Bits and Sockets

IR SK34C86N

Combination Hex Metric and SAE Standard and Deep Socket Set for 3/8 and 1/2 Inch Drive Imapct Wrenches, 86-Piece

Features And Benefits:

• High Torque Applications: With impact grade toughness, this 3/8" and 1/2" 86-piece metric and SAE combo socket set is designed for high torque applications.
• Durability & Quality: Forged from Chromoly steel for strength, durability and quality. Manufactured for the harshest work environments.
• Easy Identification: Laser-etched and roll-stamped size labeling for easier identification even after hundreds of uses.
• Includes: All sockets from the following combo sets, SK3H8N, SK3H8LN, SK3M8N, SK3M8LN, SK4H13N, SK4H13LN, SK4M14N, & SK4M14LN

• Includes: 86 sockets and carrying case. Includes All sockets from the following combo sets, SK3H8N (3/8" Drive Hex Universal SAE Impact Socket Set, 8-Piece), SK3H8LN (3/8" Drive Hex Deep SAE Impact Socket Set, 8-Piece), SK3M8N (3/8" Drive Hex Metric Socket Set, 8-Piece), SK3M8LN (3/8" Drive Hex Metric Deep Impact Socket Set, 8-Piece), SK4H13N, (1/2" Drive Hex SAE Impact Socket Set, 13-Piece) SK4H13LN (1/2" Drive Hex SAE Deep Socket Set, 13-Piece), SK4M14N (1/2" Drive Hex Universal Metric Impact Socket Set, 14-Piece), & SK4M14LN (1/2" Drive Hex Metric Universal Impact Socket Set, 14-Piece)

• Drive Size (in): 1/2
• Drive Size (in): 3/8
• Drive Type: Square

• Number of Points: 6

• Socket Bit Type: Hex
• Socket Depth: Deep
• Socket Depth: Standard
• Socket Measurement Type: SAE
• Socket Measurement Type: Metric

• Special Features: Impact-grade toughness
• Special Features: Chrome-molybdenum steel

• Warranty: Lifetime Limited

• Bundle Kit: SK3H8N:1
• Bundle Kit: SK3H8LN:1
• Bundle Kit: SK3M8N:1
• Bundle Kit: SK3M8LN:1
• Bundle Kit: SK4H13N:1
• Bundle Kit: SK4H13LN:1
• Bundle Kit: SK4M14N:1
• Bundle Kit: SK4M14LN:1

STR 819071

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 819725

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 819727

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 819766

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

SX SDM2716D

Z2905

Z2910

Z3540

Z4000

AX 10MM13

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.093 lb
• Diameter Drive End (C): 19.1 mm
• Diameter Nose End (B): 16.8 mm

• Hex Opening: 10 mm
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 6.4 mm
• Opening Modifier: 6 Point Hex

• Overall Length A: 31.7 mm
• Set: No

AX 480-TX-50X

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

• Weight: 0.028 lb

• Drive: Hex Insert
• Drive Size: T-50
• Fastener Type: Torx

• Measurement Across Lobes: .346 in

• Overall Length: 1.25 in, 32.0 mm
• Set: No
• SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

AX AM-06-3

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Weight: 0.040 lb

• Drive: Hex Power Drive
• Fastener Type: Socket Head

• Hex Size: 3/16 in

• Overall Length: 3.0 in, 76.0 mm
• Set: No

AX EX-250-8

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

• Weight: 0.161 lb
• Description: male hex to male sq

• Hex Drive: 1/4 in

• Magnetism: Non-Magnetic

• Overall Length: 8.0 in, 203.0 mm
• Set: No

AX EX-370-B

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

• Weight: 0.037 lb
• Description: male hex to male sq

• Hex Drive: 1/4 in

• Magnetism: Non-Magnetic

• Overall Length: 1.625 in, 41.0 mm
• Set: No

AX M-10MM15

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.170 lb
• Diameter Drive End (C): 23.8 mm
• Diameter Nose End (B): 16.7 mm

• Hex Opening: 10 mm
• Magnetism: Magnetic

• Opening Depth (D) (in): 6.4 mm
• Opening Modifier: 6 Point Hex

• Overall Length A: 38.1 mm
• Set: No

AX SF-3012

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.026 lb
• Diameter Drive End (C): 3/4 in
• Diameter Nose End (B): 19/32 in

• Hex Opening: 3/8 in
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 3/16 in
• Opening Modifier: Surface Drive

• Overall Length A: 7/8 in
• Set: No

AX SZ-7-5MM

AX UG-10MM23

• Weight: 0.188 lb

• Drive End Sex: F
• Drive End Type: Square
• Drive Size: 3/8 in
• Fastener End Sex: F
• Fastener End Size: 10 mm
• Fastener End Type: Hex

• Magnetism: Non-Magnetic

• Metal Socket Number: 10MM23
• Opening Modifier: 6 Point Hex

• Set: No

HN 17

S 5409-04

STR 809232

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809307

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 819009

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 819945

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm