Menu
Search
Search Close
Shopping cart Close

You have no items in your shopping cart.

All Categories
    Menu Close

    Bits and Sockets

    View as Grid List
    Sort by
    Display items per page
    STR 819009.jpg

    Open End OE-13/16 Head Only

    STR 819009

    STR 819009

    Open End Interchangeable Heads for Torque Wrenches

    Model: OE 13/16
    Capacity: 1250 lbf in
    Dimensions Insert: 13/16 in

    A: 2.0 in
    B: 1.8 in
    C: 0.5 in
    D: 1.0 in
    E: 0.8 in

    Product Description

    • One piece, cast, proprietary steel selection
    • All of our heads fit on all of our wrenches
    • Our smallest head fits on our largest wrench
    • Our largest head fits on our smallest wrench
    • Fewer wrenches to buy, calibrate, repair, and manage
    • No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
    • Sturtevant Richmont interchangeable heads have two common centerlines
    • Typically for sizes 32 mm and below the common centerline is 365 mm
    • Sizes larger than 33 mm the common centerline extends to 984 mm
    $109.11
    STR 819945.jpg

    OE 13mm

    STR 819945

    STR 819945

    Open End Interchangeable Heads for Torque Wrenches

    Model: OE-13 mm
    Capacity: 39
    Dimensions Insert: 13

    A: 48.26 mm
    B: 33.02 mm
    C: 10.16 mm
    D: 20.32 mm
    E: 17.78 mm

    Product Description

    • One piece, cast, proprietary steel selection
    • All of our heads fit on all of our wrenches
    • Our smallest head fits on our largest wrench
    • Our largest head fits on our smallest wrench
    • Fewer wrenches to buy, calibrate, repair, and manage
    • No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
    • Sturtevant Richmont interchangeable heads have two common centerlines
    • Typically for sizes 32 mm and below the common centerline is 365 mm
    • Sizes larger than 33 mm the common centerline extends to 984 mm
    $99.63
    STR 819951.jpg

    OE 22mm

    STR 819951

    STR 819951

    Open End Interchangeable Heads for Torque Wrenches

    Model: OE-22 mm
    Capacity: 169
    Dimensions Insert: 22

    A: 50.8 mm
    B: 53.34 mm
    C: 12.70 mm
    D: 33.02 mm
    E: 20.32 mm

    Product Description

    • One piece, cast, proprietary steel selection
    • All of our heads fit on all of our wrenches
    • Our smallest head fits on our largest wrench
    • Our largest head fits on our smallest wrench
    • Fewer wrenches to buy, calibrate, repair, and manage
    • No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
    • Sturtevant Richmont interchangeable heads have two common centerlines
    • Typically for sizes 32 mm and below the common centerline is 365 mm
    • Sizes larger than 33 mm the common centerline extends to 984 mm
    $109.11
    Picture of 7/8 X 3 1/4 CLAYSPADE

    7/8 X 3 1/4 CLAYSPADE

    Z3070

    Z3070

    7/8 X 3 1/4 CLAYSPADE
    $139.60
    Picture of Socket, Allen Head, 1/2 x 10mm

    Socket, Allen Head, 1/2 x 10mm

    AIM A410C

    AIM A410C

    Socket, Allen Head, 1/2 x 10mm
    $0.00
    AX 3212.jpg

    3/8 Sq. Drive Socket X 3/8 6 Pt Hex

    AX 3212

    AX 3212

    SCKT 3/8" SQ DR 3/8" HEX 2" OAL
    3/8" Drive - SAE - 6 Point & Double Hex, Long and Extra Long Length
    • Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
    • Made in the USA - Quality and Availability
    • High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
    • Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
    • Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
    • No ring groove.
    • Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
    • Made in the USA - Quality and Availability
    • High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
    • Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
    • Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
    • No ring groove.
    • Weight: 0.001 kg
    • Diameter Drive End (C): 3/4 in
    • Diameter Nose End (B): 19/32 in
    • Hex Opening: 3/8 in
    • Opening Depth (D) (in): 1/4 in
    • Overall Length A: 2 in
    • Set: No
    $15.33
    AX 446-23T.jpg

