DYNABRADE INC. S12699

DY 57112

DY 57264

DY 57427

DY 57430

DY 57431

DY 57433

DY 57438

DY 57445

DY 57454

3/8in (10 mm) Thickness Urethane, Medium Density, For PSA Discs

The premium self skinning urethane foam provide optimum support and flexibility for the widest range of sanding applications with coarse to ultra fine grit abrasives.

3/8in (10 mm) thick, medium density pads. Pads mount with four screws.

DY 57822

DY 57891

DY 57951

3/8in (10 mm) Thickness Urethane, Medium Density, For Reattachable Discs

The premium self skinning urethane foam provide optimum support and flexibility for the widest range of sanding applications with coarse to ultra fine grit abrasives.

3/8in (10 mm) thick, medium density pads. Pads mount with four screws.

DY 59075

DY 59133

DY 59337

DY 61440

10 Gal. (38 L), Division II, North America/South America

Pneumatic Portable Vacuum for use on non-metallic surfaces such as wood, plastics. Powerful suction is ideal for dry-only, industrial applications, Includes HEPA H14 Filter with 99.995% efficiency on 0.3 micron.

Two additional HEPA Filters included within power-head,making it eligible for IP6X. Top-quality stainless steel body and 10 gallon (38 liter) recovery tank. Unit is static-dissipating (kit included) and conductive. Aerosol leak tested for quality assurance. Equipped with easy-glide cart. Also connects to optional 61483 Cart.

DY 61440V

DY 61470

1.5 Gal. (6 L), Division 1, Stainless Steel, Conductive, N. America

Pneumatic Portable Vacuum For use on metallic surfaces such as aluminum, magnesium, titanium, commercial alloys. Collects maximum of 5 lbs. (2.27 kg) of dust. Designed for dry-only source capture, where fine dust must be recovered. Legally certified as explosion-proof and dust ignition-proof. Includes HEPA H14 Filter with 99.995% efficiency on 0.3 micron.

Stainless steel recovery tank (SAE 304). Easy recovery bag access. Unit is static-dissipating (kit included) and conductive. Aerosol leak tested for quality assurance. Wall mount Hardware Included. Conductive Cleaning Kit available separately

DY 64800

DY 64995

DY 64996

DY 69359

DY 69360

DY 78007

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78008

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78016

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78017

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 79012

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79013

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79028

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79033

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79032

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79788

25 ct. Box

Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life

Ultra-flexible and tear resistant high performance 3mil film backing generates the finest finishes

DY 79790

25 ct. Box

Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life

Ultra-flexible and tear resistant high performance 3mil film backing generates the finest finishes

DY 79914

100 count per box

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 56052

DY 57114

DY 69272

DY 94300

Swivels 360 degrees at two pivot points allowing the air hose to drop directly to the floor.

DY 95218

DY 01013

DY 01028

DY 01206

DY 01476

DY 45263

DY 56047

DY 12132

DY 15312

DY 56027

DY PAD SWAP

DY 48410

.7 hp, 15,000 RPM, Front Exhaust

• HP: 0.7
• Max. RPM: 15000.0
• Motor RPM: 15000

DY 56181

5/8in (16 mm) Thickness Urethane, Medium Density, 5/16in -24 Male Thread

DY 57432

DY 77760

For stock removal, deburring, blending, edge-chamfering and rust removal. Can also be used for general cleaning and finishing.

• Max. RPM: 13000.0
• Motor RPM: 13,300

DY 78234

Polishing Product for use on Aluminum. Begin with 78234 (Brown), followed by 78235 (Mint Green), finish with 78233 (Christmas Green).

Polishing Product for use on Brass. Begin with 78234 (Brown), followed by 78235 (Mint Green), finish with 78236 (Red Rouge)

DY 78271

Extremely uniform sizes of Silicon Carbide abrasive bonded to a very flexible cloth backing using a flexible and resilient adhesive results in an abrasive belt that removes material uniformly and rapidly generating a uniform scratch pattern without deep or random scratches like a rigid fixed abrasive belt.

The uniform scratch pattern allows for the use of finer grades of abrasives in fewer steps to achieve the final finish

DY 79087

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 90245

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 90246

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 90259

high perfomance aluminum oxide produces an aggressive cutting action

smear resistant resin reduces rework and cycle times

DY 90292

High performance aluminum oxide produces an aggressive cutting action

smear resistant resin reduces rework and cycle times

DY 90590

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 90592

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

DY 91527

Extreme Orange Premium Film Disc 50 Pack

Manufactured with a premium P graded aluminum oxide abrasives for fast cut and long life

Extremely tough and tear resistant high performance 3mil film backing generates the finest finishes and up to 4X the life of paper discs

DY 93892

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 93893

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 93985

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

DY 94941

DY 95263

DY 95800

DY 95895

Insert allows one to mount to tool's vacuum outlet directly.

DY 96107

DY 59020S

DY DGR31

18,000 RPM, Rotational Side Exhaust, 1/4in Collet

Compact, lightweight contemporary tool design permits easy access to tight areas

Thermoplastic rubber tool grip reduces cold air transmission and absorbs vibration

• HP: 0.3
• Max. RPM: 18000.0
• Motor RPM: 18,000