GRACO INC. S10595
GRACO INC. S10595 branded products
SILVER FLAT TIP, SPRAY TC
GG 163509
GG 163509
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 509 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 509 Silver Flat Tip has a 0.009 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
FF FLAT TIP, SPRAY TC
GG 163510
GG 163510
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 510 The 510 Fine Finish Flat Tip produces a 10 to 12 inch fan pattern and a 0.010 inch orifice. $66.00
FF FLAT TIP, SPRAY TC
GG 163512
GG 163512
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 512 The 512 Fine Finish Flat Tip produces a 10 to 12 inch fan pattern and a 0.012 inch orifice. $66.00
SILVER FLAT TIP, SPRAY TC
GG 163513
GG 163513
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 513 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 513 Silver Flat Tip has a 0.013 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
FF FLAT TIP, SPRAY TC
GG 163518
GG 163518
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 518 The 518 Fine Finish Flat Tip produces a 10 to 12 inch fan pattern and a 0.018 inch orifice. $66.00
FF FLAT TIP, SPRAY TC
GG 163520
GG 163520
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 520 The 520 Fine Finish Flat Tip produces a 10 to 12 inch fan pattern and a 0.020 inch orifice. $66.00
Ff Flat Tip, Spray Tc
GG 163522
GG 163522
FF FLAT TIP, SPRAY TC
Graco 163522 Fine Finish Flat Tip, 522
The 522 Fine Finish Flat Tip produces a 10 to 12 inch fan pattern and a 0.022 inch orifice.
- Model: Fine Finish
- Series: Flat Tip
- Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material
- For Use With: Silver Plus Airless Spray Gun
- Maximum Fan Width (cm): 30.5
- Maximum Fan Width (in): 10
- Maximum Fan Width (mm): 305
- Maximum Flow Rate (GPM): 0.52
- Maximum Flow Rate (L/min): 1.97
- Maximum Working Pressure (bar): 207
- Maximum Working Pressure (kPa): 20700
- Maximum Working Pressure (psi): 3000
- Minimum Fan Width (in): 10
- Minimum Fan Width (mm): 254
- Orifice Diameter (in): 0.022
- Pattern Size (in): 10 to 12
- Pattern Size (mm): 254 to 304.8
$66.00
SILVER FLAT TIP, SPRAY TC
GG 163529
GG 163529
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 529 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 529 Silver Flat Tip has a 0.029 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY, TC
GG 163531
GG 163531
SILVER FLAT TIP, SPRAY, TC
Silver Flat Tip, 531 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 531 Silver Flat Tip has a 0.031 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163539
GG 163539
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 539 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 539 Silver Flat Tip has a 0.039 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163541
GG 163541
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 541 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 541 Silver Flat Tip has a 0.041 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163543
GG 163543
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 543 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 543 Silver Flat Tip has a 0.043 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163545
GG 163545
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 545 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 545 Silver Flat Tip has a 0.045 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163547
GG 163547
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 547 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 547 Silver Flat Tip has a 0.047 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163551
GG 163551
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 551 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 551 Silver Flat Tip has a 0.051 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163555
GG 163555
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 555 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 555 Silver Flat Tip has a 0.055 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163557
GG 163557
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 557 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 557 Silver Flat Tip has a 0.057 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
Silver Flat Tip, Spray TC
GG 163561
GG 163561
SILVER FLAT TIP, SPRAY TC
Graco 163561 Silver Flat Tip, 561
Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 561 Silver Flat Tip has a 0.061 inch orifice and produces a 10 to 12 inch fan.
Application: Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.- Model: Silver
- Series: Flat Tip
- Maximum Fan Width (cm): 25
- Maximum Fan Width (in): 10
- Maximum Fan Width (mm): 305
- Maximum Flow Rate (GPM): 3.99
- Maximum Flow Rate (L/min): 15.1
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (psi): 5000
- Minimum Fan Width (in): 10
- Minimum Fan Width (mm): 254
- Orifice Diameter (in): 0.061
- Pattern Size (in): 10 to 12
- Pattern Size (mm): 254 to 304.8
$54.25
SILVER FLAT TIP, SPRAY TC
GG 163563
GG 163563
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 563 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 563 Silver Flat Tip has a 0.063 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
SILVER FLAT TIP, SPRAY TC
GG 163571
GG 163571
SILVER FLAT TIP, SPRAY TC
Silver Flat Tip, 571 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 571 Silver Flat Tip has a 0.071 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog. $54.25
FF FLAT TIP, SPRAY TC
GG 163616
GG 163616
FF FLAT TIP, SPRAY TC
Fine Finish Flat Tip, 616 The 616 Fine Finish Flat Tip produces a 12 to 14 inch fan pattern and a 0.016 inch orifice. $66.00