the safest and most efficient method - taking less time and avoiding costly damage to joint components.

Applications: Cut

• Type: Cutter
• Max Bar: 700
• Max PSI: 10000

• Product Group: Cutters
• Product Line: Industrial Tools, Bolting Tools
• Series: NC
• SubTypes: Nut Cutter

• bundleSet_IDs: NCB4150
• Capacity Imperial Tons: 35
• Capacity KN: 343

• Compact and ergonomic design, easy to use
• Unique angled head design
• Single-acting, spring return cylinder
• Heavy duty chisels can be reground
• Nut Splitters include spare chisel, spare set screw and wrench used to secure the chisel. A CR-400 coupler is standard.
• For applications with bolt sizes that are common to two tool model sizes, we recommend to select the larger of the two tools for the best results.
• These are not suited for square, star, round or stainless steel nuts. Maximum allowable hardness of nuts to be split is HRc-44.
• For materials and sizes not specified, contact Enerpac Technical Services.

• Accessories: NCB4150

EP NC6075

90 Ton Capacity, Hydraulic Nut Cutter, Hexagon up to 2.88 in

NC-Series Hydraulic Nut Splitters use a single blade configuration suited to general nut cutting applications across a wide range of industries.

The heat-treated steel blade with its optimized cutting head geometry cuts from one side, and the powerful internal spring brings it back to its starting position.

NC-Series Nut Cutters are compact, simple, and easy to use. The ergonomic design ensures comfortable use, thanks to the carefully considered angled head design and handle position.

Nuts are often difficult to remove, and while loosening them using tightening tools is possible, this generally requires larger equipment and takes more time.

Using a cutting torch or a hammer and chisel presents safety risks and can cause damage to the joint components. They also involve significantly longer setup and operational time.

Nut splitting with the Enerpac Hydraulic Nut Splitters is the safest and most efficient method - taking less time and avoiding costly damage to joint components.

Applications: Cut

• Type: Cutter
• Max Bar: 700
• Max PSI: 10000

• Product Group: Cutters
• Product Line: Industrial Tools, Bolting Tools
• Series: NC
• SubTypes: Nut Cutter

• Capacity Imperial Tons: 90
• Capacity KN: 882

• Compact and ergonomic design, easy to use
• Unique angled head design
• Single-acting, spring return cylinder
• Heavy duty chisels can be reground
• Nut Splitters include spare chisel, spare set screw and wrench used to secure the chisel. A CR-400 coupler is standard.
• For applications with bolt sizes that are common to two tool model sizes, we recommend to select the larger of the two tools for the best results.
• These are not suited for square, star, round or stainless steel nuts. Maximum allowable hardness of nuts to be split is HRc-44.
• For materials and sizes not specified, contact Enerpac Technical Services.

• Accessories: NCB6075

EP NCB1924

NC1924 Nut Cutter Chisel Replacement
Replacement Chisel for NC Cutters

• Type: Cutter Accessory

• Product Group: Cutters
• Product Line: Industrial Tools, Bolting Tools
• Series: NCB
• SubTypes: Replacement Chisel

EP NCB2432

NC2432 Nut Cutter Chisel Replacement
Replacement Chisel for NC Cutters

• Type: Cutter Accessory

• Product Group: Cutters
• Product Line: Industrial Tools, Bolting Tools
• Series: NCB
• SubTypes: Replacement Chisel

EP NCB3241

NC3241 Nut Cutter Chisel Replacement
Replacement Chisel for NC Cutters

• Type: Cutter Accessory

• Product Group: Cutters
• Product Line: Industrial Tools, Bolting Tools
• Series: NCB
• SubTypes: Replacement Chisel

EP NCB4150

NC4150 Nut Cutter Chisel Replacement
Replacement Chisel for NC Cutters

• Type: Cutter Accessory

• Product Group: Cutters
• Product Line: Industrial Tools, Bolting Tools
• Series: NCB
• SubTypes: Replacement Chisel

EP NSH1927

12 Ton Capacity, Hydraulic Nut Splitter, Hexagon up to 1.06 in

NSH-Series Hydraulic Nut Splitters are suited to flange nut splitting jobs in the oil and gas industries.

