Airpower | Bits and Sockets

OE 19MM, SPH

STR 853871

Slim Profile Open End Interchangeable Heads for Torque Wrenches

Model	:	OE 19 MM, SPH
Capacity	:	45 Nm
Dimensions Insert	:	19 mm

A	:	47.5 mm
B	:	40.01 mm
C	:	4.50 mm
D	:	25.40 mm
E	:	20.62 mm

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$186.95

6 X 1 1/2 WIDE ANGLE CHSL

Z2980

6 X 1 1/2 WIDE ANGLE CHSL

$12.45

HAMMER-1" DIAM.

AJ 945

HAMMER-1" DIAM.

$22.20

BIT 1/4 HEX PWRDR #1 ROB-SQ 1-15/16in 49MM

AX 1950-1X

BIT 1/4HEX PWRDR #1 ROB-SQ 1-15/16" 49MM
1/4" Hex Power Drive - Turned Body - Square Recess Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.018 lb

Drive: Hex Power Drive
Fastener Type: Square Recess

Nominal Size: 3/32 in

Overall Length: 1.93 in, 49.0 mm
Point Size: 1
Set: No

$3.56

1/4 Hex Drive X #1 Phillips X 1-15/16

AX 491X

BIT 1/4 HEX PWR DR #1 PH 1-15/16" 49MM
1/4" Hex Power Drive

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.018 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 1.93 in, 49.0 mm
Point Size: 1
Set: No

$2.60

1/4 Hex Drive X T-15 Torx Hex X 3-1/2

AX 49-B-TX-15

BIT 1/4 HEX PWRDR T15 TX 3-1/2" 89MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.024 lb

Drive: Hex Power Drive
Drive Size: T-15
Fastener Type: Torx

Measurement Across Lobes: .128 in

Overall Length: 3.5 in, 89.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$9.76

1/4 Hex Power Drive T-45 TX 1-15/16, 49MM

AX 49-TX-45

BIT 1/4 HEX PWR DR T-45 TX 1-15/16" 49MM
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.035 lb

Drive: Hex Power Drive
Drive Size: T-45
Fastener Type: Torx

Measurement Across Lobes: .304 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$36.89

12-24 Torx Screw Shank X T-20 X 1-3/16

AX 55-TX-20

BIT 12-24 THD DR T20 TX 1-3/16" 30MM OAL
12-24 Screw Shank Drive - Torx Bits

Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.010 lb

Drive: Screw Shank Drive
Drive Size: T-20
Fastener Type: Torx

Measurement Across Lobes: .151 in

Overall Length: 1.18 in, 30.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$12.96

1/4 Bit X 4mm

AX AM-04-A-6

1/4 Bit X 4mm

$51.77

1/4 Hex-Allen Socket Head X 5/32 Hex

AX AM-05

BIT 1/4 HEX PWRDR 5/32" HEX 1-15/16" 49MM
1/4" Hex Power Drive - Socket Head Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.023 lb

Drive: Hex Power Drive
Fastener Type: Socket Head

Hex Size: 5/32 in

Overall Length: 1.93 in, 49.0 mm
Set: No

$8.30

1/4 Hex-Allen Socket Head X 3/16 Hex

AX AM-06-6

BIT 1/4 HEX PWRDR 3/16" HEX 6" 152MM OAL
1/4" Hex Power Drive - Socket Head Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.085 lb

Drive: Hex Power Drive
Fastener Type: Socket Head

Hex Size: 3/16 in

Overall Length: 6.0 in, 152.0 mm
Set: No

$44.71

Apex Ind. 1in Square SQ2, 50 Minimum

AX AMB1SQ2-50

Apex Ind. 1in Square SQ2, 50 Minimum

$0.60

special order Apex Ind. 2in Square PWR DRV SQ2, 50 Minimum

AX AMB2SQ2-50

special order Apex Ind. 2in Square PWR DRV SQ2, 50 Minimum

$0.89

Apex Ind. 3.5in Phillips PWR DRV PH2, 25 Minimum

AX AMB3BPH2-25

Apex Ind. 3.5in Phillips PWR DRV PH2, 25 Minimum

$1.32

3/8 Sq Drive Socket X 10mm Hex X 31.8mm

AX M-10MM13

SCKT 3/8 SQ DR 10MM HEX 31.8MM OAL MAG
3/8" Drive - Metric - Magnetic, Short & Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.103 lb
Diameter Drive End (C): 19.1 mm
Diameter Nose End (B): 16.8 mm

Hex Opening: 10 mm
Magnetism: Magnetic

Opening Depth (D) (in): 6.4 mm
Opening Modifier: 6 Point Hex

Overall Length A: 31.8 mm
Set: No

$22.08

Sckt 3/8 Sq Dr 11mm Hex 31.8mm OAL MAG, 12/min

AX M-11MM13

SCKT 3/8 SQ DR 11MM HEX 31.8MM OAL MAG
3/8" Drive - Metric - Magnetic, Short & Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.107 lb
Diameter Drive End (C): 19.1 mm
Diameter Nose End (B): 17.5 mm

Hex Opening: 11 mm
Magnetism: Magnetic

Opening Depth (D) (in): 7.2 mm
Opening Modifier: 6 Point Hex

Overall Length A: 31.7 mm
Set: No

$25.22

1/4 Sq. Dr Socket X 7/16, 6 Pt Hex, Magnetic, 12/Min

AX M-1214

SCKT 1/4 SQ DR 7/16 HEX 1-3/4 OAL MAG
1/4" Drive - SAE - Magnetic, Long & Extra Long Length, 6 Point

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

Weight: 0.099 lb
Diameter Drive End (C): 5/8 in
Diameter Nose End (B): 5/8 in

Hex Opening: 7/16 in
Magnetism: Magnetic

Opening Depth (D) (in): 9/32 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-3/4 in
Set: No

$24.57

3/8 Sq Drive Socket X 8mm Hex X 31.8mm

AX M-8MM13

SCKT 3/8 SQ DR 8MM HEX 1.250" OAL MAG
3/8" Drive - Metric - Magnetic, Short & Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.090 lb
Diameter Drive End (C): 19.1 mm
Diameter Nose End (B): 12.7 mm

Hex Opening: 8 mm
Magnetism: Magnetic

Opening Depth (D) (in): 4.8 mm
Opening Modifier: 6 Point Hex

Overall Length A: 31.8 mm
Set: No

$20.89

Universal Wrench, Standard 1/2in Fem. S

AX MF-55-B

Universal Wrench, Standard 1/2in Fem. S

$176.12

3/4in Sq Dr Univ. Adapter

AX MF-75-B

3/4in Sq Dr Univ. Adapter

$287.30

Covered Socket, Nylon, 5/8, 1/2 Sq Dr., 12/Minimun

AX NC-5220

Covered Socket, Nylon, 5/8, 1/2 Sq Dr., 12/Minimun

$155.72

1/2 Sq. Drv Bit Holder Adapter X 5/8 Hex

AX SC-520

ADAP 1/2 SQ DR 5/8 FEMALE HEX 1-1/2" OAL
Bit Holders/Adapters with Set Screw or Thru Hole

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.276 lb
Body Diameter (D): 1-1/8 in, 29 mm

Hex Open. (A): 5/8 in
Magnetism: Non-Magnetic

Opening Depth (E): 11/16 in, 17 mm

Set: No

$31.11

1/2 Sq. Drive Socket Head Bit X 6mm Hex

AX SZ-5-7-6MM

BIT 1/2 SRV DR 6MM HEX 2-1/2" 64MM OAL
1/2" Drive Metric Socket Head Adapters & Inserts

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.311 lb
Bit Length (A): 7/8 in, 22 mm

Fastener Type: Socket Head

Hex Size: 6 mm

Overall Length: 2.5 in, 63.0 mm
Set: No

$24.79

1/2 Drive External Torx Socket X E-20

AX TX-5120

SCKT 1/2 SQ DR E20 TORX 1-1/2" OAL
1/2" Drive - Torx - For External Torx Screws

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.072 lb
Diameter Drive End (C): 1-3/16 in, 30 mm
Diameter Nose End (B): 1 in, 25 mm

Driver Size: E-20

Magnetism: Non-Magnetic

Opening Modifier: Torx

Overall Length A: 1-1/2 in, 38 mm
Set: No

$160.06

UGuard 1/4 Sq Dr x 10mm Hex

AX UG-10MM21

SCKT CVRD 1/4 SQ DR 10MM HEX 45.2MM OAL
1/4" Drive Metric u-GUARD Non-Magnetic Covered Sockets

Weight: 0.369 lb

Drive End Sex: F
Drive End Type: Square
Drive Size: 1/4 in
Fastener End Sex: F
Fastener End Size: 10 mm
Fastener End Type: Hex

Magnetism: Non-Magnetic

Metal Socket Number: 10MM21
Opening Modifier: 6 Point Hex

Set: No

$90.23