Lube

GG 17T176

LUBEPRO A4000 PUMP, RECIP GRS SP

Graco 17T176 LubePro A4000 Reciprocating Grease Pump, 7.5 lb. (3.4 kg) Reservoir, Series Progressive - NPT

Without proper lubrication your factory's machines can suffer from downtime and reduced life, which impacts your company's bottom line. Avoid the hassle. Meet your LubePro. LubePro series pumps leverages the same proven quality and leading technology as Graco's Merkur Air Motor—the leader in durability and quality.

Application: Reciprocating Grease and Oil Pump for Automatic Lubrication Solutions

• LubePro A4000 is compatible with GL-1, GL-1 X, GL-1 XL, GL-32, GL-33, GL-42 and GL-43 injectors
• Pressure Ratio of 40:1
• A4000 delivers a greater output than competitive models at 50 in³ (819 cm³) per minute
• Optional Low Level Detection available, factory installed
• Integrated vent automatically and reliably relieves pressure
• Built with high-quality seals tested to outperform the competition
• High-strength, shatter resistant reservoir
• Optimally lubricates while your machines are running
• Provides accurate, reliable lubrication for every lube point
• Provides higher lube output and faster lubrication cycle

• Model: LubePro
• Series: A4000

• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Application: In-Plant Machinery

• Compatible Material: Grease
• Compatible Metering Device: Series Progressive, Single Line Parallel

• Fluid Outlet Size (in): 0.25
• Fluid Outlet Size (mm): 6.3500
• Fluid Outlet Thread Type: NPT

• Maximum Air Inlet Pressure (bar): 6.9
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum NLGI Grade: #2

• Maximum Working Pressure (bar): 275.8
• Maximum Working Pressure (kPa): 27580
• Maximum Working Pressure (MPa): 27.6
• Maximum Working Pressure (psi): 4000

• Overall Height (cm): 50.8
• Overall Height (in): 20
• Overall Height (mm): 508
• Overall Width (cm): 40.1
• Overall Width (in): 15.8
• Overall Width (mm): 401

• Power Type: Pneumatic

GG 17T177

LUBEPRO A4000 PUMP, RECIP LL GRS SP

Graco 17T177 LubePro A4000 Reciprocating Grease Pump, 7.5 lb. (3.4 kg) Reservoir, Low Level, Series Progressive - NPT

Without proper lubrication your factory's machines can suffer from downtime and reduced life, which impacts your company's bottom line. Avoid the hassle. Meet your LubePro. LubePro series pumps leverages the same proven quality and leading technology as Graco's Merkur Air Motor—the leader in durability and quality.

Application: Reciprocating Grease and Oil Pump for Automatic Lubrication Solutions

• LubePro A4000 is compatible with GL-1, GL-1 X, GL-1 XL, GL-32, GL-33, GL-42 and GL-43 injectors
• Pressure Ratio of 40:1
• A4000 delivers a greater output than competitive models at 50 in³ (819 cm³) per minute
• Optional Low Level Detection available, factory installed
• Integrated vent automatically and reliably relieves pressure
• Built with high-quality seals tested to outperform the competition
• High-strength, shatter resistant reservoir
• Optimally lubricates while your machines are running
• Provides accurate, reliable lubrication for every lube point
• Provides higher lube output and faster lubrication cycle

• Model: LubePro
• Series: A4000

• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Application: In-Plant Machinery

• Compatible Material: Grease
• Compatible Metering Device: Series Progressive, Single Line Parallel

• Fluid Outlet Size (in): 0.25
• Fluid Outlet Size (mm): 6.3500
• Fluid Outlet Thread Type: NPT

• Includes: Low Level

• Maximum Air Inlet Pressure (bar): 6.9
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum NLGI Grade: #2

• Maximum Working Pressure (bar): 275.8
• Maximum Working Pressure (kPa): 27580
• Maximum Working Pressure (MPa): 27.6
• Maximum Working Pressure (psi): 4000

• Overall Height (cm): 50.8
• Overall Height (in): 20
• Overall Height (mm): 508
• Overall Width (cm): 40.1
• Overall Width (in): 15.8
• Overall Width (mm): 401

• Power Type: Pneumatic

GG 17T178

LUBEPRO A4000 PUMP, RECIP OIL SP

Graco 17T178 LubePro A4000 Reciprocating Oil Pump, 5.5 Liter Reservoir, Series Progressive - NPT

Without proper lubrication your factory's machines can suffer from downtime and reduced life, which impacts your company's bottom line. Avoid the hassle. Meet your LubePro. LubePro series pumps leverages the same proven quality and leading technology as Graco's Merkur Air Motor—the leader in durability and quality.

Application: Reciprocating Grease and Oil Pump for Automatic Lubrication Solutions

• LubePro A4000 is compatible with GL-1, GL-1 X, GL-1 XL, GL-32, GL-33, GL-42 and GL-43 injectors
• Pressure Ratio of 40:1
• A4000 delivers a greater output than competitive models at 50 in³ (819 cm³) per minute
• Optional Low Level Detection available, factory installed
• Integrated vent automatically and reliably relieves pressure
• Built with high-quality seals tested to outperform the competition
• High-strength, shatter resistant reservoir
• Optimally lubricates while your machines are running
• Provides accurate, reliable lubrication for every lube point
• Provides higher lube output and faster lubrication cycle

• Model: LubePro
• Series: A4000

• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Application: In-Plant Machinery

• Compatible Material: Oil
• Compatible Metering Device: Series Progressive, Single Line Parallel

• Fluid Outlet Size (in): 0.25
• Fluid Outlet Size (mm): 6.3500
• Fluid Outlet Thread Type: NPT

• Maximum Air Inlet Pressure (bar): 6.9
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum Working Pressure (bar): 275.8
• Maximum Working Pressure (kPa): 27580
• Maximum Working Pressure (MPa): 27.6
• Maximum Working Pressure (psi): 4000

• Minimum cST Grade (cST): 40

• Overall Height (cm): 50.8
• Overall Height (in): 20
• Overall Height (mm): 508
• Overall Width (cm): 40.1
• Overall Width (in): 15.8
• Overall Width (mm): 401

• Power Type: Pneumatic

GG 17T179

LUBEPRO A4000 PUMP, RECIP LL OIL SP

Graco 17T179 LubePro A4000 Reciprocating Oil Pump, 5.5 Liter Reservoir, Low Level, Series Progressive - NPT

Without proper lubrication your factory's machines can suffer from downtime and reduced life, which impacts your company's bottom line. Avoid the hassle. Meet your LubePro. LubePro series pumps leverages the same proven quality and leading technology as Graco's Merkur Air Motor—the leader in durability and quality.

Application: Reciprocating Grease and Oil Pump for Automatic Lubrication Solutions

• LubePro A4000 is compatible with GL-1, GL-1 X, GL-1 XL, GL-32, GL-33, GL-42 and GL-43 injectors
• Pressure Ratio of 40:1
• A4000 delivers a greater output than competitive models at 50 in³ (819 cm³) per minute
• Optional Low Level Detection available, factory installed
• Integrated vent automatically and reliably relieves pressure
• Built with high-quality seals tested to outperform the competition
• High-strength, shatter resistant reservoir
• Optimally lubricates while your machines are running
• Provides accurate, reliable lubrication for every lube point
• Provides higher lube output and faster lubrication cycle

• Model: LubePro
• Series: A4000

• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Application: In-Plant Machinery

• Compatible Material: Oil
• Compatible Metering Device: Series Progressive, Single Line Parallel

• Fluid Outlet Size (in): 0.25
• Fluid Outlet Size (mm): 6.3500
• Fluid Outlet Thread Type: NPT

• Includes: Low Level

• Maximum Air Inlet Pressure (bar): 6.9
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum Working Pressure (bar): 275.8
• Maximum Working Pressure (kPa): 27580
• Maximum Working Pressure (MPa): 27.6
• Maximum Working Pressure (psi): 4000

• Minimum cST Grade (cST): 40

• Overall Height (cm): 50.8
• Overall Height (in): 20
• Overall Height (mm): 508
• Overall Width (cm): 40.1
• Overall Width (in): 15.8
• Overall Width (mm): 401

• Power Type: Pneumatic

GG 17T193

LUBEPRO A4000 PUMP, RECIP GRS EVV

Graco 17T193 LubePro A4000 Reciprocating Grease Pump, 7.5 lb. (3.4 kg) Reservoir, Electric Vent Valve - NPT

Without proper lubrication your factory's machines can suffer from downtime and reduced life, which impacts your company's bottom line. Avoid the hassle. Meet your LubePro. LubePro series pumps leverages the same proven quality and leading technology as Graco's Merkur Air Motor—the leader in durability and quality.

Application: Reciprocating Grease and Oil Pump for Automatic Lubrication Solutions

• LubePro A4000 is compatible with GL-1, GL-1 X, GL-1 XL, GL-32, GL-33, GL-42 and GL-43 injectors
• Pressure Ratio of 40:1
• A4000 delivers a greater output than competitive models at 50 in³ (819 cm³) per minute
• Optional Low Level Detection available, factory installed
• Integrated vent automatically and reliably relieves pressure
• Built with high-quality seals tested to outperform the competition
• High-strength, shatter resistant reservoir
• Optimally lubricates while your machines are running
• Provides accurate, reliable lubrication for every lube point
• Provides higher lube output and faster lubrication cycle

• Model: LubePro
• Series: A4000

• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Application: In-Plant Machinery

• Compatible Material: Grease
• Compatible Metering Device: Series Progressive, Single Line Parallel

• Fluid Outlet Size (in): 0.25
• Fluid Outlet Size (mm): 6.3500
• Fluid Outlet Thread Type: NPT

• Includes: Low Level

• Maximum Air Inlet Pressure (bar): 6.9
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum NLGI Grade: #2

• Maximum Working Pressure (bar): 275.8
• Maximum Working Pressure (kPa): 27580
• Maximum Working Pressure (MPa): 27.6
• Maximum Working Pressure (psi): 4000

• Overall Height (cm): 50.8
• Overall Height (in): 20
• Overall Height (mm): 508
• Overall Width (cm): 40.1
• Overall Width (in): 15.8
• Overall Width (mm): 401

• Power Type: Pneumatic

GG 17T194

LUBEPRO A4000 PUMP, RECIP LL GRS EVV

Graco 17T194 LubePro A4000 Reciprocating Grease Pump, 7.5 lb. (3.4 kg) Reservoir, Low Level, Electric Vent Valve - NPT

Without proper lubrication your factory's machines can suffer from downtime and reduced life, which impacts your company's bottom line. Avoid the hassle. Meet your LubePro. LubePro series pumps leverages the same proven quality and leading technology as Graco's Merkur Air Motor—the leader in durability and quality.

Application: Reciprocating Grease and Oil Pump for Automatic Lubrication Solutions

• LubePro A4000 is compatible with GL-1, GL-1 X, GL-1 XL, GL-32, GL-33, GL-42 and GL-43 injectors
• Pressure Ratio of 40:1
• A4000 delivers a greater output than competitive models at 50 in³ (819 cm³) per minute
• Optional Low Level Detection available, factory installed
• Integrated vent automatically and reliably relieves pressure
• Built with high-quality seals tested to outperform the competition
• High-strength, shatter resistant reservoir
• Optimally lubricates while your machines are running
• Provides accurate, reliable lubrication for every lube point
• Provides higher lube output and faster lubrication cycle

• Model: LubePro
• Series: A4000

• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Application: In-Plant Machinery

• Compatible Material: Grease
• Compatible Metering Device: Series Progressive, Single Line Parallel

• Fluid Outlet Size (in): 0.25
• Fluid Outlet Size (mm): 6.3500
• Fluid Outlet Thread Type: NPT

• Maximum Air Inlet Pressure (bar): 6.9
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum NLGI Grade: #2

• Maximum Working Pressure (bar): 275.8
• Maximum Working Pressure (kPa): 27580
• Maximum Working Pressure (MPa): 27.6
• Maximum Working Pressure (psi): 4000

• Overall Height (cm): 50.8
• Overall Height (in): 20
• Overall Height (mm): 508
• Overall Width (cm): 40.1
• Overall Width (in): 15.8
• Overall Width (mm): 401

• Power Type: Pneumatic

GG 17T195

Lubepro A4000 Pump, Recip Oil Evv

GG 17T196

LUBEPRO A4000 PUMP, RECIP OIL LL EVV

Graco 17T196 LubePro A4000 Reciprocating Oil Pump, 5.5 Liter Reservoir, Low Level, Electric Vent Valve - NPT

Without proper lubrication your factory's machines can suffer from downtime and reduced life, which impacts your company's bottom line. Avoid the hassle. Meet your LubePro. LubePro series pumps leverages the same proven quality and leading technology as Graco's Merkur Air Motor—the leader in durability and quality.

Application: Reciprocating Grease and Oil Pump for Automatic Lubrication Solutions

• LubePro A4000 is compatible with GL-1, GL-1 X, GL-1 XL, GL-32, GL-33, GL-42 and GL-43 injectors
• Pressure Ratio of 40:1
• A4000 delivers a greater output than competitive models at 50 in³ (819 cm³) per minute
• Optional Low Level Detection available, factory installed
• Integrated vent automatically and reliably relieves pressure
• Built with high-quality seals tested to outperform the competition
• High-strength, shatter resistant reservoir
• Optimally lubricates while your machines are running
• Provides accurate, reliable lubrication for every lube point
• Provides higher lube output and faster lubrication cycle

• Model: LubePro
• Series: A4000

• Air Inlet Size (in): 0.2502
• Air Inlet Size (mm): 6.35

• Application: In-Plant Machinery

• Compatible Material: Oil
• Compatible Metering Device: Series Progressive, Single Line Parallel

• Fluid Outlet Size (in): 0.25
• Fluid Outlet Size (mm): 6.3500
• Fluid Outlet Thread Type: NPT

• IP Rating: IP69K

• Maximum Voltage (V ac): 264

• Maximum Working Pressure (bar): 275.8
• Maximum Working Pressure (kPa): 27580
• Maximum Working Pressure (MPa): 27.6
• Maximum Working Pressure (psi): 4000

• Minimum cST Grade (cST): 40

• Minimum Voltage (V ac): 88

• Power Type: Electric

GG 18C750

LUBEPRO A2600 PUMP, GREASE, EU

Graco 18C750 LubePro A2600 Horizontal Grease Pump, 2 Liter Reservoir - BSPP

Without proper lubrication your factory's machines can suffer from downtime and reduced life, which impacts your company's bottom line. Avoid the hassle. LubePro series leverages the same proven quality and leading technology as Graco's Fire-Ball pump - the leader in durability and quality for over 50 years.

Application: Single Stroke Grease Pump for Automatic Lubrication

• LubePro A2600 is compatible with GL-1, GL-32 and GL-33 injectors
• Pressure Ratio of 26:1
• A2600 delivers a greater output than competitive models at 2.2 in³ (36.05 cm³) per stroke
• Optional Low Level Detection available, factory installed
• Integrated vent automatically and reliably relieves pressure on return stroke, no pressure switch or wiring required
• Built with high-quality seals tested to outperform the competition
• High-strength, shatter resistant, 2 liter reservoir
• Optimally lubricates while your machines are running
• Provides accurate, reliable lubrication for every lube point
• Provides higher lube output and faster lubrication cycle

• Model: LubePro
• Series: A2600

• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: In-Plant Machinery

• Compatible Material: Grease
• Compatible Metering Device: Series Progressive, Single Line Parallel

• Fluid Outlet Size (in): 0.75
• Fluid Outlet Size (mm): 19.0500
• Fluid Outlet Thread Type: NPT

• Maximum Air Inlet Pressure (bar): 9.31
• Maximum Air Inlet Pressure (kPa): 931
• Maximum Air Inlet Pressure (psi): 135

• Maximum NLGI Grade: #2

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (kPa): 24100
• Maximum Working Pressure (MPa): 24.1
• Maximum Working Pressure (psi): 3500

• Overall Height (cm): 47.3
• Overall Height (in): 18.62
• Overall Height (mm): 473
• Overall Width (cm): 39.4
• Overall Width (in): 15.5
• Overall Width (mm): 394

• Power Type: Pneumatic

GG 18C752

LUBEPRO A1900 PUMP, LL, OIL, EU

Graco 18C752 LubePro A1900 Horizontal Oil Pump, 2 L Reservoir, Normally Open, Low Level - BSPP

Without proper lubrication your factory's machines can suffer from downtime and reduced life, which impacts your company's bottom line. Avoid the hassle. LubePro series leverages the same proven quality and leading technology as Graco's Fire-Ball pump - the leader in durability and quality for over 50 years.

Application: Single Stroke Oil Pump for Automatic Lubrication

• LubePro A1900 is compatible with GL-42 and GL-43 injectors
• Pressure Ratio of 19:1
• A1900 delivers a greater output than competitive models at 3.0 in³ (49.16 cm³) per stroke
• Optional Low Level Detection available, factory installed
• Integrated vent automatically and reliably relieves pressure on return stroke, no pressure switch or wiring required
• Built with high-quality seals tested to outperform the competition
• High-strength, shatter resistant, 2 liter reservoir
• Optimally lubricates while your machines are running
• Provides accurate, reliable lubrication for every lube point
• Provides higher lube output and faster lubrication cycle

• Model: LubePro
• Series: A1900

• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Application: In-Plant Machinery

• Compatible Material: Oil
• Compatible Metering Device: Series Progressive, Single Line Parallel

• Fluid Outlet Size (in): 0.75
• Fluid Outlet Size (mm): 19.0500
• Fluid Outlet Thread Type: NPT

• Includes: Low Level

• Maximum Air Inlet Pressure (bar): 12.76
• Maximum Air Inlet Pressure (kPa): 1276
• Maximum Air Inlet Pressure (psi): 185

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (kPa): 24100
• Maximum Working Pressure (MPa): 24.1
• Maximum Working Pressure (psi): 3500

• Minimum cST Grade (cST): 40

• Overall Height (cm): 47.3
• Overall Height (in): 18.62
• Overall Height (mm): 473
• Overall Width (cm): 39.4
• Overall Width (in): 15.5
• Overall Width (mm): 394

• Power Type: Pneumatic

GG 18C753

LUBEPRO A1900 PUMP, OIL, EU

Graco 18C753 LubePro A1900 Horizontal Oil Pump, 2 L Reservoir - BSPP

Without proper lubrication your factory's machines can suffer from downtime and reduced life, which impacts your company's bottom line. Avoid the hassle. LubePro series leverages the same proven quality and leading technology as Graco's Fire-Ball pump - the leader in durability and quality for over 50 years.

Application: Single Stroke Oil Pump for Automatic Lubrication

• LubePro A1900 is compatible with GL-42 and GL-43 injectors
• Pressure Ratio of 19:1
• A1900 delivers a greater output than competitive models at 3.0 in³ (49.16 cm³) per stroke
• Optional Low Level Detection available, factory installed
• Integrated vent automatically and reliably relieves pressure on return stroke, no pressure switch or wiring required
• Built with high-quality seals tested to outperform the competition
• High-strength, shatter resistant, 2 liter reservoir
• Optimally lubricates while your machines are running
• Provides accurate, reliable lubrication for every lube point
• Provides higher lube output and faster lubrication cycle

• Model: LubePro
• Series: A1900

• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Application: In-Plant Machinery

• Compatible Material: Oil
• Compatible Metering Device: Series Progressive, Single Line Parallel

• Fluid Outlet Size (in): 0.75
• Fluid Outlet Size (mm): 19.0500
• Fluid Outlet Thread Type: NPT

• Maximum Air Inlet Pressure (bar): 12.76
• Maximum Air Inlet Pressure (kPa): 1276
• Maximum Air Inlet Pressure (psi): 185

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (kPa): 24100
• Maximum Working Pressure (MPa): 24.1
• Maximum Working Pressure (psi): 3500

• Minimum cST Grade (cST): 40

• Overall Height (cm): 47.3
• Overall Height (in): 18.62
• Overall Height (mm): 473
• Overall Width (cm): 39.4
• Overall Width (in): 15.5
• Overall Width (mm): 394

• Power Type: Pneumatic

GG 2002774

DYNA-STAR PUMP, 70:1, 120#

Dyna-Star® 70:1 Air-Powered Bare Grease Pump for 120 lb (55 kg) Keg

Reliable Drop-In Replacement for Competitive 75:1 Grease Pumps

For use in large rope shovel, drag line, open gear and industrial applications. Legendary Merkur Air Motor - Proven air valve is DataTrak®-ready. Fast and Easy Seal Repairs - Hex-style heavy-duty lower withstands harsh field conditions and aids intuitive seal replacements. 100% assembled and tested in the USA. Compact design allows for easier installation in tighter spaces.

GG 2002775

DYNA-STAR PUMP, 70:1, 400#

Dyna-Star® 70:1 Air-Powered Bare Grease Pump for 400 lb (180 kg) Barrel

Reliable Drop-In Replacement for Competitive 75:1 Grease Pumps

For use in large rope shovel, drag line, open gear and industrial applications. Legendary Merkur Air Motor - Proven air valve is DataTrak®-ready. Fast and Easy Seal Repairs - Hex-style heavy-duty lower withstands harsh field conditions and aids intuitive seal replacements. 100% assembled and tested in the USA. Compact design allows for easier installation in tighter spaces.

GG 20A596

G3 Pro Pump, G-24Pr-8Lfl, 30Ft Cable

GG 20A597

G3 Standard Pump, G-24Nc-8Lfa, 30Ft Cable

GG 224742

DYNA-STAR PUMP, HYDRAULIC, 1:1, 55

Hydraulic Dyna-Star® 1:1 55 Gallon (200 Liter) Drum Oil Pump

Hydraulic Dyna-Star pumps provide reliable, quiet, ice-free performance at maximum pressure and low-flow rates and are up to three times more energy efficient than comparable compressed-air systems.

Built-In Reliability - Self-lubricating vertical design for long life and reliable operation in high-vibration environments. Quiet Hydraulic Motor - No need for add-on mufflers. High-Efficiency Motor - Uses less hydraulic oil.

GG 224751

Dyna-Star Pump, Hydraulic, 5:1

GG 224752

DYNA-STAR PUMP, HYDRAULIC, 5:1

Hydraulic Dyna-Star® 5:1 400 lb (180 kg). Grease Pump

Hydraulic Dyna-Star pumps provide reliable, quiet, ice-free performance at maximum pressure and low-flow rates and are up to three times more energy efficient than comparable compressed-air systems.

Built-In Reliability - Self-lubricating vertical design for long life and reliable operation in high-vibration environments. Quiet Hydraulic Motor - No need for add-on mufflers. High-Efficiency Motor - Uses less hydraulic oil.

GG 224912

Dyna-Star Pump, Hydraulic, 5:1

GG 237653

DYNA-STAR PUMP, 1:1 , SST

Hydraulic Dyna-Star® 1:1 Universal Stainless Steel Oil Pump

Hydraulic Dyna-Star pumps provide reliable, quiet, ice-free performance at maximum pressure and low-flow rates and are up to three times more energy efficient than comparable compressed-air systems.

Built-In Reliability

• Self-lubricating vertical design for long life and reliable operation in high-vibration environments.

Quiet Hydraulic Motor

• No need for add-on mufflers.

High-Efficiency Motor

• Uses less hydraulic oil.

GG 244632

Dyna-Star System, Bulk Oil

GG 247443

DYNA-STAR HYDRAULIC PUMP, GREASE , 120#

Hydraulic Dyna-Star® 10:1 High Ratio Lubrication Pump - 120 lb (55 kg).

Graco’s 5:1 and 10:1, hydraulically-powered lubrication pumps designed for long life and reliable operation in demanding off-road mobile applications. Hydraulic Dyna-Star pumps provide reliable, quiet, ice-free performance at maximum pressure and low flow rates and are up to three times more energy efficient than comparable compressed-air systems.

Electric pumps for heavy duty automatic lubrication and transfer systems. Uses up to 3 times less energy than pneumatic systems Fewer moving parts reduces pump wear and maintenance Self-lubricating for long-life and dependable operations Ultra-quiet hydraulic motor Graco's reciprocator piston minimizes change-over stalls No assembly required, fits in a standard 120 lb (55 kg) grease drum Lighter, more compact design than competition Easy to connect, low-pressure hydraulic input

GG 247540

Dyna-Star Hydraulic Pump, Grease

GG 24E017

Dyna-Star Electric Valve, Sol W/Conn, 24 Vdc

GG 24Z020

LUBEPRO A2800 PUMP, OIL, 0.6L

Graco 24Z020 LubePro A2800 Vertical Oil Pumps, 0.6 liter Reservoir - NPT

Without proper lubrication your factory's machines can suffer from downtime and reduced life, which impacts your company's bottom line. Avoid the hassle. LubePro series leverages the same proven quality and leading technology as Graco's Fire-Ball pump - the leader in durability and quality for over 50 years.

Application: Single Stroke Oil Pump for Automatic Lubrication

• LubePro A2800 is compatible with GL-1, GL-32 and GL-33 injectors
• Pressure Ratio of 28:1
• A2800 delivers a greater output than competitive models at 0.56 in³ (9.18 cm³) per stroke
• Factory installed Low Level Detection available
• Integrated vent automatically and reliably relieves pressure on return stroke, no pressure switch or wiring required
• Built with high-quality seals tested to outperform the competition
• High-strength, shatter resistant, 0.6 liter reservoir
• Optimally lubricates while your machines are running
• Provides accurate, reliable lubrication for every lube point
• Provides higher lube output and faster lubrication cycle

• Model: LubePro
• Series: A2800

• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: In-Plant Machinery

• Compatible Material: Oil
• Compatible Metering Device: Series Progressive, Single Line Parallel

• Fluid Outlet Size (in): 0.25
• Fluid Outlet Size (mm): 6.3500
• Fluid Outlet Thread Type: NPT

• Maximum Air Inlet Pressure (bar): 12.07
• Maximum Air Inlet Pressure (kPa): 1207
• Maximum Air Inlet Pressure (psi): 175

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (kPa): 24100
• Maximum Working Pressure (MPa): 24.1
• Maximum Working Pressure (psi): 3500

• Minimum cST Grade (cST): 40

• Overall Depth (cm): 13
• Overall Depth (in): 5.1
• Overall Depth (mm): 130

• Overall Height (cm): 31.8
• Overall Height (in): 12.53
• Overall Height (mm): 318
• Overall Width (cm): 13.3
• Overall Width (in): 5.25
• Overall Width (mm): 133

• Power Type: Pneumatic