GRACO INC. S10595
Module, G-Barrier, Power Supply
GG 26C724
MODULE,G-BARRIER, POWER SUPPLY
- Compatible Material: Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC
Kit, Cs T4, Pump/Fluid/Air
GG 26D003
KIT, CS T4, PUMP/FLUID/AIR
Graco 26D003 T4 Complete Package: Includes 2 Pumps (Carbon Steel), 2 Supply Hoses, Air Supply Kit and Desicant Dryer Kit
Transfer Pumps are required to move A and B materials to the Reactor Spray Systems. The T4 Transfer Pump combines Graco's proven Merkur air-motor and carbon steel lower. The T4 is a 3:1 ratio pump with ProConnect technology - allowing you to quickly connect and disconnect the air motor from the pump lower.
- Quick Transfer Between Drums - quickly change to a new drum of material without the mess of dripping chemical by using multiple pump lowers.
- Easier to Maneuver - easily transfer the T4 pump between drums by quickly disconnecting the air motor from the lower before transferring. This makes the pump lighter weight and reduces the necessary ceiling height of your rig.
- Eliminate Downtime - get up and running quickly when your pump lower requires maintenance by having a spare pump lower that can easily be installed.
- Model: T4
- Material: Carbon Steel
- Package Options: Air Supply & Supply Hose
Valve, Dispense, Mdx
GG 26D274
VALVE, DISPENCE, MDX
Graco 26D274 MDX, High flow valve, 2-component
The Graco MDX valve is designed for a two-component high flow dispensing application. The high wear resistance design enables an excellent life performance even with dispensing highly abrasive material such as Thermal Interface Material. It`s a perfect fit in EV battery pack, solar energy, wind power and etc. markets.
Application: High flow rate dispensing, 2 component- High flow rate
- Easy intergration for automation
- High wear resistance for reduced maintainance
- Recirculation function keeps material from settling.
- Model: MD2
- Series: MDX
- Fluid Outlet Thread Gender: Male
- Maximum Operating Temperature ( degree C): 70
- Maximum Operating Temperature ( degree F): 158
- Overall Height (cm): 29.5
- Overall Height (in): 11.62
- Overall Height (mm): 295
- Overall Width (cm): 14.5
- Overall Width (in): 5.72
- Overall Width (mm): 145.30000000000001
Line Lazer es 500 Battery Powered Airless
GG 25U546
LINELAZER SPRAYER, ES500, NA
Graco 25U546 LineLazer ES 500 Battery-Powered Airless Line Striper
The LineLazer ES 500 is a fully-capable line striper for those small to medium-sized re-stripe jobs - while introducing the benefits of battery-powered technology.
Application: All fluid passageways are upgraded for use with fast-dry, waterborne traffic paints - hose, gun and fittings.NO ENGINE NOISE, VIBRATION OR FUMES
Benefits of Battery Power Over a Gas Engine- Reduce user fatigue while delivering perfect lines
- Improved jobsite conditions
EXTENDED RUNTIME
DEWALT 9.0 Ah FlexVolt Battery- Spray up to 10 gallons with two fully charged DEWALT FlexVolt batteries
- Capable of completing 200+ parking lot stalls
FAST CHARGING
DEWALT Fan-Cooled Fast Charger- Quickly charges battery in under 60 minutes
- Allows contractors to finish jobs without interruptions
IMPROVED TRACKING AND LINE QUALITY
Proven Frame Design- Durable, steel construction
- Accepts 15-gallon hopper and EZ Bead System
EASIER MANEUVERABILITY
Front Swivel Wheel- Ability to stripe right up to the curb
- Makes easy work of hard-to-do curves
- Years of dependable operation with tapered locking pin design
THE LONGEST LASTING DRIVE
Advantage Drive- Hardened steel gears provide extremely quiet operation and a lifetime warranty
DURABLE PUMP
Endurance Pump- Last 2X longer than the next leading brand
- Long life V-Max Blue Packings, Chromex rod, and hardened stainless steel cylinder
- Faster cleaning with the QuikAccess intake valve
ELIMINATE COSTLY DOWNTIME
ProConnect Pump Replacement- Swap pump in minutes - no tools, pins or parts to lose
EASY MAINTENANCE AND LESS CLOGGING
Easy Out Filter- Exclusive inside-out filtering design reduces tip clogs
- Model: LineLazer
- Series: ES 500
- Product Series: Standard
- Attachments: None
- Number of Guns: 1
- Power Source: Battery Powered
KIT, ACCESSORY, HAZ I/O CABLE
GG 25V080
KIT, ACCESSORY, HAZ I/O CABLE
Graco 25V080 QUANTM Pump Input/Output (I/O) Cable
For use with QUANTM electric double diaphragm pumps that are certified for use in explosive athospheres or hazardous (classified) locations.
- For Use With: QUANTM Electric Double Diaphragm Pump
- Includes: 1 cable clamp assembly, 2 clamp fasteners, 1 ground fastener
- Maximum Operating Temperature ( degree C): 40
- Maximum Operating Temperature ( degree F): 104
- Minimum Operating Temperature ( degree C): -20
- Minimum Operating Temperature ( degree F): -4
Kit, Stator Cap, I30(Qtc)
GG 25V129
KIT, STATOR CAP, I30(QTC)
Graco 25V129 QUANTM i30 Stator Cap Kit
- Model: QUANTM
- Series: i30
Petroleum Piston Hand Pump
GG 260407
PUMP, PISTON HAND, FUEL
Graco 260407 Piston Hand Pump for Petroleum Products
- Lightweight die cast aluminum construction
- Corrosion resistant design
- High quality piston seals are designed for long life and smooth operation.
- Adjustable bung adapter allows pump to be rotated
- One quart per stroke gives fast, efficient fluid transfer
- Locking mechanism prevents unauthorized dispensing
- Application: Industrial
- Compatible Material: Oil, Grease
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (in): 0.75
- Fluid Outlet Size (mm): 19.05
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Includes: Hose, Die Cast Aluminum Nozzle, Inlet Suction Tube, Bung Adapter
Kit, I80, Ss, Pt, Po, Pt
GG 25V317
KIT, I80(QTD)SS, PT, PO, PT
Graco 25V317 QUANTM i180 Complete Fluid Repair Kit with SS Seat, PT Ball, PO Diaphragm and PT Seal
QUANTM i30 Complete Fluid Repair Kit with SS Seat, PT Ball, PO Diaphragm and PT Seal
GG 25V267
KIT, I30(QTC)SS, PT, PO, PT
Graco 25V267 QUANTM i30 Complete Fluid Repair Kit with SS Seat, PT Ball, PO Diaphragm and PT Seal
Reactor Heated Hose, 25 ft, 3/8 w/o Cable
GG 261328
REACTOR HEATED HOSE, 25', 3/8, W/O CABLE
Graco 261328 25 ft (7.6 m) Heated 2 Component Low Pressure Hose with 3/8 in (9.5 mm) Inside Diameter and Ground Wire
Graco's heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.
Application: For Reactor proportioners.- New multi-strand copper heating element has greatly increased hose quality:
- Copper-heated hoses are designed specifically for use with Graco proportioners
- Covered with proprietary butyl cover for protection against moisture sensitive isocyanate
- Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together
- Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings
- Helix-design whip hose uses braided copper wires for added flexibility and longer life
Provides 10-times* the flex life compared to previous flat copper heating element
Long-term, even heating without hot spots
Backwards compatible with existing Reactor heated hoses
- Model: Reactor Heated Hoses
- Series: No Scuff
- Hose Heating Type: External Heated
- Hose Length (ft): 25
- Hose Length (m): 7.6
- Maximum Working Pressure (bar): 138
- Maximum Working Pressure (kPa): 13800
- Maximum Working Pressure (MPa): 13.8
- Maximum Working Pressure (psi): 2000
Hose, Heated, 1/4x3/8, Dual Cable
GG 261337
REACTOR HEATED HOSE, 1/4X3/8, DUAL CABLE
Graco 261337 50 ft (15 m) Heated Custom Application 2 Component Hose with 3/8 (9.5 mm) and 1/4 in (6.3 mm) Inside Diameter
Graco's heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.
Application: For Reactor proportioners.- New multi-strand copper heating element has greatly increased hose quality:
- Copper-heated hoses are designed specifically for use with Graco proportioners
- Covered with proprietary butyl cover for protection against moisture sensitive isocyanate
- Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together
- Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings
- Helix-design whip hose uses braided copper wires for added flexibility and longer life
Provides 10-times* the flex life compared to previous flat copper heating element
Long-term, even heating without hot spots
Backwards compatible with existing Reactor heated hoses
- Model: Reactor Heated Hoses
- Series: Specialty
- For Use With: Plural Component Proportioners
- Hose Inside Diameter (in): 1/4
- Hose Inside Diameter (mm): 6.35
- Hose Length (ft): 50
- Hose Length (m): 15.2
- Maximum Working Pressure (bar): 241
- Maximum Working Pressure (kPa): 24100
- Maximum Working Pressure (MPa): 24.1
- Maximum Working Pressure (psi): 3500
Linedriver Module, 160Cc
GG 262004
LINEDRIVER MODULE, 160CC
Graco 262004 LineDriver Ride-On Attachment
Why walk when you can ride? Graco LineDriver Systems provide the most innovative, user-friendly ride-on systems in the industry. The LineDriver is the industry standard ride-on system that will help you maximize productivity on any striping, thermoplastic and scarifying application.
- FlexBeam LED Light System
LED light for improved brightness with long life and less amp draw
Retractable, breakaway design prevents damage and keeps you striping
- Patented Dual Foot Pedal System
For forward and reverse
Easily move between jobs without having to push
- ProStart Engine Starting System
Easy Starting
Up to 50% less pulling effort to start the engine - no more broken recoils
Outperforms manual pull and electric start systems when the weather starts turning cooler
- Cool-Comfort Seat
Gray color stays cool in direct sunlight
High-back seat for added support
Extra padding for all-day comfort
- Model: LineDriver
- Engine Brand: Honda
- Engine Model: GX Engine
- For Use With: GrindLazer, ThermoLazer 300TC, ThermoLazer ProMelt, LineLazer 130HS, LineLazer ES 1000, LineLazer V 200HS, LineLazer V 250DC, LineLazer V 250SPS, LineLazer V 3900, LineLazer V 5900
- Fuel Tank Capacity (gal): 0.95
- Fuel Tank Capacity (L): 3.6
- Maximum Operating Speed (km/h): 16
- Maximum Operating Speed (mph): 10
- Maximum Reverse Speed (km/h): 10
- Maximum Reverse Speed (mph): 6
- Power Rating (cc): 160
- Power Rating (HP): 5.5
- Power Rating (kW): 4.1
Linedriver HD Ride - On Attachment
GG 262005
LINEDRIVER MODULE, HD 200CC
Graco 262005 LineDriver HD Ride-On Attachment
Why walk when you can ride? Graco LineDriver Systems provide the most innovative, user-friendly ride-on systems in the industry. The LineDriver HD provides the higher power and performance you need to maximize your productivity on any striping, thermoplastic and scarifying application.
- FlexBeam LED Light System
LED light for improved brightness with long life and less amp draw
Retractable, breakaway design prevents damage and keeps you striping
- Patented Dual Foot Pedal System
For forward and reverse
Easily move between jobs without having to push
- ProStart Engine Starting System
Easy Starting
Up to 50% less pulling effort to start the engine - no more broken recoils
Outperforms manual pull and electric start systems when the weather starts turning cooler
- Cool-Comfort Seat
Gray color stays cool in direct sunlight
High-back seat for added support
Extra padding for all-day comfort
- Model: LineDriver
- Series: HD
- Engine Brand: Honda
- Engine Model: GX Engine
- For Use With: LineLazer, GrindLazer, ThermoLazer
- Fuel Tank Capacity (gal): 0.95
- Fuel Tank Capacity (L): 3.6
- Maximum Operating Speed (km/h): 16
- Maximum Operating Speed (mph): 10
- Maximum Reverse Speed (km/h): 10
- Maximum Reverse Speed (mph): 6
- Power Rating (cc): 200
- Power Rating (HP): 6.5
Payment options
