GRACO INC. S10595

GG FK5113

KIT, 515 FG SS, PT, PO, PT

Graco FK5113 SaniForce 515 FG Complete Fluid Repair Kit with SS Seat, PT Ball, PO Diaphragm, PT Seal

GG HFRSA1

HFR SILICONE SYSTEM,SI,230/1,1:1,CS,NO FE

Graco HFRSA1 1:1 Ratio Carbon Steel HFR Metering System for Sealants & Adhesives

With its accuracy and repeatability, the Graco HFR lets you hit a specific ratio and volume - the first time, and every time. Static, dynamic, or impingement mixing options along with positive displacement pump technology will improve throughput while reducing scrap and rework. Whether drawing beads, putting down small or large material shots or using a robot with continuous flow, the modular design of the Graco HFR provides the flexibility to configure the components to your specific application.

Application: Some application examples include batch processing, potting, encapsulating, vacuum infusion, pultrusion and automated bead applications. Designed for flexibility, the Graco HFR Metering System is an advanced and reliable meter, mix and dispense solution for two-component materials, including adhesives, urethanes, polysulfides, epoxies, silicones and resins.

• More Technology, More Support, Less Investment

  • Constant pressure or constant flow rate material outputs
  • Lower cost than basic shot meters or gear pumps
  • Faster lead times - configured equipment solutions delivered faster than a custom engineered solution
  • Easier maintenance with standard parts - Eliminate costly pump rebuilds and the need for backup pumps
  • In-person support and service through Graco's global distribution network

• Graco HFR technology succeeds the former Reactor IP

  • Precision, on-ratio dispense reduces material waste for a better bottom line
  • More technology for less money
  • Fully configurable
  • Stores 100 shot sizes and five sequences of 20 positions each
  • Compact footprint saves space in your plant
  • Intuitive, easy-to-use controls simplify training
  • Integrated USB lets you download process data onto a flash drive for further analysis

• Model: HFR
• Series: S

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPS

• Amperage (A): 55
• Applicator Type: Automatic

GG L040S8

LOWER,CHEMICAL,040,S8

Graco L040S8 Z-Pump, 40 cc, Elite, S8

Z-Pumps are positive displacement pump components for use with the Graco and meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls.

• Elite coatings and 7/8 inch (2.22 cm) checks easily manage material wear from thermal interface material (TIMs) or other abrasive applications.
• Precision control eliminates pressure spikes and guarantees on ratio dispense.
• Elite high-wear pump seals reduce maintenance downtime and repair costs.

• Model: Z-Pump
• Series: S8

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Industrial

• Ball Check Size (in): 7/8
• Ball Material: Silicon Nitride

• Coating Type: Elite

GG L075S4

GG L080S4

LOWER, CHEMICAL, 080, SST, UCUP

Graco L080S4 Z-Pump, 80 cc, Severe Duty, S4

Z-Pumps are positive displacement pump components for use with the Graco and meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls.

• Severe Duty coatings and 1/2 inch (1.27 cm) checks easily manage material wear from silicones, sealants, epoxies, and structural adhesives.
• Precision control eliminates pressure spikes and guarantees on ratio dispense.
• Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.

• Model: Z-Pump
• Series: S4

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Industrial

• Ball Check Size (in): 1/2
• Ball Material: Silicon Nitride

• Coating Type: Severe Duty

• Feed Type: Pressure Feed

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: SAE

• For Use With: EFR, HFR

• Maximum Flow Rate (GPM): 1.27

• Maximum Operating Temperature ( degree F): 180
• Maximum Output (cm cu ): 80

• Maximum Pump Speed (CPM): 60

• Maximum Viscosity (cP): 3000000

GG L080S8

LOWER,CHEMICAL,080,S8

Graco L080S8 Z-Pump, 80 cc, Elite, S8

Z-Pumps are positive displacement pump components for use with the Graco and meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls.

• Elite coatings and 7/8 inch (2.22 cm) checks easily manage material wear from thermal interface material (TIMs) or other abrasive applications.
• Precision control eliminates pressure spikes and guarantees on ratio dispense.
• Elite high-wear pump seals reduce maintenance downtime and repair costs.

• Model: Z-Pump
• Series: S8

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Industrial

• Ball Check Size (in): 7/8
• Ball Material: Silicon Nitride

• Coating Type: Elite

GG L250SM

GG LC0012

GG LC0018

GG LC0056

GG LC0060

GG LC0063

GG LC0082

GG LC0112

GG LC0131

GG LC0308

GG LC0886

GG LC1200

GG LC1400

GG LCB100

GG LCB120

GG LCB600

GG LCC080

GG LCC280

GG LCC520

GG LCE600

GG LCF140

GG M0221

GG M1060A-1-1-0.50

GG P14DCS

GG P26LCS

CHECK-MATE PUMP,26:1 6500/500 CS SD

Graco P26LCS 26:1 - 500cc Check-Mate Pump with NXT 6500 Air Motor, Severe Duty Carbon Steel Construction

Graco Supply Pumps reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials to metering and dispensing systems. Maximize your plant's production capacity.

