GRACO INC. S10595
Plate, Follower, Mega, TOF200
GG 24V633
PLATE,FOLLOWER,MEGA,TOF200
- Compatible Material: Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC
Kit, Seal, Pump, Glass Filled
GG 24V753
KIT, SEAL, PUMP, GLASS FILLED
KIT INCLUDES: WASHER, SEAL, BACK-UP [QTY. 1], PACKING, U-CUP [QTY. 2], WASHER, SCRAPER [QTY. 1], NUT, PACKING [QTY. 1], WASHER, ROD, SCRAPER [QTY. 1], PACKING, O-RING, PTFE [QTY. 1], LUBRICANT, TUBE, 1 OZ [QTY. 1]
Kit, Seal, Pump, Carbon Filled
GG 24V752
KIT, SEAL, PUMP, CARBON FILLED
KIT INCLUDES: WASHER, SEAL, BACK-UP [QTY. 1], PACKING, U-CUP [QTY. 2], WASHER, SCRAPER [QTY. 1], NUT, PACKING [QTY. 1], WASHER, ROD, SCRAPER [QTY. 1], PACKING, O-RING, PTFE [QTY. 1], LUBRICANT, TUBE, 1 OZ [QTY. 1]
SD BLUE DEF SYSTEM, AODD, WALL, DISP, W/MTR
GG 24V677
SD BLUE DEF SYSTEM, AODD, WALL, DISP, W/MTR
Graco 24V677 SD™ Blue Pump Tote Package - 5 ft (1.5 m) Suction Hose Length - Automatic Nozzle - SST Clamp Fittings
Graco&prime, s SD Series DEF solutions are built on versatility with a Husky 515 AODD pump delivering up to 15 gpm (57 lpm) and operating on as little as 30 to 50 psi (2.1 to 3.4 bar). Increasing productivity this powerful pneumatic design provides superior suction and lift in tanks, totes and drums. Whether a small garage or large dealership, Graco has a complete line of Diesel Exhaust Fluid (DEF) for every application, capable of higher outputs over longer runs.
Application: Typical applications include automotive and heavy-duty dealerships, mining, service and fast lube centers, fleet service facilities, in-plant, and lube trucks.- Modular air valve with a stall-free, low-pulsation design for smooth and rapid changeover to increase efficiency and minimize downtime
- Robust design with bolt-through fluid cover design to eliminate leaks and provide safety and reliability
- Rugged construction built to resist corrosion for reliable performance and long life
- Center and end porting options available
- Up to 15 ft (4.57 m) of suction lift provides installation flexibility
- 5 year warranty. See manufacturers website for details.
- Model: SD
- Application: Industrial
- Compatible Material: Diesel Exhaust Fluid
- Fluid Inlet Size (cm): 1.9050
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Size (mm): 19.05
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: BSPP
- Fluid Outlet Size (cm): 1.905
- Fluid Outlet Size (in): 3/4
- Fluid Outlet Size (mm): 19.05
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: BSPP
- For Use With: DEF
- Hose Length (ft): 5
- Includes: Air Operated Diaphragm Pump, Mounting Bracket, LD Automatic Nozzle with SST Spout, LD DEF Meter, Dispense Hose and 2 Clamps, Suction Hose and 2 Clamps, Air Safety Valve
- Inlet Size (cm): 1.905
- Inlet Size (in): 3/4
- Inlet Size (mm): 19.05
- Inlet Thread Gender: Female
- Inlet Thread Type: BSPP
- Maximum Air Pressure (bar): 4
- Maximum Air Pressure (kPa): 40
- Maximum Air Pressure (psi): 50
- Maximum Cycle Rate (CPM): 400
- Maximum Fluid Pressure (bar): 3.4
- Maximum Fluid Pressure (kPa): 34
- Maximum Fluid Pressure (MPa): 0.3
- Maximum Fluid Pressure (psi): 50
- Maximum Fluid Pressure (bar): 3.4
- Maximum Fluid Pressure (kPa): 34
- Maximum Fluid Pressure (MPa): 0.3
- Maximum Fluid Pressure (psi): 50
- Maximum Solid Size (cm): 0.2381
- Maximum Solid Size (in): 0.09375
- Maximum Solid Size (mm): 2.3813
- Mount Location: Tote Mount
MERKUR M2K SPRAYER, AS, 3:1, CART
GG 24V870
MERKUR M2K SPRAYER, AS, 3:1, CART
Graco 24V870 3:1 M2K Air Spray Mechanical Proportioner Package, cart mount, AirPro gun and standard mix manifold
Upgrade from hand mixing to the efficient M2K mechanical sprayer. M2K Air Spray is ideal for low-pressure applications where a high quality finish is required.
- Increase mix material accuracy to improve finish quality and reduce material waste, compared to hand mixing
- Compact size makes it faster and easier to flush, saving you time and disposal costs
- Ideal for lower volume two component epoxy, polyurethane and polyester materials
- Model: M2K
- Component Type: Two Component
- Fluid Hose Inside Diameter (in): 0.25
- Fluid to Air Ratio: 4:1
- Gun Activation: Manual
- Includes: AirPro Gun, Standard Mix Manifold
- Material Type: Two Component
- Maximum Air Pressure (bar): 5
- Maximum Air Pressure (kPa): 50
- Maximum Air Pressure (psi): 65
- Maximum Flow Rate (GPM): 0.5
- Maximum Flow Rate (L/min): 2.0
- Maximum Hose Length (ft): 25
- Maximum Hose Length (m): 7.5
- Maximum Number of Colors: 1
- Maximum Working Pressure (bar): 15
- Maximum Working Pressure (kPa): 1500
- Maximum Working Pressure (psi): 225
- Mix Ratio: 3:1
- Mount Type: Cart Mount
- Number of Color Valves: N/A
- Proportioner Type: Mechanical
- Proportioning Type: Manual Mechanical
- Pump Lower A Size (cc): 75
- Pump Lower B Size (cc): 25
MERKUR M2K SPRAYER, AA, 4:1, CART
GG 24V883
MERKUR M2K SPRAYER, AA, 4:1, CART
Graco 24V883 4:1 M2K Air Assisted Mechanical Proportioner Package, cart mount, PerformAA 50 gun and standard mix manifold
Upgrade from hand mixing to the efficient M2K mechanical sprayer. M2K Air-Assist is for low to high fluid viscosity and maximum fluid pressure of 3000 psi (206 bar).
- Increase mix material accuracy to improve finish quality and reduce material waste, compared to hand mixing
- Compact size makes it faster and easier to flush, saving you time and disposal costs
- Ideal for lower volume two component epoxy, polyurethane and polyester materials
- Model: M2K
- Component Type: Two Component
- Fluid Hose Inside Diameter (in): 0.19
- Fluid to Air Ratio: 29:1
- Gun Activation: Manual
- Includes: G40 Gun, Standard Mix Manifold
- Material Type: Two Component
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 70
- Maximum Air Pressure (psi): 100
- Maximum Flow Rate (GPM): 0.7
- Maximum Hose Length (ft): 25
- Maximum Hose Length (m): 7.6
- Maximum Number of Colors: 1
- Maximum Working Pressure (bar): 207
- Maximum Working Pressure (kPa): 20700
- Maximum Working Pressure (MPa): 20.7
- Maximum Working Pressure (psi): 3000
- Mix Ratio: 4:1
- Mount Type: Cart Mount
- Number of Color Valves: N/A
- Proportioner Type: Mechanical
- Proportioning Type: Manual Mechanical
- Pump Lower A Size (cc): 100
- Pump Lower B Size (cc): 25
MERKUR M2K SPRAYER, AL, 4:1, WALL
GG 24V902
MERKUR M2K SPRAYER, AL, 4:1, WALL
Graco 24V902 4:1 M2K Airless Mechanical Proportioner, wall mount, and standard mix manifold
Upgrade from hand mixing to the efficient M2K mechanical sprayer. M2K Airless is ideal for quickly applying high
volumes of protective coatings to large surfaces.
- Increase mix material accuracy to improve finish quality and reduce material waste, compared to hand mixing
- Compact size makes it faster and easier to flush, saving you time and disposal costs
- Ideal for lower volume two component epoxy, polyurethane and polyester materials
- Model: M2K
- Component Type: Two Component
- Fluid to Air Ratio: 29:1
- Gun Activation: Manual
- Includes: Standard Mix Manifold
- Material Type: Two Component
- Maximum Flow Rate (GPM): 0.7
- Maximum Flow Rate (L/min): 2.65
- Maximum Number of Colors: 1
- Maximum Working Pressure (bar): 204
- Maximum Working Pressure (kPa): 20400
- Maximum Working Pressure (MPa): 20.4
- Maximum Working Pressure (psi): 3000
- Mix Ratio: 4:1
- Number of Color Valves: N/A
- Proportioner Type: Mechanical
- Proportioning Type: Manual Mechanical
- Pump Lower A Size (cc): 100
- Pump Lower B Size (cc): 25
MERKUR M2K SPRAYER, AS, 4:1, CART
GG 24V871
MERKUR M2K SPRAYER, AS, 4:1, CART
Graco 24V871 4:1 M2K Air Spray Mechanical Proportioner Package, cart mount, AirPro gun and standard mix manifold
Upgrade from hand mixing to the efficient M2K mechanical sprayer. M2K Air Spray is ideal for low-pressure applications where a high quality finish is required.
- Increase mix material accuracy to improve finish quality and reduce material waste, compared to hand mixing
- Compact size makes it faster and easier to flush, saving you time and disposal costs
- Ideal for lower volume two component epoxy, polyurethane and polyester materials
- Component Type: Two Component
- Fluid Hose Inside Diameter (in): 0.25
- Fluid to Air Ratio: 3.2:1
- Gun Activation: Manual
- Includes: AirPro Gun, Standard Mix Manifold
- Material Type: Two Component
- Maximum Air Pressure (bar): 5
- Maximum Air Pressure (kPa): 50
- Maximum Air Pressure (psi): 75
- Maximum Flow Rate (GPM): 0.7
- Maximum Flow Rate (L/min): 2.5
- Maximum Hose Length (ft): 25
- Maximum Hose Length (m): 7.5
- Maximum Number of Colors: 1
- Maximum Working Pressure (bar): 15
- Maximum Working Pressure (kPa): 1500
- Maximum Working Pressure (psi): 225
- Mix Ratio: 4:1
- Mount Type: Cart Mount
- Number of Color Valves: N/A
- Proportioner Type: Mechanical
- Proportioning Type: Manual Mechanical
- Pump Lower A Size (cc): 100
- Pump Lower B Size (cc): 25
Kit, Manifold, Mix, Remote
GG 24V436
KIT, MANIFOLD, MIX, REMOTE
Graco 24V436 Remote Mix Manifold for PD2K & PD3K
Repair Kit, AWB
GG 24V816
KIT,REPAIR, AWB
Graco 24V816 Awb Repair Kit
KIT INCLUDES: MODULE, GCA, AWB [QTY. 1], FLASH DRIVE, USB, 2.0 [QTY. 1]
- Compatible Material: Solventborne, High Solids, Xirallic, CARC, Metallics
KIT, REPAIR, MZLP W/FUSES
GG 24V510
KIT, REPAIR, MZLP W/FUSES
MZLP Repair Kit with Fuses KIT INCLUDES: MODULE, GCA, MZLP [QTY. 1 ]; LABEL, IDENTIFICATION [QTY. 1 ]; SOFTWARE, GCA, MZLP, APP [QTY. 1 ]; FLASH DRIVE, USB, 2.0 [QTY. 1 ]
LD SYSTEM, DEFTOTE, 12V, W/MTR & AUTONOZ
GG 24V646
LD SYSTEM, DEFTOTE, 12V, W/MTR & AUTONOZ
Graco 24V646 LD Blue Electric Pump Package - 5 ft (1.5 m) Suction Hose Length - Manual Nozzle - SST Clamp Fittings
Graco&prime, s LD Series DEF solutions offer long-lasting efficiency in a compact, high-performance electric pump package capable of pumping up to 9 gpm (34 lpm). Whether a small garage, large dealership, or heavy equipment maintenance facility, Graco has a complete line of Diesel Exhaust Fluid (DEF) products for every application. Our electric, pneumatic, or manual products are engineered specifically for the advanced needs of DEF fluid and are designed to minimize downtime and dispense materials quickly without compromising chemical integrity.
Application: Typical applications include automotive and heavy-duty dealerships, agriculture, service and fast lube centers, and fleet service facilities.- Reduces maintenance featuring a self-priming membrane pump
- Stays running longer, reducing downtime and getting more work done with the LD Blue Systems- up to twice the life of competitive pumps.
- Built-in safety and reliability with an automatic shut off timer (6.5min) incorporated into 120V pumps.
- 2 Year Warranty. See manufacturers website for details.
- Model: LD
- Series: Blue
- Application: Industrial
- Compatible Material: Diesel Exhaust Fluid
- Fluid Inlet Size (cm): 2.5400
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4
- Fluid Outlet Size (in): NPT
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: BSP
- For Use With: DEF
- Includes: 12 V Electric Pump, Stainless Steel Bracket with Nozzle Holder, LD Automatic Nozzle with SST Spout, LD DEF Meter, Elbow Fitting, Dispense Hose and 2 Clamps, Suction Hose and 2 Clamps
- Maximum Fluid Pressure (bar): 3.5
- Maximum Fluid Pressure (kPa): 35
- Maximum Fluid Pressure (MPa): 0.35
- Maximum Fluid Pressure (psi): 50
- Maximum Fluid Pressure (bar): 3.5
- Maximum Fluid Pressure (kPa): 35
- Maximum Fluid Pressure (MPa): 0.35
- Maximum Fluid Pressure (psi): 50
ELEVATOR, SANITARY, MOBILE, 6:1
GG 24V312
ELEVATOR, SANITARY, MOBILE, 6:1
Graco 24V312 6:1 Ratio SaniForce Elevator with Cart & Handle
Still using hoists and chains to unload your drums or bins? Graco&prime, s SaniForce Elevator is ideal for small to medium size food and personal care companies who currently unload less than 2 containers per hour. Use with Graco&prime, s SaniForce 2:1, 5:1 or 6:1 Piston Pumps to transfer small batches of low to medium viscosity fluids.
Application: Ideal for small to medium size companies who currently unload containers by scooping or using chains/hoists- FDA-compliant
- Use in sanitary applications to transfer low to medium viscosity fluids
- Designed to lower pumps into and lift pumps out of drums, bins and totes
- Mobile and stationary options available
- Model: SaniForce
- Air Inlet Size (in): 0.5
- Air Inlet Size (mm): 12.7
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Sanitary
- Compatible Material: Food, Personal Care
- For Use With: Food, Personal Care, Pharmaceutical
- Includes: Cart and Handle
- Material: Stainless Steel
- Maximum Air Inlet Pressure (bar): 6.9
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Continuous Cycle Rate (CPM): 60
- Maximum Intermittent Cycle Rate (CPM): 60
- Maximum Working Pressure (bar): 41
- Maximum Working Pressure (kPa): 4100
- Maximum Working Pressure (MPa): 4.1
- Maximum Working Pressure (psi): 600
- Portable: Portable
- Pump Ratio: 6:1
KIT, ACCY, JETROLLER, 18", W/ C/S
GG 24W128
KIT, ACCY, JETROLLER, 18", W/ C/S
JetRoller Attachment, 18 in (46 cm) Finish Your Jobs 4X Faster. The JetRoller combines rolling and spraying into one action to minimize overspray and deliver a perfect finish with the speed, flexibility and comfort of airless spraying. The JetRoller will become THE best timesaving tool in your painting arsenal. A better way to achieve a perfect rolled finish. Save time & money on spray/back roll jobs while eliminating messy roller trays or lugging heavy buckets with cumbersome paint screens and grids. Uses standard 18 in (46 cm) roller covers (sold separately). 2-in-1 Spray & Rolling System- Back rolling & spraying in one pass
- Use as a spray extension or hand roller separately
- Reduce prep and cleanup time on every job
Kit, Lower, Tof200, Cf
GG 24W150
KIT,LOWER,TOF200,CF
KIT INCLUDES: PUMP, TOF200, LONG SHAFT, CF [QTY. 1], KIT INCLUDES: PUMP, TOF200, LONG SHAFT, GF [QTY. 1],
Kit, Lower, Tof200, Gf
GG 24W151
KIT, LOWER, TOF200, GF
KIT INCLUDES: PUMP, TOF200, LONG SHAFT, GF [QTY. 1], KIT INCLUDES: PUMP, TOF20, LONG SHAFT, CF [QTY. 1],
ENDURA-FLO PUMP, 4:1 AODD, 150, TRI, STD
GG 24W345
ENDURA-FLO PUMP, 4:1 AODD, 150, TRI, STD
Endura-Flo 4D150, 4:1 Air Operated Diaphragm Pump, 150cc, Tri-Clamp The Endura-Flo 4D offers the industry’s highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money. Endure-Flo diaphragms last longer against extreme operating conditions Easy access to critical components for fast online maintenance Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money Minimal solvent to flush and consistent startup pressure make it perfect for multiple color change and piggable systems Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges
GT 750 PUMP, GREASE, 36:1, 400 LB
GG 24W337
GT 750 PUMP, GREASE, 36:1, 400 LB
Graco 24W337 GT 750 36:1 Grease Transfer Pump for 400 lb (180 kg). Pail with Bung Adapter - NPT
The GT 750 pump was engineered to perform in challenging applications and changing environments. The large 7.5-inch (190 mm) air motor and pump lower combination allows the GT 750 pump to move the same amount of grease with up to four times fewer pump strokes.
