DYNABRADE INC. S12699

DY 56591

DY 56641

DY 56846

DY 57057

DY 57058

DY 57456

3/8in (10 mm) Thickness Urethane, Medium Density, For Reattachable Discs

The premium self skinning urethane foam provide optimum support and flexibility for the widest range of sanding applications with coarse to ultra fine grit abrasives.

3/8in (10 mm) thick, medium density pads. Pads mount with four screws.

DY 57825

DY 57999

DY 58365

DY 58368

DY 59052

DY 59057

DY 59083

DY 59084

DY 59380

DY 61401

20 Gallon (78 L), 20 A, 120V/60 Hz, M-Class, Stainless Steel-Conductive, Dry Only, N. America

Designed for general source capture and dry cleanup. 7.8' (238 cm) water static lift. 125 CFM (3,3521 L/Min) vacuum flow. Allows operation of two tools simultaneously. Vacuum starts automatically with startup of tool. Bypass Motor System uses environmental air to cool the motor and extend vacuum life. Heavy-duty stainless steel recovery tank, with 20 gallon (78 liter) capacity for clean filter assurance. This size allows filter to remain at substantial distance from collected debris, reducing clogging and extending motor life.

Includes a HEPA H13 Filter with 99.95 % efficiency on 0.3 micron. Automatic cleaning of filter. By connecting vacuum unit to external air supply, a blast of air is released to filter every 40 seconds of operation, to cyclically clean filter. Handy electric outlet on motor head allows for additional versatility in workplace. Convenient orange warning light indicates that filter needs replacement. Red warning light indicates protection device has been activated to prevent heat overload to motor. Connects to optional 61483 Cart. This unit requires a NEMA 5-20 Plug/Outlet. (See picture)

DY 69364

DY 78100

A good high performance mineral that is sharp, hard and tough.

Works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

DY 59020S

DY 01011

DY 01007

DY 01015

DY 01036

DY 01111

DY 01464

DY 01185

DY 01468

DY 01469

DY 01606

DY 01480

DY 01897

DY 01950

DY 02039

DY 02057

DY 02624

DY 02107

DY 02649

DY 02696

DY 07102

DY 07136

DY 09623

DY 09651

DY 10210

Vacuum Kit w/X51V's and Standard Cart, M-Class, 120v/60Hz, 15 Amp, 20 gal., Conductive

DY 10214

61421 Vacuum Kit and Standard Cart, M-Class, 120v/60Hz, 15 Amp, 20 gal., Conductive

DY 10835

DY 13410

.7 hp, 7 Degree Offset, 3,400 RPM, Rear Exhaust, 3/4in (19 mm) Diameter Arbor

Dynisher Versatility Kit achieves superior in-line finishes on metal.

Includes 13400 Dynisher tool with 92938 Dynacushion pneumatic wheel (5in Diameter x 3-1/2in wide).

• HP: 0.7
• Max. RPM: 3400.0
• Motor RPM: 3400

DY 13411

.7 hp, 7 Degree Offset, 3,400 RPM, Rear Exhaust, 3/4in (19 mm) Diameter Arbor, Metric

Dynisher Versatility Kit achieves superior in-line finishes on metal.

Includes 13401 Dynisher tool with 94495 Dynacushion pneumatic wheel (90 mm x 100 mm wide).

• HP: 0.7
• Max. RPM: 3400.0
• Motor RPM: 3400

DY 13300

.4 hp, 7 Degree Offset, 3,200 RPM, Rear Exhaust, 5/8in (16 mm) Diameter Arbor

Mini-Dynisher Air-Powered Abrasive Finishing Tool achieves superior in-line finishes on metal.

Tool powers optional Dynacushion pneumatic wheel. Finish virtually any shape, contour or material, including stainless steel, aluminum, carbon steel, copper, brass, plastic, fiberglass, composites, wood, etc.

