Bits and Sockets

View as Grid List

Sort by

Display items per page

3/4 Male Sq. Extension X 2-1/4, Drill

AX EX-753

EXT 3/4 SQ DR 3/4 SQ 2-1/4 OAL
3/4" Drive - 2 1/4" to 15" (57mm to 381mm) Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

Weight: 0.547 lb
Description: Female sq. to Male sq.

Male Square Drive (in): 3/4 in

Overall Length: 2.25 in, 57.0 mm
Set: No

$106.52

3/4 Male Sq. Extension X 2-1/4, Ball

AX EX-753-B

EXT 3/4 SQ DR 3/4 SQ 2-1/4 OAL BALL LOCK
3/4" Drive - 2 1/4" to 15" (57mm to 381mm) Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

Weight: 0.535 lb
Description: Female sq. to Male sq.

Male Square Drive (in): 3/4 in

Overall Length: 2.25 in, 57.0 mm
Set: No

$95.29

3/4 Male Sq. Drive Extension X 4, Ball

AX EX-755-B-4

EXT 3/4" SQ DR 3/4" SQ 4" OAL BALL LOCK
3/4" Drive - 2 1/4" to 15" (57mm to 381mm) Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

Weight: 0.019 lb
Description: Female sq. to Male sq.

Male Square Drive (in): 3/4 in

Overall Length: 4.0 in, 102.0 mm
Set: No

$116.55

1/2 Sq Drv 11/16 FM Hex U-Guard CVR, 12/Min

AX UG-5222

1/2 Sq Drv 11/16 FM Hex U-Guard CVR, 12/Min

$115.94

RET RING

IR RR10034S

3/4" Square Socket Retainer

Product Application and Uses: For use with Ingersoll Rand 2922P3 Air Impact Wrench.
Drive Size (in): 3/4
Drive Type: Square
Retainer Type: Friction Ring and Thru-hole

For Use With

2146Q1MAX
2920B1
2920B1-EU
2920B9
2920B9-EU
2922P3

$15.00

Tru Dr. 10mm Hex 3/8 Sq. Drive 12mm Shaft

MOM 1-10TD12

Tru Dr. 10mm Hex 3/8 Sq. Drive 12mm Shaft

$74.70

Open End Head, OE-18mm Head Only

STR 809228

Open End Interchangeable Heads for Torque Wrenches

Model	:	OE-18 mm
Capacity	:	90
Dimensions Insert	:	18

A	:	48.26 mm
B	:	40.64 mm
C	:	10.16 mm
D	:	22.86 mm
E	:	17.78 mm

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$109.60

Open End Head, OE-27mm Head Only

STR 809229

Open End Interchangeable Heads for Torque Wrenches

Model	:	OE-27 mm
Capacity	:	254
Dimensions Insert	:	27

A	:	55.88 mm
B	:	58.42 mm
C	:	12.70 mm
D	:	33.02 mm
E	:	20.32 mm

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$135.69

Open End OE-3/8 Head Only

STR 819002

Open End Interchangeable Heads for Torque Wrenches

Model	:	OE 3/8
Capacity	:	200 lbf in
Dimensions Insert	:	3/8 in

A	:	1.8 in
B	:	1.1 in
C	:	0.3 in
D	:	0.8 in
E	:	0.7 in

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$104.38

FN, 3/8 Flare Nut Interchangeable Heads for Torque Wrenches, in.

STR 819027

Flare Nut Interchangeable Heads for Torque Wrenches

Model	:	FN 3/8
Capacity	:	200 lbf in
Dimensions Insert	:	3/8 in

A	:	1.8 in
B	:	0.8 in
C	:	0.4 in
D	:	0.8 in
E	:	0.8 in

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$116.55

BH 5/16, Interchangeable Head

STR 819061

Box Head Interchangeable Heads for Torque Wrenches

Model	:	BH 5/16
Capacity	:	350 lbf in
Dimensions Insert	:	5/16 in

A	:	1.7 in
B	:	035 in
C	:	0.3 in
D	:	0.8 in
E	:	0.8 in

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$111.33

Box Head BH-1/2 Head Only

STR 819064

Box Head Interchangeable Heads for Torque Wrenches

Model	:	BH 1/2
Capacity	:	850 lbf in
Dimensions Insert	:	1/2 in

A	:	1.8 in
B	:	0.8 in
C	:	0.4 in
D	:	0.8 in
E	:	0.8 in

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$116.55

Square Drive SD-3/4 Head Only

STR 819119

Square Drive Interchangeable Heads for Torque Wrenches

Model	:	SD 3/4-3 7/8
Capacity	:	4800 lbf in
Dimensions Insert	:	3/4-3-7/8 in

A	:	0.75 in
B	:	4.6 in
C	:	1.5 in
D	:	1.4 in
E	:	1.5 in

Product Description

1 7 16 Common Centerline / 36.5 mm Common Centerline
819119: 3 7 8 Common Centerline / 984mm Common Centerline

$528.80

SDRF 1/4

STR 819341

Fine-tooth Ratchet Interchangeable Head

Model	:	SDRF 1/4
Capacity	:	250 lbf in
Square	:	1/4 in

A	:	2.32 in
B	:	0.90 in
C	:	0.75 in
D	:	0.88 in
E	:	0.69 in

Product Description

4.5 degrees of swing arc required to engage the next tooth
Smooth operation
Highly durable with black oxide exterior
Easy to rebuild with our fine-tooth ratchet renewal kit
Sealed compartment to protect the gear from debris
Both sizes feature a sealed compartment with reverse lever on back
625% shorter swing length compared to coarse 30-tooth ratchet

$168.36

OE 1 17/16

STR 819726

Open End Interchangeable Heads for Torque Wrenches

Model	:	OE 1 7/16
Capacity	:	4800 lbf in
Dimensions Insert	:	1-7/16 in

A	:	4-39/64 in
B	:	2-15/16 in
C	:	5/8 in
D	:	1-1/2 in
E	:	1 in

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$591.43

OE 1-5/8

STR 819729

Open End Interchangeable Heads for Torque Wrenches

Model	:	OE 1 5/8
Capacity	:	4800 lbf in
Dimensions Insert	:	1-5/8 in

A	:	4-9/16 in
B	:	2-15/16 in
C	:	5/8 in
D	:	1-1/2 in
E	:	1 in

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$591.43

OE 41MM

STR 819755

Open End Interchangeable Heads for Torque Wrenches

Model	:	OE-41 mm
Capacity	:	400
Dimensions Insert	:	41

A	:	116.68 mm
B	:	74.61 mm
C	:	15.88 mm
D	:	38.1 mm
E	:	25.4 mm

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$678.39

Open End OE-14mm Head Only

STR 819946

Open End Interchangeable Heads for Torque Wrenches

Model	:	OE-14 mm
Capacity	:	45
Dimensions Insert	:	14

A	:	48.26 mm
B	:	33.02 mm
C	:	10.16 mm
D	:	20.32 mm
E	:	17.78 mm

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$109.60

OE 19mm

STR 819949

Open End Interchangeable Heads for Torque Wrenches

Model	:	OE-19 mm
Capacity	:	113
Dimensions Insert	:	19

A	:	50.8 mm
B	:	45.72 mm
C	:	12.70 mm
D	:	25.40 mm
E	:	17.78 mm

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$109.60

Open End OE-21mm Head Only

STR 819950

Open End Interchangeable Heads for Torque Wrenches

Model	:	OE-21 mm
Capacity	:	140
Dimensions Insert	:	21

A	:	50.8 mm
B	:	45.72 mm
C	:	12.70 mm
D	:	25.40 mm
E	:	20.32 mm

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$120.02

Open End OE-24mm Head Only

STR 819952

Open End Interchangeable Heads for Torque Wrenches

Model	:	OE-24 mm
Capacity	:	197
Dimensions Insert	:	24

A	:	50.8 mm
B	:	53.34 mm
C	:	12.70 mm
D	:	33.02 mm
E	:	20.32 mm

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$126.98

3/8 Ratchet Head

STR 853395

Smal Ratchet Body with Larger Drive Size, inches

Model	:	SDRT 3/8 with 1/2 Square Drive
Capacity	:	1250 lbf in
Square	:	3/8 with 1/2 in

A	:	2.00 in
B	:	1.50 in
C	:	1.25 in
D	:	1
E	:	0.5625

Product Description

1 7 16 Common Centerline / 36.5 mm Common Centerline

$263.22

OE 46MM

STR 853545

Open End Interchangeable Heads for Torque Wrenches

Model	:	OE-46 mm
Capacity	:	400
Dimensions Insert	:	46

A	:	125.41 mm
B	:	110.33 mm
C	:	15.88 mm
D	:	38.1 mm
E	:	25.4 mm

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$587.64

OE 19MM, SPH

STR 853871

Slim Profile Open End Interchangeable Heads for Torque Wrenches

Model	:	OE 19 MM, SPH
Capacity	:	45 Nm
Dimensions Insert	:	19 mm

A	:	47.5 mm
B	:	40.01 mm
C	:	4.50 mm
D	:	25.40 mm
E	:	20.62 mm

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$205.64

6 X 1 1/2 WIDE ANGLE CHSL

Z2980

6 X 1 1/2 WIDE ANGLE CHSL

$12.45