Spray Guns - Manual

View as Grid List
Sort by
Display items per page
STELLAIR GUN, CONV (.086)

STELLAIR GUN, CONV (.086)

GG 2004149

GG 2004149

STELLAIR GUN, CONV (.086)

Stellair Air Spray Gun, Conventional, 0.086 in (2.2 mm), General Industry, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Conventional is the traditional air spray method, producing Class A, automotive finish quality.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Swivel and hose move with you at any angle, preventing tripping and injury.
Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$473.00
STELLAIR GUN, HVLP (.070)

STELLAIR GUN, HVLP (.070)

GG 2004153

GG 2004153

STELLAIR GUN, HVLP (.070)

Stellair Air Spray Gun, HVLP, 0.070 in (1.8 mm), General Industry, PEEK Tip
Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$630.00
STELLAIR GUN, HVLP (.070) SST TIP

STELLAIR GUN, HVLP (.070) SST TIP

GG 2004160

GG 2004160

STELLAIR GUN, HVLP (.070) SST TIP

Stellair Air Spray Gun, HVLP, 0.070 in (1.8 mm), General Industry, SST Tip
Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Stainless steel (SST) needle tip withstands active use, increasing uptime between service intervals.
Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter’s hand.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$683.00
STELLAIR GUN, COMP (.055) SST TIP

STELLAIR GUN, COMP (.055) SST TIP

GG 2004161

GG 2004161

STELLAIR GUN, COMP (.055) SST TIP

Stellair Air Spray Gun, Compliant, 0.055 in (1.4 mm), General Industry, SST Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Compliant air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency.
General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
Stainless steel (SST) needle tip withstands active use, increasing uptime between service intervals.
Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$683.00
STELLAIR GUN, CONV (.042) SST TIP, AUTOMOVTIVE

STELLAIR GUN, CONV (.042) SST TIP, AUTOMOVTIVE

GG 2004163

GG 2004163

STELLAIR GUN, CONV (.042) SST TIP, AUTOMOVTIVE

Stellair Air Spray Gun, Conventional, 0.042 in (1.1 mm), Automotive, SST Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
Conventional is the traditional air spray method, producing Class A, automotive finish quality.
Automotive air cap produces excellent atomization for Class A finishes when spraying base coats, clear coats and primers.
Stainless steel (SST) needle tip withstands active use, increasing uptime between service intervals.
Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$525.00
STELLAIR GUN, HVLP (.042), TRIM

STELLAIR GUN, HVLP (.042), TRIM

GG 2004175

GG 2004175

STELLAIR GUN, HVLP (.042), TRIM

Stellair Air Spray Gun, HVLP, 0.042 in (1.1 mm), Trim, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.
Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.
High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
Trim air cap produces a well-defined edge with minimal overspray, essential for selective applications like edges, trim, and dielectrics.
Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter’s hand.
One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
$630.00
ROADLAZER GUN, SPRAY, PAINT

ROADLAZER GUN, SPRAY, PAINT

GG 238377

GG 238377

ROADLAZER GUN, SPRAY, PAINT

Single Acting Paint Spray Gun for RoadLazer RoadPak For use with RoadLazer RoadPak line striping systems
$1,370.00
FLEX GUN, W/RAC X 517 LATEX

FLEX GUN, W/RAC X 517 LATEX

GG 246468

GG 246468

FLEX GUN, W/RAC X 517 LATEX

Flex Plus Airless Spray Gun, 2 Finger Trigger, RAC X The Flex Plus Airless Spray Gun is the ideal gun for heavy coatings and joint compounds. Includes a 2-finger trigger and a RAC X 517 SwitchTip and Guard. Ergonomic Handle
  • Reduces fatigue and increases comfort for all-day spraying
No Adjustment Needle
  • Provides quick and easy repairs
Patented Needle Design
  • Increases life
Large Fluid Path
  • Reduces clogging
$395.00
AIRPRO GUN, PRESSURE, CONV Obsolete

AIRPRO GUN, PRESSURE, CONV Obsolete

GG 24D472

GG 24D472

AIRPRO GUN, PRESSURE, CONV

Graco 24D472 AirPro Air Spray Pressure Feed Gun, Conventional, 0.042 inch (1.1 mm) Nozzle, for Automotive Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

