GRACO INC. S10595
GRACO INC. S10595 branded products
DYNA-STAR PUMP, 200:1, 400#
GG 25P785
GG 25P785
DYNA-STAR PUMP, 200:1, 400#
Dyna-Star® 200:1 Air-Powered Bare Grease Pump for 400 lb (180 kg) Barrel Graco Dyna-Star Air-Powered pumps offer reliability you can trust to provide fast grease delivery against high back pressure in an easy-to-service package. For use in hydraulic fracturing wellhead service and maintenance, well service blow out preventer maintenance and well service valve maintenance. Fast Flow at Higher Pressures - 20,000 PSI (1,379 bar) maximum operating pressure with 1.5 L/min flow at 10,000 psi back pressure. Fast and Easy Seal Repairs - Hex-style heavy-duty lower withstands harsh field conditions and aids intuitive seal replacements. CE and Hazardous Location Certified - ATEX Ex II 2 G Ex h IIA T4 Gb. Legendary Merkur Air Motor - Proven air valve is DataTrak®-ready. 100% assembled and tested in the USA. $11,190.00
Reactor Pump, Displacement, Tsl Cir, .552
GG 25P858
GG 25P858
Reactor Pump, Displacement, Tsl Cir, .552 Call for pricing
Reactor Pump, Displacement, Tsl Cir, .743
GG 25P944
GG 25P944
Reactor Pump, Displacement, Tsl Cir, .743 Call for pricing
GRINDLAZER SYSTEM, LONGOPAC SEPERATOR
GG 25R090
GG 25R090
GRINDLAZER SYSTEM, LONGOPAC SEPERATOR
Cyclone LP SeparatorGraco’s Cyclone LP Separator works in-line with the LazerVac to collect "larger debris" prior to reaching the vacuum filter - greatly extending the time between filter changes.
Cyclone Design- Reduced Filter Clogging
- Removes large debris before it gets to the vacuum filter — reducing filter clogging, which allows you to work longer
- No maintenance design
- Continuous dust containment bag means less exposure to silica dust and easier disposal
- Heavy-duty design will stand up to the harsh jobsite environment
$3,450.00
Grindlazer System, Dc1538 G Dcs Std-Speed
GG 25R100
GG 25R100
GRINDLAZER SYSTEM, DC1538 G DCS STD-SPEED
Graco 25R100 GrindLazer HP DC1538 G DCS Self-Propelled Gas-Powered Scarifier, Low-Speed Pulley Kit
The DC1538 G DCS heavy-duty, self-propelled drum scarifier is designed to tackle the most demanding removal and surface preparation jobs. It's capable of removing a path up to 16 inches wide and features Graco's electronic DCS Depth Control System to quickly adjust cut depth without stopping.
Application: All GrindLazer DC15 DCS models come with either a low or high-speed pulley kit installed. Choose a model with the high-speed pulley kit if operating with diamond or PCD cutters. Choose a model with the low-speed pulley kit if using with carbide cutters.- Do-It-All Solution
- Adaptable for leveling, grooving, scarifying, and stripping coatings
- Up to 16 inch removal path
- Wide variety of cutters available
- Low-speed pulley kit for carbide flail cutters
- Quick-change side plate for easier drum removal
- Depth Control System
- Eliminate Measuring & Guesswork
- Quickly and precisely adjust the cutter depth with the push of a button
- Achieve accurate cut depth for leveling, grooving, and inlay
- Eliminate damage due to “dropped drumsâ€
- DCS Controller
- Total Operator Control
- Easy adjustment via control panel buttons
- Set “zero point†where the cutter meets the surface
- Adjust cut depth in 0.01 inch increments Displays “active depth†from zero point
- English and metric units
- Robust design stands up to harsh job site environments
- Electronic components are protected against dust, debris, water, and vibration
- Designed for the Toughest Jobs
- All-steel chassis
- Low-vibration design
- Long-life bearings
- Powered by a 38 HP Kohler® EFI Gasoline Engine
- Dust Removal
- Dust port for connecting to LazerVac vacuum systems
- Product Series: High Production
- Air Filter Type: Heavy-Duty
- Cutter Drum Diameter (in): 10
- Cutter Type: Drum
- Depth Adjustment: Depth Control System (DCS)
- Engine Brand: Kohler
- Engine Size (HP): 38
- Engine Start Type: Electric Start
- Maximum Cut Rate (ft2/hr): 3500
- Maximum Cut Width (cm): 41
- Maximum Cut Width (in): 16
- Maximum Cut Width (mm): 406
$47,840.00
Grindlazer System, Dc1525 P Dcs Std-Speed
GG 25R101
GG 25R101
GRINDLAZER SYSTEM, DC1525 P DCS STD-SPEED
Graco 25R101 GrindLazer HP DC1525 P DCS Self-Propelled Propane-Powered Scarifier, Low-Speed Pulley Kit
The DC1525 P DCS heavy-duty, self-propelled drum scarifier is designed to tackle the most demanding removal and surface preparation jobs. It's capable of removing a path up to 16 inches wide and features Graco's electronic DCS Depth Control System to quickly adjust cut depth without stopping.
