GRACO INC. S10595
GRACO INC. S10595 branded products
KIT, ACCY, SILVER PLUS GUN, GH83
GG 287850
GG 287850
KIT, ACCY, SILVER PLUS GUN, GH83
Get up and spraying quickly with the industry’s preferred spray gun for high-pressure applications and needed accessories. Keep a spare kit on hand to always be prepared for large projects where dual gun applications are required.
- Silver Plus Gun
Lightweight, Rugged Design
Exclusive Needle Design
2-Finger Trigger Design and Handle
Stainless Steel Fluid Tube
- RAC X LTX 517 & 655 SwitchTips
Provides a 10 inch and 12 inch spray patterns
Ideal for larger surfaces such as houses/buildings, walls and ceilings
100% tested for flow rate
- BlueMax II Airless Hoses
The lightest, most flexible hoses on the market
Easy to connect and maintain
The highest level of performance from the sprayer to the gun
- Model: Silver Plus
$971.00
RAC 5 TIP, SPRAY
GG 286729
GG 286729
RAC 5 TIP, SPRAY
Graco 286729 RAC 5 SwitchTip, 729
The Reverse-A-Clean (RAC) 729 RAC 5 SwitchTip produces a 14 to 16 inch fan and has a 0.029 inch orifice. Reverse the SwitchTip to easily clear clogs.
- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Lacquer to Mastic, Latex Paint
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 40.6
- Maximum Fan Width (in): 14
- Maximum Fan Width (mm): 406
- Maximum Flow Rate (GPM): 0.9
- Maximum Flow Rate (L/min): 3.41
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 14
- Minimum Fan Width (mm): 356
- Orifice Diameter (in): 0.029
- Pattern Size (in): 14 to 16
- Pattern Size (mm): 355.6 to 406.4
$62.75
KING SPRAYER, 40:1, D-ICE, HD, COMP, AA
GG 287976
GG 287976
KING SPRAYER, 40:1, D-ICE, HD, COMP, AA
Heavy-Duty Cart Mounted AA Spray Package with 40:1 Mix Ratio and XL Air Motor with DataTrak High-quality, high-volume, high-pressure. The Graco King pneumatic airless sprayers are the most powerful machines for protective coatings. The system provides the applicator output values, pressure ratios and pumping capacities never seen before. The Graco King units are designed to withstand the harshest environmental conditions and easily handle the toughest protective coatings and corrosion control applications. With 10 different ratios available, there is a sprayer with the correct pressure and flow characteristics for your application. Superior air-operated pumps for high-volume and high-pressure waterproofing, fireproofing and protective coatingsSimple Maintenance
- This air motor has 50% less parts when compared to the NXT valve, making maintenance and troubleshooting easy.
- All motor parts are easily accessible and require simple maintenance
Improved Icing Performance
- The newly designed poppets and external pilot lines virtually eliminate pilot valve freezing that can result in an instant stop.
- The icing potential has been reduced by up to 70%
Less Pulsation
- With more than 145% higher exhaust capacity in the air valve, you'll achieve a faster, smoother changeover.
- Eliminating the "wink" in your pattern - it is a difference you will feel.
New MaxLife Pump Lowers
- Improved sealing and strength with the improved edge loading and seven throat pickings instead of five. The new MaxLife pump Lowers are designed for the most demanding jobs, providing unmatched durability and life.
New Air Motor
- Multi gun capabilities Graco’s powerful new air motor lets you use multiple guns with almost no perceivable pulsation. A new manifold has been designed to simplify the installation of multiple guns.
$11,730.00
RAC 5 TIP, SPRAY
GG 286635
GG 286635
RAC 5 TIP, SPRAY
Graco 286635 RAC 5 SwitchTip, 635
The Reverse-A-Clean (RAC) 635 RAC 5 SwitchTip produces a 12 to 14 inch fan and has a 0.035 inch orifice. Reverse the SwitchTip to easily clear clogs.
Application: Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Elastomer, Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 35.6
- Maximum Fan Width (in): 12
- Maximum Fan Width (mm): 356
- Maximum Flow Rate (GPM): 1.31
- Maximum Flow Rate (L/min): 4.96
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 12
- Minimum Fan Width (mm): 305
- Orifice Diameter (in): 0.035
$62.75
Gun Auto Air-Assisted Reverse-A-Clean
GG 288053
GG 288053
Gun Auto Air-Assisted Reverse-A-Clean
Call for pricing
Kit, Repair, Air Seal, Low Psi
GG 288171
GG 288171
KIT, REPAIR,AIR SEAL,LOW PSI
Graco 288171 Air Seal Repair Kit
$190.50
Manifold, Rear Fitting, Inch
GG 288160
GG 288160
MANIFOLD, REAR FITTING, INCH
Graco 288160 Rear port manifold, North America
$537.00
REGULATOR, BACK PRESSURE
GG 288117
GG 288117
REGULATOR, BACK PRESSURE
Graco 288117 Pneumatic Corrosion Resistant Fluid Back Pressure Regulator, 20 gpm, 300 psi max fluid pressure, 1-1/4 npt inlet/outlet, with gauge
- PTFE/Elastomer hybrid diaphragm withstands wear while maintaining accurate responsiveness
- Stainless steel wetted materials are compatible with catalyst and waterborne materials
- Hardened stainless steel seat ensure low wear and long life
- Air operated for remote automated control to eliminate operator interference
- Compatible Material: Catalyst, Waterborne
- Gauge Port Size (cm): 0.635
- Gauge Port Size (in): 1/4
- Gauge Port Size (mm): 6.35
- Gauge Port Type: NPT
- Includes: Gauge
- Inlet Size (cm): 3.175
- Inlet Size (in): 1-1/4
- Inlet Size (mm): 31.75
- Inlet Thread Type: NPT
- Maximum Air Inlet Pressure (bar): 6.9
- Maximum Air Inlet Pressure (kg/cm²): 7.03
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Flow Rate (GPM): 20
- Maximum Flow Rate (L/min): 75.7
- Maximum Regulated Pressure (bar): 17.2
- Maximum Regulated Pressure (kPa): 1720
- Maximum Regulated Pressure (psi): 250
- Maximum Viscosity (cP): 1000
- Maximum Working Pressure (bar): 21
- Maximum Working Pressure (kPa): 2100
- Maximum Working Pressure (psi): 300
- Minimum Regulated Pressure (bar): 1.7
- Minimum Regulated Pressure (kPa): 170
- Minimum Regulated Pressure (MPa): 0.017
- Minimum Regulated Pressure (psi): 25
- Outlet Size (cm): 3.175
- Outlet Size (in): 1-1/4
- Outlet Size (mm): 31.75
- Outlet Thread Type: NPT
$2,400.00
Kit, Repair, Fluid, Aa
GG 288136
GG 288136
KIT, REPAIR,FLUID,AA
Graco 288136 Fluid Repair Kit for Automatic G40 Air-Assisted Spray Guns
$107.50
Kit, Needle Assy, Carb/Carb
GG 288191
GG 288191
KIT, NEEDLE ASSY, CARB/CARB
Graco 288191 Fluid Needle, carbide ball, standard viscosity/standard flow
$239.00
Kit, Needle Assy (Sst/Delrin)
GG 288190
GG 288190
KIT, NEEDLE ASSY (SST/DELRIN)
Graco 288190 Fluid Needle, SST ball, acid catalyzed materials/very low viscosity materials
$239.00
Kit, Diffuser Airless
GG 288196
GG 288196
KIT, DIFFUSER AIRLESS
Graco 288196 Ball Seat Diffuser- 3/16 in
$95.25
Kit, Aircap Assy, H.P.
GG 288194
GG 288194
KIT, AIRCAP ASSY, H.P.
Graco 288194 Standard Air Cap used with AAP, GG4, GG5, and AAM Series
- Compatible Material: Solvents, Paint, Coating, Lubrication-Fluid
$155.00
Kit, Diffuser Assy
GG 288192
GG 288192
KIT, DIFFUSER ASSY
Graco 288192 Diffuser-Seat, carbide seat, standard viscosity/standard flow
$120.00
Manifold, Bottom Inlet (In)
GG 288221
GG 288221
MANIFOLD, BOTTOM INLET (IN)
Graco 288221 Manifold with bottom fluid ports
$428.00
Manifold, Adjustable, Delta, High Prs
GG 288224
GG 288224
MANIFOLD, ADJUSTABLE,DELTA,HIGH PRS
Graco 288224 High Pressure Air Assisted Manifold with side fluid ports and manual fan adjustment valve
$428.00
AL AUTO GUN, AIRLESS AUTO
GG 288048
GG 288048
AL AUTO GUN, AIRLESS AUTO
AL Automatic Airless Spray Gun, includes GG0 spray tip of choiceA compact, lightweight automatic spray gun design that increases production speeds and provides a quality finish with a low cost of ownership.