The heat-treated steel blade with optimized cutting head geometry cuts from one side, and the powerful internal spring brings it back to its starting position.

NSH-Series Nut Cutters are simple and easy to use. They include an ergonomically designed revolving handle for comfortable working and to isolate shock and vibration. The supplied lanyard and revolving anchor point are drop tested to ensure safety.

Nut splitting with the Enerpac Hydraulic Nut Splitters is the safest and most efficient method - taking less time and avoiding costly damage to joint components.

Applications: Cut

• Type: Cutter
• Max Bar: 700
• Max PSI: 10000

• Product Group: Cutters
• Product Line: Industrial Tools, Bolting Tools
• Series: NSH
• SubTypes: Nut Splitter

• Capacity Imperial Tons: 12
• Capacity KN: 120

• Quick and easy cutting tip replacement
• Drop-tested revolving anchor point and safety lanyard
• Revolving composite handle for vibration and shock isolation
• Nut Splitters include set of hexagon keys and following spare parts:
  - cutting tip
  - tip retention screw
  - spare alignment screw
• Standard Safety Lanyard with each nut splitter. Includes steel cable with carabiners.
• CR400 female half coupler is standard
• Maximum allowable hardness to split is ASTM A194 Gr 2H. Not to be used on square nuts or stainless steel.

• Set Includes: CR400, FSC1
• Accessories: NSH1927CTK

EP P141K2

REPAIR KIT
Lightweight Hand Pumps

• Type: Service Kit

• Product Group: Pumps
• Product Line: Industrial Tools
• SubTypes: Repair Kit

EP P142ALSS

Two Speed, Extreme Environment Hydraulic Hand Pump, 20 in3 Usable Oil

• Type: Hydraulic Pump
• Max Bar: 700
• Max PSI: 10000

• Product Group: Pumps
• Product Line: Industrial Tools
• Series: P
• SubTypes: Hand Pump - Two Speed

• Corrosion resistant, nickel-plated valves and cylinders
• Stainless steel pump inserts will not corrode
• Viton Seals provide heat and chemical resistance
• Anodized aluminum pump reservoirs and plastic encapsulated pump bodies resist wet environments
• Two-speed operation reduces pump handle strokes 78% compared to single-speed pumps
• Pump handles lock for easy carrying

• Spare Part(s): DA8802900SR, P142ALSSK

EP P202K1

REPAIR KIT - REPLACES P202K
Repair part for lightweight hand pumps

• Type: Service Kit

• Product Group: Pumps
• Product Line: Industrial Tools
• SubTypes: Repair Kit

EP P181190W

RELIEF VALVE
Double-Acting Long-Stroke Cylinders (RR-Series and equivalent)

• Type: Service Kit

• Product Group: Pumps
• Product Line: Industrial Tools
• SubTypes: Relief Valve

EP P20857

CROSSPIN
Repair part for lightweight hand pumps

• Type: Service Kit

• Product Group: Pumps
• Product Line: Industrial Tools
• SubTypes: Crosspin

EP P25

Single Speed, Low Pressure Hydraulic Hand Pump, 200 in3 Usable Oil

These Low-Pressure Hydraulic Hand Pumps are durable, portable, highly efficient, and easy to use. Each model in the series features an all-steel construction, a chrome plated plunger, and a wiper system for long-lasting performance.

These pumps are constructed to power a wide range of single acting cylinders and tools in space restricted areas. The range includes the P51 that can be operated in the horizontal orientation only, and others also capable of operating in the vertical orientations: P18 with the pump head facing down, P25, P50 with the pump head facing up. Each is protected by external load-release valves and internal overload pressure-relief valves.

With a choice of oil capacities up to 200 in3 (3,277 cm3), and operating pressures of 2,500 psi (175 bar) - 5,000 psi (350 bar) you will find an Enerpac Low Pressure Hydraulic Hand Pump to suit your needs.