• HP: 0.4
• Max. RPM: 3200.0
• Motor RPM: 3200

DY 13310

.4 hp, 7 Degree Offset, 3,200 RPM, Rear Exhaust, 5/8in (16 mm) Diameter Arbor

Mini-Dynisher Air-Powered Abrasive Finishing Tool Versatility Kit achieves superior in-line finishes on metal.

Includes 13300 Mini-Dynisher tool and 94507 Dynacushion Pneumatic Wheel (3-1/4in Diameter X 3in wide).

• HP: 0.4
• Max. RPM: 3200.0
• Motor RPM: 3200

DY 13444

DY 13201

.7 hp, Straight-Line, 3,400 RPM, Rear Exhaust, 1/2in (13 mm) Diameter Arbor

Dynastraight Air-Powered Abrasive Finishing Tool for graining, cleaning and polishing on stainless steel, aluminum, carbon steel and composites.

3,400 RPM, .7 hp. Model includes 13016 Arbor for up to 2in wide x 1/2in I.D. wheels.

• HP: 0.7
• Max. RPM: 3400.0
• Motor RPM: 3400

DY 13101

.4 hp, Straight-Line, 3,200 RPM, Rear Exhaust, 5/8in (16 mm) or 1in (25 mm) Diameter Arbor

Lightweight Dynastraight includes 13061 Multi-Purpose Arbor for mounting optional abrasive wheels 1/2in to 3in wide (1/2in increments) with 5/8in or 1in center hole.

3,200 RPM, .4 hp. Ideal for 1/2in to 3in wide abrasive impregnated non-woven nylon wheels.

• HP: 0.4
• Max. RPM: 3200.0
• Motor RPM: 3200

DY 13503

1 hp, Straight-Line, 3,400 RPM, Rear Exhaust, 5/8in (16 mm) Diameter Arbor

Dynastraight Air-Powered Abrasive Finishing Tool for graining, cleaning and polishing on stainless steel, aluminum, carbon steel and composites.

3,400 RPM, 1 hp. Model includes 13017 Arbor for up to 2in wide x 5/8in I.D. wheels.

• HP: 1.0
• Max. RPM: 3400.0
• Motor RPM: 3400

DY 13505

1 hp, Straight-Line, 3,400 RPM, Rear Exhaust, 5/8in -11 Arbor

Dynastraight Air-Powered Abrasive Finishing Tool for graining, cleaning and polishing on stainless steel, aluminum, carbon steel and composites.

3,400 RPM, 1 hp. Model includes 13015 Threaded Arbor (5/8in -11) ideal for use with optional 94472 Dynacushion pneumatic wheel.

• HP: 1.0
• Max. RPM: 3400.0
• Motor RPM: 3400

DY 13204

.7 hp, Straight-Line, 3,400 RPM, Rear Exhaust, 5/8in -11 Arbor

Dynastraight Air-Powered Abrasive Finishing Tool for graining, cleaning and polishing on stainless steel, aluminum, carbon steel and composites.

3,400 RPM, .7 hp. Model includes 13015 Threaded Arbor (5/8in -11), ideal for use with optional 94472 Dynacushion Pneumatic Wheel.

• HP: 0.7
• Max. RPM: 3400.0
• Motor RPM: 3400

DY 12200

.4 hp, Straight-Line, 13/32in (10 mm), 2,400 SPM

Each model has 1/4in round file holder opening for accepting optional files with 1/4in diameter shank.

Tool includes safety-lock lever.

• HP: 0.4

DY 11475

.7 hp, 7 Degree Offset, 18,000 RPM, Front Exhaust, for 1/4in -1in W x 30in L (6-25 mm x 762 mm) Belts

For weld grinding, blending and finishing, on metal and other surfaces. Dynabelter is ideal for work on ferrous and non-ferrous metals, wood, plastic, stone and composites.

Uses include grinding cylinders, deburring castings, cleaning welds and fabricating metals. Also excellent for polishing tubing, deburring structural steel, finish-dimensioning on lathe work and blending inside corners. Safety-lock lever throttle included.

• HP: 0.7
• Max. RPM: 18000.0
• Motor RPM: 18000

DY 11011

Idler Wheel Assembly replacement for Dynafile Machine.

DY 12205

.4 hp, Straight-Line, 13/32in (10 mm), 2,400 SPM

Tool includes 12212 Saw Holder Adapter, 12183 Saw Guide, 90935 General Purpose Saw Blade.

Built-in air flow regulator.

• HP: 0.4
• Max. RPM: 2400.0

DY 11218

For 1/2in (13 mm) W x 24in (610 mm) L Belts

Standard on model 14000. accepts 1/2in x 24in belts.

DY 13102

DY 13502

1 hp, Straight-Line, 3,400 RPM, Rear Exhaust, 1/2in (13 mm) Diameter Arbor

Dynastraight Air-Powered Abrasive Finishing Tool for graining, cleaning and polishing on stainless steel, aluminum, carbon steel and composites.

3,400 RPM, 1 hp. Model includes 13016 Arbor for up to 2in wide x 1/2in I.D. wheels.

• HP: 1.0
• Max. RPM: 3400.0
• Motor RPM: 3400

DY 11476

1.2 hp, Right Angle, 13,000 RPM, Front Exhaust, for 1/4in -1in W x 30in L (6-25 mm x 762 mm) Belts

For weld grinding, blending and finishing, on metal and other surfaces. Dynabelter is ideal for work on ferrous and non-ferrous metals, wood, plastic, stone and composites.

Uses include grinding cylinders, deburring castings, cleaning welds and fabricating metals. Also excellent for polishing tubing, deburring structural steel, finish-dimensioning on lathe work and blending inside corners. Safety-lock lever throttle included.

• HP: 1.2
• Max. RPM: 13000.0
• Motor RPM: 13000

DY 13220

.7 hp, Straight-Line, 3,400 RPM, Rear Exhaust, 5/8in -11 Arbor

Dynastraight Versatility Kit, including Finishing Tool, Pneumatic Wheel and accessories.

For Graining, Cleaning and Polishing on Stainless Steel, Aluminum, Carbon Steel, Composites

• HP: 0.7
• Max. RPM: 3400.0
• Motor RPM: 3400

DY 13450

1 hp, Right Angle, 2,800 RPM, Rear Exhaust, 3/4in (19 mm) Diameter Arbor

Dynisher Air-Powered Abrasive Finishing Tool achieves superior in-line finishes on metal.

2,800 RPM, 1 hp. Ideal set-up for optional 92938 Dynacushion pneumatic wheel.

• HP: 1.0
• Max. RPM: 2800.0
• Motor RPM: 2,800

DY 10843

14,000 SPM, .007in (.018 mm) SL, In-Line 360 Degree Swivel

14,000 strokes per minute. .007in stroke length (.018 mm). precision removal resulting in less risk of gouging delicate parts. less aggressive than a Die Grinder. Lightweight and Faster than hand-filing.

Only one wrench required. easier to change files. Easy grip rubber sleeve. Includes 1/8in collet insert. Accepts 1/16in , 3/32in , 3 mm collet inserts (sold separately).

DY 13460

1 hp, Right Angle, 2,800 RPM, Rear Exhaust, 3/4in (19 mm) Diameter Arbor

Dynisher Versatility Kit achieves superior in-line finishes on metal.

Includes Model 13450 Dynisher and 92938 Dynacushion pneumatic wheel.

• HP: 1.0
• Max. RPM: 2800.0
• Motor RPM: 2,800

DY 13214

.7 hp, Straight-Line, 4,500 RPM, Rear Exhaust, 5/8in -11 Arbor

Dynastraight Air-Powered Abrasive Finishing Tool for graining, cleaning and polishing on stainless steel, aluminum, carbon steel and composites.

4,500 RPM, .7 hp. Model includes 13072 Threaded Arbor (5/8in -11), ideal for use with optional 92921 DynaWheel (5in Diameter x 1in wide).