Achieve quality finishes and higher production speeds for general metal finishing applications. Lightweight and compact rounded gun design Capable of handling high production speeds Durable stainless steel construction handles the toughest materials Fewer parts means an overall lower cost of repair Wide range tip line for a variety of applications
$1,300.00
Manifold, Adjustable, Delta, Low Prs
GG 288223
GG 288223
MANIFOLD, ADJUSTABLE,DELTA,LOW PRS
Graco 288223 North America Low Pressure Manifold with side fluid ports and fan adjustment valve
$438.00
Kit, Rod, Displacement
GG 24C507
GG 24C507
KIT, ROD,DISPLACEMENT
Graco 24C507 Stainless Steel Rod for Sever-Duty, Stainless Steel Displacement Pump, Series B, Model 223842
$883.00
Kit, Sleeve, Housing
GG 24C500
GG 24C500
KIT, SLEEVE,HOUSING
Graco 24C500 Stainless Steel Housing Sleeve Kit
$1,225.00
Kit, Cylinder, Pump, Disp
GG 24C505
GG 24C505
KIT, CYLINDER,PUMP,DISP
Graco 24C505 Stainless Steel Cylinder for Short Stroke Displacement Pump, Series B
$693.00
AGITATOR, LOW VISCOSITY
GG 24C728
GG 24C728
AGITATOR, LOW VISCOSITY
Air Driven Expanding Blade Bung-Mounted Agitator, Low Viscosity Low viscosity (1,000 cps) air driven expanding blade bung-mounted agitator Corrosion resistant materials increase durability Threads into 1.5- or 2-inch drum bung Angled adapter reduces vortexing and allows for off-center mounting Customize configuration by adjusting blade height or by adding blade assemblies Collapsible blades fit through drum bung and expand when spinning for efficient mixing Low Viscosity (1,000 cps)
$1,390.00
AGITATOR, HIGH VISCOSITY
GG 24C729
GG 24C729
AGITATOR, HIGH VISCOSITY
Graco 24C729 Air Driven Expanding Blade Bung-Mounted Agitator, High Viscosity
High viscosity (2,000 cps) air driven expanding blade bung-mounted agitator
- Corrosion resistant materials increase durability
- Threads into 1.5- or 2-inch drum bung
- Angled adapter reduces vortexing and allows for off-center mounting
- Collapsible blades fit through drum bung and expand when spinning for efficient mixing
- High Viscosity (2,000 cps)
- Air Inlet Size (cm): 0.3175
- Air Inlet Size (in): 1/8
- Air Inlet Size (mm): 3.175
- Air Inlet Thread Type: NPT
- For Use With: Drums with 2 inch Bung
- Includes: Angled Adapter
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 70
- Maximum Air Inlet Pressure (psi): 100
- Maximum Speed (RPM): 500
- Maximum Viscosity (cP): 2000
- Maximum Working Pressure (bar): 7
- Maximum Working Pressure (kPa): 700
- Maximum Working Pressure (psi): 100
- Motor Type: Pneumatic - Rotary Vane
- Power Rating (HP): 1.75
$1,490.00
KIT, ORIFICE, ADJ, 1/4, 016
GG 24C805
GG 24C805
KIT, ORIFICE, ADJ, 1/4, 016
Graco 24C805 250 Model Polyol Orifice Kit with 0.016 in (0.41 mm) Impingement Port Size
KIT INCLUDES: HOUSING, ORIFICE, EP, 0.011 [QTY. 1 ], O-RING, [QTY. 1 ], O-RING, VITON ETP, 011, 90A [QTY. 1 ], PACKING, O-RING [QTY. 1 ], STEM, VALVE [QTY. 1 ], RING, BACKUP, PTFE [QTY. 1 ], O-RING, [QTY. 1 ], LUBRICANT, GREASE [QTY. 1 ], CAP, ORIFICE, EP [QTY. 1 ], TOOL, CLEANOUT, #78 [QTY. 1 ]
- Model: EP
- Connection Type: Threaded
- For Use With: EP250 Pour Gun
- Includes: Housing, Stem, Cap, O-rings, Clean-out tool
- Orifice Diameter (in): 0.0162
- Pattern Size (in): 0.016
- Pattern Size (mm): 0.4064
$272.50
Kit, Agitator, Sub Assembly
GG 24C821
GG 24C821
KIT, AGITATOR, SUB ASSEMBLY
Graco 24C821 Drum Agitator Kit Assembly
$2,000.00
Kit, Guard, Rac X, Aa
GG 24C921
GG 24C921
KIT, GUARD, RAC X, AA
Graco 24C921 G15/ G40 Spray Gun RAC Air Cap
$140.00
Auto EP™ Gun with 0.031 in Orifice Size
GG 24C932
GG 24C932
EP GUN,250,031,AUTO
Graco 24C932 Auto EP Gun with 0.031 in Orifice Size
The Graco EP Pour Gun is truly an innovative advancement for the polyurethane processing industry. Here's why. First of all, it's engineered with technology that allows for on-site rebuilds. Which means significantly less downtime and no more expensive backup mixheads. Second, it's affordable, with a low initial investment. Best of all, the Graco EP Pour Gun provides accurate on-ratio dispensing and handles a variety of materials.