    1/4 Hex Insert Bit X #2 Phillips X 3

    AX 446-23T

    AX 446-23T

    BIT 1/4 HEX INS #2 PH 3" 76MM OAL
    1/4" Hex Insert Bits - Limited Clearance - Phillips Bits
    • Made in the USA - Quality and Availability
    • Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
    • Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
    • Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
    • Reduced Diamater Nose for Limited Clearance Applications
    • Made in the USA - Quality and Availability
    • Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
    • Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
    • Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
    • Reduced Diamater Nose for Limited Clearance Applications
    • Weight: 0.027 lb
    • Drive: Hex Insert
    • Fastener Type: Phillips
    • Overall Length: 3.0 in, 76.0 mm
    • Point Size: 2
    • Set: No
    • SKU Group Note: ACR is a trademark of the Phillips Screw Co.
    $3.37
    Picture of 1/4 Hex Drive X T-30 Torx Hex X 3-1/2

    1/4 Hex Drive X T-30 Torx Hex X 3-1/2

    AX 49-B-TX-30

    AX 49-B-TX-30

    BIT 1/4 HEX PWRDR T30 TX 3-1/2" 89MM OAL
    1/4" Hex Power Drive - Torx Bits
    • Made in the USA - Quality and Availability
    • Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
    • Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
    • Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
    • Power Bits Are Best Used With Quick-Release (QR series) Chucks
    • Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.
    • Made in the USA - Quality and Availability
    • Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
    • Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
    • Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
    • Power Bits Are Best Used With Quick-Release (QR series) Chucks
    • Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.
    • Weight: 0.043 lb
    • Drive: Hex Power Drive
    • Drive Size: T-30
    • Fastener Type: Torx
    • Long Description: 1/4", Hex Power Drive
    • Measurement Across Lobes: .216 in
    • Overall Length: 3.5 in, 89.0 mm
    • Set: No
    • SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.
    $9.76
    Picture of 3/4 Sq. Drive Socket X 1-1/2 6 Pt Hex, 12/Minimum

    3/4 Sq. Drive Socket X 1-1/2 6 Pt Hex, 12/Minimum

    AX 7148

    AX 7148


    3/4" Drive - SAE - 6 Point & Double Hex, Standard Length
    • Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
    • Made in the USA - Quality and Availability
    • High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
    • Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
    • Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
    • Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
    • Made in the USA - Quality and Availability
    • High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
    • Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
    • Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
    • Diameter Drive End (C): 2-1/8 in
    • Diameter Nose End (B): 2-1/4 in
    • Hex Opening: 1-1/2 in
    • Magnetism: Non-Magnetic
    • Opening Depth (D) (in): 1 in
    • Opening Modifier: 6 Point Hex
    • Overall Length A: 2-1/4 in
    $104.21
    Picture of 1/4 Hex-Allen Socket Head X 5mm Hex

    1/4 Hex-Allen Socket Head X 5mm Hex

    AX AM-5MM

    AX AM-5MM

    BIT 1/4 HEX PWR DR 5MM HEX 1-15/16" 49MM
    1/4" Hex Power Drive - Metric - Socket Head Bits
    • Made in the USA - Quality and Availability
    • Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
    • Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
    • Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
    • Power Bits Are Best Used With Quick-Release (QR series) Chuck
    • Test
    • Made in the USA - Quality and Availability
    • Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
    • Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
    • Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
    • Power Bits Are Best Used With Quick-Release (QR series) Chuck
    • Test
    • Weight: 0.023 lb
    • Drive: Hex Power Drive
    • Fastener Type: Socket Head
    • Hex Size: 5 mm
    • Overall Length: 1.93 in, 49.0 mm
    • Set: No
    $9.96
    Picture of Apex Ind. 2in Phillips PWR DRV PH2, 50 Minimum

    Apex Ind. 2in Phillips PWR DRV PH2, 50 Minimum

    AX AMB2PH2-50

    AX AMB2PH2-50

    Apex Ind. 2in Phillips PWR DRV PH2, 50 Minimum
    $0.89
    Picture of Apex Ind. 1-7/8in Mag. N-Setter 1/4in, 25 Minimum

