GRACO INC. S10595

GG 24W351

ENDURA-FLO PUMP, 4:1 AODD, 350, TRI, STD

GG 24W633

RESERVOIR, 4 PINT, 118:1, RH

Graco Manzel box lubricators – when quality and delivery matter! Made with Graco quality for long life and durability, the Manzel MB118 is the right size for triplex and quintuplex mud pump applications.

MB118 is the right size for triplex and quintuplex mud pump applications.Provide a proven, cost-effective way to assemble customized oil systems that meet specific requirements by using standard modular componentsIncrease opportunities to standardize lube system components and reduce lube maintenance and service costs4 pint (1.9 liter) reservoir (4 pump stations max), no pumps installed, 118:1 drive on RH endComplete the system with the easy to install GBL 7500 pump units of your choice

GG 24W617

KIT, REPLACEMENT, PISTON ROD, PC

GG 24W619

KIT, REPLACEMENT, CYLINDER, PC

GG 24X167

LSR F4-55 SYSTEM, 55GAL/55GAL, CASTERS

In the manufacturing of liquid silicone rubber products, precision is paramount. Material waste is an expensive problem and substandard products are an intolerable failure. Minimize both with the Graco Fluid Automation F4-55.

Precise ratio control, minimal material waste

• The F4-55 system takes the ability to meter material flow to an almost microscopic level. Its helical gear uses multiple gear teeth to measure flow in very small increments. The increased number of measurements offers more assurance the machine remains on-ratio.
• The result: More precise mixing, a better end product and less wasted material.

Easier operation with Graco Control Architecture

• The Graco Fluid Automation F4-55 system features intuitive user interfaces based on the Graco Control Architecture (GCA), a modular system of processing and control components. GCA makes maintenance and service easy, thanks to built-in troubleshooting tools

Better Color Control

• Mix two additive streams at ratios ranging from 0.5 to 6%

Easy Set-up and Operation

• Proprietary Graco Control Architecture (GCA) is user friendly, providing easier operation and troubleshooting

Maintains Material Integrity

• Stainless steel components meet the standard for clean room applications to prevent contamination, and cure inhibition and discoloration of material

Cleanroom Convenience

• A smaller footprint and casters (optional on F4-55) allow for system movement and maintenance

GG 24X425

CHEMSAFE PUMP, 515PT-P01A-PT3-PT-PT-PO-P

Graco's ChemSafe pumps feature PTFE or UHMWPE (ultra high molecular weight polyethylene) corrosion-resistant fluid paths, which make them ideal for corrosive and abrasive chemicals. There's no exposed metals and they can be configured in various materials to meet most abrasion, temperature, and chemical compatibility requirements. Plus they're dead-head capable and achieve high flow rates while minimizing air consumption and operational noise.

GG 24X427

CHEMSAFE PUMP, 307PT-P01A-PT3-PT-PT-PO

Graco's ChemSafe pumps feature PTFE or UHMWPE (ultra high molecular weight polyethylene) corrosion-resistant fluid paths, which make them ideal for corrosive and abrasive chemicals. There's no exposed metals and they can be configured in various materials to meet most abrasion, temperature, and chemical compatibility requirements. Plus they're dead-head capable and achieve high flow rates while minimizing air consumption and operational noise.

GG 24X663

HEAD, MOLSA, 100-1.04MM/4-.041IN

Multi-Orifice Linear Stream Applicator (MOLSA) gives you faster cycle rates, more accurate dispensing and longer production life compared to competitive offerings.

Ideal for applying liquid applied sound deadener (LASD) using the Graco 1K Ultra-Lite dispense valve.

