ENERPAC S100272

EP G953107

ROD BEARING
Single-Acting Cylinders (RC-Series and equivalent)

• Type: Service Kit

• SubTypes: Rod Bearing

EP G836028

SCREW
Single-Acting Cylinders (RC-Series and equivalent)

• Type: Service Kit

• SubTypes: Screw

EP G586900SR-10750

SAFETY VALVE ASSY
Double-Acting Long-Stroke Cylinders (RR-Series and equivalent)

• Type: Service Kit

• SubTypes: Safety Valve

EP G385044

STOP RING
Single-Acting Cylinders (RC-Series and equivalent)

• Type: Service Kit

• SubTypes: Stop Ring

EP G4039L

Hydraulic Pressure Gauge, 4.0 in. Face, Lower Mount, Glycerine Filled, 10,000 maximum psi

This G-Series Liquid Filled Pressure Gauge contains glycerin to protect pressure sensing parts from vibration, sudden pressure changes, and moisture.

The dual scale face shows both psi and bar readings, and the extensive range includes a wide selection of models with maximum working pressures ranging from 100 to 15000 psi (7 to 1000 bar).

When using your gauges for high-cycle applications, we recommend using gauge snubbers or needle valves.

• Type: Gauge
• Max Bar: 700
• Max PSI: 10000

• Product Group: Gauges, Pumps
• Product Line: Industrial Tools
• Series: G
• SubTypes: Pressure Gauge

• Calibrated in dual scale reading in psi and bar
• All pressure sensing parts sealed and dampened by glycerine for long life
• Includes safety blow-out disk and pressure equalizing membrane
• Gauge snubbers or needle valves recommended for high cycle applications

EP G4088L

Hydraulic Pressure Gauge, 4.0 in. Face, Lower Mount, Glycerine Filled, 10,000 maximum psi

This G-Series Liquid Filled Pressure Gauge contains glycerin to protect pressure sensing parts from vibration, sudden pressure changes, and moisture.

The dual scale face shows both psi and bar readings, and the extensive range includes a wide selection of models with maximum working pressures ranging from 100 to 15000 psi (7 to 1000 bar).

When using your gauges for high-cycle applications, we recommend using gauge snubbers or needle valves.

• Type: Gauge
• Max Bar: 700
• Max PSI: 10000

• Product Group: Gauges, Pumps
• Product Line: Industrial Tools
• Series: G
• SubTypes: Pressure Gauge

• Calibrated in dual scale reading in psi and bar
• All pressure sensing parts sealed and dampened by glycerine for long life
• Includes safety blow-out disk and pressure equalizing membrane
• Gauge snubbers or needle valves recommended for high cycle applications

EP G830040

PLUNGER REF DWG 941C BOM
Bead Breakers

• Type: Service Kit

• SubTypes: Plunger

EP G382107

BEARING
Single-Acting Cylinders (RC-Series and equivalent)

• Type: Service Kit

• SubTypes: Bearing Kit

EP G2536L

Hydraulic Pressure Gauge, 2.50 in. Face, Lower Mount, Glycerine Filled, 15,000 maximum psi

This G-Series Liquid Filled Pressure Gauge contains glycerin to protect pressure sensing parts from vibration, sudden pressure changes, and moisture.

The dual scale face shows both psi and bar readings, and the extensive range includes a wide selection of models with maximum working pressures ranging from 100 to 15000 psi (7 to 1000 bar).

When using your gauges for high-cycle applications, we recommend using gauge snubbers or needle valves.

• Type: Gauge
• Max Bar: 1000
• Max PSI: 15000

• Product Group: Gauges, Pumps
• Product Line: Industrial Tools, Work Holding Tools
• Series: G
• SubTypes: Pressure Gauge

• Calibrated in dual scale reading in psi and bar
• All pressure sensing parts sealed and dampened by glycerine for long life
• Includes safety blow-out disk and pressure equalizing membrane
• Gauge snubbers or needle valves recommended for high cycle applications

EP G2537R

Hydraulic Pressure Gauge, 2.50 in. Face, Center Rear Mount, Glycerine Filled, 10,000 maximum psi

This G-Series Liquid Filled Pressure Gauge contains glycerin to protect pressure sensing parts from vibration, sudden pressure changes, and moisture.

The dual scale face shows both psi and bar readings, and the extensive range includes a wide selection of models with maximum working pressures ranging from 100 to 15000 psi (7 to 1000 bar).

When using your gauges for high-cycle applications, we recommend using gauge snubbers or needle valves.

• Type: Gauge
• Max Bar: 700
• Max PSI: 10000

• Product Group: Gauges, Pumps
• Product Line: Industrial Tools, Work Holding Tools
• Series: G
• SubTypes: Pressure Gauge

• Calibrated in dual scale reading in psi and bar
• All pressure sensing parts sealed and dampened by glycerine for long life
• Includes safety blow-out disk and pressure equalizing membrane
• Gauge snubbers or needle valves recommended for high cycle applications

EP G898107

Bearing
Single-Acting Cylinders (RC-Series and equivalent)

• Type: Service Kit

• SubTypes: Bearing Kit

EP G2534R

Hydraulic Pressure Gauge, 2.50 in. Face, Center Rear Mount, Glycerine Filled, 6,000 maximum psi

This G-Series Liquid Filled Pressure Gauge contains glycerin to protect pressure sensing parts from vibration, sudden pressure changes, and moisture.

The dual scale face shows both psi and bar readings, and the extensive range includes a wide selection of models with maximum working pressures ranging from 100 to 15000 psi (7 to 1000 bar).

When using your gauges for high-cycle applications, we recommend using gauge snubbers or needle valves.

• Type: Gauge
• Max Bar: 400
• Max PSI: 6000

• Product Group: Gauges, Pumps
• Product Line: Industrial Tools, Work Holding Tools
• Series: G
• SubTypes: Pressure Gauge

• Calibrated in dual scale reading in psi and bar
• All pressure sensing parts sealed and dampened by glycerine for long life
• Includes safety blow-out disk and pressure equalizing membrane
• Gauge snubbers or needle valves recommended for high cycle applications

EP G899044

RING
Single-Acting Cylinders (RC-Series and equivalent)

• Type: Service Kit

• SubTypes: Ring

EP GA4

Gauge Adaptor, 1/2 in. NPT Gauge Port, 10,000 psi

• Type: Gauge Accessory
• Max Bar: 700
• Max PSI: 10000

• Product Group: Gauges, Pumps
• Product Line: Industrial Tools, Work Holding Tools
• Series: GA
• SubTypes: Gauge Adaptor

• For easy mounting of a pressure gauge into your system
• Male end screws into pump or cylinder port, female end accepts hose or coupler, third port is for gauge connection
• Simplifies gauge installation and reading

EP GF510P

Hydraulic Force and Pressure Gauge, Imperial Scale, for use with 50 and 100 ton Cylinders

GF-Series gauges are calibrated with dual scales for reading for pressure and force.

The force readings allow you to measure external loads, such as those supported by a cylinder or jack, or the force used for pressing parts.

The glycerin within the gauge protects pressure sensing parts from vibration, sudden changes in pressure and from moisture.

The GF-Series Gauges feature a 4” (100 mm) diameter face for easy readability, and a stainless-steel casing for corrosion resistance.

• Type: Gauge
• Max Bar: 700
• Max PSI: 10000

• Product Group: Gauges, Pumps
• Product Line: Industrial Tools
• Series: GF
• SubTypes: Force and Pressure Gauge

• Excellent readability; 4 inch diameter gauge face.
• Fast, easy installation
• Stainless steel gauge cases for corrosion resistance
• Calibrated with dual scale reading for psi and bar

EP GF813B

Hydraulic Force and Pressure Gauge, Metric Scale, for use with 20, 30, and 60 ton Cylinders

GF-Series gauges are calibrated with dual scales for reading for pressure and force.

The force readings allow you to measure external loads, such as those supported by a cylinder or jack, or the force used for pressing parts.

The glycerin within the gauge protects pressure sensing parts from vibration, sudden changes in pressure and from moisture.

The GF-Series Gauges feature a 4” (100 mm) diameter face for easy readability, and a stainless-steel casing for corrosion resistance.

• Type: Gauge
• Max Bar: 700
• Max PSI: 10000

• Product Group: Gauges, Pumps
• Product Line: Industrial Tools
• Series: GF
• SubTypes: Force and Pressure Gauge

• Excellent readability; 4 inch diameter gauge face.
• Fast, easy installation
• Stainless steel gauge cases for corrosion resistance
• Calibrated with dual scale reading for psi and bar

EP H7230

30 ft., Thermo-plastic High Pressure Hydraulic Hose, .25 in. Internal Diameter

H700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.

Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.

Diameters available 0.25 and 0.38 (6.4 and 9.7mm), and connection types include 1/4 NPTF 3/8 NPTF and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H700
• SubTypes: Thermo-plastic Hose

• For demanding applications, featuring a 4:1 safety factor
• Maximum working pressure of 10,000 psi
• Outside jacket is polyurethane, to provide maximum abrasion resistance
• Exhibits low volumetric expansion under pressure to enhance overall system efficiency
• Vinyl strain relief guard on both ends of hose to improve life and durability on all models.

EP H7350

50 ft., Thermo-plastic High Pressure Hydraulic Hose, .38 in. Internal Diameter

H700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.

Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.

Diameters available 0.25 and 0.38 (6.4 and 9.7mm), and connection types include 1/4 NPTF 3/8 NPTF and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H700
• SubTypes: Thermo-plastic Hose

• For demanding applications, featuring a 4:1 safety factor
• Maximum working pressure of 10,000 psi
• Outside jacket is polyurethane, to provide maximum abrasion resistance
• Exhibits low volumetric expansion under pressure to enhance overall system efficiency
• Vinyl strain relief guard on both ends of hose to improve life and durability on all models.

EP H7250

50 ft., Thermo-plastic High Pressure Hydraulic Hose, .25 in. Internal Diameter

H700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.

Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.

Diameters available 0.25 and 0.38 (6.4 and 9.7mm), and connection types include 1/4 NPTF 3/8 NPTF and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H700
• SubTypes: Thermo-plastic Hose

• For demanding applications, featuring a 4:1 safety factor
• Maximum working pressure of 10,000 psi
• Outside jacket is polyurethane, to provide maximum abrasion resistance
• Exhibits low volumetric expansion under pressure to enhance overall system efficiency
• Vinyl strain relief guard on both ends of hose to improve life and durability on all models.

EP H9203

3 ft., Heavy-duty Rubber High Pressure Hydraulic Hose, .25 in. Internal Diameter

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low &lsquo

EP H9206

6 ft., Heavy-duty Rubber High Pressure Hydraulic Hose, .25 in. Internal Diameter

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low &lsquo

EP H9206Q

6 ft., Heavy-duty Rubber High Pressure Hydraulic Hose, .25 in. Internal Diameter

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low &lsquo

EP H9206S

6 ft., Heavy-duty Rubber High Pressure Hydraulic Hose, .25 in. Internal Diameter

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low &lsquo

EP H9250

50 ft., Heavy-duty Rubber High Pressure Hydraulic Hose, .25 in. Internal Diameter

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low &lsquo

EP H9350

50 ft., Heavy-duty Rubber High Pressure Hydraulic Hose, .38 in. Internal Diameter

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low &lsquo

EP HA20

20 ft (6,1 m) Industrial Grade High Pressure Hydraulic Hose, 0.25 in (6,4 mm) Internal Diameter
HA Industrial Grade .25 (6,4 mm) I.D. series hoses are rated at 10,000 psi (700 bar) operating pressure and 20,000 psi (1380 bar) minimum burst pressure. This hoseis the recommended choice for hand pump & cylinder sets, as well as a wide range of other intermittent applications.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Line: Hydraulic Tools
• Series: HA
• SubTypes: Industrial Grade Hose

EP HA7210

10 ft., Thermo-plastic High Pressure Hydraulic Hose, .25 in. Internal Diameter

H700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.

Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H700
• SubTypes: Thermo-plastic Hose

• For demanding applications, featuring a 4:1 safety factor
• Maximum working pressure of 10,000 psi
• Outside jacket is polyurethane, to provide maximum abrasion resistance
• Exhibits low volumetric expansion under pressure to enhance overall system efficiency
• Vinyl strain relief guard on both ends of hose to improve life and durability on all models.

EP HB7206

6 ft., Thermo-plastic High Pressure Hydraulic Hose, .25 in. Internal Diameter

H700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.

Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.

Diameters available 0.25 and 0.38 (6.4 and 9.7mm), and connection types include 1/4 NPTF 3/8 NPTF and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H700
• SubTypes: Thermo-plastic Hose

• For demanding applications, featuring a 4:1 safety factor
• Maximum working pressure of 10,000 psi
• Outside jacket is polyurethane, to provide maximum abrasion resistance
• Exhibits low volumetric expansion under pressure to enhance overall system efficiency
• Vinyl strain relief guard on both ends of hose to improve life and durability on all models.

EP HB7206QB

6 ft., Thermo-Plastic High Pressure Hydraulic Hose, .25 in. Internal Diameter

H700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.

Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.

Diameters available 0.25 and 0.38 (6.4 and 9.7mm), and connection types include 1/4 NPTF 3/8 NPTF and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H700
• SubTypes: Thermo-plastic Hose

• For demanding applications, featuring a 4:1 safety factor
• Maximum working pressure of 10,000 psi
• Outside jacket is polyurethane, to provide maximum abrasion resistance
• Exhibits low volumetric expansion under pressure to enhance overall system efficiency
• Vinyl strain relief guard on both ends of hose to improve life and durability on all models.

EP HC7206B

6 ft., Thermo-plastic High Pressure Hydraulic Hose, .25 in. Internal Diameter

H700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.

Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.

Diameters available 0.25 and 0.38 (6.4 and 9.7mm), and connection types include 1/4 NPTF 3/8 NPTF and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H700
• SubTypes: Thermo-plastic Hose

• For demanding applications, featuring a 4:1 safety factor
• Maximum working pressure of 10,000 psi
• Outside jacket is polyurethane, to provide maximum abrasion resistance
• Exhibits low volumetric expansion under pressure to enhance overall system efficiency
• Vinyl strain relief guard on both ends of hose to improve life and durability on all models.

EP HC7210B

10 ft., Thermo-plastic High Pressure Hydraulic Hose, .25 in. Internal Diameter

H700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.

Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H700
• SubTypes: Thermo-plastic Hose

• For demanding applications, featuring a 4:1 safety factor
• Maximum working pressure of 10,000 psi
• Outside jacket is polyurethane, to provide maximum abrasion resistance
• Exhibits low volumetric expansion under pressure to enhance overall system efficiency
• Vinyl strain relief guard on both ends of hose to improve life and durability on all models.

EP HC7250C

50 ft., Thermo-plastic High Pressure Hydraulic Hose, .25 in. Internal Diameter

H700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.

Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.

Diameters available 0.25 and 0.38 (6.4 and 9.7mm), and connection types include 1/4 NPTF 3/8 NPTF and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H700
• SubTypes: Thermo-plastic Hose

• For demanding applications, featuring a 4:1 safety factor
• Maximum working pressure of 10,000 psi
• Outside jacket is polyurethane, to provide maximum abrasion resistance
• Exhibits low volumetric expansion under pressure to enhance overall system efficiency
• Vinyl strain relief guard on both ends of hose to improve life and durability on all models.

EP HC9206

6 ft., Heavy-duty Rubber High Pressure Hydraulic Hose, .25 in. Internal Diameter

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low &lsquo

EP HC7320C

HOSE 20FT CH604 +CH604
Thermo-Plastic Hoses (700-Series)

• Type: Hose

• Product Group: Hoses, Pumps

EP HC9206B

6 ft., Heavy-duty Rubber High Pressure Hydraulic Hose, .25 in. Internal Diameter

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low &lsquo

EP HC9220C

20 FT Hose w/CH604 + CH604 Couplers

• Type: Component

• Product Line: Industrial Tools
• SubTypes: Heavy-duty Rubber Hose

EP HC9250C

50 ft., Heavy-duty Rubber High Pressure Hydraulic Hose, .25 in. Internal Diameter

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low &lsquo

EP HC9306

6 ft., Heavy-duty Rubber High Pressure Hydraulic Hose, .38 in. Internal Diameter

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low &lsquo

EP HCA6

6 ft (1,8 m) Industrial Grade High Pressure Hydraulic Hose, 0.25 in (6,4 mm) Internal Diameter
HCA Industrial Grade .25 (6,4 mm) I.D. series hoses are rated at 10,000 psi (700 bar) operating pressure and 20,000 psi (1380 bar) minimum burst pressure. This hoseis the recommended choice for hand pump & cylinder sets, as well as a wide range of other intermittent applications. All hoses with couplers includes CR215 Dust Cap.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Line: Hydraulic Tools
• Series: HCA
• SubTypes: Industrial Grade Hose

EP HCL100K

SEAL KIT HCL100
Single-Acting Locknut Cylinders (CLL, HCL-Series and equivalent)

• Type: Service Kit

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• SubTypes: Seal Kit

EP HCL50008

LOCK NUT HCL 50 TON
Single-Acting Locknut Cylinders (CLL, HCL-Series and equivalent)

• Type: Component

• SubTypes: Lock Nut

EP HC9220

20 ft., Heavy-duty Rubber High Pressure Hydraulic Hose, .25 in. Internal Diameter

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low &lsquo

EP HC9210C

10 ft., Heavy-duty Rubber High Pressure Hydraulic Hose, .25 in. Internal Diameter, with CH604 Coupler

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility needed for long hose runs.

Each hose contains two layers of steel wire braids covered by a rubber sleeve to ensure a long life in tough working environments.

Internal diameters available are 0.25 and 0.38 inch (6.4 and 9.7mm). Connection types available are 1/4 inch NPTF, 3/8 inch NPTF, and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps improve durability and hose life.

• Type: Hose
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H900
• SubTypes: Heavy-duty Rubber Hose

• Crimped-on rubber strain relief for improved life and durability
• Maximum working pressure of 10,000 psi
• Rubber coated with two layers of steel wire braids
• Designed to comply with Material Handling Institute IJ-100 hose specification
• Flexible, with little memory, is the best choice for long hose runs

EP HCG1004

113 ton Capacity, 3.94 in Stroke, Single-Acting, High Tonnage Hydraulic Cylinder

HCG Series Hydraulic Cylinders are the single-acting load return option from the industry-proven Enerpac high-tonnage range.

As with all of our high-tonnage cylinders, included are a multitude of special features inside and out, to deliver the increased levels of durability, safety, and performance vital for large-scale construction projects. Among these features are low-wear high pressure seals, replaceable composite plunger support bearings, and a tough nitrocarburized finish on the cylinder body and the plunger.

Applications: Lift, Push

• Type: Hydraulic Cylinders
• Max Bar: 700
• Max PSI: 10150

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: HCG
• Stroke Inches: 3.94
• Stroke MM: 100
• SubTypes: High Tonnage Cylinder

• Load return plunger - simple to use and fewer components to maintain
• Nitrocarburized finish - resists side-loading and cyclic wear
• 10% resistance to side-load over the full cylinder stroke
• Stop-ring prevents plunger blow-out
• Weather protected, inside and out
• Upper and lower replaceable bearings support the plunger throughout the stroke
• Certified lifting eyes
• Base mounting holes
• Collar threads included on models up to 250 ton. Optional on 300 ton and higher.
• Maximum working pressure up to 10,000 psi (700 bar)
• Complies to ASME B30.1

• Spare Part(s): HCG100K1
• Accessories: CATS101, CHM6

EP HCR2002

223 ton Capacity, 1.97 in Stroke, Double-Acting, High Tonnage Hydraulic Cylinder

HCR Series Hydraulic Cylinders are double-acting which delivers a faster and more controlled return of the plunger compared to load/gravity return equivalents.

Enerpac High-Tonnage Cylinders are equipped with numerous special features to ensure the durability, safety, and performance needed for large-scale construction projects. Among these features are low-wear high-pressure seals, replaceable composite plunger support bearings, and a robust nitrocarburized finish on both the body and plunger.

