GRACO INC. S10595
GRACO INC. S10595 branded products
KIT, DIAPHRAGM-F3 PS
GG 25P207
GG 25P207
KIT, DIAPHRAGM-F3 PS
PTFE/Santoprene 2-piece Diaphragm Kit for 1.5-inch Pump $854.00
KIT, DIAPHRAGM-F1 EO
GG 25P210
GG 25P210
KIT, DIAPHRAGM-F1 EO
EPDM Overmold Diaphragm Kit for 1.5-inch Pump $899.00
KIT, DIAPHRAGM-H4 PS
GG 25P266
GG 25P266
KIT, DIAPHRAGM-H4 PS
PTFE/Santoprene 2-piece Diaphragm Kit for 2- to 4-inch Pump $766.00
Kit, Diaphragm-H1 Fk
GG 25P268
GG 25P268
KIT, DIAPHRAGM-H1 FK
Graco 25P268 FKM (Viton) Diaphragm Kit for 2- to 4-inch Pump
$1,905.00
Kit, Sdu, Seal infl Fda Epdm
GG 25P318
GG 25P318
KIT, SDU, SEAL INFL FDA EPDM
Graco 25P318 Inflatable Drum Plate Replacement Seal Kit, EPDM
$2,020.00
REACTOR HEATED HOSE, R3, IHH, 3/8", 2000, 50'
GG 25P434
GG 25P434
REACTOR HEATED HOSE, R3, IHH, 3/8", 2000, 50'
Xcelerator 50 ft x 3/8 in Internal Heated Hose, 2000 psi, Without Cable, Xtreme-Wrap, Reactor 3 Graco’s new Xcelerator heated hoses provide more options and control than ever. All Xcelerator hoses are designed to provide full independent A and B temperature control. This provides more precise pressure balancing and improved material yield. New robust construction provides longer life and reduced maintenance. Xcelerator heated hoses come as internally or externally heated hoses, that are independently temperature controlled. The new internally heated hoses have 40% faster warm-up times, are 40% more flexible, and have a 35% smaller diameter compared to traditional externally heated hose. Temperature Control- Fully-independent A and B temperature control
- Internally heated and externally heated options
Variety of Lengths
- Available in both 50 ft and 100 ft lengths: Minimizes fluid and electrical connections
- Reduces maintenance and issues with no cables or sensors required
$3,760.00
REACTOR HEATED HOSE, R3, IHH, 3/8", 2000, 100
GG 25P435
GG 25P435
REACTOR HEATED HOSE, R3, IHH, 3/8", 2000, 100
Xcelerator 100 ft x 3/8 in Internal Heated Hose, 2000 psi, Without Cable, Xtreme-Wrap, Reactor 3 Graco’s new Xcelerator heated hoses provide more options and control than ever. All Xcelerator hoses are designed to provide full independent A and B temperature control. This provides more precise pressure balancing and improved material yield. New robust construction provides longer life and reduced maintenance. Xcelerator heated hoses come as internally or externally heated hoses, that are independently temperature controlled. The new internally heated hoses have 40% faster warm-up times, are 40% more flexible, and have a 35% smaller diameter compared to traditional externally heated hose. Temperature Control- Fully-independent A and B temperature control
- Internally heated and externally heated options
Variety of Lengths
- Available in both 50 ft and 100 ft lengths: Minimizes fluid and electrical connections
- Reduces maintenance and issues with no cables or sensors required
$6,780.00
REACTOR HEATED HOSE, R3, IHH, 3/8", 2000, 50', RTD
GG 25P437
GG 25P437
REACTOR HEATED HOSE, R3, IHH, 3/8", 2000, 50', RTD
Xcelerator 50 ft x 3/8 in Internal Heated Hose, 2000 psi, RTD, Xtreme-Wrap, Reactor 3 Graco’s new Xcelerator heated hoses provide more options and control than ever. All Xcelerator hoses are designed to provide full independent A and B temperature control. This provides more precise pressure balancing and improved material yield. New robust construction provides longer life and reduced maintenance. Xcelerator heated hoses come as internally or externally heated hoses, that are independently temperature controlled. The new internally heated hoses have 40% faster warm-up times, are 40% more flexible, and have a 35% smaller diameter compared to traditional externally heated hose. Temperature Control- Fully-independent A and B temperature control
- Internally heated and externally heated options
- Available in both 50 ft and 100 ft lengths: Minimizes fluid and electrical connections
- Reduces maintenance and issues with no cables or sensors required
$3,980.00
REACTOR HEATED HOSE, R3, IHH, 3/8", 2000, 100', RTD
GG 25P438
GG 25P438
REACTOR HEATED HOSE, R3, IHH, 3/8", 2000, 100', RTD
Xcelerator 100 ft x 3/8 in Internal Heated Hose, 2000 psi, RTD, Xtreme-Wrap, Reactor 3 Graco’s new Xcelerator heated hoses provide more options and control than ever. All Xcelerator hoses are designed to provide full independent A and B temperature control. This provides more precise pressure balancing and improved material yield. New robust construction provides longer life and reduced maintenance. Xcelerator heated hoses come as internally or externally heated hoses, that are independently temperature controlled. The new internally heated hoses have 40% faster warm-up times, are 40% more flexible, and have a 35% smaller diameter compared to traditional externally heated hose. Temperature Control- Fully-independent A and B temperature control
- Internally heated and externally heated options
- Available in both 50 ft and 100 ft lengths: Minimizes fluid and electrical connections
- Reduces maintenance and issues with no cables or sensors required
$7,140.00
GRINDLAZER SYSTEM, HP DC1538 G DCS
GG 25P474
GG 25P474
GRINDLAZER SYSTEM, HP DC1538 G DCS
GrindLazer HP DC1538 G DCS Self-Propelled Gas-Powered Scarifier, High-Speed Pulley Kit The DC1538 G DCS heavy-duty, self-propelled drum scarifier is designed to tackle the most demanding removal and surface preparation jobs. It's capable of removing a path up to 16 inches wide and features Graco's electronic DCS Depth Control System to quickly adjust cut depth without stopping. All GrindLazer DC15 DCS models come with either a low or high-speed pulley kit installed. Choose a model with the high-speed pulley kit if operating with diamond or PCD cutters. Choose a model with the low-speed pulley kit if using with carbide cutters. Do-It-All Solution- Adaptable for leveling, grooving, scarifying, and stripping coatings
- Up to 16 inch removal path
- Wide variety of cutters available
- High-speed pulley kit for diamond and PCD cutters
- Quick-change side plate for easier drum removal
- Eliminate Measuring & Guesswork
- Quickly and precisely adjust the cutter depth with the push of a button
- Achieve accurate cut depth for leveling, grooving, and inlay
- Eliminate damage due to “dropped drums”
- Total Operator Control
- Easy adjustment via control panel buttons
- Set “zero point” where the cutter meets the surface
- Adjust cut depth in 0.01 inch increments
- Displays “active depth” from zero point
- English and metric units
- Robust design stands up to harsh job site environments
- Electronic components are protected against dust, debris, water, and vibration
- Variable-speed hydrostatic drive allows user to dial in the speed for each application
- All-steel chassis
- Low-vibration design
- Long-life bearings
- Dust port for connecting to LazerVac vacuum systems
$47,840.00
GRINDLAZER SYSTEM, HP DC1525 P DCS
GG 25P475
GG 25P475
GRINDLAZER SYSTEM, HP DC1525 P DCS
GrindLazer HP DC1525 P DCS Self-Propelled Propane-Powered Scarifier, High-Speed Pulley Kit The DC1525 P DCS heavy-duty, self-propelled drum scarifier is designed to tackle the most demanding removal and surface preparation jobs. It's capable of removing a path up to 16 inches wide and features Graco's electronic DCS Depth Control System to quickly adjust cut depth without stopping. All GrindLazer DC15 DCS models come with either a low or high-speed pulley kit installed. Choose a model with the high-speed pulley kit if operating with diamond or PCD cutters. Choose a model with the low-speed pulley kit if using with carbide cutters. Do-It-All Solution- Adaptable for leveling, grooving, scarifying, and stripping coatings
- Up to 16 inch removal path
- Wide variety of cutters available
- High-speed pulley kit for diamond and PCD cutters
- Quick-change side plate for easier drum removal
- Eliminate Measuring & Guesswork
- Quickly and precisely adjust the cutter depth with the push of a button
- Achieve accurate cut depth for leveling, grooving, and inlay
- Eliminate damage due to “dropped drums”
- Total Operator Control
- Easy adjustment via control panel buttons
- Set “zero point” where the cutter meets the surface
- Adjust cut depth in 0.01 inch increments
- Displays “active depth” from zero point
- English and metric units
- Robust design stands up to harsh job site environments
- Electronic components are protected against dust, debris, water, and vibration
- Variable-speed hydrostatic drive allows user to dial in the speed for each application
- All-steel chassis
- Low-vibration design
- Long-life bearings
- Dust port for connecting to LazerVac vacuum systems
$47,840.00
GRINDLAZER SYSTEM, HP DC1520 E DCS
GG 25P476
GG 25P476
GRINDLAZER SYSTEM, HP DC1520 E DCS
GrindLazer HP DC1520 E DCS Self-Propelled Electric Scarifier, High-Speed Pulley Kit The DC1520 E DCS heavy-duty, self-propelled drum scarifier is designed to tackle the most demanding removal and surface preparation jobs. It is capable of removing a path up to 16 inches wide and features Graco's electronic DCS Depth Control System to quickly adjust cut depth without stopping. All GrindLazer DC15 DCS models come with either a low or high-speed pulley kit installed. Choose a model with the high-speed pulley kit if operating with diamond or PCD cutters. Choose a model with the low-speed pulley kit if using with carbide cutters. Do-It-All Solution- Adaptable for leveling, grooving, scarifying, and stripping coatings
- Up to 16 inch removal path
- Wide variety of cutters available
- High-speed pulley kit for diamond and PCD cutters
- Quick-change side plate for easier drum removal
- Eliminate Measuring & Guesswork
- Quickly and precisely adjust the cutter depth with the push of a button
- Achieve accurate cut depth for leveling, grooving, and inlay
- Eliminate damage due to “dropped drums”
- Total Operator Control
- Easy adjustment via control panel buttons
- Set “zero point” where the cutter meets the surface
- Adjust cut depth in 0.01 inch increments
- Displays “active depth” from zero point
- English and metric units
- Robust design stands up to harsh job site environments
- Electronic components are protected against dust, debris, water, and vibration
- Variable-speed hydrostatic drive allows user to dial in the speed for each application
- All-steel chassis
- Low-vibration design
- Long-life bearings
- Dust port for connecting to LazerVac vacuum systems
$47,840.00
REACTOR HEATED HOSE, R3, IHH, 3/8", 3500, 50'
GG 25P534
GG 25P534
REACTOR HEATED HOSE, R3, IHH, 3/8", 3500, 50'
Xcelerator 50 ft x 3/8 in Internal Heated Hose, 3500 psi, Without Cable, Xtreme-Wrap, Reactor 3 Graco’s new Xcelerator heated hoses provide more options and control than ever. All Xcelerator hoses are designed to provide full independent A and B temperature control. This provides more precise pressure balancing and improved material yield. New robust construction provides longer life and reduced maintenance. Xcelerator heated hoses come as internally or externally heated hoses, that are independently temperature controlled. The new internally heated hoses have 40% faster warm-up times, are 40% more flexible, and have a 35% smaller diameter compared to traditional externally heated hose. Temperature Control- Fully-independent A and B temperature control
- Internally heated and externally heated options
Variety of Lengths
- Available in both 50 ft and 100 ft lengths: Minimizes fluid and electrical connections