    Apex Ind. 1-7/8in Mag. N-Setter 1/4in, 25 Minimum

    AX AMN1C16-25

    AX AMN1C16-25

    Apex Ind. 1-7/8in Mag. N-Setter 1/4in, 25 Minimum
    $2.93
    Picture of Apex Ind. 2-9/16in Mag. N-Setter 1/4in, 25 Minimum

    Apex Ind. 2-9/16in Mag. N-Setter 1/4in, 25 Minimum

    AX AMN2B16-25

    AX AMN2B16-25

    Apex Ind. 2-9/16in Mag. N-Setter 1/4in, 25 Minimum
    $3.36
    Picture of Apex Ind. 2-9/16in Mag. N-Setter 5/16in, 25 Minimum

    Apex Ind. 2-9/16in Mag. N-Setter 5/16in, 25 Minimum

    AX AMN2B20-25

    AX AMN2B20-25

    Apex Ind. 2-9/16in Mag. N-Setter 5/16in, 25 Minimum
    $3.63
    AX EX-250-2.jpg

    1/4 Male Sq. Hex Extension X 2, Pin

    AX EX-250-2

    AX EX-250-2

    EXT 1/4 MALE HEX DR 1/4 SQ 2" OAL
    Male Hex Drive with 1/4" Male Square - Hex Extensions
    • Made in the USA - Quality and Availability
    • Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
    • Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
    • Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
    • Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
    • Made in the USA - Quality and Availability
    • Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
    • Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
    • Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
    • Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
    • Weight: 0.033 lb
    • Description: male hex to male sq
    • Hex Drive: 1/4 in
    • Magnetism: Non-Magnetic
    • Overall Length: 2.0 in, 51.0 mm
    • Set: No
    $11.16
    AX EX-376-B-2.jpg

    3/8 Male Sq. Drive Extension X 2, Ball

    AX EX-376-B-2

    AX EX-376-B-2

    EXT 3/8" SQ DR 3/8" SQ 2" OAL BALL LOCK
    3/8" Drive - 1 1/4" to 18" (32mm to 457mm) Length
    • Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
    • Made in the USA - Quality and Availability
    • High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
    • Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
    • Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
    • Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
    • Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
    • Made in the USA - Quality and Availability
    • High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
    • Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
    • Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
    • Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
    • Weight: 0.346 lb
    • Description: Female sq. to Male sq.
    • Male Square Drive (in): 3/8 in
    • Overall Length: 2.0 in, 51.0 mm
    • Set: No
    $24.89
    AX EX-500-4.jpg

    Adaptor, 1/4 Hex Dr X 1/2 Male Sq., 4in OAL

    AX EX-500-4

    AX EX-500-4

    ADAPTR 1/4 MALE HEX DR 1/2 SQ 4 OAL
    Male Hex Drive with 1/2" Male Square - Hex Extensions
    • Made in the USA - Quality and Availability
    • Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
    • Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
    • Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
    • Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
    • Made in the USA - Quality and Availability
    • Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
    • Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
    • Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
    • Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
    • Weight: 0.118 lb
    • Description: male hex to male sq
    • Hex Drive: 1/4 in
    • Magnetism: Non-Magnetic
    • Overall Length: 4.0 in, 102.0 mm
    • Set: No
    $58.65
    AX MB-13MM33.jpg

    3/8 Sq Drive Socket X 13mm Hex X 3.5 in OAL Mag

    AX MB-13MM33

    AX MB-13MM33

    SCKT 3/8 SQ DR 13MM HEX 88.9MM OAL MB
    3/8" Drive - Metric - Magnetic, 6 Point & Double Hex Long & Extra Long Length
    • Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
    • Made in the USA - Quality and Availability
    • High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
    • Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
    • Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
    • No ring groove.
    • Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
    • Made in the USA - Quality and Availability
    • High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
    • Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
    • Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
    • No ring groove.
    • Weight: 0.330 lb
    • Diameter Drive End (C): 20.6 mm
    • Diameter Nose End (B): 20.6 mm
    • Hex Opening: 13 mm
    • Magnetism: Magnetic
    • Opening Depth (D) (in): 8.7 mm
    • Opening Modifier: 6 Point Hex
    • Overall Length A: 88.9 mm
    • Set: No
    $73.53
    Picture of 1/2 Sq. Dr. Socket Head Bit 10mm