Port Plug Model

4.00 inches (102 mm) wide

0.041 inch (1.04 mm) orifice diameter

GG 24W355

ENDURA-FLO PUMP, 4:1 AODD, 350, NPT, ADV

GG 24W830

KIT, REPLACEMENT, HOSE, CPLD, QD

GG 24W913

KIT, OVERHAUL, CS, GL-33

GL33 overhaul kit, carbon steel

GG 24W353

ENDURA-FLO PUMP, 4:1 AODD, 350, BSP, STD

GG 24W354

ENDURA-FLO PUMP, 4:1 AODD, 350, TRI, ADV

GG 24W352

ENDURA-FLO PUMP, 4:1 AODD, 350, NPT, STD

GG 24W350

ENDURA-FLO PUMP, 4:1 AODD, 150, BSP, ADV

GG 24W473

HYDRA-CLEAN SYSTEM, AIR, 30:1, CART

Clean up your facility the quick, easy and efficient way with Graco Hydra-Clean pressure washers! Designed with Graco’s NXT air motor, it's ideal for industrial and sanitary applications including food processing facilities, heavy duty cleaning, maintenance, shipyards, oil rigs and more.

GG 24W479

TIMER, GREASE JOCKEY, DELPHI 56

GG 24W345

ENDURA-FLO PUMP, 4:1 AODD, 150, TRI, STD

GG 24W346

ENDURA-FLO PUMP, 4:1 AODD, 150, NPT, STD

GG 24Y678

REACTOR HEATED HOSE, X-WRAP, 3/8, 50'

Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

New multi-strand copper heating element has greatly increased hose quality:

• Provides 10-times* the flex life compared to previous flat copper heating element
• Long-term, even heating without hot spots
• Backwards compatible with existing Reactor heated hoses

New Xtreme-Wrap Scuff Guard

• Form fitting to the hose, no more baggy excess material
• Made from urethane coated ballistic nylon for puncture and tear resistance, abrasion protection, and oil and water resistance
• Sheds surface moisture and won't absorb water to weigh down the hose bundle; will not freeze solid in cold temperatures
• Hook and Loop enclosure used on the entire length of the hose for easy access to the hoses, fittings, and fluid temperature sensors

Joint Protectors

• Joint Protectors provide additional protection at the most vulnerable section of the hose: the electrical connections, hose fittings, and fluid temperature sensors. All 50 ft (15 m) hoses with the new Xtreme-Wrap will come with one Joint Protector.

GG 24Z028

LUBEPRO A2800 PUMP, OIL, 2.0L, N.C, LL

Without proper lubrication your factory's machines can suffer from downtime and reduced life, which impacts your company's bottom line. Avoid the hassle. LubePro series leverages the same proven quality and leading technology as Graco's Fire-Ball pump - the leader in durability and quality for over 50 years.

GG 256200

T1 PUMP

Graco's family of transfer pumps maintain performance in any environment. Transfer pumps are required to feed chemical to your Reactor spray machine or any other equipment requiring fluid transfer. Consider your material viscosities, desired output rate, interior ceiling height of your rig, and available air pressure when choosing your ideal transfer pump.

GG 256216

LDP5 VALVE, METERED, RIGID EXT

Graco's LDP5 meters are perfect for lower-volume service application in small service shops, fast lube centers and automotive dealerships. These meters are capable of metering petroleum, synthetic based oil and anti-freeze up to 5 gpm (19 lpm).

Typical applications include Automotive dealerships, Heavy-duty dealerships, Fast lube centers, Fleet service facilities, Service shops, and In-plant.

GG 255442

MD2 VALVE, ASSY, 1:1, HS, GUN, AIR

GG 256486

MATRIX METER VALVE, 15, RIGID

Ultra-durable Matrix meters stand up to tough use, backed by a 7-year warranty (3 years on electronics). The keypad gives technicians control right from the meter, and dispense data can be associated with the work order for paperless transactions.

Large LCD Display and Simple Operator Controls

• Adjusts for reading in all lighting conditions with easy set up and navigation.

Long Battery Life

• Uses four off-the-shelf batteries – no charging station needed.

Wireless Radio

• Built-in radio

Fluid Extension Kits

• Rigid extension with automatic flush-mount nozzle design

Fluid Swivel

• 1/2 inch NPT fluid inlet option meets standard and high-flow requirements

GG 255901

MD2 VALVE, DISPENSE, 1:1, ELITE, SNUFF

GG 255902

MD2 VALVE, DISPENSE, 10:1, ELITE, SNUFF

GG 256548

REACTOR HEATED HOSE, 3500, W/SCUFF, 1/2", 50'

Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

New multi-strand copper heating element has greatly increased hose quality:

• Provides 10-times* the flex life compared to previous flat copper heating element
• Long-term, even heating without hot spots
• Backwards compatible with existing Reactor heated hoses

GG 256957

KIT, REPAIR, CHECK VALVE COMPLETE

Allows more air pressure into the material cup to spray heavier material

Easily clean and reuse versus replace

Located by gun to reduce clogged valves due to paint contamination

GG 255510

KIT, COMPLETE SEAL, L200CM

GG 255446

MD2 VALVE, ASSY, 10:1, HS, GUN, ELEC

GG 255900

MD2 VALVE, DISPENSE, 1:1, ELITE

GG 255518

KIT, CMPL. SEAL, L500CM

GG 255249

LEVER, 2K DISPENSE VALVE

GG 255277

LDP5 VALVE, METERED, FLEX EXT

Graco's LDP5 meters are perfect for lower-volume service application in small service shops, fast lube centers and automotive dealerships. These meters are capable of metering petroleum, synthetic based oil and anti-freeze up to 5 gpm (19 lpm).

Typical applications include Automotive dealerships, Heavy-duty dealerships, Fast lube centers, Fleet service facilities, Service shops, and In-plant.

GG 24Z015

PROMIX 2KE PROPORTIONER, METER, ACID

GG 255179

MD2 VALVE, DISPENSE, 1:1, SOFT SEATS

GG 255180

MD2 VALVE, DISPENSE, 1:1 HARD SEATS

GG 255181

MD2 VALVE, DISPENSE, 10:1, SOFT SEATS

GG 253626

KIT, DIAPHRAGM, PTFE-EPDM, 1040

GG 255182

MD2 VALVE, DISPENSE, 10:1 HARD SEATS

GG 255206

HANDLE, VALVE, AIR

GG 255204

KIT, REPAIR, PUMP

GG 255208

HANDLE, 2K DISP. VALVE, ELEC.

GG 255060

KIT, DIAPHRAGM-F2 PT

GG 255061

KIT, REPAIR, AIR VALVE, SST

GG 258694

LDP5 VALVE, METERED, FLEX EXT

Graco's LDP5 meters are perfect for lower-volume service application in small service shops, fast lube centers and automotive dealerships. These meters are capable of metering petroleum, synthetic based oil and anti-freeze up to 5 gpm (19 lpm).

Typical applications include Automotive dealerships, Heavy-duty dealerships, Fast lube centers, Fleet service facilities, Service shops, and In-plant.

GG 258664

HYDRA-CLEAN SYSTEM, 40:1 CART MT

Clean up your facility the quick, easy and efficient way with Graco Hydra-Clean pressure washers! Designed with Graco’s NXT air motor, it's ideal for industrial and sanitary applications including food processing facilities, heavy duty cleaning, maintenance, shipyards, oil rigs and more.

GG 258840

RS GUN, ASM, EXT MIX, GEL

Innovations engineered into the Graco RS Gel Coat Gun are sure to make a difference in your production uptime. It's lightweight, ergonomic, designed for tool-less operation and fast, easy maintenance as well. It’s available in internal and external mixing gelcoat spray guns. Discover how the Graco RS Resin Spray Gun’s revolutionary design and industry-first features can help boost your company’s bottom line.

Makes production easier

• Simple, quick start up and shut down
• Quick tool-less blade change
• No need to adjust needle settings after maintenance

Improves product quality

• Lightweight cutter gives better chopping control
• Easy one-hand cutter speed control
• Superior spray pattern

Improves operator comfort for increased job satisfaction

• Lighter, ergonomic gun reduces fatigue
• Lets you quickly adjust anvil tension to correct cut variations due to anvil and blade wear
• No problems soaking the RS Gun in solvents overnight

Saves material costs

• Air Assist Containment (AAC®) standard on all RS Guns
• Lower pressure reduces overspray

GG 258852

RS GUN, ASM, EXT MIX, CHOP

Innovations engineered into the Graco RS Gel Coat Gun are sure to make a difference in your production uptime. It's lightweight, ergonomic, designed for tool-less operation and fast, easy maintenance as well. It’s available in internal and external mixing gelcoat spray guns. Discover how the Graco RS Resin Spray Gun’s revolutionary design and industry-first features can help boost your company’s bottom line.

Makes production easier

• Simple, quick start up and shut down
• Quick tool-less blade change
• No need to adjust needle settings after maintenance

Improves product quality

• Lightweight cutter gives better chopping control
• Easy one-hand cutter speed control
• Superior spray pattern

Improves operator comfort for increased job satisfaction

• Lighter, ergonomic gun reduces fatigue
• Lets you quickly adjust anvil tension to correct cut variations due to anvil and blade wear
• No problems soaking the RS Gun in solvents overnight

Saves material costs

• Air Assist Containment (AAC®) standard on all RS Guns
• Lower pressure reduces overspray

GG 258853

RS GUN, ASM, INT MIX, GEL

Innovations engineered into the Graco RS Gel Coat Gun are sure to make a difference in your production uptime. It's lightweight, ergonomic, designed for tool-less operation and fast, easy maintenance as well. It’s available in internal and external mixing gelcoat spray guns. Discover how the Graco RS Resin Spray Gun’s revolutionary design and industry-first features can help boost your company’s bottom line.

Makes production easier

• Simple, quick start up and shut down
• Quick tool-less blade change
• No need to adjust needle settings after maintenance

Improves product quality

• Lightweight cutter gives better chopping control
• Easy one-hand cutter speed control
• Superior spray pattern

Improves operator comfort for increased job satisfaction

• Lighter, ergonomic gun reduces fatigue
• Lets you quickly adjust anvil tension to correct cut variations due to anvil and blade wear
• No problems soaking the RS Gun in solvents overnight

Saves material costs

• Air Assist Containment (AAC®) standard on all RS Guns
• Lower pressure reduces overspray

GG 257030

GTX SPRAYER, COMPRESSORLESS

• Jobsite Proven Performance
• Texture delivery rates to 4.0 gpm from durable, high-output 1-inch pump
• Durable, User-Friendly Spraying

• Durable, User-Friendly Spraying
• Pump heavy mud mixes and larger aggregate with oversized fluid passages
• Quick nozzle changes with extra-coarse gun head threads

• Longer Spray Time
• Easy cleanup and removal with no-tools

• Complete Control
• Produce precise, consistent and repeatable texture finishes

• Improved Handling & Flexibility
• Both hoses are permanently bonded together for easy handling
• Oversized grip with no-tools hose connection

• Moisture Build-Up Eliminated
• Automatically filters air to keep your sprayer running at optimal performance

• Simulated Acoustic (Popcorn)
• Orange Peel & Fine Splatter
• Splatter
• Knockdown
• Textured Acrylics & Elastomerics
• EIFS & Synthetic Stucco Finish Coats

GG 24Z098

KIT, CONTROLLER-VOLT, BELL-SB

GG 24Y778

KIT, MODULE, GCA, MCM, SALEABLE

GG 24Z125

METER, PRESET, 60 QRT, RIGID, NPT

Mechanical meters are ideal for indoor or outdoor use in all size shops, typically handling applications in automotive dealerships, fast lube centers, and service shops. The meter featured is fitted with a multiple nozzle and extension options and are capable of pumping oil up to 8 gpm (30.2 lpm).

GG 24Z686

GREASE JOCKEY INJECTOR, MTR, ASSY, #4

Designed for frequent, medium-pressure metering and includes system pressure monitoring.

GG 24Z728

PULSE PRO PUMP AIR CONTROL VALVE, NPT

Graco’s Pulse® Pump Air Control (PAC) is integral to the Pulse fluid management system. These reliable devices prevent unauthorized access to fluid inventory.

GG 24Z509

CSP VALVE, 16 OUTLET, NPT, IND, PKG

Compact Series Progressive (CSP) valve with broad market versatility. Combine with field-proven G-Series pumps for a complete system solution.

GG 24Z962

KIT, COVER, FRONT, NO LOGO, CLEAR

GG 24Z834

T3 PUMP, CS

GG 24Z016

PROMIX 2KE PROPORTIONER, METER, ACID

GG 24Z013

PROMIX 2KE PROPORTIONER, METER, ACID

GG 24Z486

CSP VALVE, 6 OUTLET, NPT, PKG

Compact Series Progressive (CSP) valve with broad market versatility. Combine with field-proven G-Series pumps for a complete system solution.

GG 24Z487

CSP VALVE, 8 OUTLET, NPT, PKG

Compact Series Progressive (CSP) valve with broad market versatility. Combine with field-proven G-Series pumps for a complete system solution.

GG 24Z014

PROMIX 2KE PROPORTIONER, METER, ACID

GG 24Y864

SD SERIES 5 REEL, CORD, BLK, TRIPLUG, GFCI

Organize your work space for a safer, more productive work environment. Make Graco your single source for your entire reel bank.

Adjustable Arm - Easily change the arm position to fit more applications. Works on walls, ceilings or bench mounts.

Heavy-Duty Pedestal - High-strength steel construction with rolled edges and ribbed stress points that won't flex or twist.

GG 24Y849

KIT, LEAK DETECTOR, SOLOTECH

GG 258970

RS GUN, ASM, EXT MIX, CHOP

Innovations engineered into the Graco RS Gel Coat Gun are sure to make a difference in your production uptime. It's lightweight, ergonomic, designed for tool-less operation and fast, easy maintenance as well. It’s available in internal and external mixing gelcoat spray guns. Discover how the Graco RS Resin Spray Gun’s revolutionary design and industry-first features can help boost your company’s bottom line.

Makes production easier

• Simple, quick start up and shut down
• Quick tool-less blade change
• No need to adjust needle settings after maintenance

Improves product quality

• Lightweight cutter gives better chopping control
• Easy one-hand cutter speed control
• Superior spray pattern

Improves operator comfort for increased job satisfaction

• Lighter, ergonomic gun reduces fatigue
• Lets you quickly adjust anvil tension to correct cut variations due to anvil and blade wear
• No problems soaking the RS Gun in solvents overnight

Saves material costs

• Air Assist Containment (AAC®) standard on all RS Guns
• Lower pressure reduces overspray

GG 258971

RS GUN, ASM, INT MIX, CHOP

Innovations engineered into the Graco RS Gel Coat Gun are sure to make a difference in your production uptime. It's lightweight, ergonomic, designed for tool-less operation and fast, easy maintenance as well. It’s available in internal and external mixing gelcoat spray guns. Discover how the Graco RS Resin Spray Gun’s revolutionary design and industry-first features can help boost your company’s bottom line.

Makes production easier

• Simple, quick start up and shut down
• Quick tool-less blade change
• No need to adjust needle settings after maintenance

Improves product quality

• Lightweight cutter gives better chopping control
• Easy one-hand cutter speed control
• Superior spray pattern

Improves operator comfort for increased job satisfaction

• Lighter, ergonomic gun reduces fatigue
• Lets you quickly adjust anvil tension to correct cut variations due to anvil and blade wear
• No problems soaking the RS Gun in solvents overnight

Saves material costs

• Air Assist Containment (AAC®) standard on all RS Guns
• Lower pressure reduces overspray

GG 25A998

MODULE, STACK, LG MXR, VLV, CLR

Straight Thread Single-Pass Mixing Stack designed for Graco F-5 two-component LSR equipment.

Reduce downtime and increase production with mixing stacks.

Reduce pressure drops

• High-flow material passages on the regulator are 225% larger which reduces pressure drops through the barrel stack.

GG 25B021

APPLICATOR, GM100, SINGLE, 24VDC, PT100

With the InvisiPac Hot Melt Adhesive Applicator, you’ll experience a new era in hassle-free operation with improved uptime. With its innovative free-flow manifold design and integrated applicator filtering – when used with the InvisiPac System – you can eliminate nozzle plugs. You’ll finally have a hot melt system that runs reliably, unnoticed and invisible.

Adhesive is processed in a better way

• The applicator's free-flow manifold design is engineered to eliminate dead zones where char will build up
• Module includes an integrated filter assembly near the ball and seat junction that eliminates nozzle plugging
• Adhesive spends less time at high temperature, resulting in less char
• Changes in the heated hose construction significantly reduce the formation of char in the hose itself
• Less char allows you to use lower cost adhesives and save money

GG 25C537

TANK, HIGH PRESS, AGIT 10 GAL

GG 25C536

TANK, HIGH PRESS, AGIT 5 GAL

GG 25C535

AGITATOR, HELIX, CS

GG 25C538

TANK, HIGH PRESS, AGIT 15 GAL

GG 25C841

METER, ELECTRONIC, IM20, 3/4 NPT

Graco's IM20 in-line meter is designed to last and is capable of measuring a variety of fluids up to 20 gpm (75.7 lpm) flow rates. The IM20 is backed by our robust warranty and features upgraded electronics and an easy-to-read LCD screen with simple operator controls that measures in quarts, gallons, pints and liters.

GG 25C765

KIT, MOTOR, RADIAL PISTON AIR

GG 25C818

KIT, SEAT 1050M SS

GG 25C411

SANIFORCE DRUM PUMP, CENT , FDA, 39", 115V

Reduce maintenance and sanitization time at your facility with the SaniForce Drum Pump, designed for easy cleaning with quick tri-clamp connections, no moving parts and easy transferability.

Easy Cleaning and Product Changeover

• With this simple knock down design, cleaning between drums or product changeovers has never been easier!

Operational Flexibility Throughout Your Facility

• With the electric pump operation, you simply plug it in to be ready for transfer in minutes!

Easy Mobility

• The light weight design allows all operators to move pumps between drums to increase facility output.

GG 25C486

AGITATOR, BACK GEAR, SIPHON

GG 25C528

AGITATOR, DIRECT DRIVE, SST

GG 25C534

AGITATOR, HELIX, SST

GG 25C533

AGITATOR, DIRECT DRIVE, CS

GG 25C530

AGITATOR, EXPANDING BLADE

GG 25C532

AGITATOR, SIPHON TWISTORK

GG 25C462

AGITATOR, ASSY, PRESSURE TANK 5 GAL

GG 25C471

AGITATOR, ASSY, PRESSURE TANK, 15 GAL

GG 25C529

AGITATOR, AIR, OUTBOARD

GG 25C487

AGITATOR, BACK GEAR, ATEX

GG 25C454

AGITATOR, ASSY, DIRECT DRIVE

GG 25C485

AGITATOR, BACK GEAR

GG 25C473

AGITATOR, ASSY, PRES TANK, 15 GAL, ATEX

GG 25B296

KIT, PROCONTROL 1KE PLUS

GG 25C418

SANIFORCE DRUM PUMP, 3A, 47", 115V

Reduce maintenance and sanitization time at your facility with the SaniForce Drum Pump, designed for easy cleaning with quick tri-clamp connections, no moving parts and easy transferability.

Easy Cleaning and Product Changeover

• With this simple knock down design, cleaning between drums or product changeovers has never been easier!

Operational Flexibility Throughout Your Facility

• With the electric pump operation, you simply plug it in to be ready for transfer in minutes!

Easy Mobility

• The light weight design allows all operators to move pumps between drums to increase facility output.

GG 25C420

SANIFORCE DRUM PUMP, PC , 39", 115V

Reduce maintenance and sanitization time at your facility with the SaniForce Drum Pump, designed for easy cleaning with quick tri-clamp connections, minimal moving parts and easy transferability.

GG 25C451

AGITATOR, BACK GEAR, SIPHON

GG 25C157

KIT, FLANGE, SOLOTECH 30, BUNA

GG 25C861

LSR SYSTEM, 1:1 EXTRUDER, 5/5GAL

GG 25C979

KIT, ELBOW, 15K784, 5 PK

GG 25C983

KIT, DOUBLING, OUTPUT