Application: All GrindLazer DC15 DCS models come with either a low or high-speed pulley kit installed. Choose a model with the high-speed pulley kit if operating with diamond or PCD cutters. Choose a model with the low-speed pulley kit if using with carbide cutters.- Do-It-All Solution
- Adaptable for leveling, grooving, scarifying, and stripping coatings
- Up to 16 inch removal path
- Wide variety of cutters available
- Low-speed pulley kit for carbide flail cutters
- Quick-change side plate for easier drum removal
- Depth Control System
- Eliminate Measuring & Guesswork
- Quickly and precisely adjust the cutter depth with the push of a button
- Achieve accurate cut depth for leveling, grooving, and inlay
- Eliminate damage due to “dropped drumsâ€
- DCS Controller
- Total Operator Control
- Easy adjustment via control panel buttons
- Set “zero point†where the cutter meets the surface
- Adjust cut depth in 0.01 inch increments
- Displays “active depth†from zero point
- English and metric units
- Robust design stands up to harsh job site environments
- Electronic components are protected against dust, debris, water, and vibration
- Designed for the Toughest Jobs
- All-steel chassis
- Low-vibration design
- Long-life bearings
- Powered by 25 HP Kohler® EFI Propane Engine
- Dust Removal
- Dust port for connecting to LazerVac vacuum systems
- Product Series: High Production
- Air Filter Type: Heavy-Duty
- Cutter Drum Diameter (in): 10
- Cutter Type: Drum
- Depth Adjustment: Depth Control System (DCS)
- Engine Brand: Kohler
- Engine Size (HP): 25
- Engine Start Type: Electric Start
- Maximum Cut Rate (ft2/hr): 3500
- Maximum Cut Width (cm): 41
- Maximum Cut Width (in): 16
- Maximum Cut Width (mm): 406
$47,840.00
Grindlazer System, Dc1520 E Dcs Std-Spd 380V
GG 25R103
GG 25R103
GRINDLAZER SYSTEM, DC1520 E DCS STD-SPD 380V
Graco 25R103 GrindLazer HP DC1520 E DCS Self-Propelled Electric Scarifier, Low-Speed Pulley Kit
The DC1520 E DCS heavy-duty, self-propelled drum scarifier is designed to tackle the most demanding removal and surface preparation jobs. It is capable of removing a path up to 16 inches wide and features Graco's electronic DCS Depth Control System to quickly adjust cut depth without stopping.
Application: All GrindLazer DC15 DCS models come with either a low or high-speed pulley kit installed. Choose a model with the high-speed pulley kit if operating with diamond or PCD cutters. Choose a model with the low-speed pulley kit if using with carbide cutters.- Do-It-All Solution
- Adaptable for leveling, grooving, scarifying, and stripping coatings
- Up to 16 inch removal path
- Wide variety of cutters available
- Low-speed pulley kit for carbide flail cutters
- Quick-change side plate for easier drum removal
- Depth Control System
- Eliminate Measuring & Guesswork
- Quickly and precisely adjust the cutter depth with the push of a button
- Achieve accurate cut depth for leveling, grooving, and inlay
- Eliminate damage due to “dropped drumsâ€
- DCS Controller
- Total Operator Control
- Easy adjustment via control panel buttons
- Set “zero point†where the cutter meets the surface
- Adjust cut depth in 0.01 inch increments
- Displays “active depth†from zero point
- English and metric units
- Robust design stands up to harsh job site environments
- Electronic components are protected against dust, debris, water, and vibration
- Designed for the Toughest Jobs
- All-steel chassis
- Low-vibration design
- Long-life bearings
- Powered by 20 HP Motor, 380V, 50Hz, 3ph
- Dust Removal
- Dust port for connecting to LazerVac vacuum systems
- Model: GrindLazer
- Series: High Production Series
- Product Series: High Production
- Cutter Drum Diameter (in): 10
- Cutter Type: Drum
- Engine Size (HP): 20
- Maximum Cut Rate (ft2/hr): 3500
- Maximum Cut Width (cm): 41
- Maximum Cut Width (in): 16
- Maximum Cut Width (mm): 406
Call for pricing
Grindlazer System, Dc1520 E Dcs Std-Spd 480V
GG 25R102
GG 25R102
GRINDLAZER SYSTEM, DC1520 E DCS STD-SPD 480V
Graco 25R102 GrindLazer HP DC1520 E DCS Self-Propelled Electric Scarifier, Low-Speed Pulley Kit
The DC1520 E DCS heavy-duty, self-propelled drum scarifier is designed to tackle the most demanding removal and surface preparation jobs. It is capable of removing a path up to 16 inches wide and features Graco's electronic DCS Depth Control System to quickly adjust cut depth without stopping.
