GRACO INC. S10595

GG 235457

GG 235271

GG 235073

HOSE, COUPLED

Graco 235073 Grounded Air Hose with stainless steel braid ground path, Red, 75 ft (23 m)

GG 235042

GG 235419

GG 235468

GG 235462

GUN, SILVER, FINE FINISH

Graco 235462 Silver Plus Airless Spray Gun, 2 Finger Trigger, Fine Finish Flat Tip

The Silver Plus Gun is known for its durability, long life, spraying performance and comfortable design. Rated at 5000 psi (345 bar, 34.5 MPa), this is the preferred gun for high-pressure applications. Includes a 2-finger trigger and a Fine Finish Flat Tip Guard.

• Rugged Design
  • Durable forged aluminum withstands harsh work environments
  • Lighter weight than competitive guns Polished body is easy to clean
• Exclusive Needle Design
  • Factory set needle needs no trigger adjustments
  • Guaranteed for life against breakage
  • Maximum performance and long life
• Stainless Steel Fluid Tube
  • Fluid flows directly to the tip through the gun fluid tube
  • Provides the ability to spray heavier materials
  • Including high solid coatings and mastics

• Model: Silver Plus

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Body Material: Aluminum

• Component A Inlet Size (cm): 0.635

• Component A Inlet Size (in): 1/4
• Component A Inlet Size (mm): 6.35
• Component A Inlet Thread Type: NPSM
• Component Type: Single Component

• Fluid Orifice Size (cm): 0.094
• Fluid Orifice Size (in): 0.037
• Fluid Orifice Size (mm): 0.94

• For Use With: High Pressure Application

• Gun Activation: Manual
• Gun Type: Airless Gun

• Includes: Fine Finish Flat Tip Guard

• Maximum Fluid Pressure (bar): 345
• Maximum Fluid Pressure (kPa): 34500
• Maximum Fluid Pressure (MPa): 34.5
• Maximum Fluid Pressure (psi): 5000
• Maximum Fluid Temperature (°C): 50
• Maximum Fluid Temperature (°F): 120

• Maximum Fluid Pressure (bar): 345
• Maximum Fluid Pressure (kPa): 34500
• Maximum Fluid Pressure (MPa): 34.5
• Maximum Fluid Pressure (psi): 5000
• Maximum Fluid Temperature (°C): 50
• Maximum Fluid Temperature (°F): 120

• Purge Method: Liquid

GG 235483

GG 235534

AGITATOR, HELIX

Graco 235534 Twistork Drum Agitator, reversible, non-siphon, air driven, 1-1/2 HP, 37.25 in (95 cm) in length, 304 stainless steel material

• Helix blade effectively mixes higher viscosity materials
• Mounts directly to 2-inch drum bung
• Comes in stainless steel or carbon steel
• Sealed agitator drive prevents material contamination and evaporation
• Approved by ATEX for use in hazardous locations
• Maximum viscosity is 10,000 cps

• Model: Twistork

• Air Inlet Size (cm): 0.3175
• Air Inlet Size (in): 1/8
• Air Inlet Size (mm): 3.175
• Air Inlet Thread Type: NPT

• For Use With: 55 Gallon (208 Liter) Drum

• Maximum Speed (RPM): 800

• Maximum Viscosity (cP): 10000

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (kPa): 700
• Maximum Working Pressure (psi): 100

• Motor Type: Pneumatic - Rotary Vane

• Power Rating (HP): 1.5

GG 235486

KIT, NOZZLE, SPRAY, ANGLE 180

Graco 235486 180 Degree Easy Turn Directional Spray Adapter

Attach to a Graco extension to spray at a variety of angles.

• Model: Graco

• Inlet Size (cm): 2.2225
• Inlet Size (in): 7/8-14
• Inlet Size (mm): 22.225

• Maximum Working Pressure (bar): 248
• Maximum Working Pressure (kPa): 24800
• Maximum Working Pressure (MPa): 24.8
• Maximum Working Pressure (psi): 3600

• Outlet Size (cm): 2.2225
• Outlet Size (in): 7/8-14
• Outlet Size (mm): 22.225
• Outlet Thread Type: UNC

• Overall Height (cm): 4.445
• Overall Height (in): 1.75
• Overall Height (mm): 44.45
• Overall Length (cm): 2.54
• Overall Length (in): 1
• Overall Length (mm): 25.4

GG 235627

ULTRA-LITE 4000 GUN, FLOW

Graco 235627 Ultra-Lite 4000 Flow Gun

The operator-friendly Ultra-Lite 4000 combines ergonomic design with high-operating pressure for dispensing low-to-medium viscosity industrial and automotive sealants and adhesives.