- Reduces maintenance and issues with no cables or sensors required
$5,110.00
REACTOR HEATED HOSE, R3, IHH, 3/8", 3500, 100'
GG 25P535
GG 25P535
REACTOR HEATED HOSE, R3, IHH, 3/8", 3500, 100'
Xcelerator 100 ft x 3/8 in Internal Heated Hose, 3500 psi, Without Cable, Xtreme-Wrap, Reactor 3 Graco’s new Xcelerator heated hoses provide more options and control than ever. All Xcelerator hoses are designed to provide full independent A and B temperature control. This provides more precise pressure balancing and improved material yield. New robust construction provides longer life and reduced maintenance. Xcelerator heated hoses come as internally or externally heated hoses, that are independently temperature controlled. The new internally heated hoses have 40% faster warm-up times, are 40% more flexible, and have a 35% smaller diameter compared to traditional externally heated hose. Temperature Control- Fully-independent A and B temperature control
- Internally heated and externally heated options
Variety of Lengths
- Available in both 50 ft and 100 ft lengths: Minimizes fluid and electrical connections
- Reduces maintenance and issues with no cables or sensors required
$9,180.00
REACTOR HEATED HOSE, R3, IHH, 3/8", 3500, 50', RTD
GG 25P537
GG 25P537
REACTOR HEATED HOSE, R3, IHH, 3/8", 3500, 50', RTD
Xcelerator 50 ft x 3/8 in Internal Heated Hose, 3500 psi, RTD, Xtreme-Wrap, Reactor 3 Graco’s new Xcelerator heated hoses provide more options and control than ever. All Xcelerator hoses are designed to provide full independent A and B temperature control. This provides more precise pressure balancing and improved material yield. New robust construction provides longer life and reduced maintenance. Xcelerator heated hoses come as internally or externally heated hoses, that are independently temperature controlled. The new internally heated hoses have 40% faster warm-up times, are 40% more flexible, and have a 35% smaller diameter compared to traditional externally heated hose. Temperature Control- Fully-independent A and B temperature control
- Internally heated and externally heated options
- Available in both 50 ft and 100 ft lengths: Minimizes fluid and electrical connections
- Reduces maintenance and issues with no cables or sensors required
$5,300.00
REACTOR HEATED HOSE, R3, IHH, 3/8", 3500, 100', RTD
GG 25P538
GG 25P538
REACTOR HEATED HOSE, R3, IHH, 3/8", 3500, 100', RTD
Xcelerator 100 ft x 3/8 in Internal Heated Hose, 3500 psi, RTD, Xtreme-Wrap, Reactor 3 Graco’s new Xcelerator heated hoses provide more options and control than ever. All Xcelerator hoses are designed to provide full independent A and B temperature control. This provides more precise pressure balancing and improved material yield. New robust construction provides longer life and reduced maintenance. Xcelerator heated hoses come as internally or externally heated hoses, that are independently temperature controlled. The new internally heated hoses have 40% faster warm-up times, are 40% more flexible, and have a 35% smaller diameter compared to traditional externally heated hose. Temperature Control- Fully-independent A and B temperature control
- Internally heated and externally heated options
- Available in both 50 ft and 100 ft lengths: Minimizes fluid and electrical connections
- Reduces maintenance and issues with no cables or sensors required
$9,560.00
Kit, Ball, Ptfe, 3in
GG 25P566
GG 25P566
KIT, BALL, PTFE, 3"
Graco 25P566 3-inch PTFE Check Ball Kit
$1,080.00
Kit, Ball, Santoprene, 3in
GG 25P568
GG 25P568
KIT, BALL, SANTOPRENE, 3"
Graco 25P568 3-inch Santoprene Check Ball Kit
$321.00
Kit, Ball-K1 Fk
GG 25P570
GG 25P570
KIT, BALL-K1 FK
Graco 25P570 3-inch FKM (Viton) Check Ball Kit
$1,825.00
Kit, Ball, Neoprene, 3in
GG 25P571
GG 25P571
KIT, BALL, NEOPRENE, 3"
Graco 25P571 3-inch Polychloroprene Check Ball Kit
