Airpower | INGERSOLL-RAND IR TOOL S12880 branded products

CHAIN BLOCK, 20T, 20'LIFT

IR KM2000-20-18

KM2000-20-18 Manual Chain Hoist, 20 Ton Capacity, 20ft of Lift, 18ft Hand Chain Drop

1/4 - 20 metric ton Lifting Capacity. Ingersoll Rand Kinetic Series premium manual chain hoists are engineered for the harshest of environments and deliver exceptional durability to meet your toughest demands. With grade 100 Electro-galvanized chain, cast hook latches, all steel construction and extensive use of bearings these hoists are designed to LAST with minimal down time.

Product Application/Uses:

Ideal for the Rental and Construction markets

Features and Benefits:

All steel construction for exceptional durability and light weight
Reinforced double pawl brake with large diameter pawl springs for a highly dependable brake system
Full bearing construction on load sprockets and pinion shaft for reduced pull effort and longer life
Premium grade 100, Electro-Galvanized chain designed for exceptional corrosion resistance for increased durability.
Heavy duty cast hook latches designed for less latch replacements
CE certified; hoists meet or exceed regional requirements including ASME B30.16, HST-2M

Capacity (lb): 44100

Lift (ft): 20

$14,863.50

CHAIN BLOCK, OVERLOAD

IR KM2000V-10-8

KM2000V-10-8 Manual Chain Hoist, 20 Ton Capacity, 10ft of Lift, 8ft Hand Chain Drop, Overload Protection

1/4 - 20 metric ton Lifting Capacity. Ingersoll Rand Kinetic Series premium manual chain hoists are engineered for the harshest of environments and deliver exceptional durability to meet your toughest demands. With grade 100 Electro-galvanized chain, cast hook latches, all steel construction and extensive use of bearings these hoists are designed to LAST with minimal down time.

Product Application/Uses:

Ideal for the Rental and Construction markets

Features and Benefits:

All steel construction for exceptional durability and light weight
Reinforced double pawl brake with large diameter pawl springs for a highly dependable brake system
Full bearing construction on load sprockets and pinion shaft for reduced pull effort and longer life
Premium grade 100, Electro-Galvanized chain designed for exceptional corrosion resistance for increased durability.
Heavy duty cast hook latches designed for less latch replacements
CE certified; hoists meet or exceed regional requirements including ASME B30.16, HST-2M

Capacity (lb): 44100

Lift (ft): 10

$13,162.50

CHAIN BLOCK, OVERLOAD

IR KM2000V-20-18

KM2000V-20-18 Manual Chain Hoist, 20 Ton Capacity, 20ft of Lift, 18ft Hand Chain Drop, Overload Protection

1/4 - 20 metric ton Lifting Capacity. Ingersoll Rand Kinetic Series premium manual chain hoists are engineered for the harshest of environments and deliver exceptional durability to meet your toughest demands. With grade 100 Electro-galvanized chain, cast hook latches, all steel construction and extensive use of bearings these hoists are designed to LAST with minimal down time.

Product Application/Uses:

Ideal for the Rental and Construction markets

Features and Benefits:

All steel construction for exceptional durability and light weight
Reinforced double pawl brake with large diameter pawl springs for a highly dependable brake system
Full bearing construction on load sprockets and pinion shaft for reduced pull effort and longer life
Premium grade 100, Electro-Galvanized chain designed for exceptional corrosion resistance for increased durability.
Heavy duty cast hook latches designed for less latch replacements
CE certified; hoists meet or exceed regional requirements including ASME B30.16, HST-2M

Capacity (lb): 44100

Lift (ft): 20

$15,106.50

CHAIN BLOCK, OLP 20T 30FT LIFT

IR KM2000V-30-28

KM2000V-30-28 Manual Chain Hoist, 20 Ton Capacity, 30ft of Lift, 28ft Hand Chain Drop, Overload Protection

1/4 - 20 metric ton Lifting Capacity. Ingersoll Rand Kinetic Series premium manual chain hoists are engineered for the harshest of environments and deliver exceptional durability to meet your toughest demands. With grade 100 Electro-galvanized chain, cast hook latches, all steel construction and extensive use of bearings these hoists are designed to LAST with minimal down time.

Product Application/Uses:

Ideal for the Rental and Construction markets

Features and Benefits:

All steel construction for exceptional durability and light weight
Reinforced double pawl brake with large diameter pawl springs for a highly dependable brake system
Full bearing construction on load sprockets and pinion shaft for reduced pull effort and longer life
Premium grade 100, Electro-Galvanized chain designed for exceptional corrosion resistance for increased durability.
Heavy duty cast hook latches designed for less latch replacements
CE certified; hoists meet or exceed regional requirements including ASME B30.16, HST-2M

Capacity (lb): 44100

Lift (ft): 30

$17,050.50

CHAIN BLOCK, 2T, 10'LIFT

IR KM200-10-8

KM200-10-8 Manual Chain Hoist, 2 Ton Capacity, 10ft of Lift, 8ft Hand Chain Drop

1/4 - 20 metric ton Lifting Capacity. Ingersoll Rand Kinetic Series premium manual chain hoists are engineered for the harshest of environments and deliver exceptional durability to meet your toughest demands. With grade 100 Electro-galvanized chain, cast hook latches, all steel construction and extensive use of bearings these hoists are designed to LAST with minimal down time.

Product Application/Uses:

Ideal for the Rental and Construction markets

Features and Benefits:

All steel construction for exceptional durability and light weight
Reinforced double pawl brake with large diameter pawl springs for a highly dependable brake system
Full bearing construction on load sprockets and pinion shaft for reduced pull effort and longer life
Premium grade 100, Electro-Galvanized chain designed for exceptional corrosion resistance for increased durability.
Heavy duty cast hook latches designed for less latch replacements
CE certified; hoists meet or exceed regional requirements including ASME B30.16, HST-2M

Capacity (lb): 4400

Lift (ft): 10

$1,668.60

CHAIN BLOCK, 2T, 20'LIFT

IR KM200-20-18

KM200-20-18 Manual Chain Hoist, 2 Ton Capacity, 20ft of Lift, 18ft Hand Chain Drop

1/4 - 20 metric ton Lifting Capacity. Ingersoll Rand Kinetic Series premium manual chain hoists are engineered for the harshest of environments and deliver exceptional durability to meet your toughest demands. With grade 100 Electro-galvanized chain, cast hook latches, all steel construction and extensive use of bearings these hoists are designed to LAST with minimal down time.

Product Application/Uses:

Ideal for the Rental and Construction markets

Features and Benefits:

All steel construction for exceptional durability and light weight
Reinforced double pawl brake with large diameter pawl springs for a highly dependable brake system
Full bearing construction on load sprockets and pinion shaft for reduced pull effort and longer life
Premium grade 100, Electro-Galvanized chain designed for exceptional corrosion resistance for increased durability.
Heavy duty cast hook latches designed for less latch replacements
CE certified; hoists meet or exceed regional requirements including ASME B30.16, HST-2M

Capacity (lb): 4400

Lift (ft): 20

$2,016.90

CHAIN BLOCK, 2T, 30'LIFT

IR KM200-30-28

KM200-30-28 Manual Chain Hoist, 2 Ton Capacity, 30ft of Lift, 28ft Hand Chain Drop

1/4 - 20 metric ton Lifting Capacity. Ingersoll Rand Kinetic Series premium manual chain hoists are engineered for the harshest of environments and deliver exceptional durability to meet your toughest demands. With grade 100 Electro-galvanized chain, cast hook latches, all steel construction and extensive use of bearings these hoists are designed to LAST with minimal down time.

Product Application/Uses:

Ideal for the Rental and Construction markets

Features and Benefits:

All steel construction for exceptional durability and light weight
Reinforced double pawl brake with large diameter pawl springs for a highly dependable brake system
Full bearing construction on load sprockets and pinion shaft for reduced pull effort and longer life
Premium grade 100, Electro-Galvanized chain designed for exceptional corrosion resistance for increased durability.
Heavy duty cast hook latches designed for less latch replacements
CE certified; hoists meet or exceed regional requirements including ASME B30.16, HST-2M

Capacity (lb): 4400

Lift (ft): 30

$2,365.20

CHAIN BLOCK, OVERLOAD

IR KM200V-10-8

KM200V-10-8 Manual Chain Hoist, 2 Ton Capacity, 10ft of Lift, 8ft Hand Chain Drop, Overload Protection

1/4 - 20 metric ton Lifting Capacity. Ingersoll Rand Kinetic Series premium manual chain hoists are engineered for the harshest of environments and deliver exceptional durability to meet your toughest demands. With grade 100 Electro-galvanized chain, cast hook latches, all steel construction and extensive use of bearings these hoists are designed to LAST with minimal down time.

Product Application/Uses:

Ideal for the Rental and Construction markets

Features and Benefits:

All steel construction for exceptional durability and light weight
Reinforced double pawl brake with large diameter pawl springs for a highly dependable brake system
Full bearing construction on load sprockets and pinion shaft for reduced pull effort and longer life
Premium grade 100, Electro-Galvanized chain designed for exceptional corrosion resistance for increased durability.
Heavy duty cast hook latches designed for less latch replacements
CE certified; hoists meet or exceed regional requirements including ASME B30.16, HST-2M

Capacity (lb): 4400

Lift (ft): 10

$1,749.60

CHAIN BLOCK, OVERLOAD

IR KM200V-20-18

KM200V-20-18 Manual Chain Hoist, 2 Ton Capacity, 20ft of Lift, 18ft Hand Chain Drop, Overload Protection

1/4 - 20 metric ton Lifting Capacity. Ingersoll Rand Kinetic Series premium manual chain hoists are engineered for the harshest of environments and deliver exceptional durability to meet your toughest demands. With grade 100 Electro-galvanized chain, cast hook latches, all steel construction and extensive use of bearings these hoists are designed to LAST with minimal down time.

Product Application/Uses:

Ideal for the Rental and Construction markets

Features and Benefits:

All steel construction for exceptional durability and light weight
Reinforced double pawl brake with large diameter pawl springs for a highly dependable brake system
Full bearing construction on load sprockets and pinion shaft for reduced pull effort and longer life
Premium grade 100, Electro-Galvanized chain designed for exceptional corrosion resistance for increased durability.
Heavy duty cast hook latches designed for less latch replacements
CE certified; hoists meet or exceed regional requirements including ASME B30.16, HST-2M

Capacity (lb): 4400

Lift (ft): 20

$2,114.10

CHAIN BLOCK, OVERLOAD

IR KM200V-15-13

KM200V-15-13 Manual Chain Hoist, 2 Ton Capacity, 15ft of Lift, 13ft Hand Chain Drop, Overload Protection

1/4 - 20 metric ton Lifting Capacity. Ingersoll Rand Kinetic Series premium manual chain hoists are engineered for the harshest of environments and deliver exceptional durability to meet your toughest demands. With grade 100 Electro-galvanized chain, cast hook latches, all steel construction and extensive use of bearings these hoists are designed to LAST with minimal down time.

Product Application/Uses:

Ideal for the Rental and Construction markets

Features and Benefits:

All steel construction for exceptional durability and light weight
Reinforced double pawl brake with large diameter pawl springs for a highly dependable brake system
Full bearing construction on load sprockets and pinion shaft for reduced pull effort and longer life
Premium grade 100, Electro-Galvanized chain designed for exceptional corrosion resistance for increased durability.
Heavy duty cast hook latches designed for less latch replacements
CE certified; hoists meet or exceed regional requirements including ASME B30.16, HST-2M

Capacity (lb): 4400

Lift (ft): 15

$1,952.10

CHAIN BLOCK, OLP 2T 30FT LIFT

IR KM200V-30-28

KM200V-30-28 Manual Chain Hoist, 2 Ton Capacity, 30ft of Lift, 28ft Hand Chain Drop, Overload Protection

1/4 - 20 metric ton Lifting Capacity. Ingersoll Rand Kinetic Series premium manual chain hoists are engineered for the harshest of environments and deliver exceptional durability to meet your toughest demands. With grade 100 Electro-galvanized chain, cast hook latches, all steel construction and extensive use of bearings these hoists are designed to LAST with minimal down time.

Product Application/Uses:

Ideal for the Rental and Construction markets

Features and Benefits:

All steel construction for exceptional durability and light weight
Reinforced double pawl brake with large diameter pawl springs for a highly dependable brake system
Full bearing construction on load sprockets and pinion shaft for reduced pull effort and longer life
Premium grade 100, Electro-Galvanized chain designed for exceptional corrosion resistance for increased durability.
Heavy duty cast hook latches designed for less latch replacements
CE certified; hoists meet or exceed regional requirements including ASME B30.16, HST-2M

Capacity (lb): 4400

Lift (ft): 30

$2,519.10

CHAIN BLOCK, 3T, 10'LIFT

IR KM300-10-8

KM300-10-8 Manual Chain Hoist, 3 Ton Capacity, 10ft of Lift, 8ft Hand Chain Drop

1/4 - 20 metric ton Lifting Capacity. Ingersoll Rand Kinetic Series premium manual chain hoists are engineered for the harshest of environments and deliver exceptional durability to meet your toughest demands. With grade 100 Electro-galvanized chain, cast hook latches, all steel construction and extensive use of bearings these hoists are designed to LAST with minimal down time.

Product Application/Uses:

Ideal for the Rental and Construction markets

Features and Benefits:

All steel construction for exceptional durability and light weight
Reinforced double pawl brake with large diameter pawl springs for a highly dependable brake system
Full bearing construction on load sprockets and pinion shaft for reduced pull effort and longer life
Premium grade 100, Electro-Galvanized chain designed for exceptional corrosion resistance for increased durability.
Heavy duty cast hook latches designed for less latch replacements
CE certified; hoists meet or exceed regional requirements including ASME B30.16, HST-2M

Capacity (lb): 6600

Lift (ft): 10

$2,187.00

CHAIN BLOCK, 3T, 15'LIFT

IR KM300-15-13

KM300-15-13 Manual Chain Hoist, 3 Ton Capacity, 15ft of Lift, 13ft Hand Chain Drop

1/4 - 20 metric ton Lifting Capacity. Ingersoll Rand Kinetic Series premium manual chain hoists are engineered for the harshest of environments and deliver exceptional durability to meet your toughest demands. With grade 100 Electro-galvanized chain, cast hook latches, all steel construction and extensive use of bearings these hoists are designed to LAST with minimal down time.

Product Application/Uses:

Ideal for the Rental and Construction markets

Features and Benefits:

All steel construction for exceptional durability and light weight
Reinforced double pawl brake with large diameter pawl springs for a highly dependable brake system
Full bearing construction on load sprockets and pinion shaft for reduced pull effort and longer life
Premium grade 100, Electro-Galvanized chain designed for exceptional corrosion resistance for increased durability.
Heavy duty cast hook latches designed for less latch replacements
CE certified; hoists meet or exceed regional requirements including ASME B30.16, HST-2M

Capacity (lb): 6600

Lift (ft): 15

$2,381.40

CHAIN BLOCK, 3T, 20'LIFT

IR KM300-20-18

KM300-20-18 Manual Chain Hoist, 3 Ton Capacity, 20ft of Lift, 18ft Hand Chain Drop

1/4 - 20 metric ton Lifting Capacity. Ingersoll Rand Kinetic Series premium manual chain hoists are engineered for the harshest of environments and deliver exceptional durability to meet your toughest demands. With grade 100 Electro-galvanized chain, cast hook latches, all steel construction and extensive use of bearings these hoists are designed to LAST with minimal down time.

Product Application/Uses:

Ideal for the Rental and Construction markets

Features and Benefits:

All steel construction for exceptional durability and light weight
Reinforced double pawl brake with large diameter pawl springs for a highly dependable brake system
Full bearing construction on load sprockets and pinion shaft for reduced pull effort and longer life
Premium grade 100, Electro-Galvanized chain designed for exceptional corrosion resistance for increased durability.
Heavy duty cast hook latches designed for less latch replacements
CE certified; hoists meet or exceed regional requirements including ASME B30.16, HST-2M

Capacity (lb): 6600

Lift (ft): 20

$2,583.90

SPRING, SOCKET RETAINER

IR 2135-425

Socket Retainer Spring Replacement Part for Ingersoll Rand 2135 Series Impact Wrench

$8.00

POWER REGULATOR ASSEMBLY

IR 2135-D249A

Power Regulator Assembly for Ingersoll Rand 2135 Series Impact Wrench

For Use With

2135PQXPA
2135QXPA-2

$15.00

Inlet Bushing Assembly

IR 2135-D565A

Inlet Bushing Assembly

$31.00

HAMMER CASE ASSEMBLY

IR 2135-D727A

HAMMER CASE ASSEMBLY

$205.00

Trigger

IR 2135-D93

Trigger Assembly for Ingersoll Rand 2135 Series Impact Wrench

Includes: includes trigger, and O-ring

$11.00

Trigger

IR 2135-D93B

Trigger Assembly Replacement Part for Ingersoll Rand 2135 Series Impact Wrench

Product Application and Uses: For use with Ingersoll Rand 2135TIMAX Impact Wrench.

For Use With

2135PTIMAX

$15.00

INLET PARTS KIT

IR 2135-K303

Inlet Parts Kit for Ingersoll Rand 2135 Series Impact Wrench

Includes: Washer, O-ring Seal, Throttle Spring, Throttle Valve, Valve Seat, Seat Support, Retainer

For Use With

2135PTIMAX
2135PTIMAX-A
2135PQXPA
2135QXPA
2135QXPA-2

$29.00

1/2" IMPACT WRENCH

IR 2135PTIMAX

1/2" Air Impact Wrench, 1100 ft-lb Torque, Titanium Hammercase, Pin Retainer, Pistol

Powerful, durable and reliable, the 2135PTiMAX Series Impact Wrench will excel in any market.

Features And Benefits

Power: This wrench's high torque output and power regulator allow easy control over your tool.
Durability: With a composite housing and a hammer case made of titanium, this wrench can endure repeated drops and harsh environments.
Reliability: With twin hammer mechanism and powerful motor, the 2135PTiMAX is built not only for performance, but to last. Comes with a 1-year warranty.

Product Application and Uses: Designed to remove and install threaded fasteners for vehicle repair, general industrial, facility maintenance applications.
Actuation/Throttle Type/Switch Type: Trigger
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Average Air Consumption (cfm): 5
Average Air Consumption (l/min): 142
Blows per Min: 1250
Color: Grey
Configuration/Handle Type: Pistol Grip
Drive Size (in): 1/2
Drive Type: Square
Duty Rating: Maintenance Duty
End Plates: Aluminum with Hard-coating
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 109.2 / 120.2
Hammer Case: Titanium
Handle Material: Composite
Housing Material: Impact and chemical-resistant composite housing and patented steel reinforced frame
Impact Mechanism: Twin Hammer
Impacting Sound Pressure/Power Db(A): 99.8 / 110.8
Max Bolt Diameter (in): 9/16
Max Free Speed (rpm): 9800
Max Pressure (bar): 6.2
Max Torque (ft-lb): 780
Max Torque (in-lb): 9364
Max Torque (nm): 1058
Min Hose Size (in): 3/8
Motor: Reverse Bias
Number of Power Settings: 4
Nut-busting/Breakaway Torque (ft-lb): 1100
Nut-busting/Breakaway Torque (in-lb): 13196
Nut-busting/Breakaway Torque (nm): 1491
Power Source: Air Powered
Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 278.48
Product Length (in): 7.35
Product Width (in): 2.7
Product Height (in): 7.2
Product Weight (lb): 3.95
Recommended Forward Torque Range (ft-lb): 600
Recommended Forward Torque Range (in-lb): 7196
Recommended Forward Torque Range (nm): 813
Retainer Type: Pin Detent
Side to Center Distance (in): 1.37
Side to Center Distance (mm): 35
Special Features: Titanium Hammer case
Speed Setting: Variable Speed
Standards/Certifications: CE
Tool Type: Full-size
Vanes: 7
Vibration Level (m/s2): 13.3
Warranty: 1-year

Similar IR

2125PTIMAX
2135PTIMAX-A

$427.80

HOUSING ASSEMBLY

IR 2135PTIMAX-A40

HOUSING ASSEMBLY

$115.00

BUTTON KIT

IR 2135-K75

Button kit for Ingersoll Rand 2135 Series Impact Wrench

$14.00

Housing Assembly

IR 2135TIMAX-A40

Housing Assembly for Ingersoll Rand 2135 Series Impact Wrench

$102.00

HOUSING ASSEMBLY

IR 2135PTI-A40

HOUSING ASSEMBLY

$126.00

HAMMER KIT

IR 2135-THK1

Hammer Kit for Ingersoll Rand 2135 Series Impact Wrench

Includes: Hammer Case Gasket, (2) Hammers, (2) Hammer Pins, Anvil Assembly, Grease Kit
Product Application and Uses: For use with Ingersoll Rand 2135Timax and 2135QTimax Impact Wrenches.

For Use With

2135QXPA

$125.00

Tune-Up Kit

IR 2135-TK2

Tune-up Kit for Ingersoll Rand 2135 Series Impact Wrench

Includes: Socket Retainer, Gaskets, Inlet parts kit, Vane pack, O-Rings, Seals, Bearings, Grease kit

For Use With

2135PTIMAX
2135PTIMAX-A
2135PTIMAX-AP
2135QTL-2
2135QXPA
2135QXPA-2

$80.00

End Plate

IR 2141-11

End Plate for Ingersoll Rand 2141 and 2145 Series Impact Wrench

$73.00

GASKET

IR 2141-283

Gasket for Ingersoll Rand 2141 Series Impact Wrench

$15.00

GASKET

IR 2141-36

GASKET

$15.00

CYLINDER

IR 2141-3

Cylinder for Ingersoll Rand 2141 Series Impact Wrench

$137.00

INLET CLIP

IR 2141-57

Inlet Clip Replacement Partfor Ingersoll Rand 2141 Series, 2145 Series Impact Wrench

Product Application and Uses: For use with Ingersoll Rand 2145 Series Impact Wrench

$15.00

SCREW

IR 2141-638

Screw for Ingersoll Rand 2141 Series Impact Wrench

$15.00

ROTOR

IR 2141-53

ROTOR

$132.00

BUSHING

IR 2135-941

Bushing for Ingersoll Rand 2135 Series Impact Wrench

$23.00

HAMMER PIN

IR 2141-704

HAMMER PIN

$15.00

HAMMER

IR 2141-724

Hammer for Ingersoll Rand 2141 Series Impact Wrench

$74.00

VANE PACK

IR 2141-42-6

Vane Pack, Set of 6 for Ingersoll Rand 2141 Series Impact Wrench

$51.00

Valve Assembly Kit

IR 2141-A329

Valve Assembly Kit for Ingersoll Rand 2141 Series, 2145 Series, 2155 Series Impact Wrench

$30.00

END PLATE, FRONT

IR 2145-11

Front End Plate for Ingersoll Rand 2145 Series Impact Wrench

For Use With

2145QIMAX-3
2145QIMAX-6

$29.00

HOUSING ASSEMBLY

IR 2141-A40

HOUSING ASSEMBLY

$139.00

TRIGGER ASSEMBLY

IR 2141-A93

Trigger Assembly for Ingersoll Rand 2141, 2145 Series Impact Wrench

$15.00

WEAR PLATE

IR 2145-11X

Wear Plate for Ingersoll Rand 2145 Series Impact Wrench

Product Application and Uses: For use with Ingersoll Rand 2145QIMAX, 2145QIMAX-3, 2145QIMAX-6, and 2155QIMAX Impacts

For Use With

2145QIMAX
2145QIMAX-3
2145QIMAX-6
2155QIMAX

$22.00

ANVIL ASSEMBLY

IR 2141-A626

ANVIL ASSEMBLY

$184.00

Inlet Kit (-302, 6)

IR 2141-K303

Inlet Kit Replacement Part

Includes: O-ring Seal, Throttle Spring, Throttle Valve, Valve Seat, Seat Support, Retainer
Product Application and Uses: For Use with Ingersoll Rand 2145QiMAX and 2155QiMAX Series Impact Wrenches

For Use With

2145QIMAX-3
2145QIMAX-3-AP
2145QIMAX-6
2145QIMAX-6-AP
2145QIMAX-AP
2145QIMAX-SP
2155QIMAX

$31.00

HOUSING ASSEMBLY

IR 2145QIMAX-6-A40

HOUSING ASSEMBLY

$182.00

Cylinder Rotor Pressure Gauge Assembly

IR 2146-A3

Cylinder Rotor Pressure Gauge Assembly for Ingersoll Rand 2146 Series Impact Wrench

Includes: Ball Bearing Cylinder, Spacer, Cylinder, Rotor
Product Application and Uses: For use with Ingersoll Rand 2146Q1MAX, 2146Q1MAX-3, 2146Q1MAX-6 and 2146Q2MAX Impact Wrenches

For Use With

2146Q1MAX
2146Q1MAX-3
2146Q1MAX-6
2146Q2MAX

$188.00

3/4" AIR IMPACT WRENCH

IR 2146Q1MAX

3/4" Air Impact Wrench, Quiet, 2000 ft-lb Torque, Friction Ring-Thru-hole Retainer, Pistol

The 2146MAX Series Impact Wrenches- including the 2146Q1MAX, is the most powerful 3/4" impact in its class. Available in 1′′ (2146Q2MAX) drive or extended anvil pistol grip configurations, these tools have been engineered with an innovative pressure gauge that ensures optimized air flow and pressure. These quiet impact wrenches help you maximize productivity across a range of jobs and tackle anything that comes your way. And because you can avoid operating below and above the recommended 90 PSI air pressure, your tool will last longer and perform more reliably. Work more and spend less; the 2146MAX Series helps you do what you do best.

Features And Benefits

Cold-forged twin hammer impact mechanism and motor deliver 2,000 ft-lbs of Nut Busting Torque, durability, and efficiency
Steel hammer case stands up to drops and everyday abuse
Patented one-hand forward/reverse and feather-touch trigger provides maximum control
Ingersoll Rand’s Quiet Technology reduces the sound of the tool, sparing your ears without sacrificing a single ounce of power
Pressure gauge improves productivity and prolongs product life
A lightweight, balanced, air impact wrench that weighs just 7.8 lbs
Standard 3/4" drive size and length for access to confined bolt locations
Impact and chemical-resistant housing protects against repeated drops and exposure to shop fluids
Optimized for the vehicle repair industry, heavy trucks, tire lanes, fleet maintenance, body shops, general industrial use, MRO, rail, heavy machinery, oil and gas, shipbuilding and construction

Includes: Bare Tool
Product Application and Uses: Vehicle Repair, General Industrial, Facility Maintenance
Actuation/Throttle Type/Switch Type: Trigger
Air Consumption @ Load (cfm): 36
Air Consumption @ Load (l/min): 1090
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Average Air Consumption (cfm): 14
Average Air Consumption (l/min): 396
Blows per Min: 1075
Color: Grey
Configuration/Handle Type: Pistol Grip
Drive Size (in): 3/4
Drive Type: Square
Duty Rating: Maintenance Duty
End Plates: Steel
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 88.8 / 99.8
Hammer Case: Steel
Handle Material: Composite
Housing Material: Impact and chemical-resistant composite housing and patented steel reinforced frame
Impact Mechanism: Twin Hammer
Impacting Sound Pressure/Power Db(A): 94.3 /105.3
Max Bolt Diameter (in): 1
Max Free Speed (rpm): 5500
Max Pressure (bar): 6.2
Max Torque (ft-lb): 1453
Max Torque (in-lb): 17436
Max Torque (nm): 1970
Min Hose Size (in): 1/2
Motor: Reverse Bias
Number of Power Settings: 4
Nut-busting/Breakaway Torque (ft-lb): 2000
Nut-busting/Breakaway Torque (in-lb): 24003
Nut-busting/Breakaway Torque (nm): 2712
Power Source: Air Powered
Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 256.4
Product Length (in): 8.47
Product Width (in): 3.5
Product Height (in): 8.19
Product Weight (lb): 7.8
Quiet Tool: Yes
Recommended Forward Torque Range (ft-lb): 200-900
Recommended Forward Torque Range (in-lb): 2390-10798
Recommended Forward Torque Range (nm): 270-1220
Recommended Reverse Torque (ft-lb): 199-1003
Recommended Reverse Torque (nm): 270-1360
Retainer Type: Friction Ring and Thru-hole
Side to Center Distance (in): 1.73
Side to Center Distance (mm): 44
Special Features: Quiet, Air Pressure Gauge, Cold Forged Twin Hammers, Hard Anodized Wear Plates
Standards/Certifications: CE, UKCA, EAC
Vanes: 6
Vibration Level (m/s2): 8.4
Warranty: 2-year

Similar IR

2146Q2MAX
2146Q1MAX-3
2146Q1MAX-6
W8171-K2
2925RBP1TI

Supersedes

2145QI

$695.40

1" AIR IMPACT WRENCH

IR 2146Q2MAX

1" Air Impact Wrench, Quiet, 2000 ft-lb Torque, Friction Ring-Thru-hole Retainer, Pistol

The 2146MAX Series Impact Wrenches – including the 2146Q2MAX, is the most powerful 1′′ impact in its class. Available in ¾′′ (2146Q1MAX) drive and extended anvil pistol grip configurations, these tools have been engineered with an innovative pressure gauge that ensures optimized air flow and pressure. These quiet impact wrenches help you maximize productivity across a range of jobs and tackle anything that comes your way. And because you can avoid operating below and above the recommended 90 PSI air pressure, your tool will last longer and perform more reliably. Work more and spend less – the 2146MAX Series helps you do what you do best.

Features And Benefits

Cold-forged twin hammer impact mechanism and motor deliver 2,000 ft-lbs of Nut Busting Torque, durability, and efficiency
Steel hammer case stands up to drops and everyday abuse
Patented one-hand forward/reverse and feather-touch trigger provides maximum control
Ingersoll Rand’s Quiet Technology reduces the sound of the tool, sparing your ears without sacrificing a single ounce of power
Pressure gauge improves productivity and prolongs product life
A lightweight, balanced, air impact wrench that weighs just 8.0 lbs
1" Drive Square for larger socket sizes
Impact and chemical-resistant housing protects against repeated drops and exposure to shop fluids
Optimized for the vehicle repair industry, heavy trucks, tire lanes, fleet maintenance, body shops, general industrial use, MRO, rail, heavy machinery, oil and gas, shipbuilding and construction

Includes: Bare Tool
Product Application and Uses: Vehicle Repair, General Industrial, Facility Maintenance
Actuation/Throttle Type/Switch Type: Trigger
Air Consumption @ Load (cfm): 36
Air Consumption @ Load (l/min): 1090
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Average Air Consumption (cfm): 14
Average Air Consumption (l/min): 396
Blows per Min: 1075
Color: Grey
Configuration/Handle Type: Pistol Grip
Drive Size (in): 1
Drive Type: Square
Duty Rating: Maintenance Duty
End Plates: Steel
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 88.8 / 99.8
Hammer Case: Steel
Handle Material: Composite
Housing Material: Impact and chemical-resistant composite housing and patented steel reinforced frame
Impact Mechanism: Twin Hammer
Impacting Sound Pressure/Power Db(A): 94.3 /105.3
Max Bolt Diameter (in): 1
Max Free Speed (rpm): 5500
Max Pressure (bar): 6.2
Max Torque (ft-lb): 1453
Max Torque (in-lb): 17436
Max Torque (nm): 1970
Min Hose Size (in): 1/2
Motor: Reverse Bias
Number of Power Settings: 4
Nut-busting/Breakaway Torque (ft-lb): 2000
Nut-busting/Breakaway Torque (in-lb): 24003
Nut-busting/Breakaway Torque (nm): 2712
Power Source: Air Powered
Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 250
Product Length (in): 8.5
Product Width (in): 3.5
Product Height (in): 8.2
Product Weight (lb): 8
Quiet Tool: Yes
Recommended Forward Torque Range (ft-lb): 200-900
Recommended Forward Torque Range (in-lb): 2390-10798
Recommended Forward Torque Range (nm): 270-1220
Recommended Reverse Torque (ft-lb): 199-1003
Recommended Reverse Torque (nm): 270-1360
Retainer Type: Friction Ring and Thru-hole
Side to Center Distance (in): 1.73
Side to Center Distance (mm): 44
Special Features: Quiet, Air Pressure Gauge, Cold Forged Twin Hammers, Hard Anodized Wear Plates
Speed Setting: Variable Speed
Standards/Certifications: CE, UKCA, EAC
Vanes: 6
Vibration Level (m/s2): 8.4
Warranty: 2-year

Similar IR

2146Q1MAX
2146Q1MAX-3
2146Q1MAX-6
2925RBP1TI
W8191-K2
2175MAX

Supersedes

$837.90

Housing Assembly

IR 2145QIMAX-A40

Housing Assembly for Ingersoll Rand 2145QiMAX Impact Wrench

For Use With

2145QIMAX

$72.00

HAMMER CASE SCREW

IR 2146-638

HAMMER CASE SCREW

$15.00

TUNE UP KIT

IR 2146-TK2

Tune Up Kit for Ingersoll Rand 2146 Series Impact Wrench

Includes: Motor Gasket, O-Ring (Front-Black), O-Ring (Back-Red), (6) Vanes, (4) M4 Motor Screws, Hammer Case Gasket, O-Ring, Reverse Valve O-Ring (Black-Top), Reverse Valve O-Ring (Bottom-Blue), Inlet Parts Kit (O-Ring Seal, Throttle Spring, Throttle Valve, Valve Seat, Seat Support, Retainer)
Product Application and Uses: For use with Ingersoll Rand 2146Q1MAX, 2146Q1MAX-3, 2146Q1MAX-6 and 2146Q2MAX Impact Wrenches

For Use With

2146Q1MAX
2146Q1MAX-3
2146Q1MAX-6
2146Q2MAX

$141.00

Anvil Assembly

IR 2145-A626

Anvil Assembly for Ingersoll Rand 2145TIMAX Impact Wrench

Product Application and Uses: For use with Ingersoll Rand 2145QIMAX Standard Anvil

For Use With

2145QIMAX-AP
2146Q1MAX

$202.00

BUTTON KIT

IR 2145-K75RD

Button Kit for Ingersoll Rand 2145, 2155 Series Impact Wrench

Includes: Forward, Reverse Buttons
Product Application and Uses: For use with 2145 and 2155 Series Impact Wrench

For Use With

2145QIMAX-3
2145QIMAX-6
2155QIMAX

$32.00

Hammer Kit

IR 2145-THK2

Hammer Mechanism Replacement Part for Ingersoll Rand 2145 and 2155 Series Impact Wrench

Includes: (2) Hammer, Hammer Frame, (2) Hammer pins
Product Application and Uses: For use with Ingersoll Rand 2145 and 2155 Series Impact Wrench

For Use With

2145QIMAX-3
2145QIMAX-3-AP
2145QIMAX-6
2145QIMAX-6-AP
2145QIMAX-AP
2145QIMAX-SP
2155QIMAX

$295.00

Button Kit

IR 2146-K75

Button Kit for Ingersoll Rand 2146 Series Impact Wrench

Includes: Forward and Reverse Buttons
Product Application and Uses: For use with Ingersoll Rand 2146Q1MAX, 2146Q1MAX-3, 2146Q1MAX-6 and 2146Q2MAX Impact Wrenches

For Use With

2146Q1MAX
2146Q1MAX-3
2146Q1MAX-6
2146Q2MAX

$32.00

KIT, SOCKET RETAINER

IR 2155-K425

Socket Retainer Kit for Ingersoll Rand W8000 Series Impact Wrench

Includes: Socket Retainer Spring and O-Ring
Product Application and Uses: For use with Ingersoll Rand W8000 Series Air Impact Wrenches.

For Use With

W8171
W8171-K2
W8191
W8191-K2
W8571
W8571-K2
W8591
W8591-K2

$15.00

Hammer Case Assembly

IR 2145-D727

Hammer Case Assembly for Ingersoll Rand 2145, 2155 Series Impact Wrench

Product Application and Uses: For use with Ingersoll Rand 2145, 2155 Series Impact Wrench

For Use With

2145QIMAX-3
2145QIMAX-6
2155QIMAX

$66.00

Vane Pack

IR 2145-42-7

Vane Pack for Ingersoll Rand 2145 Series Impact Wrench, 7-Pack

Includes: (7) vanes
Product Application and Uses: For use with Ingersoll Rand 2145 Series Impact Wrench

For Use With

2145QIMAX-3
2145QIMAX-6

$15.00

LABEL, TOOL

IR 2145QIMAX-300

LABEL, TOOL

$15.00

Tune-Up Kit

IR 2145-TK2

Tune-up Kit for Ingersoll Rand 2145 Series Impact Wrench

For Use With

2145QIMAX-AP
2155QIMAX

$136.00

Vane Pack (Set of 6)

IR 2146-42-6

Vane Pack (Set of 6)

$46.00

GASKET, HAMMER, CASE

IR 2145-36RD

Hammer Case Gasket for Ingersoll Rand 2145 Series Impact Wrench

For Use With

2145QIMAX-3
2145QIMAX-6

$15.00

3/4" IMPACTOOL

IR 2145QIMAX

3/4" IMPACTOOL

$681.15

Rotor

IR 2145-53

Rotor for Ingersoll Rand 2145 Series Impact Wrench

For Use With

2145QIMAX-3
2145QIMAX-6

$83.00

End Plate

IR 2146-A11

End Plate for Ingersoll Rand 2146 Series Impact Wrench

Includes: Front Endplate, Bearing
Product Application and Uses: For use with Ingersoll Rand 2146Q1MAX, 2146Q1MAX-3, 2146Q1MAX-6 and 2146Q2MAX Impact Wrenches

For Use With

2146Q1MAX
2146Q1MAX-3
2146Q1MAX-6
2146Q2MAX

$30.00

3/4" X 3 AIR IMPACT WRENCH

IR 2146Q1MAX-3

3/4" Air Impact Wrench, 3" Ext Anvil, Quiet, 2,000 ft-lb Torque, Friction Ring-Thru-hole Retainer, Pistol

The 2146MAX Series Impact Wrenches- including the 2146Q1MAX-3, is the most powerful 3/4" impact in its class. These tools have been engineered with an innovative pressure gauge that ensures optimized air flow and pressure. These quiet impact wrenches help you maximize productivity across a range of jobs and tackle anything that comes your way. And because you can avoid operating below and above the recommended 90 PSI air pressure, your tool will last longer and perform more reliably. Work more and spend less; the 2146MAX Series helps you do what you do best.

Features And Benefits

Cold-forged twin hammer impact mechanism and motor deliver 2,000 ft-lbs of Nut Busting Torque, durability, and efficiency
Steel hammer case stands up to drops and everyday abuse
Patented one-hand forward/reverse and feather-touch trigger provides maximum control
Ingersoll Rand’s Quiet Technology reduces the sound of the tool, sparing your ears without sacrificing a single ounce of power
Pressure gauge improves productivity and prolongs product life
A lightweight, balanced, air impact wrench that weighs just 8.8 lbs
Extended reach 3" anvil provides better accessibility to bolts
Impact and chemical-resistant housing protects against repeated drops and exposure to shop fluids
Optimized for the vehicle repair industry, heavy trucks, tire lanes, fleet maintenance, body shops, general industrial use, MRO, rail, heavy machinery, oil and gas, shipbuilding and construction

Includes: Bare Tool
Product Application and Uses: Vehicle Repair, General Industrial, Facility Maintenance
Actuation/Throttle Type/Switch Type: Trigger
Air Consumption @ Load (cfm): 36
Air Consumption @ Load (l/min): 1090
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Anvil Length: 3" Extended
Average Air Consumption (cfm): 14
Average Air Consumption (l/min): 396
Blows per Min: 1075
Color: Grey
Configuration/Handle Type: Pistol Grip
Drive Size (in): 3/4
Drive Type: Square
Duty Rating: Maintenance Duty
End Plates: Steel
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 88.8 / 99.8
Hammer Case: Steel
Handle Material: Composite
Housing Material: Impact and chemical-resistant composite housing and patented steel reinforced frame
Impact Mechanism: Twin Hammer
Impacting Sound Pressure/Power Db(A): 94.3 /105.3
Max Bolt Diameter (in): 1
Max Free Speed (rpm): 5500
Max Pressure (bar): 6.2
Max Torque (ft-lb): 1453
Max Torque (in-lb): 17436
Max Torque (nm): 1970
Min Hose Size (in): 1/2
Motor: Reverse Bias
Number of Power Settings: 4
Nut-busting/Breakaway Torque (ft-lb): 2000
Nut-busting/Breakaway Torque (in-lb): 24003
Nut-busting/Breakaway Torque (nm): 2712
Power Source: Air Powered
Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 227.3
Product Length (in): 11.5
Product Width (in): 3.5
Product Height (in): 8.2
Product Weight (lb): 8.8
Quiet Tool: Yes
Recommended Forward Torque Range (ft-lb): 200-900
Recommended Forward Torque Range (in-lb): 2390-10798
Recommended Forward Torque Range (nm): 270-1220
Recommended Reverse Torque (ft-lb): 199-1003
Recommended Reverse Torque (nm): 270-1360
Retainer Type: Friction Ring and Thru-hole
Side to Center Distance (in): 1.73
Side to Center Distance (mm): 44
Special Features: Quiet, Air Pressure Gauge, Cold Forged Twin Hammers, Hard Anodized Wear Plates
Standards/Certifications: CE, UKCA, EAC
Vanes: 6
Vibration Level (m/s2): 8.4
Warranty: 2-year

Similar IR

2146Q1MAX
2146Q1MAX-6
2146Q2MAX

Supersedes

2145QIMAX-3

$860.70

CYLINDER

IR 2146-K3

Cylinder for Ingersoll Rand 2146 Series Impact Wrench

Product Application and Uses: For use with Ingersoll Rand 2146Q1MAX, 2146Q1MAX-3, 2146Q1MAX-6 and 2146Q2MAX Impact Wrenches

For Use With

2146Q1MAX
2146Q1MAX-3
2146Q1MAX-6
2146Q2MAX

$91.00

Inlet Bushing Assembly

IR 2145-D565

Inlet Bushing Assembly for Ingersoll Rand 2145 Series Impact Wrench

Includes: Inlet bushing, Inlet Pre-screen, Inlet Clip, Inlet Parts Kit
Product Application and Uses: For use with Ingersoll Rand 2145 Series Impact Wrench

For Use With

2145QIMAX-3
2145QIMAX-6

$79.00

Trigger Assembly

IR 2145-D93BK

Trigger Assembly for Ingersoll Rand 2145, 2155 Series Impact Wrench

Includes: Trigger, O-ring
Product Application and Uses: For use with 2145 and 2155 Series Impact Wrench

For Use With

2145QIMAX-3
2145QIMAX-6
2155QIMAX

$15.00

3/4" X 6 AIR IMPACT WRENCH

IR 2146Q1MAX-6

3/4" Air Impact Wrench, 6" Ext Anvil, Quiet, 2,000 ft-lb Torque, Friction Ring-Thru-hole Retainer, Pistol

The 2146MAX Series Impact Wrenches- including the 2146Q1MAX-6, is the most powerful 3/4" impact in its class. These tools have been engineered with an innovative pressure gauge that ensures optimized air flow and pressure. These quiet impact wrenches help you maximize productivity across a range of jobs and tackle anything that comes your way. And because you can avoid operating below and above the recommended 90 PSI air pressure, your tool will last longer and perform more reliably. Work more and spend less; the 2146MAX Series helps you do what you do best.

Features And Benefits

Cold-forged twin hammer impact mechanism and motor deliver 2,000 ft-lbs of Nut Busting Torque, durability, and efficiency
Steel hammer case stands up to drops and everyday abuse
Patented one-hand forward/reverse and feather-touch trigger provides maximum control
Ingersoll Rand’s Quiet Technology reduces the sound of the tool, sparing your ears without sacrificing a single ounce of power
Pressure gauge improves productivity and prolongs product life
A lightweight, balanced, air impact wrench that weighs just 10.1 lbs
Long reach 6" extended anvil for improved access to bolts
Impact and chemical-resistant housing protects against repeated drops and exposure to shop fluids
Optimized for the vehicle repair industry, heavy trucks, tire lanes, fleet maintenance, body shops, general industrial use, MRO, rail, heavy machinery, oil and gas, shipbuilding and construction

Includes: Bare Tool
Product Application and Uses: Vehicle Repair, General Industrial, Facility Maintenance
Actuation/Throttle Type/Switch Type: Trigger
Air Consumption @ Load (cfm): 36
Air Consumption @ Load (l/min): 1090
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Anvil Length: 6" Extended
Average Air Consumption (cfm): 14
Average Air Consumption (l/min): 396
Blows per Min: 1075
Color: Grey
Configuration/Handle Type: Pistol Grip
Drive Size (in): 3/4
Drive Type: Square
Duty Rating: Maintenance Duty
End Plates: Steel
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 88.8 / 99.8
Hammer Case: Steel
Handle Material: Composite
Housing Material: Impact and chemical-resistant composite housing and patented steel reinforced frame
Impact Mechanism: Twin Hammer
Impacting Sound Pressure/Power Db(A): 94.3 /105.3
Max Bolt Diameter (in): 1
Max Free Speed (rpm): 5500
Max Pressure (bar): 6.2
Max Torque (ft-lb): 1453
Max Torque (in-lb): 17436
Max Torque (nm): 1970
Min Hose Size (in): 1/2
Motor: Reverse Bias
Number of Power Settings: 4
Nut-busting/Breakaway Torque (ft-lb): 2000
Nut-busting/Breakaway Torque (in-lb): 24003
Nut-busting/Breakaway Torque (nm): 2712
Power Source: Air Powered
Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 198
Product Length (in): 14.5
Product Width (in): 3.5
Product Height (in): 8.2
Product Weight (lb): 10.1
Quiet Tool: Yes
Recommended Forward Torque Range (ft-lb): 200-900
Recommended Forward Torque Range (in-lb): 2390-10798
Recommended Forward Torque Range (nm): 270-1220
Recommended Reverse Torque (ft-lb): 199-1003
Recommended Reverse Torque (nm): 270-1360
Retainer Type: Friction Ring and Thru-hole
Side to Center Distance (in): 1.73
Side to Center Distance (mm): 44
Special Features: Quiet, Air Pressure Gauge, Cold Forged Twin Hammers, Hard Anodized Wear Plates
Standards/Certifications: CE, UKCA, EAC
Vanes: 6
Vibration Level (m/s2): 8.4
Warranty: 2-year

Similar IR

2146Q1MAX-3
2146Q1MAX
2146Q2MAX

Supersedes

2145QIMAX-6

$883.50

END PLATE

IR 2161-11

END PLATE

$126.00

END PLATE

IR 2161-12

END PLATE

$126.00

WASHER

IR 2161-207

Motor Clamp Washer Service Part for Ingersoll Rand Power Tools

$15.00

GASKET

IR 2161-36

Hammer Case Gasket for Ingersoll Rand 2161, 2171 Series Impact Wrench

For Use With

2161P
2161XP
2161XP-6
2171P
2171XP

$15.00

HANGER

IR 2161-366

Vertical Hanger Kit Service Part for Ingersoll Rand Impact Wrench

For Use With

2161P
2925P1TI

$380.00

BOLT

IR 2161-638

BOLT

$15.00

GASKET

IR 2161-739

Backcap Gasket for Ingersoll Rand 2161 and 2171 Series Impact Wrench

For Use With

2161P
2161XP
2161XP-6
2171P
2171XP

$15.00

Inlet Bushing Assembly

IR 2161-A465A

Inlet Bushing Assembly

$32.00

TRIGGER

IR 2161-A93

TRIGGER

$56.00

TUNE-UP KIT

IR 2161-TK2

Tune-up Kit for Ingersoll Rand 2161 Series Impact Wrench

For Use With

2161P
2161XP
2161XP-6
2171P
2171XP

$146.00

ANVIL

IR 2161XP-626

3/4" Drive Anvil for 2161XP Air Impact Wrench

For Use With

2161XP

$200.00

ROTOR

IR 216B-53

ROTOR

$71.00

Impact Wrench

IR 216B

3/8" Air Impact Wrench, 200 ft-lb Torque, Friction Ring Retainer, Inline

Full of power with an easy to access design, the 216B Straight Impact Wrench ensures every job is a job well done.

Features And Benefits

Durable: Combining an aluminum hammer case with metal housing ensures this wrench is both durable and lightweight.
Power: The ball and cam mechanism delivers a high output of power without ever risking your tool stalling out.
Access: Thanks to its straight grip and overall design, this impact wrench is great for use in hard-to-reach spaces.

Includes: Bare Tool
Product Application and Uses: Vehicle Repair, General Industrial, Facility Maintenance
Actuation/Throttle Type/Switch Type: Butteryfly Trigger
Air Consumption @ Load (cfm): 19
Air Consumption @ Load (l/min): 538
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Average Air Consumption (cfm): 3
Average Air Consumption (l/min): 85
Blows per Min: 1600
Color: Silver
Configuration/Handle Type: Straight
Drive Size (in): 3/8
Drive Type: Square
Duty Rating: General Duty
End Plates: Steel
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 94.8 / 105.8
Hammer Case: Aluminum
Handle Material: Aluminum
Housing Material: Aluminum
Impact Mechanism: Pin Clutch
Impacting Sound Pressure/Power Db(A): 90.0 / 101.0
Max Bolt Diameter (in): 7/16
Max Free Speed (rpm): 8500
Max Pressure (bar): 6.2
Max Torque (ft-lb): 200
Max Torque (in-lb): 2400
Max Torque (nm): 271
Min Hose Size (in): 3/8
Motor: Non-Biased
Power Source: Air Powered
Product Length (in): 7.7
Product Width (in): 2.3
Product Height (in): 1.9
Product Weight (lb): 2.8
Recommended Forward Torque Range (ft-lb): 15-160
Recommended Forward Torque Range (in-lb): 177-1921
Recommended Forward Torque Range (nm): 20-217
Retainer Type: Friction Ring
Side to Center Distance (in): 1.2
Side to Center Distance (mm): 30
Standards/Certifications: Iso 11148-6, Cagi B186, Iso 28927-2, Iso 15744
Tool Type: Full-size
Vanes: 6
Vibration Level (m/s2): 5.2
Warranty: 1-year

Similar IR

211

$265.05

ASSEMBLY, FRONT END PLATE

IR 216B-A11

ASSEMBLY, FRONT END PLATE

$26.00

PIN, HAMMER

IR 216B-704

PIN, HAMMER

$15.00

GUIDE, SPINDLE

IR 216B-630

GUIDE, SPINDLE

$19.00

HAMMER CAM

IR 216B-721

HAMMER CAM

$74.00

ASSEMBLY, ANVIL

IR 216B-A626

Anvil Assembly Replacement Part For Ingersoll Rand 216B Series Air Impact Wrench

For Use With

216B

$126.00

ASSEMBLY, SWIVEL INLET BODY

IR 216B-A165

ASSEMBLY, SWIVEL INLET BODY

$24.00

Auxiliary Handle Kit

IR 2175-K48

Auxiliary Handle Kit

$52.00

HANDLE ASSEMBLY

IR 2190-A92

HANDLE ASSEMBLY

$620.00

SPRING, HAMMER

IR 216B-728

SPRING, HAMMER

$15.00

GASKET, REAR

IR 2175-283

GASKET, REAR

$15.00

SOCKET RETAINER KIT

IR 2190-SRK1

SOCKET RETAINER KIT

$20.00

INLET PARTS KIT

IR 2190-K303

INLET PARTS KIT

$88.00

TUNE-UP KIT 2190-TK1

IR 2190-TK1

Tune-up Kit for Ingersoll Rand 2190 Series Impact Wrench

Includes: (1) Vane pack, (1) Spring, (1) Front Rotor Bearing, (1) Rear Rotor Bearing, (2) Gasket, (2) O-Ring, (2) Snap Ring, (1) Spring pack

$121.00

HOSE, 3/4" X 50, 300 PSI

IR 22040679

HOSE, 3/4" X 50, 300 PSI

$375.00

IMPACTOOL

IR 2171P

1" Air Impact Wrench, 1250 ft-lb Torque, Pin Retainer, Pistol

The metal housing and steel hammer case of the 2171 Series Impact Wrench makes this one of the toughest tools on the market. You’ll also benefit from the twin hammer impact mechanism, which provides a more even impact with every blow and makes it less sensitive to changes in air pressure.

Features And Benefits

Durability: This heavy-duty impact wrench is tough enough to handle harsh environments and repeated drops.
Versatility: The 2171 Series is an ideal impact wrench for use in multiple markets, from vehicle repair and heavy machinery to general industrial and facility maintenance.
Increased Safety: The square pin drive of the 2171 Series provides the strongest connection to the socket to increase safety, especially when doing overhead work.

Product Application and Uses: Ideal impact wrench for use in multiple markets, from vehicle repair and heavy machinery to general industrial and facility maintenance.
Actuation/Throttle Type/Switch Type: Trigger
Air Consumption @ Load (cfm): 46
Air Consumption @ Load (l/min): 1303
Air Inlet: 3/8" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Average Air Consumption (cfm): 55
Average Air Consumption (l/min): 1558
Blows per Min: 1025
Color: Grey
Configuration/Handle Type: Pistol Grip
Drive Size (in): 1
Drive Type: Square
Duty Rating: Maintenance Duty
End Plates: Steel
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 97.7 / 108.7
Hammer Case: Steel
Handle Material: Composite
Housing Material: Aluminum core with composite sleeve
Impact Mechanism: Twin Hammer
Impacting Sound Pressure/Power Db(A): 95.3 / 106.3
Max Bolt Diameter (in): 1
Max Free Speed (rpm): 6000
Max Pressure (bar): 6.2
Max Torque (ft-lb): 1250
Max Torque (in-lb): 15002
Max Torque (nm): 1695
Min Hose Size (in): 1/2
Motor: Reverse Bias
Number of Power Settings: 3
Power Source: Air Powered
Product Length (in): 8.5
Product Width (in): 3.5
Product Height (in): 9.5
Product Weight (lb): 12.32
Recommended Forward Torque Range (ft-lb): 300-1000
Recommended Forward Torque Range (in-lb): 3602-12002
Recommended Forward Torque Range (nm): 407-1356
Retainer Type: Pin Detent
Side to Center Distance (in): 1.75
Side to Center Distance (mm): 44
Speed Setting: Variable Speed
Standards/Certifications: CE
Tool Type: Full-size
Vanes: 6
Vibration Level (m/s2): 11.5
Warranty: 1-year

Similar IR

2161P
2171XP

$1,345.50