Application: Polyurethane mixhead for open pour and closed-mold injection applications
Low initial investment
Easy do-it-yourself mixhead rebuilds
Delivers repeatable, accurate shots
Accurate, on-ratio dispensing
Lightweight
Responsive trigger delivers repeatable, accurate shots
Offers both manual and automated application modes
For open pour applications and closed-mold injection
Compatible with Graco HFR Metering System, Reactor IP-25 and Reactor IP-40
- Application: Rigid Polyurethane, Flexible Polyurethane
$8,060.00
KIT, TRIGGER, 2K DISPENSE VALVE
GG 24D049
GG 24D049
KIT, TRIGGER, 2K DISPENSE VALVE
Graco 24D049 2K Trigger Switch Dispense Valve
KIT INCLUDES: CABLE, EUROFAST, TRIGGER [QTY. 1 ], CONNECTOR, RELIEF 1/4NPT [QTY. 1 ], PLUG, AIR VALVE [QTY. 1 ], SPACER, SWITCH [QTY. 1 ], SWITCH, ELECT MINI SNAP ACTION [QTY. 1 ], TUBE, HEAT SHRINK [QTY. 0.08 ]
- Model: EP
- For Use With: EP Gun
- Product Type: Switch Repair Kit
$424.00
Kit, Rod, Displacement
GG 24C506
GG 24C506
KIT, ROD,DISPLACEMENT
Graco 24C506 Stainless Steel Displacement Pump Rod
$782.00
Hose, Dual, 1:1, 3/8X3/8, 50', Cs
GG 24D123
GG 24D123
HOSE,DUAL,1:1,3/8X3/8,50',CS
Graco 24D123 Carbon Steel Dual Heat Zone Hose Bundle with Air Hose
$4,630.00
Power Supply, 24 VDC, 4A, 100W, 230VAC
GG 24D207
GG 24D207
Power Supply, 24 VDC, 4A, 100W, 230VAC
$1,085.00
250 Model ISO Orifice Kit With 0.039 In, 0.99 MM, Impingement Port Size
GG 24D233
GG 24D233
250 Model ISO Orifice Kit With 0.039 In, 0.99 MM, Impingement Port Size
$270.00
Kit, Needle And Nozzle
GG 24D280
GG 24D280
KIT,NEEDLE AND NOZZLE
Graco 24D280 Needle/Nozzle Kit for AirPro EFX LVMP Guns with 0.043 inch (1.1 mm) Nozzle
- Compatible Material: Motor Oil, Gear Oil, Automatic Transmission Fluid, Oil
$260.00
Kit, Needle, Nozzle, .028, HVLP
GG 24D303
GG 24D303
KIT,NEEDLE,NOZZLE,.028,HVLP
Graco 24D303 Needle/Nozzle Kit for AirPro EFX HiTEch Guns with 0.028 inch (0.7 mm) Nozzle
$519.00
Kit, G15 Retaining Ring
GG 24D438
GG 24D438
KIT,G15 RETAINING RING
Graco 24D438 G15 Spray Gun Retaining Ring Kit
$63.00
CONTRACTOR FLAT TIP, SPRAY 815
GG 269815
GG 269815
CONTRACTOR FLAT TIP, SPRAY 815
Graco 269815 Contractor Flat Tip, 815
The 815 Contractor Flat Tip produces a 16 to 18 inch fan and has a 0.015 inch orifice.
- Model: Contractor
- Series: Flat Tip
- Compatible Material: Architectural Coating
- For Use With: Silver Plus Airless Spray Gun
- Maximum Fan Width (cm): 40
- Maximum Fan Width (in): 16
- Maximum Fan Width (mm): 457
- Maximum Flow Rate (GPM): 0.24
- Maximum Flow Rate (L/min): 0.91
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (psi): 5000
- Minimum Fan Width (in): 16
- Minimum Fan Width (mm): 406
- Orifice Diameter (in): 0.015
- Pattern Size (in): 16 to 18
- Pattern Size (mm): 406.4 to 457.2
$11.40
CONTRACTOR FLAT TIP, SPRAY 821
GG 269821
GG 269821
CONTRACTOR FLAT TIP, SPRAY 821
Contractor Flat Tip, 821 The 821 Contractor Flat Tip produces a 16 to 18 inch fan and has a 0.021 inch orifice.
$11.40
CONTRACTOR FLAT TIP, SPRAY
GG 269925
GG 269925
CONTRACTOR FLAT TIP, SPRAY
Contractor Flat Tip, 925 The 925 Contractor Flat Tip produces an 18 to 20 inch (46 to 51 cm) fan and has a 0.025 inch orifice.
$11.40
CONTRACTOR FLAT TIP, SPRAY 831
GG 269831
GG 269831
CONTRACTOR FLAT TIP, SPRAY 831
Graco 269831 Contractor Flat Tip, 831
The 831 Contractor Flat Tip produces a 16 to 18 inch fan and has a 0.031 inch orifice.
- Model: Contractor
- Series: Flat Tip
- Compatible Material: Architectural Coating
- For Use With: Silver Plus Airless Spray Gun
- Maximum Fan Width (cm): 40
- Maximum Fan Width (in): 16
- Maximum Fan Width (mm): 457
- Maximum Flow Rate (GPM): 1.03
- Maximum Flow Rate (L/min): 3.90
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (psi): 5000
- Minimum Fan Width (in): 16
- Minimum Fan Width (mm): 406
- Orifice Diameter (in): 0.031
- Pattern Size (in): 16 to 18
- Pattern Size (mm): 406.4 to 457.2
$11.40
CONTROL, SYSTEM, PRODISPENSE
GG 26A070
GG 26A070
CONTROL, SYSTEM, PRODISPENSE
Graco 26A070 ProDispense Control Model Assembly, Base System
This cost-effective and user-friendly electronic system dispenses preset amounts of fluids.
Application: ProDispense allows durable goods manufacturers to quickly and accurately fill cavities with oil, grease, water, or other industrial fluids in assembly line environments, where accurate dispensing is essential.- Control 2 fluid panels with this base system.
- Deliver up to 8 different fluids at multiple dispense points, and accurately measure volume.
- Model: ProDispense
- For Use With: ProDispense Electronic Fluid Dispense and Meter System
- Frequency (Hz): 50/60
- Includes: 1 Advanced Display Module (ADM), 1 Fluid Control Module (26A134) that controls 2 fluid panels
$9,740.00
Meter, Gear, Assembly, G3000A
GG 26A119
GG 26A119
METER,GEAR, ASSY, G3000A
Graco 26A119 G3000A High Pressure Fluid Meters, 0.02 to 1.0 gpm (75 to 3800 cc/min) flow range
$7,330.00
PANEL, FLUID, OIL/LUBRICANT
GG 26A129
GG 26A129
PANEL, FLUID, OIL/LUBRICANT
ProDispense Fluid Panel Kit, Oil Meter, 10 wt oil to #2 grease This fluid panel kit for the ProDispense Electronic Preset Dispense System is ideal for oil and lubricant applications. For oil and lubricant applicatons Oil meter dispenses 10 wt oil to #2 grease.
$7,010.00
PANEL, FLUID, WATER/ANTIFREEZE
GG 26A130
GG 26A130
PANEL, FLUID, WATER/ANTIFREEZE
Graco 26A130 ProDispense Fluid Panel Kit, Water Meter, light viscosity, average resolution
This fluid panel kit for the ProDispense Electronic Preset Dispense System is ideal for water and antifreeze applications.
Application: For water and antifreeze applications- Turbine meter is compatible with water and antifreeze.
- Model: ProDispense
$9,090.00
KIT, FCM, FLUIDCTRL, PRODISPENSE
GG 26A134
GG 26A134
KIT, FCM, FLUIDCTRL, PRODISPENSE
Graco 26A134 ProDispense Fluid Control Module
Fluid Control Module (FCM) expands the base ProDispense system by 2 fluid panels.
- A mounting plate makes attachment to the fluid panel easy.
- Up to 3 modules can be used on each system.
- Additional FCM is required only if more than 2 fluid panels need to be controlled.
- Model: ProDispense
- For Use With: ProDispense Electronic Fluid Dispense and Meter System
- Includes: Mounting plate
$2,230.00
PANEL, FLUID, GREASE/PAINT, G3000
GG 26A131
GG 26A131
PANEL, FLUID, GREASE/PAINT, G3000
Graco 26A131 ProDispense Fluid Panel Kit, Grease/ Paint Meter, wide viscosity, high accuracy
This fluid panel kit for the ProDispense Electronic Preset Dispense System is ideal for grease and paint applications.
Application: For grease and paint applications- Model: ProDispense
- Air Inlet Size (in): 5/32
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: Push
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (in): 3/8
- Fluid Outlet Thread Gender: Male
- Fluid Outlet Thread Type: NPT
- For Use With: G3000 meter
- Maximum Air Pressure (bar): 7.03
- Maximum Air Pressure (kPa): 703
- Maximum Air Pressure (psi): 102
- Maximum Flow Rate (cc/min): 3800
- Maximum Flow Rate (GPM): 1
- Maximum Flow Rate (L/min): 3.8
- Maximum Working Pressure (bar): 207
- Maximum Working Pressure (psi): 3000
- Minimum Flow Rate (GPM): 0.02
$12,100.00
PANEL, FLUID, SOLVENT
GG 26A165
GG 26A165
PANEL, FLUID, SOLVENT
Graco 26A165 ProDispense Fluid Panel Kit, Solvent Meter, light viscosity, high accuracy
This fluid panel kit for the ProDispense Electronic Preset Dispense System is ideal for solvent applications.
Application: For solvent applications- Use S3000 meter with solvents and clear light viscosity materials.
- Model: ProDispense
- For Use With: S3000 meter
$15,220.00
T3 PUMP, TRANSFER, 3:1
GG 26A304
GG 26A304
T3 PUMP, TRANSFER, 3:1
Graco 26A304 T3 Supply Pump (Stainless Steel): 3:1 Fluid to Air Ratio
Transfer Pumps are required to move A and B materials to the Reactor Spray Systems. The T3 Transfer Pump combines Graco’s proven Merkur air-motor and popular T2 stainless steel lower. The T3 is a 3:1 ratio pump – using less air pressure to provide the same fluid pressure required.
- Easier to maneuver - The overall height of the T3 is 3.7 inches (9.4 cm) shorter above the drum than the T2, making it easier to remove from the drum inside of a spray rig.
- More quiet – Studies show the T3 Transfer Pump is about 3x more quiet than the T2 Transfer Pump.
- Less maintenance - the Merkur air-motor is based on air pilot valve technology. The air-motor switching is purely pneumatic. This differs from T1 and T2 Transfer Pumps, which use a mechanical reversing mechanism in the air-motor.
- Model: T3
- Series: Stainless Steel
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Compatible Material: Polyurethane Foam, Polyurea
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Includes: Fluid Supply Kit, Air Hose Kit
- Material: Stainless Steel
- Maximum Air Inlet Pressure (bar): 6.9
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (MPa): 0.69
- Maximum Air Inlet Pressure (psi): 100
- Maximum Working Pressure (bar): 21.7
- Maximum Working Pressure (kPa): 2170
- Maximum Working Pressure (MPa): 2.2
- Maximum Working Pressure (psi): 315
- Package Options: Bare
- Pump Ratio: 3:1
$2,560.00
Pro Dispense Fluid Panel with Coriolis Flow Meter
GG 26A247
GG 26A247
Pro Dispense Fluid Panel with Coriolis Flow Meter
$25,530.00
PANEL, FLUID, GREASE/PAINT, HELIC
GG 26A132
GG 26A132
PANEL, FLUID, GREASE/PAINT, HELIC
Graco 26A132 ProDispense Fluid Panel Kit, Helical Meter, wide viscosity, high accuracy
This fluid panel kit for the ProDispense Electronic Preset Dispense System is ideal for high viscosity applications.
Application: For high viscosity applications- HG6000 Helical Gear meter
- Model: ProDispense
- For Use With: HG6000 meter
$13,360.00