DYNABRADE INC. S12699

DY 11592

DY 11605

1/8in (3 mm) Thickness, Used on Dynabelter, Dynangle, Dynafile III

DY 13061

DY 13071

DY 13108

DY 13258

DY 13440

DY 13442

DY 15025

DY 15029

DY 15108

DY 15305

DY 15307

DY 15308

DY 15309

DY 15355

DY 15363

DY 40014

DY 50786

DY 50855

Medium Density, 3,200 RPM Max.

DY 50902

DY 50939

DY 51655

DY 51656

DY 51657

DY 51658

DY 51659

DY 51660

DY 51661

DY 51942

DY 51956

DY 51990

DY 52098

DY 52099

DY 52700

.7 hp, 18,000 RPM, Front Exhaust, 3/8in -24 Spindle Thread

Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.

.7 hp, 18,000 RPM, 3/8in -24 Spindle

• HP: 0.7
• Max. RPM: 15000.0
• Motor RPM: 15000

DY 53030

DY 53052

DY 53090

.7 hp, 950 RPM, Pistol Grip, Geared, Rear Exhaust, Keyed Jacobs Chuck

Includes 1/2in drill chuck and key.

High-torque air motor. slow-speed startup trigger.

• HP: 0.7
• Max. RPM: 950.0
• Motor RPM: 950

DY 53152

DY 53174

DY 53157

DY 53195

DY 53552

DY 53581

DY 53669

DY 53679

DY 53880

DY 53980

DY 54017

Foam, Medium Density, 1/4in -20 Female Thread

DY 54514

DY 55393

DY 55401

DY 56847

DY 57855

3/8in (10 mm) Thickness Urethane, Medium Density, For PSA Discs

DY 57867

DY 57872

DY 59293

DY 59332

DY 59333

DY 59340

DY 59342

DY 61506

DY 62449

DY 63210

460 V, 3 Phase, 60 Hz

Eliminate airborne dust and contaminants while sanding. Working Area of 36in (91 cm) W x 72in (183 cm) L.

Ideal for use with vacuum-ready or non-vacuum tools. Dual filtration - accepts 1-micron pleated paper filters: 20in (508 mm) W x 25in (635 mm) L. Includes three filters.

• HP: 1.0

DY 64251

DY 64651

DY 64684

DY 64685

DY 64700

115 V, 1 Phase, 60 Hz

Eliminate airborne dust and contaminants while sanding. Working Area of 36in (91 cm) W x 72in (183 cm) L.

Ideal for use with vacuum-ready or non-vacuum tools. Dual filtration accepts 1-micron pleated paper filters: 20in (508 mm) W x 25in (635 mm) L. Includes three filters.

• HP: 1.0

DY 78025

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78026

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78030

2-dimensional open structure non woven surface conditioning material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78034

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78157

Unit = 1 sheet (25/sheet)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

For spot repair on primed and painted surfaces to remove dust nibs and small paint runs

DY 78167

25 Count Bag

Creates thinner scratch than aluminum oxide due to its sharper grain. Silicon carbide will cut faster but does not last as long as aluminum oxide.

Prepare primed and painted surfaces for finishing.

DY 78168

25 Count Bag

Creates thinner scratch than aluminum oxide due to its sharper grain. Silicon carbide will cut faster but does not last as long as aluminum oxide.

Prepare primed and painted surfaces for finishing.

DY 78377

Thick, strong synthetic fibers and coarse abrasive with a smear-resistant adhesive for quick and easy cleaning and conditioning.

Clean welds, removal of paint/coatings, scale and oxidation.

DY 78381

The best choice for rough cleaning and stripping of coatings, oxidation, weld slag and rust without damanging the underlying surface

The abrasive is dispersed and coated thoughout the entire disc providing a constant and consistent cut rate

DY 78415

2-dimensional open structure non woven surface conditioning material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 79050

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79051

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79053

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79058

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79061

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79062

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79063

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79123

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

DY 79143

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

DY 79147

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

DY 79201

(5) 79031, (5) 79032 Z/A Belts and (1) 78020 NWN Belt

Dynabrade's Abrasive Belt Assortment Pak includes: 5-60 Grit DynaCut Zirconia Alumina Coated Belts, 5-80 Grit DynaCut Zirconia Alumina Coated Belts and 1-Medium Surface Conditioning (Non-Woven Nylon) Belt.

DynaCut Zirconia Alumina Coated Abrasive Belts are ideal for metalworking, finishing on stainless steel, nickel alloy, forged steel and aluminum.

DY 79230

Unit = 1 Roll (100/Roll)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79240

Unit = 1 Roll (100/Roll)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79948

Unit = 1 box (100/box)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79949

Unit = 1 box (100/box)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79962

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79964

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79965

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79970

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79971

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 79973

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible