Bits and Sockets

IR RR10015S

1" Square Thu-Hole Socket Retainer

Product Application and Uses:

For use with Ingersoll Rand 2922P1 Air Impact Wrench.

• Drive Size (in): 1
• Drive Type: Square

• Retainer Type: Friction Ring and Thru-hole

• For Use With: 2922P1
• For Use With: 2934B2
• For Use With: 2934P2

STR 809233

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809234

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809306

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

Z2917

Z2935

Z3850

AJ 945

AX 17MM15

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.265 lb
• Diameter Drive End (C): 28.6 mm
• Diameter Nose End (B): 28.6 mm

• Hex Opening: 17 mm
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 11.1 mm
• Opening Modifier: 6 Point Hex

• Overall Length A: 38.1 mm
• Set: No

AX 185-0X

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.011 lb
• Cap Screw Size: 2,3

• Drive: Hex Insert
• Fastener Type: Socket Head
• Flathead Screw Size: 5,6

• Hex Size: 5/64 in

• Overall Length: 1.0 in, 25.0 mm
• Set: No
• Set Screw Size: 8

AX 1950-1X

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Weight: 0.018 lb

• Drive: Hex Power Drive
• Fastener Type: Square Recess

• Nominal Size: 3/32 in

• Overall Length: 1.93 in, 49.0 mm
• Point Size: 1
• Set: No

AX 21MM17

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Thin Wall

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Thin Wall

• Weight: 0.606 lb
• Diameter Drive End (C): 38.1 mm
• Diameter Nose End (B): 34.9 mm

• Hex Opening: 21 mm
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 13.5 mm
• Opening Modifier: 6 Point Hex

• Overall Length A: 51 mm
• Set: No

AX 24MM17

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Thin Wall

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Thin Wall

• Weight: 0.580 lb
• Diameter Drive End (C): 38.1 mm
• Diameter Nose End (B): 38.1 mm

• Hex Opening: 24 mm
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 15.9 mm
• Opening Modifier: 6 Point Hex

• Overall Length A: 51 mm
• Set: No

AX 440-TX-27X

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Reduced Diamater Nose for Limited Clearance Applications
• Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Reduced Diamater Nose for Limited Clearance Applications
• Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

• Weight: 0.012 lb

• Drive: Hex Insert
• Drive Size: T-27
• Fastener Type: Torx

• Measurement Across Lobes: .195 in

• Overall Length: 1.0 in, 25.0 mm
• Set: No
• SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

AX 446-1X

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Reduced Diamater Nose for Limited Clearance Applications

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Reduced Diamater Nose for Limited Clearance Applications

• Weight: 0.010 lb

• Drive: Hex Insert
• Fastener Type: Phillips

• Overall Length: 1.0 in, 25.0 mm
• Point Size: 1
• Screw Size: 2,3,4
• Set: No
• SKU Group Note: ACR is a trademark of the Phillips Screw Co.

AX 446-3X

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Reduced Diamater Nose for Limited Clearance Applications

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Reduced Diamater Nose for Limited Clearance Applications

• Weight: 0.012 lb

• Drive: Hex Insert
• Fastener Type: Phillips

• Overall Length: 1.0 in, 25.0 mm
• Point Size: 3
• Screw Size: 12,14
• Set: No
• SKU Group Note: ACR is a trademark of the Phillips Screw Co.

AX 491X

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Weight: 0.018 lb

• Drive: Hex Power Drive
• Fastener Type: Phillips

• Overall Length: 1.93 in, 49.0 mm
• Point Size: 1
• Set: No

AX 49-B-TX-15

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks
• Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks
• Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

• Weight: 0.024 lb

• Drive: Hex Power Drive
• Drive Size: T-15
• Fastener Type: Torx

• Measurement Across Lobes: .128 in

• Overall Length: 3.5 in, 89.0 mm
• Set: No
• SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

AX 552X

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.016 lb

• Drive: Screw Shank Drive
• Fastener Type: Phillips

• Overall Length: 1.18 in, 30.0 mm
• Point Size: 2
• Set: No

AX 55-TX-20

• Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

• Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

• Weight: 0.010 lb

• Drive: Screw Shank Drive
• Drive Size: T-20
• Fastener Type: Torx

• Measurement Across Lobes: .151 in

• Overall Length: 1.18 in, 30.0 mm
• Set: No
• SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

AX AM-04-A-6

AX AM-05

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Weight: 0.023 lb

• Drive: Hex Power Drive
• Fastener Type: Socket Head

• Hex Size: 5/32 in

• Overall Length: 1.93 in, 49.0 mm
• Set: No

AX AM-06-6

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Weight: 0.085 lb

• Drive: Hex Power Drive
• Fastener Type: Socket Head

• Hex Size: 3/16 in

• Overall Length: 6.0 in, 152.0 mm
• Set: No

AX AMB1SQ2-50

AX AMB2SQ2-50