- Efficient Air Motor -Use less air to move more grease.
- High Flow Rates - Up to 32 lb/min (13.6 kg/min) of grease.
- High Volume Per Stroke - Pump more grease without having to drive pump too quickly to damage seals.
- Multiple Tank Options - Available in 35, 120 and 400 lb (16, 54 and 181 kg) down tube lengths.
- Model: GT 750
- Air Inlet Size (in): 0.5
- Air Inlet Size (mm): 12.7
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Air Motor Effective Diameter (in): 7.5
- Application: Grease
- Compatible Material: Grease
- Fluid Inlet Thread Type: NPT
- Fluid Inlet Type: NPT
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- For Use With: Grease up to NLGI 2
- Includes: 2 Inch Bung Adapter and Lift Ring, 400 lb (181 kg) Lower
- Maximum Air Consumption (SCFM): 130
- Maximum Air Inlet Pressure (bar): 6.9
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Continuous Cycle Rate (CPM): 60
- Maximum Working Pressure (bar): 248.2
- Maximum Working Pressure (kPa): 24820
- Maximum Working Pressure (MPa): 24.8
- Maximum Working Pressure (psi): 3600
- Output Per Cycle (cm³): 180
- Pump Ratio: 36:1
ENDURA-FLO PUMP, 4:1 AODD, 150, NPT, STD
GG 24W346
ENDURA-FLO PUMP, 4:1 AODD, 150, NPT, STD
Endura-Flo 4D150, 4:1 Air Operated Diaphragm Pump, 150cc, NPT The Endura-Flo 4D offers the industry’s highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money. Endure-Flo diaphragms last longer against extreme operating conditions Easy access to critical components for fast online maintenance Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money Minimal solvent to flush and consistent startup pressure make it perfect for multiple color change and piggable systems Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges
ENDURA-FLO PUMP, 4:1 AODD, 150, BSP, STD
GG 24W347
ENDURA-FLO PUMP, 4:1 AODD, 150, BSP, STD
Endura-Flo 4D150, 4:1 Air Operated Diaphragm Pump, 150cc, BSPP The Endura-Flo 4D offers the industry’s highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money. Endure-Flo diaphragms last longer against extreme operating conditions Easy access to critical components for fast online maintenance Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money Minimal solvent to flush and consistent startup pressure make it perfect for multiple color change and piggable systems Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges
ENDURA-FLO PUMP, 4:1 AODD, 150, TRI, ADV
GG 24W348
ENDURA-FLO PUMP, 4:1 AODD, 150, TRI, ADV
Endura-Flo 4D150, 4:1 Air Operated Diaphragm Pump, 150cc, Tri-Clamp, DataTrak The Endura-Flo 4D offers the industry’s highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money. Endure-Flo diaphragms last longer against extreme operating conditions Easy access to critical components for fast online maintenance Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money Minimal solvent to flush and consistent startup pressure make it perfect for multiple color change and piggable systems Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges DataTrek option prevents runaway and tracks material usage
ENDURA-FLO PUMP, 4:1 AODD, 150, NPT, ADV
GG 24W349
ENDURA-FLO PUMP, 4:1 AODD, 150, NPT, ADV
Endura-Flo 4D150, 4:1 Air Operated Diaphragm Pump, 150cc, NPT, DataTrak The Endura-Flo 4D offers the industry’s highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money. Endure-Flo diaphragms last longer against extreme operating conditions Easy access to critical components for fast online maintenance Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money Minimal solvent to flush and consistent startup pressure make it perfect for multiple color change and piggable systems Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges DataTrek option prevents runaway and tracks material usage
ENDURA-FLO PUMP, 4:1 AODD, 350, TRI, STD
GG 24W351
ENDURA-FLO PUMP, 4:1 AODD, 350, TRI, STD
Endura-Flo 4D350, 4:1 Air Operated Diaphragm Pump, 350cc, Tri-Clamp The Endura-Flo 4D offers the industry’s highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money. Endure-Flo diaphragms last longer against extreme operating conditions Easy access to critical components for fast online maintenance Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money Minimal solvent to flush and consistent startup pressure make it perfect for multiple color change and piggable systems Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges
ENDURA-FLO PUMP, 4:1 AODD, 350, NPT, STD
GG 24W352
ENDURA-FLO PUMP, 4:1 AODD, 350, NPT, STD
Endura-Flo 4D350, 4:1 Air Operated Diaphragm Pump, 350cc, NPT The Endura-Flo 4D offers the industry’s highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money. Endure-Flo diaphragms last longer against extreme operating conditions Easy access to critical components for fast online maintenance Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money Minimal solvent to flush and consistent startup pressure make it perfect for multiple color change and piggable systems Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges
ENDURA-FLO PUMP, 4:1 AODD, 350, BSP, STD
GG 24W353
ENDURA-FLO PUMP, 4:1 AODD, 350, BSP, STD
Graco 24W353 Endura-Flo 4D350, 4:1 Air Operated Diaphragm Pump, 350cc, BSPP
The Endura-Flo 4D offers the industry’s highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money.
- Endure-Flo diaphragms last longer against extreme operating conditions
- Easy access to critical components for fast online maintenance
- Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money
- Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges
- Model: Endura-Flo
- Series: 4D350
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Circulation
- Compatible Material: High Solids, Xirallic, CARC, Metallics, Stains, Varnish, Fast-Set
- Connection Type: Threaded
- Fluid Inlet Size (cm): 1.905
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Size (mm): 19.05
- Fluid Inlet Thread Type: BSPP
- Fluid Outlet Size (cm): 1.905
- Fluid Outlet Size (in): 3/4
- Fluid Outlet Size (mm): 19.05
- Fluid Outlet Thread Type: BSPP
- Includes: BSPP Fittings
- Material: Stainless Steel
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Cycle Rate (CPM): 20
- Maximum Flow Rate (GPM): 5.5
- Maximum Flow Rate (L/min): 20.8
- Maximum Fluid Pressure (bar): 28
- Maximum Fluid Pressure (kPa): 2800
- Maximum Fluid Pressure (MPa): 2.8
- Maximum Fluid Pressure (psi): 400
- Maximum Fluid Pressure (bar): 28
- Maximum Fluid Pressure (kPa): 2800
- Maximum Fluid Pressure (MPa): 2.8
- Maximum Fluid Pressure (psi): 400
- Maximum Operating Temperature (°C): 50
- Maximum Operating Temperature (°F): 122
- Minimum Operating Temperature (°C): 0
- Minimum Operating Temperature (°F): 32
- Overall Height (in): 14.39
- Power Source: Air
- Pump Ratio: 4:1
ENDURA-FLO PUMP, 4:1 AODD, 350, TRI, ADV
GG 24W354
ENDURA-FLO PUMP, 4:1 AODD, 350, TRI, ADV
Graco 24W354 Endura-Flo 4D350, 4:1 Air Operated Diaphragm Pump, 350cc, Tri-Clamp, DataTrak
The Endura-Flo 4D offers the industry’s highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money.
