Airpower | DYNABRADE INC. S12699 branded products

DY 79364

5in (127 mm) Diameter x 180 Grit A/O Hook Multi-Hole Vacuum Film-Backed DynaCut Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The premium film backing resists edge tearing and promotes better grain adhesion for longer useful life

$1.21

DynaRed Polishing Compound, 1 Liter, First cut, or 1500 grit scratches or finer.

DY 79712

DynaRed Polishing Compound, 1 Liter

First cut, or 1500 grit scratches or finer.

Removes grit P1500 sanding marks in seconds, leaving a brilliant finish

Unmatched cutting and gloss features

$0.00

3in (76 mm) W x 10-11/16in (272 mm) L Medium NWN

DY 89212

3in (76 mm) W x 10-11/16in (272 mm) L Medium NWN DynaBrite Premium Belt

high perfomance aluminum oxide produces an aggressive cutting action

smear resistant resin reduces rework and cycle times

$29.72

3in (76 mm) W x 10-11/16in (272 mm) L Very Fine NWN

DY 89211

3in (76 mm) W x 10-11/16in (272 mm) L Very Fine NWN DynaBrite Premium Belt

high perfomance aluminum oxide produces an aggressive cutting action

smear resistant resin reduces rework and cycle times

$29.72

5-1/2in Dynacut Top Wool Polishing Pad, Hook and Loop

DY 79701

5-1/2in Dynacut Top Wool Polishing Pad, Hook and Loop

Premium 100% wool polishing pad with an integrated orange foam interface layer

Provides maximum cutting performance on fresh, cured and worn paint surfaces

$20.43

DY 90027

3in (76 mm) Diameter Polishing Pad, Terry Cloth

Reattachable Hook-Face Backing

Good choice for the application and removal of waxes and polishes.

Unlike Wool [pads, the long fibers of 100% cotton terry cloth pads are less likely to become caked with wax and polish.

$13.34

3in Dia. Polishing Pad, Synthetic Wool Reattachable Hook-Face

DY 90028

3in (76 mm) Diameter Polishing Pad, Synthetic Wool

Reattachable Hook-Face Backing, Polishing/White

Synthetic Wool: Final finishing and polishing.

Hook and loop backing makes pads changes quick and easy

$14.89

1in (25 mm) W x 18in (457 mm) L 320 Grit A/O DynaCut

DY 90290

1in (25 mm) W x 18in (457 mm) L 320 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$1.90

1in (25 mm) W x 18in (457 mm) L 220 Grit A/O DynaCut

DY 90289

1in (25 mm) W x 18in (457 mm) L 220 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$1.90

3-1/2in W x 15-1/2in L 180 Grit A/O DynaCut Belt, MOQ/10

DY 90277

3-1/2in (89 mm) W x 15-1/2in (394 mm) L 180 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$4.66

5-1/2in Dynacut Orange Foam Flat Face Polishing Pad, Hook and Loop

DY 79703

5-1/2in Dynacut Orange Foam Flat Face Polishing Pad, Hook and Loop

This all-purpose, semi-firm pad with a fine, closed-cell foam structure is ideal for final finish and sealing applications

Use with Dynabrade DynaOrange Polishing compound to generate swirl free and hologram free finishes on all clear coats and any color

$13.74

3-1/2in W x 15-1/2in L 120 Grit A/O DynaCut Belt, MOQ/10

DY 90355

3-1/2in (89 mm) W x 15-1/2in (394 mm) L 120 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$4.66

4 1/2 (108 MM) DIA. X 4 (102 MM) X 5/8 - 11 S Ultra Fine Dynabrite Surface Conditioning Flap Wheel

DY 79487

4-1/4in (108 mm) Diameter x 4in (102 mm) x 5/8in -11 S Ultra Fine DynaBrite Surface Conditioning Flap Wheel

Dynabrite finishing flap rolls and wheels are an ideal choice for a broad range blending and finishing aplications in metal fabrication

Conformable to for intricate shapes and countours

$125.92

1/4in W x 12in L Very Fine DynaBrite Plus Surface Conditioning Belt MOQ/10

DY 79502

1/4in (6 mm) W x 12in (305 mm) L Very Fine DynaBrite Plus Surface Conditioning Belt

sharp fast cutting heat trated aluminum oxide abrasive helps to maintain Ra finish specifications throughout product life, reducing scrap and rework

proprietary resin technology eliminates smearing even on high nickel alloys

$5.08

Dynabright Belt 3/4in X 18in, Medium, Minium of 10 Pcs

DY 90294

3/4in (19 mm) W x 18in (457 mm) L Medium NWN DynaBrite Premium Belt

High performance aluminum oxide produces an aggressive cutting action

smear resistant resin reduces rework and cycle times

$12.06

7in (178 mm) W x 10-11/16in (252 mm) L 80 Grit A/O

DY 90599

7in (178 mm) W x 10-11/16in (252 mm) L 80 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$7.27

7in (178 mm) W x 10-11/16in (271 mm) L 180 Grit A/O

DY 90601

7in (178 mm) W x 10-11/16in (271 mm) L 180 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$6.60

7in (178 mm) W x 10-11/16in (271 mm) L 320 Grit A/O

DY 90602

7in (178 mm) W x 10-11/16in (271 mm) L 320 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$6.60

Flap Disc 60 Grit, (10 Per Pack)

DY 90925

3in (76 mm) Diameter x 60 Grit Z/A Non-Vacuum DynaCut Locking-Type Flap Disc

DynaCut Zirconia Alumina flap discs are manufactured with a ZA grain that is sharp, hard and tough. It works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

For stock removal, deburring, blending, edge-chamfering and rust removal. Can also be used for general cleaning and finishing.

$4.61

1/4in (6mm) x 18in (457mm), 60 Grit A/O Dynacut Belt, 50/Minimum

DY 91114

1/4in (6 mm) W x 18in (457 mm) L 60 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$1.15

Insert, 1/8in Scribe, Tugsten Carbide

DY 90996

Insert, 1/8in Scribe, Tugsten Carbide

$62.46

1/4in x18in, 120 Grit A/O Dynacut Belt, 50/Min

DY 91116

1/4in (6 mm) W x 18in (457 mm) L 120 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$1.15

1/4in x18in, 80 Grit A/O Dynacut Belt, 50/Minimum

DY 91115

1/4in (6 mm) W x 18in (457 mm) L 80 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$1.15

1/2in x 18in, 80 Grit A/O Dynacut Belt, 50/Min

DY 91118

1/2in (13 mm) W x 18in (457 mm) L 80 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$1.35

Dynacut Belt 1/2in X 18in 120 Grit, 50/Min

DY 91119

1/2in (13 mm) W x 18in (457 mm) L 120 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$1.35

3/8in (10 mm) W x 13in (330 mm) L 60 Grit A/O DynaCut Belt

DY 91162

3/8in (10 mm) W x 13in (330 mm) L 60 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$1.71

1in (25 mm) W x 18in (457 mm) L 120 Grit A/O DynaCut

DY 91128

1in (25 mm) W x 18in (457 mm) L 120 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$1.90

1/2in x 24in, 120 Grit A/O Dynacut Belt, Sold in Multiples of 50

DY 91439

1/2in (13 mm) W x 24in (610 mm) L 120 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$1.44

1/2in x 24in, 80 Grit A/O Dynacut Belt, Sold in Multiples of 50

DY 91438

1/2in (13 mm) W x 24in (610 mm) L 80 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$1.44

5 Inch Vac-120 Grit, Hook And Loop, 50Pk

DY 91538

5in Vac -120 Grit H&L Dynacut

Extreme Orange Premium Film Disc 50 Pack

Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life

Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs

$38.37

5in Vac , 400 Grit H&L Dynacut Extreme Orange Premium Film Disc 50 Pack

DY 91543

5in Vac -400 Grit H&L Dynacut

Extreme Orange Premium Film Disc 50 Pack

Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life

Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs

$38.37

5in N/V -400 Grit H&L Dynacut Orange Premium Film Disc, 50 Pack

DY 91552

5in N/V -400 Grit H&L Dynacut

Extreme Orange Premium Film Disc, 50 pack

Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life

Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs

$38.37

6in 150 Grit PSA Sand Paper, 50 Pack

DY 91557

6in NV -150 Grit PSA Dynacut

Extreme Orange Premium Film Disc 50 Pack

Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life

Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs

$42.77

6in 180 Grit PSA Sand Paper, 50 Pack

DY 91558

6in NV -180 Grit PSA Dynacut

Extreme Orange Premium Film Disc 50 Pack

Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life

Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs

$42.77

6in N/V, 80 Grit, H&L Dynacut Extreme Orange Film Disc, 50 Pack

DY 91572

6in N/V -80 Grit H&L Dynacut

Extreme Orange Premium Film Disc 50 Pack

Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life

Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs

$49.50

6 Inch Non-Vacuum 180 Grit Sanding Pads

DY 91576

6in N/V -180 Grit H&L Dynacut

Extreme Orange Premium Film Disc 50 Pack

Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life

Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs

$42.77

6 Inch Non-Vacuum 220 Grit Sanding Pads

DY 91577

6in N/V -220 Grit H&L Dynacut

Extreme Orange Premium Film Disc 50 Pack

Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life

Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs

$42.77

Dynamesh 5in, 100 Grit, Hook and Loop Disc, 50 Pk

DY 91713

Dynamesh 5in 100 Grit Hook and Loop Discs

50 ct. Box

Dynamesh provides a unique in dust freein solution for any vacuum compatible random orbital sander regardless of back-up pad vacuum hole configuration

The open mesh construction reduces dust from the sanding process, reduces loading and clogging which in turn results in a cleaner environment, greater efficiency and longer life

$53.50

Dynamesh 5in, 180 Grit, Hook and Loop Disc, 50 Pk

DY 91716

Dynamesh 5in 180 Grit Hook and Loop Discs

50 ct. Box

Dynamesh provides a unique in dust freein solution for any vacuum compatible random orbital sander regardless of back-up pad vacuum hole configuration

The open mesh construction reduces dust from the sanding process, reduces loading and clogging which in turn results in a cleaner environment, greater efficiency and longer life

$53.50

Dynamesh 5in, 240 Grit, Hook and Loop Disc, 50 Pk

DY 91718

Dynamesh 5in 240 Grit Hook and Loop Discs

50 ct. Box

Dynamesh provides a unique in dust freein solution for any vacuum compatible random orbital sander regardless of back-up pad vacuum hole configuration

The open mesh construction reduces dust from the sanding process, reduces loading and clogging which in turn results in a cleaner environment, greater efficiency and longer life

$53.50

Dynamesh 5in, 400 Grit, Hook and Loop Disc, 50 Pk

DY 91721

Dynamesh 5in 400 Grit Hook and Loop Discs

50 ct. Box

Dynamesh provides a unique in dust freein solution for any vacuum compatible random orbital sander regardless of back-up pad vacuum hole configuration

The open mesh construction reduces dust from the sanding process, reduces loading and clogging which in turn results in a cleaner environment, greater efficiency and longer life

$53.50

2in(51mm) Dia. x 36 Grit Ceramic Dynacut Locking-Type Disc

DY 92025

2in (51 mm) Diameter x 36 Grit Ceramic Non-Vacuum DynaCut Locking-Type Disc

A premium ceramic high performance mineral that is sharp, hard and tough. It micro fracturing and slf sharpening characteristics make it one of the most versatile minerals that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

The best choice for high heat and high grinding pressure applications that is also effective on many materials at lower grinding pressures.

$1.77

1/2in x 12in Belt, 320 Grit A/O, Sold as Each, 50/pack Minimum

DY 92116

1/2in (13 mm) W x 12in (305 mm) L 320 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$1.29

3in (76 mm) Dia. x 60 Grit A/O Non-Vacuum Hook-Face Filmbac DynaCut Disc

DY 92074

3in (76 mm) Diameter x 60 Grit A/O Non-Vacuum Hook-Face Filmbac DynaCut Disc

The most common mineral for general purpose applications. Ideal for sanding on bare wood, metal, plastic and fiberglass. Also used to prepare primed and painted surfaces for finishing.

$0.58

1/2 (13 MM) W x 18 (457 MM) L 120 GRIT

DY 92151

1/2in W x 18in L 120 Grit Ceramic DynaCut Scalloped Edge Belt

Ceramic abrasive grain is extremely tough and its self-sharpening design lasts 50% to 200% longer than other belts.

Belts with scalloped edge design provide easier access and faster stock removal, with less undercutting

$4.66

1/2 (13 MM) W x 18 (457 MM) L 80 GRIT

DY 92150

1/2in W x 18in L 80 Grit Ceramic DynaCut Scalloped Edge Belt

Ceramic abrasive grain is extremely tough and its self-sharpening design lasts 50% to 200% longer than other belts.

Belts with scalloped edge design provide easier access and faster stock removal, with less undercutting

$4.66

1/2in (13 mm) W x 12in (305 mm) L 80 Grit, Ceramic DynaCut Scalloped Edge Belt

DY 92153

1/2in (13 mm) W x 12in (305 mm) L 80 Grit Ceramic DynaCut Scalloped Edge Belt

Ceramic abrasive grain is extremely tough and its self-sharpening design lasts 50% to 200% longer than other belts.

Belts with scalloped edge design provide easier access and faster stock removal, with less undercutting

$3.90

1/4in x 18in, 120 Grit A/O Dynacut Belt, 50/Min

DY 92229

1/8in (3 mm) W x 18in (457 mm) L 120 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$1.02

3in Dia x 80 Grit Premium CeramicNon-Vac. DynaCut Lock Disc, 25/Min

DY 93095

3in (76 mm) Diameter x 80 Grit Premium Ceramic Non-Vacuum DynaCut Locking-Type Disc

A premium ceramic high performance mineral that is sharp, hard and tough. It micro fracturing and slf sharpening characteristics make it one of the most versatile minerals that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

The best choice for high heat and high grinding pressure applications that is also effective on many materials at lower grinding pressures.

$2.24

1/4in x 18in, 180 Grit A/O Dynacut Belt, 50/Min

DY 92232

1/8in (3 mm) W x 18in (457 mm) L 180 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$1.02

1-1/2 (38 mm) Dia.120 Grit A/O Eyelet Sanding Star

DY 93542

1-1/2in (38 mm) Diameter 120 Grit A/O Eyelet Sanding Star

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

$11.70

3in Mandrel for 1in Sanding Star

DY 93534

Mandrel

$9.90

2in Dia. 120 Grit A/O Eylet Sanding Star

DY 93552

2in (51 mm) Diameter 120 Grit A/O Eyelet Sanding Star

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

$12.59

3" Mandrel for 1 1/2" Sanding Star

DY 93548

3" Mandrel for 1 1/2" Sanding Star

$9.90

3in 120 Grit A/O Sanding Star

DY 93559

3in (76 mm) Diameter 120 Grit A/O Eyelet Sanding Star

The most common mineral used in a wide range of good, general purpose abrasive products for use primarily on softer materials. It lacks the hardness of some other abrasive minerals but delivers a dependable performance where high pressure/high heat applies

Denibbing and sanding white wood raised panels.

$15.79

4in Dia. 120 Grit A/O Eyelet Sanding Star

DY 93566

4in (102 mm) Diameter 120 Grit A/O Eyelet Sanding Star

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

$28.98

1in Dia. 120Grit a/O Eylet Sanding Star

DY 93587

1in (25 mm) Diameter 120 Grit A/O Eyelet Sanding Star

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

$3.15

Coated Abrasive Sheet 180 Grit / Must order 50 Pcs

DY 93672

7/8in (22 mm) W x 4-1/2in (114 mm) L 180 Grit A/O Hook-Face DynaCut Raised Panel Strip

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The premium film backing resists edge tearing and promotes better grain adhesion for longer useful life

$0.77

Dynacut Sheet, Hook-Face, 150 Grit

DY 93934

81 mm W x 133 mm L 150 Grit A/O Vacuum Hook-Face DynaCut Sheet

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$0.96

Coated Abrasive Sheet 120 Grit

DY 93670

7/8in (22 mm) W x 4-1/2in (114 mm) L 120 Grit A/O Hook-Face DynaCut Raised Panel Strip

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The premium film backing resists edge tearing and promotes better grain adhesion for longer useful life

$0.77

Tear-Drop Abrasive Disc, 80 Grit

DY 93993

Tear Drop x 80 Grit A/O Non-Vacuum PSA DynaCut Dynafine Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.23

75mm W x 110mm L 100 Grit A/O Vac. Hook-Face DynaCut Sheet, 50/MIN

DY 93802

75 mm W x 110 mm L 100 Grit A/O Vacuum Hook-Face DynaCut Sheet

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$0.70

Tear Drop x 80 Grit A/O Non-Vacuum Hook-face Disc, MOQ/50

DY 93953

Tear Drop x 80 Grit A/O Non-Vacuum Hook-Face DynaCut Dynafine Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.32

Dynacut Sheet, Hook-Face, 220 Grit

DY 93936

81 mm W x 133 mm L 220 Grit A/O Vacuum Hook-Face DynaCut Sheet

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$0.96

100 mm W x 148 mm L 120 Grit A/O Vacuum Hook-Face 7-Delta DynaCut Sheet

DY 93878

100 mm W x 148 mm L 120 Grit A/O Vacuum Hook-Face 7-Delta DynaCut Sheet

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.04

Tear Drop x 120 Grit A/O Non-Vacuum Hook-face Disc, MOQ/50

DY 93955

Tear Drop x 150 Grit A/O Non-Vacuum Hook-Face DynaCut Dynafine Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.32

Dynacut Sheet, Hook-Face, 320 Grit

DY 93937

81 mm W x 133 mm L 320 Grit A/O Vacuum Hook-Face DynaCut Sheet

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$0.96

3in, 80 Grit Disc, 50 Per Pack

DY 93665

3in (76 mm) Diameter x 80 Grit A/O Vacuum Hook-Face DynaCut Dynafine Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$0.58

400 Grit A/O Non-Vac Hook-Face

DY 93848

81 mm W x 133 mm L 400 Grit A/O Non-Vacuum Hook-Face DynaCut Sheet

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$0.96

Coated Abrasive Sheet 150 Grit

DY 93671

7/8in (22 mm) W x 4-1/2in (114 mm) L 150 Grit A/O Hook-Face DynaCut Raised Panel Strip

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The premium film backing resists edge tearing and promotes better grain adhesion for longer useful life

$0.77

3-2/3in W x 7in L 100 Grit A/O Non-Vac. Hook-Face DynaCut, 50/MIN

DY 93801

3-2/3in (93 mm) W x 7in (178 mm) L 100 Grit A/O Non-Vacuum Hook-Face DynaCut Sheet

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.44

Tear Drop x 320 Grit A/O Non-Vacuum Hook-face Disc, MOQ/50

DY 93958

Tear Drop x 320 Grit A/O Non-Vacuum Hook-Face DynaCut Dynafine Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.32

75 mm W x 110mm L 150 Grit A/O Non-Vac. Hook-Face DynaCut, 50/MIN

DY 93785

75 mm W x 110 mm L 150 Grit A/O Non-Vacuum Hook-Face DynaCut Sheet

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$0.70

Triangle Abrasive Disc, 320 grit

DY 93988

Triangular x 320 Grit A/O Non-Vacuum PSA DynaCut Dynafine Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.23

Tear-Drop Abrasive Disc, 150 Grit

DY 93995

Tear Drop x 150 Grit A/O Non-Vacuum PSA DynaCut Dynafine Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.23

75 mm x 110mm, 150 Grit, Hook Face, Vacuum

DY 93890

75 mm W x 110 mm L 150 Grit A/O Vacuum Hook-Face DynaCut Sheet

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$0.70

3-2/3in W x 7in L 150 Grit A/O Non-Vac. Hook-Face DynaCut, 50/MIN

DY 93803

3-2/3in (93 mm) W x 7in (178 mm) L 150 Grit Non-Vacuum Hook-Face DynaCut Sheet

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.44

75mm x 110mm 180 Grit A/O Vacuum Hook-Face DynaCut Sheet

DY 93891

75 mm W x 110 mm L 180 Grit A/O Vacuum Hook-Face DynaCut Sheet

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$0.70

100 mm W x 148 mm L 400 Grit A/O Vacuum Hook-Face 7-Delta DynaCut Sheet

DY 93879

100 mm W x 148 mm L 400 Grit A/O Vacuum Hook-Face 7-Delta DynaCut Sheet

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.04

5inDIA. X 3/4in CH 40/50 GRIT GULLETED/SLOTTED DIAMOND CUT-OFF WHEEL

DY 93662

5in (127 mm) Diameter x 3/4in (19 mm) CH 40/50 Grit Gulleted/Slotted Diamond Cut-Off Wheel

The hardest mineral is a must for cutting and finishing materials harder than 60 Rockwell C such as thermal sprayed tungsten carbide, chrome oxide, glass, composites, stone, chilled iron and forged steel.

Excellent for cutting and trimming fiberglass and composite mold -flashing

$213.21

Tear-Drop Abrasive Disc, 320 Grit

DY 93999

Tear Drop x 320 Grit A/O Non-Vacuum PSA DynaCut Dynafine Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.23

100 mm W x 148 mm L 60 Grit A/O Vacuum Hook-Face

DY 93875

100 mm W x 148 mm L 60 Grit A/O Vacuum Hook-Face 7-Delta DynaCut Sheet

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.04

3-1/4 Inch Dia X 3 Inch W Standard Dynacushion Wheel

DY 94507

3-1/4in (83 mm) Diameter x 3in (76 mm) W Standard Dynacushion Pneumatic Wheel

Composite Hub, 5/8in Bore, For 3in (76 mm) W x 10-11/16in (271 mm) L Belt

$110.94

3 (76 MM) Dia. Straight-Line Type 1 Extension Wheel Grinder, 1 hp, 12, 000 RPM.

DY 52376

3in (76 mm) Diameter Straight-Line Type 1 Extension Wheel Grinder

1 hp, 12,000 RPM, Rear Exhaust, 3/8in -24 Spindle Thread

Type 1 Wheel Grinder, for cleaning metal, grinding and smoothing weld seams, removing imperfections before painting.

3in Diameter, Straight Line, 1 hp, 6in Extension, 12,000 RPM.

HP: 1.0
Max. RPM: 12000.0
Motor RPM: 12,000

$963.00

3 In Extended Cut Off Tool

DY 52537

3in (76 mm) Diameter Straight-Line Vacuum Extension Cut-Off Wheel Tool

1 hp, 18,000 RPM, Rear Exhaust, 3/8in -24 Spindle Thread

Vacuum Cut-Off Wheel Tool, for efficient cutting with dust and debris removal.

Ideal for 3in Diameter Diamond Cut-Off Wheels.

HP: 1.0
Max. RPM: 18000.0
Motor RPM: 18,000

$1,337.40

Die Grinder 1/4in Collet

DY 52290

.7 hp 7 Degree Offset Die Grinder

20,000 RPM, Gearless, Front Exhaust, Short Shank, 1/4in and 6mm Collets

High-Quality Air-Powered Die Grinder 7 Degree Offset, Long Shank, Gearless, Front Exhaust Model

Gearless for reduced maintenance and downtime.

HP: 0.7
Max. RPM: 20000.0
Motor RPM: 20000

$640.80

4 (102 MM) DIA. STRAIGHT-LINE TYPE 1 E

DY 52379

4in (102 mm) Diameter Straight-Line Type 1 Extension Wheel Grinder

1 hp, 12,000 RPM, Rear Exhaust, 3/8in -24 Spindle Thread

Type 1 Wheel Grinder, for cleaning metal, grinding and smoothing weld seams, removing imperfections before painting.

4in Diameter, Straight Line, 1 hp, 6in Extension, 12,000 RPM.

HP: 1.0
Max. RPM: 12000.0
Motor RPM: 12,000

$963.00

4 In R/A Grinder, 13, 500 Rpm

DY 52630

4in (102 mm) Diameter Right Angle Depressed Center Wheel Grinder

1.3 hp, 13,500 RPM, Rotational Exhaust, 3/8in -24 Spindle Thread

1.3 hp Depressed Center Wheel Grinder is ideal for fast weld and stock removal, heavy deburring, plus rust and scale removal.

13,500 RPM, 3/8in -24 Spindle Thread.

HP: 1.3
Max. RPM: 13500.0
Motor RPM: 13,200

$910.80

Die Grinder, 1/4 Collect, 20, 000 rpm

DY 52278

.7 hp Straight-Line Die Grinder

20,000 RPM, Extended Rear Exhaust, 1/4in and 6mm Collets

Includes 1/4in Collet Insert (50013), fits optional 1/8in (50065), 3/8in (50014), 6 mm (50016), 8 mm (50039)

Gearless for reduced maintenance and downtime.