    1/2 Sq. Dr. Socket Head Bit 10mm

    AX SZ-5-7-10MM

    AX SZ-5-7-10MM

    BIT 1/2 FM SQ SRVDR 10MM 2-1/2" 64MM OAL
    1/2" Drive Metric Socket Head Adapters & Inserts
    • Made in the USA - Quality and Availability
    • Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
    • Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
    • Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
    • Made in the USA - Quality and Availability
    • Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
    • Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
    • Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
    • Weight: 0.263 lb
    • Bit Length (A): 7/8 in, 22 mm
    • Fastener Type: Socket Head
    • Hex Size: 10 mm
    • Overall Length: 2.5 in, 63.0 mm
    • Set: No
    $26.69
    Picture of U-Guard 3/8 Sq Dr Socket x 15mm Hex

    U-Guard 3/8 Sq Dr Socket x 15mm Hex

    AX UG-15MM13

    AX UG-15MM13

    U-Guard 3/8 Sq Dr Socket x 15mm Hex
    $81.77
    Picture of U-Guard Socket 1/2 Sq Drv x 15MM Hex

    U-Guard Socket 1/2 Sq Drv x 15MM Hex

    AX UG-15MM15

    AX UG-15MM15

    SCKT CVRD 1/2 SQ DR 15MM HEX 38.1MM OAL
    1/2" Drive Metric u-GUARD Non-Magnetic Covered Sockets
    • Weight: 0.185 lb
    • Drive End Sex: F
    • Drive End Type: Square
    • Drive Size: 1/2 in
    • Fastener End Sex: F
    • Fastener End Size: 15 mm
    • Fastener End Type: Hex
    • Magnetism: Non-Magnetic
    • Metal Socket Number: 15MM15
    • Opening Modifier: 6 Point Hex
    • Set: No
    $85.09
    Picture of SCKT CVRD 1/2 SQ DR 16MM HEX 38.1MM OAL, 12/Minimum

    SCKT CVRD 1/2 SQ DR 16MM HEX 38.1MM OAL, 12/Minimum

    AX UG-16MM15

    AX UG-16MM15

    SCKT CVRD 1/2 SQ DR 16MM HEX 38.1MM OAL, 12/Minimum
    $85.51
    Picture of U Guard Sckt 1/2 Sq Dr 17mm Hex

    U Guard Sckt 1/2 Sq Dr 17mm Hex

    AX UG-17MM15

    AX UG-17MM15

    U Guard Sckt 1/2 Sq Dr 17mm Hex
    $98.77
    Picture of Socket Retainer

    Socket Retainer

    IR RR10015S

    IR RR10015S

    1" Square Thu-Hole Socket Retainer

    Product Application and Uses:

    For use with Ingersoll Rand 2922P1 Air Impact Wrench.

    • Drive Size (in): 1
    • Drive Type: Square
    • Retainer Type: Friction Ring and Thru-hole
    • For Use With: 2922P1
    • For Use With: 2934B2
    • For Use With: 2934P2
    $15.00
    STR 809233.jpg

    Box Head BH-14mm, Head Only

    STR 809233

    STR 809233

    Box Head Interchangeable Heads for Torque Wrenches

    Model: BH 14MM
    Capacity: 119 Nm
    Dimensions Insert: 14 mm

    A: 48.26 mm
    B: 25.4 mm
    C: 10.16 mm
    D: 22.86 mm
    E: 20.32 mm

    Product Description

    • One piece, cast, proprietary steel selection
    • All of our heads fit on all of our wrenches
    • Our smallest head fits on our largest wrench
    • Our largest head fits on our smallest wrench
    • Fewer wrenches to buy, calibrate, repair, and manage
    • No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
    • Sturtevant Richmont interchangeable heads have two common centerlines
    • Typically for sizes 32 mm and below the common centerline is 365 mm
    • Sizes larger than 33 mm the common centerline extends to 984 mm
    $105.96
    Refine
    ×
    Manufacturer
    Manufacturers
    View all
    Information
    My account
    Customer service

    Payment options

    Copyright © 2026 AirPower. All rights reserved.