Bits and Sockets

Z4001

7/8 X 3-1/4 X 18 DR.STEEL

AX 49-TX-20-W

BIT 1/4 HEX PWR DR T-20 TX 1-15/16" 49MM
1/4" Hex Power Drive - Torxalign - Torx Bits

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks
• Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks
• Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

• Weight: 0.018 lb

• Drive: Hex Power Drive
• Drive Size: T-20
• Fastener Type: Torx

• Measurement Across Lobes: .151 in

• Overall Length: 1.93 in, 49.0 mm
• Set: No
• SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

AX UG-13MM15

SCKT CVRD 1/2 SQ DR 13MM HEX 38.1MM OAL
1/2" Drive Metric u-GUARD Non-Magnetic Covered Sockets

• Weight: 0.174 lb

• Drive End Sex: F
• Drive End Type: Square
• Drive Size: 1/2 in
• Fastener End Sex: F
• Fastener End Size: 13 mm
• Fastener End Type: Hex

• Magnetism: Non-Magnetic

• Metal Socket Number: 13MM15
• Opening Modifier: 6 Point Hex

• Set: No

AX 10MM13

SCKT 3/8 SQ DR 10MM HEX 1.250" OAL
3/8" Drive - Metric - 6 Point & 12 Point, Short and Standard Length

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.093 lb
• Diameter Drive End (C): 19.1 mm
• Diameter Nose End (B): 16.8 mm

• Hex Opening: 10 mm
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 6.4 mm
• Opening Modifier: 6 Point Hex

• Overall Length A: 31.7 mm
• Set: No

AX AM-4MM

BIT 1/4 HEX PWR DR 4MM HEX 1-15/16" 49MM
1/4" Hex Power Drive - Metric - Socket Head Bits

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chuck
• Test

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chuck
• Test

• Weight: 0.021 lb

• Drive: Hex Power Drive
• Fastener Type: Socket Head

• Hex Size: 4 mm

• Overall Length: 6.0 in, 152.0 mm
• Set: No

AX EX-255-6

EXT 1/4 SQ DR 1/4 SQ 6 OAL
1/4" Drive - 7/8" to 14" (22mm to 356mm) Length

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

• Weight: 0.136 lb
• Description: Female sq. to Male sq.

• Male Square Drive (in): 1/4 in

• Overall Length: 6.0 in, 152.0 mm
• Set: No

STR 819009

Open End Interchangeable Heads for Torque Wrenches

Model	:		OE 13/16
Capacity	:		1250 lbf in
Dimensions Insert	:		13/16 in

A	:		2.0 in
B	:		1.8 in
C	:		0.5 in
D	:		1.0 in
E	:		0.8 in

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 819725

Open End Interchangeable Heads for Torque Wrenches

Model	:		OE 1 3/8
Capacity	:		4800 lbf in
Dimensions Insert	:		1-3/8 in

A	:		4-39/64 in
B	:		2-15/16 in
C	:		5/8 in
D	:		1-1/2 in
E	:		1 in

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 819766

Open End Interchangeable Heads for Torque Wrenches

Model	:		OE-36 mm
Capacity	:		350
Dimensions Insert	:		36

A	:		117.48 mm
B	:		74.61 mm
C	:		15.88 mm
D	:		38.1 mm
E	:		25.4 mm

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

Z3510

9 X 1 R/O CHSL

AX AMBQ2A-25

Apex Ind. 2-1/4in QR Bit Holder, 1/4in, 25 Minimum

AX MDA-14

NUTSET 1/4 MALE HEXDR 7/16 HEX 2 OAL MAG
1/4" Drive 6 Point Power Drive SAE Hex Nutsetters for Sheet Metal Screws

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Weight: 0.075 lb
• Description: Magnetic

• Magnetism: Magnetic

• Overall Length: 2.0 in
• Set: No
• Size: 7/16 in

AX UG-19MM15

U-Guard 1/2 Sq Dr Sckt 19mm Hex

AX UG-855

BIT HLDR CVRD 1/2 SQ DR 5/16 HEX 1-3/4

HN 22239E

3/8 Plug x 1/4 NPT Male

AX EX-374-B

EXT 3/8 SQ DR 3/8 SQ 1-3/8 OAL BALL LOCK
3/8" Drive - 1 1/4" to 18" (32mm to 457mm) Length

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

• Weight: 0.081 lb
• Description: Female sq. to Male sq.

• Male Square Drive (in): 3/8 in

• Overall Length: 1.375 in, 34.0 mm
• Set: No

AX EX-377-B-3

ADAP 1/2" SQ DR 3/8" SQ 3" OAL BALL LOCK
1/2" Drive 1/4" to 5/8" Male Square

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

• Weight: 0.011 lb
• Description: Female sq. to Male sq.

• Female Square (in): 1/2 in

• Male Square Drive (in): 3/8 in

• Overall Length: 3.0 in, 76.0 mm
• Set: No

AX EX-502-3

ADAPTR 5/8 MALE HEX DR 1/2 SQ 3 OAL
Male Hex Drive with 1/2" Male Square - Hex Extensions

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

• Weight: 0.262 lb
• Description: male hex to male sq

• Hex Drive: 5/8 in

• Magnetism: Non-Magnetic

• Overall Length: 3.0 in, 76.0 mm
• Set: No

AX EX-504-B

EXT 1/2 SQ DR 1/2 SQ 1-23/32" OAL BALL
1/2" Drive 1 23/32" to 18" (44mm to 457mm) Length

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

• Weight: 0.189 lb
• Description: Female sq. to Male sq.

• Male Square Drive (in): 1/2 in

• Overall Length: 1.71 in, 44.0 mm
• Set: No

AX M-490-8

MAG BIT HLDR 1/4 HEX DR 1/4 HEX 8 OAL
1/4" Hex Drive for 1/4" Hex Inserts - Bit Holders

• 1/4" Hex Drive for 1/4" Hex Inserts
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• 1/4" Hex Drive for 1/4" Hex Inserts
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.193 lb
• Description: Magnetic

• Drive: Hex Drive
• Drive Size: 1/4 in

• Magnetism: Magnetic

• Overall Length: 8.0 in, 203.0 mm
• Set: No

IR SK34C86N

Combination Hex Metric and SAE Standard and Deep Socket Set for 3/8 and 1/2 Inch Drive Imapct Wrenches, 86-Piece

Features And Benefits

• High Torque Applications: With impact grade toughness, this 3/8" and 1/2" 86-piece metric and SAE combo socket set is designed for high torque applications.
• Durability & Quality: Forged from Chromoly steel for strength, durability and quality. Manufactured for the harshest work environments.
• Easy Identification: Laser-etched and roll-stamped size labeling for easier identification even after hundreds of uses.
• Includes: All sockets from the following combo sets; SK3H8N, SK3H8LN, SK3M8N, SK3M8LN, SK4H13N, SK4H13LN, SK4M14N, & SK4M14LN

Includes: 86 sockets and carrying case. Includes All sockets from the following combo sets; SK3H8N (3/8" Drive Hex Universal SAE Impact Socket Set, 8-Piece), SK3H8LN (3/8" Drive Hex Deep SAE Impact Socket Set, 8-Piece), SK3M8N (3/8" Drive Hex Metric Socket Set, 8-Piece), SK3M8LN (3/8" Drive Hex Metric Deep Impact Socket Set, 8-Piece), SK4H13N, (1/2" Drive Hex SAE Impact Socket Set, 13-Piece) SK4H13LN (1/2" Drive Hex SAE Deep Socket Set, 13-Piece), SK4M14N (1/2" Drive Hex Universal Metric Impact Socket Set, 14-Piece), & SK4M14LN (1/2" Drive Hex Metric Universal Impact Socket Set, 14-Piece)
Drive Size (in): 1/2
Drive Size (in): 3/8
Drive Type: Square
Number of Points: 6
Socket Bit Type: Hex
Socket Depth: Deep
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Measurement Type: Metric
Special Features: Impact-grade toughness
Special Features: Chrome-molybdenum steel
Warranty: Lifetime Limited

STR 809307

Box Head Interchangeable Heads for Torque Wrenches

Model	:		BH 21MM
Capacity	:		237 Nm
Dimensions Insert	:		21 mm

A	:		53.34 mm
B	:		33.02 mm
C	:		15.24 mm
D	:		25.4 mm
E	:		22.86 mm

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 819071

Box Head Interchangeable Heads for Torque Wrenches

Model	:		BH 15/16
Capacity	:		2700 lbf in
Dimensions Insert	:		15/16 in

A	:		2.2 in
B	:		1.5 in
C	:		0.7 in
D	:		1.3 in
E	:		0.9 in

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 819727

Open End Interchangeable Heads for Torque Wrenches

Model	:		OE 1 1/2
Capacity	:		4800 lbf in
Dimensions Insert	:		1-1/2 in

A	:		4-19/32 in
B	:		2-15/16 in
C	:		5/8 in
D	:		1-1/2 in
E	:		1 in

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 819951

Open End Interchangeable Heads for Torque Wrenches

Model	:		OE-22 mm
Capacity	:		169
Dimensions Insert	:		22

A	:		50.8 mm
B	:		53.34 mm
C	:		12.70 mm
D	:		33.02 mm
E	:		20.32 mm

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm