Airpower | DYNABRADE INC. S12699 branded products

DY 52099

Spiral Bevel Gear

Call for pricing

3 (76 MM) DIA. 7 DEGREE OFFSET DEPRESSE

DY 52700

3in (76 mm) Diameter 7 Degree Offset Depressed Center Wheel Grinder

.7 hp, 18,000 RPM, Front Exhaust, 3/8in -24 Spindle Thread

Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.

.7 hp, 18,000 RPM, 3/8in -24 Spindle

HP: 0.7
Max. RPM: 15000.0
Motor RPM: 15000

$675.00

Drill Chuck, 1/4in Cap., 3/8-24 Thd

DY 53030

Drill Chuck, 1/4in Cap., 3/8-24 Thd

$85.81

DY 53052

Chuck Key for 53032 Chuck

$35.86

DY 53090

1/2in Drill

.7 hp, 950 RPM, Pistol Grip, Geared, Rear Exhaust, Keyed Jacobs Chuck

Includes 1/2in drill chuck and key.

High-torque air motor. slow-speed startup trigger.

HP: 0.7
Max. RPM: 950.0
Motor RPM: 950

$1,223.10

DY 53152

Gear Case

$102.45

DY 53174

Bearing

$23.44

DY 53157

Shroud

$102.45

DY 53195

Gear

$48.62

DY 53552

Spindle

$128.46

DY 53581

Turbine Cover

$121.53

DY 53669

Carrier

$126.72

DY 53679

Gear Shaft

$27.83

DY 53880

Housing

$109.36

6in Interface Pad, Dble Sided Hook-Face

DY 53980

6in Interface Pad, Dble Sided Hook-Face

$15.22

DY 54017

3/4in (19 mm) Diameter Mini-Dynorbital Disc Pad, Rubber-Face

Foam, Medium Density, 1/4in -20 Female Thread

$11.43

DY 54514

Blades (Pkg-5)

$86.81

DY 55393

Grip, Vanned Pencil Grinder

$8.57

Rear End Plate, Vanned Pencil Grinder

DY 55401

Rear End Plate, Vanned Pencil Grinder

$39.90

DY 56847

Lever

$23.44

DY 57855

3-2/3in (93 mm) W x 7in (178 mm) L Vacuum Dynabug Disc Pad, Vinyl-Face

3/8in (10 mm) Thickness Urethane, Medium Density, For PSA Discs

$33.57

DY 57867

Pad Base Assembly

$121.53

Housing For Model 57810, 10,000 rpm

DY 57872

Housing For Model 57810, 10,000 rpm

$9.63

DY 59293

Wrench

$18.65

DY 59332

Bearing Plate, w/Offset, Rear

$45.56

DY 59333

Bearing Plate, w/Offset, Front

$45.56

DY 59340

Shroud, Non-Vacuum, Extreme

$30.37

Extreme Exhaust Cover, Non-Vaccum

DY 59342

Exhaust Cover, Non-Vacuum, Extreme

$7.97

DY 61506

Hinge Side Hose Hanger Kit

$83.81

Air Supply Hose, 214140, 3/4 in x 25 ft

DY 62449

Air Supply Hose, 3/4in x 25' long

$500.15

DY 63210

36in (91 cm) W x 72in (183 cm) L Downdraft Sanding Table

460 V, 3 Phase, 60 Hz

Eliminate airborne dust and contaminants while sanding. Working Area of 36in (91 cm) W x 72in (183 cm) L.

Ideal for use with vacuum-ready or non-vacuum tools. Dual filtration - accepts 1-micron pleated paper filters: 20in (508 mm) W x 25in (635 mm) L. Includes three filters.

HP: 1.0

Call for pricing

36 x 72 Top for Downdraft Table

DY 64251

36 x 72 Top for Downdraft Table

Call for pricing

48 x 96 Downdraft Sanding Table 230 V, 60 Hz, Single Phase, 1.5 hp, 2 Motors

DY 64651

48 x 96 Downdraft Sanding Table 230 V, 60 Hz, Single Phase, 1.5 hp, 2 Motors

$12,362.96

DY 64684

HEPA Cartridge Filter

$63.58

DY 64685

Felt Insert ( 9.9 Gallon/ 36 Liter)

$33.04

36in W x 72in L, Downdraft Sanding Table 115V, 1PH. 60Hz

DY 64700

36in (91 cm) W x 72in (183 cm) L Downdraft Sanding Table

115 V, 1 Phase, 60 Hz

Eliminate airborne dust and contaminants while sanding. Working Area of 36in (91 cm) W x 72in (183 cm) L.

Ideal for use with vacuum-ready or non-vacuum tools. Dual filtration accepts 1-micron pleated paper filters: 20in (508 mm) W x 25in (635 mm) L. Includes three filters.

HP: 1.0

Call for pricing

3/4in x18in, Medium NWN DynaBrite Belt

DY 78025

3/4in (19 mm) W x 18in (457 mm) L Medium NWN DynaBrite Belt

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

$6.95

3/4in x18in, Very Fine NWN DynaBrite Belt

DY 78026

3/4in (19 mm) W x 18in (457 mm) L Very Fine NWN DynaBrite Belt

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

$6.95

1in x18in, Medium NWN DynaBrite Belt

DY 78030

1in (25 mm) W x 18in (457 mm) L Medium NWN DynaBrite Belt

2-dimensional open structure non woven surface conditioning material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

$12.38

1-1/2in x 30in, Medium NWM Dynabrite Bel

DY 78034

1-1/2in (38 mm) W x 30in (762 mm) L Medium NWN DynaBrite Belt

2-dimensional open structure non woven surface conditoniing material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

$16.46

1-1/4in (32 mm) Dia. x 1000 Grit A/O Non-Vacuum PSA Film Dynacut, 25 Per Sheet

DY 78157

1-1/4in (32 mm) Diameter x 1,000 Grit A/O Non-Vacuum PSA Film DynaCut Disc

Unit = 1 sheet (25/sheet)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

For spot repair on primed and painted surfaces to remove dust nibs and small paint runs

$17.77

DY 78167

1-1/4in (32 mm) Diameter x 180 Grit S/C Non-Vacuum PSA DynaCut Disc

25 Count Bag

Creates thinner scratch than aluminum oxide due to its sharper grain. Silicon carbide will cut faster but does not last as long as aluminum oxide.

Prepare primed and painted surfaces for finishing.

$17.68

DY 78168

1-1/4in (32 mm) Diameter x 220 Grit S/C Non-Vacuum PSA DynaCut Disc

25 Count Bag

Creates thinner scratch than aluminum oxide due to its sharper grain. Silicon carbide will cut faster but does not last as long as aluminum oxide.

Prepare primed and painted surfaces for finishing.

$17.68

DynaStrip Disc w/Fiberglass Backing

DY 78377

4-1/2in (114 mm) Diameter x 7/8in CH Type 27 Extra Coarse DynaStrip Disc w/Fiberglass Backing

Thick, strong synthetic fibers and coarse abrasive with a smear-resistant adhesive for quick and easy cleaning and conditioning.

Clean welds, removal of paint/coatings, scale and oxidation.

$16.46

DY 78381

6in Diameter x 1/2 W x 1/2in CH Extra Coarse DynaStrip Red Wheel with Hole

The best choice for rough cleaning and stripping of coatings, oxidation, weld slag and rust without damanging the underlying surface

The abrasive is dispersed and coated thoughout the entire disc providing a constant and consistent cut rate

$20.41

Condition Disc, Non Woven, Sold as each, 10 per Pk

DY 78415

5in (127 mm) Diameter x Medium Hook Non-Vacuum DynaBrite NWN Surface Conditioning Disc

2-dimensional open structure non woven surface conditioning material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

$7.30

Dyna Cut Belt, 40 Grit, 3 In x 24 In.

DY 79050

3in (76 mm) W x 24in (610 mm) L 40 Grit A/Z DynaCut Belt

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

$8.40

Dyna Cut Belt, 60 Grit, 3 In x 24 In.

DY 79051

3in (76 mm) W x 24in (610 mm) L 60 Grit A/Z DynaCut Belt

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

$7.63

Dyna Cut Belt, 120 Grit, 3 In x 24 In.

DY 79053

3in (76 mm) W x 24in (610 mm) L 120 Grit A/Z DynaCut Belt

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

$7.63

1/4 X 24 Inch 80 Grit

DY 79058

1/4in (6 mm) W x 24in (610 mm) L 80 Grit A/Z DynaCut Belt

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

$1.85

1/2 In x 24 In Long, 60 Grit A/Z Belt

DY 79061

1/2in (13 mm) W x 24in (610 mm) L 60 Grit A/Z DynaCut Belt

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

$1.57

Sanding Belt, 80 Grit, 1/2 x 24 In.

DY 79062

1/2in (13 mm) W x 24in (610 mm) L 80 Grit A/Z DynaCut Belt

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

$1.79

Sanding Belt, 120 Grit, 1/2 x 24 In.

DY 79063

1/2in (13 mm) W x 24in (610 mm) L 120 Grit A/Z DynaCut Belt

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

$1.79

1/2 (13 mm) W x 18 (457 mm) L 60 Grit

DY 79123

1/2in (13 mm) W x 18in (457 mm) L 60 Grit DynaCut Premium Ceramic Belt

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

$2.63

Sanding Belt, 80 grit, 1/8 x 24

DY 79143

1/8in (3 mm) W x 24in (610 mm) L 80 Grit DynaCut Premium Ceramic Belt

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

$2.34

DynaCut Ceramic Belt, 40 grit, 1/2 x 24

DY 79147

1/2in (13 mm) W x 24in (610 mm) L 40 Grit DynaCut Premium Ceramic Belt

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.

$4.31

Assorted Pack Sandpaper

DY 79201

1/2in (13 mm) W x 18in (457 mm) L Belt Assortment Pak

(5) 79031, (5) 79032 Z/A Belts and (1) 78020 NWN Belt

Dynabrade's Abrasive Belt Assortment Pak includes: 5-60 Grit DynaCut Zirconia Alumina Coated Belts, 5-80 Grit DynaCut Zirconia Alumina Coated Belts and 1-Medium Surface Conditioning (Non-Woven Nylon) Belt.

DynaCut Zirconia Alumina Coated Abrasive Belts are ideal for metalworking, finishing on stainless steel, nickel alloy, forged steel and aluminum.

$31.58

Sanding Discs, 3 1/2in, 80 Grit

DY 79230

3-1/2in (89 mm) Diameter x 80 Grit A/O Non-Vacuum PSA DynaCut Disc

Unit = 1 Roll (100/Roll)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$40.98

80 Grit PSA Roll Non Vac

DY 79240

5in (127 mm) Diameter x 80 Grit A/O Non-Vacuum PSA DynaCut Disc

Unit = 1 Roll (100/Roll)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$40.98

Sanding Disk, 5in, Hook and Loop, Vac

DY 79948

5in (127 mm) Diameter x 180 Grit A/O Vacuum Hook-Face DynaCut Disc

Unit = 1 box (100/box)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$54.69

5 In Sanding Disc, 220 Grit

DY 79949

5in (127 mm) Diameter x 220 Grit A/O Vacuum Hook-Face DynaCut Disc

Unit = 1 box (100/box)

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$54.69

5 Inch, 120 Grit A/O, Hook-Face

DY 79962

5in (127 mm) Diameter x 120 Grit A/O Hook-Face Multi-Hole Vacuum DynaCut Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$0.98

5 Inch, 180 Grit A/O, Hook-Face

DY 79964

5in (127 mm) Diameter x 180 Grit A/O Hook-Face Multi-Hole Vacuum DynaCut Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$0.98

5in Dia., 220 Grit, Hook-Face Disc

DY 79965

5in (127 mm) Diameter x 220 Grit A/O Hook-Face Multi-Hole Vacuum DynaCut Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$0.98

6 Inch, 80 Grit A/O, Hook-Face

DY 79970

6in (152 mm) Diameter x 80 Grit A/O Hook-Face Multi-Hole Vacuum DynaCut Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.23

6 Inch, 120 Grit A/O, Hook-Face

DY 79971

6in (152 mm) Diameter x 120 Grit A/O Hook-Face Multi-Hole Vacuum DynaCut Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.16

6 Inch, 180 Grit A/O, Hook-Face

DY 79973

6in (152 mm) Diameter x 180 Grit A/O Hook-Face Multi-Hole Vacuum DynaCut Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.16

Foot Switch and Hose Assy

DY 80015

Foot Switch and Hose Assy

$346.42

Dynamount Bench Mount/80017

DY 80021

Dynamount Bench Mount/80017

$291.18

Bearing Box

DY 89301

Bearing Box

Call for pricing

Gear Box Housing

DY 89314

Gear Box Housing

$51.26

Nut

DY 89317

Nut

Call for pricing

Spiral Bevel Pinion

DY 89318

Spiral Bevel Pinion

Call for pricing

Ball Bearing

DY 89324

Ball Bearing

$15.86

Belt, Abrasive, 3/4in x 18in, 60 Grit

DY 91123

3/4in (19 mm) W x 18in (457 mm) L 60 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$1.45

120 Grit Aluminum Oxide Belt

DY 91125

3/4in (19 mm) W x 18in (457 mm) L 120 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$1.45

11-1/4in x 120 Grit Non-Vac Hook-Face

DY 91301

11-1/4in (286 mm) Diameter x 120 Grit A/O Non-Vacuum Hook-Face DynaCut Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$8.16

11-1/4in x 180 Grit Non-Vac Hook-Face

DY 91302

11-1/4in (286 mm) Diameter x 180 Grit A/O Non-Vacuum Hook-Face DynaCut Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$8.16

1/2in x12in, 60 Grit A/O Dynacut Belt

DY 91428

1/2in (13 mm) W x 12in (305 mm) L 60 Grit A/O DynaCut Belt

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all file belt applications

$1.29

Carbide Burr, 1/8 In. (3mm) Dia., SL-42

DY 93347

Carbide Burr, 1/8in (3 mm) Diameter, SL-42 D/C Burr, Taper-Radiused End, 1/2in Flute L, 1/8in Shank

Longer life than high speed steel burrs.

Double cut burrs offer broad utility on a wide range of materials due to their universal cutting style

$16.97

Carbide Burr, 1/8 In. (3mm) Dia., SM-42

DY 93348

Carbide Burr, 1/8in (3 mm) Diameter, SM-42 D/C Burr, 14 Degree Cone, 7/16in Flute L, 1/8in Shank

Longer life than high speed steel burrs.

Double cut burrs offer broad utility on a wide range of materials due to their universal cutting style

$16.97

Rotory Fille Kit, Carbide

DY 93350

Carbide Burr 8-Piece Burr Kit, 1/4in Shank

Longer life than high speed steel burrs.

Double cut burrs offer broad utility on a wide range of materials due to their universal cutting style

$333.04

Eyelet Star 3in 220 Grit

DY 93562

3in (76 mm) Diameter 220 Grit A/O Eyelet Sanding Star

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

$15.79

Eyelet Star 320Grit

DY 93563

3in (76 mm) Diameter 320 Grit A/O Eyelet Sanding Star

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

$15.79

Eyelet Star 400Grit

DY 93564

3in (76 mm) Diameter 400 Grit A/O Eyelet Sanding Star

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

$15.79

4 (102 mm) Dia. 180 Grit A/O Eyelet San

DY 93568

4in (102 mm) Diameter 180 Grit A/O Eyelet Sanding Star

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

$28.98

4 (102 mm) Dia. 220 Grit A/O Eyelet San

DY 93569

4in (102 mm) Diameter 220 Grit A/O Eyelet Sanding Star

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

$28.98

3/4 (19 mm) Dia. 220 Grit A/O Eyelet

DY 93583

3/4in (19 mm) Diameter 220 Grit A/O Eyelet Sanding Star

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

$2.54

1 (25 mm) Dia. 220 Grit A/O Eyelet Sand

DY 93590

1in (25 mm) Diameter 220 Grit A/O Eyelet Sanding Star

Premium aluminum oxide abrasive resin bonded to a flexibe cloth backing provides consintuous cutting action without gouging.

A good choice for denibbing and sanding white wood raised panels , sanding carvings ad other comples shapes without chaging the shape detail

$3.15

Diamond Cut-Off Wheel, CH 40/50 Grit

DY 93650

5in (127 mm) Diameter x 3/4in (19 mm) CH 40/50 Grit Side Spoked Diamond Cut-Off Wheel

The hardest mineral is a must for cutting and finishing materials harder than 60 Rockwell C such as thermal sprayed tungsten carbide, chrome oxide, glass, composites, stone, chilled iron and forged steel.

Excellent for cutting and trimming fiberglass and composite mold -flashing

$242.78

Side Spoked Diamond Cut-Off Wheel

DY 93907

3in (76 mm) Diameter Side Spoked Diamond Mounted Cut-Off Wheel

The hardest mineral is a must for cutting and finishing materials harder than 60 Rockwell C such as thermal sprayed tungsten carbide, chrome oxide, glass, composites, stone, chilled iron and forged steel.

Excellent for cutting and trimming fiberglass and composite mold -flashing

$254.99

Triangle Abrasive Disc, 80 Grit , (50 Per Pack)

DY 93913

Triangular x 80 Grit A/O Non-Vacuum Hook-Face DynaCut Dynafine Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.32

Triangle Abrasive Disc, 120 Grit, (50 Per Pack)

DY 93914

Triangular x 120 Grit A/O Non-Vacuum Hook-Face DynaCut Dynafine Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.32

Triangle Abrasive Disc, 180 Grit

DY 93916

Triangular x 180 Grit A/O Non-Vacuum Hook-Face DynaCut Dynafine Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.32

5 Inch Diamond Cut Off Wheel

DY 93921

5in (127 mm) Diameter x 3/4in (19 mm) CH 40/50 Grit Continuous Rim Diamond Cut-Off Wheel

The hardest mineral is a must for cutting and finishing materials harder than 60 Rockwell C such as thermal sprayed tungsten carbide, chrome oxide, glass, composites, stone, chilled iron and forged steel.

Excellent for cutting and trimming fiberglass and composite mold -flashing

$214.23

Triangle Abrasive Disc, 220 Grit

DY 93927

Triangular x 220 Grit A/O Hook-Face Non-Vacuum DynaCut Dynafine Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.32

Triangle Sand Disk, Hook and Loop

DY 93928

Triangular x 320 Grit A/O Hook-Face Non-Vacuum DynaCut Dynafine Disc

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$1.32

Finger Sand Paper

DY 93940

3/8in (10 mm) W x 2in (51 mm) L 120 Grit A/O DynaCut Strip

20 Pack

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$5.96

Finger Sand Paper

DY 93941

3/8in (10 mm) W x 2in (51 mm) L 180 Grit A/O DynaCut Strip

20 Pack

Coated with premium P grade aluminum oxide that is sharp and free cutting on a broad range of suraces and matrerials like hard and sof woods, plastics, fiberglass, composites and fabricated metals

The durable Cwt paper backing resist tearing and is still moderately flexible

$5.96

Hub Assembly

DY 94516

Hub Assembly

$70.25