$610.00
FUSION PC GUN, RND, 01-02
GG 25P590
GG 25P590
FUSION PC GUN, RND, 01-02
Fusion ProConnect Gun with Round 01-02 Mix Chamber and 0.047 in (1.2 mm) Orifice Size A perfect rebuild in seconds is now possible with the revolutionary Fusion PC (ProConnect) gun, featuring an all-in-one cartridge head that replaces multiple individual parts of the fluid section with a single component. Simply replacing the cartridge completely eliminates the need for a time-consuming traditional rebuild, keeping you spraying and minimizing costly downtime. Unlike any other spray foam gun available A single cartridge replaces the entire fluid section in seconds Built on top of the time-tested Fusion Air Purge platform, the PC gun sprays exactly like a Fusion AP Integrated check valves for cross-over containment 13 parts are replaced by a single ProConnect cartridge Eliminates the need to purchase fluid section o-rings Spare ProConnect cartridges can replace your back-up guns Retrofit Kit available to convert existing Fusion AP guns $3,870.00
FUSION PC GUN, BARE
GG 25P591
GG 25P591
FUSION PC GUN, BARE
Fusion ProConnect Gun without Mix Chamber A perfect rebuild in seconds is now possible with the revolutionary Fusion PC (ProConnect) gun, featuring an all-in-one cartridge head that replaces multiple individual parts of the fluid section with a single component. Simply replacing the cartridge completely eliminates the need for a time-consuming traditional rebuild, keeping you spraying and minimizing costly downtime. This gun can be combined with any Fusion PC mix chamber (sold separately). Unlike any other spray foam gun available A single cartridge replaces the entire fluid section in seconds Built on top of the time-tested Fusion Air Purge platform, the PC gun sprays exactly like a Fusion AP Integrated check valves for cross-over containment 13 parts are replaced by a single ProConnect cartridge Eliminates the need to purchase fluid section o-rings Spare ProConnect cartridges can replace your back-up guns Retrofit Kit available to convert existing Fusion AP guns $3,540.00
KIT, FUSION PC, RETRO, RND, 02
GG 25P702
GG 25P702
KIT, FUSION PC, RETRO, RND, 02
Fusion ProConnect Retrofit Kit with Round 02 Mix Chamber and 0.052 in (1.3 mm) Orifice Size Transform your Fusion Air Purge gun into a Fusion PC with the ProConnect Retrofit Kit, allowing you to take full advantage of what the Fusion PC delivers: A perfect rebuild in seconds. The Retrofit Kit is compatible with all Fusion AP guns and is available in multiple mix chamber sizes. Acquire all the advantages of the revolutionary Fusion ProConnect while utilizing your existing Fusion AP handle and fluid manifold. Same Fusion AP gun, all new possibilities A single cartridge replaces the entire fluid section in seconds Sprays exactly like a Fusion AP Integrated check valves for cross-over containment 13 parts are replaced by a single ProConnect cartridge Eliminates the need to purchase fluid section o-rings Spare ProConnect cartridges can replace your back-up guns $1,615.00
ADAPTER, AGITATOR, MOUNT, 5 GALLON
GG 25P708
GG 25P708
ADAPTER, AGITATOR, MOUNT, 5 GALLON
5/10 Gallon Pail Agitator Air Motor Mounting Adapter $163.50
Kit, Fusion Pc, Retro, Rnd, 01-02
GG 25P703
GG 25P703
KIT, FUSION PC, RETRO, RND, 01-02
Graco 25P703 Fusion ProConnect Retrofit Kit with Round 01-02 Mix Chamber and 0.047 in (1.2 mm) Orifice Size
Transform your Fusion Air Purge gun into a Fusion PC with the ProConnect Retrofit Kit, allowing you to take full advantage of what the Fusion PC delivers: A perfect rebuild in seconds. The Retrofit Kit is compatible with all Fusion AP guns and is available in multiple mix chamber sizes. Acquire all the advantages of the revolutionary Fusion ProConnect while utilizing your existing Fusion AP handle and fluid manifold.
Application: Same Fusion AP gun, all new possibilities- A single cartridge replaces the entire fluid section in seconds
- Sprays exactly like a Fusion AP
- Integrated check valves for cross-over containment
- Eliminates the need to purchase fluid section o-rings
- Spare ProConnect cartridges can replace your back-up guns
- Model: Fusion PC
- Series: Round
- Includes: PC47RD Mix Chamber Tip
- Mix Chamber: 01-02 (.047)
$1,615.00
REACTOR HEATED HOSE, WHIP, R3, 2000PSI, 10FT
GG 25P775
GG 25P775
REACTOR HEATED HOSE, WHIP, R3, 2000PSI, 10FT
Xcelerator 10 ft x 1/4 in High Flex Whip Hose, 2000 psi, Without Cable, Xtreme-Wrap, Reactor 3 Graco’s new Xcelerator heated hoses provide more options and control than ever. All Xcelerator hoses are designed to provide full independent A and B temperature control. This provides more precise pressure balancing and improved material yield. New robust construction provides longer life and reduced maintenance. Xcelerator heated hoses come as internally or externally heated hoses, that are independently temperature controlled. The new internally heated hoses have 40% faster warm-up times, are 40% more flexible, and have a 35% smaller diameter compared to traditional externally heated hose. Temperature Control- Fully-independent A and B temperature control
- Internally heated and externally heated options
Variety of Lengths
- Available in both 50 ft and 100 ft lengths: Minimizes fluid and electrical connections
- Reduces maintenance and issues with no cables or sensors required
$1,270.00
REACTOR HEATED HOSE, WHIP, R3, 2000PSI, 20FT
GG 25P776
GG 25P776
REACTOR HEATED HOSE, WHIP, R3, 2000PSI, 20FT
Xcelerator 20 ft x 1/4 in High Flex Whip Hose, 2000 psi, Without Cable, Xtreme-Wrap, Reactor 3 Graco’s new Xcelerator heated hoses provide more options and control than ever. All Xcelerator hoses are designed to provide full independent A and B temperature control. This provides more precise pressure balancing and improved material yield. New robust construction provides longer life and reduced maintenance. Xcelerator heated hoses come as internally or externally heated hoses, that are independently temperature controlled. The new internally heated hoses have 40% faster warm-up times, are 40% more flexible, and have a 35% smaller diameter compared to traditional externally heated hose. Temperature Control- Fully-independent A and B temperature control
- Internally heated and externally heated options
Variety of Lengths
- Available in both 50 ft and 100 ft lengths: Minimizes fluid and electrical connections
- Reduces maintenance and issues with no cables or sensors required
$1,845.00
REACTOR HEATED HOSE, WHIP, R3, 3500PSI, 10FT
GG 25P777
GG 25P777
REACTOR HEATED HOSE, WHIP, R3, 3500PSI, 10FT
Xcelerator 10 ft x 1/4 in High Flex Whip Hose, 3500 psi, Without Cable, Xtreme-Wrap, Reactor 3 Graco’s new Xcelerator heated hoses provide more options and control than ever. All Xcelerator hoses are designed to provide full independent A and B temperature control. This provides more precise pressure balancing and improved material yield. New robust construction provides longer life and reduced maintenance. Xcelerator heated hoses come as internally or externally heated hoses, that are independently temperature controlled. The new internally heated hoses have 40% faster warm-up times, are 40% more flexible, and have a 35% smaller diameter compared to traditional externally heated hose. Temperature Control- Fully-independent A and B temperature control
- Internally heated and externally heated options
Variety of Lengths
- Available in both 50 ft and 100 ft lengths: Minimizes fluid and electrical connections
- Reduces maintenance and issues with no cables or sensors required
$1,595.00
REACTOR HEATED HOSE, WHIP, R3, 3500PSI, 20FT
GG 25P778
GG 25P778
REACTOR HEATED HOSE, WHIP, R3, 3500PSI, 20FT