Applications: Lift, Lower, Push

• Type: Hydraulic Cylinders
• Max Bar: 700
• Max PSI: 10150

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: HCR
• Stroke Inches: 1.97
• Stroke MM: 50
• SubTypes: High Tonnage Cylinder

• Double-acting for fast and controlled advance and retract
• Nitrocarburized surface resists side-loading and cyclic wear
• 10% side-load resistance over full cylinder stroke
• Weather protected, inside and out
• Upper and lower replaceable bearings support the plunger throughout the stroke
• Certified lifting eyes
• Base mounting holes
• Collar threads included on models up to 250 ton. Optional on 300 ton and higher.
• Maximum working pressure up to 10,000 psi (700 bar)
• Complies to ASME B30.1

• Spare Part(s): HCR200K1
• Accessories: CATS200

EP HCR2006

223 ton Capacity, 5.91 in Stroke, Double-Acting, High Tonnage Hydraulic Cylinder

HCR Series Hydraulic Cylinders are double-acting which delivers a faster and more controlled return of the plunger compared to load/gravity return equivalents.

Enerpac High-Tonnage Cylinders are equipped with numerous special features to ensure the durability, safety, and performance needed for large-scale construction projects. Among these features are low-wear high-pressure seals, replaceable composite plunger support bearings, and a robust nitrocarburized finish on both the body and plunger.

Applications: Lift, Lower, Push

• Type: Hydraulic Cylinders
• Max Bar: 700
• Max PSI: 10150

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: HCR
• Stroke Inches: 5.91
• Stroke MM: 150
• SubTypes: High Tonnage Cylinder

• Double-acting for fast and controlled advance and retract
• Nitrocarburized surface resists side-loading and cyclic wear
• 10% side-load resistance over full cylinder stroke
• Weather protected, inside and out
• Upper and lower replaceable bearings support the plunger throughout the stroke
• Certified lifting eyes
• Base mounting holes
• Collar threads included on models up to 250 ton. Optional on 300 ton and higher.
• Maximum working pressure up to 10,000 psi (700 bar)
• Complies to ASME B30.1

• Spare Part(s): HCR200K1
• Accessories: CATS200

EP HCL50K

SEAL KIT HCL50
Single-Acting Locknut Cylinders (CLL, HCL-Series and equivalent)

• Type: Service Kit

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• SubTypes: Seal Kit

EP HF101

1 Gallon, HF Hydraulic Oil for Powered Pumps

The Enerpac HF-series Hydraulic Oil is specially formulated for powered hydraulic pumps. The HF-series oil contains anti-sludge, anti-rust, and anti-foam additives for overall superior performance. The HF-series hydraulic oil prevents cavitation and offers maximum volumetric efficiency and maximum heat transfer.

The HF-series oil is not for use in hand pumps. Use the Enerpac LX-Series Oil for hand powered pumps.

Offered in 1 quart, 1 gallon, 5 gallon and 55-gallon sizes. The HF-series hydraulic oil has a viscosity index of 100 min.

• Type: Hydraulic Oil

• Product Group: Pumps
• Product Line: Industrial Tools, Work Holding Tools, Bolting Tools
• Series: HF
• SubTypes: Oil

• Specially formulated for power pumps
  • maximum volumetric efficiency
  • maximum heat transfer
  • prevents cavitation
  • anti-sludge, anti-rust, anti-foam additives
• Maximum film protective lubricity
  • anti-oxidation additives
• High viscosity index ensures maximum lubricity over a wide range of operation temperatures.

EP HCRL1006

111.2 ton Capacity, 5.91 in Stroke, Double-Acting, High Tonnage, Lock Nut Hydraulic Cylinder

HCRL Series High Tonnage Hydraulic Cylinders feature a lock nut to provide mechanical load holding for extended periods of time. These double-acting cylinders use hydraulic force to deliver a faster and more controlled return of the plunger than load/gravity return equivalents. Tilt saddles are provided as standard on all HCRL cylinders which allow up to 5 degrees of load misalignment.

All Enerpac High-Tonnage Cylinders are equipped with numerous special features to ensure the durability, safety, and performance needed for large-scale construction projects. Among these features are low-wear high-pressure seals, replaceable composite plunger support bearings, and a robust nitrocarburized finish on both the body and plunger.

Applications: Lift, Push, Hold

• Type: Hydraulic Cylinders
• Max Bar: 700
• Max PSI: 10150

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: HCRL
• Stroke Inches: 5.91
• Stroke MM: 150
• SubTypes: High Tonnage Lock Nut Cylinder

• Ensures safety by providing mechanical load holding for extended periods
• Low friction lock nut spins easily, saving time and effort
• Double acting hydraulic return for fast advance and retract
• Integrated tilt saddle allows up to 5 degrees of misalignment
• Nitrocarburized surface resists side-loading and cyclic wear
• 10% side-load resistance over full cylinder stroke
• Stop-ring prevents plunger blow-out
• Weather protected, inside and out
• Upper and lower replaceable bearings support the plunger throughout the stroke
• Certified lifting eyes
• Base mounting holes and collar thread included as standard.
• HCRL-Series Cylinders are available with up to 1000-ton capacity and 24-inch stroke upon request.
• Maximum working pressure up to 10,000 psi (700 bar)
• Complies to ASME B30.1

• Accessories: CHM6

EP HF102

5 Gallons, HF Hydraulic Oil for Powered Pumps

The Enerpac HF-series Hydraulic Oil is specially formulated for powered hydraulic pumps. The HF-series oil contains anti-sludge, anti-rust, and anti-foam additives for overall superior performance. The HF-series hydraulic oil prevents cavitation and offers maximum volumetric efficiency and maximum heat transfer.

The HF-series oil is not for use in hand pumps. Use the Enerpac LX-Series Oil for hand powered pumps.

Offered in 1 quart, 1 gallon, 5 gallon and 55-gallon sizes. The HF-series hydraulic oil has a viscosity index of 100 min.

• Type: Hydraulic Oil

• Product Group: Pumps
• Product Line: Industrial Tools, Work Holding Tools, Bolting Tools
• Series: HF
• SubTypes: Oil

• Specially formulated for power pumps
  • maximum volumetric efficiency
  • maximum heat transfer
  • prevents cavitation
  • anti-sludge, anti-rust, anti-foam additives
• Maximum film protective lubricity
  • anti-oxidation additives
• High viscosity index ensures maximum lubricity over a wide range of operation temperatures.

EP HF104

55 Gallons, HF Hydraulic Oil for Powered Pumps

The Enerpac HF-series Hydraulic Oil is specially formulated for powered hydraulic pumps. The HF-series oil contains anti-sludge, anti-rust, and anti-foam additives for overall superior performance. The HF-series hydraulic oil prevents cavitation and offers maximum volumetric efficiency and maximum heat transfer.

The HF-series oil is not for use in hand pumps. Use the Enerpac LX-Series Oil for hand powered pumps.

Offered in 1 quart, 1 gallon, 5 gallon and 55-gallon sizes. The HF-series hydraulic oil has a viscosity index of 100 min.