• Operating pressures to 4000 psi (276 bar, 27.6 MPa).
• 150° head/handle angle is more comfortable for operator
• Changeable tips for a variety of dispensing needs

• Model: Ultra-Lite
• Series: 4000

• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation

• Connection Type: Threaded, Flange

• Gun Activation: Manual

• Inlet Size (in): 1/4

• Inlet Thread Gender: Female
• Inlet Thread Type: NPT

• Maximum Working Pressure (bar): 280
• Maximum Working Pressure (kg/cm²): 281
• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (MPa): 28
• Maximum Working Pressure (psi): 4000

• Number of Outputs: 1

GG 235634

GG 235658

KIT, REPAIR

KIT INCLUDES: NUT [QTY. 1], SEAL, BLOCK VEE, .375 ODX.125 ID [QTY. 1], PACKING, O-RING [QTY. 1], STEM, VALVE [QTY. 1], NUT, SEAT [QTY. 1], RING, RETAINING [QTY. 2], ROD, [QTY. 1]

GG 235838

CUP,WET

GG 249588

REACTOR HEATED HOSE, 50', 3/8, W/O CBL, 3500P

Graco 249588 50 ft x 3/8 in Heated Hose, 3500 psi, Without Cable, No Scuff, Reactor 1 & 2

Graco's heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

• New multi-strand copper heating element has greatly increased hose quality:

  Provides 10-times* the flex life compared to previous flat copper heating element

  Long-term, even heating without hot spots

  Backwards compatible with existing Reactor heated hoses

  • Copper-heated hoses are designed specifically for use with Graco proportioners
  • Covered with proprietary butyl cover for protection against moisture sensitive isocyanate
  • Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together
  • Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings
  • Helix-design whip hose uses braided copper wires for added flexibility and longer life

  
  

  • Model: Reactor 1
  • Series: No Scuff
  • Compatible Sprayer: Reactor 1 & 2
  • For Use With: Plural Component Proportioners
  • Hose Heating Type: External Heated
  • Hose Inside Diameter (in): 3/8
  • Hose Inside Diameter (mm): 9.525
  • Hose Length (ft): 50
  • Hose Length (m): 15.2
  • Inside Diameter (in): 3/8
  • Maximum Working Pressure (bar): 241
  • Maximum Working Pressure (kPa): 24100
  • Maximum Working Pressure (MPa): 24.1
  • Maximum Working Pressure (psi): 3500

GG 249810

GG 249512

THERM-O-FLOW GUN,HOTMELT,BOTTOM W/SWITCH

Graco 249512 Precision Hot Melt Dispense Gun with Switch

Perfect for high pressure, high flow sealant and adhesive applications, Therm-O-Flow Guns are available with electric switches so they can be used in conjunction with automated equipment.

Application:

For applying hot melt materials.

• Provides accurate dispense control for Therm-O-Flow Systems

  • Provides precise proportional control and variable dispense volume with unique tapered needle valve design
  • Dual heaters offer rapid warm-up during initial start-up and maintain uniform temperature control
  • Rugged construction – durable, lightweight anodized aluminum body
  • Ergonomic, easy-trigger actuation
  • Designed for easy service – minimal maintenance and downtime
  • Rated for high-pressure Therm-O-Flow Systems up to 3500 psi (24.1 MPa, 241 bar)

• Precise temperature control from PID control panel

• Piston-actuated ball and seat design for positive shut off

  Light trigger pull

• Rugged all metal construction

• Model: Therm-O-Flow

GG 249764

GG 249855

GG 249598

GG 249572

REACTOR E-10 PROPORTIONER, CMPLT, 240V, 1X16A, HTD

Graco 249572 Reactor E-10 Heated Proportioner with 20 A Circuit, 240 V

Gracos Reactor E-10 is a small, ready-to-use system that helps you get in and get smaller jobs done fast without sacrificing performance. The Reactor E-10 sprayers are ideal for plural-component spray, joint-fill jobs and touch-ups. With smart controls that are easy to setup and simple to operate, the E-10 is a natural complement to any proportioning equipment line-up.

