GRACO INC. S10595
GRACO INC. S10595 branded products
SPRAYER, 390, STAND, CORDLESS, NA
GG 25T804
GG 25T804
SPRAYER, 390, STAND, CORDLESS, NA
390 PC Cordless Airless Sprayer, Stand Introducing the first and only cordless high performance stationary paint sprayer. Designed to deliver all the performance of a corded 390 PC airless sprayer along with the freedom from power cords, electrical outlets or generators. Experience the power and freedom to spray every job faster. The ONLY High performance cordless paint sprayer — up to 3,300 psi with 0.021 inch max tip. Sprays up to 3 gallons on a single battery charge — two batteries included for all day spraying. Expanded application capability to spray anywhere! Benefits You’ll Appreciate on Every Job:- Setup where you want instead of where the power is located
- Consistent, all-day spraying power without power fluctuations
- Deliver perfect airless finishes with extended runtime and RAC X Low Pressure SwitchTips
- Eliminate competing for power with other trades
- Stop wasting time dealing with long extension cords
- Lightest weight makes it easier to move and transport
- Experience quiet jobsites with battery power instead of using noisy generators
- High capacity 6ah FLEXVOLT batteries — spray up to 3 gallons per battery charge
- Delivered complete with two batteries
- Fan-cooled fast charger—recharges battery in under 60 minutes
- Powerful brushless DC motor provides extended battery run time
- Lightweight, compact design allows for increased portability
- Lasts 2X longer than the next leading brand
- Long Life V-Max Blue Packings, Chromex rod and hardened stainless steel cylinder
- Faster cleaning with the QuikAccess intake valve
- Eliminate costly downtime
- Fast and easy pump swaps in minutes
- The longest lasting drive
- Hardened steel gears provide smooth and reliable operation and a lifetime warranty
- Easy maintenance & less clogging
- Exclusive inside-out filtering process ensures quality finish
- Allows for 0-3,300 psi and delivers extended battery run time when spraying at low pressure
- Thick chrome over steel withstands jobsite abuse
- Spray at lower pressure for extended battery runtime, less overspray, longest tip life
$3,330.00
SPRAYER, 390, HIBOY, CORDLESS, NA
GG 25T805
GG 25T805
SPRAYER, 390, HIBOY, CORDLESS, NA
390 PC Cordless Airless Sprayer, Hi-Boy Introducing the first and only cordless high performance stationary paint sprayer. Designed to deliver all the performance of a corded 390 PC airless sprayer along with the freedom from power cords, electrical outlets or generators. Experience the power and freedom to spray every job faster. Test 3.17 Long Description The ONLY High performance cordless paint sprayer — up to 3,300 psi with 0.021 inch max tip. Sprays up to 3 gallons on a single battery charge — two batteries included for all day spraying. Expanded application capability to spray anywhere! Benefits You’ll Appreciate on Every Job:- Setup where you want instead of where the power is located
- Consistent, all-day spraying power without power fluctuations
- Deliver perfect airless finishes with extended runtime and RAC X Low-Pressure SwitchTips
- Eliminate competing for power with other trades
- Stop wasting time dealing with long extension cords
- Lightest weight makes it easier to move and transport
- Experience quiet jobsites with battery power instead of using noisy generators
- High capacity 6ah FLEXVOLT batteries — spray up to 3 gallons per battery charge
- Delivered complete with two batteries
- Fan-cooled fast charger—recharges battery in under 60 minutes
- Powerful brushless DC motor provides extended battery run time
- Lightweight, compact design allows for increased portability
- Lasts 2X longer than the next leading brand
- Long Life V-Max Blue Packings, Chromex rod and hardened stainless steel cylinder
- Faster cleaning with the QuikAccess intake valve
- Eliminate costly downtime
- Pump swaps in minutes – no tools, pins or parts to lose
- The longest lasting drive
- Hardened steel gears provide smooth and reliable operation and a lifetime warranty
- Easy maintenance & less clogging
- Exclusive inside-out filtering process ensures quality finish
- Allows for 0-3,300 psi and delivers extended battery run time when spraying at low pressure