• HP: 0.7
• Max. RPM: 4500.0
• Motor RPM: 4500

DY 11320

DY 13512

1 hp, Straight-Line, 3,400 RPM, Rear Exhaust, 1/2in (13 mm) Diameter Arbor

Dynastraight Air-Powered Abrasive Finishing Tool for graining, cleaning and polishing on stainless steel, aluminum, carbon steel and composites.

3,400 RPM, 6in Extension, 1 hp. 1/2in diameter arbor for up to 2in wide x 1/2in I.D. wheels. Any accessory with 1/2in diameter bore may be mounted.

• HP: 1.0
• Max. RPM: 3400.0
• Motor RPM: 3,400

DY 13509

1 hp, Straight-Line, 6,000 RPM, Rear Exhaust, 5/8in (16 mm) or 1in (25 mm) Diameter Arbor

Dynastraight Air-Powered Abrasive Finishing Tool for graining, cleaning and polishing on stainless steel, aluminum, carbon steel and composites.

6,000 RPM, 1 hp. Tool includes 13071 Combo Arbor, for up to 3in wide wheels with 5/8in or 1in diameter center hole.

• HP: 1.0
• Max. RPM: 6000.0
• Motor RPM: 6000

DY 13400

.7 hp, 7 Degree Offset, 3,400 RPM, Rear Exhaust, 3/4in (19 mm) Diameter Arbor

Dynisher Air-Powered Abrasive Finishing Tool achieves superior in-line finishes on metal.

3,400 RPM, .7 hp. Excellent for blending and finishing stainless steel and other metals, leaving an in-line scratch pattern.

• HP: 0.7
• Max. RPM: 3400.0
• Motor RPM: 3400

DY 13515

1 hp, Straight-Line, 3,400 RPM, Rear Exhaust, 5/8in -11 Arbor

Dynastraight Air-Powered Abrasive Finishing Tool for graining, cleaning and polishing on stainless steel, aluminum, carbon steel and composites.

3,400 RPM, 6in Extension, 1 hp. Ideal set-up for optional Dynacushion wheel.

• HP: 1.0
• Max. RPM: 3400.0
• Motor RPM: 3,400

DY 13518

1 hp, Straight-Line, 4,500 RPM, Rear Exhaust, 5/8in (16 mm) or 1in (25 mm) Diameter Arbor

Dynastraight Air-Powered Abrasive Finishing Tool for graining, cleaning and polishing on stainless steel, aluminum, carbon steel and composites.

4,500 RPM, 6in Extension, 1 hp. Includes 13071 Combo Arbor, for up to 3in wide wheels with 5/8in or 1in Diameter center hole.

• HP: 1.0
• Max. RPM: 4500.0
• Motor RPM: 4,500

DY 11109

1/8in (3 mm) Thickness, Used On Dynafile II

DY 13519

1 hp, Straight-Line, 6,000 RPM, Rear Exhaust, 5/8in -11 Arbor

Dynastraight Air-Powered Abrasive Finishing Tool for graining, cleaning and polishing on stainless steel, aluminum, carbon steel and composites.

6,000 RPM, 6in Extension, 1 hp. Tool includes threaded arbor for use with up to 3-1/4in diameter pneumatic wheels with threaded 5/8in -11 center hole (such as 94508 Dynacushion).

• HP: 0.7
• Max. RPM: 6000.0
• Motor RPM: 6,000

DY 13517

1 hp, Straight-Line, 4,500 RPM, Rear Exhaust, 1/2in (13 mm) Diameter Arbor

Dynastraight Air-Powered Abrasive Finishing Tool for graining, cleaning and polishing on stainless steel, aluminum, carbon steel and composites.

4,500 RPM, 6in Extension, 1 hp. Includes 1/2in diameter arbor for up to 2in wide x 1/2in I.D. wheels.

• HP: 0.7
• Max. RPM: 4500.0
• Motor RPM: 4,500

DY 13523

1 hp, Straight-Line, 4,500 RPM, Rear Exhaust, 5/8in -11 Arbor

Dynastraight Air-Powered Abrasive Finishing Tool for graining, cleaning and polishing on stainless steel, aluminum, carbon steel and composites.

4,500 RPM, 1 hp. Includes 13070 Threaded Arbor (5/8in -11 male) for exclusive use with optional 92867 or 92868 DynaWheel (5in Diameter x 1-1/2in wide).

• HP: 1.0
• Max. RPM: 4500.0
• Motor RPM: 4500

DY 13520

1 hp, Straight-Line, 4,500 RPM, Rear Exhaust, 5/8in -11 Arbor

Dynastraight Air-Powered Abrasive Finishing Tool for graining, cleaning and polishing on stainless steel, aluminum, carbon steel and composites.

4,500 RPM, 6in Extension, 1 hp. Includes threaded arbor for use with up to 3-1/4in Diameter Pneumatic wheels with threaded 5/8in -11 center hole.

• HP: 1.0
• Max. RPM: 4500.0
• Motor RPM: 4,500

DY 13525

1 hp, Straight-Line, 3,400 RPM, Rear Exhaust, 5/8in -11 Arbor

Dynastraight Versatility Kit, including Finishing Tool and DynaWheel.

For Material Removal on Stainless Steel, Aluminum, Carbon Steel, Composites

• HP: 1.0
• Max. RPM: 3400.0

DY 14000

.5 hp, Straight-Line, 20,000 RPM, Front Exhaust, for 1/8in -1/2in W x 24in L (3-13 mm x 610 mm) Belts

World-famous Dynafile replaces tedious hand filing and sanding. Grind, deburr, blend, polish, finish and more!

Grind from contact wheel or platen pad. Finish and polish using slack of belt. For use on metal, plastic, fiberglass, composites, rubber, glass and stone.

• HP: 0.5
• Max. RPM: 20000.0
• Motor RPM: 20000

DY 14300

1.2 hp, Straight-Line, 13,000 RPM, Front Exhaust, for 2in W x 34in L (51 mm x 864 mm) Belts

Polish, grind contours and flats. Surface conditions stainless steel and most other metals. Also used on wood, plastic, fiberglass and composites. Blends and finishes solder seams. Built-in abrasive belt guard. fast belt change.

Single Motor model uses 2in x 34in belts. belts spans 11-1/2in for strap polishing up to 36in diameter pipe.

• HP: 1.2
• Max. RPM: 13000.0
• Motor RPM: 13000

DY 14010

.5 hp, Straight-Line, 20,000 RPM, Front Exhaust, for 1/8in -1/2in W x 24in L (3-13 mm x 610 mm) Belts

World-famous Dynafile replaces tedious hand filing and sanding. Grind, deburr, blend, polish, finish and more! Grind from contact wheel or platen pad. Finish and polish using slack of belt. For use on metal, plastic, fiberglass, composites, rubber, glass and stone.

Tool includes 11218 Contact Arm for standard use. Also accepts a variety of additional Contact Arms. Work in areas as small as 3/8in diameter. Superior belt tracking permits use of abrasive belts 1/8in , 1/4in or 1/2in wide x 24in long.

• HP: 0.5
• Max. RPM: 20000.0
• Motor RPM: 20000

DY 14317

DY 14303

2.4 hp, Straight-Line, 13,000 RPM, Front Exhaust, for 2in W x 34in L (51 mm x 864 mm) Belts

Polish, grind contours and flats. Surface conditions stainless steel and most other metals. Also used on wood, plastic, fiberglass and composites. Blends and finishes solder seams. Built-in abrasive belt guard. fast belt change.

Heavy-Duty 'Dual Motor' with Platen offers extra power. Uses 2in x 34in belts. belts spans 11-1/2in for 'strap polishing' up to 36in diameter pipe.

• HP: 2.0
• Max. RPM: 13000.0
• Motor RPM: 13000

DY 14319

DY 14346

DY 14347

DY 15006

.4 hp, 7 Degree Offset, 25,000 RPM, Rear Exhaust, for 1/8in -1/2in W x 12in L (3-13 mm x 305 mm) Belts

Ideal for strap polishing and working in narrow openings. Kit includes 15003 Tool (15118 Drive Wheel) with 15026 Contact Arm for 1/2in wide x 12in long abrasive belts. Also includes 15028 and 15030 Arms.

Lightweight ergonomic design handle features 7 degree offset. Multi-position grinding head pivots 360 Degree.

• HP: 0.4
• Max. RPM: 25000.0
• Motor RPM: 25000

DY 15013

.4 hp, 7 Degree Offset, 25,000 RPM, Rear Exhaust, for 1/8in -1/2in W x 13in L (3-13 mm x 330 mm) Belts

Ideal for strap polishing and working in narrow openings. Tool includes 15035 Contact Arm for 1/2in (13 mm) wide x 13in (330) long abrasive belts and 11078 Drive Wheel.

Lightweight ergonomic design handle features 7 degree offset. Multi-position grinding head pivots 360 Degree.

• HP: 0.4
• Max. RPM: 25000.0

DY 15300

.7 hp, 7 Degree Offset, 20,000 RPM, Front Exhaust, for 1/4in -1in W x 18in L (6-25 mm x 457 mm) Belts

Excellent for grinding welds, blending and deburring. Dynafile III Abrasive Belt Tool offers all the versatility of our world-famous Dynafile II, while serving up more power (.7 hp / 522 W) for faster material removal.

Tool includes high-efficiency Rubber Drive Wheel, ideal for use with all abrasive belts.

• HP: 0.7
• Max. RPM: 20000.0
• Motor RPM: 20000

DY 15401

.7 hp, 7 Degree Offset, 20,000 RPM, Front Exhaust, 5/8in , 3/4in x20-1/2in L (13 mm,19 mm x 521 mm) Belts

Dynafile III Abrasive Belt Tool offers all the versatility of our world-famous Dynafile II, while serving up more power (.7 hp / 522 W) for faster material removal.

Includes 11287 Contact Arm for belts 5/8in or 3/4in wide x 20-1/2in long. Ideal for a variety of applications. Tool does not include side handle, reducing tool weight and allowing greater maneuverability. (53163 side handle is still available as an option.)

• HP: 0.7
• Max. RPM: 20000.0

DY 15302

.7 hp, 7 Degree Offset, 20,000 RPM, Front Exhaust, for 1/4in -1in W x 18in L (6-25 mm x 457 mm) Belts

Excellent for grinding welds, blending and deburring. Dynafile III Abrasive Belt Tool offers all the versatility of our world-famous Dynafile II, while serving up more power (.7 hp / 522 W) for faster material removal.

Includes 15300 Dynafile III with 15321, 15350 and 15357 Contact Arms, plus assortment of abrasive belts, spare 15336 Drive Wheel, wrenches and hex keys, all in durable carrying case.

• HP: 0.7
• Max. RPM: 20000.0
• Motor RPM: 20000

DY 14318

DY 18571

DY 15420

.7 hp, 7 Degree Offset, 20,000 RPM, Front Exhaust, 1/4in , 1/2in W x 24in L (6 mm, 13 mm x 610 mm) Belts

Dynafile III Abrasive Belt Tool offers all the versatility of our world-famous Dynafile II, while serving up more power (.7 hp / 522 W) for faster material removal.

Includes 11702 Contact Arm with unique 4in diameter wheel, for grinding or blending right angle welds and fillit welds. Contact Arm includes hand guide for additional control. Saves time and reduces costs!

• HP: 0.7
• Max. RPM: 20000.0
• Motor RPM: 20,000

DY 22090

DY 15003

.4 hp, 7 Degree Offset, 25,000 RPM, Rear Exhaust, for 1/8in -1/2in W x 12in L (3-13 mm x 305 mm) Belts

Ideal for strap polishing and working in narrow openings. Tool includes 15026 Contact Arm for 1/2in wide x 12in long abrasive belts and 15118 Drive Wheel.

Lightweight ergonomic design handle features 7 degree offset. Multi-position grinding head pivots 360 Degree.

• HP: 0.40
• Max. RPM: 25000.0
• Motor RPM: 25000

DY 23090

DY 22093