• Type: Hydraulic Oil

• Product Group: Pumps
• Product Line: Industrial Tools, Work Holding Tools, Bolting Tools
• Series: HF
• SubTypes: Oil

• Specially formulated for power pumps
  • maximum volumetric efficiency
  • maximum heat transfer
  • prevents cavitation
  • anti-sludge, anti-rust, anti-foam additives
• Maximum film protective lubricity
  • anti-oxidation additives
• High viscosity index ensures maximum lubricity over a wide range of operation temperatures.

EP HLP3113

HMT3500 Imperial or Metric Cassette, 1 13/16 in. / 46 mm Hexagon AF Size

This low-profile hexagon cassette works with compatible HMT-Series modular drive units. The low-profile design with an optimum nose radius provides the access needed for hassle-free bolting in tight spaces.

ATEX declared. Calibration certificate included. All HLP cassettes are CE - ATEX declared and are shipped complete with a calibration certificate.

For heavy use and enduring durability, each HLP-Series cassette is constructed from robust steel, and the fast release mechanism allows rapid exchange of cassettes with no other tools required.

HLP-Series Cassettes offer the reassurance of ATEX certification to ensure they meet the necessary safety standards within potentially explosive environments.

Applications: Torque

• Type: Torque Wrench

• Product Group: Torque Wrenches, Torque Wrench Pumps
• Product Line: Bolting Tools
• Series: HLP
• SubTypes: Cassette - Imperial or Metric

Supplied with a calibration certificate.
Constant torque output provides accuracy of plus/minus 3% across full stroke.

EP HLP3209

HMT3500 Imperial or Metric Cassette, 2 9/16 in. / 65 mm Hexagon AF Size

This low-profile hexagon cassette works with compatible HMT-Series modular drive units. The low-profile design with an optimum nose radius provides the access needed for hassle-free bolting in tight spaces.

ATEX declared. Calibration certificate included. All HLP cassettes are CE - ATEX declared and are shipped complete with a calibration certificate.

For heavy use and enduring durability, each HLP-Series cassette is constructed from robust steel, and the fast release mechanism allows rapid exchange of cassettes with no other tools required.

HLP-Series Cassettes offer the reassurance of ATEX certification to ensure they meet the necessary safety standards within potentially explosive environments.

Applications: Torque

• Type: Torque Wrench

• Product Group: Torque Wrenches, Torque Wrench Pumps
• Product Line: Bolting Tools
• Series: HLP
• SubTypes: Cassette - Imperial or Metric

Supplied with a calibration certificate.
Constant torque output provides accuracy of plus/minus 3% across full stroke.

EP HLP3215

HMT3500 Imperial or Metric Cassette, 2 15/16 in. / 75 mm Hexagon AF Size

This low-profile hexagon cassette works with compatible HMT-Series modular drive units. The low-profile design with an optimum nose radius provides the access needed for hassle-free bolting in tight spaces.

ATEX declared. Calibration certificate included. All HLP cassettes are CE - ATEX declared and are shipped complete with a calibration certificate.

For heavy use and enduring durability, each HLP-Series cassette is constructed from robust steel, and the fast release mechanism allows rapid exchange of cassettes with no other tools required.

HLP-Series Cassettes offer the reassurance of ATEX certification to ensure they meet the necessary safety standards within potentially explosive environments.

Applications: Torque

• Type: Torque Wrench

• Product Group: Torque Wrenches, Torque Wrench Pumps
• Product Line: Bolting Tools
• Series: HLP
• SubTypes: Cassette - Imperial or Metric

Supplied with a calibration certificate.
Constant torque output provides accuracy of plus/minus 3% across full stroke.

EP HMT3500

Hydraulic Torque Wrench Drive Unit for HLP-Low Profile or HSQ Square Drive cassettes, 3750 ft. lbs Torque

These fast, durable, and efficient modular hydraulic torque wrenches offer the versatility to tackle a vast range of bolting applications - enhancing your inventory of bolting tools in a cost-effective way.

HMT-Series Hydraulic Torque Wrench Drive Units are compatible with HSQ Square Drive Cassettes, HLP Hex Cassettes, and cassettes from other well-known brands. You can interchange cassettes with ease, switching the HLP low profile hexagon cassette to the HSQ square drive whenever your application demands.

HMT tools and cassettes are also interchangeable with many other well-known brands. This means you can use the tools you already own while upgrading to high-quality Enerpac equipment in a cost-effective way.

The HMT drive unit has been carefully designed and manufactured, using superior alloys and surface treatments to make it lightweight, up to 25% faster, and twice as durable as other tools in the same class.

Applications: Torque

• Type: Torque Wrench
• Max Bar: 690
• Max PSI: 10000

• Product Group: Torque Wrenches, Torque Wrench Pumps
• Product Line: Bolting Tools
• Series: HMT
• SubTypes: HMT Drive Unit

Safety and Performance

• Supplied with an ergonomic tool safety handle as standard
• The HMT Modular Torque/Tool is also supplied with a link pin retainer as standard.

Versatility

• Interchangeable with other manufacturers
• HMT can meet all of your bolting challenges quickly and safely, with one or more attachment options, making it suitable for any application.

Simplicity

• An HMT Torque Wrench is modular system, made up of a single HMT Drive Unit and one attachment: a HLP Hexagon cassette or a HSQ Square Drive Cassette

Accuracy

• Constant torque output provides accuracy of +/- 3% across full stroke.

ATEX certified

• All HMT tools are CE - ATEX certified

Use Enerpac THQ700 Series hoses with HMT-Series torque wrenches to ensure the integrity of your hydraulic system.

Choose your Enerpac Torque Wrench using the untightening rule of thumb: Loosening torque equals about 250% of tightening torque.

Supplied with a calibration certificate

• Set Includes: SWH6A
• Accessories: BUS02, BUS03, BUS04, BUS05, BUS06

EP HP2031

LEG REDUCER KIT
Bearing Cup and Bearing Pullers (BHP-Series)

• Type: Puller Accessory

• Product Group: Pullers

EP HP3015

Threaded Hollow Saddle for Hollow Cylinders
Saddle - Threaded Hollow for Hollow Cylinders

• Type: Cylinder Accessories

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: HP
• SubTypes: Threaded Hollow Saddle

EP HPT1500

Two Speed, High Pressure Hydraulic Hand Pump with Gauge, 21,750 psi

The HPT1500 is a manually operated high-pressure hydraulic tensioner pump in a convenient portable format. With no need for trailing power cords or air hoses, the HPT1500 is ideal for bolt tensioning applications where there is no power source available.

This high-pressure hand pump creates a maximum working pressure of 21,750 psi (1500 bar), and the robust, but lightweight construction provides greater portability than powered tensioner pumps.

To minimize cycle times, the two-speed operation displaces a large volume of oil per stroke at the first stage, and the included pressure gauge keeps you fully informed throughout the process.

Important: These pumps operate at ultra high-pressure, use only the specified fittings and hoses designed for these pressures.

• Type: Hydraulic Pump
• Max Bar: 1500
• Max PSI: 21750

• Product Group: Bolt Tensioner Pumps, Bolt Tensioners
• Product Line: Industrial Tools, Bolting Tools
• Series: HPT
• SubTypes: Hand Pump - Tensioning Pump

• The Enerpac HPT high-pressure Hand Pump is ideally suited for use with hydraulic bolt tensioning tools and hydraulic nuts
• Lightweight and portable high-pressure hand pump
• Two-speed operation displaces a larger volume of oil per stroke, reducing cycle times for many testing applications
• Includes a gauge and coupler for direct connection to GT-Series bolting tools
• Integrated relief valve set at 21,750 psi
• These products operate at ultra-high pressure, use only the specified fittings and hoses designed for these pressures

EP HP2006

LEG, 9 1/2" LONG
Bearing Cup and Bearing Pullers (BHP-Series)

• Type: Puller Accessory

• Product Group: Pullers

EP HP3111

ADJUSTING ROD
Bearing Cup and Bearing Pullers (BHP-Series)

• Type: Service Kit

EP HSQ3500

Square Drive Cassette, 1 in. Square Drive Size

HSQ Square Drive Hydraulic Torque Wrench Cassettes work with compatible HMT-Series drive units, and feature an easy-to-use push button, quick release, reversible square drive.

ATEX declared. Calibration certificate included. All HSQ cassettes are CE - ATEX declared and are shipped complete with a calibration certificate.

With just three completely enclosed moving parts, the HSQ Cassette minimizes pinch points and reduces the need for maintenance.

Provided with each cassette is a fully adjustable 360 degree in-line reaction arm. This attaches around the square drive making it possible to turn the drive unit away from an obstacle.

HSQ-Series Cassettes offer the reassurance of ATEX certification to ensure they meet the necessary safety standards within potentially explosive environments.

Applications: Torque

• Type: Torque Wrench
• Max Bar: 690
• Max PSI: 10000

• Product Group: Torque Wrenches, Torque Wrench Pumps
• Product Line: Bolting Tools
• Series: HSQ
• SubTypes: Square Drive Cassette

Safety and Performance

• Innovative design that completely encloses all moving parts and minimizes pinch points
• Reaction arm supplied as standard
• Fully adjustable 360 degree in-line reaction arm
• Fine tooth ratchet prevents locking-on

Simplicity

• Simple robust design with just three moving parts for reduced maintenance
• Push button, quick release, reversible square drive

Versatility

• The reaction arm, positioned around the square drive instead of the back of the drive unit, provides you with the possibility to turn the drive unit away from an obstacle

Accuracy

• Constant torque output provides accuracy of +/- 3% across full stroke.

ATEX certified

• All HMT tools are CE - ATEX certified

Supplied with a calibration certificate.

IMPORTANT: You will need an HMT-drive unit to operate the HSQ-Square Drive Cassettes which must be ordered separately.

EP HT1510HR

21,750 psi, 9.84 ft., Hydraulic Tensioner Hose

• Type: Hose
• Max Bar: 1500
• Max PSI: 21750

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools, Bolting Tools
• Series: HT
• SubTypes: Tensioner Hose

• 21,750 psi hose
• Includes dust caps
• Can be used for subsea fastening systems
• Hoses can be inter-connected in multi-tool set-ups using nipples, couplers, T-pieces and Y-Pipe assemblies.

• Set Includes: BH150, BR150
• Accessories: BW150AW, B150B, BR150B, BH150B

EP IB1538

20 in. (508,0 mm), 44 lbs (20,0 kg), I-Beam Base for RJ Ratchet Jacks
I - Beam Base

• Type: Jack Accessory

• Product Line: Mechanical Tools
• Series: IB
• SubTypes: I-Beam Base

EP IPA5073

50 Ton, H-Frame Hydraulic Press with RR5013 Double-Acting Cylinder and ZA4408MX Air Pump

• Type: Hydraulic Press
• Max Bar: 700
• Max PSI: 10000

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 50
• Capacity KN: 498

• Quality welded frame for maximum strength and long life
• Exclusive Hydra-Lift bed for effortless adjustment of the vertical daylight (10-ton models are manual)
• Roller head design is standard to allow movement and locking of the cylinder from side to side(10-ton, 25-ton, and 30-ton are manual)
• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package

• Set Includes: RR5013, ZA4408MX, GF50P, HC9306, GA2
• Accessories: PK1002, A150, IPL100

EP IPE10060

100 Ton, H-Frame Hydraulic Press with RR10013 Double-Acting Cylinder and ZE4420SBN Electric Pump

• Type: Hydraulic Press
• Max Bar: 700
• Max PSI: 10000

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 100
• Capacity KN: 933

• Quality welded frame for maximum strength and long life
• Exclusive Hydra-Lift bed for effortless adjustment of the vertical daylight (10-ton models are manual)
• Roller head design is standard to allow movement and locking of the cylinder from side to side(10-ton, 25-ton, and 30-ton are manual)
• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package

• Set Includes: RR10013, ZE4420SB-N, GF871P, HC9306, GA3
• Accessories: PK1002, A175, IPL100

EP IPE1215

10 Ton, H-Frame Hydraulic Press with RC1010 Single-Acting Cylinder and ZE2208MB Electric Pump

• Type: Hydraulic Press
• Max Bar: 700
• Max PSI: 10000

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 10
• Capacity KN: 101

• Quality welded frame for maximum strength and long life
• Exclusive Hydra-Lift bed for effortless adjustment of the vertical daylight (10-ton models are manual)
• Roller head design is standard to allow movement and locking of the cylinder from side to side(10-ton, 25-ton, and 30-ton are manual)
• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package

• Set Includes: RC1010, ZE2208MB, GF10P, HC9306, GA2
• Accessories: IPK1012, A136

EP IPE2510

25 Ton, H-Frame Hydraulic Press with RC2514 Single-Acting Cylinder and ZE3310SBN Electric Pump

• Type: Hydraulic Press
• Max Bar: 700
• Max PSI: 10000

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 25
• Capacity KN: 232

• Quality welded frame for maximum strength and long life
• Exclusive Hydra-Lift bed for effortless adjustment of the vertical daylight (10-ton models are manual)
• Roller head design is standard to allow movement and locking of the cylinder from side to side(10-ton, 25-ton, and 30-ton are manual)
• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package

• Set Includes: RC2514, ZE3310SB-N, GF20P, HC9306, GA2
• Accessories: IPK3012, A130, IPL100

EP IPE5060

50 Ton, H-Frame Hydraulic Press with RR5013 Double-Acting Cylinder and ZE4420SBN Electric Pump

• Type: Hydraulic Press
• Max Bar: 700
• Max PSI: 10000

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 50
• Capacity KN: 498

• Quality welded frame for maximum strength and long life
• Exclusive Hydra-Lift bed for effortless adjustment of the vertical daylight (10-ton models are manual)
• Roller head design is standard to allow movement and locking of the cylinder from side to side(10-ton, 25-ton, and 30-ton are manual)
• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package