- Thick chrome over steel withstands jobsite abuse
- Design allows for easy one person bucket changes
- Retractable handle doubles as hose storage
- Spray at lower pressure for extended battery runtime, less overspray, longest tip life
$3,590.00
PUMP, 12VDC, 3.8 GPM, ON DEMAND
GG 25T818
GG 25T818
PUMP, 12VDC, 3.8 GPM, ON DEMAND
EGP™ On-Demand Pump, 12 VDC, 3.8 gpm (14.4 lpm), 325 psi (22.4 bar) Choose cost-saving convenience with the all-new Graco EGP electric pumps. Install the EGP on-demand pump to replace traditional pneumatic pumps and reduce operating costs. These pumps offer the same powerful, high-quality performance you’ve come to expect from Graco — only for less operating cost and more convenience. Install the EGP On-Demand Pump in a variety of applications including workshops, mobile trucks and industrial plants. Use it as an energy-efficient option to standard pneumatic pumps. Electrical Flexibility - Available in 12 VDC and 115 VAC power options. Smooth Fluid Flow 4 gpm (15 lpm) - Output flow is continuous and non-pulsating up to 4 gpm (15 lpm). Heavy-Duty Motor with Long Life - Industrial-grade electric motors with over-temperature protection on 115 VAC models. Fluid Flow When Needed - On-demand pressure sensing technology starts and stops the pump during the dispense. Pump Reliability - Internal inlet and outlet checks keep pump section flooded to maintain prime for reliable performance. Simultaneous Dispenses - Pump long distances and supply fluid to multiple dispense points. $2,540.00
PUMP, 12VDC, 3.8GPM, TRANSFER
GG 25T819
GG 25T819
PUMP, 12VDC, 3.8GPM, TRANSFER
EGP™ Transfer Pump and Dispense Package , 12 VDC, 3.8 gpm (14.4 lpm), 65 psi (4.5 bar) Choose cost-saving convenience with the all-new Graco EGP electric pumps. Attach the EGP transfer pump directly to roll-around barrels for more mobility in more places. These pumps offer the same powerful, high-quality performance you’ve come to expect from Graco — only for less operating cost and more convenience. Use the EGP Transfer Pump in locations where compressed air is unavailable or too cumbersome for shortdistance fluid transfer. Electrical Flexibility - Available in 12 VDC and 115 VAC power options. Smooth Fluid Flow 8 gpm (30 lpm) - Output flow is continuous and non-pulsating up to 8 gpm (30 lpm). Heavy-Duty Motor with Long Life - Industrial-grade electric motors with over-temperature protection on 115 VAC models. Consistent Pressure - Built-in fluid bypass valve protects pump and downstream components. Pump Protection - Includes inlet strainer to keep larger debris out of pump housing and extend pump life. Plug and Play - Self-priming, precision machined pump design. $1,840.00
PUMP, 115V, 7.7 GPM, TRANSFER
GG 25T822
GG 25T822
PUMP, 115V, 7.7 GPM, TRANSFER
EGP™ Transfer Pump and Dispense Package, 115 VAC, 7.7 gpm (29.1 lpm), 65 psi (4.5 bar) Choose cost-saving convenience with the all-new Graco EGP electric pumps. Attach the EGP transfer pump directly to roll-around barrels for more mobility in more places. These pumps offer the same powerful, high-quality performance you’ve come to expect from Graco — only for less operating cost and more convenience. Use the EGP Transfer Pump in locations where compressed air is unavailable or too cumbersome for shortdistance fluid transfer. Electrical Flexibility - Available in 12 VDC and 115 VAC power options. Smooth Fluid Flow 8 gpm (30 lpm) - Output flow is continuous and non-pulsating up to 8 gpm (30 lpm). Heavy-Duty Motor with Long Life - Industrial-grade electric motors with over-temperature protection on 115 VAC models. Consistent Pressure - Built-in fluid bypass valve protects pump and downstream components. Pump Protection - Includes inlet strainer to keep larger debris out of pump housing and extend pump life. Plug and Play - Self-priming, precision machined pump design. $1,095.00
Pm Series Valve, Pm8, 1/2in NPT, Rigig, Af
GG 25U085
GG 25U085
PM SERIES VALVE, PM8, 1/2"NPT, RIGIG, AF
Graco 25U085 PM 8 Electronic Preset Antifreeze Meter - Rigid Extension - 1/2 in. (13 mm) Inlet - NPT
Use Graco’s PM8 and PM20 electronic preset meters to dispense fluids quickly, reliably and accurately to vehicles, trucks, yellow iron machines and more in the most challenging, extreme environments.
- Proven in Harsh Conditions - Sealed electronics (IP69K) are protected against direct pressure washing and dust.
- Twist-Close Nozzle Prevents Leaking - Multiple extensions available including rigid, flexible and gear lube.
- Long-Life Valve Design - Poppet design offers exceptional valve life for heavy usage applications.
- Durable Cast Body - Designed for heavy duty and harsh applications.
- High-Flow Rates - Capable of up to 8 gpm (30.3 lpm).
- Long Battery Life - Features four easily-replaceable AA batteries.
- Series: 8
- Calibration Type: Factory Calibrated
- Compatible Material: Petroleum-Based Oil, Synthetic-Based Oil, Antifreeze
- Dispense Type: Preset
- Display Type: Electronic
- Extension Type: Rigid
- Fluid Inlet Thread Gender: Female
- Fluid Outlet Thread Gender: Female
- Includes: Nozzle, Extension
- Inlet Size (cm): 1.27
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPT
- IP Rating: 69K
- Maximum Flow Rate (cc/min): 30283
- Maximum Flow Rate (cc/sec): 505
- Maximum Flow Rate (GPM): 8
- Maximum Flow Rate (L/min): 30.3
- Maximum Operating Temperature (°C): 52
- Maximum Operating Temperature (°F): 125
- Maximum Recorded Dispense: 19999
- Maximum Storage Temperature (°C): 85
- Maximum Storage Temperature (°F): 185
- Maximum Totalizer: 19999
- Maximum Working Pressure (bar): 13.8
- Maximum Working Pressure (kPa): 1380
- Maximum Working Pressure (MPa): 1.4
- Maximum Working Pressure (psi): 200
- Meter Accuracy: ±0.5
- Meter Accuracy (%): ±0.5
- Meter Pressure Loss (bar): 4.1 Bar at 6 GPM
- Meter Pressure Loss (psi): 60 PSI at 6 GPM
- Meter Technology: Oval Gear
- Metering Gun Weight (kg): 2.4
- Metering Gun Weight (lb): 5.2
- Minimum Flow Rate (GPM): 0.25
- Minimum Operating Temperature (°C): -29
- Minimum Operating Temperature (°F): -20
- Nozzle Type: Manual
- Outlet Size (cm): 1.905
- Outlet Size (in): 3/4
- Outlet Size (mm): 19.05
- Outlet Thread Type: ORB
- Overall Height (cm): 18.3
- Overall Height (in): 7.2
- Overall Height (mm): 183
- Overall Length (cm): 54.4
- Overall Length (in): 21.4
- Overall Length (mm): 544
- Overall Width (cm): 10.4
- Overall Width (in): 4.1
- Overall Width (mm): 103.5
- Recommended Environment: Indoor/Outdoor
$1,275.00
Pm Series Valve, Pm8, 1/2in NPT, Flex, Af
GG 25U086
GG 25U086
PM SERIES VALVE, PM8, 1/2"NPT, FLEX, AF
Graco 25U086 PM 8 Electronic Preset Antifreeze Meter - Flexible Extension - 1/2 in. (13 mm) Inlet - NPT
Use Graco’s PM8 and PM20 electronic preset meters to dispense fluids quickly, reliably and accurately to vehicles, trucks, yellow iron machines and more in the most challenging, extreme environments.
Proven in Harsh Conditions - Sealed electronics (IP69K) are protected against direct pressure washing and dust.
- Twist-Close Nozzle Prevents Leaking - Multiple extensions available including rigid, flexible and gear lube.
- Long-Life Valve Design - Poppet design offers exceptional valve life for heavy usage applications.
- Durable Cast Body - Designed for heavy duty and harsh applications.
- High-Flow Rates - Capable of up to 8 gpm (30.3 lpm).
- Long Battery Life - Features four easily-replaceable AA batteries.
- Series: 8
- Calibration Type: Factory Calibrated
- Compatible Material: Petroleum-Based Oil, Synthetic-Based Oil, Antifreeze
- Dispense Type: Preset
- Display Type: Electronic
- Extension Type: Flexible
- Fluid Inlet Thread Gender: Female
- Fluid Outlet Thread Gender: Female
- Includes: Nozzle, Extension
- Inlet Size (cm): 1.27
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPT
- IP Rating: 69K
- Maximum Flow Rate (cc/min): 30283
- Maximum Flow Rate (cc/sec): 505
- Maximum Flow Rate (GPM): 8
- Maximum Flow Rate (L/min): 30.3
- Maximum Operating Temperature (°C): 52
- Maximum Operating Temperature (°F): 125
- Maximum Recorded Dispense: 19999
- Maximum Storage Temperature (°C): 85
- Maximum Storage Temperature (°F): 185
- Maximum Totalizer: 19999
- Maximum Working Pressure (bar): 13.8
- Maximum Working Pressure (kPa): 1380
- Maximum Working Pressure (MPa): 1.4
- Maximum Working Pressure (psi): 200
- Meter Accuracy: ±0.5
- Meter Accuracy (%): ±0.5
- Meter Pressure Loss (bar): 4.1 Bar at 6 GPM
- Meter Pressure Loss (psi): 60 PSI at 6 GPM
- Meter Technology: Oval Gear
- Metering Gun Weight (kg): 2.4
- Metering Gun Weight (lb): 5.2
- Minimum Flow Rate (GPM): 0.25
- Minimum Operating Temperature (°C): -29
- Minimum Operating Temperature (°F): -20
- Nozzle Type: Manual
- Outlet Size (cm): 1.905
- Outlet Size (in): 3/4
- Outlet Size (mm): 19.05
- Outlet Thread Type: ORB
- Overall Height (cm): 18.3
- Overall Height (in): 7.2
- Overall Height (mm): 183
- Overall Length (cm): 78
- Overall Length (in): 30.7
- Overall Length (mm): 780
- Overall Width (cm): 10.4
- Overall Width (in): 4.1
- Overall Width (mm): 103.5
- Recommended Environment: Indoor/Outdoor
$1,275.00
Voltex System, Table Top, Efr
GG 25U256
GG 25U256
VOLTEX SYSTEM, TABLE TOP, EFR
Graco 25U256 Voltex System Package with Valve, Table Mount Control Box, and Cable Kit for EFR Integration
The Voltex Dynamic Mix Valve is a rotary static valve that consistently mixes and dispenses materials requiring exceptional mixing energy. Engineered with rugged components and precision controls that eliminate dispensing inconsistencies, reduce maintenance downtime, and optimize material usage.
Application: Reliably mixes, recirculates, and dispenses difficult foaming polyurethanes, low viscosity silicones, and other hard to blend two component chemistries.- Easily integrates with Graco EFR meter, mix, and dispense systems with included cables and control box for a complete dispensing solution.
- Control system delivers precision RPM control, and real time monitoring for dispensing process stability.
- Built with durable check valves and disposable mixers that reduce maintenance and downtime.
- Air Inlet Size (in): 5/16
- Air Inlet Size (mm): 8
- Air Inlet Thread Gender: Female
- Maximum Fluid Temperature (°C): 65
- Maximum Fluid Temperature (°F): 149
- Maximum Fluid Temperature (°C): 65
- Maximum Fluid Temperature (°F): 149
- Maximum Fluid Working Pressure (bar): 6.9
- Maximum Fluid Working Pressure (MPa): 6.9
- Maximum Fluid Working Pressure (psi): 1000
- Maximum Operating Temperature (°C): 65
- Maximum Operating Temperature (°F): 149
- Maximum Working Pressure (bar): 68.9
- Maximum Working Pressure (MPa): 6.9
$21,510.00
Voltex System, Table, Recirc, Efr
GG 25U257
GG 25U257
VOLTEX SYSTEM, TABLE, RECIRC, EFR
Graco 25U257 Voltex System Package with Recirculation Valve, Table Mount Control Box, and Cable Kit for EFR Integration
The Voltex Dynamic Mix Valve is a rotary static valve that consistently mixes and dispenses materials requiring exceptional mixing energy. Engineered with rugged components and precision controls that eliminate dispensing inconsistencies, reduce maintenance downtime, and optimize material usage.
Application: Reliably mixes, recirculates, and dispenses difficult foaming polyurethanes, low viscosity silicones, and other hard to blend two component chemistries.- Recirculation controls activate between dispensing to properly suspend mixed materials and prevent premature curing.
- Easily integrates with Graco EFR meter, mix, and dispense systems with included cables and control box for a complete dispensing solution.
- Control system delivers precision RPM control, and real time monitoring for dispensing process stability.
- System package contains all electronic components necessary for running the precision servo motor of the Voltex Dynamic Mix Valve.
- Air Inlet Size (in): 5/16
- Air Inlet Size (mm): 8
- Air Inlet Thread Gender: Female
- Maximum Fluid Temperature (°C): 65
- Maximum Fluid Temperature (°F): 149
- Maximum Fluid Temperature (°C): 65
- Maximum Fluid Temperature (°F): 149
- Maximum Fluid Working Pressure (bar): 6.9
- Maximum Fluid Working Pressure (MPa): 6.9
- Maximum Fluid Working Pressure (psi): 1000
- Maximum Operating Temperature (°C): 65
- Maximum Operating Temperature (°F): 149
- Maximum Working Pressure (bar): 68.9
- Maximum Working Pressure (MPa): 6.9
$31,790.00
VOLTEX SYSTEM, WALL MOUNT, EFR
GG 25U258
GG 25U258
VOLTEX SYSTEM, WALL MOUNT, EFR
Voltex System Package with Valve, Wall Mount Control Box, and Cable Kit for EFR Integration The Voltex Dynamic Mix Valve is a rotary static valve that consistently mixes and dispenses materials requiring exceptional mixing energy. Engineered with rugged components and precision controls that eliminate dispensing inconsistencies, reduce maintenance downtime, and optimize material usage. Reliably mixes, recirculates, and dispenses difficult foaming polyurethanes, low viscosity silicones, and other hard to blend two component chemistries. Easily integrates with Graco EFR meter, mix, and dispense systems with included cables and control box for a complete dispensing solution. Control system delivers precision RPM control, and real time monitoring for dispensing process stability. Built with durable check valves and disposable mixers that reduce maintenance and downtime. System package contains all electronic components necessary for running the precision servo motor of the Voltex Dynamic Mix Valve. $21,670.00
VOLTEX SYSTEM, WALL MT, RECIRC, EFR
GG 25U259
GG 25U259
VOLTEX SYSTEM, WALL MT, RECIRC, EFR
Voltex System Package with Recirculation Valve, Wall Mount Control Box, and Cable Kit for EFR Integration The Voltex Dynamic Mix Valve is a rotary static valve that consistently mixes and dispenses materials requiring exceptional mixing energy. Engineered with rugged components and precision controls that eliminate dispensing inconsistencies, reduce maintenance downtime, and optimize material usage. Reliably mixes, recirculates, and dispenses difficult foaming polyurethanes, low viscosity silicones, and other hard to blend two component chemistries. Recirculation controls activate between dispensing to properly suspend mixed materials and prevent premature curing. Easily integrates with Graco EFR meter, mix, and dispense systems with included cables and control box for a complete dispensing solution. Control system delivers precision RPM control, and real time monitoring for dispensing process stability. Built with durable check valves and disposable mixers that reduce maintenance and downtime. System package contains all electronic components necessary for running the precision servo motor of the Voltex Dynamic Mix Valve. $30,710.00
Transducer, 0-5K, 4.5Vdc, 3/8, W/Cable
GG 25U285
GG 25U285
Transducer, 0-5K, 4.5Vdc, 3/8, W/Cable $639.00
Adapter, Nozzle, Sealer, Spray, Assembly
GG 25U305
GG 25U305
Adapter, Nozzle, Sealer, Spray, Assy $321.00
Dyna-Star Compact System, Cds 60#, Glc2200 No Afso
GG 25U315
GG 25U315
Dyna-Star Compact System, Cds 60#, Glc2200 No Afso $10,400.00
Dyna-Star Compact System, Cds 60#, Glc2200 Afso
GG 25U316
GG 25U316
Dyna-Star Compact System, Cds 60#, Glc2200 Afso $11,900.00
Dyna-Star Compact System, Cds 60#, Glcx No Afso
GG 25U317
GG 25U317
Dyna-Star Compact System, Cds 60#, Glcx No Afso $10,870.00
DYNA-STAR COMPACT SYSTEM, CDS 60#, GLCX AFSO
GG 25U318
GG 25U318
DYNA-STAR COMPACT SYSTEM, CDS 60#, GLCX AFSO
DYNA-STAR COMPACT SYSTEM,CDS 60#,GLCX AFSO $12,350.00