- Endure-Flo diaphragms last longer against extreme operating conditions
- Easy access to critical components for fast online maintenance
- Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money
- Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges
- DataTrek option prevents runaway and tracks material usage
- Model: Endura-Flo
- Series: 4D350
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Circulation
- Compatible Material: High Solids, Xirallic, CARC, Metallics, Stains, Varnish, Fast-Set
- Connection Type: Tri-Clamp
- Fluid Inlet Size (cm): 2.54
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4
- Fluid Outlet Size (cm): 2.54
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Includes: Tri-Clamp Fittings, DataTrak
- Material: Stainless Steel
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Cycle Rate (CPM): 20
- Maximum Flow Rate (GPM): 5.5
- Maximum Flow Rate (L/min): 20.8
- Maximum Fluid Pressure (bar): 28
- Maximum Fluid Pressure (kPa): 2800
- Maximum Fluid Pressure (MPa): 2.8
- Maximum Fluid Pressure (psi): 400
- Maximum Fluid Pressure (bar): 28
- Maximum Fluid Pressure (kPa): 2800
- Maximum Fluid Pressure (MPa): 2.8
- Maximum Fluid Pressure (psi): 400
- Maximum Operating Temperature (°C): 50
- Maximum Operating Temperature (°F): 122
- Minimum Operating Temperature (°C): 0
- Minimum Operating Temperature (°F): 32
- Power Source: Air
- Pump Ratio: 4:1
ENDURA-FLO PUMP, 4:1 AODD, 350, NPT, ADV
GG 24W355
ENDURA-FLO PUMP, 4:1 AODD, 350, NPT, ADV
Endura-Flo 4D350, 4:1 Air Operated Diaphragm Pump, 350cc, NPT, DataTrak The Endura-Flo 4D offers the industry’s highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money. Endure-Flo diaphragms last longer against extreme operating conditions Easy access to critical components for fast online maintenance Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money Minimal solvent to flush and consistent startup pressure make it perfect for multiple color change and piggable systems Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges DataTrek option prevents runaway and tracks material usage
HYDRA-CLEAN SYSTEM, AIR, 30:1, CART
GG 24W473
HYDRA-CLEAN SYSTEM, AIR, 30:1, CART
Graco 24W473 Hydra-Clean® 30:1 Cart Mount Pneumatic Pressure Washer Package with Hose Reel
Clean up your facility the quick, easy and efficient way with Graco Hydra-Clean pressure washers! Designed with Graco’s NXT air motor, it&prime, s ideal for industrial and sanitary applications including food processing facilities, heavy duty cleaning, maintenance, shipyards, oil rigs and more.
Application: Ideal for heavy duty cleaning and maintenance for industrial and sanitary applications- Great for high pressure cleaning and sanitizing
- Fits most pressure, flow and material requirements
- Use with open-head universal drums
- Spray down portability for use in sanitary applications
- Supports multiple guns
- Efficient cleaning with water, detergent or chemical solutions
- Model: Hydra-Clean
- Air Inlet Size (cm): 1.905
- Air Inlet Size (in): 3/4
- Air Inlet Size (mm): 19.05
- Air Inlet Thread Type: NPT
- Includes: Hose Reel
- Maximum Flow Rate (GPM): 7
- Maximum Flow Rate (L/min): 26
- Maximum Fluid Flow Rate @ 60 CPM (GPM): 6.8
- Maximum Fluid Flow Rate @ 60 CPM (L/min): 25.9
- Maximum Fluid Flow Rate @ 60 CPM (GPM): 6.8
- Maximum Fluid Flow Rate @ 60 CPM (L/min): 25.9
- Maximum Working Pressure (bar): 211
- Maximum Working Pressure (kPa): 21130
- Maximum Working Pressure (MPa): 21.1
- Maximum Working Pressure (psi): 3065
- Motor Series: NXT Air Motor
- Mount Location: Cart Mount w/ Hose Reel
- Mount Type: Cart Mount w/ Hose Reel
- Power Type: Pneumatic
- Pump Ratio: 30:1
- Pump Type: Dura-Flo 1800 Pump
GT 750 PUMP, GREASE, 36:1, STUBBY
GG 24W498
GT 750 PUMP, GREASE, 36:1, STUBBY
GT 750 36:1 Universal Grease Transfer Pump with Bung Adapter- NPTThe GT 750 pump was engineered to perform in challenging applications and changing environments. The large 7.5-inch (190 mm) air motor and pump lower combination allows the GT 750 pump to move the same amount of grease with up to four times fewer pump strokes.
Efficient Air Motor - Use less air to move more grease.
High Flow Rates - Up to 32 lb/min (13.6 kg/min) of grease.
High Volume Per Stroke - Pump more grease without having to drive pump too quickly to damage seals.
Proven Pump Technology - Based on Graco NXT™ pump technology.
Multiple Tank Options - Available in 35, 120 and 400 lb (16, 54 and 181 kg) down tube lengths.
KIT, REPLACEMENT, PISTON ROD, PC
GG 24W617
KIT, REPLACEMENT, PISTON ROD, PC
Graco 24W617 ProConnect Replacement Rod Paint Sprayer Pump Kit for Pro210ES
Replace your pump rod with genuine Graco parts.Replacement part for rebuilding ProConnect pump. kit includes rod with installed piston valve. ProConnect pump is for Pro 210ES cart or stand model sprayers. Refer to the parts manual for your sprayer to ensure part compatibility
Application: Rod and piston are part of the sprayer pump for pumping fluid- Rod and piston are part of the sprayer pump for pumping fluid
- Sprayer does not prime or spray, it may be from high pressure cuts, scratches and wear from not repacking the pump
- Graco tech support can further assist with troubleshooting sprayer operation
- Genuine Graco parts kit includes rod with installed piston valve
- For Use With: Pro210ES Stand, Pro210ES Cart
KIT, REPLACEMENT, CYLINDER, PC
GG 24W619
KIT, REPLACEMENT, CYLINDER, PC
Graco 24W619 Pump Cylinder
Airless Priston Pump Replacement Cylinder
Application: Graco&prime, s dedication to delivering the highest quality products also allows you to protect your investment by offering products that can be repaired to ensure years of reliable service. Use Genuine Graco parts for the longest life, highest performance and best productivity.- Pump Cylinder
RESERVOIR, 4 PINT, 118:1, RH
GG 24W633
RESERVOIR, 4 PINT, 118:1, RH
Graco 24W633 Manzel® MB118 Series Lubricator - 4 Pint (1.9 Liter) Reservoir (4 Pump Stations Max), No Pumps Installed, 118:1 drive on right hand end
Graco Manzel box lubricators – when quality and delivery matter! Made with Graco quality for long life and durability, the Manzel MB118 is the right size for triplex and quintuplex mud pump applications.
Application: MB118 is the right size for triplex and quintuplex mud pump applications.- Provide a proven, cost-effective way to assemble customized oil systems that meet specific requirements by using standard modular components
- Increase opportunities to standardize lube system components and reduce lube maintenance and service costs
- 4 pint (1.9 liter) reservoir (4 pump stations max), no pumps installed, 118:1 drive on RH end
- Model: Manzel
- Series: MB
- Cam Type: Single Lobe
- Compatible Material: Oil
- Drive Location: Right Hand Mount
- Drive Option: Internal Gear Reduction
- Lubricator Gear Ratio: 118:1
- Maximum Drive Speed (RPM): 1800
- Maximum Fluid Viscosity (SUS): 5000
- Maximum Number of Pump Stations: 4
- Maximum Number of Strokes (SPM): 15
- Maximum Operating Temperature (°C): 60
- Maximum Operating Temperature (°F): 140
- Maximum Reservoir Capacity (gal): 0.5
- Maximum Reservoir Capacity (L): 1.9
- Maximum Reservoir Capacity (pt): 4
- Maximum Reservoir Capacity (qt): 2
- Maximum Working Pressure (bar): 517.1
- Maximum Working Pressure (kPa): 51710
- Maximum Working Pressure (psi): 7500
- Minimum Fluid Viscosity (SUS): 80
- Minimum Operating Temperature (°C): -29
- Minimum Operating Temperature (°F): -20
- Number of Pumps: 0
- Overall Depth (cm): 36.2
- Overall Depth (in): 14.25
- Overall Depth (mm): 362
- Overall Width (cm): 13.97
- Overall Width (in): 5.5
- Overall Width (mm): 139.7
HUSKY PUMP, 1050HP, A01AS1SSSPSSPT
GG 24W758
HUSKY PUMP, 1050HP, A01AS1SSSPSSPT
Graco 24W758 Husky 1050HP 1 in. (25.4 mm) NPT SS Pump, AL Center Section, SS Seats, SP Balls & SP Diaphragm
The Husky 1050HP air-operated diaphragm pump is the first pump on the market that allows users to choose between low pressure and high pressure operating modes with Graco’s low-high pressure mode valve. High pressure operation isn’t always required, so switch to the low pressure mode to reduce air consumption up to 50%. These features combined with the quality and reliability of our standard Husky diaphragm pump design make this one of the most unique high pressure diaphragm pumps on the market.
- Benefits of the Husky 1050HP Double Diaphragm Pump
- External Pilots
- Modular Air Valve
- Additional Diaphragm
- Low/High Pressure Operation Valve
- Wetted Components
Utilizes same parts as Husky 1050 which reduces repair part inventory
- Model: Husky
- Series: 1050HP
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 3/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Ball Material: Santoprene
- Center Section Material: Aluminum
- Compatible Material: Antifreeze, Detergent, Gel-Coat, Asphalt, Polyurethane, Polymer, Fibers, Alkyds, Resin, Motor Oil, Grease & Oil, Used Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Oil, Windshield Washer Fluid, Diesel Exhaust Fluid, Water, Water - Wastewater Treatment, Water - Wastewater Transfer, Water, Automotive Undercoating
- Connection Type: Threaded
- Diaphragm Compatible Material: Santoprene
- Diaphragm Material: Santoprene
- Fluid Inlet Size (cm): 2.54
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 2.54
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Material: Stainless Steel
- Manifold Configuration: E
Selectable operating setting
Reduces air consumption
Only use high pressure when required
- Wetted Components
For high pressure operation
- Low/High Pressure Operation Valve
Ease of maintenance
Stall and lube free
- Additional Diaphragm
Ease of maintenance
Reduced down-time (quick change time)
Spring loaded for faster change over
- Modular Air Valve
Increased fluid pressure without sacrificing flow
Low-high pressure mode valve lets you operate the pump as a standard AODD or a high pressure AODD
Reduce air consumption up to 50% with the low pressure mode
Same repair parts as the Husky 1050 diaphragm pump
- External Pilots
HUSKY PUMP, 1050HP, SP/SP/SP/A
GG 24W762
HUSKY PUMP, 1050HP, SP/SP/SP/A
Graco 24W762 Husky 1050HP 1 in. (25.4 mm) NPT AL Pump, AL Center Section, SP Seats, SP Balls & SP Diaphragm
The Husky 1050HP air-operated diaphragm pump is the first pump on the market that allows users to choose between low pressure and high pressure operating modes with Graco’s low-high pressure mode valve. High pressure operation isn’t always required, so switch to the low pressure mode to reduce air consumption up to 50%. These features combined with the quality and reliability of our standard Husky diaphragm pump design make this one of the most unique high pressure diaphragm pumps on the market.
- Benefits of the Husky 1050HP Double Diaphragm Pump
- External Pilots
- Modular Air Valve
- Additional Diaphragm
- Low/High Pressure Operation Valve
- Wetted Components
Utilizes same parts as Husky 1050 which reduces repair part inventory
- Model: Husky
- Series: 1050HP
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 3/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Ball Material: Santoprene
- Center Section Material: Aluminum
- Compatible Material: Antifreeze, Detergent, Gel-Coat, Asphalt, Polyurethane, Polymer, Fibers, Alkyds, Resin, Motor Oil, Grease & Oil, Used Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Oil, Windshield Washer Fluid, Diesel Exhaust Fluid, Water, Water - Wastewater Treatment, Water - Wastewater Transfer, Water, Automotive Undercoating
- Connection Type: Threaded
- Diaphragm Compatible Material: Santoprene
- Diaphragm Material: Santoprene
- Fluid Inlet Size (cm): 2.54
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 2.54
- Fluid Outlet Size (in): 1
- Fluid Outlet Size (mm): 25.4
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Material: Aluminum
- Manifold Configuration: End Port
Selectable operating setting
Reduces air consumption
Only use high pressure when required
- Wetted Components
For high pressure operation
- Low/High Pressure Operation Valve
Ease of maintenance
Stall and lube free
- Additional Diaphragm
Ease of maintenance
Reduced down-time (quick change time)
Spring loaded for faster change over
- Modular Air Valve
Increased fluid pressure without sacrificing flow
Low-high pressure mode valve lets you operate the pump as a standard AODD or a high pressure AODD
Reduce air consumption up to 50% with the low pressure mode
Same repair parts as the Husky 1050 diaphragm pump
- External Pilots
KIT, REPLACEMENT, HOSE, CPLD, QD
GG 24W830
KIT, REPLACEMENT, HOSE, CPLD, QD
Graco 24W830 Hose Replacement Kit
Piston pump to filter manifold hose, 1/4&Prime, QD
Application: Graco&prime, s dedication to delivering the highest quality products also allows you to protect your investment by offering products that can be repaired to ensure years of reliable service. Use Genuine Graco parts for the longest life, highest performance and best productivity.- Piston pump to filter manifold hose
KIT, OVERHAUL, CS, GL-33
GG 24W913
KIT, OVERHAUL, CS, GL-33
GL-33™ and GL-42™ Injectors and Accessories - GL33 Overhaul Kit, Carbon Steel For use with GL-33 and GL-42 Injectors.GL33 overhaul kit, carbon steel
Position Sensor Kit for E-Flo DC Motors
GG 24W920
Position Sensor Kit for E-Flo DC Motors
GH130 Hydraulic Airless Sprayer
GG 24W923
GH 130 SPRAYER, STD
Graco 24W923 GH 130 Convertible Standard Series Gas Hydraulic Airless Sprayer
The GH 130 Convertible is the clear choice for entry level contractors who demand maximum power in a small package. With the ability to change out the pump lower and convert to electric power without tools, you can be assured that you have the most versatile sprayer on the market today.
- Endurance Chromex Piston Pump
- Lasts 2X longer than the next leading brand
- QuikChange pump design allows you to swap the pump easily on the job
- Faster cleaning with the QuikAccess intake foot valve
- High-Efficiency Hydraulic Motor
- Rock-solid performance time after time keeps you up and running
- Faster, more responsive changeover
- O-ring sealed fittings and form-fitted hydraulic lines prevent leaks
- Fewer moving parts mean less maintenance and longer life
- High-Capacity Cooling System
- Innovative design allows the pump to run cooler and more efficiently
- Hydraulic reservoir is tapered on the bottom
- Provides easier and more thorough fluid changes
- Cooling fins on reservoir deflect heat away from sprayer
- Easy Out Pump Filter
- Easy maintenance & less clogging
- Exclusive inside-out filter design won't collapse to ensure a quality finish
- Vertical design for less mess
- Heavy-Duty Prime Valve
- Maintenance-free design withstands high-pressure dumping
- Rugged, Durable Cart Design
- Thick chrome over welded steel withstands rugged environments
- Full pneumatic wheels absorb impacts and vibrations
- Retractable handle doubles as coiled hose storage
- Tilts on its nose for service in the field
- Electric Motor Capability
- Indoor and outdoor use
- Quickly swap the gas engine for an electric motor in seconds - without tools
- Electric motor kit sold separately
- Ready to Work
Includes everything you need to get spraying:- Contractor Airless Spray Gun
- RAC X SwitchTips and Guard
- 50 feet of BlueMax II Airless Hose
- Model: GH
- Series: 130
- Product Series: Standard
- Compatible Electric Motor Kits: 288473, 288474 (CSA)
- Compatible Material: Acrylics, Paint, Primer
- Compatible Replacement Pump: 24B748
- Convertible: Yes
- Engine Brand: Honda
- Engine Size (HP): 4
- Features: Endurance Chromex Pump, High-Capacity Cooling System, Honda Engine, Easy Out Filter, Heavy-Duty Prime Valve, Durable Cart Design, Convertible
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Size (mm): 19.05
- Fluid Inlet Thread Type: MNPT
- Fluid Outlet Size (in): 3/8
- Fluid Outlet Size (mm): 3.75
- Fluid Outlet Thread Type: FNPT
- Frame Configuration: Cart
- Includes: Contractor Gun, RAC X LP 517 Spray Tip, RAC X WideRAC 1231 Spray Tip, RAC X Guard, 1/4 in x 50 ft BlueMax II Airless Hose, TSL 4 oz
- Maximum Flow Rate (GPM): 1.30
- Maximum Flow Rate (L/min): 4.9
- Maximum Hose Length (ft): 300
- Maximum Hose Length (m): 92
- Maximum Sound Pressure Level (dB(A)): 88
- Maximum Tip Size (in): 0.037
- Maximum Tip Size 1 Gun - Electric Motor (in): 0.031
- Maximum Tip Size 2 Guns - Electric Motor (in): 0.017
- Maximum Tip Size Gun 1 (in): 0.037
- Maximum Tip Size Gun 2 (in): 0.023
- Maximum Working Pressure (bar): 228
- Maximum Working Pressure (kPa): 2
GH 230 SPRAYER, STD
GG 24W929
GH 230 SPRAYER, STD
Graco 24W929 GH 230 Convertible Standard Series Gas Hydraulic Airless Sprayer
The GH 230 Convertible is the most versatile sprayer for the professional contractor looking for workhorse hydraulic performance for large commercial and residential construction jobs. Superior versatility with the ability to change out the pump lower and convert to electric power without tools.
Application: Graco GH Standard Series sprayers deliver durability and performance for spraying heavier materials in demanding applications. This sprayer is capable of handling elastomerics, block fillers, gypsum, and dry fall.- Endurance Chromex Piston Pump
Lasts 2X longer than the next leading brand
QuikChange pump design allows you to swap the pump easily on the job
Faster cleaning with the QuikAccess intake foot valve
- High-Efficiency Hydraulic Motor
Rock-solid performance time after time keeps you up and running
Faster, more responsive changeover
O-ring sealed fittings and form-fitted hydraulic lines prevent leaks
Fewer moving parts mean less maintenance and longer life
- High-Capacity Cooling System
Innovative design allows the pump to run cooler and more efficiently
Hydraulic reservoir is tapered on the bottom
Provides easier and more thorough fluid changes
Cooling fins on reservoir deflect heat away from sprayer
- Easy Out Pump Filter
Easy maintenance & less clogging
Exclusive inside-out filter design won&prime, t collapse to ensure a quality finish
Vertical design for less mess
- Heavy-Duty Prime Valve
Maintenance-free design withstands high-pressure dumping
- Rugged, Durable Cart Design
Thick chrome over welded steel withstands rugged environments
Full pneumatic wheels absorb impacts and vibrations
Retractable handle doubles as coiled hose storage
Tilts on its nose for service in the field
- Electric Motor Capability
Indoor and outdoor use
Quickly swap the gas engine for an electric motor in seconds – without tools
Electric motor kit sold separately
- Ready to Work
Includes everything you need to get spraying:Silver Plus Airless Spray Gun
RAC X SwitchTips and Guard
50 feet of BlueMax II Airless Hose
- Model: GH
- Series: 230
- Product Series: Standard
- Compatible Electric Motor Kits: 248949, 248950 (CSA)
- Compatible Material: Acrylics, Dry Fall, Drywall Mud, Elastomer, Gypsum, Paint, Primer
- Compatible Replacement Pump: 24W997
- Convertible: Yes
- Engine Brand: Honda
- Engine Size (HP): 6.5
- Features: Endurance Chromex Pump, High-Capacit
ENDURA-FLO PUMP, 4:1 AODD, 150, BSP, ADV
GG 24W350
ENDURA-FLO PUMP, 4:1 AODD, 150, BSP, ADV
Endura-Flo 4D150, 4:1 Air Operated Diaphragm Pump, 150cc, BSPP, DataTrak The Endura-Flo 4D offers the industry’s highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money. Endure-Flo diaphragms last longer against extreme operating conditions Easy access to critical components for fast online maintenance Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money Minimal solvent to flush and consistent startup pressure make it perfect for multiple color change and piggable systems Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges DataTrek option prevents runaway and tracks material usage
Quick Disconnect Solenoid Kit
GG 24X038
KIT, SOLENOID
Graco 24X038 Quick Disconnect Solenoid Kit
KIT INCLUDES: SOLENOID, QUICK DISCONNECT [QTY. 1], LUBRICANT, GREASE, 3GRAM [QTY. 1], FITTING, M6 PUSH-2-CON, M7 [QTY. 1], FITTING, TUBE, UNEQUAL 3/8 TO 1/4 [QTY. 1], TUBE, POLYURETHANE, RD [QTY. 1]
Seal Repair Kit, Upper and Lower, T2
GG 24X056
Seal Repair Kit, Upper and Lower, T2
LSR F4-55 SYSTEM, 55GAL/55GAL, CASTERS
GG 24X167
LSR F4-55 SYSTEM, 55GAL/55GAL, CASTERS
1:1 Ratio 55 gal (200 liter) F4 Fluid Automation System with CastersIn the manufacturing of liquid silicone rubber products, precision is paramount. Material waste is an expensive problem and substandard products are an intolerable failure. Minimize both with the Graco Fluid Automation F4-55.
Ideal for manufacturing in the following industries: medical, infant care, consumer products, automotive, industrial parts, wearables.Precise ratio control, minimal material waste
- The F4-55 system takes the ability to meter material flow to an almost microscopic level. Its helical gear uses multiple gear teeth to measure flow in very small increments. The increased number of measurements offers more assurance the machine remains on-ratio.
- The result: More precise mixing, a better end product and less wasted material.
Easier operation with Graco Control Architecture
- The Graco Fluid Automation F4-55 system features intuitive user interfaces based on the Graco Control Architecture (GCA), a modular system of processing and control components. GCA makes maintenance and service easy, thanks to built-in troubleshooting tools
Better Color Control
- Mix two additive streams at ratios ranging from 0.5 to 6%
Easy Set-up and Operation
- Proprietary Graco Control Architecture (GCA) is user friendly, providing easier operation and troubleshooting
Maintains Material Integrity
- Stainless steel components meet the standard for clean room applications to prevent contamination, and cure inhibition and discoloration of material
Cleanroom Convenience
- A smaller footprint and casters (optional on F4-55) allow for system movement and maintenance
LSR F4-5 SYSTEM, 5GAL/5GAL
GG 24X160
LSR F4-5 SYSTEM, 5GAL/5GAL
Graco 24X160 1:1 Ratio 5 gal (20 liter) F4 Fluid Automation System with Casters
In the manufacturing of liquid silicone rubber products, precision is paramount. Material waste is an expensive problem and substandard products are an intolerable failure. Minimize both with the Graco Fluid Automation F4-5.
Application: Ideal for manufacturing in the following industries: medical, infant care, consumer products, automotive, industrial parts, wearables.- Precise ratio control, minimal material waste
- Easier operation with Graco Control Architecture
- Better Color Control
- Maintains Material Integrity
- Cleanroom Convenience
A smaller footprint and casters (optional on F4-5) allow for system movement and maintenance
- Model: LSR
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Amperage (A): 4
- Applicator Type: Automatic
- Frequency (Hz): 50/60
- Maximum Flow Rate (kg/min): 2.3
- Maximum Flow Rate (lb/min): 5
- Maximum Working Pressure (bar): 207
- Maximum Working Pressure (kPa): 20700
- Maximum Working Pressure (MPa): 21
- Maximum Working Pressure (psi): 3000
- Minimum Flow Rate (GPM): 10
Stainless steel components meet the standard for clean room applications to prevent contamination, and cure inhibition and discoloration of material
- Cleanroom Convenience
Mix two additive streams at ratios ranging from 0.5 to 6%
- Maintains Material Integrity
The Graco Fluid Automation F4-5 system features intuitive user interfaces based on the Graco Control Architecture (GCA), a modular system of processing and control components. GCA makes maintenance and service easy, thanks to built-in troubleshooting tools
- Better Color Control
The F4-5 system takes the ability to meter material flow to an almost microscopic level. Its helical gear uses multiple gear teeth to measure flow in very small increments. The increased number of measurements offers more assurance the machine remains on-ratio.
The result: More precise mixing, a better end product and less wasted material.
- Easier operation with Graco Control Architecture
LSR F4-55-5 SYSTEM, LSR55-5GAL/55-5GAL, CSTERS
GG 24X166
LSR F4-55-5 SYSTEM, LSR55-5GAL/55-5GAL, CSTERS
Graco 24X166 1:1 Ratio 5 gal (20 liter) F4 Fluid Automation System with Casters
In the manufacturing of liquid silicone rubber products, precision is paramount. Material waste is an expensive problem and substandard products are an intolerable failure. Minimize both with the Graco Fluid Automation F4-55.
Application: Ideal for manufacturing in the following industries: medical, infant care, consumer products, automotive, industrial parts, wearables.- Precise ratio control, minimal material waste
- Easier operation with Graco Control Architecture
- Better Color Control
- Maintains Material Integrity
- Cleanroom Convenience
A smaller footprint and casters (optional on F4-55) allow for system movement and maintenance
- Model: LSR
- Air Inlet Size (cm): 1.27
- Air Inlet Size (in): 1/2
- Air Inlet Size (mm): 12.7
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Amperage (A): 4
- Applicator Type: Automatic
- Frequency (Hz): 50/60
- Maximum Flow Rate (kg/min): 2.27
- Maximum Flow Rate (lb/min): 5
- Maximum Working Pressure (bar): 207
- Maximum Working Pressure (kPa): 20700
- Maximum Working Pressure (MPa): 21
- Maximum Working Pressure (psi): 3000
- Minimum Flow Rate (GPM): 10
Stainless steel components meet the standard for clean room applications to prevent contamination, and cure inhibition and discoloration of material
- Cleanroom Convenience
Mix two additive streams at ratios ranging from 0.5 to 6%
- Maintains Material Integrity
The Graco Fluid Automation F4-55 system features intuitive user interfaces based on the Graco Control Architecture (GCA), a modular system of processing and control components. GCA makes maintenance and service easy, thanks to built-in troubleshooting tools
- Better Color Control
The F4-55 system takes the ability to meter material flow to an almost microscopic level. Its helical gear uses multiple gear teeth to measure flow in very small increments. The increased number of measurements offers more assurance the machine remains on-ratio.
The result: More precise mixing, a better end product and less wasted material.
- Easier operation with Graco Control Architecture
LSR F4-55 SYSTEM, 55GAL/55GAL
GG 24X169
LSR F4-55 SYSTEM, 55GAL/55GAL
1:1 Ratio 55 gal (200 liter) F4-55 Fluid Automation SystemIn the manufacturing of liquid silicone rubber products, precision is paramount. Material waste is an expensive problem and substandard products are an intolerable failure. Minimize both with the Graco Fluid Automation F4-55.
Ideal for manufacturing in the following industries: medical, infant care, consumer products, automotive, industrial parts, wearables.Precise ratio control, minimal material waste
- The F4-55 system takes the ability to meter material flow to an almost microscopic level. Its helical gear uses multiple gear teeth to measure flow in very small increments. The increased number of measurements offers more assurance the machine remains on-ratio.
- The result: More precise mixing, a better end product and less wasted material.
Easier operation with Graco Control Architecture
- The Graco Fluid Automation F4-55 system features intuitive user interfaces based on the Graco Control Architecture (GCA), a modular system of processing and control components. GCA makes maintenance and service easy, thanks to built-in troubleshooting tools
Better Color Control
- Mix two additive streams at ratios ranging from 0.5 to 6%
Easy Set-up and Operation
- Proprietary Graco Control Architecture (GCA) is user friendly, providing easier operation and troubleshooting
Maintains Material Integrity
- Stainless steel components meet the standard for clean room applications to prevent contamination, and cure inhibition and discoloration of material
Cleanroom Convenience
- A smaller footprint and casters (optional on F4-55) allow for system movement and maintenance
Sensor Assy, G3000
GG 24W651
SENSOR, ASSEMBLY, G250/G3000
Graco 24W651 Electronic Sensor, G250/G3000
KIT, REPLACEMENT, PP, POP-UP HEA
GG 24X764
KIT, REPLACEMENT, PP, POP-UP HEA
This item is no longer available. Please contact Graco Customer Service for replacement options.
HEAD, MOLSA, 100-1.04MM/4-.041IN
GG 24X663
HEAD, MOLSA, 100-1.04MM/4-.041IN
MOLSA Head, 4 inches (100 mm) wide, 0.041 inch (1.04 mm) orifice diameterMulti-Orifice Linear Stream Applicator (MOLSA) gives you faster cycle rates, more accurate dispensing and longer production life compared to competitive offerings.
Ideal for applying liquid applied sound deadener (LASD) using the Graco 1K Ultra-Lite dispense valve.
Port Plug Model
4.00 inches (102 mm) wide
0.041 inch (1.04 mm) orifice diameter
GL-1 XL INJECTOR, 2 POINT
GG 24X812
GL-1 XL INJECTOR, 2 POINT
Graco 24X812 GL-1™ XL Grease Injector, Two Point
Custom fit your system with Graco&prime, s adjustable GL-1 series grease injectors. Designed to meet the needs of each lube point, these systems provide years of reliable operation in the harshest operating environments.
Application: High volume output at high pressures for the most demanding applications- The GL-1 XL injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications
- Includes an adjustable hex head nut to make adjusting the output simple
- No vent holes and fully enclosed press fittings to prevent leaking lubricant
- Rugged, single piece uni-body design built for the harshest environments
- Model: GL-1
- Series: XL
- Adjustable: Adjustable
- Application: In-Plant Machinery, Off-Road Equipment
- Compatible Material: Grease
- Compatible Metering Device: Single Line Parallel
- Cycle Indicator: Visual
- Dispense Outlet Size (cm): 0.33
- Dispense Outlet Size (in): 0.13
- Dispense Outlet Size (mm): 3.3
- Dispense Outlet Thread Type: NPT
- For Use With: Single Line Parallel Automatic Lubrication Systems
- Inlet Size (cm): 0.9525
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.525
- Inlet Thread Type: NPT
- Maximum NLGI Grade: #2
- Maximum Operating Pressure (psi): 6000
- Maximum Output Volume (in³): 0.315
- Maximum Reset Pressure (psi): 1000
- Maximum Working Pressure (bar): 414
- Maximum Working Pressure (kPa): 41400
- Maximum Working Pressure (MPa): 41.4
- Maximum Working Pressure (psi): 6000
- Minimum Operating Pressure (psi): 1850
- Minimum Output Volume (in³): 0.035
- Outlet Size (cm): 0.9525
- Outlet Size (in): 3/8
- Outlet Size (mm): 9.525
- Outlet Thread Type: NPT
Kit, Gun, Cable
GG 24X827
KIT, GUN, CABLE
Graco 24X827 Pro Xpc Auto Spray Head Kit for models LC1020 and LC2020
CHEMSAFE PUMP, 515PT-P01A-PT3-PT-PT-PO-P
GG 24X425
CHEMSAFE PUMP, 515PT-P01A-PT3-PT-PT-PO-P
ChemSafe 515 Air Operated Double Diaphragm Plastic Pump with PTFE Seat, PTFE Ball, Overmolded PTFE Diaphragm, PTFE Fluid Path & NPT PortGraco's ChemSafe pumps feature PTFE or UHMWPE (ultra high molecular weight polyethylene) corrosion-resistant fluid paths, which make them ideal for corrosive and abrasive chemicals. There's no exposed metals and they can be configured in various materials to meet most abrasion, temperature, and chemical compatibility requirements. Plus they're dead-head capable and achieve high flow rates while minimizing air consumption and operational noise.
Max flow rate of 16.6 gpm (63 lpm) High quality machined design provides a precision fit and superior chemical containment compared to molded pumps Corrosion-resistant exterior with no exposed metal reduces maintenance, extends pump life and offers clean, safe operation Removable air motor offers easy and intuitive maintenance ensuring maximum pump performance and availability Ideal for corrosive and abrasive liquids such as acids, fuels, glues, paints, resins, inks, or wastewater
GL-1 XL INJECTOR, REPLACEMENT
GG 24X817
GL-1 XL INJECTOR, REPLACEMENT
GL-1™ XL Grease Injector, ReplacementCustom fit your system with Graco's adjustable GL-1 series grease injectors. Designed to meet the needs of each lube point, these systems provide years of reliable operation in the harshest operating environments.
High volume output at high pressures for the most demanding applications The GL-1 XL injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications Includes an adjustable hex head nut to make adjusting the output simple No vent holes and fully enclosed press fittings to prevent leaking lubricant Convenient top-mounted cycle pin indicator for quick confirmation that the injector is functioning properly Rugged, single piece uni-body design built for the harshest environments
CHEMSAFE PUMP, 307PT-P01A-PT3-PT-PT-PO
GG 24X427
CHEMSAFE PUMP, 307PT-P01A-PT3-PT-PT-PO
ChemSafe 307 Air Operated Double Diaphragm Plastic Pump with PTFE Seat, PTFE Ball, Overmolded PTFE Diaphragm, PTFE Fluid Path & NPT PortGraco's ChemSafe pumps feature PTFE or UHMWPE (ultra high molecular weight polyethylene) corrosion-resistant fluid paths, which make them ideal for corrosive and abrasive chemicals. There's no exposed metals and they can be configured in various materials to meet most abrasion, temperature, and chemical compatibility requirements. Plus they're dead-head capable and achieve high flow rates while minimizing air consumption and operational noise.
Max flow rate of 7.9 gpm (30 lpm) High quality machined design provides a precision fit and superior chemical containment compared to molded pumps Corrosion-resistant exterior with no exposed metal reduces maintenance, extends pump life and offers clean, safe operation Removable air motor offers easy and intuitive maintenance ensuring maximum pump performance and availability Ideal for corrosive and abrasive liquids such as acids, fuels, glues, paints, resins, inks, or wastewater
CHEMSAFE PUMP, 205PT-P01A-PT3-PT-PT-PO
GG 24X429
CHEMSAFE PUMP, 205PT-P01A-PT3-PT-PT-PO
Graco 24X429 ChemSafe 205 Air Operated Double Diaphragm Plastic Pump with PTFE Seat, PTFE Ball, Overmolded PTFE Diaphragm, PTFE Fluid Path & NPT Port
Graco&prime, s ChemSafe pumps feature PTFE or UHMWPE (ultra high molecular weight polyethylene) corrosion-resistant fluid paths, which make them ideal for corrosive and abrasive chemicals. There&prime, s no exposed metals and they can be configured in various materials to meet most abrasion, temperature, and chemical compatibility requirements. Plus they&prime, re dead-head capable and achieve high flow rates while minimizing air consumption and operational noise.
- Max flow rate of 3.6 gpm (14 lpm)
- High quality machined design provides a precision fit and superior chemical containment compared to molded pumps
- Corrosion-resistant exterior with no exposed metal reduces maintenance, extends pump life and offers clean, safe operation
- Ideal for corrosive and abrasive liquids such as acids, fuels, glues, paints, resins, inks, or wastewater
- Model: ChemSafe
- Series: 205
- Air Inlet Size (in): 1/8
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Ball Material: PTFE
- Center Section Material: Polypropylene
- Compatible Material: Antifreeze, Detergent, Gel-Coat, Asphalt, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Water - Wastewater Treatment, Water - Wastewater Transfer, Food and Personal Care, Ink
- Connection Type: Threaded
- Diaphragm Compatible Material: PTFE
- Diaphragm Material: PTFE Overmold
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 0.635
- Fluid Outlet Size (in): 1/4
- Fluid Outlet Size (mm): 6.35
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Material: PTFE
- Manifold Configuration: Center Port
- Manifold O-Ring Material: PTFE
- Material: PTFE
- Maximum Air Consumption (SCFM): 4.8
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Cycle Rate (CPM): 375
- Maximum Flow Rate (GPM): 2.5
- Maximum Flow Rate (L/min): 9.5
- Maximum Fluid Pressure (bar): 7
- Maximum Fluid Pressure (kPa): 700
- Maximum Fluid Pressure (MPa): 0.7
- Maximum Fluid Pressure (psi): 100
- Maximum Fluid Pressure (bar): 7
- Maximum Fluid Pressure (kPa): 700
- Maximum Fluid Pressure (MPa): 0.7
- Maximum Fluid Pressure (psi): 100
- Maximum Operating Temperature (°C): 100
- Maximum Operating Temperature (°F): 212
- Maximum Solid Size (cm): 0.15
- Maximum Solid Size (in): 0.06
- Maximum Solid Size (mm): 1.5
- Minimum Operating Temperature (°C): 0
- Minimum Operating Temperature (°F):
CHEMSAFE PUMP, 1590PT-P01A-PT3-PT-PT-PO
GG 24X421
CHEMSAFE PUMP, 1590PT-P01A-PT3-PT-PT-PO
ChemSafe 1590 Air Operated Double Diaphragm Plastic Pump with NPT PortGraco's ChemSafe pumps feature PTFE or UHMWPE (ultra high molecular weight polyethylene) corrosion-resistant fluid paths, which make them ideal for corrosive and abrasive chemicals. There's no exposed metals and they can be configured in various materials to meet most abrasion, temperature, and chemical compatibility requirements. Plus they're dead-head capable and achieve high flow rates while minimizing air consumption and operational noise.
Max flow rate of 85.2 gpm (322 lpm) High quality machined design provides a precision fit and superior chemical containment compared to molded pumps Corrosion-resistant exterior with no exposed metal reduces maintenance, extends pump life and offers clean, safe operation Removable air motor offers easy and intuitive maintenance ensuring maximum pump performance and availability Ideal for corrosive and abrasive liquids such as acids, fuels, glues, paints, resins, inks, or wastewater
CHEMSAFE PUMP, 1590UH-P01A-UH3-UH-PT-PO
GG 24X485
CHEMSAFE PUMP, 1590UH-P01A-UH3-UH-PT-PO
Graco 24X485 ChemSafe™ 1590 Air Operated Double Diaphragm Plastic Pump
- Model: ChemSafe
- Series: 1590
- Air Inlet Size (in): 1/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Ball Material: PTFE
- Center Section Material: Polypropylene
- Compatible Material: Antifreeze, Detergent, Gel-Coat, Asphalt, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Water - Wastewater Treatment, Water - Wastewater Transfer, Food and Personal Care, Ink
- Connection Type: Threaded
- Diaphragm Compatible Material: PTFE
- Diaphragm Material: PTFE Overmold
- Fluid Inlet Size (cm): 3.81
- Fluid Inlet Size (in): 1-1/2
- Fluid Inlet Size (mm): 38.1
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 3.81
- Fluid Outlet Size (in): 1-1/2
- Fluid Outlet Size (mm): 38.1
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Material: UHMWPE
- Manifold Configuration: Center Port
- Manifold O-Ring Material: PTFE
- Material: UHMWPE
- Maximum Air Consumption (SCFM): 46
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Cycle Rate (CPM): 230
- Maximum Flow Rate (GPM): 100
- Maximum Flow Rate (L/min): 379
- Maximum Fluid Pressure (bar): 7
- Maximum Fluid Pressure (kPa): 700
- Maximum Fluid Pressure (MPa): 0.7
- Maximum Fluid Pressure (psi): 100
- Maximum Fluid Pressure (bar): 7
- Maximum Fluid Pressure (kPa): 700
- Maximum Fluid Pressure (MPa): 0.7
- Maximum Fluid Pressure (psi): 100
- Maximum Operating Temperature (°C): 70
- Maximum Operating Temperature (°F): 158
- Maximum Solid Size (cm): 203
- Maximum Solid Size (in): 80
- Maximum Solid Size (mm): 2030
- Minimum Operating Temperature (°C): 0
- Minimum Operating Temperature (°F): 32
- Minimum Storage Temperature (°C): 0
- Minimum Storage Temperature (°F): 32
- Power Source: Air
Gun, P2, Automatic
GG 24X636
P2 EXTREME GUN,AUTOMATIC
Graco 24X636 Automatic Probler P2 Extreme Dispense Gun
The Probler P2 Extreme Gun is lightweight and easy to mount to automation platforms - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of mix chamber movement. The Probler P2 Extreme reduces maintenance, increases spraying uptime and is easy to use in high production environments.
Application: For high output spray polyurethane foam and polyurea applications
The P2 Extreme elite:
- Extreme wear stainless steal side blox and mix chamber housings
- Alternate side block hose routings
- Allows filters to be easily removed
Easy daily maintenance
Easy-to-replace mix chamber insert
Anti-crossover design virtually eliminates possibility of material entering the air piston
- Application: Foam, Polyurea
- Compatible Material: Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC
CHEMSAFE PUMP, 1040PT-P01A-PT3-PT-PT-PO
GG 24X423
CHEMSAFE PUMP, 1040PT-P01A-PT3-PT-PT-PO
ChemSafe 1040 Air Operated Double Diaphragm Pump with PTFE Seat, PTFE Ball, Overmolded PTFE Diaphragm, PTFE Fluid Path & NPT PortGraco's ChemSafe pumps feature PTFE or UHMWPE (ultra high molecular weight polyethylene) corrosion-resistant fluid paths, which make them ideal for corrosive and abrasive chemicals. There's no exposed metals and they can be configured in various materials to meet most abrasion, temperature, and chemical compatibility requirements. Plus they're dead-head capable and achieve high flow rates while minimizing air consumption and operational noise.
Max flow rate of 37.5 gpm (142 lpm) High quality machined design provides a precision fit and superior chemical containment compared to molded pumps Corrosion-resistant exterior with no exposed metal reduces maintenance, extends pump life and offers clean, safe operation Removable air motor offers easy and intuitive maintenance ensuring maximum pump performance and availability Ideal for corrosive and abrasive liquids such as acids, fuels, glues, paints, resins, inks, or wastewater
Kit, Encoder, 1000PPR, 10mm
GG 24X448
KIT, ENCODER, 1000PPR, 10MM
Graco 24X448 Encoder 1000Ppr 10Mm Kit
KIT INCLUDES: ENCODER, INCREMENTAL [QTY. 1], CABLE, M12, 8-PIN, 10.0M [QTY. 1], SCREW, MACHINE [QTY. 3], BRACKET, MOUNTING, ENCODER [QTY. 1]