Application: All GrindLazer DC15 DCS models come with either a low or high-speed pulley kit installed. Choose a model with the high-speed pulley kit if operating with diamond or PCD cutters. Choose a model with the low-speed pulley kit if using with carbide cutters.- Do-It-All Solution
- Adaptable for leveling, grooving, scarifying, and stripping coatings
- Up to 16 inch removal path
- Wide variety of cutters available
- Low-speed pulley kit for carbide flail cutters
- Quick-change side plate for easier drum removal
- Depth Control System
- Eliminate Measuring & Guesswork
- Quickly and precisely adjust the cutter depth with the push of a button
- Achieve accurate cut depth for leveling, grooving, and inlay
- Eliminate damage due to “dropped drumsâ€
- DCS Controller
- Total Operator Control
- Easy adjustment via control panel buttons
- Set “zero point†where the cutter meets the surface
- Adjust cut depth in 0.01 inch increments
- Displays “active depth†from zero point
- English and metric units
- Robust design stands up to harsh job site environments
- Electronic components are protected against dust, debris, water, and vibration
- Designed for the Toughest Jobs
- All-steel chassis
- Low-vibration design
- Long-life bearings
- Powered by 20 HP Motor, 480V, 60Hz, 3ph
- Dust Removal
- Dust port for connecting to LazerVac vacuum systems
- Product Series: High Production
- Cutter Drum Diameter (in): 10
- Cutter Type: Drum
- Depth Adjustment: Depth Control System (DCS)
- Engine Size (HP): 20
- Maximum Cut Rate (ft2/hr): 3500
- Maximum Cut Width (cm): 41
- Maximum Cut Width (in): 16
- Maximum Cut Width (mm): 406
Call for pricing
Reservoir, Cds, 12L, Ll Trans, Ovrfl
GG 25R118
GG 25R118
Reservoir, Cds, 12L, Ll Trans, Ovrfl $2,290.00
Reservoir, Cds, 20L, Ll Trans, Ovrfl
GG 25R119
GG 25R119
Reservoir, Cds, 20L, Ll Trans, Ovrfl $2,460.00
Reservoir, Cds, 12L, Ll Switch, Ovrfl
GG 25R120
GG 25R120
Reservoir, Cds, 12L, Ll Switch, Ovrfl $2,200.00
Reservoir, Cds, 20L, Ll Switch, Ovrfl
GG 25R121
GG 25R121
Reservoir, Cds, 20L, Ll Switch, Ovrfl $2,400.00
Reservoir, Cds, 12L, Lltrns, Ovrfl, Nofp
GG 25R122
GG 25R122
Reservoir, Cds, 12L, Lltrns, Ovrfl, Nofp $1,990.00
Reservoir, Cds, 20L, Lltrns, Ovrfl, Nofp
GG 25R123
GG 25R123
Reservoir, Cds, 20L, Lltrns, Ovrfl, Nofp $2,170.00
Reservoir, Cds, 12L, Llswch, Ovrfl, Nofp
GG 25R124
GG 25R124
Reservoir, Cds, 12L, Llswch, Ovrfl, Nofp $1,910.00
Reservoir, Cds, 20L, Llswch, Ovrfl, Nofp
GG 25R125
GG 25R125
Reservoir, Cds, 20L, Llswch, Ovrfl, Nofp $2,100.00
Module, 19.38in Wiper, Belgium Assembly
GG 25R478
GG 25R478
Module, 19.38In Wiper, Belgium Assy $13,490.00
Module, 20 Epdm Seal, Belgium Assembly
GG 25R479
GG 25R479
Module, 20 Epdm Seal, Belgium Assy $14,540.00
Kit, Adapter, Extension, Hp20, Di
GG 25T283
GG 25T283
Kit, Adapter, Extension, Hp20, Di Call for pricing