Bits and Sockets

AX EX-370-10

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

• Weight: 0.218 lb
• Description: male hex to male sq

• Hex Drive: 1/4 in

• Magnetism: Non-Magnetic

• Overall Length: 10.0 in, 254.0 mm
• Set: No

STR 819011

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 819007

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

Z2955

AX 592X

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.009 lb

• Drive: screw shank drive
• Fastener Type: Phillips

• Overall Length: 1.18 in, 30.0 mm
• Point Size: 2
• Set: No

AX M-1110

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Parts have a harder heat treat MX-1108-E has no lead-in chamfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Parts have a harder heat treat MX-1108-E has no lead-in chamfer

• Weight: 0.038 lb
• Diameter Drive End (C): 1/2 in
• Diameter Nose End (B): 1/2 in

• Hex Opening: 5/16 in
• Magnetism: Magnetic

• Opening Depth (D) (in): 3/16 in
• Opening Modifier: 6 Point Hex

• Overall Length A: 1 in
• Set: No

AX M6N-0814-6

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.163 lb

• Magnetism: Magnetic

• Overall Length: 6.0 in
• Set: No
• Size: 7/16 in

AX QR-108

• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.140 lb

• Hex Open. (A): 1/4 in
• Magnetism: Non-Magnetic

• Opening Depth (F): 61/64 in, 24 mm

• Set: No
• Sleeve Diameter (E): 3/4 in, 19 mm

STR 809507

Ratcheting Square Drive Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 819012

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

AX 492X

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Weight: 0.023 lb

• Drive: Hex Power Drive
• Fastener Type: Phillips

• Overall Length: 1.93 in, 49.0 mm
• Point Size: 2
• Set: No

AX S308450

AX 440-2-ACR2X

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque
• Part number suffix -R, For removal. Part number suffix -D, For driving. No part number suffix - For both removal and driving.

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque
• Part number suffix -R, For removal. Part number suffix -D, For driving. No part number suffix - For both removal and driving.

• Weight: 0.012 lb

• Drive: Hex Insert
• Fastener Type: Phillips

• Overall Length: 1.0 in, 25.0 mm
• Point Size: 2
• Set: No
• SKU Group Note: ACR is a trademark of the Phillips Screw Co.

STR 819013

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

Z2900

AX UG-10MM13

• Weight: 0.105 lb

• Drive End Sex: F
• Drive End Type: Square
• Drive Size: 3/8 in
• Fastener End Sex: F
• Fastener End Size: 10 mm
• Fastener End Type: Hex

• Magnetism: Non-Magnetic

• Metal Socket Number: 10MM13
• Opening Modifier: 6 Point Hex

• Set: No

Z2970

Z3535

AX 10MM15

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.161 lb
• Diameter Drive End (C): 23.8 mm
• Diameter Nose End (B): 16.7 mm

• Hex Opening: 10 mm
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 6.4 mm
• Opening Modifier: 6 Point Hex

• Overall Length A: 38.1 mm
• Set: No

AX EX-370-4

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

• Weight: 0.090 lb
• Description: male hex to male sq

• Hex Drive: 1/4 in

• Magnetism: Non-Magnetic

• Overall Length: 4.0 in, 102.0 mm
• Set: No

AX EX-500-B-2

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

• Weight: 0.072 lb
• Description: male hex to male sq

• Hex Drive: 1/4 in

• Magnetism: Non-Magnetic

• Overall Length: 2.0 in, 51.0 mm
• Set: No

AX EX-503-B

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

• Weight: 0.116 lb
• Description: Female sq. to Male sq.

• Female Square (in): 3/8 in

• Male Square Drive (in): 1/2 in

• Overall Length: 1.5 in, 38.0 mm
• Set: No

AX MB-13MM33

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• No ring groove.

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• No ring groove.

• Weight: 0.330 lb
• Diameter Drive End (C): 20.6 mm
• Diameter Nose End (B): 20.6 mm

• Hex Opening: 13 mm
• Magnetism: Magnetic

• Opening Depth (D) (in): 8.7 mm
• Opening Modifier: 6 Point Hex

• Overall Length A: 88.9 mm
• Set: No

STR 819006

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

Z3305