HP: 0.7
Max. RPM: 20000.0
Motor RPM: 20000

$594.00

4 1/2 In R/A 1.3 HP 12, 000 RPM Grinder

DY 52632

4-1/2in (114 mm) Diameter Right Angle Depressed Center Wheel Grinder

1.3 hp, 12,000 RPM, Side Exhaust, 5/8in -11 Spindle Thread

1.3 hp Depressed Center Wheel Grinder is ideal for fast weld and stock removal, heavy deburring, plus rust and scale removal.

12,000 RPM, 5/8in -11 Spindle Thread.

HP: 1.3
Max. RPM: 12000.0
Motor RPM: 12,000

$910.80

Sander, 5in Dia, Vacuum, Disc.

DY 52596

5in (127 mm) Diameter Right Angle Disc Sander, Central Vacuum

1.3 hp, 12,000 RPM, Rotational Exhaust, 5/8in -11 Spindle Thread

Central Vacuum Model (52596) includes Dynabrade 1.3 hp Disc Sander (52635) with Vacuum Shroud (52744). Tool includes Backing Pad (51150) which has a 5in (127 mm) diameter, plus mounting hardware. Accepts optional 5in (127 mm) diameter Abrasive Discs with 7/8in (22 mm) center hole.

Tool has robust, governor-controlled 1.3 hp (970 W) air motor. Includes Conductive Hose and Cuffs, to shield operator from electrostatic discharge (ESD). Swivel Cuff (96004) improves maneuverability! Tool housing and handle are made of solid cast aluminum. Insulated throttle handle reduces cold air transmission.

HP: 1.3
Max. RPM: 12000.0
Motor RPM: 12,000

$1,017.90

Straight Line Cut Off Wheel Tool, 3 Inch

DY 52434

3in (76 mm) Diameter Straight-Line Cut-Off Wheel Tool

.5 hp, 20,000 RPM, Front Exhaust, 3/8in -24 Spindle Thread

Cut-Off Wheel Tool, for efficient cutting of sheet metal, frame rails, clamps, bolts, etc.

3in Diameter, Straight Line, .5 hp, 20,000 RPM, Front Exhaust.

HP: 0.5
Max. RPM: 20000.0
Motor RPM: 20000

$479.70

5 Inch R/A Grinder, 1.3 HP, 12000 RPM, 5/8-11 Spindle Thread

DY 52633

5in (127 mm) Diameter Right Angle Depressed Center Wheel Grinder

1.3 hp, 12,000 RPM, Rotational Exhaust, 5/8in -11 Spindle Thread

1.3 hp Depressed Center Wheel Grinder is ideal for fast weld and stock removal, heavy deburring, plus rust and scale removal.

12,000 RPM, 5/8in -11 Spindle Thread.

HP: 1.3
Max. RPM: 12000.0
Motor RPM: 12,000

$910.80

2in Dia. 7 Degree Offset Disc Sander, 5 hp, 20, 000 RPM, Ext. Rear Exhaust, Locking-Type Female Pad

DY 52405

2in (51 mm) Diameter 7 Degree Offset Disc Sander

.5 hp, 20,000 RPM, Extended Rear Exhaust, Locking-Type Female Pad

All models include 51344 Locking-Type Pad (2in diameter).

Also accept 3in diameter pads, sold separately.

HP: 0.7
Max. RPM: 20000.0
Motor RPM: 20000

$677.00

Right-angle 5 inch disc sander

DY 52635

5in (127 mm) Diameter Right Angle Disc Sander

1.3 hp, 12,000 RPM, Rotational Exhaust, 5/8in -11 Spindle Thread

Includes 51150 Backing Pad, 5in (127 mm) diameter, plus mounting hardware. Accepts optional 5in (127 mm) diameter Abrasive Discs with 7/8in (22 mm) center hole.

Dynabrade's 1.3 hp (970 W) Right Angle Sander offer countless grinding and material removal solutions to industries such as metal/stainless steel fabrication, composites, masonry, ironwork and general welding. Designed to the Dynabrade standard of excellence, these tools offer a wide array of features to increase efficiency and maximize operator comfort!Vibration Dampening Side Handle Specially designed to reduce vibration transfer to operator. Removable for left or right hand use. Rotational Exhaust System Rotates a full 360 degree to ensure that exhaust is directed away from operator.

HP: 1.3
Max. RPM: 12000.0
Motor RPM: 12,000

$844.20

5 In Right Angle Vacuum Cutoff Tool

DY 52615

5in (127mm) Diameter Right Angle Vacuum Cut-Off Wheel Tool

1.3 hp, 12,000 RPM, Rotational Exhaust, 3/8in -24 Spindle Thread

Tool accepts optional 5in (127 mm) Diameter Diamond Cut-Off Wheels with 3/4in (19 mm) Diameter center hole. Adjustable wheel guard has vacuum port 1-1/4in (32 mm) outside Diameter that diverts airborne dust and debris to optional vacuum source. Excellent for efficient cutting with capture of dust and debris. Ideal for use on fiberglass and composites.

Non-marring composite base is removable to utilize maximum blade depth of 1-3/16in (30 mm). Optional composite base is available for scoring. Shroud/Guide Plate design allows cutting as close as 1/8in (3 mm) to leading edge of work piece.

HP: 1.3
Max. RPM: 12000.0
Motor RPM: 12,000

$1,311.30

5in Right Angle Grinder

DY 52639

5in (127 mm) Diameter Right Angle Depressed Center Wheel Grinder

1.3 hp, 12,000 RPM, Rotational Exhaust, M14 x 2 Spindle Thread

1.3 hp Depressed Center Wheel Grinder is ideal for fast weld and stock removal, heavy deburring, plus rust and scale removal.

12,000 RPM, M14 x2 Spindle Thread.

HP: 1.3
Max. RPM: 12000.0
Motor RPM: 12,000

$910.80

Disc Sander, 1.3 HP, 12000 RPM

DY 52634

4-1/2in (114 mm) Diameter Right Angle Disc Sander

1.3 hp, 12,000 RPM, Rotational Exhaust, 5/8in -11 Spindle Thread

Includes 51148 Backing Pad, 4-1/2in (114 mm) diameter, plus mounting hardware. Accepts optional 4-1/2in (114 mm) diameter Abrasive Discs with 7/8in (22 mm) center hole.

Dynabrade?s 1.3 hp (970 W) Right Angle Sander offer countless grinding and material removal solutions to industries such as metal/stainless steel fabrication, composites, masonry, ironwork and general welding. Designed to the Dynabrade standard of excellence, these tools offer a wide array of features to increase efficiency and maximize operator comfort!Vibration Dampening Side Handle Specially designed to reduce vibration transfer to operator. Removable for left or right hand use. Rotational Exhaust System Rotates a full 360 degree to ensure that exhaust is directed away from operator.

HP: 1.3
Max. RPM: 12000.0
Motor RPM: 12,000

$844.20

7 In R/A 1.3 HP 6, 000 RPM Sander

DY 52657

7in (178 mm) Diameter Right Angle Disc Sander

1.3 hp, 6,000 RPM, Rotational Exhaust, 5/8in -11 Spindle Thread

Includes 51151 Backing Pad, 7in (178 mm) diameter, plus mounting hardware. Accepts optional 7in (178 mm) diameter Abrasive Discs with 7/8in (22 mm) center hole.

Dynabrade's 1.3 hp (970 W) Right Angle Sander offer countless grinding and material removal solutions to industries such as metal/stainless steel fabrication, composites, masonry, ironwork and general welding. Designed to the Dynabrade standard of excellence, these tools offer a wide array of features to increase efficiency and maximize operator comfort!Vibration Dampening Side Handle Specially designed to reduce vibration transfer to operator. Removable for left or right hand use. Rotational Exhaust System Rotates a full 360 degree to ensure that exhaust is directed away from operator.

HP: 1.3
Max. RPM: 6000.0
Motor RPM: 6,000

$996.30

1 STRAIGHT-LINE DIE GRINDER

DY 52665

1 hp Straight-Line Die Grinder

9,000 RPM, Gearless, Rear Exhaust, 1/4in and 6mm Collets

Includes 1/4in Collet Insert (50013), fits optional 1/8in (50065), 3/8in (50014), 6 mm (50016), 8 mm (50039)

Gearless for reduced maintenance and downtime.

HP: 1.0
Max. RPM: 9000.0
Motor RPM: 9000

$642.60