• Set Includes: RR5013, ZE4420SB-N, GF50P, HC9306, GA2
• Accessories: PK501, A150, IPL100

EP IPH010S10-1

10 Ton, H-Frame Hydraulic Press with RC1010 Single-Acting Cylinder, no pump and small pump mounting kit
H-Frame Presses (IP-Series)

• Type: Hydraulic Press
• Max PSI: 10000

• Product Group: Presses
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 10

• Set Includes: RC1010, GA2, GF10P, HC9306

EP IPH050D13-2

50 Ton, H-Frame Hydraulic Press with RR5013 Double-Acting Cylinder, no pump and large pump mounting kit
H-Frame Presses (IP-Series)

• Type: Hydraulic Press
• Max PSI: 10000

• Product Group: Presses
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 50

• Set Includes: RR5013, GA2, GF50P, HC9306

EP IPH1240

10 Ton, H-Frame Hydraulic Press with RC1010 Single-Acting Cylinder and P392 Hand Pump

• Type: Hydraulic Press
• Max Bar: 700
• Max PSI: 10000

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 10
• Capacity KN: 101

• Quality welded frame for maximum strength and long life
• Exclusive Hydra-Lift bed for effortless adjustment of the vertical daylight (10-ton models are manual)
• Roller head design is standard to allow movement and locking of the cylinder from side to side(10-ton, 25-ton, and 30-ton are manual)
• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package

• Set Includes: RC1010, P392, GF10P, HC9306, GA2
• Accessories: IPK1012, A136

EP IPH2531

25 Ton, H-Frame Hydraulic Press with RC2514 Single-Acting Cylinder and P80 Hand Pump

• Type: Hydraulic Press
• Max Bar: 700
• Max PSI: 10000

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 25
• Capacity KN: 232

• Quality welded frame for maximum strength and long life
• Exclusive Hydra-Lift bed for effortless adjustment of the vertical daylight (10-ton models are manual)
• Roller head design is standard to allow movement and locking of the cylinder from side to side(10-ton, 25-ton, and 30-ton are manual)
• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package

• Set Includes: RC2514, P80, GF20P, HC9306, GA2
• Accessories: IPK3012, A130, IPL100

EP IPL100-PLUK

Kit, Plunger
H-Frame Presses (IP-Series)

• Type: Service Kit

• SubTypes: Plunger Kit

EP IPH100D13-2

100 Ton, H-Frame Hydraulic Press with RR10013 Double-Acting Cylinder, no pump and large pump mounting kit
H-Frame Presses (IP-Series)

• Type: Hydraulic Press
• Max PSI: 10000

• Product Group: Presses
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 100

• Set Includes: RR10013, GA3, GF871P, HC9306

EP IPL100-SEAK

Kit, Seal
H-Frame Presses (IP-Series)

• Type: Service Kit

• SubTypes: Repair Part

EP IPLR100

Hydra-Lift for Daylight Adjustments, For 50 and 100 ton Roll Frame Presses

• Type: Press Accessory

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IPL
• SubTypes: Press Hydra-Lift

• Capacity Imperial Tons: 100

• Allows easy, effortless daylight adjustment.
• Includes accessory chain

EP JBI10

Base Plate for 10 ton Cylinders
Base Plate

• Type: Cylinder Accessories

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: JBI
• SubTypes: Base Plate

EP JBI25

Base Plate for 25 ton Cylinders
Base Plate

• Type: Cylinder Accessories

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: JBI
• SubTypes: Base Plate

EP JHA1506K2

150 Ton Jack Kit
Steel Jacks (JH-Series)

• Type: Service Kit

• SubTypes: Repair Part

EP JHA73K

REPAIR KIT
Aluminum Jacks (JHA-Series)

• Type: Service Kit

• SubTypes: Repair Part

EP JJ2510C

Super Jacks, 25 ton (222,4 kN) Capacity, 5 in (127 mm) Stroke, Steel Jack Housing

• Ratcheting screw jack design.
• Holds the load indefinitely, and will not creep down.
• Positive shoulder stop for safety.
• Available with aluminum or ductile iron housing.
• Ball bearings for smooth operation and low handle effort.
• Raise or lower the load precisely with the reversal ratchet socket with quick spin handle.
• CE Compliant - Our Jack design specifications meet or exceed ANSI /ASME B30.1 Safety Standards.

• Type: Jack

• Product Line: Mechanical Tools
• Series: JJ
• Stroke Inches: 5
• Stroke MM: 127
• SubTypes: Super Jacks

• Capacity Imperial Tons: 25
• Capacity KN: 222,4

• Accessories: SLB36

EP K1044

RING
Wedgie and Spread Cylinders (A and WR-Series)

• Type: Service Kit

• SubTypes: Ring

EP L119110SR

SPRING ASM
Enerpac Fasteners

• Type: Service Kit

• SubTypes: Spring Kit

EP K53028

SCREW
Single-Acting Cylinders (RC-Series and equivalent)

• Type: Service Kit

• SubTypes: Screw

EP L345045

SADDLE
Single-Acting Cylinders (RC-Series and equivalent)

• Type: Service Kit

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• SubTypes: Saddle Kit

EP L347040

PLUNGER REF DWG 501 BOM
Single-Acting Cylinders (RC-Series and equivalent)

• Type: Service Kit

• SubTypes: Plunger Kit

EP L661028

SCREW
Single-Acting Cylinders (RC-Series and equivalent)

• Type: Service Kit

• SubTypes: Screw

EP L748900SR

SADDLE

• Type: ERP

• SubTypes: Saddle Kit

EP LGH314

14 Ton, 3 Jaw, Hydraulic Lock-Grip Puller with RWH121 Hydraulic Cylinder
Applications: Pull

• Type: Puller
• Max PSI: 10150

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGH
• SubTypes: Lock-Grip Puller Hydraulic

• Capacity Imperial Tons: 14
• Capacity KN: 125

• LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 10,150 psi hydraulic cylinder.
• Quickly and easily mount on a wide range of applications
• Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: RWH121, FZ1065, LGH14K6

EP LGH310

10 Ton, 3 Jaw, Hydraulic Lock-Grip Puller with Hydraulic Cylinder
Applications: Pull

• Type: Puller
• Max PSI: 10150

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGH
• SubTypes: Lock-Grip Puller Hydraulic

• Capacity Imperial Tons: 10
• Capacity KN: 92

• LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 10,150 psi hydraulic cylinder.
• Quickly and easily mount on a wide range of applications
• Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0704

EP LGHMS310EB

10 Ton, 3 Jaw, Hydraulic Lock-Grip Master Puller Set with Electric Pump, 115V
Applications: Pull

• Type: Puller
• Max PSI: 10150

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGHMS
• SubTypes: Lock-Grip Master Puller Sets