• Small size
  

  Ideal for on-site portability and hard-to-reach areas

• Cost Savings
  

  One-person operation saves time and money

• Extent your spray business
  

  Use as an add-on to your existing spray business

• Material savings
  

  Saves 30% on material costs compared to disposable foam systems

• Electric power
  

  Low draw and plugs into standard outlets

• Single Knob Operation
  

  Intuitive start, stop and digital temperature display with single knob operation

• Easily balancing
  

  Pressure balance valves give you quick and easy balancing of system pressures

  Balanced proportioning eliminates pressure fluctuations to give you a consistent spray pattern

• Easy-to-service fluid section
  

  Reduces maintenance and increases productivity

• Electric motor
  

  Improves performance and reduces operating costs

• Spray on-ratio
  

  Self-contained translucent material tanks show you that you are spraying on-ratio

• Pre-heat material
  

  Heaters and hose give you up to 2000 watts to pre-heat circulating material

• Model: Reactor
• Series: E-10

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35

• Air Outlet Size (cm): 0.635
• Air Outlet Size (in): 1/4
• Air Outlet Size (mm): 6.35
• Air Outlet Thread Type: NPSM

• Amperage (A): 20
• Application: Spray Foam
• Applicator Type: Manual

• Compatible Material: Plural Components

• Component Type: Two Component

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Type: No Gun

• Hose Package: No Hose

• Material Application: Polyurethane Foam

• Maximum Flow Rate (kg/min): 5.44
• Maximum Flow Rate (lb/min): 12

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160

• Maximum Hose Length (ft): 35
• Maximum Hose Length (m): 94.5

• Maximum Mix Ratio: 1:1

• Maximum Working Pressure (bar): 138
• Maximum Working Pressure (kPa): 13800
• Maximum Working Pressure (MPa): 13.8
• Maximum Working Pressure (psi): 2000

• Overall Depth (cm): 76.2
• Overall Depth (in): 30
• Overall Depth (mm): 762

• Overall Height (cm): 111.8
• Overall Height (in): 44
• Overall Height (mm): 1118
• Overall Width (cm): 67.3
• Overall Width (in): 26.5
• Overall Width (mm): 673

• Power Rating (HP): 5.10
• Power Rating (

GG 249592

GG 249877

DIFFUSER, ASSY,RAC

Graco 249877 Diffuser Assembly for Flat Tip to RAC Tip Air Cap Conversion Kit

• Compatible Material: Sealants, Adhesives

GG 24A219

CHANNEL, MOUNTING, DUAL ARM 1 REEL

Graco 24A219 XD Series Open Reel Mounting Channel - Accommodates 1 Reel

• Number of Pieces: 9

GG 249526

FUSION AP GUN, AF5252 FTM979

Graco 249526 Round Fusion Air-Purge Stud Wall Gun with 0.070 Mix Chamber

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

• Easy air-blast tip cleaning reduces build-up and tip clogging.
• Long-lasting side seals means less downtime for maintenance
• Quick-release fluid housing - lets you easily change the mix chambers without tools
• Ergonomic handle

• Model: Fusion AP
• Series: Specialty

• Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam

• Fluid Orifice Size (cm): 0.132
• Fluid Orifice Size (in): 0.052
• Fluid Orifice Size (mm): 1.32

• Gun Type: Air Purge Gun

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate @ PSI (lb/min): 50

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500

• Minimum Air Inlet Pressure (bar): 5.5
• Minimum Air Inlet Pressure (kPa): 550
• Minimum Air Inlet Pressure (MPa): 0.55
• Minimum Air Inlet Pressure (psi): 80

• Mix Chamber: 04 (.070)

• Pattern Size (in): 22 in @ 24 in from target

GG 249992

CHECK-MATE PUMP,RECIP,DISPL (18 SST)

Graco 249992 Stainless Steel 18 cm Displacement Pump

• Model: Check-Mate

• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

GG 24A225

GG 24A217

KIT, ACCESSORY

Graco 24A217 SD 10 Oil Reel Enclosure - White

• Number of Pieces: 22

GG 24A251

KIT, REPAIR, VEE, 25CC

Graco 24A251 Standard Seal Repair Kit for Merkur LW025A

GG 24A252

KIT, REPAIR,VEE, 50CC

Graco 24A252 Standard Seal Repair Kit for Merkur LW050A

GG 24A220

CHANNEL, MOUNTING, DUAL ARM 2 REEL

Graco 24A220 Open Reel Mounting Channel (Accommodates 2 Reels)

• Number of Pieces: 17

GG 24A085

APPLICATOR,L-RIM:10/14,MIXHEAD,W/CALIB

GG 249617

GH SPRAYER, 833, COMPLETE

Graco 249617 GH 833 Gas Hydraulic Sprayer, Complete

The GH 833 is the preferred choice for high production professional contractors who spray the wide range of materials. This jobsite-proven workhorse is the answer when you demand ruggedness, performance and value.

• Honda Engine

  390 cc (13 HP) engine with integrated fuel tank to deliver maximum performance

  Contractor preferred engine with Oil Alert

• Heavy-Duty Hydraulic System

  Faster, more responsive changeover

  O-ring sealed to eliminate leaks

  High-precision pressure control

  No hydraulic reset button needed

  Durable hydraulic lines for long life

• Heavy-Duty Cooling System

  Large 4 gallon hydraulic reservoir

  Return line hydraulic filter extends life

  No special hydraulic fluid needed

  Proven cooler and blower system

  Easy to use drain plug

• MaxLife Endurance Pump

  Proven design and performance

  Only 16 cycles per gallon (4.2 cycles per liter)

  Exclusive MaxLife rod and sleeve delivers unmatched durability and life – Graco's best

  Exclusive QuikChange Pump System and QuikAccess Intake Valve eliminates downtime

• Flow-Through Filter System

  Inside/out design eliminates clogged filters

  Eliminates tip clogs

• Ready-To-Spray Complete System

  Configured with 50 feet of pressure-rated hose, gun, tips, and all the fittings you will need

• Model: GH
• Series: 833

• Compatible Material: Acrylics, Block Filler, Coal Tar, Contact Cement, Elastomerics, Enamel, Epoxies, Fibered Aluminum Emulsion, Fibered Asphalt Emulsion, Mastics, Non-Fibered Aluminum Emulsion, Non-Fibered Asphalt Emulsion, Paint, Polyester, Polyurethane, Primer, Texture Mud, Waterproofing
• Compatible Replacement Pump: 287834

• Control Type: N/A

• Engine Brand: Honda
• Engine Size (HP): 13

• Fluid Inlet Size (in): 1-1/2 to 11-1/2
• Fluid Inlet Thread Type: MNPT

• Fluid Outlet Size (in): 1 to 11-1/2
• Fluid Outlet Thread Type: FNPT

• Frame Configuration: Cart

• Includes: Silver Plus Gun, RAC X 517 Spray Tip, RAC X 655 Spray Tip, RAC X Guard, 3/8 in x 50 ft BlueMax II HP Airless Hose, 1/4 in x 3 ft BlueMax II HP Airless Whip Hose

• Material Application: Paints, Primers

• Maximum Flow Rate (GPM): 4.0
• Maximum Flow Rate (L/min): 15.1

• Maximum Hose Length (ft): 50
• Maximum Hose Length (m): 15

• Maximum Sound Pressure Level (dB(A)): 91

• Maximum Tip Size (in): 0.065
• Maximum Tip Size Gun 2 (in): 0.046
• Maximum Tip Size Gun 3 (in): 0.037
• Maximum Tip Size Gun 4 (in): 0.032
• Maximum Tip Size Gun 5 (in): 0.029

• Maximum Tip Size Gun 6 (in): 0.026

• Maximum Working Pressure (bar): 275.8
• Maximum Working Pressure (kPa): 27580
• Maximum Working Pressure (MPa): 27.6
• Maximum Working Pressure (psi): 4000

• Motor Type: Hydraulic Motor

• Number of Guns: 6

• Outlet Paint Filter: 60 Mesh Stainless Steel Screen

• Power Rating (cc): 390
• Power Rating (HP): 13
• Power Rating (kW): 9.7
• Power Rating (W): 9694
• Power Source: Gas Hydraulic
• Pressure Control Type: Pressure Control Knob

• Product Ty

GG 249849

CONTROL, FLOW, REGULATOR

Graco 249849 Flow Control Module with Integrated Air-Operated Fluid Regulator

• Compatible Material: Solventborne

GG 249585

GG 249571

REACTOR E-10 PROPORTIONER, CMPLT, 240V, 2X10A, HTD

Graco 249571 Reactor E-10 Heated Proportioner with (2) 10 A Circuits, 240 V

Gracos Reactor E-10 is a small, ready-to-use system that helps you get in and get smaller jobs done fast without sacrificing performance. The Reactor E-10 sprayers are ideal for plural-component spray, joint-fill jobs and touch-ups. With smart controls that are easy to setup and simple to operate, the E-10 is a natural complement to any proportioning equipment line-up.

• Small size
  

  Ideal for on-site portability and hard-to-reach areas

• Cost Savings
  

  One-person operation saves time and money

• Extent your spray business
  

  Use as an add-on to your existing spray business

• Material savings
  

  Saves 30% on material costs compared to disposable foam systems

• Electric power
  

  Low draw and plugs into standard outlets

• Single Knob Operation
  

  Intuitive start, stop and digital temperature display with single knob operation

• Easily balancing
  

  Pressure balance valves give you quick and easy balancing of system pressures

  Balanced proportioning eliminates pressure fluctuations to give you a consistent spray pattern

• Easy-to-service fluid section
  

  Reduces maintenance and increases productivity

• Electric motor
  

  Improves performance and reduces operating costs

• Spray on-ratio
  

  Self-contained translucent material tanks show you that you are spraying on-ratio

• Pre-heat material
  

  Heaters and hose give you up to 2000 watts to pre-heat circulating material

• Model: Reactor
• Series: E-10

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35

• Air Outlet Size (cm): 0.635
• Air Outlet Size (in): 1/4
• Air Outlet Size (mm): 6.35
• Air Outlet Thread Type: NPSM

• Amperage (A): 10
• Application: Spray Foam
• Applicator Type: Manual

• Compatible Material: Plural Components

• Component Type: Two Component

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Type: No Gun

• Hose Package: No Hose

• Material Application: Polyurethane Foam

• Maximum Flow Rate (kg/min): 5.44
• Maximum Flow Rate (lb/min): 12

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160

• Maximum Fluid Temperature (°C): 71
• Maximum Fluid Temperature (°F): 160

• Maximum Hose Length (ft): 35
• Maximum Hose Length (m): 94.5

• Maximum Mix Ratio: 1:1

• Maximum Working Pressure (bar): 138
• Maximum Working Pressure (kPa): 13800
• Maximum Working Pressure (MPa): 13.8
• Maximum Working Pressure (psi): 2000

• Overall Depth (cm): 76.2
• Overall Depth (in): 30
• Overall Depth (mm): 762

• Overall Height (cm): 111.8
• Overall Height (in): 44
• Overall Height (mm): 1118
• Overall Width (cm): 67.3
• Overall Width (in): 26.5
• Overall Width (mm): 673

• Power Rating (HP): 5.10
• Power Rat

GG 24A155

KIT,REPAIR,SHAFT AND BEARING

Graco 24A155 Shaft and Bearing Repair Kit- for Triton 308 Diaphragm Pumps

GG 24A253

KIT, REPAIR,VEE, 75CC

Graco 24A253 Standard Seal Repair Kit for Merkur LW075A

GG 24A226

GG 24A254

KIT, REPAIR,VEE, 100CC

Graco 24A254 Standard Seal Repair Kit for Merkur LW100A

GG 24A255

KIT, REPAIR,VEE, 125CC

Graco 24A255 Standard Seal Repair Kit for Merkur LW125A

GG 24A256

KIT, REPAIR,VEE, 150CC

Graco 24A256 Standard Seal Repair Kit for Merkur LW150A

GG 24A281

GG 24A261

GG 24A264

GG 24A271

GG 24A263

GG 24A283

GG 24A352

GG 24A354

GG 24A351

GG 24A366

KIT, MOTOR,PILOT VALVE

GG 24A413

GG 24A438

GG 24A536

KIT, SEALS, AIR VALVE, MEDIUM

Graco 24A536 Air Valve Seal Kit

GG 24A445

GG 24A538

KIT, MECH,AIR VALVE MEDIUM

Graco 24A538 Air Valve Repair Kit, for Graco Air Valve Models 24A352, 24A354, and 262608

Always install a new gasket when installing a new air valve

GG 24A543

GG 24A541

GG 24A547

KIT, SEALS, MOTOR 6.0

Graco 24A547 Air Motor Seal Kit

GG 24A546

GG 24A551

KIT, SEALS MOTOR, 7.5

Graco 24A551 Air Motor Seal Kit

GG 24A549

GG 24A576

GG 24A578

GG 24A587

KIT, FLUID FILTER

Graco 24A587 Pump Outlet Fluid Filter, Stainless Steel, 60 mesh (250 micron), 5000 psi (350 bar)

GG 24A621

GG 24A619

GG 24A624

GG 24A626

GG 24A631

GG 24A633

GG 24A643

KIT, ROD,DISPL,WETCUP,25CC

Graco 24A643 Merkur Piston Rob Assembly Kit for Merkur Displacement Pump

GG 24A636

GG 24A376

KIT,AIR CAP,GRAY

Graco 24A376 Gray Aircap Color Kit- Pattern Width 17-19 in.

PRO Xs Electrostatic Aircaps A complete range of PRO Xs Aircaps to fit the precise need of a wide variety of applications

• Improve spray performance
• Deliver better atomization
• Stay cleaner longer Deliver wider spray patterns

GG 24A644

KIT, ROD,DISPL,WETCUP,50CC

GG 24A535

GG 24A537

GG 24A657

KIT, REPAIR, VEE, BELLOWS, 150CC

Graco 24A657 V-Packing Seal Kit for Merkur Bellows LB150A and LB150B

• Compatible Material: CARC, High Solids, Metallics, Solventborne, Stains, Varnish, Xirallic

GG 24A689

KIT, NEEDLE AND NOZZLE, .055

Graco 24A689 Needle/Nozzle Kit for AirPro Automatic Guns with 0.055 inch (1.4 mm) Nozzle, General Metal

GG 24A685

GG 24A662

GG 24A670

GG 289030

AIRPRO GUN, SIPHON, HVLP, .055

Graco 289030 AirPro Air Spray Siphon Feed Gun, HVLP, 0.055 inch (1.4 mm) Nozzle, Metal Siphon Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

• Even material distribution through the spray pattern for optimum coverage
• Improved transfer efficiency through reduced air consumption
• Enhanced atomization through material-specific aircaps
• Ultra-light trigger pull reduces operator muscle stress
• Ergonomic gun handle provides a comfortable grip
• Rounded control knobs for operator comfort
• Optimize spray performance with our cutting edge aircap and nozzle design
• Choose from a wide range of gun models to meet the needs of your specific application

• Model: AirPro

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Application: Specialty
• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Siphon Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.14
• Fluid Orifice Size (in): 0.055
• Fluid Orifice Size (mm): 1.4

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: HVLP Gun
• Gun Weight (g): 410

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Product Type: Spray Gun

GG 289023

AIRPRO GUN, ASSY, HVLP, GRAV, PPS, .055

Graco 289023 AirPro Air Spray Gravity Feed Gun, HVLP, 0.055 inch (1.4 mm) Nozzle, 3M PPS Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

• Even material distribution through the spray pattern for optimum coverage
• Improved transfer efficiency through reduced air consumption
• Enhanced atomization through material-specific aircaps
• Ultra-light trigger pull reduces operator muscle stress
• Ergonomic gun handle provides a comfortable grip
• Rounded control knobs for operator comfort
• Optimize spray performance with our cutting edge aircap and nozzle design
• Choose from a wide range of gun models to meet the needs of your specific application

• Model: AirPro

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Application: Specialty
• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Gravity Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.14
• Fluid Orifice Size (in): 0.055
• Fluid Orifice Size (mm): 1.4

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: HVLP Gun
• Gun Weight (g): 410

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Product Type: Spray Gun

GG 289038

GG 289027

AIRPRO GUN, ASSY, COMP, GRAV, PPS, .070

Graco 289027 AirPro Air Spray Gravity Feed Gun, Compliant, 0.070 inch (1.8 mm) Nozzle, 3M PPS Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

• Even material distribution through the spray pattern for optimum coverage
• Improved transfer efficiency through reduced air consumption
• Enhanced atomization through material-specific aircaps
• Ultra-light trigger pull reduces operator muscle stress
• Ergonomic gun handle provides a comfortable grip
• Rounded control knobs for operator comfort
• Optimize spray performance with our cutting edge aircap and nozzle design
• Choose from a wide range of gun models to meet the needs of your specific application

• Model: AirPro

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Application: Specialty
• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Gravity Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.18
• Fluid Orifice Size (in): 0.070
• Fluid Orifice Size (mm): 1.8

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Compliant Gun
• Gun Weight (g): 410

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Product Type: Spray Gun

GG 289018

AIRPRO GUN, ASSY, COMP, GRAVITY W/CUP

Graco 289018 AirPro Air Spray Gravity Feed Gun, Compliant, 0.070 inch (1.8 mm) Nozzle, Plastic Gravity Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

• Even material distribution through the spray pattern for optimum coverage
• Improved transfer efficiency through reduced air consumption
• Enhanced atomization through material-specific aircaps
• Ultra-light trigger pull reduces operator muscle stress
• Ergonomic gun handle provides a comfortable grip
• Rounded control knobs for operator comfort
• Optimize spray performance with our cutting edge aircap and nozzle design
• Choose from a wide range of gun models to meet the needs of your specific application

• Model: AirPro

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Application: Specialty
• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Gravity Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.18
• Fluid Orifice Size (in): 0.070
• Fluid Orifice Size (mm): 1.8

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Compliant Gun
• Gun Weight (g): 410

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Product Type: Spray Gun

GG 289016

GG 289014

AIRPRO GUN, ASSY, HVLP, GRAVITY W/CUP

Graco 289014 AirPro Air Spray Gravity Feed Gun, HVLP, 0.055 inch (1.4 mm) Nozzle, Plastic Gravity Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

• Even material distribution through the spray pattern for optimum coverage
• Improved transfer efficiency through reduced air consumption
• Enhanced atomization through material-specific aircaps
• Ultra-light trigger pull reduces operator muscle stress
• Ergonomic gun handle provides a comfortable grip
• Rounded control knobs for operator comfort
• Optimize spray performance with our cutting edge aircap and nozzle design
• Choose from a wide range of gun models to meet the needs of your specific application

• Model: AirPro

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Application: Specialty
• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Gravity Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.14
• Fluid Orifice Size (in): 0.055
• Fluid Orifice Size (mm): 1.4

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: HVLP Gun
• Gun Weight (g): 410

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Product Type: Spray Gun

GG 289017

AIRPRO GUN, ASSY, COMP, GRAVITY W/CUP

Graco 289017 AirPro Air Spray Gravity Feed Gun, Compliant, 0.055 inch (1.4 mm) Nozzle, Plastic Gravity Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

• Even material distribution through the spray pattern for optimum coverage
• Improved transfer efficiency through reduced air consumption
• Enhanced atomization through material-specific aircaps
• Ultra-light trigger pull reduces operator muscle stress
• Ergonomic gun handle provides a comfortable grip
• Rounded control knobs for operator comfort
• Optimize spray performance with our cutting edge aircap and nozzle design
• Choose from a wide range of gun models to meet the needs of your specific application

• Model: AirPro

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Application: Specialty
• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Gravity Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.14
• Fluid Orifice Size (in): 0.055
• Fluid Orifice Size (mm): 1.4

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Compliant Gun
• Gun Weight (g): 410

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Product Type: Spray Gun

GG 289009

AIRPRO GUN, COMP, .070

Graco 289009 AirPro Air Spray Gravity Feed Gun, Compliant, 0.070 inch (1.8 mm) Nozzle, without Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

• Even material distribution through the spray pattern for optimum coverage
• Improved transfer efficiency through reduced air consumption
• Enhanced atomization through material-specific aircaps
• Ultra-light trigger pull reduces operator muscle stress
• Ergonomic gun handle provides a comfortable grip
• Rounded control knobs for operator comfort
• Optimize spray performance with our cutting edge aircap and nozzle design
• Choose from a wide range of gun models to meet the needs of your specific application

• Model: AirPro

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Application: Specialty
• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Gravity Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.18
• Fluid Orifice Size (in): 0.070
• Fluid Orifice Size (mm): 1.8

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Compliant Gun
• Gun Weight (g): 410

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Product Type: Spray Gun

GG 289021

AIRPRO GUN, ASSY, CONV, GRAV, PPS, .070

Graco 289021 AirPro Air Spray Gravity Feed Gun, Conventional, 0.070 inch (1.8 mm) Nozzle, 3M PPS Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

• Even material distribution through the spray pattern for optimum coverage
• Improved transfer efficiency through reduced air consumption
• Enhanced atomization through material-specific aircaps
• Ultra-light trigger pull reduces operator muscle stress
• Ergonomic gun handle provides a comfortable grip
• Rounded control knobs for operator comfort
• Optimize spray performance with our cutting edge aircap and nozzle design
• Choose from a wide range of gun models to meet the needs of your specific application

• Model: AirPro

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Application: Specialty
• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Gravity Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.18
• Fluid Orifice Size (in): 0.070
• Fluid Orifice Size (mm): 1.8

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Conventional Gun
• Gun Weight (g): 410

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Product Type: Spray Gun

GG 289006

AIRPRO GUN, HVLP, .070

Graco 289006 AirPro Air Spray Gravity Feed Gun, HVLP, 0.070 inch (1.8 mm) Nozzle, without Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

• Even material distribution through the spray pattern for optimum coverage
• Improved transfer efficiency through reduced air consumption
• Enhanced atomization through material-specific aircaps
• Ultra-light trigger pull reduces operator muscle stress
• Ergonomic gun handle provides a comfortable grip
• Rounded control knobs for operator comfort
• Optimize spray performance with our cutting edge aircap and nozzle design
• Choose from a wide range of gun models to meet the needs of your specific application

• Model: AirPro

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Application: Specialty
• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Gravity Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.18
• Fluid Orifice Size (in): 0.070
• Fluid Orifice Size (mm): 1.8

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: HVLP Gun
• Gun Weight (g): 410

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Product Type: Spray Gun

GG 289028

AIRPRO GUN, SIPHON, CONV.055

Graco 289028 AirPro Air Spray Siphon Feed Gun, Conventional, 0.055 inch (1.4 mm) Nozzle, Metal Siphon Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

• Even material distribution through the spray pattern for optimum coverage
• Improved transfer efficiency through reduced air consumption
• Enhanced atomization through material-specific aircaps
• Ultra-light trigger pull reduces operator muscle stress
• Ergonomic gun handle provides a comfortable grip
• Rounded control knobs for operator comfort
• Optimize spray performance with our cutting edge aircap and nozzle design
• Choose from a wide range of gun models to meet the needs of your specific application

• Model: AirPro

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Application: Specialty
• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Siphon Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.14
• Fluid Orifice Size (in): 0.055
• Fluid Orifice Size (mm): 1.4

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Conventional Gun
• Gun Weight (g): 410

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Product Type: Spray Gun

GG 289008

AIRPRO GUN, COMP, .055

Graco 289008 AirPro Air Spray Gravity Feed Gun, Compliant, 0.055 inch (1.4 mm) Nozzle, without Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