Xcelerator 20 ft x 1/4 in High Flex Whip Hose, 3500 psi, Without Cable, Xtreme-Wrap, Reactor 3 Graco’s new Xcelerator heated hoses provide more options and control than ever. All Xcelerator hoses are designed to provide full independent A and B temperature control. This provides more precise pressure balancing and improved material yield. New robust construction provides longer life and reduced maintenance. Xcelerator heated hoses come as internally or externally heated hoses, that are independently temperature controlled. The new internally heated hoses have 40% faster warm-up times, are 40% more flexible, and have a 35% smaller diameter compared to traditional externally heated hose. Temperature Control- Fully-independent A and B temperature control
- Internally heated and externally heated options
Variety of Lengths
- Available in both 50 ft and 100 ft lengths: Minimizes fluid and electrical connections
- Reduces maintenance and issues with no cables or sensors required
$2,110.00
Grindlazer System, Graco Fs351 E Dcs 380V/50
GG 25P783
GG 25P783
GRINDLAZER SYSTEM, GRACO FS351 E DCS 380V/50
Graco 25P783 GrindLazer HP DC1520 E DCS Self-Propelled Electric Scarifier, High-Speed Pulley Kit
The DC1520 E DCS heavy-duty, self-propelled drum scarifier is designed to tackle the most demanding removal and surface preparation jobs. It is capable of removing a path up to 16 inches wide and features Graco's electronic DCS Depth Control System to quickly adjust cut depth without stopping.
Application: All GrindLazer DC15 DCS models come with either a low or high-speed pulley kit installed. Choose a model with the high-speed pulley kit if operating with diamond or PCD cutters. Choose a model with the low-speed pulley kit if using with carbide cutters.- Do-It-All Solution
- Adaptable for leveling, grooving, scarifying, and stripping coatings
- Up to 16 inch removal path
- Wide variety of cutters available
- High-speed pulley kit for diamond and PCD cutters
- Quick-change side plate for easier drum removal
- Depth Control System
- Eliminate Measuring & Guesswork
- Quickly and precisely adjust the cutter depth with the push of a button
- Achieve accurate cut depth for leveling, grooving, and inlay
- Eliminate damage due to “dropped drumsâ€
- DCS Controller
- Total Operator Control
- Easy adjustment via control panel buttons
- Set “zero point†where the cutter meets the surface
- Adjust cut depth in 0.01 inch increments
- Displays “active depth†from zero point
- English and metric units
- Robust design stands up to harsh job site environments
- Electronic components are protected against dust, debris, water, and vibration
- Designed for the Toughest Jobs
- All-steel chassis
- Low-vibration design
- Long-life bearings
- Powered by 20 HP Motor, 380V, 50Hz, 3ph
- Dust Removal
- Dust port for connecting to LazerVac vacuum systems
- Model: GrindLazer
- Series: High Production Series
- Product Series: High Production
- Cutter Drum Diameter (in): 10
- Cutter Type: Drum
- Maximum Cut Rate (ft2/hr): 3500
- Maximum Cut Width (cm): 41
- Maximum Cut Width (in): 16
- Maximum Cut Width (mm): 406
$47,840.00
DYNA-STAR PUMP, 200:1, 120#
GG 25P784
GG 25P784
DYNA-STAR PUMP, 200:1, 120#
Dyna-Star® 200:1 Air-Powered Bare Grease Pump for 120 lb (55 kg) Keg Graco Dyna-Star Air-Powered pumps offer reliability you can trust to provide fast grease delivery against high back pressure in an easy-to-service package. For use in hydraulic fracturing wellhead service and maintenance, well service blow out preventer maintenance and well service valve maintenance. Fast Flow at Higher Pressures - 20,000 PSI (1,379 bar) maximum operating pressure with 1.5 L/min flow at 10,000 psi back pressure. Fast and Easy Seal Repairs - Hex-style heavy-duty lower withstands harsh field conditions and aids intuitive seal replacements. CE and Hazardous Location Certified - ATEX Ex II 2 G Ex h IIA T4 Gb. Legendary Merkur Air Motor - Proven air valve is DataTrak®-ready. 100% assembled and tested in the USA. $10,960.00