• Capacity Imperial Tons: 10
• Capacity KN: 92

• All LGHMS-Series Master Puller Sets include an LGH-Series Puller, a Cross Puller, a Bearing Separator, a Bearing Cup Puller, a detachable Hollow Cylinder, a hose, a gauge and a pump
• LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 10,150 psi hydraulic cylinder.
• Quickly and easily mount on a wide range of applications
• Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Enerpac cylinders and pumps can be operated to 10,150 psi, but should not be operated past 5,000 psi when using the Cross Bearing Puller Set tools.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: LGH310, SGM0704, BHP112, BHP181, BHP180, PUD1300B, G2535L, HC7206C

EP LGHMS314EB

14 Ton, 3 Jaw, Hydraulic Lock-Grip Master Puller Set with Electric Pump, 115V
Applications: Pull

• Type: Puller
• Max PSI: 10150

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGHMS
• SubTypes: Lock-Grip Master Puller Sets

• Capacity Imperial Tons: 14
• Capacity KN: 125

• All LGHMS-Series Master Puller Sets include an LGH-Series Puller, a Cross Puller, a Bearing Separator, a Bearing Cup Puller, a detachable Hollow Cylinder, a hose, a gauge and a pump
• LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 10,150 psi hydraulic cylinder.
• Quickly and easily mount on a wide range of applications
• Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Enerpac cylinders and pumps can be operated to 10,150 psi, but should not be operated past 5,000 psi when using the Cross Bearing Puller Set tools.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: LGH314, RWH121, FZ1065, LGH14K6, BHP172, BHP282, BHP190, PUD1300B, G2535L, HC7206C

EP LGHMS324H

24 Ton, 3 Jaw, Hydraulic Lock-Grip Master Puller Set with Hand Pump
Applications: Pull

• Type: Puller
• Max PSI: 10150

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGHMS
• SubTypes: Lock-Grip Master Puller Sets

• Capacity Imperial Tons: 24
• Capacity KN: 215

• All LGHMS-Series Master Puller Sets include an LGH-Series Puller, a Cross Puller, a Bearing Separator, a Bearing Cup Puller, a detachable Hollow Cylinder, a hose, a gauge and a pump
• LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 10,150 psi hydraulic cylinder.
• Quickly and easily mount on a wide range of applications
• Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Enerpac cylinders and pumps can be operated to 10,150 psi, but should not be operated past 5,000 psi when using the Cross Bearing Puller Set tools.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: LGH324, RCH202, HP2015, LGH24K6, BHP272, BHP292, BHP280, P392, GA45GC, HC7206C

EP LGM203

3 Ton, 2 Jaw, Mechanical Lock-Grip Puller
Applications: Pull

• Type: Puller

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGM
• SubTypes: Lock-Grip Puller Mechanical

• Capacity Imperial Tons: 3
• Capacity KN: 26,7

• LGM-Series Pullers are an ideal solution for pulling small to medium-size wheels, sprockets, bearings and other similar shaft mounted parts. The puller's selfcentering closing system allows all jaws to move simultaneously, making it easy for a single operator to mount the puller and to perform the application. Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Quickly and easily mount on a wide range of applications
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGM-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0404

EP LGM207

7 Ton, 2 Jaw, Mechanical Lock-Grip Puller
Applications: Pull

• Type: Puller

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGM
• SubTypes: Lock-Grip Puller Mechanical

• Capacity Imperial Tons: 7
• Capacity KN: 62,3

• LGM-Series Pullers are an ideal solution for pulling small to medium-size wheels, sprockets, bearings and other similar shaft mounted parts. The puller's selfcentering closing system allows all jaws to move simultaneously, making it easy for a single operator to mount the puller and to perform the application. Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Quickly and easily mount on a wide range of applications
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGM-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0704

EP LGM204

4 Ton, 2 Jaw, Mechanical Lock-Grip Puller
Applications: Pull

• Type: Puller

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGM
• SubTypes: Lock-Grip Puller Mechanical

• Capacity Imperial Tons: 4
• Capacity KN: 35,6

• LGM-Series Pullers are an ideal solution for pulling small to medium-size wheels, sprockets, bearings and other similar shaft mounted parts. The puller's selfcentering closing system allows all jaws to move simultaneously, making it easy for a single operator to mount the puller and to perform the application. Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Quickly and easily mount on a wide range of applications
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGM-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0404

EP LGM305

5 Ton, 3 Jaw, Mechanical Lock-Grip Puller
Applications: Pull

• Type: Puller

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGM
• SubTypes: Lock-Grip Puller Mechanical

• Capacity Imperial Tons: 5
• Capacity KN: 44,5

• LGM-Series Pullers are an ideal solution for pulling small to medium-size wheels, sprockets, bearings and other similar shaft mounted parts. The puller's selfcentering closing system allows all jaws to move simultaneously, making it easy for a single operator to mount the puller and to perform the application. Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Quickly and easily mount on a wide range of applications
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGM-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0404

EP LGM308

8 Ton, 3 Jaw, Mechanical Lock-Grip Puller
Applications: Pull

• Type: Puller

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGM
• SubTypes: Lock-Grip Puller Mechanical

• Capacity Imperial Tons: 8
• Capacity KN: 71,2

• LGM-Series Pullers are an ideal solution for pulling small to medium-size wheels, sprockets, bearings and other similar shaft mounted parts. The puller's selfcentering closing system allows all jaws to move simultaneously, making it easy for a single operator to mount the puller and to perform the application. Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Quickly and easily mount on a wide range of applications
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGM-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0704

EP LGM306

6 Ton, 3 Jaw, Mechanical Lock-Grip Puller
Applications: Pull

• Type: Puller

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGM
• SubTypes: Lock-Grip Puller Mechanical

• Capacity Imperial Tons: 6
• Capacity KN: 48,9

• LGM-Series Pullers are an ideal solution for pulling small to medium-size wheels, sprockets, bearings and other similar shaft mounted parts. The puller's selfcentering closing system allows all jaws to move simultaneously, making it easy for a single operator to mount the puller and to perform the application. Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Quickly and easily mount on a wide range of applications
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGM-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0404

EP LH50

Direct Mounted Load Cell, 10,000 lbs Capacity

• Type: Tension Meter and Load Cell

• Product Group: Presses
• Product Line: Industrial Tools
• Series: LH
• SubTypes: Direct Mounted Load Cell

• Accuracy, plus/minus2% of full scale
• Zinc and bronze plated to resist rust and corrosion
• Dual-range readout in kilograms and pounds
• Cushioned metal case provides safe storage and transport
• Maximum indicating pointer reading for pre-selected forces or to maintain maximum force readings
• TM and LH models are 100% tested to verify accuracy within a plus/minus2% range. If your application requires a calibrated tool, it must be submitted for certification testing. Certification is NOT available from Enerpac.