• Type: Hydraulic Pump
• Max Bar: 175
• Max PSI: 2500

• Product Group: Pumps
• Product Line: Industrial Tools
• Series: P
• SubTypes: Hand Pump - Single Speed

• P25 and P50 pumps oil in both forward and reverse handle movement improving overall efficiency, ideal when mounting space is restricted
• External load-release valve
• Internal pressure-relief valve for overload protection
• P25 and P50 vertical operation requires pump vent side facing up

• Spare Part(s): CA365024SR, P181190W, P50K1

EP P391K2

REPAIR KIT
Lightweight Hand Pumps

• Type: Service Kit

• Product Group: Pumps
• Product Line: Industrial Tools
• SubTypes: Repair Kit

EP P30718

SCREEN
Single-Acting Cylinders (RC-Series and equivalent)

• Type: Service Kit

• SubTypes: Repair Part

EP P301D

Two Speed, Heavy Duty Steel Hydraulic Hand Pump, 0.24 in3 (4 cm3) Oil Flow per Stroke at 10,000 psi (700 bar), 272 in3 (4450 cm3) Usable Oil, For use with Double-Acting Tools

• Heavy duty, metal construction for durability.
• High displacements of oil per stroke.
• Low, back saving handle effort.
• Large reservoir capacities.

• Type: Hydraulic Pump
• Max Bar: 700
• Max PSI: 10000

• Product Line: Hydraulic Tools
• Series: P Steel
• SubTypes: Hand Pump - Heavy Duty Steel

EP P392E024K

REPAIR KIT
Repair part for lightweight hand pumps

• Type: Service Kit

• Product Group: Pumps
• Product Line: Industrial Tools
• SubTypes: Repair Kit

EP P39K4

REPAIR PARTS KIT
Repair part for steel hand pumps

• Type: Service Kit

• Product Group: Pumps
• Product Line: Industrial Tools
• SubTypes: Repair Kit

EP P84K3

REPAIR KIT
Steel Hand Pumps

• Type: Service Kit

• Product Group: Pumps
• Product Line: Industrial Tools
• SubTypes: Repair Kit

EP P84HDK

REPAIR KIT, HANDLE, P84, ULTIMA
Steel Hand Pumps

• Type: Service Kit

• SubTypes: Handle

EP P39K5

REPAIR KIT, P39, ULTIMA
Steel Hand Pumps

• Type: Service Kit

• Product Group: Pumps
• Product Line: Industrial Tools
• SubTypes: Repair Kit

EP P45138

SCREW
Flow and Pressure Control Valves (V-Series)

• Type: Service Kit

• SubTypes: Screw

EP P77K1

REPAIR KIT, P77, ULTIMA
Steel Hand Pumps

• Type: Service Kit

• Product Group: Pumps
• Product Line: Industrial Tools
• SubTypes: Repair Kit

EP P39RVK

REPAIR KIT, RELEASE VALVE, ULTIMA
Steel Hand Pumps

• Type: Service Kit

• Product Group: Pumps
• Product Line: Industrial Tools
• SubTypes: Valve Assembly

EP P84VRK

ULTIMA P84 VALVE REPAIR KIT
Steel Hand Pumps

• Type: Service Kit

• Product Group: Pumps
• Product Line: Industrial Tools
• SubTypes: Valve Assembly

EP PA1065040

PLUNGER 12KN
Upper Flange Imperial

• Type: Component

EP P50K1

REPAIR KIT
Low Pressure Hand Pumps

• Type: Service Kit

• Product Group: Pumps
• Product Line: Industrial Tools
• Series: P (Service Kit)
• SubTypes: Repair Kit

EP P6012SR

RELEASE VALVE LEVER KIT
Lever Bar

• Type: Service Kit

• SubTypes: Repair Part

EP P6010

SPINDLE
Low Pressure Hand Pumps

• Type: Service Kit

• SubTypes: Spindle Repair Kit

EP P75181

NUT
Foot Operated Pumps

• Type: Service Kit

• SubTypes: Nut

EP P80K8

REPAIR KIT, P80, ULTIMA
Steel Hand Pumps

• Type: Service Kit

• Product Group: Pumps
• Product Line: Industrial Tools
• SubTypes: Repair Kit

EP P60234-1SR

REPAIR KIT
Low Pressure Hand Pumps

• Type: Service Kit

• SubTypes: Repair Part

EP P6012

LEVER
Flow and Pressure Control Valves (V-Series)

• Type: Service Kit

• SubTypes: Repair Part

EP P51K1

REPAIR KIT
Low Pressure Hand Pumps

• Type: Service Kit

• Product Group: Pumps
• Product Line: Industrial Tools
• Series: P (Service Kit)
• SubTypes: Repair Kit

EP P80K4

REP KIT UNIVERSAL SER# BC OR D
Repair part for steel hand pumps

• Type: Service Kit

• Product Group: Pumps
• Product Line: Industrial Tools
• SubTypes: Repair Kit

EP P45139

WASHER
Flow and Pressure Control Valves (V-Series)

• Type: Service Kit

• SubTypes: Washer

EP P51

Single Speed, Low Pressure Hydraulic Hand Pump, 50 in3 Usable Oil

These Low-Pressure Hydraulic Hand Pumps are durable, portable, highly efficient, and easy to use. Each model in the series features an all-steel construction, a chrome plated plunger, and a wiper system for long-lasting performance.

These pumps are constructed to power a wide range of single acting cylinders and tools in space restricted areas. The range includes the P51 that can be operated in the horizontal orientation only, and others also capable of operating in the vertical orientations: P18 with the pump head facing down, P25, P50 with the pump head facing up. Each is protected by external load-release valves and internal overload pressure-relief valves.

With a choice of oil capacities up to 200 in3 (3,277 cm3), and operating pressures of 2,500 psi (175 bar) - 5,000 psi (350 bar) you will find an Enerpac Low Pressure Hydraulic Hand Pump to suit your needs.

• Type: Hydraulic Pump
• Max Bar: 200
• Max PSI: 3000

• Product Group: Pumps
• Product Line: Industrial Tools, Work Holding Tools
• Series: P
• SubTypes: Hand Pump - Single Speed

• External load-release valve
• Internal pressure-relief valve for overload protection
• P51 for horizontal operation only

• Spare Part(s): CJ589950W, P181190W, P51K1

EP P6011

NUT
Low Pressure Hand Pumps

• Type: Service Kit

• SubTypes: Nut

EP P80SFK

REPAIR KIT, SAFETY RELIEF VALVE, ULTIMA
Repair part for steel hand pumps

• Type: Service Kit

• Product Group: Pumps
• Product Line: Industrial Tools
• SubTypes: Valve Repair Kit

EP P75266-1

RESERVOIR CAP
Foot Operated Pumps

• Type: Service Kit

• SubTypes: Reservoir Assembly

EP P464

Two Speed, ULTIMA Steel Hydraulic Hand Pump, 453 in3 Usable Oil, For use with Double-Acting Cylinders

Ultima Steel Hand Pumps are durable, portable, and highly efficient. Each model in the series features an all-steel construction, a chrome plated plunger, and a wiper system for long-lasting performance.

All except the P39 are 2 stage pumps, which reduces the number of handle strokes by as much as 78% compared to a single speed pump. This is ideal for applications when high flow is needed at the first stage, (such as when advancing a cylinder to the point of load contact). The pump switches automatically to the second stage which is the low flow high-pressure stage.

With a choice of oil capacities up to 453 in3 (7423 cm3), you will find Ultima Steel Hand Pumps that can handle multiple cylinder hook-ups, including models to suit either single-acting and double-acting cylinders.

• Type: Hydraulic Pump
• Max Bar: 700
• Max PSI: 10000

• Product Group: Pumps
• Product Line: Industrial Tools
• Series: P
• SubTypes: Hand Pump - Two Speed

• Reduced handle effort and ergonomic grip for less operator fatigue
• Vent free reservoir eliminates spills
• Quick grip handle allows for easy transport
• Integral reservoir over-pressurization protection

• Spare Part(s): P462K2, P462K3