  • Even material distribution through the spray pattern for optimum coverage
  • Improved transfer efficiency through reduced air consumption
  • Enhanced atomization through material-specific aircaps
  • Ultra-light trigger pull reduces operator muscle stress
  • Ergonomic gun handle provides a comfortable grip
  • Rounded control knobs for operator comfort
  • Optimize spray performance with our cutting edge aircap and nozzle design
  • Choose from a wide range of gun models to meet the needs of your specific application


  • Model: AirPro
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Application: Automotive
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: Adhesives, Ceramics, Fast-Set, High Solids, Sealants, Solvent borne, Stains, UV Coating, Waterborne
  • Feed Type: Pressure Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.11
  • Fluid Orifice Size (in): 0.042
  • Fluid Orifice Size (mm): 1.1
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Conventional Gun
  • Gun Weight (g): 410
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
Call for pricing
FINEX GUN, GRACO

FINEX GUN, GRACO

GG 24J600

GG 24J600

FINEX GUN, GRACO

Graco 24J600 Finex Air Spray Gravity Feed Side Cup Gun, HVLP, 0.055 in (1.4 mm) needle/ nozzle size

The Finex Side Cup Gun has a cup that swivels – ideal for end users spraying in tight spaces. Available in either HVLP or conventional technologies.

Application: Easily spray small spaces and corners with the Finex gravity feed gun with swivel cup
  • Aluminum cup is included with the gun
  • Cup swivels for spraying in small spaces
  • Light trigger pull for operator comfort
  • Integrated air inlet adjustment (cheater) valve


  • Model: Finex
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Body Material: Metal
  • Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Side-Cup Gravity Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.14
  • Fluid Orifice Size (in): 0.055
  • Fluid Orifice Size (mm): 1.4
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: HVLP Gun
  • Gun Weight (kg): 0.54
  • Gun Weight (lb): 1.2
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 7
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 7
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
$281.50
Gun, P2, Automatic

Gun, P2, Automatic

GG 24X636

GG 24X636

P2 EXTREME GUN,AUTOMATIC

Graco 24X636 Automatic Probler P2 Extreme Dispense Gun

The Probler P2 Extreme Gun is lightweight and easy to mount to automation platforms - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of mix chamber movement. The Probler P2 Extreme reduces maintenance, increases spraying uptime and is easy to use in high production environments.

Application: For high output spray polyurethane foam and polyurea applications

  • The P2 Extreme elite:

    • Extreme wear stainless steal side blox and mix chamber housings
    • Alternate side block hose routings
    • Allows filters to be easily removed

  • Easy daily maintenance

  • Easy-to-replace mix chamber insert

    Anti-crossover design virtually eliminates possibility of material entering the air piston


  • Application: Foam, Polyurea
  • Compatible Material: Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC
$9,190.00
RS GUN, ASM, INT MIX, GEL

RS GUN, ASM, INT MIX, GEL

GG 258853

GG 258853

RS GUN, ASM, INT MIX, GEL

RS Internal Mix Gel Coat Gun with Tip

Innovations engineered into the Graco RS Gel Coat Gun are sure to make a difference in your production uptime. It's lightweight, ergonomic, designed for tool-less operation and fast, easy maintenance as well. It’s available in internal and external mixing gelcoat spray guns. Discover how the Graco RS Resin Spray Gun’s revolutionary design and industry-first features can help boost your company’s bottom line.

Makes production easier

  • Simple, quick start up and shut down
  • Quick tool-less blade change
  • No need to adjust needle settings after maintenance

Improves product quality

  • Lightweight cutter gives better chopping control
  • Easy one-hand cutter speed control
  • Superior spray pattern

Improves operator comfort for increased job satisfaction

  • Lighter, ergonomic gun reduces fatigue
  • Lets you quickly adjust anvil tension to correct cut variations due to anvil and blade wear
  • No problems soaking the RS Gun in solvents overnight

Saves material costs

  • Air Assist Containment (AAC®) standard on all RS Guns
  • Lower pressure reduces overspray
$3,030.00
PERFORMAA GUN, AA, 5000, LV, SWIVEL

PERFORMAA GUN, AA, 5000, LV, SWIVEL

GG 26B516

GG 26B516

PERFORMAA GUN, AA, 5000, LV, SWIVEL

Graco 26B516 PerformAA 5000 Air Assist Gun with Low Viscosity air cap and fluid swivel

Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.

  • High quality 5000 psi air assist spray gun
  • Low viscosity air cap for even dispersion of light materials
  • Includes a low profile fluid swivel
  • Clicking fan pattern adjustment knob for accurate adjustment


  • Model: PerformAA 50
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Gender: Male
  • Air Inlet Thread Type: NPSM
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: Stains, Sealer, Solvent borne, Solvent borne Paints, Toner
  • Compatible Spray Tip: AXM, AXF
  • Feed Type: Pressure Feed
  • Fluid Adjustment Knob: Clicking
  • Fluid Inlet Size (cm): 0.635
  • Fluid Inlet Size (in): 1/4
  • Fluid Inlet Size (mm): 6.35
  • Fluid Inlet Thread Gender: Male
  • Fluid Inlet Thread Type: NPSM
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Air-Assisted Gun
  • Gun Weight (g): 453
  • Gun Weight (kg): 0.45
  • Gun Weight (lb): 1
  • Gun Weight (oz): 16
  • Gun Weight with Tip and Guard (g): 490
  • Gun Weight with Tip and Guard (oz): 17.4
  • Gun Weight without Tip and Guard (g): 460
  • Gun Weight without Tip and Guard (oz): 16.2
  • Includes: Carbide Seat/Ball, Tip Guard, Tip of Choice, Tool Kit
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 345
  • Maximum Fluid Pressure (kPa): 34500
  • Maximum Fluid Pressure (MPa): 34.5
  • Maximum Fluid Pressure (psi): 5000
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 110
  • Maximum Fluid Pressure (bar): 345
  • Maximum Fluid Pressure (kPa): 34500
  • Maximum Fluid Pressure (MPa): 34.5
  • Maximum Fluid Pressure (psi): 5000
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 110
  • Overall Height (cm): 20.8
  • Overall Height (in): 8.2
  • Overall Height (mm): 208
  • Overall Length (cm): 17.25
  • Overall Length (in): 6.8
  • Overall Length (mm): 173
  • Product Type: Spray Gun
$1,365.00
AIRPRO GUN, PRESSURE, HVLP, .020 Obsolete

AIRPRO GUN, PRESSURE, HVLP, .020 Obsolete

GG 288935

GG 288935

AIRPRO GUN, PRESSURE, HVLP, .020

Graco 288935 AirPro Air Spray Pressure Feed Gun, HVLP, 0.020 inch (0.5 mm) Nozzle, for General Metal Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

  • Even material distribution through the spray pattern for optimum coverage
  • Improved transfer efficiency through reduced air consumption
  • Enhanced atomization through material-specific aircaps
  • Ultra-light trigger pull reduces operator muscle stress
  • Ergonomic gun handle provides a comfortable grip
  • Rounded control knobs for operator comfort
  • Optimize spray performance with our cutting edge aircap and nozzle design
  • Choose from a wide range of gun models to meet the needs of your specific application


  • Model: AirPro
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Application: Metal
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Component Type: Two Component
  • Feed Type: Pressure Feed
  • Fluid Orifice Size (cm): 0.051
  • Fluid Orifice Size (in): 0.020
  • Fluid Orifice Size (mm): 0.5
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: HVLP Gun
  • Gun Weight (g): 410
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Minimum Flow Rate @ PSI (oz/min): 4
  • Product Type: Spray Gun
Call for pricing
AIRPRO GUN, PRESSURE, COMPLIANT, .020 Obsolete

AIRPRO GUN, PRESSURE, COMPLIANT, .020 Obsolete

GG 288942

GG 288942

AIRPRO GUN, PRESSURE, COMPLIANT, .020

Graco 288942 AirPro Air Spray Pressure Feed Gun, Compliant, 0.020 inch (0.5 mm) Nozzle, for General Metal Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

  • Even material distribution through the spray pattern for optimum coverage
  • Improved transfer efficiency through reduced air consumption
  • Enhanced atomization through material-specific aircaps
  • Ultra-light trigger pull reduces operator muscle stress
  • Ergonomic gun handle provides a comfortable grip
  • Rounded control knobs for operator comfort
  • Optimize spray performance with our cutting edge aircap and nozzle design
  • Choose from a wide range of gun models to meet the needs of your specific application


  • Model: AirPro
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Application: Metal
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Pressure Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.05
  • Fluid Orifice Size (in): 0.020
  • Fluid Orifice Size (mm): 0.5
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Compliant Gun
  • Gun Weight (g): 410
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Minimum Flow Rate @ PSI (oz/min): 4
  • Product Type: Spray Gun
Call for pricing
AIRPRO GUN, PRESSURE, COMPLIANT, .030 Obsolete

AIRPRO GUN, PRESSURE, COMPLIANT, .030 Obsolete

GG 288943

GG 288943

AIRPRO GUN, PRESSURE, COMPLIANT, .030

Graco 288943 AirPro Air Spray Pressure Feed Gun, Compliant, 0.030 inch (0.8 mm) Nozzle, for General Metal Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

  • Even material distribution through the spray pattern for optimum coverage
  • Improved transfer efficiency through reduced air consumption
  • Enhanced atomization through material-specific aircaps
  • Ultra-light trigger pull reduces operator muscle stress
  • Ergonomic gun handle provides a comfortable grip
  • Rounded control knobs for operator comfort
  • Optimize spray performance with our cutting edge aircap and nozzle design
  • Choose from a wide range of gun models to meet the needs of your specific application


  • Model: AirPro
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Application: Metal
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Pressure Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.08
  • Fluid Orifice Size (in): 0.030
  • Fluid Orifice Size (mm): 0.8
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Compliant Gun
  • Gun Weight (g): 410
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
Call for pricing
AIRPRO GUN, SST TIP, AIR SPRAY, .042 Obsolete

AIRPRO GUN, SST TIP, AIR SPRAY, .042 Obsolete

GG 288949

GG 288949

AIRPRO GUN, SST TIP, AIR SPRAY, .042

Graco 288949 AirPro Air Spray Pressure Feed Gun, Conventional, 0.042 inch (1.1 mm) Nozzle, SST Tip, for General Metal Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

  • Even material distribution through the spray pattern for optimum coverage
  • Improved transfer efficiency through reduced air consumption
  • Enhanced atomization through material-specific aircaps
  • Ultra-light trigger pull reduces operator muscle stress
  • Ergonomic gun handle provides a comfortable grip
  • Rounded control knobs for operator comfort
  • Optimize spray performance with our cutting edge aircap and nozzle design
  • Choose from a wide range of gun models to meet the needs of your specific application


  • Model: AirPro
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Application: Metal
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Pressure Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.11
  • Fluid Orifice Size (in): 0.042
  • Fluid Orifice Size (mm): 1.1
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Conventional Gun
  • Gun Weight (g): 410
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
Call for pricing
AIRPRO GUN, ASSY, COMP, GRAVITY W/CUP Obsolete

AIRPRO GUN, ASSY, COMP, GRAVITY W/CUP Obsolete

GG 289018

GG 289018

AIRPRO GUN, ASSY, COMP, GRAVITY W/CUP

Graco 289018 AirPro Air Spray Gravity Feed Gun, Compliant, 0.070 inch (1.8 mm) Nozzle, Plastic Gravity Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

  • Even material distribution through the spray pattern for optimum coverage
  • Improved transfer efficiency through reduced air consumption
  • Enhanced atomization through material-specific aircaps
  • Ultra-light trigger pull reduces operator muscle stress
  • Ergonomic gun handle provides a comfortable grip
  • Rounded control knobs for operator comfort
  • Optimize spray performance with our cutting edge aircap and nozzle design
  • Choose from a wide range of gun models to meet the needs of your specific application


  • Model: AirPro
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Application: Specialty
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Gravity Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.18
  • Fluid Orifice Size (in): 0.070
  • Fluid Orifice Size (mm): 1.8
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Compliant Gun
  • Gun Weight (g): 410
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
Call for pricing
AIRPRO GUN, ASSY, COMP, GRAV, PPS, .070 Obsolete

AIRPRO GUN, ASSY, COMP, GRAV, PPS, .070 Obsolete

GG 289027

GG 289027

AIRPRO GUN, ASSY, COMP, GRAV, PPS, .070

Graco 289027 AirPro Air Spray Gravity Feed Gun, Compliant, 0.070 inch (1.8 mm) Nozzle, 3M PPS Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

  • Even material distribution through the spray pattern for optimum coverage
  • Improved transfer efficiency through reduced air consumption
  • Enhanced atomization through material-specific aircaps
  • Ultra-light trigger pull reduces operator muscle stress
  • Ergonomic gun handle provides a comfortable grip
  • Rounded control knobs for operator comfort
  • Optimize spray performance with our cutting edge aircap and nozzle design
  • Choose from a wide range of gun models to meet the needs of your specific application


  • Model: AirPro
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Application: Specialty
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Gravity Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.18
  • Fluid Orifice Size (in): 0.070
  • Fluid Orifice Size (mm): 1.8
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Compliant Gun
  • Gun Weight (g): 410
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
Call for pricing
AIRPRO GUN, SIPHON, CONV, .070 Obsolete

AIRPRO GUN, SIPHON, CONV, .070 Obsolete

GG 289029

GG 289029

AIRPRO GUN, SIPHON, CONV, .070

Graco 289029 AirPro Air Spray Siphon Feed Gun, Conventional, 0.070 inch (1.8 mm) Nozzle, Metal Siphon Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

  • Even material distribution through the spray pattern for optimum coverage
  • Improved transfer efficiency through reduced air consumption
  • Enhanced atomization through material-specific aircaps
  • Ultra-light trigger pull reduces operator muscle stress
  • Ergonomic gun handle provides a comfortable grip
  • Rounded control knobs for operator comfort
  • Optimize spray performance with our cutting edge aircap and nozzle design
  • Choose from a wide range of gun models to meet the needs of your specific application


  • Model: AirPro
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Application: Specialty
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Siphon Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.18
  • Fluid Orifice Size (in): 0.070
  • Fluid Orifice Size (mm): 1.8
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Conventional Gun
  • Gun Weight (g): 410
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
$639.00
AIRPRO GUN, SIPHON, HVLP, .070 Obsolete

AIRPRO GUN, SIPHON, HVLP, .070 Obsolete

GG 289031

GG 289031

AIRPRO GUN, SIPHON, HVLP, .070

Graco 289031 AirPro Air Spray Siphon Feed Gun, HVLP, 0.070 inch (1.8 mm) Nozzle, Metal Siphon Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

  • Even material distribution through the spray pattern for optimum coverage
  • Improved transfer efficiency through reduced air consumption
  • Enhanced atomization through material-specific aircaps
  • Ultra-light trigger pull reduces operator muscle stress
  • Ergonomic gun handle provides a comfortable grip
  • Rounded control knobs for operator comfort
  • Optimize spray performance with our cutting edge aircap and nozzle design
  • Choose from a wide range of gun models to meet the needs of your specific application


  • Model: AirPro
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Application: Specialty
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Siphon Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.18
  • Fluid Orifice Size (in): 0.070
  • Fluid Orifice Size (mm): 1.8
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: HVLP Gun
  • Gun Weight (g): 410
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 21
  • Maximum Fluid Pressure (kPa): 2100
  • Maximum Fluid Pressure (MPa): 2.1
  • Maximum Fluid Pressure (psi): 300
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
$966.00
FINEX GUN, GRACO, 2, CONV., 1.5

FINEX GUN, GRACO, 2, CONV., 1.5

GG 289245

GG 289245

FINEX GUN, GRACO, 2, CONV., 1.5

Graco 289245 Finex Air Spray Gravity Feed Gun, conventional, 0.059 in (1.5 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

  • Aircaps optimized for high quality spray performance
  • Lightweight, ergonomic gun
  • Lightest trigger pull in its category


  • Model: Finex
  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPSM
  • Applicator Type: Manual
  • Bleed Type: Non-Bleeder
  • Body Material: Metal
  • Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
  • Feed Type: Standard Gravity Feed
  • Fluid Inlet Size (cm): 0.9525
  • Fluid Inlet Size (in): 3/8
  • Fluid Inlet Size (mm): 9.525
  • Fluid Inlet Thread Type: NPSM
  • Fluid Orifice Size (cm): 0.15
  • Fluid Orifice Size (in): 0.059
  • Fluid Orifice Size (mm): 1.5
  • Gun Activation: Manual
  • Gun Included: 1
  • Gun Type: Conventional Gun
  • Gun Weight (kg): 0.54
  • Gun Weight (lb): 1.2
  • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 700
  • Maximum Air Inlet Pressure (MPa): 0.7
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Air Pressure (bar): 7
  • Maximum Air Pressure (kPa): 700
  • Maximum Air Pressure (MPa): 0.7
  • Maximum Air Pressure (psi): 100
  • Maximum Fluid Pressure (bar): 7
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Maximum Fluid Pressure (bar): 7
  • Maximum Fluid Pressure (kPa): 700
  • Maximum Fluid Pressure (MPa): 0.7
  • Maximum Fluid Pressure (psi): 100
  • Maximum Fluid Temperature (°C): 43
  • Maximum Fluid Temperature (°F): 109
  • Product Type: Spray Gun
$232.00
FUSION CS GUN, RD0202

FUSION CS GUN, RD0202

GG CS02RD

GG CS02RD

FUSION CS GUN, RD0202

Fusion CS Gun, Round Spray Pattern, 0.052 in (1.3 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

For high output spray polyurethane foam and polyurea applications. New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge Removes foam and keeps mix chamber clear Saves almost an hour of maintenance time each spray day First-ever liquid purge – reduces purge air by 75% and minimizes foam blowback Easy-to-insert cartridge fits into ergonomic handle

Variable flow - an industry first

  • First plural-component gun with variable flow
  • Switch from large to small spray patterns in seconds
  • Gives you more maneuverability to spray in small, tight areas
  • Ten different settings

Quick-change front - simpler and cleaner

  • Swap out fluid heads in seconds
  • Non-stick polymer cover keeps gun head cleaner
  • "Air knife" reduces material build-up
  • Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule
$4,020.00
PRO XP GUN, ES, 60KV, AA

PRO XP GUN, ES, 60KV, AA

GG H60T10

GG H60T10

PRO XP GUN, ES, 60KV, AA

Pro Xp60 Air Assist Manual Electrostatic Gun, 60 kV, with standard display, standard coatings, includes AEM or AEF tip of choice Pro Xp60 kV air-assist gun is the smallest and lightest electrostatic air-assist gun on the market – delivering a consistent, high quality finish every time you spray. Pro Xp60 AA gun line includes Standard, Smart and Waterborne models. High quality spray performance with a one-piece aircap and variety of spray tips Transfer efficiency is improved over conventional air-assist guns Made in the USA The smallest profile gun with internal power supply on the market – 1 inch (2.5 cm) shorter and 4 oz (110 g) lighter Fan adjust pattern control reduces overspray by changing the fan pattern width according to the size of the part – improving quality and saving you money Every gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco's requirements
$8,880.00
Pro XP Gun, ES, Auto Rear, AA

Pro XP Gun, ES, Auto Rear, AA

GG HA1T10

GG HA1T10

Pro XP Gun, ES, Auto Rear, AA

Pro Xp Auto Air-Assist Electrostatic Spray Gun, standard model, with rear manifold, 85 kV, includes AEM or AEF tip of choice Pro Xp Auto Air-Assist has an 85 kV power supply and internal power so there’s no electrical cord to damage or replace. Standard gun models always run at 85 kV power and include an alternator speed indicator to display electrostatic performance. Ideal for high pressure spraying designed to improve transfer efficiency and deliver a high quality finish. Versatile product line gives you more models to choose from and greater spraying flexibility with air spray, air assist and waterborne guns Manifold style fits almost any systems requirement - back manifold is ideal for stationary and reciprocator systems and bottom manifold is ideal for robot mounting 85 kV power supply and internal power so there's no electrical cord to worry about damaging or replacing Higher transfer efficiency equals less waste, saving you money on material Durable components reduce cost of ownership, supported by a three year warranty
$13,020.00
Refine
×
Manufacturer