Lube

GG 25U317

Dyna-Star Compact System, Cds 60#, Glcx No Afso

GG 25U318

DYNA-STAR COMPACT SYSTEM, CDS 60#, GLCX AFSO

DYNA-STAR COMPACT SYSTEM,CDS 60#,GLCX AFSO

GG 25Y498

LUBEPRO H1900 PUMP, EU

Graco 25Y498 LubePro H1900 Horizontal Oil Pump - BSPP

Without proper lubrication your factory's machines can suffer from downtime and reduced life, which impacts your company's bottom line. Avoid the hassle. LubePro series leverages the same proven quality and leading technology as Graco's Fire-Ball® pump - the leader in durability and quality for over 50 years.

Application: Single Stroke Oil Pump for Automatic Lubrication

• LubePro H1900 is compatible with GL-42 and GL-43 injectors
• Pressure Ratio of 19:1
• H1900 delivers a greater output than competitive models at 3.0 in³ (49.2 cm³) per stroke
• Pneumatic power makes it easy to install into existing air line
• Optional Low Level Detection available, factory installed
• Built with high-quality seals tested to outperform the competition
• Optimally lubricates while your machines are running
• Provides accurate, reliable lubrication for every lube point
• Provides higher lube output and faster lubrication cycle

• Model: LubePro
• Series: H1900

• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Application: In-Plant Machinery

• Compatible Material: Oil
• Compatible Metering Device: Series Progressive, Single Line Parallel

• Fluid Outlet Size (in): 0.25
• Fluid Outlet Size (mm): 6.3500
• Fluid Outlet Thread Type: BSPP

• Maximum Air Inlet Pressure (bar): 12.76
• Maximum Air Inlet Pressure (kPa): 1276
• Maximum Air Inlet Pressure (psi): 185

• Maximum Fill Inlet Pressure (bar): 5.52
• Maximum Fill Inlet Pressure (kPa): 552
• Maximum Fill Inlet Pressure (psi): 80

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (kPa): 24100
• Maximum Working Pressure (MPa): 24.1
• Maximum Working Pressure (psi): 3500

• Minimum cST Grade (cST): 40

• Overall Width (cm): 39.4
• Overall Width (in): 15.5
• Overall Width (mm): 394

• Power Type: Pneumatic

GG 25Y499

LUBEPRO H1900 PUMP, LL, EU

Graco 25Y499 LubePro H1900 Horizontal Oil Pump, Low Level - BSPP

Without proper lubrication your factory's machines can suffer from downtime and reduced life, which impacts your company's bottom line. Avoid the hassle. LubePro series leverages the same proven quality and leading technology as Graco's Fire-Ball® pump - the leader in durability and quality for over 50 years.

Application: Single Stroke Oil Pump for Automatic Lubrication

• LubePro H1900 is compatible with GL-42 and GL-43 injectors
• Pressure Ratio of 19:1
• H1900 delivers a greater output than competitive models at 3.0 in³ (49.2 cm³) per stroke
• Pneumatic power makes it easy to install into existing air line
• Optional Low Level Detection available, factory installed
• Built with high-quality seals tested to outperform the competition
• Optimally lubricates while your machines are running
• Provides accurate, reliable lubrication for every lube point
• Provides higher lube output and faster lubrication cycle

• Model: LubePro
• Series: H1900

• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Application: In-Plant Machinery

• Compatible Material: Oil
• Compatible Metering Device: Series Progressive, Single Line Parallel

• Fluid Outlet Size (in): 0.25
• Fluid Outlet Size (mm): 6.3500
• Fluid Outlet Thread Type: BSPP

• Includes: Low Level

• Maximum Air Inlet Pressure (bar): 12.76
• Maximum Air Inlet Pressure (kPa): 1276
• Maximum Air Inlet Pressure (psi): 185

• Maximum Fill Inlet Pressure (bar): 5.52
• Maximum Fill Inlet Pressure (kPa): 552
• Maximum Fill Inlet Pressure (psi): 80

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (kPa): 24100
• Maximum Working Pressure (MPa): 24.1
• Maximum Working Pressure (psi): 3500

• Minimum cST Grade (cST): 40

• Overall Width (cm): 39.4
• Overall Width (in): 15.5
• Overall Width (mm): 394

• Power Type: Pneumatic

GG 26A866

G3 Pro Pump, G-12Pr-2L0007-00C00000

GG 26C186

Fireball 300 Lubricator, Chassis 50-1 Flex

GG 563579

LUBRISYSTEM PUMP, AIR (NO RES)

LubriSystem Standard Air Operated Pump without Reservoir

Easy to design, modify and adjust for oil or grease applications large or small. Great for operation of piston distributors. Rugged construction maximizes your productivity - upgrading to the internal timer control completely automates the system. All packages include internal pressure relief, so no need to install extra parts with additional costs. Combine with LubriSystem injectors for easy, low cost system design solutions.

Air Operated Pump for Single Line Parallel Systems

Ability to serve large systems - up to 100 lube points or more

Efficient design promotes increased productivity and less downtime

No reservoir included

Lubriquip part number 550-000-280

GG 82/0703/11

Grease, 3Oz Tube

GG 965124

FIREBALL 425 PUMP, 10:1, STUBBY

Fire-Ball® 425 Series 10:1 400 lb (180 kg). Stubby Mount Air-Powered Grease Pump

The Fire-Ball 425 features a 4.25 inch (107.9 mm) air motor to supply the power you need for long pipe runs and higher-volume dispensing. An ideal choice for applications where multiple dispenses happen at the same time.

The Fire-Ball 425 is the pump of choice for your most demanding high volume applications. Durable Casting - Thick cast aluminum air motor housing offers unmatched durability. Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost. Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated "dirty" air environments for long life without repair. Extended Seal Life - In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life. Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life.

GG 96G039

G3 STANDARD PUMP, G-12NC-8L0000-00C00000

Graco 96G039 G3® Standard Grease Lubrication Pump, 12 VDC, 8 Liter, CPC

Extend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Standard has a flexible design that works with injector-based and series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.

• No internal controller–use with separate or existing machine control for a low cost solution
• Capable of sending a low level signal to your external controller or PLC

• Model: G3
• Series: Standard

• Application: On-Road Vehicles, Off-Road Equipment

• Compatible Material: Grease
• Compatible Metering Device: Series Progressive, Single Line Parallel

• Control Options: Standard

• Fluid Outlet Size (in): 0.25
• Fluid Outlet Size (mm): 6.3500
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPSF

• For Use With: Injector-Based Systems, Series Progressive Systems

• Includes: Wiper Arm

• IP Rating: IP69K

• Maximum Fill Inlet Pressure (bar): 344.7
• Maximum Fill Inlet Pressure (kPa): 34470
• Maximum Fill Inlet Pressure (psi): 5000

• Maximum NLGI Grade: #2

• Maximum Run Time (min): 30

• Maximum Voltage (V dc): 16

• Maximum Working Pressure (bar): 351.6
• Maximum Working Pressure (kPa): 35160
• Maximum Working Pressure (MPa): 35.1
• Maximum Working Pressure (psi): 5100

• Minimum Voltage (V dc): 9

• Number of Pump Elements: Up to 3

• Overall Depth (cm): 25.4
• Overall Depth (in): 10
• Overall Depth (mm): 254

• Overall Height (cm): 47
• Overall Height (in): 18.5
• Overall Height (mm): 470
• Overall Width (cm): 23.5
• Overall Width (in): 9.25
• Overall Width (mm): 235

• Power Connection Type: CPC

• Power Type: Electric

GG 96G140

G3 PRO PUMP, G-ACPR-8L0000-0D000000

Graco 96G140 G3® Pro Grease Lubrication Pump, 90-240 VAC, 8 Liter, DIN

Extend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Pro has a flexible design that works with series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element - standard, plus room for two more. The ultimate in flexibility - for a high value, custom fit on your application.

• Built-in controller with selectable pump on/pump off timer
• Low level indicator provides low warning and shut-down alarm
• Manual run initiates lube cycle on-demand (remote option also available)
• Pre-lube function can initiate lube cycle on start-up

• Model: G3
• Series: Pro

• Alarm Relay Inductive Maximum Operating Current (A): 1.5
• Alarm Relay Inductive Maximum Operating Voltage (VAC): 250
• Alarm Relay Inductive Maximum Switching Capacity: 25 VA, 30 W
• Alarm Relay Inductive Minimum Permissible Load: 10 ?A, 10m VDC
• Alarm Relay Inductive Rated Load (A): 0.2
• Alarm Relay Resistive Maximum Operating Current (A): 3
• Alarm Relay Resistive Maximum Operating Voltage (VAC): 250
• Alarm Relay Resistive Maximum Switching Capacity: 50 VA, 60 W
• Alarm Relay Resistive Rated Load (A): 0.4

• Application: On-Road Vehicles, Off-Road Equipment

• Compatible Material: Grease
• Compatible Metering Device: Series Progressive

• Control Options: Pro

• Fluid Outlet Size (in): 0.25
• Fluid Outlet Size (mm): 6.3500
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPSF

• For Use With: Injector-Based Systems, Series Progressive Systems

• Includes: Wiper Arm

• Input Cycle Rate (Hz): 8
• Input Impedance: 1.1
• Input Load Current (mA @ 24 VDC): 22
• Input Maximum Off Current (mA): 1.5
• Input Maximum Residual Voltage (V): 4
• Input Required Switch Type: Normally Open
• Input Response Time (ms): 60
• Input Sensor Voltage (VDC): 24

• IP Rating: IP69K

• Low Level Carry Current (A): 1.2
• Low Level Contact Rating (W): 10
• Low Level Switch Rating (VDC): 200
• Low Level Switching Current (A): 0.5

• Maximum Fill Inlet Pressure (bar): 344.7
• Maximum Fill Inlet Pressure (kPa): 34470
• Maximum Fill Inlet Pressure (psi): 5000

• Maximum NLGI Grade: #2

• Maximum Run Time (min): 30

• Maximum Voltage (V ac): 264

• Maximum Working Pressure (bar): 351.6
• Maximum Working Pressure (kPa): 35160
• Maximum Working Pressure (MPa): 35.1
• Maximum Working Pressure (psi): 5100

• Minimum Voltage (V ac): 88

• Number of Machine Count Sensor Inputs: 1
• Number of Pressure and Cycle Sensor Inputs: 3
• Number of Pump Elements: Up to 3

• Overall Depth (cm): 25.4
• Overall Depth (in): 10
• Overall Depth (mm): 254

• Overall Height (cm): 47
• Overall Height (in): 18.5
• Overall Height (mm): 470
• Overall Width (cm): 23.5
• Overall Width (in): 9.25
• Overall Width (mm): 235

• Power Connection Type: DIN

• Power Type: Electric

• P

GG 96G206

G3 Max Pump, G-24Mx-2L0L07-0D00A000

GG 96G211

G3 Pro Pump, G-24Pr-4Lal05-00C00000

GG 96G233

G3 Standard Pump, G-12Nc-8L0A00-0D00L000

GG 96G238

G3 Standard Pump, G-24Nc-4L0A06-00C00000

GG 96G239

G3 Standard Pump, G-24Nc-2L0A06-00C00000

GG 96G240

G3 Standard Pump, G-24Nc-120A00-0D00L000

GG 96G241

G3 Standard Pump, G-24Nc-160A00-0D00L000

GG 96G243

G3 Standard Pump, G3-G-24Nc-2Lfa00-0D00L000

GG 96G258

G3 Standard Pump, A-24Nc-160A00-L0C00000

GG 96G261

G3 Standard Pump, G-24Nc-2L0A07-L0C00000

GG 96G264

G3 Standard Pump, G-24Nc-8Lla00-L0C00000

GG 96G265

G3 Standard Pump, G-24Nc-16La00-L0C00000

GG 96G268

G3 Pro Pump, G-24Pr-8Lll05-00C00000

GG 96G270

G3 Pro Pump, G-24Pr-8Lfl07-00C00000