Application: Long-lasting durability - Check-Mate pumps are a time-tested, proven performer

• NXT 6500 Air Motor
  
  • Low Noise
  • Modular design for easier maintenance
  • Rugged body armor won't rust or dent
  • Highest technology air motor on the market
• 500cc Check-Mate Lower
  
  • Severe Duty coatings on rods and cylinder Extends production time

• Xtreme Coupler - No tool connection

  • Quick-disconnect coupler for easy maintenance

  Replaceable 1 1/2" -11 1/2 NPT Male Outlet Fitting

  • Reduces repair costs

• Replaceable Seat

  • Minimizes service costs

• Cast Outlet and Inlet Housing

  • Improves structural integrity

• NEW Xtreme Coupler

  • Quick-disconnect coupler for easy maintenance

• Replaceable Outlet Fitting

  • Reduces repair costs

• Piston Valve with Floating Piston Seal

  • For maximum pressure balance over a range of material viscosities

• Replaceable Seat

  • Minimizes service costs

• Floating Priming Plate

  • Provides uniform flow

• Cast Outlet and Inlet Housing

  • Improves structural integrity

• NEW Cartridge Throat Packings

  • Allows for easy servicing without removing from ram

• Modular Air Valve

  • De-icing controls
  • Up to 50% quieter than previous models
  • Modular air valve - eliminates stalling, easy-to-repair

• Hard Part Coatings

  • Standard Severe Duty coating on rods and cylinder maximizes wear life

• Model: Check-Mate

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

GG P26LSS

GG P40HC1

GG P40LCM

GG P42LCM

GG PF3521

GG SDU.A05AAA1AA0C21

SANIFORCE DRUM UNLOADER SYSTEM, RAM, HYGIENIC

Graco SDU.A05AAA1AA0C21 SaniForce Ram Unit, Stainless Steel Frame, 12:1 PP, Inflatable Seal, Exposed Controls

SaniForce Drum Unloader systems are built to handle your thickest, toughest food, personal care, and pharmaceutical ingredient transfer. With up to 99% evacuation rates the SaniForce systems reduce product waste while providing a solution to transfer products up to 2,000,000 cps utilizing sanitary designed high pressure piston pumps. Ram systems increase food safety by creating a sealed system with the container and improve worker ergonomics by preventing injury due to manual scooping and dumping of containers and ingredients. The inflatable seal system it is flexible enough to accomodate multiple drum shapes and sizes. With multiple pump, control, plate, and frame options the systems are configurable to match requirements of most users applications.

• Reduce material waste with up to 99% material evacuation
• Improve worker ergonomics by eliminating hazards associated with scooping and dumping options
• Improve food safety by creating a sealed system with the container and inflatable seal design - eliminates food contamination from air borne or worker contaminates
• Configurable systems to meet requirements of almost any ingredient unloading application

• Model: SaniForce 2.0
• Series: Drum Unloader

• Ambient/Warm Melt/Hot Melt: 90
• Application: Food, Personal Care

• Compatible Drum Height (cm): 101.6
• Compatible Drum Height (in): 40
• Compatible Drum Height (mm): 1016
• Compatible Drum Inside Diameter (cm): 54.6-59.0
• Compatible Drum Inside Diameter (in): 21.5-23.25
• Compatible Drum Inside Diameter (mm): 546-590

• Container Type: Drum
• Control Panel Material: Aluminum, Plastic
• Control Panel Type: Exposed

• Finish/Coating: Bead Blast

• Frame Material: Stainless Steel

• Material Certification: EN 1024:2004 Type 2.1 (Standard)
• Material Container Volume (gal): 55
• Material Container Volume (l): 208

• Maximum Air Inlet Pressure (bar): 6.89
• Maximum Air Inlet Pressure (kg/cm 2): 7.03
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 8.5
• Maximum Flow Rate (L/min): 32.2

• Maximum Fluid Pressure (bar): 83
• Maximum Fluid Pressure (kPa): 8300
• Maximum Fluid Pressure (psi): 1200

• Maximum Fluid Pressure (bar): 83
• Maximum Fluid Pressure (kPa): 8300
• Maximum Fluid Pressure (psi): 1200

• Maximum Height (cm): 295
• Maximum Height (ft): 9.7
• Maximum Height (in): 116
• Maximum Height (m): 2.95
• Maximum Height (mm): 2946

• Maximum Operating Temperature ( degree C): 32
• Maximum Operating Temperature ( degree F): 90

• Maximum Working Pressure (bar): 83
• Maximum Working Pressure (kPa): 8300
• Maximum Working Pressure (MPa): 8.3
• Maximum Working Pressure (psi): 1200

• Minimum Height (cm): 194
• Minimum Height (ft): 6.4
• Minimum Height (in): 76.2
• Minimum Height (m): 1.94
• Minimum Height (mm): 1935

• Overall Depth (cm): 69.8
• Overall Depth (in): 27.5
• Overall Depth

GG SDU.B05AAA6AA0C21

SANIFORCE DRUM UNLOADER SYSTEM, RAM, HYGIENIC

Graco SDU.B05AAA6AA0C21 SaniForce Ram Unit, Carbon Steel Frame, 12:1 PP, Inflatable Seal, Exposed Controls

SaniForce Drum Unloader systems are built to handle your thickest, toughest food, personal care, and pharmaceutical ingredient transfer. With up to 99% evacuation rates the SaniForce systems reduce product waste while providing a solution to transfer products up to 2,000,000 cps utilizing sanitary designed high pressure piston pumps. Ram systems increase food safety by creating a sealed system with the container and improve worker ergonomics by preventing injury due to manual scooping and dumping of containers and ingredients. The inflatable seal system it is flexible enough to accomodate multiple drum shapes and sizes. With multiple pump, control, plate, and frame options the systems are configurable to match requirements of most users applications.

• Reduce material waste with up to 99% material evacuation
• Improve worker ergonomics by eliminating hazards associated with scooping and dumping options
• Improve food safety by creating a sealed system with the container and inflatable seal design - eliminates food contamination from air borne or worker contaminates
• Configurable systems to meet requirements of almost any ingredient unloading application

• Model: SaniForce 2.0
• Series: Drum Unloader

• Ambient/Warm Melt/Hot Melt: 90
• Application: Food, Personal Care

• Compatible Drum Height (cm): 101.6
• Compatible Drum Height (in): 40
• Compatible Drum Height (mm): 1016
• Compatible Drum Inside Diameter (cm): 54.6-59.0
• Compatible Drum Inside Diameter (in): 21.5-23.25
• Compatible Drum Inside Diameter (mm): 546-590

• Container Type: Drum
• Control Panel Material: Aluminum, Plastic
• Control Panel Type: Exposed

• Finish/Coating: Painted

• Frame Material: Carbon Steel

• Material Certification: EN 1024:2004 Type 2.1 (Standard)
• Material Container Volume (gal): 55
• Material Container Volume (l): 208

• Maximum Air Inlet Pressure (bar): 6.89
• Maximum Air Inlet Pressure (kg/cm 2): 7.03
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 8.5
• Maximum Flow Rate (L/min): 32.2

• Maximum Fluid Pressure (bar): 83
• Maximum Fluid Pressure (kPa): 8300
• Maximum Fluid Pressure (psi): 1200

• Maximum Fluid Pressure (bar): 83
• Maximum Fluid Pressure (kPa): 8300
• Maximum Fluid Pressure (psi): 1200

• Maximum Height (cm): 295
• Maximum Height (ft): 9.7
• Maximum Height (in): 116
• Maximum Height (m): 2.95
• Maximum Height (mm): 2946

• Maximum Operating Temperature ( degree C): 32
• Maximum Operating Temperature ( degree F): 90

• Maximum Working Pressure (bar): 83
• Maximum Working Pressure (kPa): 8300
• Maximum Working Pressure (MPa): 8.3
• Maximum Working Pressure (psi): 1200

• Minimum Height (cm): 194
• Minimum Height (ft): 6.4
• Minimum Height (in): 76.2
• Minimum Height (m): 1.94
• Minimum Height (mm): 1935

• Overall Depth (cm): 69.8
• Overall Depth (in): 27.5
• Overall Depth (mm):

GG SP401007

GG SP433002

GG SP433003

GG SP433006

GG 215339

GG 215623

GG 217524

GG 218309

GG 218746

GG 220297

GG 220900

GG 222012

GG 222621

GG 222772

GG 222920

GG 223365

GG 223479

GG 223480

GG 223701

GG 223952

GG 224447

GG 235068

GG 235074

GG 235540

GG 236279

GG 236417

GG 236433

GG 236456

GG 236591

GG 236778

GG 236892

GG 237541

GG 237958

GG 239062

GG 240897

GG 241562

GG 241762

GG 243803

GG 243295

GG 243994

GG 244627

GG 245854

GG 246375

GG 247848

GG 247858

GG 247860

GG 249146

GG 249427

GG 249922

GG 249924

GG 24A274

GG 24A276

GG 24A329

GG 24A338

GG 24A362

GG 24A683

GG 24A686

GG 24A800

GG 24B359

GG 24B707

GG 24C187

GG 24C193