• Even material distribution through the spray pattern for optimum coverage
• Improved transfer efficiency through reduced air consumption
• Enhanced atomization through material-specific aircaps
• Ultra-light trigger pull reduces operator muscle stress
• Ergonomic gun handle provides a comfortable grip
• Rounded control knobs for operator comfort
• Optimize spray performance with our cutting edge aircap and nozzle design
• Choose from a wide range of gun models to meet the needs of your specific application

• Model: AirPro

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Application: Specialty
• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Gravity Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.14
• Fluid Orifice Size (in): 0.055
• Fluid Orifice Size (mm): 1.4

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Compliant Gun
• Gun Weight (g): 410

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Product Type: Spray Gun

GG 289012

AIRPRO GUN, ASSY, CONV, GRAVITY W/CUP

Graco 289012 AirPro Air Spray Gravity Feed Gun, Conventional, 0.070 inch (1.8 mm) Nozzle, Plastic Gravity Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

• Even material distribution through the spray pattern for optimum coverage
• Improved transfer efficiency through reduced air consumption
• Enhanced atomization through material-specific aircaps
• Ultra-light trigger pull reduces operator muscle stress
• Ergonomic gun handle provides a comfortable grip
• Rounded control knobs for operator comfort
• Optimize spray performance with our cutting edge aircap and nozzle design
• Choose from a wide range of gun models to meet the needs of your specific application

• Model: AirPro

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Application: Specialty
• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Gravity Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.18
• Fluid Orifice Size (in): 0.070
• Fluid Orifice Size (mm): 1.8

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Conventional Gun
• Gun Weight (g): 410

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Product Type: Spray Gun

GG 289035

AIRPRO GUN, AUTOMOTIVE, HVLP, .047

Graco 289035 AirPro Air Spray Pressure Feed Gun, HVLP, 0.047 inch (1.2 mm) Nozzle, for Automotive Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

• Even material distribution through the spray pattern for optimum coverage
• Improved transfer efficiency through reduced air consumption
• Enhanced atomization through material-specific aircaps
• Ultra-light trigger pull reduces operator muscle stress
• Ergonomic gun handle provides a comfortable grip
• Rounded control knobs for operator comfort
• Optimize spray performance with our cutting edge aircap and nozzle design
• Choose from a wide range of gun models to meet the needs of your specific application

• Model: AirPro

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Application: Automotive
• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: Base Coat, Clear Coat, Latex, Plural Component Materials, Primer, Solvent borne, Waterborne

• Feed Type: Pressure Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.12
• Fluid Orifice Size (in): 0.047
• Fluid Orifice Size (mm): 1.2

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: HVLP Gun
• Gun Weight (g): 410

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Product Type: Spray Gun

GG 289029

AIRPRO GUN, SIPHON, CONV, .070

Graco 289029 AirPro Air Spray Siphon Feed Gun, Conventional, 0.070 inch (1.8 mm) Nozzle, Metal Siphon Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

• Even material distribution through the spray pattern for optimum coverage
• Improved transfer efficiency through reduced air consumption
• Enhanced atomization through material-specific aircaps
• Ultra-light trigger pull reduces operator muscle stress
• Ergonomic gun handle provides a comfortable grip
• Rounded control knobs for operator comfort
• Optimize spray performance with our cutting edge aircap and nozzle design
• Choose from a wide range of gun models to meet the needs of your specific application

• Model: AirPro

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Application: Specialty
• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Siphon Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.18
• Fluid Orifice Size (in): 0.070
• Fluid Orifice Size (mm): 1.8

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Conventional Gun
• Gun Weight (g): 410

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Product Type: Spray Gun

GG 289037

AIRPRO GUN, AUTOMOTIVE, COMPLIANT, .047

Graco 289037 AirPro Air Spray Pressure Feed Gun, Compliant, 0.047 inch (1.2 mm) Nozzle, for Automotive Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

• Even material distribution through the spray pattern for optimum coverage
• Improved transfer efficiency through reduced air consumption
• Enhanced atomization through material-specific aircaps
• Ultra-light trigger pull reduces operator muscle stress
• Ergonomic gun handle provides a comfortable grip
• Rounded control knobs for operator comfort
• Optimize spray performance with our cutting edge aircap and nozzle design
• Choose from a wide range of gun models to meet the needs of your specific application

• Model: AirPro

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Application: Automotive
• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: Base Coat, Clear Coat, Latex, Plural Component Materials, Primer, Solvent borne, Waterborne

• Feed Type: Pressure Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.12
• Fluid Orifice Size (in): 0.047
• Fluid Orifice Size (mm): 1.2

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Compliant Gun
• Gun Weight (g): 410

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Product Type: Spray Gun